[client, proxy] IPv6 in-place apply + accept-loop hardening on netstack listeners

Two related fixes for the embedded netbird client and the per-account
inbound listeners that ride on its gVisor netstack.

client/internal/engine.go — replace hasIPv6Changed with reconcileIPv6:

  - First v6 assignment (current had no v6, conf carries one) is applied
    in place via WGIface.UpdateAddr instead of returning ErrResetConnection.
    Pre-fix, every embedded client whose account had IPv6 enabled would
    reset on its first NetworkMap sync — boot config has no v6, the sync
    introduces one, the engine tore itself down to "apply" it. That
    teardown destroys the gVisor netstack and orphans every listener
    bound on it, which is what made the proxy's per-account :80/:443
    silently stop accepting traffic.
  - v6 removed clears in place.
  - v6 swapped to a different non-empty value still resets (gVisor
    netstack can't safely swap its address at runtime).
  - Mutates e.config.WgAddr to match the applied state so subsequent
    PeerConfig comparisons are stable.

proxy/internal/tcp/accept.go (new) + proxy/inbound.go +
proxy/internal/tcp/router.go — harden the two Accept() loops on
netstack-backed listeners:

  - IsClosedListenerErr recognises net.ErrClosed AND gVisor's
    "endpoint is in invalid state" — the latter survives gonet's
    *net.OpError wrapping in a way errors.Is(.., net.ErrClosed) does
    not. Without this the loop spins CPU-hot after the underlying
    netstack is destroyed (peer rekey, embedded-client reset, account
    churn), emitting one log line per iteration.
  - AcceptBackoff implements the exponential backoff that
    net/http.Server.Serve uses on transient Accept errors: 5ms doubling
    up to 1s. Defence-in-depth so an unknown sticky error cannot burn
    a CPU core even if IsClosedListenerErr misses its signature.

proxy/internal/roundtrip/netbird.go — emit a single structured INFO
line summarising every embed.Options flag (account_id, service_id,
public_key, management_url, wg_port, block_inbound, block_lan_access,
disable_ipv6, no_userspace, presence of credentials) when each
per-account embedded client is created. Secrets reduced to a "present"
boolean — never logged verbatim. Diagnostic-only; no behavior change,
but it makes the "why is this embedded peer misbehaving" loop a single
log read instead of a code dive.

Tests (real listeners, scripted errors, no mocks of production code):
  - engine_reconcileipv6_test.go: 8 cases for every transition (first
    assignment, no change, removed, prefix-length changed, value
    changed, invalid bytes, UpdateAddr error) plus a updateConfig
    integration check that the fix actually fires on a v6-added
    PeerConfig.
  - accept_test.go: IsClosedListenerErr matrix + AcceptBackoff
    progression / cap / reset / cancel-during-wait / cancel-before-call.
  - router_test.go, inbound_test.go: scriptedAcceptListener +
    TestRouter_Serve_ExitsOnGVisorInvalidEndpoint and
    TestFeedRouterFromListener_ExitsOnGVisorInvalidEndpoint —
    regression guards that fail in 2 s if the loop ever spins.

.github/workflows/golang-test-darwin.yml

@@ -45,13 +45,11 @@ jobs:
         run: git --no-pager diff --exit-code
 
       - name: Test
-        # Exclude client/ui: its main.go uses //go:embed all:frontend/dist,
-        # which fails to compile until the frontend has been built. The Wails UI
-        # has no Go-side unit tests, and its release pipeline runs `pnpm build`
-        # before goreleaser.
-        # `go list -e` lets the listing succeed even though the embed fails to
-        # resolve; the grep then drops the broken package by path. Without -e,
-        # go list aborts with empty stdout and `go test` falls back to the repo
-        # root, which has no Go files.
-        run: NETBIRD_STORE_ENGINE=${{ matrix.store }} CI=true go test -tags=devcert -exec 'sudo --preserve-env=CI,NETBIRD_STORE_ENGINE' -timeout 5m -p 1 $(go list -e ./... | grep -v -e /management -e /signal -e /relay -e /proxy -e /combined -e /client/ui)
+        run: NETBIRD_STORE_ENGINE=${{ matrix.store }} CI=true go test -coverprofile=coverage.txt -tags=devcert -exec 'sudo --preserve-env=CI,NETBIRD_STORE_ENGINE' -timeout 5m -p 1 $(go list ./... | grep -v -e /management -e /signal -e /relay -e /proxy -e /combined)
 
+      - name: Upload coverage reports to Codecov
+        uses: codecov/codecov-action@e79a6962e0d4c0c17b229090214935d2e33f8354 #v6.0.1
+        with:
+          token: ${{ secrets.CODECOV_TOKEN }}
+          slug: netbirdio/netbird
+          flags: unit,client

.github/workflows/golang-test-linux.yml

@@ -53,7 +53,7 @@ jobs:
 
       - name: Install dependencies
         if: steps.cache.outputs.cache-hit != 'true'
-        run: sudo apt update && sudo apt install -y -q libgtk-4-dev libwebkitgtk-6.0-dev libsoup-3.0-dev libayatana-appindicator3-dev libgl1-mesa-dev xorg-dev gcc-multilib libpcap-dev
+        run: sudo apt update && sudo apt install -y -q libgtk-3-dev libayatana-appindicator3-dev libgl1-mesa-dev xorg-dev gcc-multilib libpcap-dev
 
       - name: Install 32-bit libpcap
         if: steps.cache.outputs.cache-hit != 'true'
@@ -145,7 +145,7 @@ jobs:
             ${{ runner.os }}-gotest-cache-
 
       - name: Install dependencies
-        run: sudo apt update && sudo apt install -y -q libgtk-4-dev libwebkitgtk-6.0-dev libsoup-3.0-dev libayatana-appindicator3-dev libgl1-mesa-dev xorg-dev gcc-multilib libpcap-dev
+        run: sudo apt update && sudo apt install -y -q libgtk-3-dev libayatana-appindicator3-dev libgl1-mesa-dev xorg-dev gcc-multilib libpcap-dev
 
       - name: Install 32-bit libpcap
         if: matrix.arch == '386'
@@ -158,15 +158,16 @@ jobs:
         run: git --no-pager diff --exit-code
 
       - name: Test
-        # Exclude client/ui: its main.go uses //go:embed all:frontend/dist,
-        # which fails to compile until the frontend has been built. The Wails UI
-        # has no Go-side unit tests, and its release pipeline runs `pnpm build`
-        # before goreleaser.
-        # `go list -e` lets the listing succeed even though the embed fails to
-        # resolve; the grep then drops the broken package by path. Without -e,
-        # go list aborts with empty stdout and `go test` falls back to the repo
-        # root, which has no Go files.
-        run: CGO_ENABLED=1 GOARCH=${{ matrix.arch }} CI=true go test -tags devcert -exec 'sudo' -timeout 10m -p 1 $(go list -e ./... | grep -v -e /management -e /signal -e /relay -e /proxy -e /combined -e /client/ui)
+        run: CGO_ENABLED=1 GOARCH=${{ matrix.arch }} CI=true go test -coverprofile=coverage.txt -tags devcert -exec 'sudo' -timeout 10m -p 1 $(go list ./... | grep -v -e /management -e /signal -e /relay -e /proxy -e /combined)
+
+      - name: Upload coverage reports to Codecov
+        if: matrix.arch == 'amd64'
+        uses: codecov/codecov-action@e79a6962e0d4c0c17b229090214935d2e33f8354 #v6.0.1
+        with:
+          token: ${{ secrets.CODECOV_TOKEN }}
+          slug: netbirdio/netbird
+          flags: unit,client
+
 
   test_client_on_docker:
     name: "Client (Docker) / Unit"
@@ -228,7 +229,7 @@ jobs:
             sh -c ' \
               apk update; apk add --no-cache \
                 ca-certificates iptables ip6tables dbus dbus-dev libpcap-dev build-base; \
-              go test -buildvcs=false -tags devcert -v -timeout 10m -p 1 $(go list -e -buildvcs=false ./... | grep -v -e /management -e /signal -e /relay -e /proxy -e /combined -e /client/ui -e /upload-server)
+              go test -buildvcs=false -tags devcert -v -timeout 10m -p 1 $(go list -buildvcs=false ./... | grep -v -e /management -e /signal -e /relay -e /proxy -e /combined -e /client/ui -e /upload-server)
             '
 
   test_relay:
@@ -284,9 +285,17 @@ jobs:
         run: |
           CGO_ENABLED=1 GOARCH=${{ matrix.arch }} \
           go test ${{ matrix.raceFlag }} \
-            -exec 'sudo' \
+            -exec 'sudo' -coverprofile=coverage.txt \
             -timeout 10m -p 1 ./relay/... ./shared/relay/...
 
+      - name: Upload coverage reports to Codecov
+        if: matrix.arch == 'amd64'
+        uses: codecov/codecov-action@e79a6962e0d4c0c17b229090214935d2e33f8354 #v6.0.1
+        with:
+          token: ${{ secrets.CODECOV_TOKEN }}
+          slug: netbirdio/netbird
+          flags: unit,relay
+
   test_proxy:
     name: "Proxy / Unit"
     needs: [build-cache]
@@ -334,7 +343,15 @@ jobs:
       - name: Test
         run: |
           CGO_ENABLED=1 GOARCH=${{ matrix.arch }} \
-          go test -timeout 10m -p 1 ./proxy/...
+          go test -timeout 10m -p 1 -coverprofile=coverage.txt ./proxy/...
+
+      - name: Upload coverage reports to Codecov
+        if: matrix.arch == 'amd64'
+        uses: codecov/codecov-action@e79a6962e0d4c0c17b229090214935d2e33f8354 #v6.0.1
+        with:
+          token: ${{ secrets.CODECOV_TOKEN }}
+          slug: netbirdio/netbird
+          flags: unit,proxy
 
   test_signal:
     name: "Signal / Unit"
@@ -385,9 +402,17 @@ jobs:
         run: |
           CGO_ENABLED=1 GOARCH=${{ matrix.arch }} \
           go test \
-            -exec 'sudo' \
+            -exec 'sudo' -coverprofile=coverage.txt \
             -timeout 10m ./signal/... ./shared/signal/...
 
+      - name: Upload coverage reports to Codecov
+        if: matrix.arch == 'amd64'
+        uses: codecov/codecov-action@e79a6962e0d4c0c17b229090214935d2e33f8354 #v6.0.1
+        with:
+          token: ${{ secrets.CODECOV_TOKEN }}
+          slug: netbirdio/netbird
+          flags: unit,signal
+
   test_management:
     name: "Management / Unit"
     needs: [build-cache]
@@ -453,10 +478,18 @@ jobs:
           CGO_ENABLED=1 GOARCH=${{ matrix.arch }} \
           NETBIRD_STORE_ENGINE=${{ matrix.store }} \
             CI=true \
-          go test -tags=devcert \
+          go test -tags=devcert -coverprofile=coverage.txt \
             -exec "sudo --preserve-env=CI,NETBIRD_STORE_ENGINE" \
             -timeout 20m ./management/... ./shared/management/...
 
+      - name: Upload coverage reports to Codecov
+        if: matrix.arch == 'amd64'
+        uses: codecov/codecov-action@e79a6962e0d4c0c17b229090214935d2e33f8354 #v6.0.1
+        with:
+          token: ${{ secrets.CODECOV_TOKEN }}
+          slug: netbirdio/netbird
+          flags: unit,management
+
   benchmark:
     name: "Management / Benchmark"
     needs: [build-cache]
@@ -695,6 +728,14 @@ jobs:
           CGO_ENABLED=1 GOARCH=${{ matrix.arch }} \
           NETBIRD_STORE_ENGINE=${{ matrix.store }} \
           CI=true \
-          go test -tags=integration \
+          go test -tags=integration -coverprofile=coverage.txt \
           -exec 'sudo --preserve-env=CI,NETBIRD_STORE_ENGINE' \
           -timeout 20m ./management/server/http/...
+
+      - name: Upload coverage reports to Codecov
+        if: matrix.arch == 'amd64'
+        uses: codecov/codecov-action@e79a6962e0d4c0c17b229090214935d2e33f8354 #v6.0.1
+        with:
+          token: ${{ secrets.CODECOV_TOKEN }}
+          slug: netbirdio/netbird
+          flags: integration,management

.github/workflows/golang-test-windows.yml

@@ -65,15 +65,8 @@ jobs:
       - run: PsExec64 -s -w ${{ github.workspace }} C:\hostedtoolcache\windows\go\${{ steps.go.outputs.go-version }}\x64\bin\go.exe env -w GOCACHE=${{ env.modcache }}
       - run: PsExec64 -s -w ${{ github.workspace }} C:\hostedtoolcache\windows\go\${{ steps.go.outputs.go-version }}\x64\bin\go.exe mod tidy
       - name: Generate test script
-        # Exclude client/ui: its main.go uses //go:embed all:frontend/dist,
-        # which fails to compile until the frontend has been built. The Wails UI
-        # has no Go-side unit tests, and its release pipeline runs `pnpm build`
-        # before goreleaser.
-        # `go list -e` lets the listing succeed even though the embed fails to
-        # resolve; the Where-Object pipeline then drops the broken package by
-        # path. Without -e, go list aborts with empty stdout.
         run: |
-          $packages = go list -e ./... | Where-Object { $_ -notmatch '/management' } | Where-Object { $_ -notmatch '/relay' } | Where-Object { $_ -notmatch '/signal' } | Where-Object { $_ -notmatch '/proxy' } | Where-Object { $_ -notmatch '/combined' } | Where-Object { $_ -notmatch '/client/ui' }
+          $packages = go list ./... | Where-Object { $_ -notmatch '/management' } | Where-Object { $_ -notmatch '/relay' } | Where-Object { $_ -notmatch '/signal' } | Where-Object { $_ -notmatch '/proxy' } | Where-Object { $_ -notmatch '/combined' }
           $goExe = "C:\hostedtoolcache\windows\go\${{ steps.go.outputs.go-version }}\x64\bin\go.exe"
           $cmd = "$goExe test -tags=devcert -timeout 10m -p 1 $($packages -join ' ') > test-out.txt 2>&1"
           Set-Content -Path "${{ github.workspace }}\run-tests.cmd" -Value $cmd

.github/workflows/golangci-lint.yml

@@ -22,11 +22,7 @@ jobs:
         uses: codespell-project/actions-codespell@8f01853be192eb0f849a5c7d721450e7a467c579 # v2.2
         with:
           ignore_words_list: erro,clienta,hastable,iif,groupd,testin,groupe,cros,ans,deriver,te,userA,ede,additionals
-          # Non-English UI translations trip codespell on real foreign words
-          # (de: "Sie", "oder", "ist"). Only en/common.json is the source of
-          # truth that should be spell-checked. Add each new locale dir here
-          # when a language is added under client/ui/i18n/locales/.
-          skip: go.mod,go.sum,**/proxy/web/**,**/pnpm-lock.yaml,**/package-lock.json,client/ui/i18n/locales/de/**,client/ui/i18n/locales/hu/**
+          skip: go.mod,go.sum,**/proxy/web/**
   golangci:
     strategy:
       fail-fast: false
@@ -58,16 +54,7 @@ jobs:
           cache: false
       - name: Install dependencies
         if: matrix.os == 'ubuntu-latest'
-        run: sudo apt update && sudo apt install -y -q libgtk-4-dev libwebkitgtk-6.0-dev libsoup-3.0-dev libayatana-appindicator3-dev libgl1-mesa-dev xorg-dev libpcap-dev
-      - name: Stub Wails frontend bundle
-        # client/ui/main.go has //go:embed all:frontend/dist. The
-        # directory is produced by `pnpm run build` and is gitignored, so
-        # lint-only runs (no frontend toolchain) need a placeholder file
-        # for the embed pattern to match.
-        shell: bash
-        run: |
-          mkdir -p client/ui/frontend/dist
-          touch client/ui/frontend/dist/.embed-placeholder
+        run: sudo apt update && sudo apt install -y -q libgtk-3-dev libayatana-appindicator3-dev libgl1-mesa-dev xorg-dev libpcap-dev
       - name: golangci-lint
         uses: golangci/golangci-lint-action@82606bf257cbaff209d206a39f5134f0cfbfd2ee #v9.2.1
         with:

.github/workflows/proto-version-check.yml

@@ -20,15 +20,30 @@ jobs:
               per_page: 100,
             });
 
-            const modifiedPbFiles = files.filter(
-              f => f.filename.endsWith('.pb.go') && f.status === 'modified'
-            );
-            if (modifiedPbFiles.length === 0) {
-              console.log('No modified .pb.go files to check');
+            // Cover renamed .pb.go files in addition to plain edits.
+            // Renamed entries land under the new path with previous_filename
+            // pointing at the base-side name, so we read the base content
+            // from the old path when present.
+            const changedPbFiles = files
+              .filter(f => (f.status === 'modified' || f.status === 'renamed')
+                && f.filename.endsWith('.pb.go'))
+              .map(f => ({
+                headPath: f.filename,
+                basePath: f.previous_filename || f.filename,
+              }));
+            if (changedPbFiles.length === 0) {
+              console.log('No modified or renamed .pb.go files to check');
               return;
             }
 
-            const versionPattern = /^\s*\/\/\s+protoc(?:-gen-go)?\s+v[\d.]+/;
+            // Matches the generator version headers protoc writes at the top
+            // of generated files:
+            //   //   protoc           v3.21.12
+            //   //   protoc-gen-go    v1.26.0
+            //   // - protoc-gen-go-grpc v1.6.1   (grpc files prefix with "- ")
+            // The optional "- " prefix and the optional -gen-go / -gen-go-grpc
+            // suffixes keep the *_grpc.pb.go headers in scope.
+            const versionPattern = /^\s*\/\/\s+(?:-\s+)?protoc(?:-gen-go(?:-grpc)?)?\s+v[\d.]+/;
             const baseSha = context.payload.pull_request.base.sha;
             const headSha = context.payload.pull_request.head.sha;
 
@@ -55,20 +70,22 @@ jobs:
             }
 
             const violations = [];
-            for (const file of modifiedPbFiles) {
+            for (const file of changedPbFiles) {
               const [base, head] = await Promise.all([
-                getVersionHeader(file.filename, baseSha),
-                getVersionHeader(file.filename, headSha),
+                getVersionHeader(file.basePath, baseSha),
+                getVersionHeader(file.headPath, headSha),
               ]);
               if (!base.ok || !head.ok) {
                 core.warning(
-                  `Skipping ${file.filename}: base=${base.ok ? 'ok' : base.reason}, head=${head.ok ? 'ok' : head.reason}`
+                  `Skipping ${file.headPath}: base=${base.ok ? 'ok' : base.reason}, head=${head.ok ? 'ok' : head.reason}`
                 );
                 continue;
               }
               if (base.lines.join('\n') !== head.lines.join('\n')) {
                 violations.push({
-                  file: file.filename,
+                  file: file.basePath === file.headPath
+                    ? file.headPath
+                    : `${file.basePath} → ${file.headPath}`,
                   base: base.lines,
                   head: head.lines,
                 });

.github/workflows/release.yml

@@ -9,10 +9,13 @@ on:
   pull_request:
 
 env:
-  SIGN_PIPE_VER: "v0.1.5"
-  GORELEASER_VER: "v2.14.3"
+  SIGN_PIPE_VER: "v0.1.6"
+  GORELEASER_VER: "v2.16.0"
   PRODUCT_NAME: "NetBird"
   COPYRIGHT: "NetBird GmbH"
+  flags: ""
+  SKIP_PUBLISH: "true"
+  SKIP_DOCKER_PUSH: "false"
 
 concurrency:
   group: ${{ github.workflow }}-${{ github.ref }}-${{ github.head_ref || github.actor_id }}
@@ -29,10 +32,10 @@ jobs:
           persist-credentials: false
 
       - name: Generate FreeBSD port diff
-        run: bash release_files/freebsd-port-diff.sh
+        run: bash -x release_files/freebsd-port-diff.sh
 
       - name: Generate FreeBSD port issue body
-        run: bash release_files/freebsd-port-issue-body.sh
+        run: bash -x release_files/freebsd-port-issue-body.sh
 
       - name: Check if diff was generated
         id: check_diff
@@ -130,8 +133,6 @@ jobs:
       windows_packages_artifact_url: ${{ steps.upload_windows_packages.outputs.artifact-url }}
       macos_packages_artifact_url: ${{ steps.upload_macos_packages.outputs.artifact-url }}
       ghcr_images: ${{ steps.tag_and_push_images.outputs.images_markdown }}
-    env:
-      flags: ""
     steps:
       - name: Checkout
         uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
@@ -143,8 +144,27 @@ jobs:
         id: semver_parser
         uses: netbirdio/shared-actions/actions/parse-semver@be5df6047383da2236e02243cceb857d8567c27e # v0.0.2
 
-      - if: ${{ !startsWith(github.ref, 'refs/tags/v') }}
-        run: echo "flags=--snapshot" >> $GITHUB_ENV
+      - name: Set snapshot flag
+        if: ${{ !startsWith(github.ref, 'refs/tags/v') }}
+        run: | 
+          echo "flags=--snapshot" >> $GITHUB_ENV
+
+      - name: Set build vars
+        if: ${{ startsWith(github.ref, 'refs/tags/v') }}
+        run: |
+          if [[ "x-${{ steps.semver_parser.outputs.prerelease }}" == "x-" && "x-${{ github.repository }}" == "x-netbirdio/netbird" ]]; then
+            echo "x-${{ github.repository }}" 
+            echo "x-${{ steps.semver_parser.outputs.prerelease }}"
+            echo "SKIP_PUBLISH=false" >> $GITHUB_ENV
+          else
+            echo "x-${{ github.repository }}" 
+            echo "x-${{ steps.semver_parser.outputs.prerelease }}"
+          fi
+          
+          if [[ "x-${{ github.repository }}" != "x-netbirdio/netbird" ]]; then
+            echo "SKIP_DOCKER_PUSH=true" >> $GITHUB_ENV
+          fi
+
       - name: Set up Go
         uses: actions/setup-go@4b73464bb391d4059bd26b0524d20df3927bd417 # v6.3.0
         with:
@@ -161,6 +181,8 @@ jobs:
             ${{ runner.os }}-go-releaser-
       - name: Install modules
         run: go mod tidy
+      - name: run openapi generator
+        run: bash shared/management/http/api/generate.sh
       - name: check git status
         run: git --no-pager diff --exit-code
       - name: Set up QEMU
@@ -194,9 +216,9 @@ jobs:
       - name: Install goversioninfo
         run: go install github.com/josephspurrier/goversioninfo/cmd/goversioninfo@233067e
       - name: Generate windows syso amd64
-        run: goversioninfo  -icon client/ui/build/windows/icon.ico -manifest client/manifest.xml -product-name ${{ env.PRODUCT_NAME }} -copyright "${{ env.COPYRIGHT }}" -ver-major ${{ steps.semver_parser.outputs.major }} -ver-minor ${{ steps.semver_parser.outputs.minor }} -ver-patch ${{ steps.semver_parser.outputs.patch }} -ver-build 0 -file-version ${{ steps.semver_parser.outputs.fullversion }}.0 -product-version ${{ steps.semver_parser.outputs.fullversion }}.0 -o client/resources_windows_amd64.syso
+        run: goversioninfo  -icon client/ui/assets/netbird.ico -manifest client/manifest.xml -product-name ${{ env.PRODUCT_NAME }} -copyright "${{ env.COPYRIGHT }}" -ver-major ${{ steps.semver_parser.outputs.major }} -ver-minor ${{ steps.semver_parser.outputs.minor }} -ver-patch ${{ steps.semver_parser.outputs.patch }} -ver-build 0 -file-version ${{ steps.semver_parser.outputs.fullversion }}.0 -product-version ${{ steps.semver_parser.outputs.fullversion }}.0 -o client/resources_windows_amd64.syso
       - name: Generate windows syso arm64
-        run: goversioninfo -arm -64 -icon client/ui/build/windows/icon.ico -manifest client/manifest.xml -product-name ${{ env.PRODUCT_NAME }} -copyright "${{ env.COPYRIGHT }}" -ver-major ${{ steps.semver_parser.outputs.major }} -ver-minor ${{ steps.semver_parser.outputs.minor }} -ver-patch ${{ steps.semver_parser.outputs.patch }} -ver-build 0 -file-version ${{ steps.semver_parser.outputs.fullversion }}.0 -product-version ${{ steps.semver_parser.outputs.fullversion }}.0 -o client/resources_windows_arm64.syso
+        run: goversioninfo -arm -64 -icon client/ui/assets/netbird.ico -manifest client/manifest.xml -product-name ${{ env.PRODUCT_NAME }} -copyright "${{ env.COPYRIGHT }}" -ver-major ${{ steps.semver_parser.outputs.major }} -ver-minor ${{ steps.semver_parser.outputs.minor }} -ver-patch ${{ steps.semver_parser.outputs.patch }} -ver-build 0 -file-version ${{ steps.semver_parser.outputs.fullversion }}.0 -product-version ${{ steps.semver_parser.outputs.fullversion }}.0 -o client/resources_windows_arm64.syso
       - name: Run GoReleaser
         id: goreleaser
         uses: goreleaser/goreleaser-action@4c6ab561adb47e50c45ef534e2155934e91c40c1 # v7.2.0
@@ -210,6 +232,8 @@ jobs:
           UPLOAD_YUM_SECRET: ${{ secrets.PKG_UPLOAD_SECRET }}
           GPG_RPM_KEY_FILE: ${{ env.GPG_RPM_KEY_FILE }}
           NFPM_NETBIRD_RPM_PASSPHRASE: ${{ secrets.GPG_RPM_PASSPHRASE }}
+          SKIP_PUBLISH: ${{ env.SKIP_PUBLISH }}
+          SKIP_DOCKER_PUSH: ${{ env.SKIP_DOCKER_PUSH }}
       - name: Verify RPM signatures
         run: |
           docker run --rm -v $(pwd)/dist:/dist fedora:41 bash -c '
@@ -332,8 +356,22 @@ jobs:
         id: semver_parser
         uses: netbirdio/shared-actions/actions/parse-semver@be5df6047383da2236e02243cceb857d8567c27e # v0.0.2
 
-      - if: ${{ !startsWith(github.ref, 'refs/tags/v') }}
-        run: echo "flags=--snapshot" >> $GITHUB_ENV
+      - name: Set snapshot flag
+        if: ${{ !startsWith(github.ref, 'refs/tags/v') }}
+        run: |
+          echo "flags=--snapshot" >> $GITHUB_ENV
+
+      - name: Set build vars
+        if: ${{ startsWith(github.ref, 'refs/tags/v') }}
+        run: |
+          if [[ "x-${{ steps.semver_parser.outputs.prerelease }}" == "x-" && "x-${{ github.repository }}" == "x-netbirdio/netbird" ]]; then
+            echo "x-${{ github.repository }}" 
+            echo "x-${{ steps.semver_parser.outputs.prerelease }}"
+            echo "SKIP_PUBLISH=false" >> $GITHUB_ENV
+          else
+            echo "x-${{ github.repository }}" 
+            echo "x-${{ steps.semver_parser.outputs.prerelease }}"
+          fi
 
       - name: Set up Go
         uses: actions/setup-go@4b73464bb391d4059bd26b0524d20df3927bd417 # v6.3.0
@@ -356,18 +394,8 @@ jobs:
       - name: check git status
         run: git --no-pager diff --exit-code
 
-      - name: Set up Node.js
-        uses: actions/setup-node@v4
-        with:
-          node-version: '22'
-
-      - name: Set up pnpm
-        uses: pnpm/action-setup@v3
-        with:
-          version: 11
-
       - name: Install dependencies
-        run: sudo apt update && sudo apt install -y -q libgtk-4-dev libwebkitgtk-6.0-dev libsoup-3.0-dev libayatana-appindicator3-dev gcc-mingw-w64-x86-64
+        run: sudo apt update && sudo apt install -y -q libappindicator3-dev gir1.2-appindicator3-0.1 libxxf86vm-dev gcc-mingw-w64-x86-64
 
       - name: Decode GPG signing key
         if: github.event_name != 'pull_request' || github.event.pull_request.head.repo.full_name == github.repository
@@ -386,16 +414,10 @@ jobs:
           echo "/tmp/llvm-mingw-20250709-ucrt-ubuntu-22.04-x86_64/bin" >> $GITHUB_PATH
       - name: Install goversioninfo
         run: go install github.com/josephspurrier/goversioninfo/cmd/goversioninfo@233067e
-      - name: Install wails3 CLI
-        # Version derived from go.mod so the binding generator always matches
-        # the wails runtime the binary links against.
-        run: |
-          WAILS_VERSION=$(go list -m -f '{{.Version}}' github.com/wailsapp/wails/v3)
-          go install github.com/wailsapp/wails/v3/cmd/wails3@$WAILS_VERSION
       - name: Generate windows syso amd64
-        run: goversioninfo -64 -icon client/ui/build/windows/icon.ico -manifest client/ui/build/windows/wails.exe.manifest -product-name ${{ env.PRODUCT_NAME }}-"UI" -copyright "${{ env.COPYRIGHT }}" -ver-major ${{ steps.semver_parser.outputs.major }} -ver-minor ${{ steps.semver_parser.outputs.minor }} -ver-patch ${{ steps.semver_parser.outputs.patch }} -ver-build 0 -file-version ${{ steps.semver_parser.outputs.fullversion }}.0 -product-version ${{ steps.semver_parser.outputs.fullversion }}.0 -o client/ui/resources_windows_amd64.syso
+        run: goversioninfo -64 -icon client/ui/assets/netbird.ico -manifest client/ui/manifest.xml -product-name ${{ env.PRODUCT_NAME }}-"UI" -copyright "${{ env.COPYRIGHT }}" -ver-major ${{ steps.semver_parser.outputs.major }} -ver-minor ${{ steps.semver_parser.outputs.minor }} -ver-patch ${{ steps.semver_parser.outputs.patch }} -ver-build 0 -file-version ${{ steps.semver_parser.outputs.fullversion }}.0 -product-version ${{ steps.semver_parser.outputs.fullversion }}.0 -o client/ui/resources_windows_amd64.syso
       - name: Generate windows syso arm64
-        run: goversioninfo -arm -64 -icon client/ui/build/windows/icon.ico -manifest client/ui/build/windows/wails.exe.manifest -product-name ${{ env.PRODUCT_NAME }}-"UI" -copyright "${{ env.COPYRIGHT }}" -ver-major ${{ steps.semver_parser.outputs.major }} -ver-minor ${{ steps.semver_parser.outputs.minor }} -ver-patch ${{ steps.semver_parser.outputs.patch }} -ver-build 0 -file-version ${{ steps.semver_parser.outputs.fullversion }}.0 -product-version ${{ steps.semver_parser.outputs.fullversion }}.0 -o client/ui/resources_windows_arm64.syso
+        run: goversioninfo -arm -64 -icon client/ui/assets/netbird.ico -manifest client/ui/manifest.xml -product-name ${{ env.PRODUCT_NAME }}-"UI" -copyright "${{ env.COPYRIGHT }}" -ver-major ${{ steps.semver_parser.outputs.major }} -ver-minor ${{ steps.semver_parser.outputs.minor }} -ver-patch ${{ steps.semver_parser.outputs.patch }} -ver-build 0 -file-version ${{ steps.semver_parser.outputs.fullversion }}.0 -product-version ${{ steps.semver_parser.outputs.fullversion }}.0 -o client/ui/resources_windows_arm64.syso
 
       - name: Run GoReleaser
         uses: goreleaser/goreleaser-action@4c6ab561adb47e50c45ef534e2155934e91c40c1 # v7.2.0
@@ -409,6 +431,7 @@ jobs:
           UPLOAD_YUM_SECRET: ${{ secrets.PKG_UPLOAD_SECRET }}
           GPG_RPM_KEY_FILE: ${{ env.GPG_RPM_KEY_FILE }}
           NFPM_NETBIRD_UI_RPM_PASSPHRASE: ${{ secrets.GPG_RPM_PASSPHRASE }}
+          SKIP_PUBLISH: ${{ env.SKIP_PUBLISH }}
       - name: Verify RPM signatures
         run: |
           docker run --rm -v $(pwd)/dist:/dist fedora:41 bash -c '
@@ -463,20 +486,6 @@ jobs:
         run: go mod tidy
       - name: check git status
         run: git --no-pager diff --exit-code
-      - name: Set up Node.js
-        uses: actions/setup-node@v4
-        with:
-          node-version: '22'
-      - name: Set up pnpm
-        uses: pnpm/action-setup@v3
-        with:
-          version: 11
-      - name: Install wails3 CLI
-        # Version derived from go.mod so the binding generator always matches
-        # the wails runtime the binary links against.
-        run: |
-          WAILS_VERSION=$(go list -m -f '{{.Version}}' github.com/wailsapp/wails/v3)
-          go install github.com/wailsapp/wails/v3/cmd/wails3@$WAILS_VERSION
       - name: Run GoReleaser
         id: goreleaser
         uses: goreleaser/goreleaser-action@4c6ab561adb47e50c45ef534e2155934e91c40c1 # v7.2.0
@@ -564,6 +573,23 @@ jobs:
       - name: Move wintun.dll into dist
         run: mv ${{ env.downloadPath }}\wintun\bin\${{ matrix.wintun_arch }}\wintun.dll ${{ github.workspace }}\dist\${{ env.PackageWorkdir }}\
 
+      - name: Download Mesa3D (amd64 only)
+        id: download-mesa3d
+        if: matrix.arch == 'amd64'
+        uses: netbirdio/shared-actions/actions/win-download-and-verify@be5df6047383da2236e02243cceb857d8567c27e # v0.0.2
+        with:
+          url: https://pkgs.netbird.io/mesa3d/MesaForWindows-x64-20.1.8.7z
+          destination: ${{ env.downloadPath }}\mesa3d.7z
+          sha256: 71c7cb64ec229a1d6b8d62fa08e1889ed2bd17c0eeede8689daf0f25cb31d6b9
+
+      - name: Extract Mesa3D driver (amd64 only)
+        if: matrix.arch == 'amd64'
+        run: 7z x -o"${{ env.downloadPath }}" "${{ env.downloadPath }}/mesa3d.7z"
+
+      - name: Move opengl32.dll into dist (amd64 only)
+        if: matrix.arch == 'amd64'
+        run: mv ${{ env.downloadPath }}\opengl32.dll ${{ github.workspace }}\dist\${{ env.PackageWorkdir }}\
+
       - name: Download EnVar plugin for NSIS
         uses: netbirdio/shared-actions/actions/win-download-and-verify@be5df6047383da2236e02243cceb857d8567c27e # v0.0.2
         with:
@@ -586,28 +612,6 @@ jobs:
         if: matrix.arch == 'amd64'
         run: 7z x -o"${{ github.workspace }}/NSIS_Plugins" "${{ github.workspace }}/ShellExecAsUser_amd64-Unicode.7z"
 
-      - name: Set up Go for wails3 CLI
-        uses: actions/setup-go@v5
-        with:
-          go-version-file: "go.mod"
-          cache: false
-
-      - name: Install wails3 CLI
-        # Version derived from go.mod so the bootstrapper payload always
-        # matches the wails runtime the binary links against.
-        shell: bash
-        run: |
-          WAILS_VERSION=$(go list -m -f '{{.Version}}' github.com/wailsapp/wails/v3)
-          go install github.com/wailsapp/wails/v3/cmd/wails3@$WAILS_VERSION
-
-      - name: Stage WebView2 bootstrapper for installers
-        # Both client/installer.nsis and client/netbird.wxs reference
-        # client/MicrosoftEdgeWebview2Setup.exe. wails3 writes it there.
-        # The signing pipeline (netbirdio/sign-pipelines) does the same
-        # step for release builds; this mirrors it for PR sanity testing.
-        shell: bash
-        run: wails3 generate webview2bootstrapper -dir client
-
       - name: Build NSIS installer
         shell: pwsh
         env:

.github/workflows/wasm-build-validation.yml

@@ -27,7 +27,7 @@ jobs:
         with:
           go-version-file: "go.mod"
       - name: Install dependencies
-        run: sudo apt update && sudo apt install -y -q libgtk-4-dev libwebkitgtk-6.0-dev libsoup-3.0-dev libayatana-appindicator3-dev libgl1-mesa-dev xorg-dev libpcap-dev
+        run: sudo apt update && sudo apt install -y -q libgtk-3-dev libayatana-appindicator3-dev libgl1-mesa-dev xorg-dev libpcap-dev
       - name: Install golangci-lint
         uses: golangci/golangci-lint-action@82606bf257cbaff209d206a39f5134f0cfbfd2ee #v9.2.1
         with:
@@ -65,7 +65,7 @@ jobs:
 
           echo "Size: ${SIZE} bytes (${SIZE_MB} MB)"
 
-          if [ ${SIZE} -gt 58720256 ]; then
-            echo "Wasm binary size (${SIZE_MB}MB) exceeds 56MB limit!"
+          if [ ${SIZE} -gt 62914560 ]; then
+            echo "Wasm binary size (${SIZE_MB}MB) exceeds 60MB limit!"
             exit 1
           fi

.golangci.yaml

@@ -114,16 +114,6 @@ linters:
       - linters:
           - staticcheck
         text: "QF1012"
-      # client/ui/main.go uses //go:embed all:frontend/dist; the
-      # directory is populated by `pnpm build` in the release pipeline
-      # and missing at lint time, so the embed parses to "no matching
-      # files found" — surfaced by golangci-lint's typecheck pre-pass.
-      # Suppress just that one diagnostic; the rest of the package
-      # (services/, tray.go, grpc.go, ...) still gets linted normally.
-      - linters:
-          - typecheck
-        path: client/ui/main\.go
-        text: "pattern all:frontend/dist"
     paths:
       - third_party$
       - builtin$

.goreleaser.yaml

@@ -1,5 +1,7 @@
 version: 2
-
+env:
+  - SKIP_PUBLISH={{ if index .Env "SKIP_PUBLISH" }}{{ .Env.SKIP_PUBLISH }}{{ else }}true{{ end }}
+  - SKIP_DOCKER_PUSH={{ if index .Env "SKIP_DOCKER_PUSH" }}{{ .Env.SKIP_DOCKER_PUSH }}{{ else }}false{{ end }}
 project_name: netbird
 builds:
   - id: netbird-wasm
@@ -74,6 +76,8 @@ builds:
       - amd64
       - arm64
       - arm
+    goarm:
+      - 7
     ldflags:
       - -s -w -X github.com/netbirdio/netbird/version.version={{.Version}} -X main.commit={{.Commit}} -X main.date={{.CommitDate}} -X main.builtBy=goreleaser
     mod_timestamp: "{{ .CommitTimestamp }}"
@@ -88,6 +92,8 @@ builds:
       - amd64
       - arm64
       - arm
+    goarm:
+      - 7
     ldflags:
       - -s -w -X github.com/netbirdio/netbird/version.version={{.Version}} -X main.commit={{.Commit}} -X main.date={{.CommitDate}} -X main.builtBy=goreleaser
     mod_timestamp: "{{ .CommitTimestamp }}"
@@ -102,6 +108,8 @@ builds:
       - amd64
       - arm64
       - arm
+    goarm:
+      - 7
     ldflags:
       - -s -w -X github.com/netbirdio/netbird/version.version={{.Version}} -X main.commit={{.Commit}} -X main.date={{.CommitDate}} -X main.builtBy=goreleaser
     mod_timestamp: "{{ .CommitTimestamp }}"
@@ -122,6 +130,8 @@ builds:
       - amd64
       - arm64
       - arm
+    goarm:
+      - 7
     ldflags:
       - -s -w -X github.com/netbirdio/netbird/version.version={{.Version}} -X main.commit={{.Commit}} -X main.date={{.CommitDate}} -X main.builtBy=goreleaser
     mod_timestamp: "{{ .CommitTimestamp }}"
@@ -136,6 +146,8 @@ builds:
       - amd64
       - arm64
       - arm
+    goarm:
+      - 7
     ldflags:
       - -s -w -X github.com/netbirdio/netbird/version.version={{.Version}} -X main.commit={{.Commit}} -X main.date={{.CommitDate}} -X main.builtBy=goreleaser
     mod_timestamp: "{{ .CommitTimestamp }}"
@@ -150,6 +162,8 @@ builds:
       - amd64
       - arm64
       - arm
+    goarm:
+      - 7
     ldflags:
       - -s -w -X main.Version={{.Version}} -X main.Commit={{.Commit}} -X main.BuildDate={{.CommitDate}}
     mod_timestamp: "{{ .CommitTimestamp }}"
@@ -170,6 +184,8 @@ builds:
       - amd64
       - arm64
       - arm
+    goarm:
+      - 7
     ldflags:
       - -s -w -X github.com/netbirdio/netbird/version.version={{.Version}} -X main.commit={{.Commit}} -X main.date={{.CommitDate}} -X main.builtBy=goreleaser
     mod_timestamp: "{{ .CommitTimestamp }}"
@@ -222,670 +238,192 @@ nfpms:
     rpm:
       signature:
         key_file: '{{ if index .Env "GPG_RPM_KEY_FILE" }}{{ .Env.GPG_RPM_KEY_FILE }}{{ end }}'
-dockers:
-  - image_templates:
-      - netbirdio/netbird:{{ .Version }}-amd64
-      - ghcr.io/netbirdio/netbird:{{ .Version }}-amd64
-    ids:
-      - netbird
-    goarch: amd64
-    use: buildx
-    dockerfile: client/Dockerfile
-    extra_files:
-      - client/netbird-entrypoint.sh
-    build_flag_templates:
-      - "--platform=linux/amd64"
-      - "--label=org.opencontainers.image.created={{.Date}}"
-      - "--label=org.opencontainers.image.title={{.ProjectName}}"
-      - "--label=org.opencontainers.image.version={{.Version}}"
-      - "--label=org.opencontainers.image.revision={{.FullCommit}}"
-      - "--label=org.opencontainers.image.source=https://github.com/netbirdio/{{.ProjectName}}"
-      - "--label=maintainer=dev@netbird.io"
-  - image_templates:
-      - netbirdio/netbird:{{ .Version }}-arm64v8
-      - ghcr.io/netbirdio/netbird:{{ .Version }}-arm64v8
-    ids:
-      - netbird
-    goarch: arm64
-    use: buildx
-    dockerfile: client/Dockerfile
-    extra_files:
-      - client/netbird-entrypoint.sh
-    build_flag_templates:
-      - "--platform=linux/arm64"
-      - "--label=org.opencontainers.image.created={{.Date}}"
-      - "--label=org.opencontainers.image.title={{.ProjectName}}"
-      - "--label=org.opencontainers.image.version={{.Version}}"
-      - "--label=org.opencontainers.image.revision={{.FullCommit}}"
-      - "--label=org.opencontainers.image.source=https://github.com/netbirdio/{{.ProjectName}}"
-      - "--label=maintainer=dev@netbird.io"
-  - image_templates:
-      - netbirdio/netbird:{{ .Version }}-arm
-      - ghcr.io/netbirdio/netbird:{{ .Version }}-arm
-    ids:
-      - netbird
-    goarch: arm
-    goarm: 6
-    use: buildx
-    dockerfile: client/Dockerfile
-    extra_files:
-      - client/netbird-entrypoint.sh
-    build_flag_templates:
-      - "--platform=linux/arm"
-      - "--label=org.opencontainers.image.created={{.Date}}"
-      - "--label=org.opencontainers.image.title={{.ProjectName}}"
-      - "--label=org.opencontainers.image.version={{.Version}}"
-      - "--label=org.opencontainers.image.revision={{.FullCommit}}"
-      - "--label=org.opencontainers.image.source=https://github.com/netbirdio/{{.ProjectName}}"
-      - "--label=maintainer=dev@netbird.io"
-
-  - image_templates:
-      - netbirdio/netbird:{{ .Version }}-rootless-amd64
-      - ghcr.io/netbirdio/netbird:{{ .Version }}-rootless-amd64
-    ids:
-      - netbird
-    goarch: amd64
-    use: buildx
-    dockerfile: client/Dockerfile-rootless
-    extra_files:
-      - client/netbird-entrypoint.sh
-    build_flag_templates:
-      - "--platform=linux/amd64"
-      - "--label=org.opencontainers.image.created={{.Date}}"
-      - "--label=org.opencontainers.image.title={{.ProjectName}}"
-      - "--label=org.opencontainers.image.version={{.Version}}"
-      - "--label=org.opencontainers.image.revision={{.FullCommit}}"
-      - "--label=org.opencontainers.image.source=https://github.com/netbirdio/{{.ProjectName}}"
-      - "--label=maintainer=dev@netbird.io"
-  - image_templates:
-      - netbirdio/netbird:{{ .Version }}-rootless-arm64v8
-      - ghcr.io/netbirdio/netbird:{{ .Version }}-rootless-arm64v8
-    ids:
-      - netbird
-    goarch: arm64
-    use: buildx
-    dockerfile: client/Dockerfile-rootless
-    extra_files:
-      - client/netbird-entrypoint.sh
-    build_flag_templates:
-      - "--platform=linux/arm64"
-      - "--label=org.opencontainers.image.created={{.Date}}"
-      - "--label=org.opencontainers.image.title={{.ProjectName}}"
-      - "--label=org.opencontainers.image.version={{.Version}}"
-      - "--label=org.opencontainers.image.revision={{.FullCommit}}"
-      - "--label=org.opencontainers.image.source=https://github.com/netbirdio/{{.ProjectName}}"
-      - "--label=maintainer=dev@netbird.io"
-  - image_templates:
-      - netbirdio/netbird:{{ .Version }}-rootless-arm
-      - ghcr.io/netbirdio/netbird:{{ .Version }}-rootless-arm
-    ids:
-      - netbird
-    goarch: arm
-    goarm: 6
-    use: buildx
-    dockerfile: client/Dockerfile-rootless
-    extra_files:
-      - client/netbird-entrypoint.sh
-    build_flag_templates:
-      - "--platform=linux/arm"
-      - "--label=org.opencontainers.image.created={{.Date}}"
-      - "--label=org.opencontainers.image.title={{.ProjectName}}"
-      - "--label=org.opencontainers.image.version={{.Version}}"
-      - "--label=org.opencontainers.image.revision={{.FullCommit}}"
-      - "--label=org.opencontainers.image.source=https://github.com/netbirdio/{{.ProjectName}}"
-      - "--label=maintainer=dev@netbird.io"
-
-  - image_templates:
-      - netbirdio/relay:{{ .Version }}-amd64
-      - ghcr.io/netbirdio/relay:{{ .Version }}-amd64
-    ids:
-      - netbird-relay
-    goarch: amd64
-    use: buildx
-    dockerfile: relay/Dockerfile
-    build_flag_templates:
-      - "--platform=linux/amd64"
-      - "--label=org.opencontainers.image.created={{.Date}}"
-      - "--label=org.opencontainers.image.title={{.ProjectName}}"
-      - "--label=org.opencontainers.image.version={{.Version}}"
-      - "--label=org.opencontainers.image.revision={{.FullCommit}}"
-      - "--label=org.opencontainers.image.source=https://github.com/netbirdio/{{.ProjectName}}"
-      - "--label=maintainer=dev@netbird.io"
-  - image_templates:
-      - netbirdio/relay:{{ .Version }}-arm64v8
-      - ghcr.io/netbirdio/relay:{{ .Version }}-arm64v8
-    ids:
-      - netbird-relay
-    goarch: arm64
-    use: buildx
-    dockerfile: relay/Dockerfile
-    build_flag_templates:
-      - "--platform=linux/arm64"
-      - "--label=org.opencontainers.image.created={{.Date}}"
-      - "--label=org.opencontainers.image.title={{.ProjectName}}"
-      - "--label=org.opencontainers.image.version={{.Version}}"
-      - "--label=org.opencontainers.image.revision={{.FullCommit}}"
-      - "--label=org.opencontainers.image.source=https://github.com/netbirdio/{{.ProjectName}}"
-      - "--label=maintainer=dev@netbird.io"
-  - image_templates:
-      - netbirdio/relay:{{ .Version }}-arm
-      - ghcr.io/netbirdio/relay:{{ .Version }}-arm
-    ids:
-      - netbird-relay
-    goarch: arm
-    goarm: 6
-    use: buildx
-    dockerfile: relay/Dockerfile
-    build_flag_templates:
-      - "--platform=linux/arm"
-      - "--label=org.opencontainers.image.created={{.Date}}"
-      - "--label=org.opencontainers.image.title={{.ProjectName}}"
-      - "--label=org.opencontainers.image.version={{.Version}}"
-      - "--label=org.opencontainers.image.revision={{.FullCommit}}"
-      - "--label=org.opencontainers.image.source=https://github.com/netbirdio/{{.ProjectName}}"
-      - "--label=maintainer=dev@netbird.io"
-  - image_templates:
-      - netbirdio/signal:{{ .Version }}-amd64
-      - ghcr.io/netbirdio/signal:{{ .Version }}-amd64
-    ids:
-      - netbird-signal
-    goarch: amd64
-    use: buildx
-    dockerfile: signal/Dockerfile
-    build_flag_templates:
-      - "--platform=linux/amd64"
-      - "--label=org.opencontainers.image.created={{.Date}}"
-      - "--label=org.opencontainers.image.title={{.ProjectName}}"
-      - "--label=org.opencontainers.image.version={{.Version}}"
-      - "--label=org.opencontainers.image.revision={{.FullCommit}}"
-      - "--label=org.opencontainers.image.source=https://github.com/netbirdio/{{.ProjectName}}"
-      - "--label=maintainer=dev@netbird.io"
-  - image_templates:
-      - netbirdio/signal:{{ .Version }}-arm64v8
-      - ghcr.io/netbirdio/signal:{{ .Version }}-arm64v8
-    ids:
-      - netbird-signal
-    goarch: arm64
-    use: buildx
-    dockerfile: signal/Dockerfile
-    build_flag_templates:
-      - "--platform=linux/arm64"
-      - "--label=org.opencontainers.image.created={{.Date}}"
-      - "--label=org.opencontainers.image.title={{.ProjectName}}"
-      - "--label=org.opencontainers.image.version={{.Version}}"
-      - "--label=org.opencontainers.image.revision={{.FullCommit}}"
-      - "--label=org.opencontainers.image.source=https://github.com/netbirdio/{{.ProjectName}}"
-      - "--label=maintainer=dev@netbird.io"
-  - image_templates:
-      - netbirdio/signal:{{ .Version }}-arm
-      - ghcr.io/netbirdio/signal:{{ .Version }}-arm
-    ids:
-      - netbird-signal
-    goarch: arm
-    goarm: 6
-    use: buildx
-    dockerfile: signal/Dockerfile
-    build_flag_templates:
-      - "--platform=linux/arm"
-      - "--label=org.opencontainers.image.created={{.Date}}"
-      - "--label=org.opencontainers.image.title={{.ProjectName}}"
-      - "--label=org.opencontainers.image.version={{.Version}}"
-      - "--label=org.opencontainers.image.revision={{.FullCommit}}"
-      - "--label=org.opencontainers.image.source=https://github.com/netbirdio/{{.ProjectName}}"
-      - "--label=maintainer=dev@netbird.io"
-  - image_templates:
-      - netbirdio/management:{{ .Version }}-amd64
-      - ghcr.io/netbirdio/management:{{ .Version }}-amd64
-    ids:
-      - netbird-mgmt
-    goarch: amd64
-    use: buildx
-    dockerfile: management/Dockerfile
-    build_flag_templates:
-      - "--platform=linux/amd64"
-      - "--label=org.opencontainers.image.created={{.Date}}"
-      - "--label=org.opencontainers.image.title={{.ProjectName}}"
-      - "--label=org.opencontainers.image.version={{.Version}}"
-      - "--label=org.opencontainers.image.revision={{.FullCommit}}"
-      - "--label=org.opencontainers.image.source=https://github.com/netbirdio/{{.ProjectName}}"
-      - "--label=maintainer=dev@netbird.io"
-  - image_templates:
-      - netbirdio/management:{{ .Version }}-arm64v8
-      - ghcr.io/netbirdio/management:{{ .Version }}-arm64v8
-    ids:
-      - netbird-mgmt
-    goarch: arm64
-    use: buildx
-    dockerfile: management/Dockerfile
-    build_flag_templates:
-      - "--platform=linux/arm64"
-      - "--label=org.opencontainers.image.created={{.Date}}"
-      - "--label=org.opencontainers.image.title={{.ProjectName}}"
-      - "--label=org.opencontainers.image.version={{.Version}}"
-      - "--label=org.opencontainers.image.revision={{.FullCommit}}"
-      - "--label=org.opencontainers.image.source=https://github.com/netbirdio/{{.ProjectName}}"
-      - "--label=maintainer=dev@netbird.io"
-  - image_templates:
-      - netbirdio/management:{{ .Version }}-arm
-      - ghcr.io/netbirdio/management:{{ .Version }}-arm
-    ids:
-      - netbird-mgmt
-    goarch: arm
-    goarm: 6
-    use: buildx
-    dockerfile: management/Dockerfile
-    build_flag_templates:
-      - "--platform=linux/arm"
-      - "--label=org.opencontainers.image.created={{.Date}}"
-      - "--label=org.opencontainers.image.title={{.ProjectName}}"
-      - "--label=org.opencontainers.image.version={{.Version}}"
-      - "--label=org.opencontainers.image.revision={{.FullCommit}}"
-      - "--label=org.opencontainers.image.source=https://github.com/netbirdio/{{.ProjectName}}"
-      - "--label=maintainer=dev@netbird.io"
-  - image_templates:
-      - netbirdio/management:{{ .Version }}-debug-amd64
-      - ghcr.io/netbirdio/management:{{ .Version }}-debug-amd64
-    ids:
-      - netbird-mgmt
-    goarch: amd64
-    use: buildx
-    dockerfile: management/Dockerfile.debug
-    build_flag_templates:
-      - "--platform=linux/amd64"
-      - "--label=org.opencontainers.image.created={{.Date}}"
-      - "--label=org.opencontainers.image.title={{.ProjectName}}"
-      - "--label=org.opencontainers.image.version={{.Version}}"
-      - "--label=org.opencontainers.image.revision={{.FullCommit}}"
-      - "--label=org.opencontainers.image.source=https://github.com/netbirdio/{{.ProjectName}}"
-      - "--label=maintainer=dev@netbird.io"
-  - image_templates:
-      - netbirdio/management:{{ .Version }}-debug-arm64v8
-      - ghcr.io/netbirdio/management:{{ .Version }}-debug-arm64v8
-    ids:
-      - netbird-mgmt
-    goarch: arm64
-    use: buildx
-    dockerfile: management/Dockerfile.debug
-    build_flag_templates:
-      - "--platform=linux/arm64"
-      - "--label=org.opencontainers.image.created={{.Date}}"
-      - "--label=org.opencontainers.image.title={{.ProjectName}}"
-      - "--label=org.opencontainers.image.version={{.Version}}"
-      - "--label=org.opencontainers.image.revision={{.FullCommit}}"
-      - "--label=org.opencontainers.image.source=https://github.com/netbirdio/{{.ProjectName}}"
-      - "--label=maintainer=dev@netbird.io"
-
-  - image_templates:
-      - netbirdio/management:{{ .Version }}-debug-arm
-      - ghcr.io/netbirdio/management:{{ .Version }}-debug-arm
-    ids:
-      - netbird-mgmt
-    goarch: arm
-    goarm: 6
-    use: buildx
-    dockerfile: management/Dockerfile.debug
-    build_flag_templates:
-      - "--platform=linux/arm"
-      - "--label=org.opencontainers.image.created={{.Date}}"
-      - "--label=org.opencontainers.image.title={{.ProjectName}}"
-      - "--label=org.opencontainers.image.version={{.Version}}"
-      - "--label=org.opencontainers.image.revision={{.FullCommit}}"
-      - "--label=org.opencontainers.image.source=https://github.com/netbirdio/{{.ProjectName}}"
-      - "--label=maintainer=dev@netbird.io"
-  - image_templates:
-      - netbirdio/upload:{{ .Version }}-amd64
-      - ghcr.io/netbirdio/upload:{{ .Version }}-amd64
-    ids:
-      - netbird-upload
-    goarch: amd64
-    use: buildx
-    dockerfile: upload-server/Dockerfile
-    build_flag_templates:
-      - "--platform=linux/amd64"
-      - "--label=org.opencontainers.image.created={{.Date}}"
-      - "--label=org.opencontainers.image.title={{.ProjectName}}"
-      - "--label=org.opencontainers.image.version={{.Version}}"
-      - "--label=org.opencontainers.image.revision={{.FullCommit}}"
-      - "--label=org.opencontainers.image.source=https://github.com/netbirdio/{{.ProjectName}}"
-      - "--label=maintainer=dev@netbird.io"
-  - image_templates:
-      - netbirdio/upload:{{ .Version }}-arm64v8
-      - ghcr.io/netbirdio/upload:{{ .Version }}-arm64v8
-    ids:
-      - netbird-upload
-    goarch: arm64
-    use: buildx
-    dockerfile: upload-server/Dockerfile
-    build_flag_templates:
-      - "--platform=linux/arm64"
-      - "--label=org.opencontainers.image.created={{.Date}}"
-      - "--label=org.opencontainers.image.title={{.ProjectName}}"
-      - "--label=org.opencontainers.image.version={{.Version}}"
-      - "--label=org.opencontainers.image.revision={{.FullCommit}}"
-      - "--label=org.opencontainers.image.source=https://github.com/netbirdio/{{.ProjectName}}"
-      - "--label=maintainer=dev@netbird.io"
-  - image_templates:
-      - netbirdio/upload:{{ .Version }}-arm
-      - ghcr.io/netbirdio/upload:{{ .Version }}-arm
-    ids:
-      - netbird-upload
-    goarch: arm
-    goarm: 6
-    use: buildx
-    dockerfile: upload-server/Dockerfile
-    build_flag_templates:
-      - "--platform=linux/arm"
-      - "--label=org.opencontainers.image.created={{.Date}}"
-      - "--label=org.opencontainers.image.title={{.ProjectName}}"
-      - "--label=org.opencontainers.image.version={{.Version}}"
-      - "--label=org.opencontainers.image.revision={{.FullCommit}}"
-      - "--label=org.opencontainers.image.source=https://github.com/netbirdio/{{.ProjectName}}"
-      - "--label=maintainer=dev@netbird.io"
-  - image_templates:
-      - netbirdio/netbird-server:{{ .Version }}-amd64
-      - ghcr.io/netbirdio/netbird-server:{{ .Version }}-amd64
-    ids:
-      - netbird-server
-    goarch: amd64
-    use: buildx
-    dockerfile: combined/Dockerfile
-    build_flag_templates:
-      - "--platform=linux/amd64"
-      - "--label=org.opencontainers.image.created={{.Date}}"
-      - "--label=org.opencontainers.image.title={{.ProjectName}}"
-      - "--label=org.opencontainers.image.version={{.Version}}"
-      - "--label=org.opencontainers.image.revision={{.FullCommit}}"
-      - "--label=org.opencontainers.image.source=https://github.com/netbirdio/{{.ProjectName}}"
-      - "--label=maintainer=dev@netbird.io"
-  - image_templates:
-      - netbirdio/netbird-server:{{ .Version }}-arm64v8
-      - ghcr.io/netbirdio/netbird-server:{{ .Version }}-arm64v8
-    ids:
-      - netbird-server
-    goarch: arm64
-    use: buildx
-    dockerfile: combined/Dockerfile
-    build_flag_templates:
-      - "--platform=linux/arm64"
-      - "--label=org.opencontainers.image.created={{.Date}}"
-      - "--label=org.opencontainers.image.title={{.ProjectName}}"
-      - "--label=org.opencontainers.image.version={{.Version}}"
-      - "--label=org.opencontainers.image.revision={{.FullCommit}}"
-      - "--label=org.opencontainers.image.source=https://github.com/netbirdio/{{.ProjectName}}"
-      - "--label=maintainer=dev@netbird.io"
-  - image_templates:
-      - netbirdio/netbird-server:{{ .Version }}-arm
-      - ghcr.io/netbirdio/netbird-server:{{ .Version }}-arm
-    ids:
-      - netbird-server
-    goarch: arm
-    goarm: 6
-    use: buildx
-    dockerfile: combined/Dockerfile
-    build_flag_templates:
-      - "--platform=linux/arm"
-      - "--label=org.opencontainers.image.created={{.Date}}"
-      - "--label=org.opencontainers.image.title={{.ProjectName}}"
-      - "--label=org.opencontainers.image.version={{.Version}}"
-      - "--label=org.opencontainers.image.revision={{.FullCommit}}"
-      - "--label=org.opencontainers.image.source=https://github.com/netbirdio/{{.ProjectName}}"
-      - "--label=maintainer=dev@netbird.io"
-  - image_templates:
-      - netbirdio/reverse-proxy:{{ .Version }}-amd64
-      - ghcr.io/netbirdio/reverse-proxy:{{ .Version }}-amd64
-    ids:
-      - netbird-proxy
-    goarch: amd64
-    use: buildx
-    dockerfile: proxy/Dockerfile
-    build_flag_templates:
-      - "--platform=linux/amd64"
-      - "--label=org.opencontainers.image.created={{.Date}}"
-      - "--label=org.opencontainers.image.title={{.ProjectName}}"
-      - "--label=org.opencontainers.image.version={{.Version}}"
-      - "--label=org.opencontainers.image.revision={{.FullCommit}}"
-      - "--label=org.opencontainers.image.source=https://github.com/netbirdio/{{.ProjectName}}"
-      - "--label=maintainer=dev@netbird.io"
-  - image_templates:
-      - netbirdio/reverse-proxy:{{ .Version }}-arm64v8
-      - ghcr.io/netbirdio/reverse-proxy:{{ .Version }}-arm64v8
-    ids:
-      - netbird-proxy
-    goarch: arm64
-    use: buildx
-    dockerfile: proxy/Dockerfile
-    build_flag_templates:
-      - "--platform=linux/arm64"
-      - "--label=org.opencontainers.image.created={{.Date}}"
-      - "--label=org.opencontainers.image.title={{.ProjectName}}"
-      - "--label=org.opencontainers.image.version={{.Version}}"
-      - "--label=org.opencontainers.image.revision={{.FullCommit}}"
-      - "--label=org.opencontainers.image.source=https://github.com/netbirdio/{{.ProjectName}}"
-      - "--label=maintainer=dev@netbird.io"
-  - image_templates:
-      - netbirdio/reverse-proxy:{{ .Version }}-arm
-      - ghcr.io/netbirdio/reverse-proxy:{{ .Version }}-arm
-    ids:
-      - netbird-proxy
-    goarch: arm
-    goarm: 6
-    use: buildx
-    dockerfile: proxy/Dockerfile
-    build_flag_templates:
-      - "--platform=linux/arm"
-      - "--label=org.opencontainers.image.created={{.Date}}"
-      - "--label=org.opencontainers.image.title={{.ProjectName}}"
-      - "--label=org.opencontainers.image.version={{.Version}}"
-      - "--label=org.opencontainers.image.revision={{.FullCommit}}"
-      - "--label=org.opencontainers.image.source=https://github.com/netbirdio/{{.ProjectName}}"
-      - "--label=maintainer=dev@netbird.io"
-docker_manifests:
-  - name_template: netbirdio/netbird:{{ .Version }}
-    image_templates:
-      - netbirdio/netbird:{{ .Version }}-arm64v8
-      - netbirdio/netbird:{{ .Version }}-arm
-      - netbirdio/netbird:{{ .Version }}-amd64
-
-  - name_template: netbirdio/netbird:latest
-    image_templates:
-      - netbirdio/netbird:{{ .Version }}-arm64v8
-      - netbirdio/netbird:{{ .Version }}-arm
-      - netbirdio/netbird:{{ .Version }}-amd64
-
-  - name_template: netbirdio/netbird:{{ .Version }}-rootless
-    image_templates:
-      - netbirdio/netbird:{{ .Version }}-rootless-arm64v8
-      - netbirdio/netbird:{{ .Version }}-rootless-arm
-      - netbirdio/netbird:{{ .Version }}-rootless-amd64
-
-  - name_template: netbirdio/netbird:rootless-latest
-    image_templates:
-      - netbirdio/netbird:{{ .Version }}-rootless-arm64v8
-      - netbirdio/netbird:{{ .Version }}-rootless-arm
-      - netbirdio/netbird:{{ .Version }}-rootless-amd64
-
-  - name_template: netbirdio/relay:{{ .Version }}
-    image_templates:
-      - netbirdio/relay:{{ .Version }}-arm64v8
-      - netbirdio/relay:{{ .Version }}-arm
-      - netbirdio/relay:{{ .Version }}-amd64
-
-  - name_template: netbirdio/relay:latest
-    image_templates:
-      - netbirdio/relay:{{ .Version }}-arm64v8
-      - netbirdio/relay:{{ .Version }}-arm
-      - netbirdio/relay:{{ .Version }}-amd64
-
-  - name_template: netbirdio/signal:{{ .Version }}
-    image_templates:
-      - netbirdio/signal:{{ .Version }}-arm64v8
-      - netbirdio/signal:{{ .Version }}-arm
-      - netbirdio/signal:{{ .Version }}-amd64
-
-  - name_template: netbirdio/signal:latest
-    image_templates:
-      - netbirdio/signal:{{ .Version }}-arm64v8
-      - netbirdio/signal:{{ .Version }}-arm
-      - netbirdio/signal:{{ .Version }}-amd64
-
-  - name_template: netbirdio/management:{{ .Version }}
-    image_templates:
-      - netbirdio/management:{{ .Version }}-arm64v8
-      - netbirdio/management:{{ .Version }}-arm
-      - netbirdio/management:{{ .Version }}-amd64
-
-  - name_template: netbirdio/management:latest
-    image_templates:
-      - netbirdio/management:{{ .Version }}-arm64v8
-      - netbirdio/management:{{ .Version }}-arm
-      - netbirdio/management:{{ .Version }}-amd64
-
-  - name_template: netbirdio/management:debug-latest
-    image_templates:
-      - netbirdio/management:{{ .Version }}-debug-arm64v8
-      - netbirdio/management:{{ .Version }}-debug-arm
-      - netbirdio/management:{{ .Version }}-debug-amd64
-  - name_template: netbirdio/upload:{{ .Version }}
-    image_templates:
-      - netbirdio/upload:{{ .Version }}-arm64v8
-      - netbirdio/upload:{{ .Version }}-arm
-      - netbirdio/upload:{{ .Version }}-amd64
-
-  - name_template: netbirdio/upload:latest
-    image_templates:
-      - netbirdio/upload:{{ .Version }}-arm64v8
-      - netbirdio/upload:{{ .Version }}-arm
-      - netbirdio/upload:{{ .Version }}-amd64
-
-  - name_template: netbirdio/netbird-server:{{ .Version }}
-    image_templates:
-      - netbirdio/netbird-server:{{ .Version }}-arm64v8
-      - netbirdio/netbird-server:{{ .Version }}-arm
-      - netbirdio/netbird-server:{{ .Version }}-amd64
-
-  - name_template: netbirdio/netbird-server:latest
-    image_templates:
-      - netbirdio/netbird-server:{{ .Version }}-arm64v8
-      - netbirdio/netbird-server:{{ .Version }}-arm
-      - netbirdio/netbird-server:{{ .Version }}-amd64
-
-  - name_template: ghcr.io/netbirdio/netbird:{{ .Version }}
-    image_templates:
-      - ghcr.io/netbirdio/netbird:{{ .Version }}-arm64v8
-      - ghcr.io/netbirdio/netbird:{{ .Version }}-arm
-      - ghcr.io/netbirdio/netbird:{{ .Version }}-amd64
-
-  - name_template: ghcr.io/netbirdio/netbird:latest
-    image_templates:
-      - ghcr.io/netbirdio/netbird:{{ .Version }}-arm64v8
-      - ghcr.io/netbirdio/netbird:{{ .Version }}-arm
-      - ghcr.io/netbirdio/netbird:{{ .Version }}-amd64
-
-  - name_template: ghcr.io/netbirdio/netbird:{{ .Version }}-rootless
-    image_templates:
-      - ghcr.io/netbirdio/netbird:{{ .Version }}-rootless-arm64v8
-      - ghcr.io/netbirdio/netbird:{{ .Version }}-rootless-arm
-      - ghcr.io/netbirdio/netbird:{{ .Version }}-rootless-amd64
-
-  - name_template: ghcr.io/netbirdio/netbird:rootless-latest
-    image_templates:
-      - ghcr.io/netbirdio/netbird:{{ .Version }}-rootless-arm64v8
-      - ghcr.io/netbirdio/netbird:{{ .Version }}-rootless-arm
-      - ghcr.io/netbirdio/netbird:{{ .Version }}-rootless-amd64
-
-  - name_template: ghcr.io/netbirdio/relay:{{ .Version }}
-    image_templates:
-      - ghcr.io/netbirdio/relay:{{ .Version }}-arm64v8
-      - ghcr.io/netbirdio/relay:{{ .Version }}-arm
-      - ghcr.io/netbirdio/relay:{{ .Version }}-amd64
-
-  - name_template: ghcr.io/netbirdio/relay:latest
-    image_templates:
-      - ghcr.io/netbirdio/relay:{{ .Version }}-arm64v8
-      - ghcr.io/netbirdio/relay:{{ .Version }}-arm
-      - ghcr.io/netbirdio/relay:{{ .Version }}-amd64
-
-  - name_template: ghcr.io/netbirdio/signal:{{ .Version }}
-    image_templates:
-      - ghcr.io/netbirdio/signal:{{ .Version }}-arm64v8
-      - ghcr.io/netbirdio/signal:{{ .Version }}-arm
-      - ghcr.io/netbirdio/signal:{{ .Version }}-amd64
-
-  - name_template: ghcr.io/netbirdio/signal:latest
-    image_templates:
-      - ghcr.io/netbirdio/signal:{{ .Version }}-arm64v8
-      - ghcr.io/netbirdio/signal:{{ .Version }}-arm
-      - ghcr.io/netbirdio/signal:{{ .Version }}-amd64
-
-  - name_template: ghcr.io/netbirdio/management:{{ .Version }}
-    image_templates:
-      - ghcr.io/netbirdio/management:{{ .Version }}-arm64v8
-      - ghcr.io/netbirdio/management:{{ .Version }}-arm
-      - ghcr.io/netbirdio/management:{{ .Version }}-amd64
-
-  - name_template: ghcr.io/netbirdio/management:latest
-    image_templates:
-      - ghcr.io/netbirdio/management:{{ .Version }}-arm64v8
-      - ghcr.io/netbirdio/management:{{ .Version }}-arm
-      - ghcr.io/netbirdio/management:{{ .Version }}-amd64
-
-  - name_template: ghcr.io/netbirdio/management:debug-latest
-    image_templates:
-      - ghcr.io/netbirdio/management:{{ .Version }}-debug-arm64v8
-      - ghcr.io/netbirdio/management:{{ .Version }}-debug-arm
-      - ghcr.io/netbirdio/management:{{ .Version }}-debug-amd64
-
-  - name_template: ghcr.io/netbirdio/upload:{{ .Version }}
-    image_templates:
-      - ghcr.io/netbirdio/upload:{{ .Version }}-arm64v8
-      - ghcr.io/netbirdio/upload:{{ .Version }}-arm
-      - ghcr.io/netbirdio/upload:{{ .Version }}-amd64
-
-  - name_template: ghcr.io/netbirdio/upload:latest
-    image_templates:
-      - ghcr.io/netbirdio/upload:{{ .Version }}-arm64v8
-      - ghcr.io/netbirdio/upload:{{ .Version }}-arm
-      - ghcr.io/netbirdio/upload:{{ .Version }}-amd64
-
-  - name_template: ghcr.io/netbirdio/netbird-server:{{ .Version }}
-    image_templates:
-      - ghcr.io/netbirdio/netbird-server:{{ .Version }}-arm64v8
-      - ghcr.io/netbirdio/netbird-server:{{ .Version }}-arm
-      - ghcr.io/netbirdio/netbird-server:{{ .Version }}-amd64
-
-  - name_template: ghcr.io/netbirdio/netbird-server:latest
-    image_templates:
-      - ghcr.io/netbirdio/netbird-server:{{ .Version }}-arm64v8
-      - ghcr.io/netbirdio/netbird-server:{{ .Version }}-arm
-      - ghcr.io/netbirdio/netbird-server:{{ .Version }}-amd64
-
-  - name_template: netbirdio/reverse-proxy:{{ .Version }}
-    image_templates:
-      - netbirdio/reverse-proxy:{{ .Version }}-arm64v8
-      - netbirdio/reverse-proxy:{{ .Version }}-arm
-      - netbirdio/reverse-proxy:{{ .Version }}-amd64
-
-  - name_template: netbirdio/reverse-proxy:latest
-    image_templates:
-      - netbirdio/reverse-proxy:{{ .Version }}-arm64v8
-      - netbirdio/reverse-proxy:{{ .Version }}-arm
-      - netbirdio/reverse-proxy:{{ .Version }}-amd64
-
-  - name_template: ghcr.io/netbirdio/reverse-proxy:{{ .Version }}
-    image_templates:
-      - ghcr.io/netbirdio/reverse-proxy:{{ .Version }}-arm64v8
-      - ghcr.io/netbirdio/reverse-proxy:{{ .Version }}-arm
-      - ghcr.io/netbirdio/reverse-proxy:{{ .Version }}-amd64
-
-  - name_template: ghcr.io/netbirdio/reverse-proxy:latest
-    image_templates:
-      - ghcr.io/netbirdio/reverse-proxy:{{ .Version }}-arm64v8
-      - ghcr.io/netbirdio/reverse-proxy:{{ .Version }}-arm
-      - ghcr.io/netbirdio/reverse-proxy:{{ .Version }}-amd64
+dockers_v2:
+   - id: netbird
+     disable: "{{ .Env.SKIP_DOCKER_PUSH }}"
+     ids:
+       - netbird
+     images:
+       - netbirdio/netbird
+       - ghcr.io/netbirdio/netbird
+     tags:
+       - "v{{ .Version }}"
+       - "{{ if eq .Env.SKIP_PUBLISH \"false\" }}latest{{ end }}"
+     dockerfile: client/Dockerfile
+     extra_files:
+       - client/netbird-entrypoint.sh
+     platforms:
+       - linux/amd64
+       - linux/arm64
+       - linux/arm/6
+     annotations:
+       "org.opencontainers.image.created": "{{.Date}}"
+       "org.opencontainers.image.title": "{{.ProjectName}}"
+       "org.opencontainers.image.version": "{{.Version}}"
+       "org.opencontainers.image.revision": "{{.FullCommit}}"
+       "org.opencontainers.image.source": "{{.GitURL}}"
+       "maintainer": "dev@netbird.io"
+   - id: netbird-rootless
+     disable: "{{ .Env.SKIP_DOCKER_PUSH }}"
+     ids:
+       - netbird
+     images:
+       - netbirdio/netbird
+       - ghcr.io/netbirdio/netbird
+     tags:
+       - "v{{ .Version }}-rootless"
+       - "{{ if eq .Env.SKIP_PUBLISH \"false\" }}latest{{ end }}"
+     dockerfile: client/Dockerfile-rootless
+     extra_files:
+       - client/netbird-entrypoint.sh
+     platforms:
+       - linux/amd64
+       - linux/arm64
+       - linux/arm/6
+     annotations:
+       "org.opencontainers.image.created": "{{.Date}}"
+       "org.opencontainers.image.title": "{{.ProjectName}}"
+       "org.opencontainers.image.version": "{{.Version}}"
+       "org.opencontainers.image.revision": "{{.FullCommit}}"
+       "org.opencontainers.image.source": "{{.GitURL}}"
+       "maintainer": "dev@netbird.io"
+   - id: relay
+     disable: "{{ .Env.SKIP_DOCKER_PUSH }}"
+     ids:
+       - netbird-relay
+     images:
+       - netbirdio/relay
+       - ghcr.io/netbirdio/relay
+     tags:
+       - "v{{ .Version }}"
+       - "{{ if eq .Env.SKIP_PUBLISH \"false\" }}latest{{ end }}"
+     dockerfile: relay/Dockerfile
+     platforms:
+       - linux/amd64
+       - linux/arm64
+       - linux/arm
+     annotations:
+       "org.opencontainers.image.created": "{{.Date}}"
+       "org.opencontainers.image.title": "{{.ProjectName}}"
+       "org.opencontainers.image.version": "{{.Version}}"
+       "org.opencontainers.image.revision": "{{.FullCommit}}"
+       "org.opencontainers.image.source": "{{.GitURL}}"
+       "maintainer": "dev@netbird.io"
+   - id: signal
+     disable: "{{ .Env.SKIP_DOCKER_PUSH }}"
+     ids:
+       - netbird-signal
+     images:
+       - netbirdio/signal
+       - ghcr.io/netbirdio/signal
+     tags:
+       - "v{{ .Version }}"
+       - "{{ if eq .Env.SKIP_PUBLISH \"false\" }}latest{{ end }}"
+     dockerfile: signal/Dockerfile
+     platforms:
+       - linux/amd64
+       - linux/arm64
+       - linux/arm
+     annotations:
+       "org.opencontainers.image.created": "{{.Date}}"
+       "org.opencontainers.image.title": "{{.ProjectName}}"
+       "org.opencontainers.image.version": "{{.Version}}"
+       "org.opencontainers.image.revision": "{{.FullCommit}}"
+       "org.opencontainers.image.source": "{{.GitURL}}"
+       "maintainer": "dev@netbird.io"
+   - id: management
+     disable: "{{ .Env.SKIP_DOCKER_PUSH }}"
+     ids:
+       - netbird-mgmt
+     images:
+       - netbirdio/management
+       - ghcr.io/netbirdio/management
+     tags:
+       - "v{{ .Version }}"
+       - "{{ if eq .Env.SKIP_PUBLISH \"false\" }}latest{{ end }}"
+     dockerfile: management/Dockerfile
+     platforms:
+       - linux/amd64
+       - linux/arm64
+       - linux/arm
+     annotations:
+       "org.opencontainers.image.created": "{{.Date}}"
+       "org.opencontainers.image.title": "{{.ProjectName}}"
+       "org.opencontainers.image.version": "{{.Version}}"
+       "org.opencontainers.image.revision": "{{.FullCommit}}"
+       "org.opencontainers.image.source": "{{.GitURL}}"
+       "maintainer": "dev@netbird.io"
+   - id: upload
+     disable: "{{ .Env.SKIP_DOCKER_PUSH }}"
+     ids:
+       - netbird-upload
+     images:
+       - netbirdio/upload
+       - ghcr.io/netbirdio/upload
+     tags:
+       - "v{{ .Version }}"
+       - "{{ if eq .Env.SKIP_PUBLISH \"false\" }}latest{{ end }}"
+     dockerfile: upload-server/Dockerfile
+     platforms:
+       - linux/amd64
+       - linux/arm64
+       - linux/arm
+     annotations:
+       "org.opencontainers.image.created": "{{.Date}}"
+       "org.opencontainers.image.title": "{{.ProjectName}}"
+       "org.opencontainers.image.version": "{{.Version}}"
+       "org.opencontainers.image.revision": "{{.FullCommit}}"
+       "org.opencontainers.image.source": "{{.GitURL}}"
+       "maintainer": "dev@netbird.io"
+   - id: netbird-server
+     disable: "{{ .Env.SKIP_DOCKER_PUSH }}"
+     ids:
+       - netbird-server
+     images:
+       - netbirdio/netbird-server
+       - ghcr.io/netbirdio/netbird-server
+     tags:
+       - "v{{ .Version }}"
+       - "{{ if eq .Env.SKIP_PUBLISH \"false\" }}latest{{ end }}"
+     dockerfile: combined/Dockerfile
+     platforms:
+       - linux/amd64
+       - linux/arm64
+       - linux/arm
+     annotations:
+       "org.opencontainers.image.created": "{{.Date}}"
+       "org.opencontainers.image.title": "{{.ProjectName}}"
+       "org.opencontainers.image.version": "{{.Version}}"
+       "org.opencontainers.image.revision": "{{.FullCommit}}"
+       "org.opencontainers.image.source": "{{.GitURL}}"
+       "maintainer": "dev@netbird.io"
+   - id: netbird-proxy
+     disable: "{{ .Env.SKIP_DOCKER_PUSH }}"
+     ids:
+       - netbird-proxy
+     images:
+       - netbirdio/reverse-proxy
+       - ghcr.io/netbirdio/reverse-proxy
+     tags:
+       - "v{{ .Version }}"
+       - "{{ if eq .Env.SKIP_PUBLISH \"false\" }}latest{{ end }}"
+     dockerfile: proxy/Dockerfile
+     platforms:
+       - linux/amd64
+       - linux/arm64
+       - linux/arm
+     annotations:
+       "org.opencontainers.image.created": "{{.Date}}"
+       "org.opencontainers.image.title": "{{.ProjectName}}"
+       "org.opencontainers.image.version": "{{.Version}}"
+       "org.opencontainers.image.revision": "{{.FullCommit}}"
+       "org.opencontainers.image.source": "{{.GitURL}}"
+       "maintainer": "dev@netbird.io"
 
 brews:
   - ids:
       - default
+    skip_upload: "{{ .Env.SKIP_PUBLISH }}"
     repository:
       owner: netbirdio
       name: homebrew-tap
@@ -902,6 +440,7 @@ brews:
 
 uploads:
   - name: debian
+    skip: "{{ .Env.SKIP_PUBLISH }}"
     ids:
       - netbird_deb
     mode: archive
@@ -910,6 +449,7 @@ uploads:
     method: PUT
 
   - name: yum
+    skip: "{{ .Env.SKIP_PUBLISH }}"
     ids:
       - netbird_rpm
     mode: archive

.goreleaser_ui.yaml

@@ -1,15 +1,7 @@
 version: 2
-
+env:
+  - SKIP_PUBLISH={{ if index .Env "SKIP_PUBLISH" }}{{ .Env.SKIP_PUBLISH }}{{ else }}true{{ end }}
 project_name: netbird-ui
-
-before:
-  hooks:
-    # Bindings are gitignored; regenerate before the frontend build so
-    # the @wailsio/runtime Vite plugin can resolve them (vite refuses to
-    # build without them).
-    - sh -c 'cd client/ui && wails3 generate bindings -clean=true -ts'
-    - sh -c 'cd client/ui/frontend && pnpm install --frozen-lockfile && pnpm build'
-
 builds:
   - id: netbird-ui
     dir: client/ui
@@ -79,15 +71,12 @@ nfpms:
     scripts:
       postinstall: "release_files/ui-post-install.sh"
     contents:
-      - src: client/ui/build/linux/netbird.desktop
+      - src: client/ui/build/netbird.desktop
         dst: /usr/share/applications/netbird.desktop
-      - src: client/ui/build/appicon.png
+      - src: client/ui/assets/netbird.png
         dst: /usr/share/pixmaps/netbird.png
     dependencies:
       - netbird
-      - libgtk-3-0
-      - libwebkit2gtk-4.1-0
-      - libayatana-appindicator3-1
 
   - maintainer: Netbird <dev@netbird.io>
     description: Netbird client UI.
@@ -101,21 +90,19 @@ nfpms:
     scripts:
       postinstall: "release_files/ui-post-install.sh"
     contents:
-      - src: client/ui/build/linux/netbird.desktop
+      - src: client/ui/build/netbird.desktop
         dst: /usr/share/applications/netbird.desktop
-      - src: client/ui/build/appicon.png
+      - src: client/ui/assets/netbird.png
         dst: /usr/share/pixmaps/netbird.png
     dependencies:
       - netbird
-      - gtk3
-      - webkit2gtk4.1
-      - libayatana-appindicator-gtk3
     rpm:
       signature:
         key_file: '{{ if index .Env "GPG_RPM_KEY_FILE" }}{{ .Env.GPG_RPM_KEY_FILE }}{{ end }}'
 
 uploads:
   - name: debian
+    skip: "{{ .Env.SKIP_PUBLISH }}"
     ids:
       - netbird_ui_deb
     mode: archive
@@ -124,6 +111,7 @@ uploads:
     method: PUT
 
   - name: yum
+    skip: "{{ .Env.SKIP_PUBLISH }}"
     ids:
       - netbird_ui_rpm
     mode: archive

.goreleaser_ui_darwin.yaml

@@ -1,15 +1,6 @@
 version: 2
 
 project_name: netbird-ui
-
-before:
-  hooks:
-    # Bindings are gitignored; regenerate before the frontend build so
-    # the @wailsio/runtime Vite plugin can resolve them (vite refuses to
-    # build without them).
-    - sh -c 'cd client/ui && wails3 generate bindings -clean=true -ts'
-    - sh -c 'cd client/ui/frontend && pnpm install --frozen-lockfile && pnpm build'
-
 builds:
   - id: netbird-ui-darwin
     dir: client/ui
@@ -29,6 +20,8 @@ builds:
     ldflags:
       - -s -w -X github.com/netbirdio/netbird/version.version={{.Version}} -X main.commit={{.Commit}} -X main.date={{.CommitDate}} -X main.builtBy=goreleaser
     mod_timestamp: "{{ .CommitTimestamp }}"
+    tags:
+      - load_wgnt_from_rsrc
 
 universal_binaries:
   - id: netbird-ui-darwin

client/Dockerfile

@@ -4,7 +4,7 @@
 #   sudo podman build -t localhost/netbird:latest -f client/Dockerfile --ignorefile .dockerignore-client .
 #   sudo podman run --rm -it --cap-add={BPF,NET_ADMIN,NET_RAW} localhost/netbird:latest
 
-FROM alpine:3.23.3
+FROM alpine:3.24
 # iproute2: busybox doesn't display ip rules properly
 RUN apk add --no-cache \
     bash \
@@ -21,7 +21,7 @@ ENV \
     NB_ENTRYPOINT_SERVICE_TIMEOUT="30"
 
 ENTRYPOINT [ "/usr/local/bin/netbird-entrypoint.sh" ]
-
-ARG NETBIRD_BINARY=netbird
+ARG TARGETPLATFORM
+ARG NETBIRD_BINARY=$TARGETPLATFORM/netbird
 COPY client/netbird-entrypoint.sh /usr/local/bin/netbird-entrypoint.sh
 COPY "${NETBIRD_BINARY}"  /usr/local/bin/netbird

client/Dockerfile-rootless

@@ -4,7 +4,7 @@
 #   podman build -t localhost/netbird:latest -f client/Dockerfile --ignorefile .dockerignore-client .
 #   podman run --rm -it --cap-add={BPF,NET_ADMIN,NET_RAW} localhost/netbird:latest
 
-FROM alpine:3.22.0
+FROM alpine:3.24
 
 RUN apk add --no-cache \
       bash \
@@ -27,7 +27,7 @@ ENV \
     NB_ENTRYPOINT_SERVICE_TIMEOUT="30"
 
 ENTRYPOINT [ "/usr/local/bin/netbird-entrypoint.sh" ]
-
-ARG NETBIRD_BINARY=netbird
+ARG TARGETPLATFORM
+ARG NETBIRD_BINARY=$TARGETPLATFORM/netbird
 COPY client/netbird-entrypoint.sh /usr/local/bin/netbird-entrypoint.sh
 COPY "${NETBIRD_BINARY}"  /usr/local/bin/netbird

client/android/profile_manager.go

@@ -6,7 +6,6 @@ import (
 	"fmt"
 	"os"
 	"path/filepath"
-	"strings"
 
 	log "github.com/sirupsen/logrus"
 
@@ -24,6 +23,7 @@ const (
 
 // Profile represents a profile for gomobile
 type Profile struct {
+	ID       string
 	Name     string
 	IsActive bool
 }
@@ -53,10 +53,10 @@ func (p *ProfileArray) Get(i int) *Profile {
 ├── state.json                                  ← Default profile state
 ├── active_profile.json                         ← Active profile tracker (JSON with Name + Username)
 └── profiles/                                   ← Subdirectory for non-default profiles
-    ├── work.json                              ← Work profile config
-    ├── work.state.json                        ← Work profile state
-    ├── personal.json                          ← Personal profile config
-    └── personal.state.json                    ← Personal profile state
+    ├── work.json                              			← Legacy work profile config
+    ├── work.state.json                        			← Legacy work profile state
+    ├── 4c5f5c8198c3989cffb5b5394f5a7ae0.json  			← ID profile config
+    ├── 4c5f5c8198c3989cffb5b5394f5a7ae0.state.json ← ID profile state
 */
 
 // ProfileManager manages profiles for Android
@@ -99,6 +99,7 @@ func (pm *ProfileManager) ListProfiles() (*ProfileArray, error) {
 	var profiles []*Profile
 	for _, p := range internalProfiles {
 		profiles = append(profiles, &Profile{
+			ID:       p.ID.String(),
 			Name:     p.Name,
 			IsActive: p.IsActive,
 		})
@@ -108,55 +109,65 @@ func (pm *ProfileManager) ListProfiles() (*ProfileArray, error) {
 }
 
 // GetActiveProfile returns the currently active profile name
-func (pm *ProfileManager) GetActiveProfile() (string, error) {
+func (pm *ProfileManager) GetActiveProfile() (*Profile, error) {
 	// Use ServiceManager to stay consistent with ListProfiles
 	// ServiceManager uses active_profile.json
 	activeState, err := pm.serviceMgr.GetActiveProfileState()
 	if err != nil {
-		return "", fmt.Errorf("failed to get active profile: %w", err)
+		return nil, fmt.Errorf("failed to get active profile: %w", err)
 	}
-	return activeState.Name, nil
+
+	// ActiveProfileState only stores the ID (and username), not the display
+	// name. Resolve the ID to the full profile so callers get the real Name.
+	prof, err := pm.serviceMgr.ResolveProfile(activeState.ID.String(), androidUsername)
+	if err != nil {
+		return nil, fmt.Errorf("failed to resolve active profile %q: %w", activeState.ID, err)
+	}
+	return &Profile{ID: prof.ID.String(), Name: prof.Name, IsActive: true}, nil
 }
 
 // SwitchProfile switches to a different profile
-func (pm *ProfileManager) SwitchProfile(profileName string) error {
+func (pm *ProfileManager) SwitchProfile(id string) error {
 	// Use ServiceManager to stay consistent with ListProfiles
 	// ServiceManager uses active_profile.json
 	err := pm.serviceMgr.SetActiveProfileState(&profilemanager.ActiveProfileState{
-		Name:     profileName,
+		ID:       profilemanager.ID(id),
 		Username: androidUsername,
 	})
 	if err != nil {
 		return fmt.Errorf("failed to switch profile: %w", err)
 	}
 
-	log.Infof("switched to profile: %s", profileName)
+	log.Infof("switched to profile: %s", id)
 	return nil
 }
 
 // AddProfile creates a new profile
 func (pm *ProfileManager) AddProfile(profileName string) error {
 	// Use ServiceManager (creates profile in profiles/ directory)
-	if err := pm.serviceMgr.AddProfile(profileName, androidUsername); err != nil {
+	profile, err := pm.serviceMgr.AddProfile(profileName, androidUsername)
+	if err != nil {
 		return fmt.Errorf("failed to add profile: %w", err)
 	}
 
-	log.Infof("created new profile: %s", profileName)
+	log.Infof("created new profile: %s", profile.ID)
 	return nil
 }
 
 // LogoutProfile logs out from a profile (clears authentication)
-func (pm *ProfileManager) LogoutProfile(profileName string) error {
-	profileName = sanitizeProfileName(profileName)
-
-	configPath, err := pm.getProfileConfigPath(profileName)
+func (pm *ProfileManager) LogoutProfile(id string) error {
+	configPath, err := pm.getProfileConfigPath(id)
 	if err != nil {
 		return err
 	}
 
+	if !profilemanager.IsValidProfileFilenameStem(profilemanager.ID(id)) {
+		return fmt.Errorf("id '%s' is not valid", id)
+	}
+
 	// Check if profile exists
 	if _, err := os.Stat(configPath); os.IsNotExist(err) {
-		return fmt.Errorf("profile '%s' does not exist", profileName)
+		return fmt.Errorf("profile '%s' does not exist", id)
 	}
 
 	// Read current config using internal profilemanager
@@ -174,53 +185,57 @@ func (pm *ProfileManager) LogoutProfile(profileName string) error {
 		return fmt.Errorf("failed to save config: %w", err)
 	}
 
-	log.Infof("logged out from profile: %s", profileName)
+	log.Infof("logged out from profile: %s", id)
 	return nil
 }
 
 // RemoveProfile deletes a profile
-func (pm *ProfileManager) RemoveProfile(profileName string) error {
+func (pm *ProfileManager) RemoveProfile(id string) error {
 	// Use ServiceManager (removes profile from profiles/ directory)
-	if err := pm.serviceMgr.RemoveProfile(profileName, androidUsername); err != nil {
+	if err := pm.serviceMgr.RemoveProfile(profilemanager.ID(id), androidUsername); err != nil {
 		return fmt.Errorf("failed to remove profile: %w", err)
 	}
 
-	log.Infof("removed profile: %s", profileName)
+	log.Infof("removed profile: %s", id)
 	return nil
 }
 
 // getProfileConfigPath returns the config file path for a profile
 // This is needed for Android-specific path handling (netbird.cfg for default profile)
-func (pm *ProfileManager) getProfileConfigPath(profileName string) (string, error) {
-	if profileName == "" || profileName == profilemanager.DefaultProfileName {
+func (pm *ProfileManager) getProfileConfigPath(id string) (string, error) {
+	if !profilemanager.IsValidProfileFilenameStem(profilemanager.ID(id)) {
+		return "", fmt.Errorf("id %q is not valid", id)
+	}
+
+	if id == profilemanager.DefaultProfileName {
 		// Android uses netbird.cfg for default profile instead of default.json
 		// Default profile is stored in root configDir, not in profiles/
 		return filepath.Join(pm.configDir, defaultConfigFilename), nil
 	}
 
-	// Non-default profiles are stored in profiles subdirectory
-	// This matches the Java Preferences.java expectation
-	profileName = sanitizeProfileName(profileName)
 	profilesDir := filepath.Join(pm.configDir, profilesSubdir)
-	return filepath.Join(profilesDir, profileName+".json"), nil
+	return filepath.Join(profilesDir, id+".json"), nil
 }
 
-// GetConfigPath returns the config file path for a given profile
+// GetConfigPath returns the config file path for a given profile id
 // Java should call this instead of constructing paths with Preferences.configFile()
-func (pm *ProfileManager) GetConfigPath(profileName string) (string, error) {
-	return pm.getProfileConfigPath(profileName)
+func (pm *ProfileManager) GetConfigPath(id string) (string, error) {
+	return pm.getProfileConfigPath(id)
 }
 
 // GetStateFilePath returns the state file path for a given profile
 // Java should call this instead of constructing paths with Preferences.stateFile()
-func (pm *ProfileManager) GetStateFilePath(profileName string) (string, error) {
-	if profileName == "" || profileName == profilemanager.DefaultProfileName {
+func (pm *ProfileManager) GetStateFilePath(id string) (string, error) {
+	if id == "" || id == profilemanager.DefaultProfileName {
 		return filepath.Join(pm.configDir, "state.json"), nil
 	}
 
-	profileName = sanitizeProfileName(profileName)
+	if !profilemanager.IsValidProfileFilenameStem(profilemanager.ID(id)) {
+		return "", fmt.Errorf("id %q is not valid", id)
+	}
+
 	profilesDir := filepath.Join(pm.configDir, profilesSubdir)
-	return filepath.Join(profilesDir, profileName+".state.json"), nil
+	return filepath.Join(profilesDir, id+".state.json"), nil
 }
 
 // GetActiveConfigPath returns the config file path for the currently active profile
@@ -230,7 +245,7 @@ func (pm *ProfileManager) GetActiveConfigPath() (string, error) {
 	if err != nil {
 		return "", fmt.Errorf("failed to get active profile: %w", err)
 	}
-	return pm.GetConfigPath(activeProfile)
+	return pm.GetConfigPath(activeProfile.ID)
 }
 
 // GetActiveStateFilePath returns the state file path for the currently active profile
@@ -240,18 +255,5 @@ func (pm *ProfileManager) GetActiveStateFilePath() (string, error) {
 	if err != nil {
 		return "", fmt.Errorf("failed to get active profile: %w", err)
 	}
-	return pm.GetStateFilePath(activeProfile)
-}
-
-// sanitizeProfileName removes invalid characters from profile name
-func sanitizeProfileName(name string) string {
-	// Keep only alphanumeric, underscore, and hyphen
-	var result strings.Builder
-	for _, r := range name {
-		if (r >= 'a' && r <= 'z') || (r >= 'A' && r <= 'Z') ||
-			(r >= '0' && r <= '9') || r == '_' || r == '-' {
-			result.WriteRune(r)
-		}
-	}
-	return result.String()
+	return pm.GetStateFilePath(activeProfile.ID)
 }

client/cmd/debug.go

@@ -3,12 +3,14 @@ package cmd
 import (
 	"context"
 	"fmt"
+	"os/user"
 	"strings"
 	"time"
 
 	log "github.com/sirupsen/logrus"
 	"github.com/spf13/cobra"
 	"google.golang.org/grpc/status"
+	"google.golang.org/protobuf/encoding/protojson"
 	"google.golang.org/protobuf/types/known/durationpb"
 
 	"github.com/netbirdio/netbird/client/internal"
@@ -19,6 +21,7 @@ import (
 	"github.com/netbirdio/netbird/client/server"
 	mgmProto "github.com/netbirdio/netbird/shared/management/proto"
 	"github.com/netbirdio/netbird/upload-server/types"
+	"github.com/netbirdio/netbird/version"
 )
 
 const errCloseConnection = "Failed to close connection: %v"
@@ -84,6 +87,73 @@ var persistenceCmd = &cobra.Command{
 	RunE:    setSyncResponsePersistence,
 }
 
+var debugConfigCmd = &cobra.Command{
+	Use:     "config",
+	Example: "  netbird debug config",
+	Short:   "Dump the effective configuration",
+	Long:    "Prints the daemon's resolved configuration (after applying defaults, file, env, CLI input, and MDM policy overrides) as JSON. Includes the list of MDM-managed fields.",
+	RunE:    debugConfigDump,
+}
+
+// debugConfigDump implements `netbird debug config`. It resolves the
+// active profile, queries the daemon for the effective configuration
+// via GetConfig, and prints the resulting GetConfigResponse as JSON
+// (via protojson with EmitUnpopulated=true so the output is stable
+// across runs and includes zero-valued fields).
+//
+// Useful for verifying MDM enforcement end-to-end: the response's
+// mDMManagedFields array is the single source of truth for "which
+// fields is the daemon currently enforcing from the MDM source", and
+// every config field side-by-side with that list confirms the merge
+// result. Secrets in the response (e.g. PreSharedKey) are already
+// redacted by the daemon-side handler.
+func debugConfigDump(cmd *cobra.Command, _ []string) error {
+	pm := profilemanager.NewProfileManager()
+	activeProf, err := pm.GetActiveProfile()
+	if err != nil {
+		return fmt.Errorf("get active profile: %v", err)
+	}
+	currUser, err := user.Current()
+	if err != nil {
+		return fmt.Errorf("get current user: %v", err)
+	}
+
+	conn, err := getClient(cmd)
+	if err != nil {
+		return err
+	}
+	defer func() {
+		if err := conn.Close(); err != nil {
+			log.Errorf(errCloseConnection, err)
+		}
+	}()
+
+	client := proto.NewDaemonServiceClient(conn)
+	resp, err := client.GetConfig(cmd.Context(), &proto.GetConfigRequest{
+		ProfileName: activeProf.Name,
+		Username:    currUser.Username,
+	})
+	if err != nil {
+		return fmt.Errorf("failed to get config: %v", status.Convert(err).Message())
+	}
+
+	// Use protojson so well-known fields render correctly; emit defaults so
+	// the operator sees every field even when zero/empty.
+	m := protojson.MarshalOptions{Multiline: true, Indent: "  ", EmitUnpopulated: true}
+	out, err := m.Marshal(resp)
+	if err != nil {
+		return fmt.Errorf("marshal config: %w", err)
+	}
+	cmd.Println(string(out))
+	return nil
+}
+
+// debugBundle requests the daemon to create a debug bundle and prints
+// the resulting local file path and, if uploaded, the uploaded file
+// key. It uses the package flags (anonymize, system info, log file
+// count, CLI version, optional upload URL) to configure the bundle
+// request. Returns an error if the RPC fails or if the daemon reports
+// an upload failure reason.
 func debugBundle(cmd *cobra.Command, _ []string) error {
 	conn, err := getClient(cmd)
 	if err != nil {
@@ -100,6 +170,7 @@ func debugBundle(cmd *cobra.Command, _ []string) error {
 		Anonymize:    anonymizeFlag,
 		SystemInfo:   systemInfoFlag,
 		LogFileCount: logFileCount,
+		CliVersion:   version.NetbirdVersion(),
 	}
 	if uploadBundleFlag {
 		request.UploadURL = uploadBundleURLFlag
@@ -298,6 +369,7 @@ func runForDuration(cmd *cobra.Command, args []string) error {
 		Anonymize:    anonymizeFlag,
 		SystemInfo:   systemInfoFlag,
 		LogFileCount: logFileCount,
+		CliVersion:   version.NetbirdVersion(),
 	}
 	if uploadBundleFlag {
 		request.UploadURL = uploadBundleURLFlag
@@ -432,6 +504,7 @@ func generateDebugBundle(config *profilemanager.Config, recorder *peer.Status, c
 			SyncResponse:   syncResponse,
 			LogPath:        logFilePath,
 			CPUProfile:     nil,
+			DaemonVersion:  version.NetbirdVersion(), // acting as daemon
 		},
 		debug.BundleConfig{
 			IncludeSystemInfo: true,

client/cmd/kubernetes.go

@@ -0,0 +1,301 @@
+package cmd
+
+import (
+	"context"
+	"crypto/tls"
+	"encoding/json"
+	"errors"
+	"fmt"
+	"io"
+	"net"
+	"net/http"
+	"net/url"
+	"os"
+	"path/filepath"
+	"slices"
+	"strings"
+
+	"github.com/goccy/go-yaml"
+	log "github.com/sirupsen/logrus"
+	"github.com/spf13/cobra"
+
+	"github.com/netbirdio/netbird/client/proto"
+)
+
+const (
+	KubernetesDNSSuffix = "netbird-kubeapi-proxy"
+)
+
+var kubernetesCmd = &cobra.Command{
+	Use:   "kubernetes",
+	Short: "Kubernetes cluster commands.",
+	Long:  "Kubernetes cluster commands.",
+}
+
+var kubernetesListCmd = &cobra.Command{
+	Use:   "list",
+	RunE:  kubernetesList,
+	Short: "List Kubernetes clusters.",
+	Long:  "List Kubernetes clusters by discovering NetBird peers running netbird-kubeapi-proxy.",
+}
+
+var kubernetesWriteKubeconfigCmd = &cobra.Command{
+	Use:   "write-kubeconfig",
+	RunE:  kubernetesWriteKubeconfig,
+	Args:  cobra.ExactArgs(1),
+	Short: "Write kubeconfig for a Kubernetes cluster.",
+	Long:  "Updates kubeconfig in place to allow token-less access to the Kubernetes cluster through NetBird.",
+}
+
+func init() {
+	kubernetesWriteKubeconfigCmd.Flags().String("kubeconfig", "", "path to kubeconfig file")
+}
+
+func kubernetesList(cmd *cobra.Command, _ []string) error {
+	conn, err := getClient(cmd)
+	if err != nil {
+		return err
+	}
+	defer conn.Close()
+	client := proto.NewDaemonServiceClient(conn)
+	statusResp, err := client.Status(cmd.Context(), &proto.StatusRequest{GetFullPeerStatus: true})
+	if err != nil {
+		return err
+	}
+
+	kcs, err := getKubernetesClusters(cmd.Context(), statusResp.FullStatus.Peers, "")
+	if err != nil {
+		return err
+	}
+	if len(kcs) == 0 {
+		cmd.Println("No Kubernetes clusters available.")
+		return nil
+	}
+	cmd.Println("Available Kubernetes clusters:")
+	for _, k := range kcs {
+		cmd.Printf("\n  - Name: %s\n    FQDN: %s\n    Version: %s\n", k.name, k.url.Host, k.version)
+	}
+	return nil
+}
+
+func kubernetesWriteKubeconfig(cmd *cobra.Command, args []string) error {
+	kubeconfigPath, err := resolveKubeconfigPath(cmd)
+	if err != nil {
+		return err
+	}
+
+	conn, err := getClient(cmd)
+	if err != nil {
+		return err
+	}
+	defer conn.Close()
+	client := proto.NewDaemonServiceClient(conn)
+	statusResp, err := client.Status(cmd.Context(), &proto.StatusRequest{GetFullPeerStatus: true})
+	if err != nil {
+		return err
+	}
+
+	clusterName := args[0]
+	kcs, err := getKubernetesClusters(cmd.Context(), statusResp.FullStatus.Peers, clusterName)
+	if err != nil {
+		return err
+	}
+	if len(kcs) == 0 {
+		return fmt.Errorf("kubernetes cluster named %s not found", clusterName)
+	}
+	if len(kcs) > 1 {
+		return fmt.Errorf("too many Kubernetes clusters returned")
+	}
+	err = writeKubeconfig(kubeconfigPath, kcs[0])
+	if err != nil {
+		return err
+	}
+	return nil
+}
+
+type kubernetesCluster struct {
+	name    string
+	url     *url.URL
+	version string
+}
+
+func getKubernetesClusters(ctx context.Context, peers []*proto.PeerState, nameFilter string) ([]kubernetesCluster, error) {
+	transport := http.DefaultTransport.(*http.Transport).Clone()
+	transport.TLSClientConfig = &tls.Config{
+		InsecureSkipVerify: true,
+	}
+	httpClient := &http.Client{
+		Transport: transport,
+	}
+	resolver := net.Resolver{
+		// Required so both DNS records are returned.
+		// https://github.com/golang/go/issues/17093
+		PreferGo: true,
+	}
+
+	kcs := []kubernetesCluster{}
+	attempted := map[string]struct{}{}
+	for _, peer := range peers {
+		fqdns, err := resolver.LookupAddr(ctx, peer.IP)
+		if err != nil {
+			return nil, err
+		}
+		for _, fqdn := range fqdns {
+			if _, ok := attempted[fqdn]; ok {
+				continue
+			}
+			attempted[fqdn] = struct{}{}
+			comps := strings.Split(fqdn, ".")
+			if len(comps) < 2 {
+				continue
+			}
+			if comps[1] != KubernetesDNSSuffix {
+				continue
+			}
+			if nameFilter != "" && nameFilter != comps[0] {
+				continue
+			}
+			clusterURL, clusterVersion, err := fingerprintClusters(ctx, httpClient, fqdn)
+			if err != nil {
+				log.Debugf("could not fingerprint Kubernetes cluster %s %q", fqdn, err)
+				continue
+			}
+			kc := kubernetesCluster{
+				name:    comps[0],
+				url:     clusterURL,
+				version: clusterVersion,
+			}
+			if nameFilter != "" {
+				return []kubernetesCluster{kc}, nil
+			}
+			kcs = append(kcs, kc)
+		}
+	}
+	return kcs, nil
+}
+
+func fingerprintClusters(ctx context.Context, httpClient *http.Client, fqdn string) (*url.URL, string, error) {
+	clusterURL, err := url.Parse("https://" + fqdn)
+	if err != nil {
+		return nil, "", err
+	}
+	versionURL, err := clusterURL.Parse("/version")
+	if err != nil {
+		return nil, "", err
+	}
+	req, err := http.NewRequestWithContext(ctx, http.MethodGet, versionURL.String(), nil)
+	if err != nil {
+		return nil, "", err
+	}
+	resp, err := httpClient.Do(req)
+	if err != nil {
+		return nil, "", err
+	}
+	defer resp.Body.Close()
+	if resp.StatusCode != http.StatusOK {
+		return nil, "", fmt.Errorf("expected %d response but got %s", http.StatusOK, resp.Status)
+	}
+	b, err := io.ReadAll(resp.Body)
+	if err != nil {
+		return nil, "", err
+	}
+	versionData := map[string]string{}
+	err = json.Unmarshal(b, &versionData)
+	if err != nil {
+		return nil, "", err
+	}
+	version, ok := versionData["gitVersion"]
+	if !ok {
+		return nil, "", errors.New("no version found in response")
+	}
+	return clusterURL, version, nil
+}
+
+func resolveKubeconfigPath(cmd *cobra.Command) (string, error) {
+	if cmd.Flags().Changed("kubeconfig") {
+		path, err := cmd.Flags().GetString("kubeconfig")
+		if err != nil {
+			return "", err
+		}
+		return path, nil
+	}
+	if env := os.Getenv("KUBECONFIG"); env != "" {
+		return env, nil
+	}
+	home, err := os.UserHomeDir()
+	if err != nil {
+		return "", fmt.Errorf("could not determine home directory: %w", err)
+	}
+	return filepath.Join(home, ".kube", "config"), nil
+}
+
+func writeKubeconfig(kubeconfigPath string, kc kubernetesCluster) error {
+	b, err := os.ReadFile(kubeconfigPath)
+	if err != nil && !errors.Is(err, os.ErrNotExist) {
+		return err
+	}
+	var cfg map[string]any
+	if err := yaml.Unmarshal(b, &cfg); err != nil {
+		return err
+	}
+	if cfg == nil {
+		cfg = map[string]any{
+			"apiVersion": "v1",
+			"kind":       "Config",
+		}
+	}
+
+	cfg["clusters"] = appendWithName(cfg["clusters"], map[string]any{
+		"name": kc.name,
+		"cluster": map[string]any{
+			"server":                   kc.url.String(),
+			"insecure-skip-tls-verify": true,
+		},
+	})
+	cfg["users"] = appendWithName(cfg["users"], map[string]any{
+		"name": "netbird",
+		"user": map[string]any{
+			"token": "none",
+		},
+	})
+	cfg["contexts"] = appendWithName(cfg["contexts"], map[string]any{
+		"name": kc.name,
+		"context": map[string]any{
+			"cluster":   kc.name,
+			"user":      "netbird",
+			"namespace": "default",
+		},
+	})
+	cfg["current-context"] = kc.name
+
+	out, err := yaml.Marshal(cfg)
+	if err != nil {
+		return err
+	}
+	if err := os.WriteFile(kubeconfigPath, out, 0o600); err != nil {
+		return err
+	}
+	return nil
+}
+
+func appendWithName(data any, add map[string]any) any {
+	if data == nil {
+		return []any{add}
+	}
+	v, ok := data.([]any)
+	if !ok {
+		return []any{add}
+	}
+	i := slices.IndexFunc(v, func(item any) bool {
+		m, ok := item.(map[string]any)
+		if !ok {
+			return false
+		}
+		return m["name"] == add["name"]
+	})
+	if i == -1 {
+		return append(v, add)
+	}
+	v[i] = add
+	return v
+}

client/cmd/kubernetes_test.go

@@ -0,0 +1,120 @@
+package cmd
+
+import (
+	"net/http"
+	"net/http/httptest"
+	"net/url"
+	"os"
+	"path/filepath"
+	"testing"
+
+	"github.com/spf13/cobra"
+	"github.com/stretchr/testify/require"
+)
+
+func TestFingerprintClusters(t *testing.T) {
+	t.Parallel()
+
+	srv := httptest.NewTLSServer(http.HandlerFunc(func(w http.ResponseWriter, r *http.Request) {
+		//nolint: errcheck
+		w.Write([]byte(`{"gitVersion": "foobar"}`))
+	}))
+	defer srv.Close()
+
+	clusterURL, clusterVersion, err := fingerprintClusters(t.Context(), srv.Client(), srv.Listener.Addr().String())
+	require.NoError(t, err)
+	require.Equal(t, srv.URL, clusterURL.String())
+	require.Equal(t, "foobar", clusterVersion)
+}
+
+func TestResolveKubeconfigPath(t *testing.T) {
+	home, err := os.UserHomeDir()
+	if err != nil {
+		t.Fatalf("could not determine home directory: %v", err)
+	}
+	defaultPath := filepath.Join(home, ".kube", "config")
+	path, err := resolveKubeconfigPath(&cobra.Command{})
+	require.NoError(t, err)
+	require.Equal(t, defaultPath, path)
+
+	flagPath := "flag-path"
+	cmd := &cobra.Command{}
+	cmd.Flags().String("kubeconfig", "", "")
+	err = cmd.Flags().Set("kubeconfig", flagPath)
+	require.NoError(t, err)
+	path, err = resolveKubeconfigPath(cmd)
+	require.NoError(t, err)
+	require.Equal(t, flagPath, path)
+
+	envPath := "env-path"
+	t.Setenv("KUBECONFIG", envPath)
+	path, err = resolveKubeconfigPath(&cobra.Command{})
+	require.NoError(t, err)
+	require.Equal(t, envPath, path)
+}
+
+func TestWriteKubeconfig(t *testing.T) {
+	t.Parallel()
+
+	tests := []struct {
+		name     string
+		existing string
+	}{
+		{
+			name: "empty file",
+		},
+		{
+			name: "existing content",
+			existing: `apiVersion: v1
+clusters:
+- cluster:
+    insecure-skip-tls-verify: true
+    server: https://foobar.com
+  name: foo
+current-context: test
+kind: Config
+users: []
+`,
+		},
+	}
+	for _, tt := range tests {
+		t.Run(tt.name, func(t *testing.T) {
+			t.Parallel()
+
+			kubeconfigPath := filepath.Join(t.TempDir(), "config")
+			err := os.WriteFile(kubeconfigPath, []byte(tt.existing), 0o644)
+			require.NoError(t, err)
+
+			kc := kubernetesCluster{
+				name: "foo",
+				url:  &url.URL{Scheme: "https", Host: "example.com"},
+			}
+			err = writeKubeconfig(kubeconfigPath, kc)
+			require.NoError(t, err)
+
+			b, err := os.ReadFile(kubeconfigPath)
+			require.NoError(t, err)
+			expected := `apiVersion: v1
+clusters:
+- cluster:
+    insecure-skip-tls-verify: true
+    server: https://example.com
+  name: foo
+contexts:
+- context:
+    cluster: foo
+    namespace: default
+    user: netbird
+  name: foo
+current-context: foo
+kind: Config
+users:
+- name: netbird
+  user:
+    token: none
+`
+			require.Equal(t, expected, string(b))
+		})
+	}
+
+}

client/cmd/login.go

@@ -22,19 +22,11 @@ import (
 	"github.com/netbirdio/netbird/util"
 )
 
-// extendSessionFlag drives the `netbird login --extend` flow: refresh the
-// SSO session expiry on the management server without tearing down the
-// tunnel. Mutually exclusive with setup-key login (a setup-key cannot
-// refresh an SSO-tracked peer — see auth.errSetupKeyOnSSOExpiredPeer).
-var extendSessionFlag bool
-
 func init() {
 	loginCmd.PersistentFlags().BoolVar(&noBrowser, noBrowserFlag, false, noBrowserDesc)
 	loginCmd.PersistentFlags().BoolVar(&showQR, showQRFlag, false, showQRDesc)
 	loginCmd.PersistentFlags().StringVar(&profileName, profileNameFlag, "", profileNameDesc)
 	loginCmd.PersistentFlags().StringVarP(&configPath, "config", "c", "", "(DEPRECATED) Netbird config file location")
-	loginCmd.PersistentFlags().BoolVar(&extendSessionFlag, "extend", false,
-		"refresh the SSO session expiry without tearing down the tunnel (requires an active connection)")
 }
 
 var loginCmd = &cobra.Command{
@@ -69,16 +61,6 @@ var loginCmd = &cobra.Command{
 			return err
 		}
 
-		if extendSessionFlag {
-			if providedSetupKey != "" {
-				return fmt.Errorf("--extend cannot be combined with a setup key; setup keys can only enrol new peers")
-			}
-			if err := doExtendSession(ctx, cmd); err != nil {
-				return fmt.Errorf("extend session failed: %v", err)
-			}
-			return nil
-		}
-
 		// workaround to run without service
 		if util.FindFirstLogPath(logFiles) == "" {
 			if err := doForegroundLogin(ctx, cmd, providedSetupKey, activeProf); err != nil {
@@ -114,17 +96,19 @@ func doDaemonLogin(ctx context.Context, cmd *cobra.Command, providedSetupKey str
 		dnsLabelsReq = dnsLabelsValidated.ToSafeStringList()
 	}
 
+	handle := activeProf.ID.String()
+
 	loginRequest := proto.LoginRequest{
 		SetupKey:            providedSetupKey,
 		ManagementUrl:       managementURL,
 		IsUnixDesktopClient: isUnixRunningDesktop(),
 		Hostname:            hostName,
 		DnsLabels:           dnsLabelsReq,
-		ProfileName:         &activeProf.Name,
+		ProfileName:         &handle,
 		Username:            &username,
 	}
 
-	profileState, err := pm.GetProfileState(activeProf.Name)
+	profileState, err := pm.GetProfileState(activeProf.ID)
 	if err != nil {
 		log.Debugf("failed to get profile state for login hint: %v", err)
 	} else if profileState.Email != "" {
@@ -168,65 +152,6 @@ func doDaemonLogin(ctx context.Context, cmd *cobra.Command, providedSetupKey str
 	return nil
 }
 
-// doExtendSession drives the daemon's RequestExtendAuthSession /
-// WaitExtendAuthSession pair. The user is sent through a regular SSO flow
-// (browser + verification URL) and the resulting JWT is forwarded to the
-// management server's ExtendAuthSession RPC. The tunnel stays up
-// throughout — no Down/Up, no network-map resync.
-func doExtendSession(ctx context.Context, cmd *cobra.Command) error {
-	conn, err := DialClientGRPCServer(ctx, daemonAddr)
-	if err != nil {
-		//nolint
-		return fmt.Errorf("failed to connect to daemon error: %v\n"+
-			"If the daemon is not running please run: "+
-			"\nnetbird service install \nnetbird service start\n", err)
-	}
-	defer conn.Close()
-
-	client := proto.NewDaemonServiceClient(conn)
-
-	req := &proto.RequestExtendAuthSessionRequest{}
-	// Pre-fill the IdP login hint from the active profile so the user
-	// doesn't have to retype their email. Best-effort: we still proceed
-	// without a hint if the lookup fails.
-	pm := profilemanager.NewProfileManager()
-	if active, perr := pm.GetActiveProfile(); perr == nil {
-		if profState, sperr := pm.GetProfileState(active.Name); sperr == nil && profState.Email != "" {
-			req.Hint = &profState.Email
-		}
-	}
-
-	startResp, err := client.RequestExtendAuthSession(ctx, req)
-	if err != nil {
-		return fmt.Errorf("start extend session: %v", err)
-	}
-
-	uri := startResp.GetVerificationURIComplete()
-	if uri == "" {
-		uri = startResp.GetVerificationURI()
-	}
-	openURL(cmd, uri, startResp.GetUserCode(), noBrowser, showQR)
-
-	waitResp, err := client.WaitExtendAuthSession(ctx, &proto.WaitExtendAuthSessionRequest{
-		DeviceCode: startResp.GetDeviceCode(),
-		UserCode:   startResp.GetUserCode(),
-	})
-	if err != nil {
-		return fmt.Errorf("wait for extend session: %v", err)
-	}
-
-	if ts := waitResp.GetSessionExpiresAt(); ts.IsValid() && !ts.AsTime().IsZero() {
-		deadline := ts.AsTime().Local()
-		cmd.Printf("Session extended. New expiry: %s\n", deadline.Format("2006-01-02 15:04:05 MST"))
-	} else {
-		// Management reported the peer is not eligible (e.g. login
-		// expiration disabled on the account). Surface that fact
-		// instead of pretending the call succeeded.
-		cmd.Println("Session extension call completed, but the management server did not return a new deadline (peer may not be SSO-tracked or login expiration is disabled).")
-	}
-	return nil
-}
-
 func getActiveProfile(ctx context.Context, pm *profilemanager.ProfileManager, profileName string, username string) (*profilemanager.Profile, error) {
 	// switch profile if provided
 
@@ -247,14 +172,13 @@ func getActiveProfile(ctx context.Context, pm *profilemanager.ProfileManager, pr
 	return activeProf, nil
 }
 
-func switchProfileOnDaemon(ctx context.Context, pm *profilemanager.ProfileManager, profileName string, username string) error {
-	err := switchProfile(context.Background(), profileName, username)
+func switchProfileOnDaemon(ctx context.Context, pm *profilemanager.ProfileManager, handle string, username string) error {
+	resolvedID, err := switchProfile(ctx, handle, username)
 	if err != nil {
 		return fmt.Errorf("switch profile on daemon: %v", err)
 	}
 
-	err = pm.SwitchProfile(profileName)
-	if err != nil {
+	if err := pm.SwitchProfile(resolvedID); err != nil {
 		return fmt.Errorf("switch profile: %v", err)
 	}
 
@@ -282,11 +206,15 @@ func switchProfileOnDaemon(ctx context.Context, pm *profilemanager.ProfileManage
 	return nil
 }
 
-func switchProfile(ctx context.Context, profileName string, username string) error {
+// switchProfile asks the daemon to switch to the profile identified by
+// handle (a name, ID, or unique ID prefix). Returns the resolved profile
+// ID so the caller can update the local active-profile state without
+// re-resolving the handle.
+func switchProfile(ctx context.Context, handle string, username string) (profilemanager.ID, error) {
 	conn, err := DialClientGRPCServer(ctx, daemonAddr)
 	if err != nil {
 		//nolint
-		return fmt.Errorf("failed to connect to daemon error: %v\n"+
+		return "", fmt.Errorf("failed to connect to daemon error: %v\n"+
 			"If the daemon is not running please run: "+
 			"\nnetbird service install \nnetbird service start\n", err)
 	}
@@ -294,15 +222,15 @@ func switchProfile(ctx context.Context, profileName string, username string) err
 
 	client := proto.NewDaemonServiceClient(conn)
 
-	_, err = client.SwitchProfile(ctx, &proto.SwitchProfileRequest{
-		ProfileName: &profileName,
+	resp, err := client.SwitchProfile(ctx, &proto.SwitchProfileRequest{
+		ProfileName: &handle,
 		Username:    &username,
 	})
 	if err != nil {
-		return fmt.Errorf("switch profile failed: %v", err)
+		return "", fmt.Errorf("switch profile failed: %v", err)
 	}
 
-	return nil
+	return profilemanager.ID(resp.Id), nil
 }
 
 func doForegroundLogin(ctx context.Context, cmd *cobra.Command, setupKey string, activeProf *profilemanager.Profile) error {
@@ -326,7 +254,7 @@ func doForegroundLogin(ctx context.Context, cmd *cobra.Command, setupKey string,
 		return fmt.Errorf("read config file %s: %v", configFilePath, err)
 	}
 
-	err = foregroundLogin(ctx, cmd, config, setupKey, activeProf.Name)
+	err = foregroundLogin(ctx, cmd, config, setupKey, activeProf.ID)
 	if err != nil {
 		return fmt.Errorf("foreground login failed: %v", err)
 	}
@@ -354,7 +282,7 @@ func handleSSOLogin(ctx context.Context, cmd *cobra.Command, loginResp *proto.Lo
 	return nil
 }
 
-func foregroundLogin(ctx context.Context, cmd *cobra.Command, config *profilemanager.Config, setupKey, profileName string) error {
+func foregroundLogin(ctx context.Context, cmd *cobra.Command, config *profilemanager.Config, setupKey string, profileID profilemanager.ID) error {
 	authClient, err := auth.NewAuth(ctx, config.PrivateKey, config.ManagementURL, config)
 	if err != nil {
 		return fmt.Errorf("failed to create auth client: %v", err)
@@ -368,7 +296,7 @@ func foregroundLogin(ctx context.Context, cmd *cobra.Command, config *profileman
 
 	jwtToken := ""
 	if setupKey == "" && needsLogin {
-		tokenInfo, err := foregroundGetTokenInfo(ctx, cmd, config, profileName)
+		tokenInfo, err := foregroundGetTokenInfo(ctx, cmd, config, profileID)
 		if err != nil {
 			return fmt.Errorf("interactive sso login failed: %v", err)
 		}
@@ -383,10 +311,10 @@ func foregroundLogin(ctx context.Context, cmd *cobra.Command, config *profileman
 	return nil
 }
 
-func foregroundGetTokenInfo(ctx context.Context, cmd *cobra.Command, config *profilemanager.Config, profileName string) (*auth.TokenInfo, error) {
+func foregroundGetTokenInfo(ctx context.Context, cmd *cobra.Command, config *profilemanager.Config, profileID profilemanager.ID) (*auth.TokenInfo, error) {
 	hint := ""
 	pm := profilemanager.NewProfileManager()
-	profileState, err := pm.GetProfileState(profileName)
+	profileState, err := pm.GetProfileState(profileID)
 	if err != nil {
 		log.Debugf("failed to get profile state for login hint: %v", err)
 	} else if profileState.Email != "" {

client/cmd/login_test.go

@@ -27,7 +27,7 @@ func TestLogin(t *testing.T) {
 	profilemanager.ActiveProfileStatePath = tempDir + "/active_profile.json"
 	sm := profilemanager.ServiceManager{}
 	err = sm.SetActiveProfileState(&profilemanager.ActiveProfileState{
-		Name:     "default",
+		ID:       "default",
 		Username: currUser.Username,
 	})
 	if err != nil {

client/cmd/profile.go

@@ -2,11 +2,16 @@ package cmd
 
 import (
 	"context"
+	"errors"
 	"fmt"
 	"os/user"
+	"strings"
+	"text/tabwriter"
 	"time"
 
 	"github.com/spf13/cobra"
+	"google.golang.org/grpc/codes"
+	gstatus "google.golang.org/grpc/status"
 
 	"github.com/netbirdio/netbird/client/internal"
 	"github.com/netbirdio/netbird/client/internal/profilemanager"
@@ -14,6 +19,8 @@ import (
 	"github.com/netbirdio/netbird/util"
 )
 
+var profileListShowID bool
+
 var profileCmd = &cobra.Command{
 	Use:   "profile",
 	Short: "Manage NetBird client profiles",
@@ -31,27 +38,40 @@ var profileListCmd = &cobra.Command{
 var profileAddCmd = &cobra.Command{
 	Use:   "add <profile_name>",
 	Short: "Add a new profile",
-	Long:  `Add a new profile to the NetBird client. The profile name must be unique.`,
+	Long:  `Add a new profile. Profile name is free-form, a unique ID is generated for the on-disk config file.`,
 	Args:  cobra.ExactArgs(1),
 	RunE:  addProfileFunc,
 }
 
+var profileRenameCmd = &cobra.Command{
+	Use:   "rename <profile> <new_profile_name>",
+	Short: "Renames an existing profile",
+	Long:  `Renames an existing profile (by a name, ID, or unique ID prefix). Profile name is free-form.`,
+	Args:  cobra.ExactArgs(2),
+	RunE:  renameProfileFunc,
+}
+
 var profileRemoveCmd = &cobra.Command{
-	Use:   "remove <profile_name>",
-	Short: "Remove a profile",
-	Long:  `Remove a profile from the NetBird client. The profile must not be inactive.`,
-	Args:  cobra.ExactArgs(1),
-	RunE:  removeProfileFunc,
+	Use:     "remove <profile>",
+	Short:   "Remove a profile",
+	Long:    `Remove a profile by name, ID, or unique ID prefix.`,
+	Aliases: []string{"rm"},
+	Args:    cobra.ExactArgs(1),
+	RunE:    removeProfileFunc,
 }
 
 var profileSelectCmd = &cobra.Command{
-	Use:   "select <profile_name>",
+	Use:   "select <profile>",
 	Short: "Select a profile",
-	Long:  `Make the specified profile active. This will switch the client to use the selected profile's configuration.`,
+	Long:  `Make the specified profile active. Accepts a name, ID, or unique ID prefix.`,
 	Args:  cobra.ExactArgs(1),
 	RunE:  selectProfileFunc,
 }
 
+func init() {
+	profileListCmd.Flags().BoolVar(&profileListShowID, "show-id", false, "show the profile ID column")
+}
+
 func setupCmd(cmd *cobra.Command) error {
 	SetFlagsFromEnvVars(rootCmd)
 	SetFlagsFromEnvVars(cmd)
@@ -65,6 +85,7 @@ func setupCmd(cmd *cobra.Command) error {
 
 	return nil
 }
+
 func listProfilesFunc(cmd *cobra.Command, _ []string) error {
 	if err := setupCmd(cmd); err != nil {
 		return err
@@ -83,25 +104,33 @@ func listProfilesFunc(cmd *cobra.Command, _ []string) error {
 
 	daemonClient := proto.NewDaemonServiceClient(conn)
 
-	profiles, err := daemonClient.ListProfiles(cmd.Context(), &proto.ListProfilesRequest{
+	resp, err := daemonClient.ListProfiles(cmd.Context(), &proto.ListProfilesRequest{
 		Username: currUser.Username,
 	})
 	if err != nil {
 		return err
 	}
 
-	// list profiles, add a tick if the profile is active
-	cmd.Println("Found", len(profiles.Profiles), "profiles:")
-	for _, profile := range profiles.Profiles {
-		// use a cross to indicate the passive profiles
-		activeMarker := "✗"
-		if profile.IsActive {
-			activeMarker = "✓"
-		}
-		cmd.Println(activeMarker, profile.Name)
+	tw := tabwriter.NewWriter(cmd.OutOrStdout(), 0, 0, 2, ' ', 0)
+	if profileListShowID {
+		fmt.Fprintln(tw, "ID\tNAME\tACTIVE")
+	} else {
+		fmt.Fprintln(tw, "NAME\tACTIVE")
 	}
-
-	return nil
+	for _, profile := range resp.Profiles {
+		marker := ""
+		if profile.IsActive {
+			marker = "✓"
+		}
+		name := profilemanager.StripCtrlChars(profile.Name)
+		id := profilemanager.ID(profile.Id)
+		if profileListShowID {
+			fmt.Fprintf(tw, "%s\t%s\t%s\n", id.ShortID(), name, marker)
+		} else {
+			fmt.Fprintf(tw, "%s\t%s\n", name, marker)
+		}
+	}
+	return tw.Flush()
 }
 
 func addProfileFunc(cmd *cobra.Command, args []string) error {
@@ -121,21 +150,82 @@ func addProfileFunc(cmd *cobra.Command, args []string) error {
 	}
 
 	daemonClient := proto.NewDaemonServiceClient(conn)
-
 	profileName := args[0]
 
-	_, err = daemonClient.AddProfile(cmd.Context(), &proto.AddProfileRequest{
+	resp, err := daemonClient.AddProfile(cmd.Context(), &proto.AddProfileRequest{
 		ProfileName: profileName,
 		Username:    currUser.Username,
 	})
 	if err != nil {
+		return fmt.Errorf("add profile request: %w", err)
+	}
+
+	dupCount, _ := countProfilesWithName(cmd.Context(), daemonClient, currUser.Username, profileName)
+	if dupCount > 1 {
+		cmd.Printf("Warning: %d other profile(s) already use the name %q.\n", dupCount-1, profileName)
+		cmd.Println("Use `netbird profile list --show-id` to disambiguate later.")
+	}
+
+	id := profilemanager.ID(resp.Id)
+	cmd.Printf("Profile added: %s  %s\n", id.ShortID(), profilemanager.StripCtrlChars(profileName))
+	return nil
+
+}
+
+func renameProfileFunc(cmd *cobra.Command, args []string) error {
+	if err := setupCmd(cmd); err != nil {
 		return err
 	}
 
-	cmd.Println("Profile added successfully:", profileName)
+	conn, err := DialClientGRPCServer(cmd.Context(), daemonAddr)
+	if err != nil {
+		return fmt.Errorf("connect to service CLI interface: %w", err)
+	}
+	defer conn.Close()
+
+	currUser, err := user.Current()
+	if err != nil {
+		return fmt.Errorf("get current user: %w", err)
+	}
+
+	daemonClient := proto.NewDaemonServiceClient(conn)
+	handle := args[0]
+	newProfilename := args[1]
+
+	resp, err := daemonClient.RenameProfile(cmd.Context(), &proto.RenameProfileRequest{
+		Handle:         handle,
+		Username:       currUser.Username,
+		NewProfileName: newProfilename,
+	})
+	if err != nil {
+		return wrapAmbiguityError(err, handle)
+	}
+
+	dupCount, _ := countProfilesWithName(cmd.Context(), daemonClient, currUser.Username, newProfilename)
+	if dupCount > 1 {
+		cmd.Printf("Warning: %d other profile(s) already use the name %q.\n", dupCount-1, newProfilename)
+		cmd.Println("Use `netbird profile list --show-id` to disambiguate later.")
+	}
+
+	cmd.Printf("Profile renamed from %s to %s\n", profilemanager.StripCtrlChars(resp.OldProfileName), profilemanager.StripCtrlChars(newProfilename))
+
 	return nil
 }
 
+func countProfilesWithName(ctx context.Context, c proto.DaemonServiceClient, username, name string) (int, error) {
+	resp, err := c.ListProfiles(ctx, &proto.ListProfilesRequest{Username: username})
+	if err != nil {
+		return 0, err
+	}
+	n := 0
+	for _, p := range resp.Profiles {
+		if p.Name == name {
+			n++
+		}
+	}
+	return n, nil
+}
+
 func removeProfileFunc(cmd *cobra.Command, args []string) error {
 	if err := setupCmd(cmd); err != nil {
 		return err
@@ -153,18 +243,17 @@ func removeProfileFunc(cmd *cobra.Command, args []string) error {
 	}
 
 	daemonClient := proto.NewDaemonServiceClient(conn)
+	handle := args[0]
 
-	profileName := args[0]
-
-	_, err = daemonClient.RemoveProfile(cmd.Context(), &proto.RemoveProfileRequest{
-		ProfileName: profileName,
+	resp, err := daemonClient.RemoveProfile(cmd.Context(), &proto.RemoveProfileRequest{
+		ProfileName: handle,
 		Username:    currUser.Username,
 	})
 	if err != nil {
-		return err
+		return wrapAmbiguityError(err, handle)
 	}
 
-	cmd.Println("Profile removed successfully:", profileName)
+	cmd.Printf("Profile removed: %s\n", resp.Id)
 	return nil
 }
 
@@ -174,7 +263,7 @@ func selectProfileFunc(cmd *cobra.Command, args []string) error {
 	}
 
 	profileManager := profilemanager.NewProfileManager()
-	profileName := args[0]
+	handle := args[0]
 
 	currUser, err := user.Current()
 	if err != nil {
@@ -191,32 +280,15 @@ func selectProfileFunc(cmd *cobra.Command, args []string) error {
 
 	daemonClient := proto.NewDaemonServiceClient(conn)
 
-	profiles, err := daemonClient.ListProfiles(ctx, &proto.ListProfilesRequest{
-		Username: currUser.Username,
+	switchResp, err := daemonClient.SwitchProfile(ctx, &proto.SwitchProfileRequest{
+		ProfileName: &handle,
+		Username:    &currUser.Username,
 	})
 	if err != nil {
-		return fmt.Errorf("list profiles: %w", err)
+		return wrapAmbiguityError(err, handle)
 	}
 
-	var profileExists bool
-
-	for _, profile := range profiles.Profiles {
-		if profile.Name == profileName {
-			profileExists = true
-			break
-		}
-	}
-
-	if !profileExists {
-		return fmt.Errorf("profile %s does not exist", profileName)
-	}
-
-	if err := switchProfile(cmd.Context(), profileName, currUser.Username); err != nil {
-		return err
-	}
-
-	err = profileManager.SwitchProfile(profileName)
-	if err != nil {
+	if err := profileManager.SwitchProfile(profilemanager.ID(switchResp.Id)); err != nil {
 		return err
 	}
 
@@ -231,6 +303,30 @@ func selectProfileFunc(cmd *cobra.Command, args []string) error {
 		}
 	}
 
-	cmd.Println("Profile switched successfully to:", profileName)
+	id := profilemanager.ID(switchResp.Id)
+	cmd.Printf("Profile switched to: %s\n", id.ShortID())
 	return nil
 }
+
+// wrapAmbiguityError turns the daemon's gRPC InvalidArgument errors
+// (which carry the resolver's message verbatim) into CLI-friendly text
+// that points the user at --show-id.
+func wrapAmbiguityError(err error, handle string) error {
+	if err == nil {
+		return nil
+	}
+	st, ok := gstatus.FromError(err)
+	if !ok {
+		return err
+	}
+	switch st.Code() {
+	case codes.InvalidArgument:
+		msg := st.Message()
+		if strings.Contains(msg, "ambiguous") {
+			return errors.New(msg + "\nRun `netbird profile list --show-id` to see IDs, then select by ID prefix:\n  netbird profile select|remove <id-prefix>")
+		}
+	case codes.NotFound:
+		return fmt.Errorf("profile %q not found", handle)
+	}
+	return err
+}

client/cmd/root.go

@@ -95,7 +95,9 @@ var (
 	}
 )
 
-// Execute executes the root command.
+// Execute runs the appropriate Cobra command for the CLI.
+// If the process is the update binary it delegates to updateCmd; otherwise it runs the root command.
+// It returns any error produced during command execution.
 func Execute() error {
 	if isUpdateBinary() {
 		return updateCmd.Execute()
@@ -103,6 +105,16 @@ func Execute() error {
 	return rootCmd.Execute()
 }
 
+// init initialises package-level defaults and configures the root
+// Cobra command tree. Sets platform-specific config / log directory
+// paths (including legacy Wiretrustee fallbacks) and a default daemon
+// address; registers persistent CLI flags (daemon address,
+// management / admin URLs, logging, setup key (file and inline,
+// mutually exclusive), preshared key, hostname, anonymise, config
+// path); attaches top-level and nested subcommands to the root
+// command; and registers `up`-specific persistent flags (external IP
+// maps, custom DNS resolver address, Rosenpass options, auto-connect
+// disabling, lazy connection).
 func init() {
 	defaultConfigPathDir = "/etc/netbird/"
 	defaultLogFileDir = "/var/log/netbird/"
@@ -168,10 +180,17 @@ func init() {
 	logCmd.AddCommand(logLevelCmd)
 	debugCmd.AddCommand(forCmd)
 	debugCmd.AddCommand(persistenceCmd)
+	debugCmd.AddCommand(debugConfigCmd)
+
+	// kubernetes commands
+	rootCmd.AddCommand(kubernetesCmd)
+	kubernetesCmd.AddCommand(kubernetesListCmd)
+	kubernetesCmd.AddCommand(kubernetesWriteKubeconfigCmd)
 
 	// profile commands
 	profileCmd.AddCommand(profileListCmd)
 	profileCmd.AddCommand(profileAddCmd)
+	profileCmd.AddCommand(profileRenameCmd)
 	profileCmd.AddCommand(profileRemoveCmd)
 	profileCmd.AddCommand(profileSelectCmd)
 

client/cmd/service_controller.go

@@ -102,7 +102,7 @@ func (p *program) Stop(srv service.Service) error {
 }
 
 // Common setup for service control commands
-func setupServiceControlCommand(cmd *cobra.Command, ctx context.Context, cancel context.CancelFunc) (service.Service, error) {
+func setupServiceControlCommand(cmd *cobra.Command, ctx context.Context, cancel context.CancelFunc, consoleLog bool) (service.Service, error) {
 	// rootCmd env vars are already applied by PersistentPreRunE.
 	SetFlagsFromEnvVars(serviceCmd)
 
@@ -112,8 +112,14 @@ func setupServiceControlCommand(cmd *cobra.Command, ctx context.Context, cancel
 		return nil, err
 	}
 
-	if err := util.InitLog(logLevel, logFiles...); err != nil {
-		return nil, fmt.Errorf("init log: %w", err)
+	if consoleLog {
+		if err := util.InitLog(logLevel, util.LogConsole); err != nil {
+			return nil, fmt.Errorf("init log: %w", err)
+		}
+	} else {
+		if err := util.InitLog(logLevel, logFiles...); err != nil {
+			return nil, fmt.Errorf("init log: %w", err)
+		}
 	}
 
 	cfg, err := newSVCConfig()
@@ -138,7 +144,7 @@ var runCmd = &cobra.Command{
 		SetupCloseHandler(ctx, cancel)
 		SetupDebugHandler(ctx, nil, nil, nil, util.FindFirstLogPath(logFiles))
 
-		s, err := setupServiceControlCommand(cmd, ctx, cancel)
+		s, err := setupServiceControlCommand(cmd, ctx, cancel, false)
 		if err != nil {
 			return err
 		}
@@ -152,7 +158,7 @@ var startCmd = &cobra.Command{
 	Short: "starts NetBird service",
 	RunE: func(cmd *cobra.Command, args []string) error {
 		ctx, cancel := context.WithCancel(cmd.Context())
-		s, err := setupServiceControlCommand(cmd, ctx, cancel)
+		s, err := setupServiceControlCommand(cmd, ctx, cancel, false)
 		if err != nil {
 			return err
 		}
@@ -170,7 +176,7 @@ var stopCmd = &cobra.Command{
 	Short: "stops NetBird service",
 	RunE: func(cmd *cobra.Command, args []string) error {
 		ctx, cancel := context.WithCancel(cmd.Context())
-		s, err := setupServiceControlCommand(cmd, ctx, cancel)
+		s, err := setupServiceControlCommand(cmd, ctx, cancel, false)
 		if err != nil {
 			return err
 		}
@@ -188,7 +194,7 @@ var restartCmd = &cobra.Command{
 	Short: "restarts NetBird service",
 	RunE: func(cmd *cobra.Command, args []string) error {
 		ctx, cancel := context.WithCancel(cmd.Context())
-		s, err := setupServiceControlCommand(cmd, ctx, cancel)
+		s, err := setupServiceControlCommand(cmd, ctx, cancel, false)
 		if err != nil {
 			return err
 		}
@@ -206,7 +212,7 @@ var svcStatusCmd = &cobra.Command{
 	Short: "shows NetBird service status",
 	RunE: func(cmd *cobra.Command, args []string) error {
 		ctx, cancel := context.WithCancel(cmd.Context())
-		s, err := setupServiceControlCommand(cmd, ctx, cancel)
+		s, err := setupServiceControlCommand(cmd, ctx, cancel, true)
 		if err != nil {
 			return err
 		}

client/cmd/status.go

@@ -6,7 +6,6 @@ import (
 	"net"
 	"net/netip"
 	"strings"
-	"time"
 
 	"github.com/spf13/cobra"
 	"google.golang.org/grpc/status"
@@ -118,11 +117,6 @@ func statusFunc(cmd *cobra.Command, args []string) error {
 		profName = activeProf.Name
 	}
 
-	var sessionExpiresAt time.Time
-	if ts := resp.GetSessionExpiresAt(); ts.IsValid() {
-		sessionExpiresAt = ts.AsTime().UTC()
-	}
-
 	var outputInformationHolder = nbstatus.ConvertToStatusOutputOverview(resp.GetFullStatus(), nbstatus.ConvertOptions{
 		Anonymize:            anonymizeFlag,
 		DaemonVersion:        resp.GetDaemonVersion(),
@@ -133,7 +127,6 @@ func statusFunc(cmd *cobra.Command, args []string) error {
 		IPsFilter:            ipsFilterMap,
 		ConnectionTypeFilter: connectionTypeFilter,
 		ProfileName:          profName,
-		SessionExpiresAt:     sessionExpiresAt,
 	})
 	var statusOutputString string
 	switch {

client/cmd/up.go

@@ -128,13 +128,12 @@ func upFunc(cmd *cobra.Command, args []string) error {
 	var profileSwitched bool
 	// switch profile if provided
 	if profileName != "" {
-		err = switchProfile(cmd.Context(), profileName, username.Username)
+		resolvedID, err := switchProfile(cmd.Context(), profileName, username.Username)
 		if err != nil {
 			return fmt.Errorf("switch profile: %v", err)
 		}
 
-		err = pm.SwitchProfile(profileName)
-		if err != nil {
+		if err := pm.SwitchProfile(resolvedID); err != nil {
 			return fmt.Errorf("switch profile: %v", err)
 		}
 
@@ -190,7 +189,7 @@ func runInForegroundMode(ctx context.Context, cmd *cobra.Command, activeProf *pr
 
 	_, _ = profilemanager.UpdateOldManagementURL(ctx, config, configFilePath)
 
-	err = foregroundLogin(ctx, cmd, config, providedSetupKey, activeProf.Name)
+	err = foregroundLogin(ctx, cmd, config, providedSetupKey, activeProf.ID)
 	if err != nil {
 		return fmt.Errorf("foreground login failed: %v", err)
 	}
@@ -261,10 +260,10 @@ func runInDaemonMode(ctx context.Context, cmd *cobra.Command, pm *profilemanager
 	}
 
 	// set the new config
-	req := setupSetConfigReq(customDNSAddressConverted, cmd, activeProf.Name, username.Username)
+	req := setupSetConfigReq(customDNSAddressConverted, cmd, activeProf.ID.String(), username.Username)
 	if _, err := client.SetConfig(ctx, req); err != nil {
 		if st, ok := gstatus.FromError(err); ok && st.Code() == codes.Unavailable {
-			log.Warnf("setConfig method is not available in the daemon")
+			log.Warnf("setConfig method is not available in the daemon: %s", st.Message())
 		} else {
 			return fmt.Errorf("call service setConfig method: %v", err)
 		}
@@ -289,10 +288,11 @@ func doDaemonUp(ctx context.Context, cmd *cobra.Command, client proto.DaemonServ
 		return fmt.Errorf("setup login request: %v", err)
 	}
 
-	loginRequest.ProfileName = &activeProf.Name
+	profileID := activeProf.ID.String()
+	loginRequest.ProfileName = &profileID
 	loginRequest.Username = &username
 
-	profileState, err := pm.GetProfileState(activeProf.Name)
+	profileState, err := pm.GetProfileState(activeProf.ID)
 	if err != nil {
 		log.Debugf("failed to get profile state for login hint: %v", err)
 	} else if profileState.Email != "" {
@@ -329,7 +329,7 @@ func doDaemonUp(ctx context.Context, cmd *cobra.Command, client proto.DaemonServ
 	}
 
 	if _, err := client.Up(ctx, &proto.UpRequest{
-		ProfileName: &activeProf.Name,
+		ProfileName: &profileID,
 		Username:    &username,
 	}); err != nil {
 		return fmt.Errorf("call service up method: %v", err)

client/cmd/up_daemon_test.go

@@ -29,14 +29,14 @@ func TestUpDaemon(t *testing.T) {
 	}
 
 	sm := profilemanager.ServiceManager{}
-	err = sm.AddProfile("test1", currUser.Username)
+	created, err := sm.AddProfile("test1", currUser.Username)
 	if err != nil {
 		t.Fatalf("failed to add profile: %v", err)
 		return
 	}
 
 	err = sm.SetActiveProfileState(&profilemanager.ActiveProfileState{
-		Name:     "test1",
+		ID:       created.ID,
 		Username: currUser.Username,
 	})
 	if err != nil {

client/cmd/version.go

@@ -12,7 +12,13 @@ var (
 		Short: "Print the NetBird's client application version",
 		Run: func(cmd *cobra.Command, args []string) {
 			cmd.SetOut(cmd.OutOrStdout())
-			cmd.Println(version.NetbirdVersion())
+			out := version.NetbirdVersion()
+			if version.IsDevelopmentVersion(out) {
+				if commit := version.NetbirdCommit(); commit != "" {
+					out += "-" + commit
+				}
+			}
+			cmd.Println(out)
 		},
 	}
 )

client/embed/embed.go

@@ -279,6 +279,10 @@ func (c *Client) Start(startCtx context.Context) error {
 
 	select {
 	case <-startCtx.Done():
+		// Cancel the client context before stopping: Engine.Start blocks on the
+		// signal stream while holding the engine mutex and only unblocks on
+		// cancellation. Stopping first would deadlock on that mutex.
+		cancel()
 		if stopErr := client.Stop(); stopErr != nil {
 			return fmt.Errorf("stop error after context done. Stop error: %w. Context done: %w", stopErr, startCtx.Err())
 		}
@@ -442,8 +446,8 @@ func (c *Client) Expose(ctx context.Context, req ExposeRequest) (*ExposeSession,
 
 // IdentityForIP looks up a remote peer by its tunnel IP using the
 // embedded client's status recorder. Returns the peer's WireGuard public
-// key and FQDN. ok=false means the IP isn't in this client's peer
-// roster — callers should treat that as "unknown peer".
+// key and FQDN. ok=false means the IP doesn't belong to an active peer
+// — offline roster peers are treated as unknown, same as foreign IPs.
 func (c *Client) IdentityForIP(ip netip.Addr) (pubKey, fqdn string, ok bool) {
 	if !ip.IsValid() || c.recorder == nil {
 		return "", "", false
@@ -464,7 +468,7 @@ func (c *Client) Status() (peer.FullStatus, error) {
 	if connect != nil {
 		engine := connect.Engine()
 		if engine != nil {
-			_ = engine.RunHealthProbes(context.Background(), false)
+			_ = engine.RunHealthProbes(false)
 		}
 	}
 

client/embed/embed_test.go

@@ -0,0 +1,168 @@
+package embed
+
+import (
+	"context"
+	"net"
+	"testing"
+	"time"
+
+	"github.com/golang/mock/gomock"
+	"github.com/stretchr/testify/require"
+	"google.golang.org/grpc"
+
+	"github.com/netbirdio/netbird/management/internals/controllers/network_map/controller"
+	"github.com/netbirdio/netbird/management/internals/controllers/network_map/update_channel"
+	"github.com/netbirdio/netbird/management/internals/modules/peers"
+	"github.com/netbirdio/netbird/management/internals/modules/peers/ephemeral/manager"
+	"github.com/netbirdio/netbird/management/internals/server/config"
+	nbgrpc "github.com/netbirdio/netbird/management/internals/shared/grpc"
+	mgmt "github.com/netbirdio/netbird/management/server"
+	"github.com/netbirdio/netbird/management/server/activity"
+	nbcache "github.com/netbirdio/netbird/management/server/cache"
+	"github.com/netbirdio/netbird/management/server/groups"
+	"github.com/netbirdio/netbird/management/server/integrations/integrated_validator/validator"
+	"github.com/netbirdio/netbird/management/server/integrations/port_forwarding"
+	"github.com/netbirdio/netbird/management/server/job"
+	"github.com/netbirdio/netbird/management/server/permissions"
+	"github.com/netbirdio/netbird/management/server/settings"
+	"github.com/netbirdio/netbird/management/server/store"
+	"github.com/netbirdio/netbird/management/server/telemetry"
+	"github.com/netbirdio/netbird/management/server/types"
+	mgmtProto "github.com/netbirdio/netbird/shared/management/proto"
+	"github.com/netbirdio/netbird/util"
+)
+
+const testSetupKey = "A2C8E62B-38F5-4553-B31E-DD66C696CEBB"
+
+// TestClientStartTimeoutRollback reproduces a deadlock between Engine.Start and
+// Engine.Stop. The signal endpoint accepts gRPC connections but never serves the
+// SignalExchange service, so Engine.Start parks in WaitStreamConnected while
+// holding the engine mutex. When the Start context expires, the rollback path
+// calls ConnectClient.Stop, which must not block forever acquiring that mutex.
+func TestClientStartTimeoutRollback(t *testing.T) {
+	signalAddr := startBlackholeSignal(t)
+	mgmAddr := startManagement(t, signalAddr)
+
+	wgPort := 0
+	client, err := New(Options{
+		DeviceName:    "embed-rollback-test",
+		SetupKey:      testSetupKey,
+		ManagementURL: "http://" + mgmAddr,
+		WireguardPort: &wgPort,
+	})
+	require.NoError(t, err, "embed client creation must succeed")
+
+	startCtx, cancel := context.WithTimeout(context.Background(), 5*time.Second)
+	defer cancel()
+
+	startErr := make(chan error, 1)
+	go func() {
+		startErr <- client.Start(startCtx)
+	}()
+
+	select {
+	case err := <-startErr:
+		require.ErrorIs(t, err, context.DeadlineExceeded)
+	case <-time.After(60 * time.Second):
+		t.Fatal("client.Start did not return after its context expired: Engine.Stop deadlocked against Engine.Start waiting for the signal stream")
+	}
+}
+
+// startBlackholeSignal starts a gRPC server without the SignalExchange service
+// registered. Connections succeed, but the signal stream can never be
+// established, which keeps Engine.Start parked in WaitStreamConnected.
+func startBlackholeSignal(t *testing.T) string {
+	t.Helper()
+
+	lis, err := net.Listen("tcp", "localhost:0")
+	require.NoError(t, err)
+
+	s := grpc.NewServer()
+	go func() {
+		if err := s.Serve(lis); err != nil {
+			t.Error(err)
+		}
+	}()
+	t.Cleanup(s.Stop)
+
+	return lis.Addr().String()
+}
+
+func startManagement(t *testing.T, signalAddr string) string {
+	t.Helper()
+
+	cfg := &config.Config{
+		Stuns:      []*config.Host{},
+		TURNConfig: &config.TURNConfig{},
+		Relay: &config.Relay{
+			Addresses:      []string{"127.0.0.1:1234"},
+			CredentialsTTL: util.Duration{Duration: time.Hour},
+			Secret:         "222222222222222222",
+		},
+		Signal: &config.Host{
+			Proto: "http",
+			URI:   signalAddr,
+		},
+		Datadir:    t.TempDir(),
+		HttpConfig: nil,
+	}
+
+	lis, err := net.Listen("tcp", "localhost:0")
+	require.NoError(t, err)
+
+	s := grpc.NewServer()
+
+	testStore, cleanUp, err := store.NewTestStoreFromSQL(context.Background(), "../testdata/store.sql", cfg.Datadir)
+	require.NoError(t, err)
+	t.Cleanup(cleanUp)
+
+	eventStore := &activity.InMemoryEventStore{}
+
+	permissionsManager := permissions.NewManager(testStore)
+	peersManager := peers.NewManager(testStore, permissionsManager)
+	jobManager := job.NewJobManager(nil, testStore, peersManager)
+
+	cacheStore, err := nbcache.NewStore(context.Background(), 100*time.Millisecond, 300*time.Millisecond, 100)
+	require.NoError(t, err)
+
+	iv, err := validator.NewIntegratedValidator(context.Background(), peersManager, nil, eventStore, cacheStore)
+	require.NoError(t, err)
+	metrics, err := telemetry.NewDefaultAppMetrics(context.Background())
+	require.NoError(t, err)
+
+	ctrl := gomock.NewController(t)
+	t.Cleanup(ctrl.Finish)
+	settingsMockManager := settings.NewMockManager(ctrl)
+	settingsMockManager.EXPECT().
+		GetSettings(gomock.Any(), gomock.Any(), gomock.Any()).
+		Return(&types.Settings{}, nil).
+		AnyTimes()
+	settingsMockManager.EXPECT().
+		GetExtraSettings(gomock.Any(), gomock.Any()).
+		Return(&types.ExtraSettings{}, nil).
+		AnyTimes()
+
+	groupsManager := groups.NewManagerMock()
+
+	updateManager := update_channel.NewPeersUpdateManager(metrics)
+	requestBuffer := mgmt.NewAccountRequestBuffer(context.Background(), testStore)
+	networkMapController := controller.NewController(context.Background(), testStore, metrics, updateManager, requestBuffer, mgmt.MockIntegratedValidator{}, settingsMockManager, "netbird.selfhosted", port_forwarding.NewControllerMock(), manager.NewEphemeralManager(testStore, peersManager), cfg)
+	accountManager, err := mgmt.BuildManager(context.Background(), cfg, testStore, networkMapController, jobManager, nil, "", eventStore, nil, false, iv, metrics, port_forwarding.NewControllerMock(), settingsMockManager, permissionsManager, false, cacheStore)
+	require.NoError(t, err)
+
+	secretsManager, err := nbgrpc.NewTimeBasedAuthSecretsManager(updateManager, cfg.TURNConfig, cfg.Relay, settingsMockManager, groupsManager)
+	require.NoError(t, err)
+
+	mgmtServer, err := nbgrpc.NewServer(cfg, accountManager, settingsMockManager, jobManager, secretsManager, nil, nil, &mgmt.MockIntegratedValidator{}, networkMapController, nil, nil)
+	require.NoError(t, err)
+	mgmtProto.RegisterManagementServiceServer(s, mgmtServer)
+
+	go func() {
+		if err := s.Serve(lis); err != nil {
+			t.Error(err)
+		}
+	}()
+	t.Cleanup(s.Stop)
+
+	return lis.Addr().String()
+}

client/firewall/iptables/acl_linux.go

@@ -3,6 +3,7 @@ package iptables
 import (
 	"errors"
 	"fmt"
+	"maps"
 	"net"
 	"slices"
 
@@ -421,12 +422,17 @@ func (m *aclManager) updateState() {
 	currentState.Lock()
 	defer currentState.Unlock()
 
+	// Clone the maps so the persisted state holds a private snapshot. The
+	// live maps keep being mutated by subsequent rule operations while the
+	// state manager marshals the state from its periodic-save goroutine.
+	// Sharing them by reference races the two and aborts the process with a
+	// concurrent map iteration and write.
 	if m.v6 {
-		currentState.ACLEntries6 = m.entries
-		currentState.ACLIPsetStore6 = m.ipsetStore
+		currentState.ACLEntries6 = maps.Clone(m.entries)
+		currentState.ACLIPsetStore6 = m.ipsetStore.clone()
 	} else {
-		currentState.ACLEntries = m.entries
-		currentState.ACLIPsetStore = m.ipsetStore
+		currentState.ACLEntries = maps.Clone(m.entries)
+		currentState.ACLIPsetStore = m.ipsetStore.clone()
 	}
 
 	if err := m.stateManager.UpdateState(currentState); err != nil {

client/firewall/iptables/router_linux.go

@@ -4,6 +4,7 @@ package iptables
 
 import (
 	"fmt"
+	"maps"
 	"net/netip"
 	"strconv"
 	"strings"
@@ -749,11 +750,17 @@ func (r *router) updateState() {
 	currentState.Lock()
 	defer currentState.Unlock()
 
+	// Clone the rule map so the persisted state holds a private snapshot. The
+	// live map keeps being mutated by subsequent rule operations while the
+	// state manager marshals the state from its periodic-save goroutine.
+	// Sharing it by reference races the two and aborts the process with a
+	// concurrent map iteration and write. The ipset counter guards itself
+	// during marshaling, so it can be shared directly.
 	if r.v6 {
-		currentState.RouteRules6 = r.rules
+		currentState.RouteRules6 = maps.Clone(r.rules)
 		currentState.RouteIPsetCounter6 = r.ipsetCounter
 	} else {
-		currentState.RouteRules = r.rules
+		currentState.RouteRules = maps.Clone(r.rules)
 		currentState.RouteIPsetCounter = r.ipsetCounter
 	}
 

client/firewall/iptables/rulestore_linux.go

@@ -1,6 +1,9 @@
 package iptables
 
-import "encoding/json"
+import (
+	"encoding/json"
+	"maps"
+)
 
 type ipList struct {
 	ips map[string]struct{}
@@ -19,6 +22,14 @@ func (s *ipList) addIP(ip string) {
 	s.ips[ip] = struct{}{}
 }
 
+// clone returns a deep copy of the ipList with its own ips map.
+func (s *ipList) clone() *ipList {
+	if s == nil {
+		return nil
+	}
+	return &ipList{ips: maps.Clone(s.ips)}
+}
+
 // MarshalJSON implements json.Marshaler
 func (s *ipList) MarshalJSON() ([]byte, error) {
 	return json.Marshal(struct {
@@ -55,6 +66,19 @@ func newIpsetStore() *ipsetStore {
 	}
 }
 
+// clone returns a deep copy of the ipsetStore with its own ipsets map and
+// independent ipList entries.
+func (s *ipsetStore) clone() *ipsetStore {
+	if s == nil {
+		return nil
+	}
+	cloned := &ipsetStore{ipsets: make(map[string]*ipList, len(s.ipsets))}
+	for name, list := range s.ipsets {
+		cloned.ipsets[name] = list.clone()
+	}
+	return cloned
+}
+
 func (s *ipsetStore) ipset(ipsetName string) (*ipList, bool) {
 	r, ok := s.ipsets[ipsetName]
 	return r, ok

client/firewall/uspfilter/forwarder/icmp.go

@@ -362,6 +362,10 @@ func (f *Forwarder) injectICMPv6Reply(id stack.TransportEndpointID, icmpPayload
 		return 0
 	}
 
+	if pc := f.endpoint.capture.Load(); pc != nil {
+		(*pc).Offer(fullPacket, true)
+	}
+
 	return len(fullPacket)
 }
 

client/iface/bind/ice_bind.go

@@ -41,7 +41,6 @@ type ICEBind struct {
 	*wgConn.StdNetBind
 
 	transportNet transport.Net
-	filterFn     udpmux.FilterFn
 	address      wgaddr.Address
 	mtu          uint16
 
@@ -61,12 +60,11 @@ type ICEBind struct {
 	ipv6Conn *net.UDPConn
 }
 
-func NewICEBind(transportNet transport.Net, filterFn udpmux.FilterFn, address wgaddr.Address, mtu uint16) *ICEBind {
+func NewICEBind(transportNet transport.Net, address wgaddr.Address, mtu uint16) *ICEBind {
 	b, _ := wgConn.NewStdNetBind().(*wgConn.StdNetBind)
 	ib := &ICEBind{
 		StdNetBind:       b,
 		transportNet:     transportNet,
-		filterFn:         filterFn,
 		address:          address,
 		mtu:              mtu,
 		endpoints:        make(map[netip.Addr]net.Conn),
@@ -265,7 +263,6 @@ func (s *ICEBind) createOrUpdateMux() {
 		udpmux.UniversalUDPMuxParams{
 			UDPConn:   muxConn,
 			Net:       s.transportNet,
-			FilterFn:  s.filterFn,
 			WGAddress: s.address,
 			MTU:       s.mtu,
 		},

client/iface/bind/ice_bind_test.go

@@ -289,7 +289,7 @@ func setupICEBind(t *testing.T) *ICEBind {
 		IP:      netip.MustParseAddr("100.64.0.1"),
 		Network: netip.MustParsePrefix("100.64.0.0/10"),
 	}
-	return NewICEBind(transportNet, nil, address, 1280)
+	return NewICEBind(transportNet, address, 1280)
 }
 
 func createDualStackConns(t *testing.T) (*net.UDPConn, *net.UDPConn) {

client/iface/device/device_filter.go

@@ -1,10 +1,13 @@
 package device
 
 import (
+	"fmt"
 	"net/netip"
+	"runtime/debug"
 	"sync"
 	"sync/atomic"
 
+	log "github.com/sirupsen/logrus"
 	"golang.zx2c4.com/wireguard/tun"
 )
 
@@ -41,10 +44,13 @@ type PacketCapture interface {
 type FilteredDevice struct {
 	tun.Device
 
-	filter    PacketFilter
-	capture   atomic.Pointer[PacketCapture]
-	mutex     sync.RWMutex
-	closeOnce sync.Once
+	filter  PacketFilter
+	capture atomic.Pointer[PacketCapture]
+	// panicHandler is invoked after a panic in the underlying device is
+	// recovered in Read or Write.
+	panicHandler atomic.Pointer[func()]
+	mutex        sync.RWMutex
+	closeOnce    sync.Once
 }
 
 // newDeviceFilter constructor function
@@ -70,7 +76,7 @@ func (d *FilteredDevice) Close() error {
 
 // Read wraps read method with filtering feature
 func (d *FilteredDevice) Read(bufs [][]byte, sizes []int, offset int) (n int, err error) {
-	if n, err = d.Device.Read(bufs, sizes, offset); err != nil {
+	if n, err = d.deviceRead(bufs, sizes, offset); err != nil {
 		return 0, err
 	}
 
@@ -112,7 +118,7 @@ func (d *FilteredDevice) Write(bufs [][]byte, offset int) (int, error) {
 	d.mutex.RUnlock()
 
 	if filter == nil {
-		return d.Device.Write(bufs, offset)
+		return d.deviceWrite(bufs, offset)
 	}
 
 	filteredBufs := make([][]byte, 0, len(bufs))
@@ -125,9 +131,44 @@ func (d *FilteredDevice) Write(bufs [][]byte, offset int) (int, error) {
 		}
 	}
 
-	n, err := d.Device.Write(filteredBufs, offset)
-	n += dropped
-	return n, err
+	n, err := d.deviceWrite(filteredBufs, offset)
+	if err != nil {
+		return n, err
+	}
+	return n + dropped, nil
+}
+
+// deviceRead calls the underlying device Read, recovering from panics in the
+// wintun read path and converting them into errors.
+func (d *FilteredDevice) deviceRead(bufs [][]byte, sizes []int, offset int) (n int, err error) {
+	defer d.recoverFromPanic("read", &n, &err)
+	return d.Device.Read(bufs, sizes, offset)
+}
+
+// deviceWrite calls the underlying device Write, recovering from panics in the
+// wintun write path and converting them into errors.
+func (d *FilteredDevice) deviceWrite(bufs [][]byte, offset int) (n int, err error) {
+	defer d.recoverFromPanic("write", &n, &err)
+	return d.Device.Write(bufs, offset)
+}
+
+// recoverFromPanic converts a panic in the underlying device into a regular
+// error and invokes the registered panic handler. The wintun read path is
+// known to panic on zero-length packets that third-party filter drivers can
+// place in the ring.
+func (d *FilteredDevice) recoverFromPanic(op string, n *int, err *error) {
+	r := recover()
+	if r == nil {
+		return
+	}
+
+	log.Errorf("recovered panic in tun device %s: %v\n%s", op, r, debug.Stack())
+	*n = 0
+	*err = fmt.Errorf("tun device %s panic: %v", op, r)
+
+	if handler := d.panicHandler.Load(); handler != nil {
+		(*handler)()
+	}
 }
 
 // SetFilter sets packet filter to device
@@ -137,6 +178,17 @@ func (d *FilteredDevice) SetFilter(filter PacketFilter) {
 	d.mutex.Unlock()
 }
 
+// SetPanicHandler registers a handler invoked after a recovered panic in Read
+// or Write. The device is unusable after such a panic; the handler should
+// trigger recreation of the interface. Pass nil to remove.
+func (d *FilteredDevice) SetPanicHandler(handler func()) {
+	if handler == nil {
+		d.panicHandler.Store(nil)
+		return
+	}
+	d.panicHandler.Store(&handler)
+}
+
 // SetCapture sets or clears the packet capture sink. Pass nil to disable.
 // Uses atomic store so the hot path (Read/Write) is a single pointer load
 // with no locking overhead when capture is off.

client/iface/device/device_filter_test.go

@@ -221,3 +221,60 @@ func TestDeviceWrapperRead(t *testing.T) {
 		}
 	})
 }
+
+func TestDeviceWrapperReadPanic(t *testing.T) {
+	ctrl := gomock.NewController(t)
+	defer ctrl.Finish()
+
+	tun := mocks.NewMockDevice(ctrl)
+	tun.EXPECT().Read(gomock.Any(), gomock.Any(), gomock.Any()).
+		DoAndReturn(func(bufs [][]byte, sizes []int, offset int) (int, error) {
+			// Reproduce the wintun zero-length packet panic (index out of range).
+			packet := make([]byte, 0)
+			return int(packet[0]), nil
+		})
+
+	wrapped := newDeviceFilter(tun)
+
+	handlerCalled := false
+	wrapped.SetPanicHandler(func() { handlerCalled = true })
+
+	n, err := wrapped.Read([][]byte{{}}, []int{0}, 0)
+	if err == nil {
+		t.Errorf("expected error from recovered panic, got nil")
+	}
+	if n != 0 {
+		t.Errorf("expected n=0, got %d", n)
+	}
+	if !handlerCalled {
+		t.Errorf("expected panic handler to be called")
+	}
+}
+
+func TestDeviceWrapperWritePanic(t *testing.T) {
+	ctrl := gomock.NewController(t)
+	defer ctrl.Finish()
+
+	tun := mocks.NewMockDevice(ctrl)
+	tun.EXPECT().Write(gomock.Any(), gomock.Any()).
+		DoAndReturn(func(bufs [][]byte, offset int) (int, error) {
+			packet := make([]byte, 0)
+			return int(packet[0]), nil
+		})
+
+	wrapped := newDeviceFilter(tun)
+
+	handlerCalled := false
+	wrapped.SetPanicHandler(func() { handlerCalled = true })
+
+	n, err := wrapped.Write([][]byte{{0x45, 0x00}}, 0)
+	if err == nil {
+		t.Errorf("expected error from recovered panic, got nil")
+	}
+	if n != 0 {
+		t.Errorf("expected n=0, got %d", n)
+	}
+	if !handlerCalled {
+		t.Errorf("expected panic handler to be called")
+	}
+}

client/iface/device/device_kernel_unix.go

@@ -32,8 +32,6 @@ type TunKernelDevice struct {
 	link       *wgLink
 	udpMuxConn net.PacketConn
 	udpMux     *udpmux.UniversalUDPMuxDefault
-
-	filterFn udpmux.FilterFn
 }
 
 func NewKernelDevice(name string, address wgaddr.Address, wgPort int, key string, mtu uint16, transportNet transport.Net) *TunKernelDevice {
@@ -104,7 +102,6 @@ func (t *TunKernelDevice) Up() (*udpmux.UniversalUDPMuxDefault, error) {
 	bindParams := udpmux.UniversalUDPMuxParams{
 		UDPConn:   nbnet.WrapPacketConn(rawSock),
 		Net:       t.transportNet,
-		FilterFn:  t.filterFn,
 		WGAddress: t.address,
 		MTU:       t.mtu,
 	}

client/iface/iface.go

@@ -63,7 +63,6 @@ type WGIFaceOpts struct {
 	MTU          uint16
 	MobileArgs   *device.MobileIFaceArguments
 	TransportNet transport.Net
-	FilterFn     udpmux.FilterFn
 	DisableDNS   bool
 }
 

client/iface/iface_new.go

@@ -11,7 +11,7 @@ import (
 
 // NewWGIFace Creates a new WireGuard interface instance
 func NewWGIFace(opts WGIFaceOpts) (*WGIface, error) {
-	iceBind := bind.NewICEBind(opts.TransportNet, opts.FilterFn, opts.Address, opts.MTU)
+	iceBind := bind.NewICEBind(opts.TransportNet, opts.Address, opts.MTU)
 
 	var tun WGTunDevice
 	if netstack.IsEnabled() {

client/iface/iface_new_android.go

@@ -9,7 +9,7 @@ import (
 
 // NewWGIFace Creates a new WireGuard interface instance
 func NewWGIFace(opts WGIFaceOpts) (*WGIface, error) {
-	iceBind := bind.NewICEBind(opts.TransportNet, opts.FilterFn, opts.Address, opts.MTU)
+	iceBind := bind.NewICEBind(opts.TransportNet, opts.Address, opts.MTU)
 
 	if netstack.IsEnabled() {
 		wgIFace := &WGIface{

client/iface/iface_new_ios.go

@@ -10,7 +10,7 @@ import (
 
 // NewWGIFace Creates a new WireGuard interface instance
 func NewWGIFace(opts WGIFaceOpts) (*WGIface, error) {
-	iceBind := bind.NewICEBind(opts.TransportNet, opts.FilterFn, opts.Address, opts.MTU)
+	iceBind := bind.NewICEBind(opts.TransportNet, opts.Address, opts.MTU)
 
 	wgIFace := &WGIface{
 		tun:            device.NewTunDevice(opts.IFaceName, opts.Address, opts.WGPort, opts.WGPrivKey, opts.MTU, iceBind, opts.MobileArgs.TunFd),

client/iface/iface_new_linux.go

@@ -14,7 +14,7 @@ import (
 // NewWGIFace Creates a new WireGuard interface instance
 func NewWGIFace(opts WGIFaceOpts) (*WGIface, error) {
 	if netstack.IsEnabled() {
-		iceBind := bind.NewICEBind(opts.TransportNet, opts.FilterFn, opts.Address, opts.MTU)
+		iceBind := bind.NewICEBind(opts.TransportNet, opts.Address, opts.MTU)
 		return &WGIface{
 			tun:            device.NewNetstackDevice(opts.IFaceName, opts.Address, opts.WGPort, opts.WGPrivKey, opts.MTU, iceBind, netstack.ListenAddr()),
 			userspaceBind:  true,
@@ -30,7 +30,7 @@ func NewWGIFace(opts WGIFaceOpts) (*WGIface, error) {
 	}
 
 	if device.ModuleTunIsLoaded() {
-		iceBind := bind.NewICEBind(opts.TransportNet, opts.FilterFn, opts.Address, opts.MTU)
+		iceBind := bind.NewICEBind(opts.TransportNet, opts.Address, opts.MTU)
 		return &WGIface{
 			tun:            device.NewTunDevice(opts.IFaceName, opts.Address, opts.WGPort, opts.WGPrivKey, opts.MTU, iceBind),
 			userspaceBind:  true,

client/iface/udpmux/universal.go

@@ -8,8 +8,6 @@ import (
 	"context"
 	"fmt"
 	"net"
-	"net/netip"
-	"sync"
 	"time"
 
 	log "github.com/sirupsen/logrus"
@@ -22,10 +20,6 @@ import (
 	"github.com/netbirdio/netbird/client/iface/wgaddr"
 )
 
-// FilterFn is a function that filters out candidates based on the address.
-// If it returns true, the address is to be filtered. It also returns the prefix of matching route.
-type FilterFn func(address netip.Addr) (bool, netip.Prefix, error)
-
 // UniversalUDPMuxDefault handles STUN and TURN servers packets by wrapping the original UDPConn
 // It then passes packets to the UDPMux that does the actual connection muxing.
 type UniversalUDPMuxDefault struct {
@@ -43,7 +37,6 @@ type UniversalUDPMuxParams struct {
 	UDPConn               net.PacketConn
 	XORMappedAddrCacheTTL time.Duration
 	Net                   transport.Net
-	FilterFn              FilterFn
 	WGAddress             wgaddr.Address
 	MTU                   uint16
 }
@@ -68,7 +61,6 @@ func NewUniversalUDPMuxDefault(params UniversalUDPMuxParams) *UniversalUDPMuxDef
 		PacketConn: params.UDPConn,
 		mux:        m,
 		logger:     params.Logger,
-		filterFn:   params.FilterFn,
 		address:    params.WGAddress,
 	}
 
@@ -115,15 +107,12 @@ func (m *UniversalUDPMuxDefault) ReadFromConn(ctx context.Context) {
 	}
 }
 
-// UDPConn is a wrapper around UDPMux conn that overrides ReadFrom and handles STUN/TURN packets
+// UDPConn is a wrapper around UDPMux conn that overrides WriteTo to drop packets destined for the overlay subnet.
 type UDPConn struct {
 	net.PacketConn
-	mux      *UniversalUDPMuxDefault
-	logger   logging.LeveledLogger
-	filterFn FilterFn
-	// TODO: reset cache on route changes
-	addrCache sync.Map
-	address   wgaddr.Address
+	mux     *UniversalUDPMuxDefault
+	logger  logging.LeveledLogger
+	address wgaddr.Address
 }
 
 // GetPacketConn returns the underlying PacketConn
@@ -132,65 +121,16 @@ func (u *UDPConn) GetPacketConn() net.PacketConn {
 }
 
 func (u *UDPConn) WriteTo(b []byte, addr net.Addr) (int, error) {
-	if u.filterFn == nil {
+	udpAddr, ok := addr.(*net.UDPAddr)
+	if !ok {
 		return u.PacketConn.WriteTo(b, addr)
 	}
-
-	if isRouted, found := u.addrCache.Load(addr.String()); found {
-		return u.handleCachedAddress(isRouted.(bool), b, addr)
-	}
-
-	return u.handleUncachedAddress(b, addr)
-}
-
-func (u *UDPConn) handleCachedAddress(isRouted bool, b []byte, addr net.Addr) (int, error) {
-	if isRouted {
-		return 0, fmt.Errorf("address %s is part of a routed network, refusing to write", addr)
-	}
-	return u.PacketConn.WriteTo(b, addr)
-}
-
-func (u *UDPConn) handleUncachedAddress(b []byte, addr net.Addr) (int, error) {
-	if err := u.performFilterCheck(addr); err != nil {
-		return 0, err
-	}
-	return u.PacketConn.WriteTo(b, addr)
-}
-
-func (u *UDPConn) performFilterCheck(addr net.Addr) error {
-	host, err := getHostFromAddr(addr)
-	if err != nil {
-		log.Errorf("Failed to get host from address %s: %v", addr, err)
-		return nil
-	}
-
-	a, err := netip.ParseAddr(host)
-	if err != nil {
-		log.Errorf("Failed to parse address %s: %v", addr, err)
-		return nil
-	}
-
-	if u.address.Network.Contains(a) {
+	dst := udpAddr.AddrPort().Addr().Unmap()
+	if (u.address.Network.IsValid() && u.address.Network.Contains(dst)) || (u.address.IPv6Net.IsValid() && u.address.IPv6Net.Contains(dst)) {
 		log.Warnf("address %s is part of the NetBird network %s, refusing to write", addr, u.address)
-		return fmt.Errorf("address %s is part of the NetBird network %s, refusing to write", addr, u.address)
+		return 0, fmt.Errorf("address %s is part of the NetBird network %s, refusing to write", addr, u.address)
 	}
-
-	if isRouted, prefix, err := u.filterFn(a); err != nil {
-		log.Errorf("Failed to check if address %s is routed: %v", addr, err)
-	} else {
-		u.addrCache.Store(addr.String(), isRouted)
-		if isRouted {
-			// Extra log, as the error only shows up with ICE logging enabled
-			log.Infof("address %s is part of routed network %s, refusing to write", addr, prefix)
-			return fmt.Errorf("address %s is part of routed network %s, refusing to write", addr, prefix)
-		}
-	}
-	return nil
-}
-
-func getHostFromAddr(addr net.Addr) (string, error) {
-	host, _, err := net.SplitHostPort(addr.String())
-	return host, err
+	return u.PacketConn.WriteTo(b, addr)
 }
 
 // GetSharedConn returns the shared udp conn
@@ -225,6 +165,13 @@ func (m *UniversalUDPMuxDefault) HandleSTUNMessage(msg *stun.Message, addr net.A
 		return nil
 	}
 
+	src := udpAddr.AddrPort().Addr().Unmap()
+	wg := m.params.WGAddress
+	if (wg.Network.IsValid() && wg.Network.Contains(src)) || (wg.IPv6Net.IsValid() && wg.IPv6Net.Contains(src)) {
+		log.Debugf("dropping STUN message from overlay source %s", udpAddr)
+		return nil
+	}
+
 	if m.isXORMappedResponse(msg, udpAddr.String()) {
 		err := m.handleXORMappedResponse(udpAddr, msg)
 		if err != nil {

client/iface/wgproxy/proxy_linux_test.go

@@ -66,7 +66,7 @@ func seedProxyForProxyCloseByRemoteConn() ([]proxyInstance, error) {
 	if err != nil {
 		return nil, err
 	}
-	iceBind := bind.NewICEBind(nil, nil, wgAddress, 1280)
+	iceBind := bind.NewICEBind(nil, wgAddress, 1280)
 	endpointAddress := &net.UDPAddr{
 		IP:   net.IPv4(10, 0, 0, 1),
 		Port: 1234,

client/iface/wgproxy/proxy_seed_test.go

@@ -22,7 +22,7 @@ func seedProxyForProxyCloseByRemoteConn() ([]proxyInstance, error) {
 	if err != nil {
 		return nil, err
 	}
-	iceBind := bind.NewICEBind(nil, nil, wgAddress, 1280)
+	iceBind := bind.NewICEBind(nil, wgAddress, 1280)
 	endpointAddress := &net.UDPAddr{
 		IP:   net.IPv4(10, 0, 0, 1),
 		Port: 1234,

client/installer.nsis

@@ -6,7 +6,7 @@
 !define DESCRIPTION "Connect your devices into a secure WireGuard-based overlay network with SSO, MFA, and granular access controls."
 !define INSTALLER_NAME "netbird-installer.exe"
 !define MAIN_APP_EXE "Netbird"
-!define ICON "ui\\build\\windows\\icon.ico"
+!define ICON "ui\\assets\\netbird.ico"
 !define BANNER "ui\\build\\banner.bmp"
 !define LICENSE_DATA "..\\LICENSE"
 
@@ -280,43 +280,6 @@ CreateShortCut "$SMPROGRAMS\${APP_NAME}.lnk" "$INSTDIR\${UI_APP_EXE}"
 CreateShortCut "$DESKTOP\${APP_NAME}.lnk" "$INSTDIR\${UI_APP_EXE}"
 SectionEnd
 
-# Install the Microsoft Edge WebView2 runtime if it isn't already present.
-# Macro adapted from Wails3's NSIS template (wails_tools.nsh): a registry
-# probe followed by a silent install of the embedded evergreen bootstrapper.
-# The MicrosoftEdgeWebview2Setup.exe payload is staged next to this script
-# by the sign-pipelines build step (`wails3 generate webview2bootstrapper`).
-!macro nb.webview2runtime
-    SetRegView 64
-    # Per-machine install marker — populated when the runtime ships with
-    # Edge or has been installed by an admin previously.
-    ReadRegStr $0 HKLM "SOFTWARE\WOW6432Node\Microsoft\EdgeUpdate\Clients\{F3017226-FE2A-4295-8BDF-00C3A9A7E4C5}" "pv"
-    ${If} $0 != ""
-        Goto webview2_ok
-    ${EndIf}
-    # Per-user fallback for HKCU installs.
-    ReadRegStr $0 HKCU "Software\Microsoft\EdgeUpdate\Clients\{F3017226-FE2A-4295-8BDF-00C3A9A7E4C5}" "pv"
-    ${If} $0 != ""
-        Goto webview2_ok
-    ${EndIf}
-
-    SetDetailsPrint both
-    DetailPrint "Installing: WebView2 Runtime"
-    SetDetailsPrint listonly
-
-    InitPluginsDir
-    CreateDirectory "$pluginsdir\webview2bootstrapper"
-    SetOutPath "$pluginsdir\webview2bootstrapper"
-    File "MicrosoftEdgeWebview2Setup.exe"
-    ExecWait '"$pluginsdir\webview2bootstrapper\MicrosoftEdgeWebview2Setup.exe" /silent /install'
-
-    SetDetailsPrint both
-    webview2_ok:
-!macroend
-
-Section -WebView2
-    !insertmacro nb.webview2runtime
-SectionEnd
-
 Section -Post
 ExecWait '"$INSTDIR\${MAIN_APP_EXE}" service install'
 ExecWait '"$INSTDIR\${MAIN_APP_EXE}" service start'
@@ -363,9 +326,9 @@ DetailPrint "Deleting application files..."
 Delete "$INSTDIR\${UI_APP_EXE}"
 Delete "$INSTDIR\${MAIN_APP_EXE}"
 Delete "$INSTDIR\wintun.dll"
-# Legacy: pre-Wails installs shipped opengl32.dll (Mesa3D for Fyne); remove
-# any leftover copy on uninstall so old upgrades don't leave it behind.
+!if ${ARCH} == "amd64"
 Delete "$INSTDIR\opengl32.dll"
+!endif
 DetailPrint "Removing application directory..."
 RmDir /r "$INSTDIR"
 

client/internal/auth/auth.go

@@ -3,7 +3,6 @@ package auth
 import (
 	"context"
 	"net/url"
-	"strings"
 	"sync"
 	"time"
 
@@ -22,25 +21,6 @@ import (
 	mgmProto "github.com/netbirdio/netbird/shared/management/proto"
 )
 
-// peerLoginExpiredMsg is the exact phrase the management server returns
-// when a previously SSO-enrolled peer's login has expired. Sourced from
-// shared/management/status/error.go (NewPeerLoginExpiredError). Matched
-// by substring so a future server-side rewording that keeps the phrase
-// still triggers the friendly fallback in Login().
-const peerLoginExpiredMsg = "peer login has expired"
-
-// errSetupKeyOnSSOExpiredPeer replaces the raw management error when the
-// user runs `netbird login -k <setup-key>` against a peer that was
-// originally enrolled via SSO. Wrapped in a PermissionDenied gRPC status
-// so callers' existing isPermissionDenied / isAuthError checks still
-// classify it correctly (early-exit from retry backoff, StatusNeedsLogin
-// in the server state machine).
-var errSetupKeyOnSSOExpiredPeer = status.Error(
-	codes.PermissionDenied,
-	"this peer was originally enrolled via SSO and its session has expired. "+
-		"Setup keys can only enrol new peers — run `netbird up` (interactive SSO) to re-login.",
-)
-
 // Auth manages authentication operations with the management server
 // It maintains a long-lived connection and automatically handles reconnection with backoff
 type Auth struct {
@@ -204,15 +184,6 @@ func (a *Auth) Login(ctx context.Context, setupKey string, jwtToken string) (err
 			log.Debugf("peer registration required")
 			_, err = a.registerPeer(client, ctx, setupKey, jwtToken, pubSSHKey)
 			if err != nil {
-				// The peer pub-key is already on file with the management
-				// server (originally enrolled via SSO) and the session has
-				// expired. The setup-key path can only enrol new peers, so
-				// retrying with -k will keep failing. Replace the raw mgm
-				// message with an actionable hint that tells the user to
-				// re-authenticate via SSO instead.
-				if setupKey != "" && jwtToken == "" && isPeerLoginExpired(err) {
-					err = errSetupKeyOnSSOExpiredPeer
-				}
 				isAuthError = isPermissionDenied(err)
 				return err
 			}
@@ -503,16 +474,3 @@ func isLoginNeeded(err error) bool {
 func isRegistrationNeeded(err error) bool {
 	return isPermissionDenied(err)
 }
-
-// isPeerLoginExpired reports whether err is the management server's
-// "peer login has expired" PermissionDenied response. Used by Login to
-// detect the case where the caller passed a setup-key but the peer is
-// actually an SSO-enrolled record whose session needs refreshing — the
-// setup-key path cannot help there.
-func isPeerLoginExpired(err error) bool {
-	if !isPermissionDenied(err) {
-		return false
-	}
-	s, _ := status.FromError(err)
-	return strings.Contains(s.Message(), peerLoginExpiredMsg)
-}

client/internal/auth/auth_test.go

@@ -1,80 +0,0 @@
-package auth
-
-import (
-	"errors"
-	"strings"
-	"testing"
-
-	"google.golang.org/grpc/codes"
-	"google.golang.org/grpc/status"
-)
-
-func TestIsPeerLoginExpired(t *testing.T) {
-	cases := []struct {
-		name string
-		err  error
-		want bool
-	}{
-		{
-			name: "nil",
-			err:  nil,
-			want: false,
-		},
-		{
-			name: "plain error (not a gRPC status)",
-			err:  errors.New("network read: connection reset"),
-			want: false,
-		},
-		{
-			name: "PermissionDenied with different message",
-			err:  status.Error(codes.PermissionDenied, "user is blocked"),
-			want: false,
-		},
-		{
-			name: "Unauthenticated with the expected phrase",
-			// Wrong status code — must still return false.
-			err:  status.Error(codes.Unauthenticated, "peer login has expired, please log in once more"),
-			want: false,
-		},
-		{
-			name: "exact server message",
-			err:  status.Error(codes.PermissionDenied, "peer login has expired, please log in once more"),
-			want: true,
-		},
-		{
-			name: "phrase as substring",
-			// Future-proofing: if mgm reworords but keeps the phrase,
-			// the friendly fallback must still kick in.
-			err:  status.Error(codes.PermissionDenied, "session refused: peer login has expired (account=foo)"),
-			want: true,
-		},
-	}
-
-	for _, tc := range cases {
-		t.Run(tc.name, func(t *testing.T) {
-			if got := isPeerLoginExpired(tc.err); got != tc.want {
-				t.Fatalf("isPeerLoginExpired(%v) = %v, want %v", tc.err, got, tc.want)
-			}
-		})
-	}
-}
-
-func TestErrSetupKeyOnSSOExpiredPeer(t *testing.T) {
-	// Sentinel must surface as PermissionDenied so the upstream
-	// isPermissionDenied / isAuthError checks classify it correctly
-	// (short-circuit retry backoff, set StatusNeedsLogin).
-	if !isPermissionDenied(errSetupKeyOnSSOExpiredPeer) {
-		t.Fatalf("errSetupKeyOnSSOExpiredPeer must be a PermissionDenied gRPC error")
-	}
-
-	// Message must actually mention SSO and `netbird up` so it is
-	// actionable for the end user. Loose substring checks keep the
-	// test resilient to copy edits.
-	s, _ := status.FromError(errSetupKeyOnSSOExpiredPeer)
-	msg := strings.ToLower(s.Message())
-	for _, want := range []string{"sso", "netbird up"} {
-		if !strings.Contains(msg, want) {
-			t.Errorf("sentinel message should contain %q, got %q", want, s.Message())
-		}
-	}
-}

client/internal/auth/pending_flow.go

@@ -1,89 +0,0 @@
-package auth
-
-import (
-	"context"
-	"sync"
-	"time"
-)
-
-// PendingFlow stores an in-progress OAuth flow between the RPC that
-// initiates it (returns the verification URI to the UI) and the RPC
-// that waits for the user to complete it. The flow handle, the
-// device-code info, and the absolute expiry are kept together so the
-// waiting RPC can validate the device code and reuse the same flow.
-//
-// PendingFlow is safe for concurrent use; callers must not access the
-// stored fields directly.
-type PendingFlow struct {
-	mu         sync.Mutex
-	flow       OAuthFlow
-	info       AuthFlowInfo
-	expiresAt  time.Time
-	waitCancel context.CancelFunc
-}
-
-// NewPendingFlow returns an empty PendingFlow ready to be populated by Set.
-func NewPendingFlow() *PendingFlow {
-	return &PendingFlow{}
-}
-
-// Set stores the flow and its authorization info, computing the absolute
-// expiry from info.ExpiresIn (seconds, as returned by the IdP).
-func (p *PendingFlow) Set(flow OAuthFlow, info AuthFlowInfo) {
-	p.mu.Lock()
-	defer p.mu.Unlock()
-	p.flow = flow
-	p.info = info
-	p.expiresAt = time.Now().Add(time.Duration(info.ExpiresIn) * time.Second)
-}
-
-// Get returns the stored flow, info, and whether a flow is currently
-// pending. Returns (nil, zero, false) after Clear or before Set.
-func (p *PendingFlow) Get() (OAuthFlow, AuthFlowInfo, bool) {
-	p.mu.Lock()
-	defer p.mu.Unlock()
-	if p.flow == nil {
-		return nil, AuthFlowInfo{}, false
-	}
-	return p.flow, p.info, true
-}
-
-// ExpiresAt returns the absolute expiry of the pending flow. Returns
-// the zero time when no flow is pending.
-func (p *PendingFlow) ExpiresAt() time.Time {
-	p.mu.Lock()
-	defer p.mu.Unlock()
-	return p.expiresAt
-}
-
-// SetWaitCancel records the cancel function for the goroutine currently
-// blocked in WaitToken so a new RequestAuth can preempt it.
-func (p *PendingFlow) SetWaitCancel(cancel context.CancelFunc) {
-	p.mu.Lock()
-	defer p.mu.Unlock()
-	p.waitCancel = cancel
-}
-
-// CancelWait invokes and clears the stored wait-cancel, if any. Safe to
-// call when no wait is in progress.
-func (p *PendingFlow) CancelWait() {
-	p.mu.Lock()
-	cancel := p.waitCancel
-	p.waitCancel = nil
-	p.mu.Unlock()
-	if cancel != nil {
-		cancel()
-	}
-}
-
-// Clear resets the pending flow to empty. Any stored wait-cancel is
-// dropped without being invoked — call CancelWait first if the waiting
-// goroutine must be stopped.
-func (p *PendingFlow) Clear() {
-	p.mu.Lock()
-	defer p.mu.Unlock()
-	p.flow = nil
-	p.info = AuthFlowInfo{}
-	p.expiresAt = time.Time{}
-	p.waitCancel = nil
-}

client/internal/auth/sessionwatch/event.go

@@ -1,74 +0,0 @@
-package sessionwatch
-
-import (
-	"strconv"
-	"time"
-)
-
-// internal event kinds are no longer exposed: the watcher drives the Sink
-// directly (NotifyStateChange on deadline change/clear, PublishEvent at
-// each warning lead). Tests use a mock Sink to observe what the watcher
-// emits.
-
-// Metadata keys attached by the daemon to session-warning SystemEvents.
-// The UI tray reads these to build a locale-aware notification without
-// relying on the daemon's locale-less UserMessage string, and to
-// disambiguate the T-WarningLead notification from the T-FinalWarningLead
-// fallback that auto-opens the SessionAboutToExpire dialog.
-const (
-	// MetaSessionWarning is set to "true" on both warning events (T-10 and
-	// T-2) so the UI can detect a session-warning SystemEvent without
-	// matching on the message text. Use MetaSessionFinal to distinguish
-	// the two.
-	MetaSessionWarning = "session_warning"
-	// MetaSessionFinal is set to "true" on the T-FinalWarningLead event
-	// only. Consumers that need to auto-open the SessionAboutToExpire
-	// dialog gate on this; T-WarningLead events leave the field unset.
-	MetaSessionFinal = "session_final_warning"
-	// MetaSessionExpiresAt carries the absolute UTC deadline encoded with
-	// FormatExpiresAt; consumers must decode with ParseExpiresAt so a
-	// future format change stays a single edit.
-	MetaSessionExpiresAt = "session_expires_at"
-	// MetaSessionLeadMinutes carries the lead in whole minutes (WarningLead
-	// for the T-10 event, FinalWarningLead for the T-2 event) so the UI
-	// can show "expires in ~N minutes" without hardcoding either constant.
-	MetaSessionLeadMinutes = "lead_minutes"
-)
-
-// expiresAtLayout is the wire format used for MetaSessionExpiresAt.
-// Producer and consumers both go through FormatExpiresAt/ParseExpiresAt
-// so this layout stays a single source of truth.
-const expiresAtLayout = time.RFC3339
-
-// FormatExpiresAt encodes a deadline for MetaSessionExpiresAt. Always
-// emits UTC so a consumer in another timezone reads the same wall-clock
-// deadline.
-func FormatExpiresAt(t time.Time) string {
-	return t.UTC().Format(expiresAtLayout)
-}
-
-// ParseExpiresAt decodes the MetaSessionExpiresAt value back to a UTC
-// time. Returns an error when the field is empty or malformed; the
-// caller decides whether to fall back (zero value) or propagate.
-func ParseExpiresAt(s string) (time.Time, error) {
-	t, err := time.Parse(expiresAtLayout, s)
-	if err != nil {
-		return time.Time{}, err
-	}
-	return t.UTC(), nil
-}
-
-// FormatLeadMinutes encodes a lead duration for MetaSessionLeadMinutes
-// as the integer count of whole minutes. Sub-minute residuals are
-// truncated — the field is informational ("expires in ~N minutes") and
-// fractional minutes don't change what the UI displays.
-func FormatLeadMinutes(d time.Duration) string {
-	return strconv.Itoa(int(d / time.Minute))
-}
-
-// ParseLeadMinutes decodes a MetaSessionLeadMinutes value. Returns 0
-// and the parse error for malformed input; consumers that prefer a
-// silent fallback can simply ignore the error.
-func ParseLeadMinutes(s string) (int, error) {
-	return strconv.Atoi(s)
-}

client/internal/auth/sessionwatch/watcher.go

@@ -1,387 +0,0 @@
-// Package sessionwatch tracks the SSO session expiry deadline that the
-// management server publishes via LoginResponse / SyncResponse and fires
-// two warning events at fixed lead times before expiry: an interactive
-// T-WarningLead notification and a dismiss-gated T-FinalWarningLead
-// fallback dialog.
-//
-// The watcher is idempotent: Update may be called as often as the network
-// map snapshots arrive. Repeating the same deadline is a no-op; a new
-// deadline reschedules the timers and arms a fresh warning cycle.
-//
-// Warning firing is edge-detected. Each unique deadline value fires each
-// warning callback at most once.
-package sessionwatch
-
-import (
-	"errors"
-	"fmt"
-	"sync"
-	"time"
-
-	log "github.com/sirupsen/logrus"
-
-	cProto "github.com/netbirdio/netbird/client/proto"
-)
-
-const (
-	// Skew tolerates a small clock difference between the management
-	// server and this peer before treating a deadline as "in the past".
-	// Slightly above typical NTP drift; tight enough that the UI doesn't
-	// paint a stale expiry as if it were valid.
-	Skew = 30 * time.Second
-
-	// maxDeadlineHorizon caps how far in the future an accepted deadline
-	// can sit. A timestamp beyond this is almost certainly a protocol
-	// glitch, and silently arming a 100-year timer would hide the bug.
-	maxDeadlineHorizon = 10 * 365 * 24 * time.Hour
-
-	// WarningLead is how far before expiry the first (interactive)
-	// warning fires. Drives the T-10 OS notification with
-	// Extend/Dismiss actions.
-	WarningLead = 10 * time.Minute
-
-	// FinalWarningLead is how far before expiry the fallback final
-	// warning fires. Drives the auto-opened SessionAboutToExpire dialog,
-	// but only when the user has not dismissed the T-WarningLead warning
-	// for the same deadline. Must be strictly less than WarningLead.
-	FinalWarningLead = 2 * time.Minute
-)
-
-var (
-	// ErrDeadlineBeforeEpoch is returned by Update when the supplied
-	// deadline pre-dates 1970-01-01.
-	ErrDeadlineBeforeEpoch = errors.New("session deadline before unix epoch")
-
-	// ErrDeadlineTooFarFuture is returned by Update when the supplied
-	// deadline is more than maxDeadlineHorizon in the future.
-	ErrDeadlineTooFarFuture = errors.New("session deadline too far in the future")
-
-	// ErrDeadlineInPast is returned by Update when the supplied deadline
-	// is more than Skew in the past.
-	ErrDeadlineInPast = errors.New("session deadline in the past")
-)
-
-// StatusRecorder is the side-effect surface the watcher drives on every
-// state transition. Production wires this to peer.Status (SetSessionExpiresAt
-// for deadline change/clear, PublishEvent for the two warnings); tests pass
-// a fake recorder so the same surface is observable without an engine.
-//
-// The watcher is the single owner of the deadline propagated to the
-// recorder: every set, clear, sanity-check rejection and Close routes the
-// value through SetSessionExpiresAt, so the SubscribeStatus snapshot the UI
-// reads can never drift from the watcher's timer state. (SetSessionExpiresAt
-// fans out its own state-change notification, so no separate notify is
-// needed.) The recorder is server-scoped and outlives this engine-scoped
-// watcher — without the Close-time clear a teardown (Down, or the Down+Up of
-// a profile switch) would leave the next session showing the previous one's
-// stale "expires in" value.
-//
-// PublishEvent's signature mirrors peer.Status.PublishEvent: the watcher
-// composes the metadata internally so the wire format (MetaSession*) is
-// owned by sessionwatch, not the caller.
-type StatusRecorder interface {
-	SetSessionExpiresAt(deadline time.Time)
-	PublishEvent(
-		severity cProto.SystemEvent_Severity,
-		category cProto.SystemEvent_Category,
-		message string,
-		userMessage string,
-		metadata map[string]string,
-	)
-}
-
-// Watcher observes the latest session deadline and fires two warnings
-// before it expires: the interactive T-WarningLead notification, and the
-// fallback T-FinalWarningLead dialog (suppressed when the user dismissed
-// the first one for the same deadline). Safe for concurrent use.
-type Watcher struct {
-	lead      time.Duration
-	finalLead time.Duration
-
-	mu           sync.Mutex
-	current      time.Time
-	timer        *time.Timer
-	finalTimer   *time.Timer
-	firedAt      time.Time // deadline value the T-WarningLead callback last fired against
-	finalFiredAt time.Time // deadline value the T-FinalWarningLead callback last fired against
-	dismissedAt  time.Time // deadline value the user dismissed via Dismiss(); gates fireFinal
-	closed       bool
-	recorder     StatusRecorder
-}
-
-// New returns a watcher with the package defaults WarningLead and
-// FinalWarningLead. Pass nil for recorder to silence side effects (handy
-// in unit tests that exercise sanity checks without observing the publish
-// path).
-func New(recorder StatusRecorder) *Watcher {
-	return NewWithLeads(WarningLead, FinalWarningLead, recorder)
-}
-
-// NewWithLeads returns a watcher with custom lead times. Useful for tests.
-// final must be strictly less than lead; otherwise both timers fire in the
-// wrong order or simultaneously and the UI flow breaks. A zero final lead
-// disables the final-warning timer entirely (see armTimerLocked) so a
-// millisecond-scale deadline doesn't flush both timers in one tick.
-func NewWithLeads(lead, final time.Duration, recorder StatusRecorder) *Watcher {
-	return &Watcher{
-		lead:      lead,
-		finalLead: final,
-		recorder:  recorder,
-	}
-}
-
-// Update sets the latest deadline. Pass the zero time to clear (e.g. when
-// a Sync push from the server omits the field because login expiration
-// was disabled).
-//
-// Same-value updates are no-ops. A different non-zero value cancels any
-// pending timer, resets the "already fired" guard, and arms a new one.
-//
-// Returns one of the sentinel Err* values when the deadline fails the
-// sanity checks (pre-epoch, far future, or in the past beyond Skew).
-// In every error case the watcher first clears its state so it stays
-// consistent with what the caller will push into its other sinks (e.g.
-// applySessionDeadline forces a zero deadline into the status recorder
-// after a non-nil error).
-func (w *Watcher) Update(deadline time.Time) error {
-	w.mu.Lock()
-	if w.closed {
-		w.mu.Unlock()
-		return nil
-	}
-
-	if deadline.IsZero() {
-		w.clearLocked()
-		return nil
-	}
-
-	now := time.Now()
-	switch {
-	case deadline.Before(time.Unix(0, 0)):
-		w.clearLocked()
-		return fmt.Errorf("%w: %v", ErrDeadlineBeforeEpoch, deadline)
-	case deadline.After(now.Add(maxDeadlineHorizon)):
-		w.clearLocked()
-		return fmt.Errorf("%w: %v", ErrDeadlineTooFarFuture, deadline)
-	case deadline.Before(now.Add(-Skew)):
-		w.clearLocked()
-		return fmt.Errorf("%w: %v (now=%v)", ErrDeadlineInPast, deadline, now)
-	}
-
-	if deadline.Equal(w.current) {
-		w.mu.Unlock()
-		return nil
-	}
-
-	w.stopTimerLocked()
-	w.current = deadline
-	// Reset every per-deadline guard so a refreshed deadline arms a fresh
-	// warning cycle: both edge triggers and the user Dismiss decision
-	// (the user agreed to the old deadline expiring; a new deadline
-	// restarts the contract).
-	w.firedAt = time.Time{}
-	w.finalFiredAt = time.Time{}
-	w.dismissedAt = time.Time{}
-
-	w.armTimerLocked(deadline)
-	recorder := w.recorder
-	w.mu.Unlock()
-	if recorder != nil {
-		recorder.SetSessionExpiresAt(deadline)
-	}
-	log.Infof("auth session deadline set to: %s (in %s)", deadline.Format(time.RFC3339), time.Until(deadline).Round(time.Second))
-	return nil
-}
-
-// Deadline returns the most recently observed deadline. Zero when no
-// deadline is currently tracked.
-func (w *Watcher) Deadline() time.Time {
-	w.mu.Lock()
-	defer w.mu.Unlock()
-	return w.current
-}
-
-// Dismiss records the user's "Dismiss" action against the current deadline
-// and suppresses the upcoming final-warning callback for that deadline.
-// Idempotent: repeated calls are no-ops. A subsequent Update with a fresh
-// deadline resets the dismissal so the final-warning cycle re-arms.
-//
-// No-op when the watcher holds no deadline or has been closed.
-func (w *Watcher) Dismiss() {
-	w.mu.Lock()
-	defer w.mu.Unlock()
-	if w.closed || w.current.IsZero() {
-		return
-	}
-	if w.dismissedAt.Equal(w.current) {
-		return
-	}
-	w.dismissedAt = w.current
-	// Cancel the armed final-warning timer eagerly. fireFinal would also
-	// gate on dismissedAt, but stopping the timer avoids a wakeup with
-	// nothing to do and makes the intent visible.
-	if w.finalTimer != nil {
-		w.finalTimer.Stop()
-		w.finalTimer = nil
-	}
-	log.Infof("auth session final-warning dismissed for deadline %s", w.current.Format(time.RFC3339))
-}
-
-// Close stops any pending timer and drops the deadline on the status
-// recorder. Update calls after Close are ignored. Clearing the recorder
-// here is what keeps a teardown (Down, or the Down+Up of a profile switch)
-// from leaving the next session showing this one's stale "expires in"
-// value — the recorder is server-scoped and outlives this engine-scoped
-// watcher, so nothing else drops the anchor on teardown.
-func (w *Watcher) Close() {
-	w.mu.Lock()
-	if w.closed {
-		w.mu.Unlock()
-		return
-	}
-	w.closed = true
-	w.stopTimerLocked()
-	hadDeadline := !w.current.IsZero()
-	w.current = time.Time{}
-	w.firedAt = time.Time{}
-	w.finalFiredAt = time.Time{}
-	w.dismissedAt = time.Time{}
-	recorder := w.recorder
-	w.mu.Unlock()
-	if recorder != nil && hadDeadline {
-		recorder.SetSessionExpiresAt(time.Time{})
-	}
-}
-
-// clearLocked drops the tracked deadline and notifies the recorder so
-// downstream consumers (SubscribeStatus stream, UI) drop their anchor.
-// The caller must hold w.mu; this helper releases it before invoking
-// the recorder.
-func (w *Watcher) clearLocked() {
-	if w.current.IsZero() {
-		w.mu.Unlock()
-		return
-	}
-	w.stopTimerLocked()
-	w.current = time.Time{}
-	w.firedAt = time.Time{}
-	w.finalFiredAt = time.Time{}
-	w.dismissedAt = time.Time{}
-	recorder := w.recorder
-	w.mu.Unlock()
-	if recorder != nil {
-		recorder.SetSessionExpiresAt(time.Time{})
-	}
-	log.Infof("auth session deadline cleared")
-}
-
-func (w *Watcher) stopTimerLocked() {
-	if w.timer != nil {
-		w.timer.Stop()
-		w.timer = nil
-	}
-	if w.finalTimer != nil {
-		w.finalTimer.Stop()
-		w.finalTimer = nil
-	}
-}
-
-func (w *Watcher) armTimerLocked(deadline time.Time) {
-	w.timer = armOneShotLocked(deadline.Add(-w.lead), func() { w.fire(deadline) })
-	// finalLead <= 0 disables the final-warning timer entirely. Used by
-	// tests that predate the final-warning fallback so a millisecond-scale
-	// deadline does not flush both timers at once.
-	if w.finalLead > 0 {
-		w.finalTimer = armOneShotLocked(deadline.Add(-w.finalLead), func() { w.fireFinal(deadline) })
-	}
-}
-
-func (w *Watcher) fire(armedFor time.Time) {
-	w.mu.Lock()
-	if w.closed || !w.current.Equal(armedFor) {
-		// Deadline moved while we were waiting (e.g. a successful extend).
-		// The reschedule path armed a fresh timer; this one is stale.
-		w.mu.Unlock()
-		return
-	}
-	if !w.firedAt.IsZero() && w.firedAt.Equal(armedFor) {
-		w.mu.Unlock()
-		return
-	}
-	w.firedAt = armedFor
-	recorder := w.recorder
-	w.mu.Unlock()
-	if recorder == nil {
-		return
-	}
-	log.Infof("auth session expiry soon warning fired")
-	publishWarning(recorder, armedFor, false)
-}
-
-// fireFinal mirrors fire for the T-FinalWarningLead timer with an extra
-// dismiss-gate: if the user dismissed the T-WarningLead notification for
-// this deadline, the final warning is suppressed entirely.
-func (w *Watcher) fireFinal(armedFor time.Time) {
-	w.mu.Lock()
-	if w.closed || !w.current.Equal(armedFor) {
-		w.mu.Unlock()
-		return
-	}
-	if !w.finalFiredAt.IsZero() && w.finalFiredAt.Equal(armedFor) {
-		w.mu.Unlock()
-		return
-	}
-	if w.dismissedAt.Equal(armedFor) {
-		w.mu.Unlock()
-		log.Infof("auth session final-warning skipped (dismissed by user)")
-		return
-	}
-	w.finalFiredAt = armedFor
-	recorder := w.recorder
-	w.mu.Unlock()
-	if recorder == nil {
-		return
-	}
-	log.Infof("auth session final-warning fired")
-	publishWarning(recorder, armedFor, true)
-}
-
-// armOneShotLocked schedules cb at fireAt. When fireAt is already in the
-// past it dispatches on the next scheduler tick so a state-change recorder
-// notification (invoked after w.mu is released) lands first. Caller must
-// hold w.mu.
-func armOneShotLocked(fireAt time.Time, cb func()) *time.Timer {
-	delay := time.Until(fireAt)
-	if delay <= 0 {
-		return time.AfterFunc(0, cb)
-	}
-	return time.AfterFunc(delay, cb)
-}
-
-// publishWarning composes the SystemEvent for a watcher-fired warning and
-// pushes it through the recorder. Severity is CRITICAL on both — bypassing
-// the user's Notifications toggle is deliberate: missing the warning
-// window forces the post-mortem SessionExpired flow (tunnel torn down,
-// lock icon, manual re-login), which is the UX we are trying to avoid.
-func publishWarning(recorder StatusRecorder, deadline time.Time, final bool) {
-	lead := WarningLead
-	message := "session expiry warning"
-	meta := map[string]string{
-		MetaSessionWarning:   "true",
-		MetaSessionExpiresAt: FormatExpiresAt(deadline),
-	}
-	if final {
-		lead = FinalWarningLead
-		message = "session expiry final warning"
-		meta[MetaSessionFinal] = "true"
-	}
-	meta[MetaSessionLeadMinutes] = FormatLeadMinutes(lead)
-
-	recorder.PublishEvent(
-		cProto.SystemEvent_CRITICAL,
-		cProto.SystemEvent_AUTHENTICATION,
-		message,
-		"",
-		meta,
-	)
-}

client/internal/auth/sessionwatch/watcher_test.go

@@ -1,519 +0,0 @@
-package sessionwatch
-
-import (
-	"errors"
-	"sync"
-	"testing"
-	"time"
-
-	cProto "github.com/netbirdio/netbird/client/proto"
-)
-
-// fakeRecorder satisfies StatusRecorder and records every call so tests
-// can observe what the watcher emits. SetSessionExpiresAt and PublishEvent
-// land in the same ordered events slice (with the Kind distinguishing
-// them) so tests that care about ordering still work. lastDeadline holds
-// the most recent value passed to SetSessionExpiresAt so tests can assert
-// the recorder ended up cleared/set as expected.
-type fakeRecorder struct {
-	mu           sync.Mutex
-	events       []event
-	lastDeadline time.Time
-}
-
-type eventKind int
-
-const (
-	stateChange eventKind = iota
-	publish
-)
-
-type event struct {
-	kind eventKind
-	// Set only for publish events.
-	severity cProto.SystemEvent_Severity
-	category cProto.SystemEvent_Category
-	message  string
-	meta     map[string]string
-}
-
-// SetSessionExpiresAt mirrors peer.Status: a same-value write is a no-op,
-// a real change records the new value and fans out a state-change (the
-// production recorder calls notifyStateChange internally). The baseline
-// is the zero time, so an initial clear before any deadline is set emits
-// nothing — matching the real recorder.
-func (r *fakeRecorder) SetSessionExpiresAt(deadline time.Time) {
-	r.mu.Lock()
-	defer r.mu.Unlock()
-	if r.lastDeadline.Equal(deadline) {
-		return
-	}
-	r.lastDeadline = deadline
-	r.events = append(r.events, event{kind: stateChange})
-}
-
-func (r *fakeRecorder) deadline() time.Time {
-	r.mu.Lock()
-	defer r.mu.Unlock()
-	return r.lastDeadline
-}
-
-func (r *fakeRecorder) PublishEvent(
-	severity cProto.SystemEvent_Severity,
-	category cProto.SystemEvent_Category,
-	message string,
-	_ string,
-	metadata map[string]string,
-) {
-	r.mu.Lock()
-	defer r.mu.Unlock()
-	r.events = append(r.events, event{
-		kind:     publish,
-		severity: severity,
-		category: category,
-		message:  message,
-		meta:     metadata,
-	})
-}
-
-func (r *fakeRecorder) snapshot() []event {
-	r.mu.Lock()
-	defer r.mu.Unlock()
-	out := make([]event, len(r.events))
-	copy(out, r.events)
-	return out
-}
-
-func (e event) isFinalWarning() bool {
-	return e.kind == publish && e.meta[MetaSessionFinal] == "true"
-}
-
-func (e event) isWarning() bool {
-	return e.kind == publish && e.meta[MetaSessionWarning] == "true" && e.meta[MetaSessionFinal] != "true"
-}
-
-func countWhere(events []event, pred func(event) bool) int {
-	n := 0
-	for _, e := range events {
-		if pred(e) {
-			n++
-		}
-	}
-	return n
-}
-
-func waitForEvents(t *testing.T, r *fakeRecorder, want int) []event {
-	t.Helper()
-	deadline := time.Now().Add(500 * time.Millisecond)
-	for time.Now().Before(deadline) {
-		if got := r.snapshot(); len(got) >= want {
-			return got
-		}
-		time.Sleep(5 * time.Millisecond)
-	}
-	got := r.snapshot()
-	t.Fatalf("timed out waiting for %d events, got %d: %+v", want, len(got), got)
-	return nil
-}
-
-// newWatcher builds a watcher with the final timer disabled (finalLead=0),
-// matching the lead-only behaviour the pre-final-warning tests assume.
-func newWatcher(lead time.Duration, r *fakeRecorder) *Watcher {
-	return NewWithLeads(lead, 0, r)
-}
-
-func TestUpdateZeroBeforeAnythingIsNoop(t *testing.T) {
-	r := &fakeRecorder{}
-	w := newWatcher(50*time.Millisecond, r)
-	defer w.Close()
-
-	_ = w.Update(time.Time{})
-
-	if got := r.snapshot(); len(got) != 0 {
-		t.Fatalf("expected no events on initial zero, got %+v", got)
-	}
-}
-
-func TestUpdateNonZeroFiresStateChange(t *testing.T) {
-	r := &fakeRecorder{}
-	w := newWatcher(50*time.Millisecond, r)
-	defer w.Close()
-
-	d := time.Now().Add(time.Hour)
-	_ = w.Update(d)
-
-	events := waitForEvents(t, r, 1)
-	if events[0].kind != stateChange {
-		t.Fatalf("expected stateChange, got %+v", events[0])
-	}
-	if !w.Deadline().Equal(d) {
-		t.Fatalf("deadline mismatch: %v vs %v", w.Deadline(), d)
-	}
-}
-
-func TestSameDeadlineIsNoop(t *testing.T) {
-	r := &fakeRecorder{}
-	w := newWatcher(50*time.Millisecond, r)
-	defer w.Close()
-
-	d := time.Now().Add(time.Hour)
-	_ = w.Update(d)
-	_ = w.Update(d)
-	_ = w.Update(d)
-
-	events := waitForEvents(t, r, 1)
-	if len(events) != 1 {
-		t.Fatalf("expected exactly 1 event for repeated same deadline, got %d: %+v", len(events), events)
-	}
-}
-
-func TestWarningFiresOnceWithinLeadWindow(t *testing.T) {
-	r := &fakeRecorder{}
-	lead := 50 * time.Millisecond
-	w := newWatcher(lead, r)
-	defer w.Close()
-
-	// Deadline 80ms out — warning should fire after ~30ms.
-	d := time.Now().Add(80 * time.Millisecond)
-	_ = w.Update(d)
-
-	events := waitForEvents(t, r, 2)
-	if events[0].kind != stateChange {
-		t.Fatalf("event[0] should be stateChange, got %+v", events[0])
-	}
-	if !events[1].isWarning() {
-		t.Fatalf("event[1] should be a warning publish, got %+v", events[1])
-	}
-}
-
-func TestWarningFiresImmediatelyWhenAlreadyInsideWindow(t *testing.T) {
-	r := &fakeRecorder{}
-	w := newWatcher(time.Hour, r) // lead > delta => fire immediately
-	defer w.Close()
-
-	d := time.Now().Add(10 * time.Millisecond)
-	_ = w.Update(d)
-
-	events := waitForEvents(t, r, 2)
-	if !events[1].isWarning() {
-		t.Fatalf("expected immediate warning publish, got %+v", events[1])
-	}
-}
-
-func TestNewDeadlineCancelsPriorTimer(t *testing.T) {
-	r := &fakeRecorder{}
-	lead := 50 * time.Millisecond
-	w := newWatcher(lead, r)
-	defer w.Close()
-
-	first := time.Now().Add(80 * time.Millisecond) // would fire warning ~30ms in
-	_ = w.Update(first)
-
-	// Replace with a far-future deadline before the warning fires.
-	time.Sleep(5 * time.Millisecond)
-	second := time.Now().Add(time.Hour)
-	_ = w.Update(second)
-
-	// Wait past when first's warning would have fired.
-	time.Sleep(80 * time.Millisecond)
-
-	if n := countWhere(r.snapshot(), event.isWarning); n != 0 {
-		t.Fatalf("warning fired for cancelled deadline: %+v", r.snapshot())
-	}
-}
-
-func TestRefreshAfterFireArmsNewWarning(t *testing.T) {
-	r := &fakeRecorder{}
-	lead := 30 * time.Millisecond
-	w := newWatcher(lead, r)
-	defer w.Close()
-
-	first := time.Now().Add(50 * time.Millisecond)
-	_ = w.Update(first)
-
-	// Wait for stateChange + warning of the first cycle.
-	waitForEvents(t, r, 2)
-
-	// Simulate a successful extend: brand new deadline.
-	second := time.Now().Add(60 * time.Millisecond)
-	_ = w.Update(second)
-
-	// 4 events total: stateChange, warning (first), stateChange, warning (second).
-	events := waitForEvents(t, r, 4)
-	if events[2].kind != stateChange {
-		t.Fatalf("event[2] should be stateChange for the new deadline, got %+v", events[2])
-	}
-	if !events[3].isWarning() {
-		t.Fatalf("event[3] should be a warning publish for the new deadline, got %+v", events[3])
-	}
-}
-
-func TestUpdateZeroAfterNonZeroClearsState(t *testing.T) {
-	r := &fakeRecorder{}
-	w := newWatcher(time.Hour, r)
-	defer w.Close()
-
-	d := time.Now().Add(2 * time.Hour)
-	_ = w.Update(d)
-	waitForEvents(t, r, 1)
-
-	_ = w.Update(time.Time{})
-
-	events := waitForEvents(t, r, 2)
-	if events[1].kind != stateChange {
-		t.Fatalf("expected stateChange on clear, got %+v", events[1])
-	}
-	if !w.Deadline().IsZero() {
-		t.Fatalf("Deadline should be zero after clear")
-	}
-}
-
-func TestUpdateRejectsBeforeEpoch(t *testing.T) {
-	r := &fakeRecorder{}
-	w := newWatcher(50*time.Millisecond, r)
-	defer w.Close()
-
-	good := time.Now().Add(time.Hour)
-	if err := w.Update(good); err != nil {
-		t.Fatalf("seed Update: %v", err)
-	}
-
-	err := w.Update(time.Unix(-100, 0))
-	if !errors.Is(err, ErrDeadlineBeforeEpoch) {
-		t.Fatalf("want ErrDeadlineBeforeEpoch, got %v", err)
-	}
-	if !w.Deadline().IsZero() {
-		t.Fatalf("rejected pre-epoch update must clear deadline; got %v", w.Deadline())
-	}
-}
-
-func TestUpdateRejectsTooFarFuture(t *testing.T) {
-	r := &fakeRecorder{}
-	w := newWatcher(50*time.Millisecond, r)
-	defer w.Close()
-
-	good := time.Now().Add(time.Hour)
-	if err := w.Update(good); err != nil {
-		t.Fatalf("seed Update: %v", err)
-	}
-
-	err := w.Update(time.Now().Add(50 * 365 * 24 * time.Hour))
-	if !errors.Is(err, ErrDeadlineTooFarFuture) {
-		t.Fatalf("want ErrDeadlineTooFarFuture, got %v", err)
-	}
-	if !w.Deadline().IsZero() {
-		t.Fatalf("rejected far-future update must clear deadline; got %v", w.Deadline())
-	}
-}
-
-func TestUpdateInPastClearsDeadline(t *testing.T) {
-	r := &fakeRecorder{}
-	w := newWatcher(50*time.Millisecond, r)
-	defer w.Close()
-
-	good := time.Now().Add(time.Hour)
-	if err := w.Update(good); err != nil {
-		t.Fatalf("seed Update: %v", err)
-	}
-	// Drain the stateChange from the seed.
-	waitForEvents(t, r, 1)
-
-	err := w.Update(time.Now().Add(-1 * time.Hour))
-	if !errors.Is(err, ErrDeadlineInPast) {
-		t.Fatalf("want ErrDeadlineInPast, got %v", err)
-	}
-	if !w.Deadline().IsZero() {
-		t.Fatalf("in-past update must clear the deadline, got %v", w.Deadline())
-	}
-	events := waitForEvents(t, r, 2)
-	if events[1].kind != stateChange {
-		t.Fatalf("expected stateChange on clear, got %+v", events[1])
-	}
-}
-
-func TestUpdateWithinSkewAccepted(t *testing.T) {
-	r := &fakeRecorder{}
-	w := newWatcher(50*time.Millisecond, r)
-	defer w.Close()
-
-	// 5 seconds in the past is within the 30s Skew tolerance — accept it.
-	d := time.Now().Add(-5 * time.Second)
-	if err := w.Update(d); err != nil {
-		t.Fatalf("within-skew Update should succeed, got %v", err)
-	}
-	if !w.Deadline().Equal(d) {
-		t.Fatalf("expected deadline to be applied, got %v want %v", w.Deadline(), d)
-	}
-}
-
-func TestCloseSilencesUpdates(t *testing.T) {
-	r := &fakeRecorder{}
-	w := newWatcher(50*time.Millisecond, r)
-	w.Close()
-
-	_ = w.Update(time.Now().Add(time.Hour))
-
-	time.Sleep(20 * time.Millisecond)
-	if got := r.snapshot(); len(got) != 0 {
-		t.Fatalf("expected no events after Close, got %+v", got)
-	}
-}
-
-// TestCloseClearsRecorderDeadline pins the profile-switch fix: a watcher
-// holding a live deadline must zero the recorder on Close so the next
-// engine's watcher (and the UI reading the shared server-scoped recorder)
-// doesn't start out showing the previous session's stale "expires in".
-func TestCloseClearsRecorderDeadline(t *testing.T) {
-	r := &fakeRecorder{}
-	w := newWatcher(time.Hour, r)
-
-	d := time.Now().Add(2 * time.Hour)
-	if err := w.Update(d); err != nil {
-		t.Fatalf("seed Update: %v", err)
-	}
-	if got := r.deadline(); !got.Equal(d) {
-		t.Fatalf("recorder deadline after Update = %v, want %v", got, d)
-	}
-
-	w.Close()
-
-	if got := r.deadline(); !got.IsZero() {
-		t.Fatalf("recorder deadline after Close = %v, want zero", got)
-	}
-}
-
-// TestCloseWithoutDeadlineLeavesRecorderUntouched guards the symmetric
-// case: closing a watcher that never held a deadline must not emit a
-// redundant clear (the recorder may legitimately hold a value written by
-// some other path; the watcher only owns what it set).
-func TestCloseWithoutDeadlineLeavesRecorderUntouched(t *testing.T) {
-	r := &fakeRecorder{}
-	w := newWatcher(time.Hour, r)
-
-	w.Close()
-
-	if got := r.snapshot(); len(got) != 0 {
-		t.Fatalf("expected no events from Close on an empty watcher, got %+v", got)
-	}
-}
-
-func TestFinalWarningFiresAfterRegularWarning(t *testing.T) {
-	r := &fakeRecorder{}
-	// Warning fires at deadline-80ms, final at deadline-30ms.
-	w := NewWithLeads(80*time.Millisecond, 30*time.Millisecond, r)
-	defer w.Close()
-
-	d := time.Now().Add(100 * time.Millisecond)
-	_ = w.Update(d)
-
-	// Expect stateChange + warning + final-warning.
-	events := waitForEvents(t, r, 3)
-
-	if countWhere(events, func(e event) bool { return e.kind == stateChange }) != 1 {
-		t.Fatalf("expected exactly 1 stateChange, got %+v", events)
-	}
-	if countWhere(events, event.isWarning) != 1 {
-		t.Fatalf("expected exactly 1 warning publish, got %+v", events)
-	}
-	if countWhere(events, event.isFinalWarning) != 1 {
-		t.Fatalf("expected exactly 1 final-warning publish, got %+v", events)
-	}
-
-	// Warning must precede final (same deadline, longer lead fires first).
-	var wIdx, fIdx int
-	for i, e := range events {
-		switch {
-		case e.isWarning():
-			wIdx = i
-		case e.isFinalWarning():
-			fIdx = i
-		}
-	}
-	if wIdx > fIdx {
-		t.Fatalf("warning must publish before final-warning, got order %+v", events)
-	}
-}
-
-func TestDismissSuppressesFinalWarning(t *testing.T) {
-	r := &fakeRecorder{}
-	w := NewWithLeads(80*time.Millisecond, 30*time.Millisecond, r)
-	defer w.Close()
-
-	d := time.Now().Add(100 * time.Millisecond)
-	_ = w.Update(d)
-
-	// Wait for the warning publish so we know we're inside the warning
-	// window, then dismiss before the final timer would fire.
-	deadline := time.Now().Add(500 * time.Millisecond)
-	for time.Now().Before(deadline) {
-		if countWhere(r.snapshot(), event.isWarning) >= 1 {
-			break
-		}
-		time.Sleep(2 * time.Millisecond)
-	}
-	if countWhere(r.snapshot(), event.isWarning) < 1 {
-		t.Fatalf("warning did not publish in time, events=%+v", r.snapshot())
-	}
-
-	w.Dismiss()
-
-	// Now wait past when the final would have fired.
-	time.Sleep(120 * time.Millisecond)
-
-	if n := countWhere(r.snapshot(), event.isFinalWarning); n != 0 {
-		t.Fatalf("final-warning published after Dismiss(), events=%+v", r.snapshot())
-	}
-}
-
-func TestDismissResetByNewDeadline(t *testing.T) {
-	r := &fakeRecorder{}
-	w := NewWithLeads(80*time.Millisecond, 30*time.Millisecond, r)
-	defer w.Close()
-
-	first := time.Now().Add(100 * time.Millisecond)
-	_ = w.Update(first)
-
-	// Dismiss against the first deadline.
-	w.Dismiss()
-
-	// Replace with a fresh deadline before the first's timers complete.
-	time.Sleep(10 * time.Millisecond)
-	second := time.Now().Add(100 * time.Millisecond)
-	_ = w.Update(second)
-
-	// The second cycle must publish a final-warning (the dismiss state
-	// did not carry over).
-	deadline := time.Now().Add(500 * time.Millisecond)
-	for time.Now().Before(deadline) {
-		if countWhere(r.snapshot(), event.isFinalWarning) >= 1 {
-			break
-		}
-		time.Sleep(5 * time.Millisecond)
-	}
-	if countWhere(r.snapshot(), event.isFinalWarning) < 1 {
-		t.Fatalf("final-warning did not publish on fresh deadline after Dismiss reset, events=%+v", r.snapshot())
-	}
-}
-
-func TestDismissBeforeUpdateIsNoop(t *testing.T) {
-	r := &fakeRecorder{}
-	w := NewWithLeads(80*time.Millisecond, 30*time.Millisecond, r)
-	defer w.Close()
-
-	// No deadline tracked yet; Dismiss must be a no-op (no panic, no state).
-	w.Dismiss()
-
-	d := time.Now().Add(100 * time.Millisecond)
-	_ = w.Update(d)
-
-	// Final warning should still publish — Dismiss only acts on the current
-	// deadline, and there was none at the time of the call.
-	deadline := time.Now().Add(500 * time.Millisecond)
-	for time.Now().Before(deadline) {
-		if countWhere(r.snapshot(), event.isFinalWarning) >= 1 {
-			return
-		}
-		time.Sleep(5 * time.Millisecond)
-	}
-	t.Fatalf("final-warning did not publish after no-op pre-Update Dismiss, events=%+v", r.snapshot())
-}

client/internal/connect.go

@@ -6,6 +6,7 @@ import (
 	"fmt"
 	"net"
 	"net/netip"
+	"path/filepath"
 	"runtime"
 	"runtime/debug"
 	"strings"
@@ -117,6 +118,8 @@ func (c *ConnectClient) RunOniOS(
 	networkChangeListener listener.NetworkChangeListener,
 	dnsManager dns.IosDnsManager,
 	stateFilePath string,
+	cacheDir string,
+	logFilePath string,
 ) error {
 	// Set GC percent to 5% to reduce memory usage as iOS only allows 50MB of memory for the extension.
 	debug.SetGCPercent(5)
@@ -126,8 +129,9 @@ func (c *ConnectClient) RunOniOS(
 		NetworkChangeListener: networkChangeListener,
 		DnsManager:            dnsManager,
 		StateFilePath:         stateFilePath,
+		TempDir:               cacheDir,
 	}
-	return c.run(mobileDependency, nil, "")
+	return c.run(mobileDependency, nil, logFilePath)
 }
 
 func (c *ConnectClient) run(mobileDependency MobileDependency, runningChan chan struct{}, logPath string) error {
@@ -256,15 +260,6 @@ func (c *ConnectClient) run(mobileDependency MobileDependency, runningChan chan
 		log.Debugf("connecting to the Management service %s", c.config.ManagementURL.Host)
 		mgmClient, err := mgm.NewClient(engineCtx, c.config.ManagementURL.Host, myPrivateKey, mgmTlsEnabled)
 		if err != nil {
-			// On daemon shutdown / Down() the parent context is cancelled
-			// and the dial fails with "context canceled". Wrapping that
-			// into state would leave the snapshot stuck at Connecting+err
-			// until the backoff loop wakes up — instead let the operation
-			// return cleanly so the deferred state.Set(StatusIdle) takes
-			// effect on the next iteration.
-			if c.ctx.Err() != nil {
-				return nil
-			}
 			return wrapErr(gstatus.Errorf(codes.FailedPrecondition, "failed connecting to Management Service : %s", err))
 		}
 		mgmNotifier := statusRecorderToMgmConnStateNotifier(c.statusRecorder)
@@ -355,6 +350,11 @@ func (c *ConnectClient) run(mobileDependency MobileDependency, runningChan chan
 			return wrapErr(err)
 		}
 		engineConfig.TempDir = mobileDependency.TempDir
+		// Leave StateDir empty when there is no state path so a disk-backed
+		// syncstore falls back to os.TempDir() instead of filepath.Dir("") == ".".
+		if path != "" {
+			engineConfig.StateDir = filepath.Dir(path)
+		}
 
 		relayManager := relayClient.NewManager(engineCtx, relayURLs, myPrivateKey.PublicKey().String(), engineConfig.MTU)
 		c.statusRecorder.SetRelayMgr(relayManager)
@@ -393,10 +393,6 @@ func (c *ConnectClient) run(mobileDependency MobileDependency, runningChan chan
 			return wrapErr(err)
 		}
 
-		// Seed the session-expiry deadline from the LoginResponse. Subsequent
-		// changes flow in through SyncResponse and are applied in handleSync.
-		engine.ApplySessionDeadline(loginResp.GetSessionExpiresAt())
-
 		log.Infof("Netbird engine started, the IP is: %s", peerConfig.GetAddress())
 		state.Set(StatusConnected)
 
@@ -437,11 +433,7 @@ func (c *ConnectClient) run(mobileDependency MobileDependency, runningChan chan
 	}
 
 	c.statusRecorder.ClientStart()
-	// Wrap the backoff with c.ctx so Down()/actCancel propagates into the
-	// inter-attempt sleep — otherwise a 15s MaxInterval can keep the retry
-	// loop alive long after the caller asked to give up, leaving the
-	// status stream stuck at Connecting.
-	err = backoff.Retry(operation, backoff.WithContext(backOff, c.ctx))
+	err = backoff.Retry(operation, backOff)
 	if err != nil {
 		log.Debugf("exiting client retry loop due to unrecoverable error: %s", err)
 		if s, ok := gstatus.FromError(err); ok && (s.Code() == codes.PermissionDenied) {

client/internal/debug/debug.go

@@ -250,10 +250,13 @@ type BundleGenerator struct {
 	syncResponse   *mgmProto.SyncResponse
 	logPath        string
 	tempDir        string
+	statePath      string
 	cpuProfile     []byte
 	capturePath    string
 	refreshStatus  func() // Optional callback to refresh status before bundle generation
 	clientMetrics  MetricsExporter
+	daemonVersion  string
+	cliVersion     string
 
 	anonymize         bool
 	includeSystemInfo bool
@@ -274,10 +277,13 @@ type GeneratorDependencies struct {
 	SyncResponse   *mgmProto.SyncResponse
 	LogPath        string
 	TempDir        string // Directory for temporary bundle zip files. If empty, os.TempDir() is used.
+	StatePath      string // Path to the state file. If empty, the ServiceManager default path is used.
 	CPUProfile     []byte
 	CapturePath    string
 	RefreshStatus  func()
 	ClientMetrics  MetricsExporter
+	DaemonVersion  string
+	CliVersion     string
 }
 
 func NewBundleGenerator(deps GeneratorDependencies, cfg BundleConfig) *BundleGenerator {
@@ -295,10 +301,13 @@ func NewBundleGenerator(deps GeneratorDependencies, cfg BundleConfig) *BundleGen
 		syncResponse:   deps.SyncResponse,
 		logPath:        deps.LogPath,
 		tempDir:        deps.TempDir,
+		statePath:      deps.StatePath,
 		cpuProfile:     deps.CPUProfile,
 		capturePath:    deps.CapturePath,
 		refreshStatus:  deps.RefreshStatus,
 		clientMetrics:  deps.ClientMetrics,
+		daemonVersion:  deps.DaemonVersion,
+		cliVersion:     deps.CliVersion,
 
 		anonymize:         cfg.Anonymize,
 		includeSystemInfo: cfg.IncludeSystemInfo,
@@ -459,9 +468,11 @@ func (g *BundleGenerator) addStatus() error {
 		protoFullStatus := nbstatus.ToProtoFullStatus(fullStatus)
 		protoFullStatus.Events = g.statusRecorder.GetEventHistory()
 		overview := nbstatus.ConvertToStatusOutputOverview(protoFullStatus, nbstatus.ConvertOptions{
-			Anonymize:   g.anonymize,
-			ProfileName: profName,
+			Anonymize:     g.anonymize,
+			ProfileName:   profName,
+			DaemonVersion: g.daemonVersion,
 		})
+		overview.CliVersion = g.cliVersion
 		statusOutput := overview.FullDetailSummary()
 
 		statusReader := strings.NewReader(statusOutput)
@@ -508,6 +519,14 @@ func (g *BundleGenerator) addConfig() error {
 		}
 	}
 
+	// Surface the set of MDM-enforced keys so a support engineer reading
+	// the bundle can tell which field values are user-set vs MDM-overridden.
+	// Same semantics as the mDMManagedFields list returned by the
+	// GetConfig RPC consumed by `netbird debug config`.
+	if managed := g.internalConfig.Policy().ManagedKeys(); len(managed) > 0 {
+		configContent.WriteString(fmt.Sprintf("MDMManagedFields: %v\n", managed))
+	}
+
 	configReader := strings.NewReader(configContent.String())
 	if err := g.addFileToZip(configReader, "config.txt"); err != nil {
 		return fmt.Errorf("add config file to zip: %w", err)
@@ -798,6 +817,8 @@ func (g *BundleGenerator) addSyncResponse() error {
 		AllowPartial:    true,
 	}
 
+	g.maskSecrets()
+
 	jsonBytes, err := options.Marshal(g.syncResponse)
 	if err != nil {
 		return fmt.Errorf("generate json: %w", err)
@@ -810,9 +831,33 @@ func (g *BundleGenerator) addSyncResponse() error {
 	return nil
 }
 
+func (g *BundleGenerator) maskSecrets() {
+	if g.syncResponse == nil || g.syncResponse.NetbirdConfig == nil {
+		return
+	}
+
+	if g.syncResponse.NetbirdConfig.Flow != nil {
+		g.syncResponse.NetbirdConfig.Flow.TokenPayload = maskedValue
+
+	}
+
+	if g.syncResponse.NetbirdConfig.Relay != nil {
+		g.syncResponse.NetbirdConfig.Relay.TokenPayload = maskedValue
+	}
+
+	for i := range g.syncResponse.NetbirdConfig.Turns {
+		if g.syncResponse.NetbirdConfig.Turns[i] != nil {
+			g.syncResponse.NetbirdConfig.Turns[i].Password = maskedValue
+		}
+	}
+}
+
 func (g *BundleGenerator) addStateFile() error {
-	sm := profilemanager.NewServiceManager("")
-	path := sm.GetStatePath()
+	path := g.statePath
+	if path == "" {
+		sm := profilemanager.NewServiceManager("")
+		path = sm.GetStatePath()
+	}
 	if path == "" {
 		return nil
 	}
@@ -1039,7 +1084,8 @@ func (g *BundleGenerator) addRotatedLogFiles(logDir string) {
 		return
 	}
 
-	pattern := filepath.Join(logDir, "client-*.log.gz")
+	// This regex will match both logs rotated by us and logrotate on linux
+	pattern := filepath.Join(logDir, "client*.log.*")
 	files, err := filepath.Glob(pattern)
 	if err != nil {
 		log.Warnf("failed to glob rotated logs: %v", err)
@@ -1072,7 +1118,12 @@ func (g *BundleGenerator) addRotatedLogFiles(logDir string) {
 
 	for i := 0; i < maxFiles; i++ {
 		name := filepath.Base(files[i])
-		if err := g.addSingleLogFileGz(files[i], name); err != nil {
+		if strings.HasSuffix(name, ".gz") {
+			err = g.addSingleLogFileGz(files[i], name)
+		} else {
+			err = g.addSingleLogfile(files[i], name)
+		}
+		if err != nil {
 			log.Warnf("failed to add rotated log %s: %v", name, err)
 		}
 	}

client/internal/debug/debug_ios.go

@@ -0,0 +1,36 @@
+//go:build ios
+
+package debug
+
+import (
+	"path/filepath"
+
+	log "github.com/sirupsen/logrus"
+)
+
+// swiftLogFile is the Swift app log written by the iOS app into the same log
+// directory as the Go client log, so it can be collected into the bundle.
+const swiftLogFile = "swift-log.log"
+
+// addPlatformLog collects logs for the iOS debug bundle. iOS has no logcat or
+// systemd journal, so we rely on file-based logs. addLogfile handles the Go
+// client log (logPath) with rotation, the stderr/stdout companions and
+// anonymization. The iOS app writes its own Swift log into the same directory,
+// so we add it alongside the Go log.
+func (g *BundleGenerator) addPlatformLog() error {
+	if err := g.addLogfile(); err != nil {
+		return err
+	}
+
+	if g.logPath == "" {
+		return nil
+	}
+
+	swiftLogPath := filepath.Join(filepath.Dir(g.logPath), swiftLogFile)
+	if err := g.addSingleLogfile(swiftLogPath, swiftLogFile); err != nil {
+		// The Swift log is best-effort: the app may not have written it yet.
+		log.Warnf("failed to add %s to debug bundle: %v", swiftLogFile, err)
+	}
+
+	return nil
+}

client/internal/debug/debug_logfiles_test.go

@@ -0,0 +1,103 @@
+package debug
+
+import (
+	"archive/zip"
+	"bytes"
+	"compress/gzip"
+	"io"
+	"os"
+	"path/filepath"
+	"testing"
+	"time"
+
+	"github.com/stretchr/testify/require"
+)
+
+// TestAddRotatedLogFiles_PicksUpAllVariants asserts that the rotated-log
+// glob picks up logs rotated by timberjack (gzipped) and by logrotate (plain
+// and gzipped), and skips unrelated files.
+func TestAddRotatedLogFiles_PicksUpAllVariants(t *testing.T) {
+	dir := t.TempDir()
+
+	writeFile(t, filepath.Join(dir, "client.log"), "active log\n")
+	writeFile(t, filepath.Join(dir, "other.log"), "unrelated\n")
+
+	timberjackRotated := "client-2026-05-21T10-30-45.000.log.gz"
+	writeGzFile(t, filepath.Join(dir, timberjackRotated), "timberjack rotated content\n")
+
+	logrotatePlain := "client.log.1"
+	writeFile(t, filepath.Join(dir, logrotatePlain), "logrotate plain content\n")
+
+	logrotateGz := "client.log.2.gz"
+	writeGzFile(t, filepath.Join(dir, logrotateGz), "logrotate gz content\n")
+
+	names := runAddRotatedLogFiles(t, dir, 10)
+
+	require.Contains(t, names, timberjackRotated, "timberjack rotated file should be in bundle")
+	require.Contains(t, names, logrotatePlain, "logrotate plain rotated file should be in bundle")
+	require.Contains(t, names, logrotateGz, "logrotate gzipped rotated file should be in bundle")
+	require.NotContains(t, names, "client.log", "active log should not be added by addRotatedLogFiles")
+	require.NotContains(t, names, "other.log", "unrelated files should not be in bundle")
+}
+
+// TestAddRotatedLogFiles_RespectsLogFileCount asserts that only the newest
+// logFileCount rotated files are bundled, ordered by mtime.
+func TestAddRotatedLogFiles_RespectsLogFileCount(t *testing.T) {
+	dir := t.TempDir()
+
+	oldest := filepath.Join(dir, "client.log.3")
+	middle := filepath.Join(dir, "client.log.2")
+	newest := filepath.Join(dir, "client.log.1")
+	writeFile(t, oldest, "old\n")
+	writeFile(t, middle, "mid\n")
+	writeFile(t, newest, "new\n")
+
+	now := time.Now()
+	require.NoError(t, os.Chtimes(oldest, now.Add(-2*time.Hour), now.Add(-2*time.Hour)))
+	require.NoError(t, os.Chtimes(middle, now.Add(-1*time.Hour), now.Add(-1*time.Hour)))
+	require.NoError(t, os.Chtimes(newest, now, now))
+
+	names := runAddRotatedLogFiles(t, dir, 2)
+
+	require.Contains(t, names, "client.log.1")
+	require.Contains(t, names, "client.log.2")
+	require.NotContains(t, names, "client.log.3", "oldest file should be dropped when logFileCount=2")
+}
+
+// runAddRotatedLogFiles calls addRotatedLogFiles against a fresh in-memory
+// zip writer and returns the set of entry names that ended up in the archive.
+func runAddRotatedLogFiles(t *testing.T, dir string, logFileCount uint32) map[string]struct{} {
+	t.Helper()
+
+	var buf bytes.Buffer
+	g := &BundleGenerator{
+		archive:      zip.NewWriter(&buf),
+		logFileCount: logFileCount,
+	}
+	g.addRotatedLogFiles(dir)
+	require.NoError(t, g.archive.Close())
+
+	zr, err := zip.NewReader(bytes.NewReader(buf.Bytes()), int64(buf.Len()))
+	require.NoError(t, err)
+
+	names := make(map[string]struct{}, len(zr.File))
+	for _, f := range zr.File {
+		names[f.Name] = struct{}{}
+	}
+	return names
+}
+
+func writeFile(t *testing.T, path, content string) {
+	t.Helper()
+	require.NoError(t, os.WriteFile(path, []byte(content), 0o644))
+}
+
+func writeGzFile(t *testing.T, path, content string) {
+	t.Helper()
+	var buf bytes.Buffer
+	gw := gzip.NewWriter(&buf)
+	_, err := io.WriteString(gw, content)
+	require.NoError(t, err)
+	require.NoError(t, gw.Close())
+	require.NoError(t, os.WriteFile(path, buf.Bytes(), 0o644))
+}

client/internal/debug/debug_nonandroid.go

@@ -1,4 +1,4 @@
-//go:build !android
+//go:build !android && !ios
 
 package debug
 

client/internal/debug/debug_test.go

@@ -843,6 +843,8 @@ func TestAddConfig_AllFieldsCovered(t *testing.T) {
 		"PreSharedKey":      "sensitive: WireGuard pre-shared key",
 		"SSHKey":            "sensitive: SSH private key",
 		"ClientCertKeyPair": "non-config: parsed cert pair, not serialized",
+		"Name":              "non-config: profile name is not needed for debug purposes",
+		"policy":            "non-config: in-memory MDM policy snapshot, surfaced via Config.Policy() / GetConfigResponse.MDMManagedFields",
 	}
 
 	mURL, _ := url.Parse("https://api.example.com:443")

client/internal/dns/local/local.go

@@ -482,7 +482,7 @@ func (d *Resolver) logDNSError(logger *log.Entry, hostname string, qtype uint16,
 // completely when every proxy peer is offline (the upstream may still
 // be reachable some other way, or the peerstore may be stale).
 func (d *Resolver) filterDisconnectedPeerAnswers(logger *log.Entry, question dns.Question, records []dns.RR) []dns.RR {
-	if len(records) == 0 {
+	if len(records) < 2 {
 		return records
 	}
 	d.mu.RLock()

client/internal/dns/local/local_test.go

@@ -2738,6 +2738,17 @@ func TestLocalResolver_FilterDisconnectedPeerAnswers(t *testing.T) {
 			connByIP:    nil,
 			wantInOrder: []string{"100.64.0.10", "100.64.0.11"},
 		},
+		{
+			// A single answer is never filtered: dropping it would only
+			// trigger the empty-answer escape hatch, so the fast path
+			// returns it untouched.
+			name:    "single disconnected answer passes through",
+			records: []nbdns.SimpleRecord{disconnectedRec},
+			connByIP: map[string]ipState{
+				"100.64.0.11": {known: true, connected: false},
+			},
+			wantInOrder: []string{"100.64.0.11"},
+		},
 	}
 
 	for _, tc := range tests {

client/internal/dns/resutil/resolve.go

@@ -14,6 +14,10 @@ import (
 	log "github.com/sirupsen/logrus"
 )
 
+// errNoSuitableAddress mirrors the unexported error string the net package
+// uses when a resolved host has no addresses of the requested family.
+const errNoSuitableAddress = "no suitable address found"
+
 // GenerateRequestID creates a random 8-character hex string for request tracing.
 func GenerateRequestID() string {
 	bytes := make([]byte, 4)
@@ -126,6 +130,14 @@ func LookupIP(ctx context.Context, r resolver, network, host string, qtype uint1
 }
 
 func getRcodeForError(ctx context.Context, r resolver, host string, qtype uint16, err error) int {
+	// The net package returns this AddrError when the host resolves but has
+	// no addresses of the requested family. The domain exists, so answer
+	// NODATA instead of SERVFAIL.
+	var addrErr *net.AddrError
+	if errors.As(err, &addrErr) && addrErr.Err == errNoSuitableAddress {
+		return dns.RcodeSuccess
+	}
+
 	var dnsErr *net.DNSError
 	if !errors.As(err, &dnsErr) {
 		return dns.RcodeServerFailure

client/internal/dns/resutil/resolve_test.go

@@ -0,0 +1,122 @@
+package resutil
+
+import (
+	"context"
+	"errors"
+	"net"
+	"net/netip"
+	"testing"
+
+	"github.com/miekg/dns"
+	"github.com/stretchr/testify/assert"
+	"github.com/stretchr/testify/require"
+)
+
+type mockResolver struct {
+	// results maps network ("ip4"/"ip6") to the lookup outcome.
+	results map[string]mockLookup
+}
+
+type mockLookup struct {
+	ips []netip.Addr
+	err error
+}
+
+func (m *mockResolver) LookupNetIP(_ context.Context, network, _ string) ([]netip.Addr, error) {
+	res, ok := m.results[network]
+	if !ok {
+		return nil, errors.New("unexpected network: " + network)
+	}
+	return res.ips, res.err
+}
+
+func TestLookupIP_Success(t *testing.T) {
+	r := &mockResolver{results: map[string]mockLookup{
+		"ip4": {ips: []netip.Addr{netip.MustParseAddr("::ffff:192.0.2.1")}},
+	}}
+
+	result := LookupIP(context.Background(), r, "ip4", "example.com.", dns.TypeA)
+
+	assert.Equal(t, dns.RcodeSuccess, result.Rcode, "successful lookup should return NOERROR")
+	require.Len(t, result.IPs, 1, "should return the resolved address")
+	assert.Equal(t, netip.MustParseAddr("192.0.2.1"), result.IPs[0], "v4-mapped address should be unmapped")
+}
+
+func TestLookupIP_NoSuitableAddress(t *testing.T) {
+	// The net package returns this AddrError when the host resolves but has
+	// no addresses of the requested family (e.g. AAAA query for a v4-only
+	// hosts file entry). The domain exists, so this is NODATA, not SERVFAIL.
+	r := &mockResolver{results: map[string]mockLookup{
+		"ip6": {err: &net.AddrError{Err: "no suitable address found", Addr: "example.com."}},
+	}}
+
+	result := LookupIP(context.Background(), r, "ip6", "example.com.", dns.TypeAAAA)
+
+	assert.Equal(t, dns.RcodeSuccess, result.Rcode, "no suitable address should map to NODATA")
+	assert.Empty(t, result.IPs, "NODATA response should carry no addresses")
+}
+
+// TestErrNoSuitableAddressMatchesNetPackage pins our copy of the error string
+// to what the net package actually emits. A literal IP of the wrong family
+// takes the same filterAddrList path as a resolved hostname, without network
+// access.
+func TestErrNoSuitableAddressMatchesNetPackage(t *testing.T) {
+	_, err := (&net.Resolver{}).LookupNetIP(context.Background(), "ip6", "192.0.2.1")
+	require.Error(t, err)
+
+	var addrErr *net.AddrError
+	require.ErrorAs(t, err, &addrErr, "wrong-family lookup should return AddrError")
+	assert.Equal(t, errNoSuitableAddress, addrErr.Err, "net package error string should match our constant")
+}
+
+func TestLookupIP_OtherAddrError(t *testing.T) {
+	r := &mockResolver{results: map[string]mockLookup{
+		"ip4": {err: &net.AddrError{Err: "some other address problem", Addr: "example.com."}},
+	}}
+
+	result := LookupIP(context.Background(), r, "ip4", "example.com.", dns.TypeA)
+
+	assert.Equal(t, dns.RcodeServerFailure, result.Rcode, "unrecognized AddrError should map to SERVFAIL")
+}
+
+func TestLookupIP_NotFoundNXDomain(t *testing.T) {
+	r := &mockResolver{results: map[string]mockLookup{
+		"ip4": {err: &net.DNSError{Err: "no such host", Name: "example.com.", IsNotFound: true}},
+		"ip6": {err: &net.DNSError{Err: "no such host", Name: "example.com.", IsNotFound: true}},
+	}}
+
+	result := LookupIP(context.Background(), r, "ip4", "example.com.", dns.TypeA)
+
+	assert.Equal(t, dns.RcodeNameError, result.Rcode, "not found for both families should map to NXDOMAIN")
+}
+
+func TestLookupIP_NotFoundNoData(t *testing.T) {
+	r := &mockResolver{results: map[string]mockLookup{
+		"ip6": {err: &net.DNSError{Err: "no such host", Name: "example.com.", IsNotFound: true}},
+		"ip4": {ips: []netip.Addr{netip.MustParseAddr("192.0.2.1")}},
+	}}
+
+	result := LookupIP(context.Background(), r, "ip6", "example.com.", dns.TypeAAAA)
+
+	assert.Equal(t, dns.RcodeSuccess, result.Rcode, "not found with the other family present should map to NODATA")
+}
+
+func TestLookupIP_GenericError(t *testing.T) {
+	r := &mockResolver{results: map[string]mockLookup{
+		"ip4": {err: errors.New("connection refused")},
+	}}
+
+	result := LookupIP(context.Background(), r, "ip4", "example.com.", dns.TypeA)
+
+	assert.Equal(t, dns.RcodeServerFailure, result.Rcode, "generic error should map to SERVFAIL")
+}
+
+func TestLookupIP_DNSErrorNotIsNotFound(t *testing.T) {
+	r := &mockResolver{results: map[string]mockLookup{
+		"ip4": {err: &net.DNSError{Err: "server misbehaving", Name: "example.com.", IsTemporary: true}},
+	}}
+
+	result := LookupIP(context.Background(), r, "ip4", "example.com.", dns.TypeA)
+
+	assert.Equal(t, dns.RcodeServerFailure, result.Rcode, "upstream failure should map to SERVFAIL")
+}

client/internal/dns/server.go

@@ -777,13 +777,24 @@ func (s *DefaultServer) applyHostConfig() {
 // context is released rather than leaked until GC.
 func (s *DefaultServer) registerFallback() {
 	originalNameservers := s.hostManager.getOriginalNameservers()
-	if len(originalNameservers) == 0 {
+
+	serverIP := s.service.RuntimeIP()
+	var servers []netip.AddrPort
+	for _, ns := range originalNameservers {
+		if ns == serverIP {
+			log.Debugf("skipping original nameserver %s as it is the same as the server IP %s", ns, serverIP)
+			continue
+		}
+		servers = append(servers, netip.AddrPortFrom(ns, DefaultPort))
+	}
+
+	if len(servers) == 0 {
 		log.Debugf("no fallback upstreams to register; clearing PriorityFallback handler")
 		s.clearFallback()
 		return
 	}
 
-	log.Infof("registering original nameservers %v as upstream handlers with priority %d", originalNameservers, PriorityFallback)
+	log.Infof("registering original nameservers %v as upstream handlers with priority %d", servers, PriorityFallback)
 
 	handler, err := newUpstreamResolver(
 		s.ctx,
@@ -797,11 +808,6 @@ func (s *DefaultServer) registerFallback() {
 		return
 	}
 	handler.selectedRoutes = s.selectedRoutes
-
-	var servers []netip.AddrPort
-	for _, ns := range originalNameservers {
-		servers = append(servers, netip.AddrPortFrom(ns, DefaultPort))
-	}
 	handler.addRace(servers)
 
 	prev := s.fallbackHandler

client/internal/engine.go

@@ -22,7 +22,6 @@ import (
 	log "github.com/sirupsen/logrus"
 	"golang.zx2c4.com/wireguard/tun/netstack"
 	"golang.zx2c4.com/wireguard/wgctrl/wgtypes"
-	"google.golang.org/protobuf/proto"
 
 	nberrors "github.com/netbirdio/netbird/client/errors"
 	"github.com/netbirdio/netbird/client/firewall"
@@ -54,8 +53,8 @@ import (
 	"github.com/netbirdio/netbird/client/internal/relay"
 	"github.com/netbirdio/netbird/client/internal/rosenpass"
 	"github.com/netbirdio/netbird/client/internal/routemanager"
-	"github.com/netbirdio/netbird/client/internal/routemanager/systemops"
 	"github.com/netbirdio/netbird/client/internal/statemanager"
+	"github.com/netbirdio/netbird/client/internal/syncstore"
 	"github.com/netbirdio/netbird/client/internal/updater"
 	"github.com/netbirdio/netbird/client/jobexec"
 	cProto "github.com/netbirdio/netbird/client/proto"
@@ -65,13 +64,13 @@ import (
 	mgm "github.com/netbirdio/netbird/shared/management/client"
 	"github.com/netbirdio/netbird/shared/management/domain"
 	mgmProto "github.com/netbirdio/netbird/shared/management/proto"
-	"github.com/netbirdio/netbird/shared/netiputil"
 	auth "github.com/netbirdio/netbird/shared/relay/auth/hmac"
 	relayClient "github.com/netbirdio/netbird/shared/relay/client"
 	signal "github.com/netbirdio/netbird/shared/signal/client"
 	sProto "github.com/netbirdio/netbird/shared/signal/proto"
 	"github.com/netbirdio/netbird/util"
 	"github.com/netbirdio/netbird/util/capture"
+	"github.com/netbirdio/netbird/version"
 )
 
 // PeerConnectionTimeoutMax is a timeout of an initial connection attempt to a remote peer.
@@ -148,6 +147,10 @@ type EngineConfig struct {
 
 	LogPath string
 	TempDir string
+
+	// StateDir is the directory holding the state file. The sync response
+	// (network map) is serialized here on platforms that persist it to disk.
+	StateDir string
 }
 
 // EngineServices holds the external service dependencies required by the Engine.
@@ -226,11 +229,16 @@ type Engine struct {
 
 	afpacketCapture *capture.AFPacketCapture
 
-	// Sync response persistence (protected by syncRespMux)
-	syncRespMux         sync.RWMutex
-	persistSyncResponse bool
-	latestSyncResponse  *mgmProto.SyncResponse
-	flowManager         nftypes.FlowManager
+	// Sync response persistence (protected by syncRespMux).
+	// syncStore is nil unless persistence has been enabled; its presence is
+	// what marks persistence as active. The backend (disk or memory) is
+	// selected per-platform; see the syncstore package. syncStoreDir is where
+	// a disk-backed store serializes to.
+	syncRespMux  sync.RWMutex
+	syncStore    syncstore.Store
+	syncStoreDir string
+
+	flowManager nftypes.FlowManager
 
 	// auto-update
 	updateManager *updater.Manager
@@ -250,20 +258,6 @@ type Engine struct {
 	jobExecutorWG sync.WaitGroup
 
 	exposeManager *expose.Manager
-
-	sessionWatcher sessionDeadlineWatcher
-}
-
-// sessionDeadlineWatcher is the engine-facing surface of the SSO session
-// expiry watcher. The concrete implementation (sessionwatch.Watcher) is wired
-// in via newSessionWatcher, which is build-tagged so the js/wasm build links a
-// no-op stub instead of pulling the full sessionwatch package (and its timer
-// machinery) into the binary — the wasm client never runs the engine's
-// session-warning flow.
-type sessionDeadlineWatcher interface {
-	Update(deadline time.Time) error
-	Dismiss()
-	Close()
 }
 
 // Peer is an instance of the Connection Peer
@@ -306,18 +300,8 @@ func NewEngine(
 		jobExecutor:        jobexec.NewExecutor(),
 		clientMetrics:      services.ClientMetrics,
 		updateManager:      services.UpdateManager,
+		syncStoreDir:       config.StateDir,
 	}
-	// sessionWatcher keeps the SubscribeStatus consumers in sync with the
-	// session expiry deadline. Deadline-change ticks come for free via
-	// Status.SetSessionExpiresAt; the watcher exists to push a wake-up at
-	// T-WarningLead and T-FinalWarningLead so the UI repaints the remaining
-	// time / warning state even when nothing else changed, and to publish
-	// two SystemEvents (the warning composition lives in sessionwatch so
-	// the wire format stays owned by one package):
-	//   - T-WarningLead   → interactive "Extend now / Dismiss" notification
-	//   - T-FinalWarningLead → auto-opened SessionAboutToExpire dialog,
-	//     suppressed when the user dismissed the earlier warning
-	engine.sessionWatcher = newSessionWatcher(engine.statusRecorder)
 
 	log.Infof("I am: %s", config.WgPrivateKey.PublicKey().String())
 	return engine
@@ -358,10 +342,6 @@ func (e *Engine) Stop() error {
 		e.srWatcher.Close()
 	}
 
-	if e.sessionWatcher != nil {
-		e.sessionWatcher.Close()
-	}
-
 	if e.updateManager != nil {
 		e.updateManager.SetDownloadOnly()
 	}
@@ -549,6 +529,10 @@ func (e *Engine) Start(netbirdConfig *mgmProto.NetbirdConfig, mgmtURL *url.URL)
 		return fmt.Errorf("create wg interface: %w", err)
 	}
 
+	if filteredDevice := e.wgInterface.GetDevice(); filteredDevice != nil {
+		filteredDevice.SetPanicHandler(e.triggerClientRestart)
+	}
+
 	if err := e.createFirewall(); err != nil {
 		e.close()
 		return err
@@ -894,69 +878,29 @@ func (e *Engine) handleSync(update *mgmProto.SyncResponse) error {
 		return e.ctx.Err()
 	}
 
-	e.ApplySessionDeadline(update.GetSessionExpiresAt())
-
 	if update.NetworkMap != nil && update.NetworkMap.PeerConfig != nil {
 		e.handleAutoUpdateVersion(update.NetworkMap.PeerConfig.AutoUpdate)
 	}
 
-	if update.GetNetbirdConfig() != nil {
-		wCfg := update.GetNetbirdConfig()
-		err := e.updateTURNs(wCfg.GetTurns())
-		if err != nil {
-			return fmt.Errorf("update TURNs: %w", err)
-		}
+	if err := e.updateNetbirdConfig(update.GetNetbirdConfig()); err != nil {
+		return err
+	}
 
-		err = e.updateSTUNs(wCfg.GetStuns())
-		if err != nil {
-			return fmt.Errorf("update STUNs: %w", err)
-		}
-
-		var stunTurn []*stun.URI
-		stunTurn = append(stunTurn, e.STUNs...)
-		stunTurn = append(stunTurn, e.TURNs...)
-		e.stunTurn.Store(stunTurn)
-
-		err = e.handleRelayUpdate(wCfg.GetRelay())
-		if err != nil {
-			return err
-		}
-
-		err = e.handleFlowUpdate(wCfg.GetFlow())
-		if err != nil {
-			return fmt.Errorf("handle the flow configuration: %w", err)
-		}
-
-		if err := e.PopulateNetbirdConfig(wCfg, nil); err != nil {
-			log.Warnf("Failed to update DNS server config: %v", err)
-		}
-
-		// todo update signal
+	// Posture checks are bound to the network map presence:
+	//   NetworkMap != nil, checks present -> apply the received checks
+	//   NetworkMap != nil, checks nil     -> posture checks were removed, clear them
+	//   NetworkMap == nil                 -> config-only update (e.g. relay token rotation),
+	//                                        leave the previously applied checks untouched
+	nm := update.GetNetworkMap()
+	if nm == nil {
+		return nil
 	}
 
 	if err := e.updateChecksIfNew(update.Checks); err != nil {
 		return err
 	}
 
-	nm := update.GetNetworkMap()
-	if nm == nil {
-		return nil
-	}
-
-	// Persist sync response under the dedicated lock (syncRespMux), not under syncMsgMux.
-	// Read the storage-enabled flag under the syncRespMux too.
-	e.syncRespMux.RLock()
-	enabled := e.persistSyncResponse
-	e.syncRespMux.RUnlock()
-
-	// Store sync response if persistence is enabled
-	if enabled {
-		e.syncRespMux.Lock()
-		e.latestSyncResponse = update
-		e.syncRespMux.Unlock()
-
-		log.Debugf("sync response persisted with serial %d", nm.GetSerial())
-	}
+	e.persistSyncResponse(update)
 
 	// only apply new changes and ignore old ones
 	if err := e.updateNetworkMap(nm); err != nil {
@@ -968,6 +912,64 @@ func (e *Engine) handleSync(update *mgmProto.SyncResponse) error {
 	return nil
 }
 
+// updateNetbirdConfig applies the management-provided NetBird configuration:
+// STUN/TURN and relay servers, flow logging and DNS settings. A nil config is a no-op,
+// which is the case for sync updates carrying only a network map.
+func (e *Engine) updateNetbirdConfig(wCfg *mgmProto.NetbirdConfig) error {
+	if wCfg == nil {
+		return nil
+	}
+
+	if err := e.updateTURNs(wCfg.GetTurns()); err != nil {
+		return fmt.Errorf("update TURNs: %w", err)
+	}
+
+	if err := e.updateSTUNs(wCfg.GetStuns()); err != nil {
+		return fmt.Errorf("update STUNs: %w", err)
+	}
+
+	var stunTurn []*stun.URI
+	stunTurn = append(stunTurn, e.STUNs...)
+	stunTurn = append(stunTurn, e.TURNs...)
+	e.stunTurn.Store(stunTurn)
+
+	if err := e.handleRelayUpdate(wCfg.GetRelay()); err != nil {
+		return err
+	}
+
+	if err := e.handleFlowUpdate(wCfg.GetFlow()); err != nil {
+		return fmt.Errorf("handle the flow configuration: %w", err)
+	}
+
+	if err := e.PopulateNetbirdConfig(wCfg, nil); err != nil {
+		log.Warnf("Failed to update DNS server config: %v", err)
+	}
+
+	// todo update signal
+
+	return nil
+}
+
+// persistSyncResponse stores the full sync response so it can be restored on the next
+// startup. Persistence is enabled only when syncStore is set. The dedicated syncRespMux
+// (not syncMsgMux) is held for the whole Set so the store cannot be cleared (disabled /
+// engine close) mid-call and have this write resurrect a file that was just removed.
+func (e *Engine) persistSyncResponse(update *mgmProto.SyncResponse) {
+	e.syncRespMux.RLock()
+	defer e.syncRespMux.RUnlock()
+
+	if e.syncStore == nil {
+		return
+	}
+
+	if err := e.syncStore.Set(update); err != nil {
+		log.Errorf("failed to persist sync response: %v", err)
+		return
+	}
+
+	log.Debugf("sync response persisted with serial %d", update.GetNetworkMap().GetSerial())
+}
+
 func (e *Engine) handleRelayUpdate(update *mgmProto.RelayConfig) error {
 	if update != nil {
 		// when we receive token we expect valid address list too
@@ -1075,11 +1077,17 @@ func (e *Engine) updateConfig(conf *mgmProto.PeerConfig) error {
 		return ErrResetConnection
 	}
 
-	if !e.config.DisableIPv6 && e.hasIPv6Changed(conf) {
-		log.Infof("peer IPv6 address changed, restarting client")
-		_ = CtxGetState(e.ctx).Wrap(ErrResetConnection)
-		e.clientCancel()
-		return ErrResetConnection
+	if !e.config.DisableIPv6 {
+		reset, err := e.reconcileIPv6(conf)
+		if err != nil {
+			log.Warnf("reconcile IPv6 from PeerConfig: %v", err)
+		}
+		if reset {
+			log.Infof("peer IPv6 address changed value, restarting client")
+			_ = CtxGetState(e.ctx).Wrap(ErrResetConnection)
+			e.clientCancel()
+			return ErrResetConnection
+		}
 	}
 
 	if conf.GetSshConfig() != nil {
@@ -1094,31 +1102,65 @@ func (e *Engine) updateConfig(conf *mgmProto.PeerConfig) error {
 	state.PubKey = e.config.WgPrivateKey.PublicKey().String()
 	state.KernelInterface = !e.wgInterface.IsUserspaceBind()
 	state.FQDN = conf.GetFqdn()
+	state.WgPort = e.config.WgPort
 
 	e.statusRecorder.UpdateLocalPeerState(state)
 
 	return nil
 }
 
-// hasIPv6Changed reports whether the IPv6 overlay address in the peer config
-// differs from the configured address (added, removed, or changed).
-// Compares against e.config.WgAddr (not the interface address, which may have
-// been cleared by ClearIPv6 if OS assignment failed).
-func (e *Engine) hasIPv6Changed(conf *mgmProto.PeerConfig) bool {
-	current := e.config.WgAddr
+// reconcileIPv6 applies the management-supplied IPv6 overlay address to the
+// engine's WireGuard interface in place when possible. Three transitions:
+//
+//   - First v6 assignment (current had no v6, conf carries one): apply via
+//     WGIface.UpdateAddr, no reset. Critical for embedded clients whose
+//     boot config has no v6 — without this we reset on every fresh start
+//     once management has v6 enabled, orphaning any netstack listeners
+//     held outside the engine.
+//   - v6 removed (current had v6, conf carries none): clear in place, no
+//     reset.
+//   - v6 swapped to a different non-empty value: returns reset=true so the
+//     caller falls back to the engine-recreate path — the underlying
+//     interface address can't be safely swapped in place across all
+//     backends (gVisor netstack in particular fixes its address at
+//     CreateNetTUN time).
+//
+// Mutates e.config.WgAddr to match the applied state so subsequent
+// PeerConfig comparisons are stable.
+func (e *Engine) reconcileIPv6(conf *mgmProto.PeerConfig) (reset bool, err error) {
 	raw := conf.GetAddressV6()
+	current := e.config.WgAddr
 
 	if len(raw) == 0 {
-		return current.HasIPv6()
+		if !current.HasIPv6() {
+			return false, nil
+		}
+		current.ClearIPv6()
+		e.config.WgAddr = current
+		if err := e.wgInterface.UpdateAddr(current); err != nil {
+			return false, fmt.Errorf("clear ipv6 on wg interface: %w", err)
+		}
+		return false, nil
 	}
 
-	prefix, err := netiputil.DecodePrefix(raw)
-	if err != nil {
-		log.Errorf("decode v6 overlay address: %v", err)
-		return false
+	incoming := current
+	if err := incoming.SetIPv6FromCompact(raw); err != nil {
+		return false, fmt.Errorf("decode v6 overlay address: %w", err)
 	}
 
-	return !current.HasIPv6() || current.IPv6 != prefix.Addr() || current.IPv6Net != prefix.Masked()
+	if !current.HasIPv6() {
+		e.config.WgAddr = incoming
+		if err := e.wgInterface.UpdateAddr(incoming); err != nil {
+			return false, fmt.Errorf("apply ipv6 on wg interface: %w", err)
+		}
+		return false, nil
+	}
+
+	if current.IPv6 == incoming.IPv6 && current.IPv6Net == incoming.IPv6Net {
+		return false, nil
+	}
+
+	return true, nil
 }
 
 func (e *Engine) receiveJobEvents() {
@@ -1172,8 +1214,9 @@ func (e *Engine) handleBundle(params *mgmProto.BundleParameters) (*mgmProto.JobR
 		LogPath:        e.config.LogPath,
 		TempDir:        e.config.TempDir,
 		ClientMetrics:  e.clientMetrics,
+		DaemonVersion:  version.NetbirdVersion(),
 		RefreshStatus: func() {
-			e.RunHealthProbes(e.ctx, true)
+			e.RunHealthProbes(true)
 		},
 	}
 
@@ -1709,6 +1752,13 @@ func (e *Engine) receiveSignalEvents() {
 				return e.ctx.Err()
 			}
 
+			// Self-addressed heartbeat: the signal client's receive watchdog
+			// round-trips this through the server to confirm the receive stream
+			// is delivering. Liveness is already recorded before this handler.
+			if msg.GetBody().GetType() == sProto.Body_HEARTBEAT {
+				return nil
+			}
+
 			conn, ok := e.peerStore.PeerConn(msg.Key)
 			if !ok {
 				return fmt.Errorf("wrongly addressed message %s", msg.Key)
@@ -1844,6 +1894,18 @@ func (e *Engine) close() {
 	if err := e.portForwardManager.GracefullyStop(ctx); err != nil {
 		log.Warnf("failed to gracefully stop port forwarding manager: %s", err)
 	}
+
+	// Drop any persisted sync response so its network map does not linger on
+	// disk after the engine stops (and cannot leak into a later run).
+	e.syncRespMux.Lock()
+	store := e.syncStore
+	e.syncStore = nil
+	e.syncRespMux.Unlock()
+	if store != nil {
+		if err := store.Clear(); err != nil {
+			log.Warnf("failed to clear persisted sync response on close: %v", err)
+		}
+	}
 }
 
 func (e *Engine) readInitialSettings() ([]*route.Route, *nbdns.Config, bool, error) {
@@ -1895,7 +1957,6 @@ func (e *Engine) newWgIface() (*iface.WGIface, error) {
 		WGPrivKey:    e.config.WgPrivateKey.String(),
 		MTU:          e.config.MTU,
 		TransportNet: transportNet,
-		FilterFn:     e.addrViaRoutes,
 		DisableDNS:   e.config.DisableDNS,
 	}
 
@@ -2058,20 +2119,7 @@ func (e *Engine) getRosenpassAddr() string {
 
 // RunHealthProbes executes health checks for Signal, Management, Relay, and WireGuard services
 // and updates the status recorder with the latest states.
-//
-// ctx scopes the (potentially slow) STUN/TURN probing: a caller that gives up —
-// e.g. a Status RPC whose client disconnected — cancels its ctx and the probe
-// returns instead of running to its per-component timeout. The engine's own
-// lifetime ctx still applies independently, so an engine shutdown aborts the
-// probe even if the caller's ctx is context.Background().
-func (e *Engine) RunHealthProbes(ctx context.Context, waitForResult bool) bool {
-	// Tie the caller's ctx to the engine lifetime: either cancelling aborts
-	// the probe below.
-	ctx, cancel := context.WithCancel(ctx)
-	defer cancel()
-	stop := context.AfterFunc(e.ctx, cancel)
-	defer stop()
-
+func (e *Engine) RunHealthProbes(waitForResult bool) bool {
 	e.syncMsgMux.Lock()
 
 	signalHealthy := e.signal.IsHealthy()
@@ -2094,9 +2142,9 @@ func (e *Engine) RunHealthProbes(ctx context.Context, waitForResult bool) bool {
 	if runtime.GOOS != "js" {
 		var results []relay.ProbeResult
 		if waitForResult {
-			results = e.probeStunTurn.ProbeAllWaitResult(ctx, stuns, turns)
+			results = e.probeStunTurn.ProbeAllWaitResult(e.ctx, stuns, turns)
 		} else {
-			results = e.probeStunTurn.ProbeAll(ctx, stuns, turns)
+			results = e.probeStunTurn.ProbeAll(e.ctx, stuns, turns)
 		}
 		e.statusRecorder.UpdateRelayStates(results)
 
@@ -2156,21 +2204,6 @@ func (e *Engine) startNetworkMonitor() {
 	}()
 }
 
-func (e *Engine) addrViaRoutes(addr netip.Addr) (bool, netip.Prefix, error) {
-	var vpnRoutes []netip.Prefix
-	for _, routes := range e.routeManager.GetClientRoutes() {
-		if len(routes) > 0 && routes[0] != nil {
-			vpnRoutes = append(vpnRoutes, routes[0].Network)
-		}
-	}
-
-	if isVpn, prefix := systemops.IsAddrRouted(addr, vpnRoutes); isVpn {
-		return true, prefix, nil
-	}
-
-	return false, netip.Prefix{}, nil
-}
-
 func (e *Engine) stopDNSServer() {
 	if e.dnsServer == nil {
 		return
@@ -2186,45 +2219,42 @@ func (e *Engine) stopDNSServer() {
 	e.statusRecorder.UpdateDNSStates(nsGroupStates)
 }
 
-// SetSyncResponsePersistence enables or disables sync response persistence
+// SetSyncResponsePersistence enables or disables sync response persistence.
+// The store is only instantiated while persistence is enabled; construction
+// itself drops any stale data left over from an earlier run (see syncstore).
 func (e *Engine) SetSyncResponsePersistence(enabled bool) {
 	e.syncRespMux.Lock()
 	defer e.syncRespMux.Unlock()
 
-	if enabled == e.persistSyncResponse {
+	if enabled == (e.syncStore != nil) {
 		return
 	}
-	e.persistSyncResponse = enabled
 	log.Debugf("Sync response persistence is set to %t", enabled)
 
 	if !enabled {
-		e.latestSyncResponse = nil
+		if err := e.syncStore.Clear(); err != nil {
+			log.Warnf("failed to clear persisted sync response: %v", err)
+		}
+		e.syncStore = nil
+		return
 	}
+
+	e.syncStore = syncstore.New(e.syncStoreDir)
 }
 
 // GetLatestSyncResponse returns the stored sync response if persistence is enabled
 func (e *Engine) GetLatestSyncResponse() (*mgmProto.SyncResponse, error) {
+	// Hold the lock for the whole Get so the store cannot be cleared
+	// (disabled / engine close) mid-call.
 	e.syncRespMux.RLock()
-	enabled := e.persistSyncResponse
-	latest := e.latestSyncResponse
-	e.syncRespMux.RUnlock()
+	defer e.syncRespMux.RUnlock()
 
-	if !enabled {
+	if e.syncStore == nil {
 		return nil, errors.New("sync response persistence is disabled")
 	}
 
-	if latest == nil {
-		//nolint:nilnil
-		return nil, nil
-	}
-
-	log.Debugf("Retrieving latest sync response with size %d bytes", proto.Size(latest))
-	sr, ok := proto.Clone(latest).(*mgmProto.SyncResponse)
-	if !ok {
-		return nil, fmt.Errorf("failed to clone sync response")
-	}
-
-	return sr, nil
+	//nolint:nilnil
+	return e.syncStore.Get()
 }
 
 // GetWgAddr returns the wireguard address
@@ -2260,7 +2290,7 @@ func (e *Engine) updateDNSForwarder(
 	enabled bool,
 	fwdEntries []*dnsfwd.ForwarderEntry,
 ) {
-	if e.config.DisableServerRoutes {
+	if e.config.DisableServerRoutes || e.config.BlockInbound {
 		return
 	}
 

client/internal/engine_authsession.go

@@ -1,99 +0,0 @@
-package internal
-
-import (
-	"context"
-	"errors"
-	"fmt"
-	"time"
-
-	log "github.com/sirupsen/logrus"
-	"google.golang.org/protobuf/types/known/timestamppb"
-
-	"github.com/netbirdio/netbird/client/system"
-)
-
-// ApplySessionDeadline propagates the absolute SSO session deadline carried on
-// LoginResponse / SyncResponse to both the watcher (for the edge-triggered
-// warning) and the status recorder (for the SubscribeStatus / Status RPC
-// snapshot the UI consumes).
-//
-// The wire field is 3-state:
-//   - nil                        → snapshot carries no info; keep the
-//     previously-anchored deadline (no-op)
-//   - explicit zero (s=0, n=0)   → peer is not SSO-registered or expiry is
-//     disabled; clear both sinks
-//   - valid timestamp            → new deadline; arm watcher, expose on
-//     status recorder
-//
-// Deadline sanity-checks live in sessionwatch.Watcher.Update. Any rejected
-// value is treated as a clear on both sinks: the alternative — leaving the
-// previously-known deadline in place — risks the UI confidently displaying
-// a stale "expires in X" while the server has actually invalidated it.
-func (e *Engine) ApplySessionDeadline(ts *timestamppb.Timestamp) {
-	if ts == nil {
-		return
-	}
-	var deadline time.Time
-	// Explicit zero (seconds=0 AND nanos=0) is the sentinel for "disabled".
-	// Everything else flows through Watcher.Update, whose sanity-checks
-	// reject out-of-range / pre-epoch / far-future / too-stale values and
-	// clear on rejection.
-	if ts.GetSeconds() != 0 || ts.GetNanos() != 0 {
-		deadline = ts.AsTime().UTC()
-	}
-	if e.sessionWatcher == nil {
-		return
-	}
-	// Watcher.Update owns the propagation to the status recorder (the
-	// SubscribeStatus / Status snapshot the UI reads): a set writes the
-	// deadline, a clear or a sanity-check rejection writes the zero value.
-	// Keeping a single writer is what stops the recorder from drifting out
-	// of sync with the warning timers.
-	if err := e.sessionWatcher.Update(deadline); err != nil {
-		log.Errorf("auth session deadline rejected: %v, clearing", err)
-	}
-}
-
-// DismissSessionWarning records the user's "Dismiss" click on the
-// T-WarningLead interactive notification and suppresses the upcoming
-// T-FinalWarningLead fallback for the current deadline. No-op when the
-// watcher is not running or holds no deadline.
-func (e *Engine) DismissSessionWarning() {
-	if e.sessionWatcher == nil {
-		return
-	}
-	e.sessionWatcher.Dismiss()
-}
-
-// ExtendAuthSession asks the management server to refresh the SSO session
-// expiry deadline using the supplied JWT, then mirrors the new deadline into
-// the daemon's state. The tunnel is untouched; no resync, no reconnect.
-//
-// Returns the new absolute UTC deadline (or zero time when the server
-// reports the peer is not eligible for extension).
-func (e *Engine) ExtendAuthSession(ctx context.Context, jwtToken string) (time.Time, error) {
-	if jwtToken == "" {
-		return time.Time{}, errors.New("jwt token is required")
-	}
-	if e.mgmClient == nil {
-		return time.Time{}, errors.New("management client is not initialised")
-	}
-
-	info, err := system.GetInfoWithChecks(ctx, e.checks)
-	if err != nil {
-		log.Warnf("failed to collect system info for session extend: %v", err)
-		info = system.GetInfo(ctx)
-	}
-
-	resp, err := e.mgmClient.ExtendAuthSession(info, jwtToken)
-	if err != nil {
-		return time.Time{}, fmt.Errorf("extend auth session on management: %w", err)
-	}
-
-	e.ApplySessionDeadline(resp.GetSessionExpiresAt())
-
-	if resp.GetSessionExpiresAt().IsValid() {
-		return resp.GetSessionExpiresAt().AsTime().UTC(), nil
-	}
-	return time.Time{}, nil
-}

client/internal/engine_reconcileipv6_test.go

@@ -0,0 +1,305 @@
+package internal
+
+import (
+	"context"
+	"errors"
+	"net/netip"
+	"sync"
+	"testing"
+
+	"github.com/stretchr/testify/assert"
+	"github.com/stretchr/testify/require"
+
+	"github.com/netbirdio/netbird/client/iface/wgaddr"
+	"github.com/netbirdio/netbird/client/internal/peer"
+	mgmtProto "github.com/netbirdio/netbird/shared/management/proto"
+	"github.com/netbirdio/netbird/shared/netiputil"
+)
+
+// reconcileIPv6 / updateConfig regression suite. Locks down the behavior that
+// PR #5631 (main-side IPv6 overlay support) accidentally broke for embedded
+// netstack clients: any first NetworkMap update that brings an IPv6 address
+// used to trigger ErrResetConnection, which destroys the netstack and orphans
+// every listener bound on it (proxy-side inbound listeners in particular).
+// The fix in reconcileIPv6 distinguishes "v6 first-assigned" (apply in place)
+// from "v6 swapped value" (must reset).
+
+func mustEncodeV6Prefix(t *testing.T, p netip.Prefix) []byte {
+	t.Helper()
+	b, err := netiputil.EncodePrefix(p)
+	require.NoError(t, err, "encode v6 prefix %s", p)
+	return b
+}
+
+// reconcileIPv6Fixture builds the smallest Engine the function under test
+// needs: a config (with WgAddr being the load-bearing field) and a wgInterface
+// whose UpdateAddr call we can observe.
+func reconcileIPv6Fixture(t *testing.T, initial wgaddr.Address) (*Engine, *MockWGIface, *wgaddr.Address) {
+	t.Helper()
+	var applied wgaddr.Address
+	mock := &MockWGIface{
+		AddressFunc: func() wgaddr.Address { return initial },
+		UpdateAddrFunc: func(a wgaddr.Address) error {
+			applied = a
+			return nil
+		},
+	}
+	ctx, cancel := context.WithCancel(context.Background())
+	t.Cleanup(cancel)
+	e := &Engine{
+		ctx:         ctx,
+		clientCtx:   ctx,
+		clientCancel: cancel,
+		config:      &EngineConfig{WgAddr: initial},
+		wgInterface: mock,
+		syncMsgMux:  &sync.Mutex{},
+	}
+	return e, mock, &applied
+}
+
+func TestReconcileIPv6_FirstAssignment_AppliesInPlace(t *testing.T) {
+	// Embedded clients boot v4-only; management later assigns a v6 overlay.
+	// The fix: apply v6 in place, return reset=false. Pre-fix this case
+	// fell through to the "v6 changed" branch and reset the engine.
+	v4 := wgaddr.MustParseWGAddress("100.64.0.1/16")
+	e, mock, applied := reconcileIPv6Fixture(t, v4)
+
+	v6Prefix := netip.MustParsePrefix("fd00::1/64")
+	conf := &mgmtProto.PeerConfig{
+		Address:    v4.String(),
+		AddressV6:  mustEncodeV6Prefix(t, v6Prefix),
+	}
+
+	reset, err := e.reconcileIPv6(conf)
+	require.NoError(t, err)
+	assert.False(t, reset, "first v6 assignment must NOT request an engine reset")
+
+	require.True(t, e.config.WgAddr.HasIPv6(), "engine config must record the new v6")
+	assert.Equal(t, v6Prefix.Addr(), e.config.WgAddr.IPv6, "engine config v6 address must match")
+	assert.Equal(t, v6Prefix.Masked(), e.config.WgAddr.IPv6Net, "engine config v6 prefix must match")
+
+	require.True(t, applied.HasIPv6(), "WGIface.UpdateAddr must be called with v6 populated")
+	assert.Equal(t, v6Prefix.Addr(), applied.IPv6, "UpdateAddr must carry the new v6")
+	_ = mock
+}
+
+func TestReconcileIPv6_NoChange_NoOp(t *testing.T) {
+	// Steady state: management redelivers the same PeerConfig. No interface
+	// mutation, no reset. Guards against an infinite reset loop if the
+	// comparison ever drifts (e.g. address-vs-prefix masking bugs).
+	v6Prefix := netip.MustParsePrefix("fd00::1/64")
+	addr := wgaddr.MustParseWGAddress("100.64.0.1/16")
+	require.NoError(t, addr.SetIPv6FromCompact(mustEncodeV6Prefix(t, v6Prefix)))
+
+	updateAddrCalled := false
+	mock := &MockWGIface{
+		AddressFunc: func() wgaddr.Address { return addr },
+		UpdateAddrFunc: func(a wgaddr.Address) error {
+			updateAddrCalled = true
+			return nil
+		},
+	}
+	ctx, cancel := context.WithCancel(context.Background())
+	defer cancel()
+	e := &Engine{
+		ctx:         ctx,
+		clientCtx:   ctx,
+		clientCancel: cancel,
+		config:      &EngineConfig{WgAddr: addr},
+		wgInterface: mock,
+		syncMsgMux:  &sync.Mutex{},
+	}
+
+	conf := &mgmtProto.PeerConfig{
+		Address:   addr.String(),
+		AddressV6: mustEncodeV6Prefix(t, v6Prefix),
+	}
+	reset, err := e.reconcileIPv6(conf)
+	require.NoError(t, err)
+	assert.False(t, reset, "unchanged v6 must NOT trigger reset")
+	assert.False(t, updateAddrCalled, "unchanged v6 must NOT call UpdateAddr")
+}
+
+func TestReconcileIPv6_Removed_AppliesInPlace(t *testing.T) {
+	// Management withdraws v6 (e.g. account toggled off the v6 group).
+	// Cleared in place, no reset.
+	v6Prefix := netip.MustParsePrefix("fd00::1/64")
+	addr := wgaddr.MustParseWGAddress("100.64.0.1/16")
+	require.NoError(t, addr.SetIPv6FromCompact(mustEncodeV6Prefix(t, v6Prefix)))
+
+	e, _, applied := reconcileIPv6Fixture(t, addr)
+	e.config.WgAddr = addr
+
+	conf := &mgmtProto.PeerConfig{
+		Address:   addr.String(),
+		AddressV6: nil,
+	}
+	reset, err := e.reconcileIPv6(conf)
+	require.NoError(t, err)
+	assert.False(t, reset, "v6 removed must NOT trigger reset")
+
+	assert.False(t, e.config.WgAddr.HasIPv6(), "engine config must reflect v6 cleared")
+	assert.False(t, applied.HasIPv6(), "UpdateAddr must receive cleared v6")
+}
+
+func TestReconcileIPv6_PrefixLengthChanged_RequestsReset(t *testing.T) {
+	// Same v6 host, different mask (e.g. /64 → /80). Treated like a value
+	// change because the new netmask redefines the broadcast/scope.
+	oldPrefix := netip.MustParsePrefix("fd00::1/64")
+	newPrefix := netip.MustParsePrefix("fd00::1/80")
+
+	addr := wgaddr.MustParseWGAddress("100.64.0.1/16")
+	require.NoError(t, addr.SetIPv6FromCompact(mustEncodeV6Prefix(t, oldPrefix)))
+
+	updateAddrCalled := false
+	mock := &MockWGIface{
+		AddressFunc: func() wgaddr.Address { return addr },
+		UpdateAddrFunc: func(a wgaddr.Address) error {
+			updateAddrCalled = true
+			return nil
+		},
+	}
+	ctx, cancel := context.WithCancel(context.Background())
+	defer cancel()
+	e := &Engine{
+		ctx:          ctx,
+		clientCtx:    ctx,
+		clientCancel: cancel,
+		config:       &EngineConfig{WgAddr: addr},
+		wgInterface:  mock,
+		syncMsgMux:   &sync.Mutex{},
+	}
+
+	conf := &mgmtProto.PeerConfig{
+		Address:   addr.String(),
+		AddressV6: mustEncodeV6Prefix(t, newPrefix),
+	}
+	reset, err := e.reconcileIPv6(conf)
+	require.NoError(t, err)
+	assert.True(t, reset, "v6 prefix length change must request a reset")
+	assert.False(t, updateAddrCalled, "v6 prefix length change must NOT touch the interface")
+}
+
+func TestReconcileIPv6_ValueChanged_RequestsReset(t *testing.T) {
+	// v6 was X, now Y. The netstack backend can't safely swap an existing
+	// address in place — fall back to the engine recreate path.
+	oldPrefix := netip.MustParsePrefix("fd00::1/64")
+	newPrefix := netip.MustParsePrefix("fd00::2/64")
+
+	addr := wgaddr.MustParseWGAddress("100.64.0.1/16")
+	require.NoError(t, addr.SetIPv6FromCompact(mustEncodeV6Prefix(t, oldPrefix)))
+
+	updateAddrCalled := false
+	mock := &MockWGIface{
+		AddressFunc: func() wgaddr.Address { return addr },
+		UpdateAddrFunc: func(a wgaddr.Address) error {
+			updateAddrCalled = true
+			return nil
+		},
+	}
+	ctx, cancel := context.WithCancel(context.Background())
+	defer cancel()
+	e := &Engine{
+		ctx:          ctx,
+		clientCtx:    ctx,
+		clientCancel: cancel,
+		config:       &EngineConfig{WgAddr: addr},
+		wgInterface:  mock,
+		syncMsgMux:   &sync.Mutex{},
+	}
+
+	conf := &mgmtProto.PeerConfig{
+		Address:   addr.String(),
+		AddressV6: mustEncodeV6Prefix(t, newPrefix),
+	}
+	reset, err := e.reconcileIPv6(conf)
+	require.NoError(t, err)
+	assert.True(t, reset, "v6 value change must request a reset")
+	assert.False(t, updateAddrCalled,
+		"v6 value change must NOT call UpdateAddr — caller will recreate the interface")
+}
+
+func TestReconcileIPv6_InvalidBytes_ReturnsError(t *testing.T) {
+	// Corrupt PeerConfig.AddressV6 must not crash the engine and must not
+	// trigger a spurious reset.
+	v4 := wgaddr.MustParseWGAddress("100.64.0.1/16")
+	e, _, applied := reconcileIPv6Fixture(t, v4)
+
+	conf := &mgmtProto.PeerConfig{
+		Address:   v4.String(),
+		AddressV6: []byte{0x00}, // truncated, definitely not a valid prefix
+	}
+	reset, err := e.reconcileIPv6(conf)
+	require.Error(t, err, "malformed v6 bytes must surface an error")
+	assert.False(t, reset, "decode error must NOT request a reset")
+	assert.False(t, applied.HasIPv6(), "decode error must NOT touch the interface")
+}
+
+func TestReconcileIPv6_UpdateAddrError_DoesNotPropagateReset(t *testing.T) {
+	// If WGIface.UpdateAddr fails (e.g. OS-side assignment error on a
+	// kernel device), reconcileIPv6 returns the error to the caller for
+	// logging — but it must NOT request a reset. The whole point of the
+	// fix is to AVOID the reset cascade on v6 transitions.
+	v4 := wgaddr.MustParseWGAddress("100.64.0.1/16")
+	mock := &MockWGIface{
+		AddressFunc:    func() wgaddr.Address { return v4 },
+		UpdateAddrFunc: func(_ wgaddr.Address) error { return errors.New("os refused address") },
+	}
+	ctx, cancel := context.WithCancel(context.Background())
+	defer cancel()
+	e := &Engine{
+		ctx:          ctx,
+		clientCtx:    ctx,
+		clientCancel: cancel,
+		config:       &EngineConfig{WgAddr: v4},
+		wgInterface:  mock,
+		syncMsgMux:   &sync.Mutex{},
+	}
+
+	v6Prefix := netip.MustParsePrefix("fd00::1/64")
+	conf := &mgmtProto.PeerConfig{
+		Address:   v4.String(),
+		AddressV6: mustEncodeV6Prefix(t, v6Prefix),
+	}
+	reset, err := e.reconcileIPv6(conf)
+	require.Error(t, err, "UpdateAddr failure must surface")
+	assert.False(t, reset, "UpdateAddr failure must NOT request a reset")
+}
+
+func TestUpdateConfig_V6FirstAssignment_DoesNotResetEngine(t *testing.T) {
+	// The integration check: updateConfig must not return ErrResetConnection
+	// when the only change between current state and the new PeerConfig is
+	// "v6 added". Pre-fix this returned ErrResetConnection, tearing down
+	// every listener bound on the engine's netstack.
+	v4 := wgaddr.MustParseWGAddress("100.64.0.1/16")
+	mock := &MockWGIface{
+		AddressFunc:        func() wgaddr.Address { return v4 },
+		UpdateAddrFunc:     func(_ wgaddr.Address) error { return nil },
+		IsUserspaceBindFunc: func() bool { return true },
+	}
+	ctx, cancel := context.WithCancel(context.Background())
+	defer cancel()
+	e := &Engine{
+		ctx:            ctx,
+		clientCtx:      ctx,
+		clientCancel:   cancel,
+		config:         &EngineConfig{WgAddr: v4, WgPort: 51820},
+		wgInterface:    mock,
+		syncMsgMux:     &sync.Mutex{},
+		statusRecorder: peer.NewRecorder("https://mgm.test"),
+	}
+
+	v6Prefix := netip.MustParsePrefix("fd00::1/64")
+	conf := &mgmtProto.PeerConfig{
+		Address:   v4.String(),
+		AddressV6: mustEncodeV6Prefix(t, v6Prefix),
+	}
+
+	err := e.updateConfig(conf)
+	assert.NoError(t, err,
+		"updateConfig MUST NOT return ErrResetConnection when v6 is added for the first time — that's the bug fix")
+	assert.NotErrorIs(t, err, ErrResetConnection)
+
+	require.True(t, e.config.WgAddr.HasIPv6(), "engine config must record the assigned v6 after updateConfig")
+	assert.Equal(t, v6Prefix.Addr(), e.config.WgAddr.IPv6)
+}

client/internal/engine_session_deadline_test.go

@@ -1,78 +0,0 @@
-package internal
-
-import (
-	"testing"
-	"time"
-
-	"github.com/stretchr/testify/require"
-	"google.golang.org/protobuf/types/known/timestamppb"
-
-	"github.com/netbirdio/netbird/client/internal/auth/sessionwatch"
-	"github.com/netbirdio/netbird/client/internal/peer"
-)
-
-// TestApplySessionDeadline_ThreeState pins down the 3-state semantics of the
-// wire field carried on LoginResponse / SyncResponse:
-//
-//   - nil pointer            → no info; previously-anchored deadline survives
-//   - explicit zero value    → "expiry disabled" sentinel; both sinks cleared
-//   - valid future timestamp → new deadline propagated to both sinks
-func TestApplySessionDeadline_ThreeState(t *testing.T) {
-	newEngine := func() *Engine {
-		recorder := peer.NewRecorder("")
-		return &Engine{
-			statusRecorder: recorder,
-			sessionWatcher: sessionwatch.New(recorder),
-		}
-	}
-
-	t.Run("valid timestamp sets deadline on both sinks", func(t *testing.T) {
-		e := newEngine()
-		deadline := time.Now().Add(time.Hour).UTC().Truncate(time.Second)
-
-		e.ApplySessionDeadline(timestamppb.New(deadline))
-
-		require.True(t, e.statusRecorder.GetSessionExpiresAt().Equal(deadline),
-			"status recorder should hold the new deadline")
-	})
-
-	t.Run("nil is a no-op and preserves previous deadline", func(t *testing.T) {
-		e := newEngine()
-		seeded := time.Now().Add(time.Hour).UTC().Truncate(time.Second)
-		e.ApplySessionDeadline(timestamppb.New(seeded))
-		require.True(t, e.statusRecorder.GetSessionExpiresAt().Equal(seeded))
-
-		e.ApplySessionDeadline(nil)
-
-		require.True(t, e.statusRecorder.GetSessionExpiresAt().Equal(seeded),
-			"nil snapshot must not disturb the existing deadline")
-	})
-
-	t.Run("explicit zero clears a previously-anchored deadline", func(t *testing.T) {
-		e := newEngine()
-		seeded := time.Now().Add(time.Hour).UTC().Truncate(time.Second)
-		e.ApplySessionDeadline(timestamppb.New(seeded))
-		require.True(t, e.statusRecorder.GetSessionExpiresAt().Equal(seeded))
-
-		// Explicit zero Timestamp{} (seconds=0, nanos=0) is the
-		// "expiry disabled / not SSO" sentinel.
-		e.ApplySessionDeadline(&timestamppb.Timestamp{})
-
-		require.True(t, e.statusRecorder.GetSessionExpiresAt().IsZero(),
-			"explicit zero sentinel must clear the deadline")
-	})
-
-	t.Run("invalid timestamp clears the deadline", func(t *testing.T) {
-		e := newEngine()
-		seeded := time.Now().Add(time.Hour).UTC().Truncate(time.Second)
-		e.ApplySessionDeadline(timestamppb.New(seeded))
-		require.True(t, e.statusRecorder.GetSessionExpiresAt().Equal(seeded))
-
-		// Out-of-range nanos → IsValid()==false; same-meaning as the
-		// disabled sentinel for downstream sinks.
-		e.ApplySessionDeadline(&timestamppb.Timestamp{Seconds: 1, Nanos: -1})
-
-		require.True(t, e.statusRecorder.GetSessionExpiresAt().IsZero(),
-			"invalid timestamp must clear the deadline")
-	})
-}

client/internal/engine_sessionwatch.go

@@ -1,16 +0,0 @@
-//go:build !js
-
-package internal
-
-import (
-	"github.com/netbirdio/netbird/client/internal/auth/sessionwatch"
-	"github.com/netbirdio/netbird/client/internal/peer"
-)
-
-// newSessionWatcher returns the real SSO session expiry watcher for every
-// non-wasm build. The js/wasm build gets a no-op stub from
-// engine_sessionwatch_js.go so the sessionwatch package (and its timer
-// machinery) never links into the wasm binary.
-func newSessionWatcher(recorder *peer.Status) sessionDeadlineWatcher {
-	return sessionwatch.New(recorder)
-}

client/internal/engine_sessionwatch_js.go

@@ -1,39 +0,0 @@
-//go:build js
-
-package internal
-
-import (
-	"time"
-
-	"github.com/netbirdio/netbird/client/internal/peer"
-)
-
-// noopSessionWatcher is the js/wasm stand-in for sessionwatch.Watcher. The
-// wasm client never runs the engine's session-warning flow (the interactive
-// T-WarningLead notification and the T-FinalWarningLead fallback dialog live
-// in the desktop UI), so linking the full sessionwatch package (timers, event
-// composition) would only bloat the binary.
-//
-// It still mirrors the deadline into the status recorder so the SubscribeStatus
-// / Status snapshot the UI consumes stays correct — only the timer-driven
-// warnings are dropped.
-type noopSessionWatcher struct {
-	recorder *peer.Status
-}
-
-func newSessionWatcher(recorder *peer.Status) sessionDeadlineWatcher {
-	return noopSessionWatcher{recorder: recorder}
-}
-
-// Update mirrors the real watcher's recorder propagation without the timers or
-// sanity-check sentinels: a valid deadline is exposed on the status snapshot,
-// the zero time clears it.
-func (w noopSessionWatcher) Update(deadline time.Time) error {
-	if w.recorder != nil {
-		w.recorder.SetSessionExpiresAt(deadline)
-	}
-	return nil
-}
-
-func (noopSessionWatcher) Dismiss() {}
-func (noopSessionWatcher) Close()   {}

client/internal/engine_test.go

@@ -66,7 +66,6 @@ import (
 	"github.com/netbirdio/netbird/route"
 	mgmt "github.com/netbirdio/netbird/shared/management/client"
 	mgmtProto "github.com/netbirdio/netbird/shared/management/proto"
-	"github.com/netbirdio/netbird/shared/netiputil"
 	relayClient "github.com/netbirdio/netbird/shared/relay/client"
 	signal "github.com/netbirdio/netbird/shared/signal/client"
 	"github.com/netbirdio/netbird/shared/signal/proto"
@@ -1707,82 +1706,12 @@ func getPeers(e *Engine) int {
 	return len(e.peerStore.PeersPubKey())
 }
 
-func mustEncodePrefix(t *testing.T, p netip.Prefix) []byte {
-	t.Helper()
-	b, err := netiputil.EncodePrefix(p)
-	require.NoError(t, err)
-	return b
-}
-
-func TestEngine_hasIPv6Changed(t *testing.T) {
-	v4Only := wgaddr.MustParseWGAddress("100.64.0.1/16")
-
-	v4v6 := wgaddr.MustParseWGAddress("100.64.0.1/16")
-	v4v6.IPv6 = netip.MustParseAddr("fd00::1")
-	v4v6.IPv6Net = netip.MustParsePrefix("fd00::1/64").Masked()
-
-	tests := []struct {
-		name     string
-		current  wgaddr.Address
-		confV6   []byte
-		expected bool
-	}{
-		{
-			name:     "no v6 before, no v6 now",
-			current:  v4Only,
-			confV6:   nil,
-			expected: false,
-		},
-		{
-			name:     "no v6 before, v6 added",
-			current:  v4Only,
-			confV6:   mustEncodePrefix(t, netip.MustParsePrefix("fd00::1/64")),
-			expected: true,
-		},
-		{
-			name:     "had v6, now removed",
-			current:  v4v6,
-			confV6:   nil,
-			expected: true,
-		},
-		{
-			name:     "had v6, same v6",
-			current:  v4v6,
-			confV6:   mustEncodePrefix(t, netip.MustParsePrefix("fd00::1/64")),
-			expected: false,
-		},
-		{
-			name:     "had v6, different v6",
-			current:  v4v6,
-			confV6:   mustEncodePrefix(t, netip.MustParsePrefix("fd00::2/64")),
-			expected: true,
-		},
-		{
-			name:     "same v6 addr, different prefix length",
-			current:  v4v6,
-			confV6:   mustEncodePrefix(t, netip.MustParsePrefix("fd00::1/80")),
-			expected: true,
-		},
-		{
-			name:     "decode error keeps status quo",
-			current:  v4Only,
-			confV6:   []byte{1, 2, 3},
-			expected: false,
-		},
-	}
-
-	for _, tt := range tests {
-		t.Run(tt.name, func(t *testing.T) {
-			engine := &Engine{
-				config: &EngineConfig{WgAddr: tt.current},
-			}
-			conf := &mgmtProto.PeerConfig{
-				AddressV6: tt.confV6,
-			}
-			assert.Equal(t, tt.expected, engine.hasIPv6Changed(conf))
-		})
-	}
-}
+// The former TestEngine_hasIPv6Changed has been superseded by
+// engine_reconcileipv6_test.go — the underlying function (hasIPv6Changed)
+// was replaced by reconcileIPv6, which applies "v6 added" / "v6 removed"
+// in place instead of demanding a full engine reset. The behavioral
+// matrix the old test enforced is now covered, with corrected expectations,
+// by TestReconcileIPv6_* in that sibling file.
 
 func TestFilterAllowedIPs(t *testing.T) {
 	v4v6Addr := wgaddr.MustParseWGAddress("100.64.0.1/16")

client/internal/lazyconn/support.go

@@ -4,6 +4,8 @@ import (
 	"strings"
 
 	"github.com/hashicorp/go-version"
+
+	nbversion "github.com/netbirdio/netbird/version"
 )
 
 var (
@@ -11,7 +13,7 @@ var (
 )
 
 func IsSupported(agentVersion string) bool {
-	if agentVersion == "development" {
+	if nbversion.IsDevelopmentVersion(agentVersion) {
 		return true
 	}
 

client/internal/peer/conn_status.go

@@ -26,7 +26,6 @@ type connStatusInputs struct {
 	iceInProgress       bool // a negotiation is currently in flight
 }
 
-
 // ConnStatus describe the status of a peer's connection
 type ConnStatus int32
 

client/internal/peer/status.go

@@ -5,10 +5,8 @@ import (
 	"errors"
 	"fmt"
 	"net/netip"
-	"runtime"
 	"slices"
 	"sync"
-	"sync/atomic"
 	"time"
 
 	"github.com/google/uuid"
@@ -113,6 +111,7 @@ type LocalPeerState struct {
 	PubKey          string
 	KernelInterface bool
 	FQDN            string
+	WgPort          int
 	Routes          map[string]struct{}
 }
 
@@ -192,27 +191,22 @@ func (s *StatusChangeSubscription) Events() chan map[string]RouterState {
 // every private-service request) don't contend against each other.
 // Pure read methods take RLock; anything that mutates state takes Lock.
 type Status struct {
-	mux                 sync.RWMutex
-	peers               map[string]State
-	changeNotify        map[string]map[string]*StatusChangeSubscription // map[peerID]map[subscriptionID]*StatusChangeSubscription
-	signalState         bool
-	signalError         error
-	managementState     bool
-	managementError     error
-	relayStates         []relay.ProbeResult
-	localPeer           LocalPeerState
-	offlinePeers        []State
-	mgmAddress          string
-	signalAddress       string
-	notifier            *notifier
-	rosenpassEnabled    bool
-	rosenpassPermissive bool
-	// sessionExpiresAt is the absolute UTC instant at which the peer's SSO
-	// session expires. Zero when the peer is not SSO-tracked or login
-	// expiration is disabled. Populated from management LoginResponse /
-	// SyncResponse and exposed via the daemon's Status / SubscribeStatus RPC
-	// so the UI can show remaining time without itself talking to mgm.
-	sessionExpiresAt      time.Time
+	mux                   sync.RWMutex
+	peers                 map[string]State
+	ipToKey               map[string]string
+	changeNotify          map[string]map[string]*StatusChangeSubscription // map[peerID]map[subscriptionID]*StatusChangeSubscription
+	signalState           bool
+	signalError           error
+	managementState       bool
+	managementError       error
+	relayStates           []relay.ProbeResult
+	localPeer             LocalPeerState
+	offlinePeers          []State
+	mgmAddress            string
+	signalAddress         string
+	notifier              *notifier
+	rosenpassEnabled      bool
+	rosenpassPermissive   bool
 	nsGroupStates         []NSGroupState
 	resolvedDomainsStates map[domain.Domain]ResolvedDomainInfo
 	lazyConnectionEnabled bool
@@ -228,21 +222,6 @@ type Status struct {
 	eventStreams map[string]chan *proto.SystemEvent
 	eventQueue   *EventQueue
 
-	// stateChangeStreams fan-out connection-state changes (connected /
-	// disconnected / connecting / address change / peers list change) to
-	// every active SubscribeStatus gRPC stream. Each subscriber gets a
-	// buffered chan; the notifier non-blockingly pings them so a slow
-	// consumer can never stall the daemon.
-	stateChangeMux     sync.Mutex
-	stateChangeStreams map[string]chan struct{}
-
-	// networksRevision bumps whenever the routed-networks set or their
-	// selected state changes (driven by the route manager). Surfaced in the
-	// status snapshot so the UI can fingerprint on it and re-fetch
-	// ListNetworks only on a real change. Atomic so the snapshot builder can
-	// read it without taking mux.
-	networksRevision atomic.Uint64
-
 	ingressGwMgr *ingressgw.Manager
 
 	routeIDLookup routeIDLookup
@@ -253,10 +232,10 @@ type Status struct {
 func NewRecorder(mgmAddress string) *Status {
 	return &Status{
 		peers:                 make(map[string]State),
+		ipToKey:               make(map[string]string),
 		changeNotify:          make(map[string]map[string]*StatusChangeSubscription),
 		eventStreams:          make(map[string]chan *proto.SystemEvent),
 		eventQueue:            NewEventQueue(eventQueueSize),
-		stateChangeStreams:    make(map[string]chan struct{}),
 		offlinePeers:          make([]State, 0),
 		notifier:              newNotifier(),
 		mgmAddress:            mgmAddress,
@@ -305,6 +284,12 @@ func (d *Status) AddPeer(peerPubKey string, fqdn string, ip string, ipv6 string)
 		Mux:        new(sync.RWMutex),
 	}
 	d.peerListChangedForNotification = true
+	if ipv6 != "" {
+		d.ipToKey[ipv6] = peerPubKey
+	}
+	if ip != "" {
+		d.ipToKey[ip] = peerPubKey
+	}
 	return nil
 }
 
@@ -334,19 +319,22 @@ func (d *Status) PeerByIP(ip string) (string, bool) {
 
 // PeerStateByIP returns the full peer State for the given tunnel IP.
 // Matches against either the IPv4 (State.IP) or IPv6 (State.IPv6) tunnel
-// address so dual-stack peers are reachable on either family. Returns the
-// zero State and false when no peer matches or the input is empty.
+// address so dual-stack peers are reachable on either family. Only
+// active peers are matched; peers moved into the offline slice by
+// ReplaceOfflinePeers are intentionally treated as unknown.
 func (d *Status) PeerStateByIP(ip string) (State, bool) {
 	if ip == "" {
 		return State{}, false
 	}
 	d.mux.RLock()
 	defer d.mux.RUnlock()
-
-	for _, state := range d.peers {
-		if (state.IP != "" && state.IP == ip) || (state.IPv6 != "" && state.IPv6 == ip) {
-			return state, true
-		}
+	key, ok := d.ipToKey[ip]
+	if !ok {
+		return State{}, false
+	}
+	state, ok := d.peers[key]
+	if ok {
+		return state, true
 	}
 	return State{}, false
 }
@@ -356,12 +344,18 @@ func (d *Status) RemovePeer(peerPubKey string) error {
 	d.mux.Lock()
 	defer d.mux.Unlock()
 
-	_, ok := d.peers[peerPubKey]
+	p, ok := d.peers[peerPubKey]
 	if !ok {
 		return errors.New("no peer with to remove")
 	}
 
 	delete(d.peers, peerPubKey)
+	if mappedKey, exists := d.ipToKey[p.IP]; exists && mappedKey == peerPubKey {
+		delete(d.ipToKey, p.IP)
+	}
+	if mappedKey, exists := d.ipToKey[p.IPv6]; exists && mappedKey == peerPubKey {
+		delete(d.ipToKey, p.IPv6)
+	}
 	d.peerListChangedForNotification = true
 	return nil
 }
@@ -406,7 +400,6 @@ func (d *Status) UpdatePeerState(receivedState State) error {
 	if notifyRouter {
 		d.dispatchRouterPeers(receivedState.PubKey, routerSnapshot)
 	}
-	d.notifyStateChange()
 	return nil
 }
 
@@ -432,7 +425,6 @@ func (d *Status) AddPeerStateRoute(peer string, route string, resourceId route.R
 
 	// todo: consider to make sense of this notification or not
 	d.notifier.peerListChanged(numPeers)
-	d.notifyStateChange()
 	return nil
 }
 
@@ -458,7 +450,6 @@ func (d *Status) RemovePeerStateRoute(peer string, route string) error {
 
 	// todo: consider to make sense of this notification or not
 	d.notifier.peerListChanged(numPeers)
-	d.notifyStateChange()
 	return nil
 }
 
@@ -508,7 +499,6 @@ func (d *Status) UpdatePeerICEState(receivedState State) error {
 	if notifyRouter {
 		d.dispatchRouterPeers(receivedState.PubKey, routerSnapshot)
 	}
-	d.notifyStateChange()
 	return nil
 }
 
@@ -545,7 +535,6 @@ func (d *Status) UpdatePeerRelayedState(receivedState State) error {
 	if notifyRouter {
 		d.dispatchRouterPeers(receivedState.PubKey, routerSnapshot)
 	}
-	d.notifyStateChange()
 	return nil
 }
 
@@ -581,7 +570,6 @@ func (d *Status) UpdatePeerRelayedStateToDisconnected(receivedState State) error
 	if notifyRouter {
 		d.dispatchRouterPeers(receivedState.PubKey, routerSnapshot)
 	}
-	d.notifyStateChange()
 	return nil
 }
 
@@ -620,7 +608,6 @@ func (d *Status) UpdatePeerICEStateToDisconnected(receivedState State) error {
 	if notifyRouter {
 		d.dispatchRouterPeers(receivedState.PubKey, routerSnapshot)
 	}
-	d.notifyStateChange()
 	return nil
 }
 
@@ -714,7 +701,6 @@ func (d *Status) FinishPeerListModifications() {
 	for _, rd := range dispatches {
 		d.dispatchRouterPeers(rd.peerID, rd.snapshot)
 	}
-	d.notifyStateChange()
 }
 
 func (d *Status) SubscribeToPeerStateChanges(ctx context.Context, peerID string) *StatusChangeSubscription {
@@ -773,41 +759,6 @@ func (d *Status) UpdateLocalPeerState(localPeerState LocalPeerState) {
 	d.mux.Unlock()
 
 	d.notifier.localAddressChanged(fqdn, ip)
-	d.notifyStateChange()
-}
-
-// SetSessionExpiresAt records the absolute UTC instant at which the peer's
-// SSO session is set to expire. Pass the zero value to clear (e.g. when the
-// management server stops publishing a deadline because login expiration was
-// disabled or the peer is not SSO-tracked). Same-value updates are no-ops;
-// real changes fan out via notifyStateChange so SubscribeStatus consumers
-// pick up the new deadline on their next read.
-func (d *Status) SetSessionExpiresAt(deadline time.Time) {
-	d.mux.Lock()
-	if d.sessionExpiresAt.Equal(deadline) {
-		d.mux.Unlock()
-		return
-	}
-	d.sessionExpiresAt = deadline
-	d.mux.Unlock()
-	d.notifyStateChange()
-}
-
-// GetSessionExpiresAt returns the most recently recorded SSO session deadline,
-// or the zero value when no deadline is tracked. A deadline that has already
-// slipped into the past reports as "none": once the session has expired it is
-// no longer a meaningful countdown, and the sessionwatch.Watcher does not
-// arm a timer at the deadline itself to clear it (only the two pre-expiry
-// warnings). Without this guard the UI would keep painting a stale
-// "expires in …" against a moment that has passed until the next login,
-// extend, or teardown rewrote the value.
-func (d *Status) GetSessionExpiresAt() time.Time {
-	d.mux.Lock()
-	defer d.mux.Unlock()
-	if !d.sessionExpiresAt.IsZero() && d.sessionExpiresAt.Before(time.Now()) {
-		return time.Time{}
-	}
-	return d.sessionExpiresAt
 }
 
 // AddLocalPeerStateRoute adds a route to the local peer state
@@ -876,19 +827,11 @@ func (d *Status) CleanLocalPeerState() {
 	d.mux.Unlock()
 
 	d.notifier.localAddressChanged(fqdn, ip)
-	d.notifyStateChange()
 }
 
 // MarkManagementDisconnected sets ManagementState to disconnected
 func (d *Status) MarkManagementDisconnected(err error) {
 	d.mux.Lock()
-	// Health checks re-mark the same state on every probe; skip the fan-out
-	// when nothing actually changed so we don't flood SubscribeStatus
-	// consumers with identical snapshots.
-	if !d.managementState && errors.Is(d.managementError, err) {
-		d.mux.Unlock()
-		return
-	}
 	d.managementState = false
 	d.managementError = err
 	mgm := d.managementState
@@ -896,16 +839,11 @@ func (d *Status) MarkManagementDisconnected(err error) {
 	d.mux.Unlock()
 
 	d.notifier.updateServerStates(mgm, sig)
-	d.notifyStateChange()
 }
 
 // MarkManagementConnected sets ManagementState to connected
 func (d *Status) MarkManagementConnected() {
 	d.mux.Lock()
-	if d.managementState && d.managementError == nil {
-		d.mux.Unlock()
-		return
-	}
 	d.managementState = true
 	d.managementError = nil
 	mgm := d.managementState
@@ -913,7 +851,6 @@ func (d *Status) MarkManagementConnected() {
 	d.mux.Unlock()
 
 	d.notifier.updateServerStates(mgm, sig)
-	d.notifyStateChange()
 }
 
 // UpdateSignalAddress update the address of the signal server
@@ -947,10 +884,6 @@ func (d *Status) UpdateLazyConnection(enabled bool) {
 // MarkSignalDisconnected sets SignalState to disconnected
 func (d *Status) MarkSignalDisconnected(err error) {
 	d.mux.Lock()
-	if !d.signalState && errors.Is(d.signalError, err) {
-		d.mux.Unlock()
-		return
-	}
 	d.signalState = false
 	d.signalError = err
 	mgm := d.managementState
@@ -958,16 +891,11 @@ func (d *Status) MarkSignalDisconnected(err error) {
 	d.mux.Unlock()
 
 	d.notifier.updateServerStates(mgm, sig)
-	d.notifyStateChange()
 }
 
 // MarkSignalConnected sets SignalState to connected
 func (d *Status) MarkSignalConnected() {
 	d.mux.Lock()
-	if d.signalState && d.signalError == nil {
-		d.mux.Unlock()
-		return
-	}
 	d.signalState = true
 	d.signalError = nil
 	mgm := d.managementState
@@ -975,7 +903,6 @@ func (d *Status) MarkSignalConnected() {
 	d.mux.Unlock()
 
 	d.notifier.updateServerStates(mgm, sig)
-	d.notifyStateChange()
 }
 
 func (d *Status) UpdateRelayStates(relayResults []relay.ProbeResult) {
@@ -1097,14 +1024,17 @@ func (d *Status) GetRelayStates() []relay.ProbeResult {
 		return d.relayStates
 	}
 
-	// extend the list of stun, turn servers with relay address
+	// extend the list of stun, turn servers with the relay server connections
 	relayStates := slices.Clone(d.relayStates)
 
-	// if the server connection is not established then we will use the general address
-	// in case of connection we will use the instance specific address
-	instanceAddr, _, err := d.relayMgr.RelayInstanceAddress()
-	if err != nil {
-		// TODO add their status
+	states := d.relayMgr.RelayStates()
+	if len(states) == 0 {
+		// no relay connection tracked yet; surface configured servers as
+		// unavailable with the real reconnect error when known
+		err := relayClient.ErrRelayClientNotConnected
+		if connErr := d.relayMgr.RelayConnectError(); connErr != nil {
+			err = connErr
+		}
 		for _, r := range d.relayMgr.ServerURLs() {
 			relayStates = append(relayStates, relay.ProbeResult{
 				URI: r,
@@ -1114,10 +1044,14 @@ func (d *Status) GetRelayStates() []relay.ProbeResult {
 		return relayStates
 	}
 
-	relayState := relay.ProbeResult{
-		URI: instanceAddr,
+	for _, rs := range states {
+		relayStates = append(relayStates, relay.ProbeResult{
+			URI:       rs.URL,
+			Err:       rs.Err,
+			Transport: rs.Transport,
+		})
 	}
-	return append(relayStates, relayState)
+	return relayStates
 }
 
 func (d *Status) ForwardingRules() []firewall.ForwardRule {
@@ -1173,19 +1107,16 @@ func (d *Status) GetFullStatus() FullStatus {
 // ClientStart will notify all listeners about the new service state
 func (d *Status) ClientStart() {
 	d.notifier.clientStart()
-	d.notifyStateChange()
 }
 
 // ClientStop will notify all listeners about the new service state
 func (d *Status) ClientStop() {
 	d.notifier.clientStop()
-	d.notifyStateChange()
 }
 
 // ClientTeardown will notify all listeners about the service is under teardown
 func (d *Status) ClientTeardown() {
 	d.notifier.clientTearDown()
-	d.notifyStateChange()
 }
 
 // SetConnectionListener set a listener to the notifier
@@ -1327,82 +1258,6 @@ func (d *Status) GetEventHistory() []*proto.SystemEvent {
 	return d.eventQueue.GetAll()
 }
 
-// SubscribeToStateChanges hands back a channel that receives a tick on
-// every connection-state change (connected / disconnected / connecting /
-// address change / peers-list change). The channel is buffered to one
-// pending tick so a coalesced burst still wakes the consumer exactly
-// once. Pass the returned id to UnsubscribeFromStateChanges to detach.
-func (d *Status) SubscribeToStateChanges() (string, <-chan struct{}) {
-	d.stateChangeMux.Lock()
-	defer d.stateChangeMux.Unlock()
-
-	id := uuid.New().String()
-	ch := make(chan struct{}, 1)
-	d.stateChangeStreams[id] = ch
-	return id, ch
-}
-
-// UnsubscribeFromStateChanges releases a SubscribeToStateChanges channel
-// and closes it so any consumer goroutine selecting on the channel
-// unblocks cleanly.
-func (d *Status) UnsubscribeFromStateChanges(id string) {
-	d.stateChangeMux.Lock()
-	defer d.stateChangeMux.Unlock()
-
-	if ch, ok := d.stateChangeStreams[id]; ok {
-		close(ch)
-		delete(d.stateChangeStreams, id)
-	}
-}
-
-// notifyStateChange wakes every SubscribeToStateChanges subscriber. Drops
-// the tick if a subscriber's buffer is full — by definition the consumer
-// is already going to fetch the latest snapshot, so multiple pending ticks
-// would be redundant.
-func (d *Status) notifyStateChange() {
-	if _, file, line, ok := runtime.Caller(1); ok {
-		log.Infof("--- notifyStateChange from %s:%d", file, line)
-	}
-	d.stateChangeMux.Lock()
-	defer d.stateChangeMux.Unlock()
-
-	for _, ch := range d.stateChangeStreams {
-		select {
-		case ch <- struct{}{}:
-		default:
-		}
-	}
-}
-
-// NotifyStateChange is the public wake-the-subscribers entry point used by
-// callers that mutate state outside the peer recorder — most importantly
-// the connect-state machine, which writes StatusNeedsLogin into the
-// shared contextState (client/internal/state.go) without touching any
-// recorder field. Without this push the SubscribeStatus stream stays on
-// the previous snapshot until an unrelated peer/management/signal
-// change happens to fire notifyStateChange, leaving the UI's status
-// out of sync with the daemon.
-func (d *Status) NotifyStateChange() {
-	d.notifyStateChange()
-}
-
-// BumpNetworksRevision increments the routed-networks revision and wakes every
-// SubscribeStatus subscriber. The route manager calls it when a network map
-// changes the available routes or when a selection is applied — the peer
-// status itself only records actively-routed (chosen) networks, so without
-// this bump a candidate route appearing/disappearing would never reach the UI.
-func (d *Status) BumpNetworksRevision() {
-	d.networksRevision.Add(1)
-	d.notifyStateChange()
-}
-
-// GetNetworksRevision returns the current routed-networks revision, surfaced in
-// the status snapshot so the UI can detect route/selection changes (see
-// BumpNetworksRevision).
-func (d *Status) GetNetworksRevision() uint64 {
-	return d.networksRevision.Load()
-}
-
 func (d *Status) SetWgIface(wgInterface WGIfaceStatus) {
 	d.mux.Lock()
 	defer d.mux.Unlock()
@@ -1518,6 +1373,7 @@ func (fs FullStatus) ToProto() *proto.FullStatus {
 	pbFullStatus.LocalPeerState.PubKey = fs.LocalPeerState.PubKey
 	pbFullStatus.LocalPeerState.KernelInterface = fs.LocalPeerState.KernelInterface
 	pbFullStatus.LocalPeerState.Fqdn = fs.LocalPeerState.FQDN
+	pbFullStatus.LocalPeerState.WgPort = int32(fs.LocalPeerState.WgPort)
 	pbFullStatus.LocalPeerState.RosenpassPermissive = fs.RosenpassState.Permissive
 	pbFullStatus.LocalPeerState.RosenpassEnabled = fs.RosenpassState.Enabled
 	pbFullStatus.NumberOfForwardingRules = int32(fs.NumOfForwardingRules)
@@ -1556,6 +1412,7 @@ func (fs FullStatus) ToProto() *proto.FullStatus {
 		pbRelayState := &proto.RelayState{
 			URI:       relayState.URI,
 			Available: relayState.Err == nil,
+			Transport: relayState.Transport,
 		}
 		if err := relayState.Err; err != nil {
 			pbRelayState.Error = err.Error()

client/internal/peer/status_test.go

@@ -90,6 +90,45 @@ func TestStatus_PeerStateByIP_MatchesIPv6(t *testing.T) {
 	req.Equal("pk-1", state.PubKey, "matching state must carry the right pub key")
 }
 
+// TestStatus_PeerStateByIP_IgnoresOfflinePeers documents that peers
+// moved into the offline slice via ReplaceOfflinePeers are intentionally
+// not resolvable by IP: only active peers can carry traffic, so callers
+// (DNS filter, embed.Client.IdentityForIP) treat them as unknown.
+func TestStatus_PeerStateByIP_IgnoresOfflinePeers(t *testing.T) {
+	status := NewRecorder("https://mgm")
+	req := require.New(t)
+
+	status.ReplaceOfflinePeers([]State{
+		{PubKey: "pk-offline", FQDN: "offline.netbird", IP: "100.64.0.20", IPv6: "fd00::20"},
+	})
+
+	_, ok := status.PeerStateByIP("100.64.0.20")
+	req.False(ok, "offline peer must not resolve by IPv4 tunnel address")
+
+	_, ok = status.PeerStateByIP("fd00::20")
+	req.False(ok, "offline peer must not resolve by IPv6 tunnel address")
+}
+
+// TestStatus_PeerStateByIP_RemovedPeer verifies RemovePeer drops the
+// IP index entries for both address families.
+func TestStatus_PeerStateByIP_RemovedPeer(t *testing.T) {
+	status := NewRecorder("https://mgm")
+	req := require.New(t)
+
+	req.NoError(status.AddPeer("pk-1", "peer-1.netbird", "100.64.0.10", "fd00::1"))
+
+	_, ok := status.PeerStateByIP("100.64.0.10")
+	req.True(ok, "active peer must resolve before removal")
+
+	req.NoError(status.RemovePeer("pk-1"))
+
+	_, ok = status.PeerStateByIP("100.64.0.10")
+	req.False(ok, "removed peer must not resolve by IPv4 tunnel address")
+
+	_, ok = status.PeerStateByIP("fd00::1")
+	req.False(ok, "removed peer must not resolve by IPv6 tunnel address")
+}
+
 func TestStatus_UpdatePeerFQDN(t *testing.T) {
 	key := "abc"
 	fqdn := "peer-a.netbird.local"
@@ -275,39 +314,3 @@ func TestGetFullStatus(t *testing.T) {
 	assert.Equal(t, signalState, fullStatus.SignalState, "signal status should be equal")
 	assert.ElementsMatch(t, []State{peerState1, peerState2}, fullStatus.Peers, "peers states should match")
 }
-
-// notified reports whether a state-change tick is pending on ch, draining it.
-func notified(ch <-chan struct{}) bool {
-	select {
-	case <-ch:
-		return true
-	default:
-		return false
-	}
-}
-
-func TestMarkServerStateDoesNotNotifyWhenUnchanged(t *testing.T) {
-	status := NewRecorder("https://mgm")
-	_, ch := status.SubscribeToStateChanges()
-
-	// First transition is a real change and must notify.
-	status.MarkManagementConnected()
-	require.True(t, notified(ch), "first connect should notify")
-
-	// Re-marking the same state must not notify again.
-	status.MarkManagementConnected()
-	assert.False(t, notified(ch), "redundant connect should not notify")
-
-	// Same for signal.
-	status.MarkSignalConnected()
-	require.True(t, notified(ch), "first signal connect should notify")
-	status.MarkSignalConnected()
-	assert.False(t, notified(ch), "redundant signal connect should not notify")
-
-	// A genuine change (disconnect with an error) notifies again.
-	err := errors.New("boom")
-	status.MarkManagementDisconnected(err)
-	require.True(t, notified(ch), "disconnect should notify")
-	status.MarkManagementDisconnected(err)
-	assert.False(t, notified(ch), "redundant disconnect should not notify")
-}

client/internal/peer/worker_ice.go

@@ -4,7 +4,6 @@ import (
 	"context"
 	"fmt"
 	"net"
-	"net/netip"
 	"strconv"
 	"sync"
 	"time"
@@ -165,10 +164,6 @@ func (w *WorkerICE) OnRemoteCandidate(candidate ice.Candidate, haRoutes route.HA
 		return
 	}
 
-	if candidateViaRoutes(candidate, haRoutes) {
-		return
-	}
-
 	if err := w.agent.AddRemoteCandidate(candidate); err != nil {
 		w.log.Errorf("error while handling remote candidate")
 		return
@@ -589,34 +584,6 @@ func extraSrflxCandidate(candidate ice.Candidate) (*ice.CandidateServerReflexive
 	return ec, nil
 }
 
-func candidateViaRoutes(candidate ice.Candidate, clientRoutes route.HAMap) bool {
-	addr, err := netip.ParseAddr(candidate.Address())
-	if err != nil {
-		log.Errorf("Failed to parse IP address %s: %v", candidate.Address(), err)
-		return false
-	}
-
-	var routePrefixes []netip.Prefix
-	for _, routes := range clientRoutes {
-		if len(routes) > 0 && routes[0] != nil {
-			routePrefixes = append(routePrefixes, routes[0].Network)
-		}
-	}
-
-	for _, prefix := range routePrefixes {
-		// default route is handled by route exclusion / ip rules
-		if prefix.Bits() == 0 {
-			continue
-		}
-
-		if prefix.Contains(addr) {
-			log.Debugf("Ignoring candidate [%s], its address is part of routed network %s", candidate.String(), prefix)
-			return true
-		}
-	}
-	return false
-}
-
 func isRelayCandidate(candidate ice.Candidate) bool {
 	return candidate.Type() == ice.CandidateTypeRelay
 }

client/internal/profilemanager/config.go

@@ -22,6 +22,7 @@ import (
 
 	"github.com/netbirdio/netbird/client/iface"
 	"github.com/netbirdio/netbird/client/internal/routemanager/dynamic"
+	"github.com/netbirdio/netbird/client/mdm"
 	"github.com/netbirdio/netbird/client/ssh"
 	mgm "github.com/netbirdio/netbird/shared/management/client"
 	"github.com/netbirdio/netbird/shared/management/domain"
@@ -57,6 +58,10 @@ var DefaultInterfaceBlacklist = []string{
 	"Tailscale", "tailscale", "docker", "veth", "br-", "lo",
 }
 
+// loadMDMPolicy is the package-level indirection used by apply() to read the
+// active MDM policy. Tests override this to inject a fake policy.
+var loadMDMPolicy = mdm.LoadPolicy
+
 // ConfigInput carries configuration changes to the client
 type ConfigInput struct {
 	ManagementURL                 string
@@ -103,6 +108,10 @@ type ConfigInput struct {
 
 // Config Configuration type
 type Config struct {
+	// Name is the human-readable profile name shown in CLI/UI listings.
+	// It is independent of the profile's on-disk filename (which is the ID).
+	Name string
+
 	// Wireguard private key of local peer
 	PrivateKey                    string
 	PreSharedKey                  string
@@ -174,6 +183,23 @@ type Config struct {
 	LazyConnectionEnabled bool
 
 	MTU uint16
+
+	// policy is the MDM policy that produced the currently-set values for
+	// any MDM-enforced fields. Set by applyMDMPolicy at the tail of apply()
+	// and reset on every apply() invocation. Never persisted to disk.
+	// Callers query enforcement state via Policy() and the mdm.Policy API
+	// (HasKey, ManagedKeys, IsEmpty).
+	policy *mdm.Policy `json:"-"`
+}
+
+// Policy returns the MDM policy applied to this Config. Returns a non-nil
+// empty Policy when MDM enforcement is inactive; callers can always invoke
+// HasKey / ManagedKeys / IsEmpty without a nil check.
+func (config *Config) Policy() *mdm.Policy {
+	if config == nil || config.policy == nil {
+		return mdm.NewPolicy(nil)
+	}
+	return config.policy
 }
 
 var ConfigDirOverride string
@@ -248,6 +274,16 @@ func createNewConfig(input ConfigInput) (*Config, error) {
 }
 
 func (config *Config) apply(input ConfigInput) (updated bool, err error) {
+	if config.Name != "" {
+		sanitized, err := sanitizeDisplayName(config.Name)
+		if err != nil {
+			return false, fmt.Errorf("invalid profile name: %w", err)
+		}
+		if sanitized != config.Name {
+			config.Name = sanitized
+			updated = true
+		}
+	}
 	if config.ManagementURL == nil {
 		log.Infof("using default Management URL %s", DefaultManagementURL)
 		config.ManagementURL, err = parseURL("Management URL", DefaultManagementURL)
@@ -612,10 +648,93 @@ func (config *Config) apply(input ConfigInput) (updated bool, err error) {
 		updated = true
 	}
 
+	// MDM is the last override layer: any key present in the policy
+	// supersedes defaults, on-disk config, env vars and CLI input.
+	config.applyMDMPolicy(loadMDMPolicy())
+
 	return updated, nil
 }
 
-// parseURL parses and validates a service URL
+// applyMDMPolicy overlays MDM-supplied values on top of the resolved Config.
+// The provided Policy is also stored on the Config so callers can later query
+// which fields are enforced. Invalid values (e.g. malformed URLs) are logged
+// and skipped to avoid bricking the client; the field keeps its previous
+// resolved value but is still marked as managed (Policy.HasKey returns true
+// for the key, so per-field rejection of user writes still applies).
+func (config *Config) applyMDMPolicy(policy *mdm.Policy) {
+	config.policy = policy
+	if policy.IsEmpty() {
+		return
+	}
+
+	// Helper: log the application of a single MDM-managed key. Values for
+	// keys in mdm.SecretKeys are redacted.
+	logApplied := func(key string, displayValue any) {
+		if _, secret := mdm.SecretKeys[key]; secret {
+			log.Infof("MDM override %s = ********** (secret)", key)
+			return
+		}
+		log.Infof("MDM override %s = %v", key, displayValue)
+	}
+
+	if v, ok := policy.GetString(mdm.KeyManagementURL); ok {
+		if u, err := parseURL("Management URL", v); err != nil {
+			log.Warnf("MDM management URL %q invalid: %v; keeping previous value", v, err)
+		} else {
+			config.ManagementURL = u
+			logApplied(mdm.KeyManagementURL, u.String())
+		}
+	}
+
+	if v, ok := policy.GetString(mdm.KeyPreSharedKey); ok {
+		// Defensive: refuse the redaction mask in case it round-tripped
+		// through a manifest by mistake.
+		if !isPreSharedKeyHidden(&v) {
+			config.PreSharedKey = v
+			logApplied(mdm.KeyPreSharedKey, "")
+		}
+	}
+
+	// applyBool collapses the per-key "read + set + log" boilerplate
+	// for every plain bool MDM key into a single helper. Keeps the
+	// outer function's cognitive complexity below SonarCube's
+	// threshold; functional behaviour is identical to the inlined
+	// branches it replaces.
+	applyBool := func(key string, setter func(bool)) {
+		v, ok := policy.GetBool(key)
+		if !ok {
+			return
+		}
+		setter(v)
+		logApplied(key, v)
+	}
+
+	applyBool(mdm.KeyAllowServerSSH, func(v bool) { bv := v; config.ServerSSHAllowed = &bv })
+	applyBool(mdm.KeyDisableClientRoutes, func(v bool) { config.DisableClientRoutes = v })
+	applyBool(mdm.KeyDisableServerRoutes, func(v bool) { config.DisableServerRoutes = v })
+	applyBool(mdm.KeyBlockInbound, func(v bool) { config.BlockInbound = v })
+	applyBool(mdm.KeyDisableAutoConnect, func(v bool) { config.DisableAutoConnect = v })
+	applyBool(mdm.KeyRosenpassEnabled, func(v bool) { config.RosenpassEnabled = v })
+	applyBool(mdm.KeyRosenpassPermissive, func(v bool) { config.RosenpassPermissive = v })
+
+	if v, ok := policy.GetInt(mdm.KeyWireguardPort); ok {
+		// REG_DWORD is 32-bit; UDP port range is 1-65535. Clamp at the
+		// upper bound and reject obviously-invalid values to avoid the
+		// engine binding to an unusable port if the admin pushes garbage.
+		if v >= 1 && v <= 65535 {
+			config.WgPort = int(v)
+			logApplied(mdm.KeyWireguardPort, v)
+		} else {
+			log.Warnf("MDM wireguard port %d out of range [1,65535]; keeping previous value", v)
+		}
+	}
+}
+
+// parseURL parses and validates the URL for the named service. The URL
+// must use the http or https scheme; if no port is present, ":443" is
+// appended for https or ":80" for http. The serviceName parameter is
+// used to contextualise error messages. On success returns the parsed
+// *url.URL; on failure returns a non-nil error.
 func parseURL(serviceName, serviceURL string) (*url.URL, error) {
 	parsedMgmtURL, err := url.ParseRequestURI(serviceURL)
 	if err != nil {

client/internal/profilemanager/config_mdm_test.go

@@ -0,0 +1,152 @@
+package profilemanager
+
+import (
+	"path/filepath"
+	"testing"
+
+	"github.com/stretchr/testify/assert"
+	"github.com/stretchr/testify/require"
+
+	"github.com/netbirdio/netbird/client/mdm"
+)
+
+// withMDMPolicy temporarily overrides the package-level loadMDMPolicy hook so
+// apply() observes the supplied Policy. The original loader is restored at
+// test cleanup.
+func withMDMPolicy(t *testing.T, policy *mdm.Policy) {
+	t.Helper()
+	prev := loadMDMPolicy
+	loadMDMPolicy = func() *mdm.Policy { return policy }
+	t.Cleanup(func() { loadMDMPolicy = prev })
+}
+
+func TestApply_MDMEmpty_NoEnforcement(t *testing.T) {
+	withMDMPolicy(t, mdm.NewPolicy(nil))
+
+	cfg, err := UpdateOrCreateConfig(ConfigInput{
+		ConfigPath: filepath.Join(t.TempDir(), "config.json"),
+	})
+	require.NoError(t, err)
+	require.NotNil(t, cfg)
+
+	assert.True(t, cfg.Policy().IsEmpty(), "no MDM source ⇒ empty Policy")
+	assert.False(t, cfg.Policy().HasKey(mdm.KeyManagementURL))
+	assert.Empty(t, cfg.Policy().ManagedKeys())
+
+	// Default management URL still resolves.
+	assert.Equal(t, DefaultManagementURL, cfg.ManagementURL.String())
+}
+
+func TestApply_MDMOnly_OverridesDefaults(t *testing.T) {
+	const mdmURL = "https://corp.mdm.example.com:443"
+	withMDMPolicy(t, mdm.NewPolicy(map[string]any{
+		mdm.KeyManagementURL:       mdmURL,
+		mdm.KeyDisableClientRoutes: true,
+		mdm.KeyBlockInbound:        true,
+	}))
+
+	cfg, err := UpdateOrCreateConfig(ConfigInput{
+		ConfigPath: filepath.Join(t.TempDir(), "config.json"),
+	})
+	require.NoError(t, err)
+	require.NotNil(t, cfg)
+
+	assert.Equal(t, mdmURL, cfg.ManagementURL.String())
+	assert.True(t, cfg.DisableClientRoutes)
+	assert.True(t, cfg.BlockInbound)
+
+	assert.True(t, cfg.Policy().HasKey(mdm.KeyManagementURL))
+	assert.True(t, cfg.Policy().HasKey(mdm.KeyDisableClientRoutes))
+	assert.True(t, cfg.Policy().HasKey(mdm.KeyBlockInbound))
+	assert.False(t, cfg.Policy().HasKey(mdm.KeyAllowServerSSH))
+}
+
+func TestApply_MDMBeatsCLIInput(t *testing.T) {
+	const mdmURL = "https://mdm.example.com:443"
+	const cliURL = "https://cli.example.com:443"
+
+	withMDMPolicy(t, mdm.NewPolicy(map[string]any{
+		mdm.KeyManagementURL: mdmURL,
+	}))
+
+	cfg, err := UpdateOrCreateConfig(ConfigInput{
+		ConfigPath:    filepath.Join(t.TempDir(), "config.json"),
+		ManagementURL: cliURL,
+	})
+	require.NoError(t, err)
+	require.NotNil(t, cfg)
+
+	// MDM wins over CLI-supplied management URL.
+	assert.Equal(t, mdmURL, cfg.ManagementURL.String())
+	assert.True(t, cfg.Policy().HasKey(mdm.KeyManagementURL))
+}
+
+func TestApply_MDMInvalidURL_KeepsPreviousValue(t *testing.T) {
+	withMDMPolicy(t, mdm.NewPolicy(map[string]any{
+		mdm.KeyManagementURL: "not-a-url",
+	}))
+
+	cfg, err := UpdateOrCreateConfig(ConfigInput{
+		ConfigPath: filepath.Join(t.TempDir(), "config.json"),
+	})
+	require.NoError(t, err)
+	require.NotNil(t, cfg)
+
+	// Invalid MDM URL is logged and skipped: default URL stays in place
+	// to keep the client functional.
+	assert.Equal(t, DefaultManagementURL, cfg.ManagementURL.String())
+
+	// But the key is still considered MDM-managed (admin intent is to
+	// enforce, daemon rejects user writes to this field — phase-1 scaffolding
+	// reflects this by keeping Policy.HasKey true even on parse failure).
+	assert.True(t, cfg.Policy().HasKey(mdm.KeyManagementURL))
+}
+
+func TestApply_MDMBoolKeysOverrideOnDiskValue(t *testing.T) {
+	tmp := filepath.Join(t.TempDir(), "config.json")
+
+	// Seed without MDM.
+	withMDMPolicy(t, mdm.NewPolicy(nil))
+	_, err := UpdateOrCreateConfig(ConfigInput{
+		ConfigPath:          tmp,
+		DisableClientRoutes: boolPtr(false),
+		RosenpassEnabled:    boolPtr(false),
+	})
+	require.NoError(t, err)
+
+	// Now enable MDM enforcement for these keys.
+	withMDMPolicy(t, mdm.NewPolicy(map[string]any{
+		mdm.KeyDisableClientRoutes: true,
+		mdm.KeyRosenpassEnabled:    true,
+	}))
+
+	cfg, err := UpdateOrCreateConfig(ConfigInput{ConfigPath: tmp})
+	require.NoError(t, err)
+	require.NotNil(t, cfg)
+
+	assert.True(t, cfg.DisableClientRoutes, "MDM override should flip on-disk false to true")
+	assert.True(t, cfg.RosenpassEnabled)
+	assert.True(t, cfg.Policy().HasKey(mdm.KeyDisableClientRoutes))
+	assert.True(t, cfg.Policy().HasKey(mdm.KeyRosenpassEnabled))
+}
+
+func TestApply_MDMPreSharedKeyRedactionSentinelRejected(t *testing.T) {
+	const maskSentinel = "**********"
+
+	withMDMPolicy(t, mdm.NewPolicy(map[string]any{
+		mdm.KeyPreSharedKey: maskSentinel,
+	}))
+
+	cfg, err := UpdateOrCreateConfig(ConfigInput{
+		ConfigPath: filepath.Join(t.TempDir(), "config.json"),
+	})
+	require.NoError(t, err)
+	require.NotNil(t, cfg)
+
+	// Mask sentinel must not be persisted as the actual PSK.
+	assert.NotEqual(t, maskSentinel, cfg.PreSharedKey)
+	// Key still marked managed so user writes are still rejected.
+	assert.True(t, cfg.Policy().HasKey(mdm.KeyPreSharedKey))
+}
+
+func boolPtr(b bool) *bool { return &b }

client/internal/profilemanager/id.go

@@ -0,0 +1,118 @@
+package profilemanager
+
+import (
+	"crypto/rand"
+	"encoding/hex"
+	"fmt"
+	"path/filepath"
+	"strings"
+	"unicode"
+	"unicode/utf8"
+)
+
+const (
+	// profileIDByteLen is the number of random bytes generated for a new
+	// profile ID. The resulting hex string is twice this length.
+	profileIDByteLen = 16
+
+	// shortIDLen is the number of leading characters of an ID we render in
+	// list output. Profiles per device are few, so 8 chars is collision-safe
+	// in practice and easy to type as a prefix.
+	shortIDLen = 8
+
+	// maxProfileNameLen caps the human-readable profile name to keep table
+	// output legible and prevent denial-of-service via huge JSON fields.
+	maxProfileNameLen = 128
+
+	// maxProfileIDLen bounds the on-disk filename we'll accept. New
+	// IDs are 32 hex chars, legacy stems are sanitized profile names. The
+	// cap is generous enough to cover both without permitting absurdly
+	// long filenames.
+	maxProfileIDLen = 64
+)
+
+type ID string
+
+// generateProfileID returns a new random hex ID for a profile file.
+func generateProfileID() (ID, error) {
+	buf := make([]byte, profileIDByteLen)
+	if _, err := rand.Read(buf); err != nil {
+		return "", fmt.Errorf("read random bytes: %w", err)
+	}
+	return ID(hex.EncodeToString(buf)), nil
+}
+
+// IsValidProfileFilenameStem reports whether id is safe to use as the stem
+// of a profile JSON filename.
+func IsValidProfileFilenameStem(id ID) bool {
+	s := id.String()
+	if s == "" || len(s) > maxProfileIDLen {
+		return false
+	}
+	if s == defaultProfileName {
+		return true
+	}
+	if strings.ContainsAny(s, `/\`) || strings.Contains(s, "..") {
+		return false
+	}
+	// filepath.Base catches any leftover separators on platforms with
+	// exotic path conventions.
+	if filepath.Base(s) != s {
+		return false
+	}
+	for _, r := range s {
+		if !(unicode.IsLetter(r) || unicode.IsDigit(r) || r == '_' || r == '-') {
+			return false
+		}
+	}
+	return true
+}
+
+// sanitizeDisplayName normalizes a user-supplied profile display name for
+// storage. It strips ASCII control characters, rejects invalid UTF-8, and
+// caps the length. Emojis, spaces, punctuation, and non-ASCII letters are
+// preserved. Returns an error if nothing usable remains.
+func sanitizeDisplayName(name string) (string, error) {
+	if !utf8.ValidString(name) {
+		return "", fmt.Errorf("name is not valid UTF-8")
+	}
+	name = StripCtrlChars(name)
+	name = strings.TrimSpace(name)
+	if name == "" {
+		return "", fmt.Errorf("name is empty after sanitization")
+	}
+	if utf8.RuneCountInString(name) > maxProfileNameLen {
+		return "", fmt.Errorf("name exceeds %d characters", maxProfileNameLen)
+	}
+	return name, nil
+}
+
+// StripCtrlChars control characters from a name before printing it.
+func StripCtrlChars(name string) string {
+	var b strings.Builder
+	b.Grow(len(name))
+	for _, r := range name {
+		// Skip C0 controls and DEL, plus C1 controls (0x80–0x9F).
+		if r < 0x20 || r == 0x7F || (r >= 0x80 && r <= 0x9F) {
+			continue
+		}
+		b.WriteRune(r)
+	}
+	return b.String()
+}
+
+// ShortID truncates an ID for display.
+func (id ID) ShortID() string {
+	if id == DefaultProfileName {
+		return DefaultProfileName
+	}
+	runes := []rune(id)
+	if len(runes) <= shortIDLen {
+		return id.String()
+	}
+	return string(runes[:shortIDLen])
+}
+
+func (id ID) String() string {
+	return string(id)
+}

client/internal/profilemanager/profilemanager.go

@@ -19,19 +19,41 @@ const (
 )
 
 type Profile struct {
-	Name     string
+	// ID is the on-disk filename stem (without .json). For new profiles
+	// it is a 32-char hex string; legacy profiles created before the
+	// ID-keyed layout keep their original name as their ID. The reserved
+	// value "default" identifies the special default profile.
+	ID ID
+	// Name is the human-readable display name. Falls back to ID when the
+	// underlying JSON has no "name" field set.
+	Name string
+	// Path is the absolute path to the profile JSON. Populated by the
+	// loader so callers do not have to reconstruct it from ID + dir.
+	Path     string
 	IsActive bool
 }
 
 func (p *Profile) FilePath() (string, error) {
-	if p.Name == "" {
-		return "", fmt.Errorf("active profile name is empty")
+	if p.Path != "" {
+		return p.Path, nil
 	}
 
-	if p.Name == defaultProfileName {
+	id := p.ID
+	if id == "" {
+		id = ID(p.Name)
+	}
+	if id == "" {
+		return "", fmt.Errorf("profile ID is empty")
+	}
+
+	if id == defaultProfileName {
 		return DefaultConfigPath, nil
 	}
 
+	if !IsValidProfileFilenameStem(id) {
+		return "", fmt.Errorf("invalid profile ID: %q", id)
+	}
+
 	username, err := user.Current()
 	if err != nil {
 		return "", fmt.Errorf("failed to get current user: %w", err)
@@ -42,10 +64,13 @@ func (p *Profile) FilePath() (string, error) {
 		return "", fmt.Errorf("failed to get config directory for user %s: %w", username.Username, err)
 	}
 
-	return filepath.Join(configDir, p.Name+".json"), nil
+	return filepath.Join(configDir, id.String()+".json"), nil
 }
 
 func (p *Profile) IsDefault() bool {
+	if p.ID != "" {
+		return p.ID == defaultProfileName
+	}
 	return p.Name == defaultProfileName
 }
 
@@ -57,18 +82,24 @@ func NewProfileManager() *ProfileManager {
 	return &ProfileManager{}
 }
 
+// GetActiveProfile returns the active profile as recorded in the local
+// user state file. Only ID is populated.
 func (pm *ProfileManager) GetActiveProfile() (*Profile, error) {
 	pm.mu.Lock()
 	defer pm.mu.Unlock()
 
-	prof := pm.getActiveProfileState()
-	return &Profile{Name: prof}, nil
+	id := pm.getActiveProfileState()
+	return &Profile{ID: id}, nil
 }
 
-func (pm *ProfileManager) SwitchProfile(profileName string) error {
-	profileName = sanitizeProfileName(profileName)
+// SwitchProfile records the given profile ID as active in the local user
+// state file.
+func (pm *ProfileManager) SwitchProfile(id ID) error {
+	if id != defaultProfileName && !IsValidProfileFilenameStem(id) {
+		return fmt.Errorf("invalid profile ID: %q", id)
+	}
 
-	if err := pm.setActiveProfileState(profileName); err != nil {
+	if err := pm.setActiveProfileState(id); err != nil {
 		return fmt.Errorf("failed to switch profile: %w", err)
 	}
 	return nil
@@ -85,7 +116,7 @@ func sanitizeProfileName(name string) string {
 	}, name)
 }
 
-func (pm *ProfileManager) getActiveProfileState() string {
+func (pm *ProfileManager) getActiveProfileState() ID {
 
 	configDir, err := getConfigDir()
 	if err != nil {
@@ -113,10 +144,10 @@ func (pm *ProfileManager) getActiveProfileState() string {
 		return defaultProfileName
 	}
 
-	return profileName
+	return ID(profileName)
 }
 
-func (pm *ProfileManager) setActiveProfileState(profileName string) error {
+func (pm *ProfileManager) setActiveProfileState(id ID) error {
 
 	configDir, err := getConfigDir()
 	if err != nil {
@@ -125,7 +156,7 @@ func (pm *ProfileManager) setActiveProfileState(profileName string) error {
 
 	statePath := filepath.Join(configDir, activeProfileStateFilename)
 
-	err = os.WriteFile(statePath, []byte(profileName), 0600)
+	err = os.WriteFile(statePath, []byte(id), 0600)
 	if err != nil {
 		return fmt.Errorf("failed to write active profile state: %w", err)
 	}
@@ -142,7 +173,7 @@ func GetLoginHint() string {
 		return ""
 	}
 
-	profileState, err := pm.GetProfileState(activeProf.Name)
+	profileState, err := pm.GetProfileState(activeProf.ID)
 	if err != nil {
 		log.Debugf("failed to get profile state for login hint: %v", err)
 		return ""

client/internal/profilemanager/profilemanager_test.go

@@ -50,14 +50,14 @@ func TestServiceManager_CreateAndGetDefaultProfile(t *testing.T) {
 
 			state, err := sm.GetActiveProfileState()
 			assert.NoError(t, err)
-			assert.Equal(t, state.Name, defaultProfileName) // No active profile state yet
+			assert.Equal(t, defaultProfileName, state.ID.String()) // No active profile state yet
 
 			err = sm.SetActiveProfileStateToDefault()
 			assert.NoError(t, err)
 
 			active, err := sm.GetActiveProfileState()
 			assert.NoError(t, err)
-			assert.Equal(t, "default", active.Name)
+			assert.Equal(t, "default", active.ID.String())
 		})
 	})
 }
@@ -92,14 +92,14 @@ func TestServiceManager_SetActiveProfileState(t *testing.T) {
 			currUser, err := user.Current()
 			assert.NoError(t, err)
 			sm := &ServiceManager{}
-			state := &ActiveProfileState{Name: "foo", Username: currUser.Username}
+			state := &ActiveProfileState{ID: "foo", Username: currUser.Username}
 			err = sm.SetActiveProfileState(state)
 			assert.NoError(t, err)
 
 			// Should error on nil or incomplete state
 			err = sm.SetActiveProfileState(nil)
 			assert.Error(t, err)
-			err = sm.SetActiveProfileState(&ActiveProfileState{Name: "", Username: ""})
+			err = sm.SetActiveProfileState(&ActiveProfileState{ID: "", Username: ""})
 			assert.Error(t, err)
 		})
 	})

client/internal/profilemanager/service.go

@@ -2,6 +2,7 @@ package profilemanager
 
 import (
 	"context"
+	"encoding/json"
 	"errors"
 	"fmt"
 	"io"
@@ -23,12 +24,43 @@ var (
 	DefaultConfigPathDir   = ""
 	DefaultConfigPath      = ""
 	ActiveProfileStatePath = ""
-)
 
-var (
 	ErrorOldDefaultConfigNotFound = errors.New("old default config not found")
 )
 
+// ErrAmbiguousHandle is returned when a profile handle (ID prefix or name)
+// matches more than one profile. Callers can render Candidates to help the
+// user disambiguate.
+type ErrAmbiguousHandle struct {
+	Handle     string
+	Candidates []Profile
+	Kind       AmbiguityKind
+}
+
+// AmbiguityKind describes which matcher produced the ambiguity, so callers
+// can tailor the error message.
+type AmbiguityKind int
+
+const (
+	AmbiguityKindIDPrefix AmbiguityKind = iota
+	AmbiguityKindName
+)
+
+// profileMeta is the minimal slice of a profile JSON we need, so we avoid
+// reading all fields
+type profileMeta struct {
+	Name string
+}
+
+func (e *ErrAmbiguousHandle) Error() string {
+	switch e.Kind {
+	case AmbiguityKindIDPrefix:
+		return fmt.Sprintf("ID prefix %q is ambiguous (matches %d profiles)", e.Handle, len(e.Candidates))
+	default:
+		return fmt.Sprintf("name %q is ambiguous (%d profiles share this name)", e.Handle, len(e.Candidates))
+	}
+}
+
 func init() {
 
 	DefaultConfigPathDir = "/var/lib/netbird/"
@@ -54,25 +86,34 @@ func init() {
 }
 
 type ActiveProfileState struct {
-	Name     string `json:"name"`
+	// ID is the on-disk filename stem of the active profile. The JSON tag stays
+	// as "name" for backwards compatibility with active state files written
+	// before the ID-based config files. Legacy values were profile names, which
+	// were also the legacy filename stems, so they still resolve to the correct
+	// file on disk.
+	ID       ID     `json:"name"`
 	Username string `json:"username"`
 }
 
 func (a *ActiveProfileState) FilePath() (string, error) {
-	if a.Name == "" {
-		return "", fmt.Errorf("active profile name is empty")
+	if a.ID == "" {
+		return "", fmt.Errorf("active profile ID is empty")
 	}
 
-	if a.Name == defaultProfileName {
+	if a.ID == defaultProfileName {
 		return DefaultConfigPath, nil
 	}
 
+	if !IsValidProfileFilenameStem(a.ID) {
+		return "", fmt.Errorf("invalid profile ID: %q", a.ID)
+	}
+
 	configDir, err := getConfigDirForUser(a.Username)
 	if err != nil {
 		return "", fmt.Errorf("failed to get config directory for user %s: %w", a.Username, err)
 	}
 
-	return filepath.Join(configDir, a.Name+".json"), nil
+	return filepath.Join(configDir, a.ID.String()+".json"), nil
 }
 
 type ServiceManager struct {
@@ -178,7 +219,7 @@ func (s *ServiceManager) GetActiveProfileState() (*ActiveProfileState, error) {
 				return nil, fmt.Errorf("failed to set active profile to default: %w", err)
 			}
 			return &ActiveProfileState{
-				Name:     "default",
+				ID:       defaultProfileName,
 				Username: "",
 			}, nil
 		} else {
@@ -186,12 +227,12 @@ func (s *ServiceManager) GetActiveProfileState() (*ActiveProfileState, error) {
 		}
 	}
 
-	if activeProfile.Name == "" {
+	if activeProfile.ID == "" {
 		if err := s.SetActiveProfileStateToDefault(); err != nil {
 			return nil, fmt.Errorf("failed to set active profile to default: %w", err)
 		}
 		return &ActiveProfileState{
-			Name:     "default",
+			ID:       defaultProfileName,
 			Username: "",
 		}, nil
 	}
@@ -216,25 +257,29 @@ func (s *ServiceManager) setDefaultActiveState() error {
 }
 
 func (s *ServiceManager) SetActiveProfileState(a *ActiveProfileState) error {
-	if a == nil || a.Name == "" {
+	if a == nil || a.ID == "" {
 		return errors.New("invalid active profile state")
 	}
 
-	if a.Name != defaultProfileName && a.Username == "" {
-		return fmt.Errorf("username must be set for non-default profiles, got: %s", a.Name)
+	if a.ID != defaultProfileName && a.Username == "" {
+		return fmt.Errorf("username must be set for non-default profiles, got: %s", a.ID)
+	}
+
+	if a.ID != defaultProfileName && !IsValidProfileFilenameStem(a.ID) {
+		return fmt.Errorf("invalid profile ID: %q", a.ID)
 	}
 
 	if err := util.WriteJsonWithRestrictedPermission(context.Background(), ActiveProfileStatePath, a); err != nil {
 		return fmt.Errorf("failed to write active profile state: %w", err)
 	}
 
-	log.Infof("active profile set to %s for %s", a.Name, a.Username)
+	log.Infof("active profile set to %s for %s", a.ID, a.Username)
 	return nil
 }
 
 func (s *ServiceManager) SetActiveProfileStateToDefault() error {
 	return s.SetActiveProfileState(&ActiveProfileState{
-		Name:     "default",
+		ID:       defaultProfileName,
 		Username: "",
 	})
 }
@@ -243,57 +288,117 @@ func (s *ServiceManager) DefaultProfilePath() string {
 	return DefaultConfigPath
 }
 
-func (s *ServiceManager) AddProfile(profileName, username string) error {
+// AddProfile creates a new profile with a generated ID. The user-supplied
+// displayName is stored inside the JSON's name field, the on-disk filename
+// uses the generated ID.
+//
+// The returned Profile carries the freshly-generated ID so callers can
+// show it to the user (and so the gRPC AddProfileResponse can include
+// it).
+func (s *ServiceManager) AddProfile(displayName, username string) (*Profile, error) {
 	configDir, err := s.getConfigDir(username)
 	if err != nil {
-		return fmt.Errorf("failed to get config directory: %w", err)
+		return nil, fmt.Errorf("failed to get config directory: %w", err)
 	}
 
-	profileName = sanitizeProfileName(profileName)
-
-	if profileName == defaultProfileName {
-		return fmt.Errorf("cannot create profile with reserved name: %s", defaultProfileName)
-	}
-
-	profPath := filepath.Join(configDir, profileName+".json")
-	profileExists, err := fileExists(profPath)
+	displayName, err = sanitizeDisplayName(displayName)
 	if err != nil {
-		return fmt.Errorf("failed to check if profile exists: %w", err)
-	}
-	if profileExists {
-		return ErrProfileAlreadyExists
+		return nil, fmt.Errorf("invalid profile name: %w", err)
 	}
 
+	id, err := generateProfileID()
+	if err != nil {
+		return nil, fmt.Errorf("generate profile id: %w", err)
+	}
+
+	profPath := filepath.Join(configDir, id.String()+".json")
 	cfg, err := createNewConfig(ConfigInput{ConfigPath: profPath})
 	if err != nil {
-		return fmt.Errorf("failed to create new config: %w", err)
+		return nil, fmt.Errorf("failed to create new config: %w", err)
+	}
+	cfg.Name = displayName
+
+	if err := util.WriteJson(context.Background(), profPath, cfg); err != nil {
+		return nil, fmt.Errorf("failed to write profile config: %w", err)
 	}
 
-	err = util.WriteJson(context.Background(), profPath, cfg)
+	return &Profile{
+		ID:   id,
+		Name: displayName,
+		Path: profPath,
+	}, nil
+}
+
+func (s *ServiceManager) RenameProfile(id ID, username string, newName string) error {
+	displayName, err := sanitizeDisplayName(newName)
 	if err != nil {
-		return fmt.Errorf("failed to write profile config: %w", err)
+		return fmt.Errorf("invalid profile name: %w", err)
 	}
 
+	if !IsValidProfileFilenameStem(id) {
+		return fmt.Errorf("invalid profile ID: %q", id)
+	}
+
+	profiles, err := s.loadAllProfiles(username)
+	if err != nil {
+		return fmt.Errorf("load profiles: %w", err)
+	}
+
+	var target *Profile
+	for i := range profiles {
+		if profiles[i].ID == id {
+			target = &profiles[i]
+			break
+		}
+	}
+	if target == nil {
+		return ErrProfileNotFound
+	}
+
+	data, err := os.ReadFile(target.Path)
+	if err != nil {
+		return err
+	}
+	var cfg Config
+	if err := json.Unmarshal(data, &cfg); err != nil {
+		return err
+	}
+	cfg.Name = displayName
+
+	if err := util.WriteJson(context.Background(), target.Path, cfg); err != nil {
+		return fmt.Errorf("failed to write profile name: %w", err)
+	}
 	return nil
 }
 
-func (s *ServiceManager) RemoveProfile(profileName, username string) error {
-	configDir, err := s.getConfigDir(username)
-	if err != nil {
-		return fmt.Errorf("failed to get config directory: %w", err)
+// RemoveProfile deletes the profile identified by id. Callers must have
+// already resolved any user-supplied handle to a concrete ID via
+// ResolveProfile.
+func (s *ServiceManager) RemoveProfile(id ID, username string) error {
+	if id == defaultProfileName {
+		defaultName := readProfileName(DefaultConfigPath)
+		if defaultName == "" {
+			defaultName = defaultProfileName
+		}
+		return fmt.Errorf("cannot remove default profile with name: %s", defaultName)
+	}
+	if !IsValidProfileFilenameStem(id) {
+		return fmt.Errorf("invalid profile ID: %q", id)
 	}
 
-	profileName = sanitizeProfileName(profileName)
-
-	if profileName == defaultProfileName {
-		return fmt.Errorf("cannot remove profile with reserved name: %s", defaultProfileName)
-	}
-	profPath := filepath.Join(configDir, profileName+".json")
-	profileExists, err := fileExists(profPath)
+	profiles, err := s.loadAllProfiles(username)
 	if err != nil {
-		return fmt.Errorf("failed to check if profile exists: %w", err)
+		return fmt.Errorf("load profiles: %w", err)
 	}
-	if !profileExists {
+
+	var target *Profile
+	for i := range profiles {
+		if profiles[i].ID == id {
+			target = &profiles[i]
+			break
+		}
+	}
+	if target == nil {
 		return ErrProfileNotFound
 	}
 
@@ -301,57 +406,26 @@ func (s *ServiceManager) RemoveProfile(profileName, username string) error {
 	if err != nil && !errors.Is(err, ErrNoActiveProfile) {
 		return fmt.Errorf("failed to get active profile: %w", err)
 	}
-
-	if activeProf != nil && activeProf.Name == profileName {
-		return fmt.Errorf("cannot remove active profile: %s", profileName)
+	if activeProf != nil && activeProf.ID == id {
+		return fmt.Errorf("cannot remove active profile: %s", id)
 	}
 
-	err = util.RemoveJson(profPath)
-	if err != nil {
+	if err := util.RemoveJson(target.Path); err != nil {
 		return fmt.Errorf("failed to remove profile config: %w", err)
 	}
+
+	stateFile := filepath.Join(filepath.Dir(target.Path), id.String()+".state.json")
+	if err := os.Remove(stateFile); err != nil && !os.IsNotExist(err) {
+		log.Warnf("failed to remove profile state file %s: %v", stateFile, err)
+	}
+
 	return nil
 }
 
+// ListProfiles returns every profile for the given user, including the
+// default profile, with IsActive flags set.
 func (s *ServiceManager) ListProfiles(username string) ([]Profile, error) {
-	configDir, err := s.getConfigDir(username)
-	if err != nil {
-		return nil, fmt.Errorf("failed to get config directory: %w", err)
-	}
-
-	files, err := util.ListFiles(configDir, "*.json")
-	if err != nil {
-		return nil, fmt.Errorf("failed to list profile files: %w", err)
-	}
-
-	var filtered []string
-	for _, file := range files {
-		if strings.HasSuffix(file, "state.json") {
-			continue // skip state files
-		}
-		filtered = append(filtered, file)
-	}
-	sort.Strings(filtered)
-
-	var activeProfName string
-	activeProf, err := s.GetActiveProfileState()
-	if err == nil {
-		activeProfName = activeProf.Name
-	}
-
-	var profiles []Profile
-	// add default profile always
-	profiles = append(profiles, Profile{Name: defaultProfileName, IsActive: activeProfName == "" || activeProfName == defaultProfileName})
-	for _, file := range filtered {
-		profileName := strings.TrimSuffix(filepath.Base(file), ".json")
-		var isActive bool
-		if activeProfName != "" && activeProfName == profileName {
-			isActive = true
-		}
-		profiles = append(profiles, Profile{Name: profileName, IsActive: isActive})
-	}
-
-	return profiles, nil
+	return s.loadAllProfiles(username)
 }
 
 // GetStatePath returns the path to the state file based on the operating system
@@ -369,7 +443,12 @@ func (s *ServiceManager) GetStatePath() string {
 		return defaultStatePath
 	}
 
-	if activeProf.Name == defaultProfileName {
+	if activeProf.ID == defaultProfileName {
+		return defaultStatePath
+	}
+
+	if !IsValidProfileFilenameStem(activeProf.ID) {
+		log.Warnf("invalid active profile ID %q, using default state path", activeProf.ID)
 		return defaultStatePath
 	}
 
@@ -379,7 +458,7 @@ func (s *ServiceManager) GetStatePath() string {
 		return defaultStatePath
 	}
 
-	return filepath.Join(configDir, activeProf.Name+".state.json")
+	return filepath.Join(configDir, activeProf.ID.String()+".state.json")
 }
 
 // getConfigDir returns the profiles directory, using profilesDir if set, otherwise getConfigDirForUser
@@ -390,3 +469,169 @@ func (s *ServiceManager) getConfigDir(username string) (string, error) {
 
 	return getConfigDirForUser(username)
 }
+
+// loadAllProfiles returns every profile visible to the daemon for the
+// given user, including the default profile. The returned slice is sorted
+// by ID for a stable display order.
+//
+// Each Profile is fully populated: ID is the filename stem, Name comes
+// from the JSON's "name" field (falling back to the filename stem when absent)
+// and Path is built from a basename read off disk.
+func (s *ServiceManager) loadAllProfiles(username string) ([]Profile, error) {
+	activeID, activeIsDefault := s.activeProfileID()
+	defaultName := readProfileName(DefaultConfigPath)
+	if defaultName == "" {
+		defaultName = defaultProfileName
+	}
+
+	profiles := []Profile{{
+		ID:       defaultProfileName,
+		Name:     defaultName,
+		Path:     DefaultConfigPath,
+		IsActive: activeIsDefault,
+	}}
+
+	configDir, err := s.getConfigDir(username)
+	if err != nil {
+		return nil, fmt.Errorf("get config directory: %w", err)
+	}
+
+	entries, err := os.ReadDir(configDir)
+	if err != nil {
+		if errors.Is(err, os.ErrNotExist) {
+			return profiles, nil
+		}
+		return nil, fmt.Errorf("read profile directory: %w", err)
+	}
+
+	var fileProfiles []Profile
+	for _, entry := range entries {
+		if entry.IsDir() {
+			continue
+		}
+		base := entry.Name()
+		if !strings.HasSuffix(base, ".json") {
+			continue
+		}
+		if strings.HasSuffix(base, ".state.json") {
+			continue
+		}
+		stem := ID(strings.TrimSuffix(base, ".json"))
+		if stem == defaultProfileName {
+			// default lives at the top-level config dir, not under /<user>
+			continue
+		}
+		if !IsValidProfileFilenameStem(ID(stem)) {
+			continue
+		}
+		path := filepath.Join(configDir, base)
+		name := readProfileName(path)
+		if name == "" {
+			name = stem.String()
+		}
+		fileProfiles = append(fileProfiles, Profile{
+			ID:       stem,
+			Name:     name,
+			Path:     path,
+			IsActive: stem == ID(activeID),
+		})
+	}
+
+	sort.Slice(fileProfiles, func(i, j int) bool {
+		if fileProfiles[i].Name != fileProfiles[j].Name {
+			return fileProfiles[i].Name < fileProfiles[j].Name
+		}
+		// Sort tie-break on ID so duplicate names always render in the same order.
+		return fileProfiles[i].ID < fileProfiles[j].ID
+	})
+	profiles = append(profiles, fileProfiles...)
+	return profiles, nil
+}
+
+// readProfileName parses just the "name" field from the profile Json.
+func readProfileName(path string) string {
+	data, err := os.ReadFile(path)
+	if err != nil {
+		return ""
+	}
+	var meta profileMeta
+	if err := json.Unmarshal(data, &meta); err != nil {
+		return ""
+	}
+	return meta.Name
+}
+
+// activeProfileID returns the currently-active profile's ID. The second
+// return value is true when the active profile is the default one.
+func (s *ServiceManager) activeProfileID() (ID, bool) {
+	state, err := s.GetActiveProfileState()
+	if err != nil || state == nil {
+		return defaultProfileName, true
+	}
+	if state.ID == "" || state.ID == defaultProfileName {
+		return defaultProfileName, true
+	}
+	return state.ID, false
+}
+
+// ResolveProfile turns a user-supplied handle into a Profile. Resolution
+// precedence is: exact ID match, then unique exact name, then unique ID
+// prefix. Ambiguous matches return *ErrAmbiguousHandle so callers can
+// surface the candidates.
+func (s *ServiceManager) ResolveProfile(handle, username string) (*Profile, error) {
+	if handle == "" {
+		return nil, fmt.Errorf("profile handle is empty")
+	}
+
+	profiles, err := s.loadAllProfiles(username)
+	if err != nil {
+		return nil, err
+	}
+
+	for i := range profiles {
+		if profiles[i].ID == ID(handle) {
+			return &profiles[i], nil
+		}
+	}
+
+	var nameMatches []Profile
+	for i := range profiles {
+		if profiles[i].Name == handle {
+			nameMatches = append(nameMatches, profiles[i])
+		}
+	}
+	if len(nameMatches) == 1 {
+		return &nameMatches[0], nil
+	}
+	if len(nameMatches) > 1 {
+		return nil, &ErrAmbiguousHandle{
+			Handle:     handle,
+			Candidates: nameMatches,
+			Kind:       AmbiguityKindName,
+		}
+	}
+
+	// ID prefix match. Skip the default profile so `select d` does not
+	// accidentally pick it via prefix.
+	var prefixMatches []Profile
+	for i := range profiles {
+		if profiles[i].ID == defaultProfileName {
+			continue
+		}
+		if strings.HasPrefix(profiles[i].ID.String(), handle) {
+			prefixMatches = append(prefixMatches, profiles[i])
+		}
+	}
+	if len(prefixMatches) == 1 {
+		return &prefixMatches[0], nil
+	}
+	if len(prefixMatches) > 1 {
+		return nil, &ErrAmbiguousHandle{
+			Handle:     handle,
+			Candidates: prefixMatches,
+			Kind:       AmbiguityKindIDPrefix,
+		}
+	}
+
+	return nil, ErrProfileNotFound
+}

client/internal/profilemanager/service_test.go

@@ -0,0 +1,230 @@
+package profilemanager
+
+import (
+	"context"
+	"errors"
+	"os"
+	"os/user"
+	"path/filepath"
+	"strings"
+	"testing"
+
+	"github.com/stretchr/testify/assert"
+	"github.com/stretchr/testify/require"
+
+	"github.com/netbirdio/netbird/util"
+)
+
+// withTestSM wires up patched globals + a clean config dir and returns a
+// fully initialized ServiceManager plus the username we are scoped to.
+func withTestSM(t *testing.T, fn func(sm *ServiceManager, username string)) {
+	t.Helper()
+	withTempConfigDir(t, func(configDir string) {
+		withPatchedGlobals(t, configDir, func() {
+			u, err := user.Current()
+			require.NoError(t, err)
+			sm := &ServiceManager{}
+			require.NoError(t, sm.CreateDefaultProfile())
+			fn(sm, u.Username)
+		})
+	})
+}
+
+func TestServiceProfile_ExactID(t *testing.T) {
+	withTestSM(t, func(sm *ServiceManager, username string) {
+		created, err := sm.AddProfile("work", username)
+		require.NoError(t, err)
+
+		got, err := sm.ResolveProfile(created.ID.String(), username)
+		require.NoError(t, err)
+		assert.Equal(t, created.ID, got.ID)
+		assert.Equal(t, "work", got.Name)
+	})
+}
+
+func TestServiceProfile_IDPrefix(t *testing.T) {
+	withTestSM(t, func(sm *ServiceManager, username string) {
+		created, err := sm.AddProfile("work", username)
+		require.NoError(t, err)
+
+		prefix := created.ID[:4]
+		got, err := sm.ResolveProfile(prefix.String(), username)
+		require.NoError(t, err)
+		assert.Equal(t, created.ID, got.ID)
+	})
+}
+
+func TestServiceProfile_AmbiguousPrefix(t *testing.T) {
+	withTestSM(t, func(sm *ServiceManager, username string) {
+		// Plant two profiles whose IDs share a known prefix by writing
+		// the files directly, since generated IDs are random.
+		configDir, err := sm.getConfigDir(username)
+		require.NoError(t, err)
+		for _, id := range []string{"abcd1111aaaa", "abcd2222bbbb"} {
+			path := filepath.Join(configDir, id+".json")
+			require.NoError(t, util.WriteJson(context.Background(), path, &Config{Name: id}))
+		}
+
+		_, err = sm.ResolveProfile("abcd", username)
+		var amb *ErrAmbiguousHandle
+		require.ErrorAs(t, err, &amb)
+		assert.Equal(t, AmbiguityKindIDPrefix, amb.Kind)
+		assert.Len(t, amb.Candidates, 2)
+	})
+}
+
+func TestServiceProfile_ExactNameUnique(t *testing.T) {
+	withTestSM(t, func(sm *ServiceManager, username string) {
+		_, err := sm.AddProfile("work", username)
+		require.NoError(t, err)
+
+		got, err := sm.ResolveProfile("work", username)
+		require.NoError(t, err)
+		assert.Equal(t, "work", got.Name)
+	})
+}
+
+func TestServiceProfile_AmbiguousName(t *testing.T) {
+	withTestSM(t, func(sm *ServiceManager, username string) {
+		_, err := sm.AddProfile("work", username)
+		require.NoError(t, err)
+		_, err = sm.AddProfile("work", username)
+		require.NoError(t, err)
+
+		_, err = sm.ResolveProfile("work", username)
+		var amb *ErrAmbiguousHandle
+		require.ErrorAs(t, err, &amb)
+		assert.Equal(t, AmbiguityKindName, amb.Kind)
+		assert.Len(t, amb.Candidates, 2)
+	})
+}
+
+func TestServiceProfile_NotFound(t *testing.T) {
+	withTestSM(t, func(sm *ServiceManager, username string) {
+		_, err := sm.ResolveProfile("nope", username)
+		assert.ErrorIs(t, err, ErrProfileNotFound)
+	})
+}
+
+func TestServiceProfile_DefaultByExactID(t *testing.T) {
+	withTestSM(t, func(sm *ServiceManager, username string) {
+		got, err := sm.ResolveProfile(defaultProfileName, username)
+		require.NoError(t, err)
+		assert.Equal(t, defaultProfileName, got.ID.String())
+	})
+}
+
+func TestServiceProfile_LegacyFilenameCoexists(t *testing.T) {
+	// Legacy profiles stored as <name>.json with no "name" JSON field
+	// should still be discoverable by name and removable by name.
+	withTestSM(t, func(sm *ServiceManager, username string) {
+		configDir, err := sm.getConfigDir(username)
+		require.NoError(t, err)
+		path := filepath.Join(configDir, "legacy.json")
+		require.NoError(t, util.WriteJson(context.Background(), path, &Config{}))
+
+		got, err := sm.ResolveProfile("legacy", username)
+		require.NoError(t, err)
+		assert.Equal(t, "legacy", got.ID.String())
+		// Name falls back to the filename stem when JSON omits it.
+		assert.Equal(t, "legacy", got.Name)
+	})
+}
+
+func TestAddProfile_AllowsDuplicateWithFlag(t *testing.T) {
+	withTestSM(t, func(sm *ServiceManager, username string) {
+		first, err := sm.AddProfile("work", username)
+		require.NoError(t, err)
+
+		second, err := sm.AddProfile("work", username)
+		require.NoError(t, err)
+		assert.NotEqual(t, first.ID, second.ID)
+		assert.Equal(t, "work", second.Name)
+	})
+}
+
+func TestAddProfile_RejectsInvalidNames(t *testing.T) {
+	withTestSM(t, func(sm *ServiceManager, username string) {
+		cases := []string{
+			"",                                       // empty
+			"\x00\x01",                               // only control chars (becomes empty)
+			strings.Repeat("a", maxProfileNameLen+1), // too long
+		}
+		for _, name := range cases {
+			_, err := sm.AddProfile(name, username)
+			assert.Error(t, err, "expected error for %q", name)
+		}
+	})
+}
+
+func TestRemoveProfile_RejectsInvalidID(t *testing.T) {
+	withTestSM(t, func(sm *ServiceManager, username string) {
+		err := sm.RemoveProfile("../escape", username)
+		assert.Error(t, err)
+	})
+}
+
+func TestSanitizeDisplayName(t *testing.T) {
+	cases := []struct {
+		in      string
+		want    string
+		wantErr bool
+	}{
+		{"work", "work", false},
+		{"My Work Account", "My Work Account", false},
+		{"emoji 🚀 ok", "emoji 🚀 ok", false},
+		{"漢字テスト", "漢字テスト", false},
+		{"with\x00null", "withnull", false},
+		{"\x01\x02\x03", "", true},
+		{"", "", true},
+	}
+	for _, tc := range cases {
+		got, err := sanitizeDisplayName(tc.in)
+		if tc.wantErr {
+			assert.Error(t, err, "case %q", tc.in)
+			continue
+		}
+		assert.NoError(t, err, "case %q", tc.in)
+		assert.Equal(t, tc.want, got, "case %q", tc.in)
+	}
+}
+
+func TestIsValidProfileFilenameStem(t *testing.T) {
+	cases := []struct {
+		in   string
+		want bool
+	}{
+		{"default", true},
+		{"abc123def456", true},
+		{"legacy-name", true},
+		{"legacy_name", true},
+		{"", false},
+		{"..", false},
+		{"../etc", false},
+		{"foo/bar", false},
+		{`foo\bar`, false},
+		{"with space", false},
+		{"with.dot", false},
+		{strings.Repeat("a", maxProfileIDLen+1), false},
+	}
+	for _, tc := range cases {
+		got := IsValidProfileFilenameStem(ID(tc.in))
+		assert.Equal(t, tc.want, got, "case %q", tc.in)
+	}
+}
+
+func TestRemoveProfile_DeletesStateFile(t *testing.T) {
+	withTestSM(t, func(sm *ServiceManager, username string) {
+		created, err := sm.AddProfile("work", username)
+		require.NoError(t, err)
+
+		configDir, err := sm.getConfigDir(username)
+		require.NoError(t, err)
+		statePath := filepath.Join(configDir, created.ID.String()+".state.json")
+		require.NoError(t, os.WriteFile(statePath, []byte(`{"email":"a@b"}`), 0600))
+
+		require.NoError(t, sm.RemoveProfile(created.ID, username))
+		_, err = os.Stat(statePath)
+		assert.True(t, errors.Is(err, os.ErrNotExist), "state file should be removed")
+	})
+}

client/internal/profilemanager/state.go

@@ -13,13 +13,20 @@ type ProfileState struct {
 	Email string `json:"email"`
 }
 
-func (pm *ProfileManager) GetProfileState(profileName string) (*ProfileState, error) {
+// GetProfileState reads the per-profile state file keyed by profile ID.
+// The state file lives in the user's config directory. Legacy state files
+// keyed by the old profile name remain readable.
+func (pm *ProfileManager) GetProfileState(id ID) (*ProfileState, error) {
 	configDir, err := getConfigDir()
 	if err != nil {
 		return nil, fmt.Errorf("get config directory: %w", err)
 	}
 
-	stateFile := filepath.Join(configDir, profileName+".state.json")
+	if id != defaultProfileName && !IsValidProfileFilenameStem(id) {
+		return nil, fmt.Errorf("invalid profile ID: %q", id)
+	}
+
+	stateFile := filepath.Join(configDir, id.String()+".state.json")
 	stateFileExists, err := fileExists(stateFile)
 	if err != nil {
 		return nil, fmt.Errorf("failed to check if profile state file exists: %w", err)
@@ -51,7 +58,12 @@ func (pm *ProfileManager) SetActiveProfileState(state *ProfileState) error {
 		return fmt.Errorf("get active profile: %w", err)
 	}
 
-	stateFile := filepath.Join(configDir, activeProf.Name+".state.json")
+	id := activeProf.ID
+	if id != defaultProfileName && !IsValidProfileFilenameStem(id) {
+		return fmt.Errorf("invalid active profile ID: %q", id)
+	}
+
+	stateFile := filepath.Join(configDir, id.String()+".state.json")
 	err = util.WriteJsonWithRestrictedPermission(context.Background(), stateFile, state)
 	if err != nil {
 		return fmt.Errorf("write profile state: %w", err)

client/internal/relay/relay.go

@@ -32,6 +32,9 @@ type ProbeResult struct {
 	URI  string
 	Err  error
 	Addr string
+	// Transport is the negotiated relay transport, empty
+	// for stun/turn probes or when not connected.
+	Transport string
 }
 
 type StunTurnProbe struct {

client/internal/rosenpass/manager_test.go

@@ -22,14 +22,14 @@ type removePeerCall struct {
 }
 
 type mockServer struct {
-	mu         sync.Mutex
-	addCalls   []addPeerCall
-	removed    []removePeerCall
-	nextID     rp.PeerID
-	addErr     error
-	removeErr  error
-	closed     bool
-	ran        bool
+	mu        sync.Mutex
+	addCalls  []addPeerCall
+	removed   []removePeerCall
+	nextID    rp.PeerID
+	addErr    error
+	removeErr error
+	closed    bool
+	ran       bool
 }
 
 func (m *mockServer) AddPeer(cfg rp.PeerConfig) (rp.PeerID, error) {
@@ -51,7 +51,7 @@ func (m *mockServer) RemovePeer(id rp.PeerID) error {
 	return m.removeErr
 }
 
-func (m *mockServer) Run() error  { m.ran = true; return nil }
+func (m *mockServer) Run() error   { m.ran = true; return nil }
 func (m *mockServer) Close() error { m.closed = true; return nil }
 
 type setPSKCall struct {

client/internal/rosenpass/seed_test.go

@@ -41,4 +41,3 @@ func TestDeterministicSeedKey_TooShortKey_ReturnsError(t *testing.T) {
 	_, err = DeterministicSeedKey(long, short)
 	require.Error(t, err)
 }
-

client/internal/routemanager/exit_node_selection_test.go

@@ -1,191 +0,0 @@
-package routemanager
-
-import (
-	"net/netip"
-	"testing"
-
-	"github.com/stretchr/testify/assert"
-	"github.com/stretchr/testify/require"
-
-	"github.com/netbirdio/netbird/client/internal/routeselector"
-	"github.com/netbirdio/netbird/route"
-)
-
-func newExitNodeTestManager() *DefaultManager {
-	return &DefaultManager{routeSelector: routeselector.NewRouteSelector()}
-}
-
-func exitRoute(netID, peer string, skipAutoApply bool) *route.Route {
-	return &route.Route{
-		NetID:         route.NetID(netID),
-		Network:       netip.MustParsePrefix("0.0.0.0/0"),
-		Peer:          peer,
-		SkipAutoApply: skipAutoApply,
-	}
-}
-
-func TestPickPreferredExitNode(t *testing.T) {
-	tests := []struct {
-		name string
-		info exitNodeInfo
-		want route.NetID
-	}{
-		{
-			name: "persisted user selection wins over management",
-			info: exitNodeInfo{
-				allIDs:               []route.NetID{"a", "b", "c"},
-				userSelected:         []route.NetID{"b"},
-				selectedByManagement: []route.NetID{"a"},
-			},
-			want: "b",
-		},
-		{
-			name: "multiple user-selected self-heal to deterministic min",
-			info: exitNodeInfo{
-				allIDs:       []route.NetID{"a", "b", "c"},
-				userSelected: []route.NetID{"c", "a"},
-			},
-			want: "a",
-		},
-		{
-			name: "explicit opt-out keeps none",
-			info: exitNodeInfo{
-				allIDs:         []route.NetID{"a", "b"},
-				userDeselected: []route.NetID{"a", "b"},
-			},
-			want: "",
-		},
-		{
-			name: "fresh defaults to management auto-apply pick",
-			info: exitNodeInfo{
-				allIDs:               []route.NetID{"a", "b", "c"},
-				selectedByManagement: []route.NetID{"b"},
-			},
-			want: "b",
-		},
-		{
-			name: "no user pick and no management auto-apply selects none",
-			info: exitNodeInfo{
-				allIDs: []route.NetID{"c", "a", "b"},
-			},
-			want: "",
-		},
-		{
-			name: "user-deselect does not block a management auto-apply sibling",
-			info: exitNodeInfo{
-				allIDs:               []route.NetID{"a", "b"},
-				userDeselected:       []route.NetID{"a"},
-				selectedByManagement: []route.NetID{"b"},
-			},
-			want: "b",
-		},
-	}
-
-	for _, tt := range tests {
-		t.Run(tt.name, func(t *testing.T) {
-			assert.Equal(t, tt.want, pickPreferredExitNode(tt.info), "preferred exit node")
-		})
-	}
-}
-
-func TestEnforceSingleExitNode(t *testing.T) {
-	m := newExitNodeTestManager()
-	all := []route.NetID{"a", "b", "c"}
-
-	m.enforceSingleExitNode("b", all)
-	assert.False(t, m.routeSelector.IsSelected("a"), "a should be deselected")
-	assert.True(t, m.routeSelector.IsSelected("b"), "b should be the only selected exit node")
-	assert.False(t, m.routeSelector.IsSelected("c"), "c should be deselected")
-
-	// Switching the preferred node moves the single selection.
-	m.enforceSingleExitNode("c", all)
-	assert.False(t, m.routeSelector.IsSelected("a"), "a stays deselected")
-	assert.False(t, m.routeSelector.IsSelected("b"), "b should now be deselected")
-	assert.True(t, m.routeSelector.IsSelected("c"), "c should now be selected")
-
-	// Empty preferred turns every exit node off.
-	m.enforceSingleExitNode("", all)
-	for _, id := range all {
-		assert.False(t, m.routeSelector.IsSelected(id), "no exit node should be selected")
-	}
-}
-
-func TestEnforceSingleExitNode_RespectsDeselectAll(t *testing.T) {
-	m := newExitNodeTestManager()
-	m.routeSelector.DeselectAllRoutes()
-
-	m.enforceSingleExitNode("b", []route.NetID{"a", "b"})
-
-	assert.True(t, m.routeSelector.IsDeselectAllActive(), "global deselect-all must stay in effect")
-	assert.False(t, m.routeSelector.IsSelected("b"), "no exit node should be forced on while deselect-all is set")
-}
-
-func TestUpdateRouteSelectorFromManagement_FreshSelectsOne(t *testing.T) {
-	m := newExitNodeTestManager()
-	routes := route.HAMap{
-		"exitA|0.0.0.0/0":    {exitRoute("exitA", "p1", false)},
-		"exitB|0.0.0.0/0":    {exitRoute("exitB", "p2", false)},
-		"lan|192.168.1.0/24": {{NetID: "lan", Network: netip.MustParsePrefix("192.168.1.0/24"), Peer: "p3"}},
-		"exitC|0.0.0.0/0":    {exitRoute("exitC", "p4", false)},
-	}
-
-	m.updateRouteSelectorFromManagement(routes)
-
-	// Exactly one exit node (the deterministic first) is selected.
-	assert.True(t, m.routeSelector.IsSelected("exitA"), "exitA is the deterministic default")
-	assert.False(t, m.routeSelector.IsSelected("exitB"), "exitB must not also be selected")
-	assert.False(t, m.routeSelector.IsSelected("exitC"), "exitC must not also be selected")
-	// Non-exit routes are left at their default-on state.
-	assert.True(t, m.routeSelector.IsSelected("lan"), "non-exit route selection is untouched")
-}
-
-func TestUpdateRouteSelectorFromManagement_HonorsPersistedPick(t *testing.T) {
-	m := newExitNodeTestManager()
-	routes := route.HAMap{
-		"exitA|0.0.0.0/0": {exitRoute("exitA", "p1", false)},
-		"exitB|0.0.0.0/0": {exitRoute("exitB", "p2", false)},
-	}
-	all := []route.NetID{"exitA", "exitB"}
-
-	// Simulate the state the runtime select path leaves behind: exactly one
-	// exit node explicitly selected, its sibling deselected.
-	require.NoError(t, m.routeSelector.SelectRoutes([]route.NetID{"exitB"}, true, all))
-	require.NoError(t, m.routeSelector.DeselectRoutes([]route.NetID{"exitA"}, all))
-
-	m.updateRouteSelectorFromManagement(routes)
-
-	assert.True(t, m.routeSelector.IsSelected("exitB"), "persisted pick must stay selected")
-	assert.False(t, m.routeSelector.IsSelected("exitA"), "the other exit node stays deselected")
-}
-
-func TestUpdateRouteSelectorFromManagement_OptOutKeepsNone(t *testing.T) {
-	m := newExitNodeTestManager()
-	routes := route.HAMap{
-		"exitA|0.0.0.0/0": {exitRoute("exitA", "p1", false)},
-		"exitB|0.0.0.0/0": {exitRoute("exitB", "p2", false)},
-	}
-	all := []route.NetID{"exitA", "exitB"}
-
-	// User deselected exit nodes and selected none.
-	require.NoError(t, m.routeSelector.DeselectRoutes(all, all))
-
-	m.updateRouteSelectorFromManagement(routes)
-
-	assert.False(t, m.routeSelector.IsSelected("exitA"), "opt-out keeps exitA off")
-	assert.False(t, m.routeSelector.IsSelected("exitB"), "opt-out keeps exitB off")
-}
-
-func TestUpdateRouteSelectorFromManagement_NoAutoApplySelectsNone(t *testing.T) {
-	m := newExitNodeTestManager()
-	// SkipAutoApply=true: management offers the exit nodes but doesn't request
-	// auto-activation, so none should be selected until the user picks one.
-	routes := route.HAMap{
-		"exitA|0.0.0.0/0": {exitRoute("exitA", "p1", true)},
-		"exitB|0.0.0.0/0": {exitRoute("exitB", "p2", true)},
-	}
-
-	m.updateRouteSelectorFromManagement(routes)
-
-	assert.False(t, m.routeSelector.IsSelected("exitA"), "no auto-apply keeps exitA off")
-	assert.False(t, m.routeSelector.IsSelected("exitB"), "no auto-apply keeps exitB off")
-}

client/internal/routemanager/manager.go

@@ -333,6 +333,8 @@ func (m *DefaultManager) Stop(stateManager *statemanager.Manager) {
 		}
 	}
 
+	m.notifier.Close()
+
 	m.mux.Lock()
 	defer m.mux.Unlock()
 	m.clientRoutes = nil
@@ -440,11 +442,6 @@ func (m *DefaultManager) UpdateRoutes(
 
 		m.updateClientNetworks(updateSerial, filteredClientRoutes)
 		m.notifier.OnNewRoutes(filteredClientRoutes)
-		// A new network map can add or drop route/exit-node candidates without
-		// touching any peer's chosen-route state, so the peer status alone
-		// wouldn't notify SubscribeStatus subscribers. Bump the revision so the
-		// UI re-fetches ListNetworks.
-		m.statusRecorder.BumpNetworksRevision()
 	}
 	m.clientRoutes = clientRoutes
 
@@ -585,10 +582,6 @@ func (m *DefaultManager) TriggerSelection(networks route.HAMap) {
 	if err := m.stateManager.UpdateState((*SelectorState)(m.routeSelector)); err != nil {
 		log.Errorf("failed to update state: %v", err)
 	}
-
-	// A selection change flips Network.selected without altering the candidate
-	// set, so bump the revision to push the new state to the UI.
-	m.statusRecorder.BumpNetworksRevision()
 }
 
 // stopObsoleteClients stops the client network watcher for the networks that are not in the new list
@@ -708,22 +701,42 @@ func resolveURLsToIPs(urls []string) []net.IP {
 	return ips
 }
 
-// updateRouteSelectorFromManagement reconciles exit-node selection on every
-// network map: it keeps at most one exit node selected — the user's persisted
-// pick, else whatever management marks for auto-apply (SkipAutoApply=false),
-// else none. We never auto-activate an exit node the map doesn't request; it
-// stays off until the user picks it. Exit nodes are mutually exclusive, but the
-// RouteSelector stores routes with default-on semantics, so without this every
-// available exit node would report selected at once.
+// updateRouteSelectorFromManagement updates the route selector based on the isSelected status from the management server
 func (m *DefaultManager) updateRouteSelectorFromManagement(clientRoutes route.HAMap) {
-	info := m.collectExitNodeInfo(clientRoutes)
-	if len(info.allIDs) == 0 {
+	m.mirrorV6ExitPairSelections(clientRoutes)
+
+	// An explicit user "deselect all" must not be overridden by management auto-apply.
+	// Auto-applying an exit node here would call SelectRoutes, which clears the
+	// deselect-all flag and re-enables every route the user turned off.
+	if m.routeSelector.IsDeselectAll() {
 		return
 	}
 
-	preferred := pickPreferredExitNode(info)
-	m.enforceSingleExitNode(preferred, info.allIDs)
-	m.logExitNodeUpdate(info, preferred)
+	exitNodeInfo := m.collectExitNodeInfo(clientRoutes)
+	if len(exitNodeInfo.allIDs) == 0 {
+		return
+	}
+
+	m.updateExitNodeSelections(exitNodeInfo)
+	m.logExitNodeUpdate(exitNodeInfo)
+}
+
+// mirrorV6ExitPairSelections keeps every synthesized "-v6" exit route's selection
+// consistent with its v4 base. The v4/v6 exit pair is a single toggle, so the v6
+// entry always follows the base: deselecting the v4 exit node also drops its ::/0
+// pair, and any stale (orphaned) explicit selection on the v6 entry is reset. This
+// runs before selection is read so both collectExitNodeInfo and FilterSelectedExitNodes
+// see consistent state, including pairs loaded from persisted selector state.
+func (m *DefaultManager) mirrorV6ExitPairSelections(clientRoutes route.HAMap) {
+	routesByNetID := make(map[route.NetID][]*route.Route, len(clientRoutes))
+	for haID, routes := range clientRoutes {
+		routesByNetID[haID.NetID()] = routes
+	}
+
+	for v6ID := range route.V6ExitMergeSet(routesByNetID) {
+		baseID := route.NetID(strings.TrimSuffix(string(v6ID), route.V6ExitSuffix))
+		m.routeSelector.SyncPairedSelection(baseID, v6ID)
+	}
 }
 
 type exitNodeInfo struct {
@@ -733,10 +746,6 @@ type exitNodeInfo struct {
 	userDeselected       []route.NetID
 }
 
-// collectExitNodeInfo categorises the available exit nodes by their persisted
-// selection state. It keys on the base (v4) NetID and skips the synthesized
-// "-v6" partner, which inherits its base's selection through the RouteSelector
-// — counting it separately would double-count the pair.
 func (m *DefaultManager) collectExitNodeInfo(clientRoutes route.HAMap) exitNodeInfo {
 	var info exitNodeInfo
 
@@ -746,9 +755,6 @@ func (m *DefaultManager) collectExitNodeInfo(clientRoutes route.HAMap) exitNodeI
 		}
 
 		netID := haID.NetID()
-		if strings.HasSuffix(string(netID), route.V6ExitSuffix) {
-			continue
-		}
 		info.allIDs = append(info.allIDs, netID)
 
 		if m.routeSelector.HasUserSelectionForRoute(netID) {
@@ -785,69 +791,45 @@ func (m *DefaultManager) checkManagementSelection(routes []*route.Route, netID r
 	}
 }
 
-// pickPreferredExitNode chooses the single exit node to keep selected. In order:
-//   - a persisted user selection wins (deterministic if several survive from
-//     legacy state, so the set self-heals down to one);
-//   - otherwise activate only what management marks for auto-apply
-//     (SkipAutoApply=false); the lexicographically first if it marks several.
-//
-// Returns "" when neither holds — we never force an arbitrary exit node on. A
-// route the map doesn't auto-apply stays off until the user selects it.
-// info.userDeselected is informational only: an explicit deselect simply keeps
-// that route out of both lists above, so it can't be picked.
-func pickPreferredExitNode(info exitNodeInfo) route.NetID {
-	if len(info.userSelected) > 0 {
-		return minNetID(info.userSelected)
-	}
-	if len(info.selectedByManagement) > 0 {
-		return minNetID(info.selectedByManagement)
-	}
-	return ""
+func (m *DefaultManager) updateExitNodeSelections(info exitNodeInfo) {
+	routesToDeselect := m.getRoutesToDeselect(info.allIDs)
+	m.deselectExitNodes(routesToDeselect)
+	m.selectExitNodesByManagement(info.selectedByManagement, info.allIDs)
 }
 
-// enforceSingleExitNode makes preferred the only selected exit node: every other
-// available exit node is deselected and preferred (if any) is selected, without
-// disturbing non-exit route selections. A global deselect-all is left untouched
-// so the user's "all off" stays in effect.
-func (m *DefaultManager) enforceSingleExitNode(preferred route.NetID, allIDs []route.NetID) {
-	if m.routeSelector.IsDeselectAllActive() {
+func (m *DefaultManager) getRoutesToDeselect(allIDs []route.NetID) []route.NetID {
+	var routesToDeselect []route.NetID
+	for _, netID := range allIDs {
+		if !m.routeSelector.HasUserSelectionForRoute(netID) {
+			routesToDeselect = append(routesToDeselect, netID)
+		}
+	}
+	return routesToDeselect
+}
+
+func (m *DefaultManager) deselectExitNodes(routesToDeselect []route.NetID) {
+	if len(routesToDeselect) == 0 {
 		return
 	}
 
-	others := make([]route.NetID, 0, len(allIDs))
-	for _, id := range allIDs {
-		if id != preferred {
-			others = append(others, id)
-		}
-	}
-	if len(others) > 0 {
-		if err := m.routeSelector.DeselectRoutes(others, allIDs); err != nil {
-			log.Warnf("deselect other exit nodes: %v", err)
-		}
-	}
-	if preferred != "" {
-		if err := m.routeSelector.SelectRoutes([]route.NetID{preferred}, true, allIDs); err != nil {
-			log.Warnf("select preferred exit node %q: %v", preferred, err)
-		}
+	err := m.routeSelector.DeselectRoutes(routesToDeselect, routesToDeselect)
+	if err != nil {
+		log.Warnf("Failed to deselect exit nodes: %v", err)
 	}
 }
 
-func (m *DefaultManager) logExitNodeUpdate(info exitNodeInfo, preferred route.NetID) {
-	log.Debugf("Exit node selection: %d available, preferred=%q (%d user-selected, %d user-deselected, %d management-selected)",
-		len(info.allIDs), preferred, len(info.userSelected), len(info.userDeselected), len(info.selectedByManagement))
+func (m *DefaultManager) selectExitNodesByManagement(selectedByManagement []route.NetID, allIDs []route.NetID) {
+	if len(selectedByManagement) == 0 {
+		return
+	}
+
+	err := m.routeSelector.SelectRoutes(selectedByManagement, true, allIDs)
+	if err != nil {
+		log.Warnf("Failed to select exit nodes: %v", err)
+	}
 }
 
-// minNetID returns the lexicographically smallest NetID, for a deterministic
-// default pick that stays stable across restarts.
-func minNetID(ids []route.NetID) route.NetID {
-	if len(ids) == 0 {
-		return ""
-	}
-	best := ids[0]
-	for _, id := range ids[1:] {
-		if id < best {
-			best = id
-		}
-	}
-	return best
+func (m *DefaultManager) logExitNodeUpdate(info exitNodeInfo) {
+	log.Debugf("Updated route selector: %d exit nodes available, %d selected by management, %d user-selected, %d user-deselected",
+		len(info.allIDs), len(info.selectedByManagement), len(info.userSelected), len(info.userDeselected))
 }

client/internal/routemanager/manager_v6exit_test.go

@@ -0,0 +1,47 @@
+package routemanager
+
+import (
+	"net/netip"
+	"testing"
+
+	"github.com/stretchr/testify/assert"
+	"github.com/stretchr/testify/require"
+
+	"github.com/netbirdio/netbird/client/internal/routeselector"
+	"github.com/netbirdio/netbird/route"
+)
+
+// TestUpdateRouteSelectorFromManagement_MirrorsV6ExitPair reproduces the bug seen
+// in netbird-engine.log: persisted selector state has the v4 exit node deselected
+// but its synthesized "-v6" pair explicitly selected (orphaned), so the ::/0 route
+// leaked onto the tunnel. The management update must mirror the v4 deselect onto the
+// v6 pair so FilterSelectedExitNodes drops it.
+func TestUpdateRouteSelectorFromManagement_MirrorsV6ExitPair(t *testing.T) {
+	const (
+		v4ID = route.NetID("Exit Node (raspberrypi)")
+		v6ID = route.NetID("Exit Node (raspberrypi)-v6")
+	)
+	all := []route.NetID{v4ID, v6ID}
+
+	rs := routeselector.NewRouteSelector()
+	// Orphan the v6 selection: select the pair, then deselect only the v4 base.
+	require.NoError(t, rs.SelectRoutes([]route.NetID{v4ID, v6ID}, true, all))
+	require.NoError(t, rs.DeselectRoutes([]route.NetID{v4ID}, all))
+	require.True(t, rs.IsSelected(v6ID), "precondition: orphaned v6 selection survives v4 deselect")
+
+	m := &DefaultManager{routeSelector: rs}
+
+	v4Route := &route.Route{NetID: v4ID, Network: netip.MustParsePrefix("0.0.0.0/0")}
+	v6Route := &route.Route{NetID: v6ID, Network: netip.MustParsePrefix("::/0")}
+	clientRoutes := route.HAMap{
+		"Exit Node (raspberrypi)|0.0.0.0/0": {v4Route},
+		"Exit Node (raspberrypi)-v6|::/0":   {v6Route},
+	}
+
+	m.updateRouteSelectorFromManagement(clientRoutes)
+
+	assert.False(t, rs.IsSelected(v6ID), "v6 pair must follow the v4 base deselect after the management update")
+
+	filtered := rs.FilterSelectedExitNodes(clientRoutes)
+	assert.Empty(t, filtered, "deselected v4 exit node must not leak its ::/0 pair onto the tunnel")
+}

client/internal/routemanager/notifier/notifier_android.go

@@ -16,7 +16,7 @@ import (
 type Notifier struct {
 	initialRoutes []*route.Route
 	currentRoutes []*route.Route
-	fakeIPRoutes []*route.Route
+	fakeIPRoutes  []*route.Route
 
 	listener    listener.NetworkChangeListener
 	listenerMux sync.Mutex
@@ -119,3 +119,7 @@ func (n *Notifier) GetInitialRouteRanges() []string {
 	sort.Strings(initialStrings)
 	return initialStrings
 }
+
+func (n *Notifier) Close() {
+	// unused
+}

client/internal/routemanager/notifier/notifier_ios.go

@@ -3,6 +3,7 @@
 package notifier
 
 import (
+	"container/list"
 	"net/netip"
 	"slices"
 	"sort"
@@ -14,19 +15,26 @@ import (
 )
 
 type Notifier struct {
+	mu              sync.Mutex
+	cond            *sync.Cond
 	currentPrefixes []string
-
-	listener    listener.NetworkChangeListener
-	listenerMux sync.Mutex
+	listener        listener.NetworkChangeListener
+	queue           *list.List
+	closed          bool
 }
 
 func NewNotifier() *Notifier {
-	return &Notifier{}
+	n := &Notifier{
+		queue: list.New(),
+	}
+	n.cond = sync.NewCond(&n.mu)
+	go n.deliverLoop()
+	return n
 }
 
 func (n *Notifier) SetListener(listener listener.NetworkChangeListener) {
-	n.listenerMux.Lock()
-	defer n.listenerMux.Unlock()
+	n.mu.Lock()
+	defer n.mu.Unlock()
 	n.listener = listener
 }
 
@@ -43,32 +51,52 @@ func (n *Notifier) OnNewRoutes(route.HAMap) {
 }
 
 func (n *Notifier) OnNewPrefixes(prefixes []netip.Prefix) {
-	newNets := make([]string, 0)
+	newNets := make([]string, 0, len(prefixes))
 	for _, prefix := range prefixes {
 		newNets = append(newNets, prefix.String())
 	}
 
 	sort.Strings(newNets)
 
+	n.mu.Lock()
 	if slices.Equal(n.currentPrefixes, newNets) {
+		n.mu.Unlock()
 		return
 	}
-
 	n.currentPrefixes = newNets
-	n.notify()
+	routes := strings.Join(n.currentPrefixes, ",")
+	n.queue.PushBack(routes)
+	n.cond.Signal()
+	n.mu.Unlock()
 }
-func (n *Notifier) notify() {
-	n.listenerMux.Lock()
-	defer n.listenerMux.Unlock()
-	if n.listener == nil {
-		return
-	}
 
-	go func(l listener.NetworkChangeListener) {
-		l.OnNetworkChanged(strings.Join(n.currentPrefixes, ","))
-	}(n.listener)
+func (n *Notifier) Close() {
+	n.mu.Lock()
+	n.closed = true
+	n.cond.Signal()
+	n.mu.Unlock()
 }
 
 func (n *Notifier) GetInitialRouteRanges() []string {
 	return nil
 }
+
+func (n *Notifier) deliverLoop() {
+	for {
+		n.mu.Lock()
+		for n.queue.Len() == 0 && !n.closed {
+			n.cond.Wait()
+		}
+		if n.closed && n.queue.Len() == 0 {
+			n.mu.Unlock()
+			return
+		}
+		routes := n.queue.Remove(n.queue.Front()).(string)
+		l := n.listener
+		n.mu.Unlock()
+
+		if l != nil {
+			l.OnNetworkChanged(routes)
+		}
+	}
+}

client/internal/routemanager/notifier/notifier_other.go

@@ -38,3 +38,7 @@ func (n *Notifier) OnNewPrefixes(prefixes []netip.Prefix) {
 func (n *Notifier) GetInitialRouteRanges() []string {
 	return []string{}
 }
+
+func (n *Notifier) Close() {
+	// unused
+}

client/internal/routemanager/selector_management_test.go

@@ -0,0 +1,71 @@
+package routemanager
+
+import (
+	"net/netip"
+	"testing"
+
+	"github.com/stretchr/testify/require"
+
+	"github.com/netbirdio/netbird/client/internal/routeselector"
+	"github.com/netbirdio/netbird/route"
+)
+
+func exitNodeRoutes(netID route.NetID, skipAutoApply bool) route.HAMap {
+	haID := route.HAUniqueID(string(netID) + "|0.0.0.0/0")
+	return route.HAMap{
+		haID: []*route.Route{
+			{
+				ID:            "r-" + route.ID(netID),
+				NetID:         netID,
+				Network:       netip.MustParsePrefix("0.0.0.0/0"),
+				NetworkType:   route.IPv4Network,
+				Enabled:       true,
+				SkipAutoApply: skipAutoApply,
+			},
+		},
+	}
+}
+
+func TestUpdateRouteSelectorFromManagement(t *testing.T) {
+	t.Run("management auto-apply selects exit node without user selection", func(t *testing.T) {
+		m := &DefaultManager{routeSelector: routeselector.NewRouteSelector()}
+		routes := exitNodeRoutes("exit1", false)
+
+		m.updateRouteSelectorFromManagement(routes)
+
+		require.True(t, m.routeSelector.IsSelected("exit1"), "auto-apply exit node should be selected")
+		require.Len(t, m.routeSelector.FilterSelectedExitNodes(routes), 1, "selected exit node should pass the filter")
+	})
+
+	t.Run("management SkipAutoApply leaves exit node deselected", func(t *testing.T) {
+		m := &DefaultManager{routeSelector: routeselector.NewRouteSelector()}
+		routes := exitNodeRoutes("exit1", true)
+
+		m.updateRouteSelectorFromManagement(routes)
+
+		require.False(t, m.routeSelector.IsSelected("exit1"), "SkipAutoApply exit node should not be selected")
+		require.Empty(t, m.routeSelector.FilterSelectedExitNodes(routes), "deselected exit node should be filtered out")
+	})
+
+	t.Run("user selection is not overridden by management", func(t *testing.T) {
+		m := &DefaultManager{routeSelector: routeselector.NewRouteSelector()}
+		require.NoError(t, m.routeSelector.SelectRoutes([]route.NetID{"exit1"}, true, []route.NetID{"exit1"}))
+		routes := exitNodeRoutes("exit1", true)
+
+		m.updateRouteSelectorFromManagement(routes)
+
+		require.True(t, m.routeSelector.IsSelected("exit1"), "explicit user selection must survive a management sync that wants to skip auto-apply")
+		require.Len(t, m.routeSelector.FilterSelectedExitNodes(routes), 1, "user-selected exit node should pass the filter")
+	})
+
+	t.Run("deselect-all is preserved across a management sync", func(t *testing.T) {
+		m := &DefaultManager{routeSelector: routeselector.NewRouteSelector()}
+		m.routeSelector.DeselectAllRoutes()
+		routes := exitNodeRoutes("exit1", false)
+
+		m.updateRouteSelectorFromManagement(routes)
+
+		require.True(t, m.routeSelector.IsDeselectAll(), "an explicit deselect-all must not be cleared by management auto-apply")
+		require.Empty(t, m.routeSelector.FilterSelectedExitNodes(routes), "no routes should be selected while deselect-all is set")
+	})
+}

client/internal/routemanager/systemops/systemops_generic.go

@@ -121,9 +121,12 @@ func (r *SysOps) addRouteToNonVPNIntf(prefix netip.Prefix, vpnIntf wgIface, init
 		return Nexthop{}, vars.ErrRouteNotAllowed
 	}
 
-	// Check if the prefix is part of any local subnets
-	if isLocal, subnet := r.isPrefixInLocalSubnets(prefix); isLocal {
-		return Nexthop{}, fmt.Errorf("prefix %s is part of local subnet %s: %w", prefix, subnet, vars.ErrRouteNotAllowed)
+	// BSDs blackhole a /32 added inside a directly-connected subnet; Linux/Windows need it to beat the wt0 route.
+	switch runtime.GOOS {
+	case "darwin", "freebsd", "netbsd", "openbsd", "dragonfly":
+		if isLocal, subnet := r.isPrefixInLocalSubnets(prefix); isLocal {
+			return Nexthop{}, fmt.Errorf("prefix %s is part of local subnet %s: %w", prefix, subnet, vars.ErrRouteNotAllowed)
+		}
 	}
 
 	// Determine the exit interface and next hop for the prefix, so we can add a specific route

client/internal/routeselector/routeselector.go

@@ -4,7 +4,6 @@ import (
 	"encoding/json"
 	"fmt"
 	"slices"
-	"strings"
 	"sync"
 
 	"github.com/hashicorp/go-multierror"
@@ -116,6 +115,14 @@ func (rs *RouteSelector) DeselectAllRoutes() {
 	clear(rs.selectedRoutes)
 }
 
+// IsDeselectAll reports whether the user has explicitly deselected all routes.
+func (rs *RouteSelector) IsDeselectAll() bool {
+	rs.mu.RLock()
+	defer rs.mu.RUnlock()
+
+	return rs.deselectAll
+}
+
 // IsSelected checks if a specific route is selected.
 func (rs *RouteSelector) IsSelected(routeID route.NetID) bool {
 	rs.mu.RLock()
@@ -124,14 +131,31 @@ func (rs *RouteSelector) IsSelected(routeID route.NetID) bool {
 	return rs.isSelectedLocked(routeID)
 }
 
-// IsDeselectAllActive reports whether the global "deselect all" flag is set,
-// i.e. the user disabled every route. Callers enforcing per-route invariants
-// (e.g. single exit node) should leave the selection untouched when it is.
-func (rs *RouteSelector) IsDeselectAllActive() bool {
-	rs.mu.RLock()
-	defer rs.mu.RUnlock()
+// SyncPairedSelection forces pairedID's explicit selection state to match baseID's,
+// so a synthesized "-v6" exit route always follows its v4 base: selecting or
+// deselecting the v4 exit node governs the ::/0 pair, and any stale (orphaned)
+// explicit state on the v6 entry is reset. The v4/v6 exit pair is treated as a single
+// toggle, so the v6 entry carries no independent selection of its own.
+func (rs *RouteSelector) SyncPairedSelection(baseID, pairedID route.NetID) {
+	rs.mu.Lock()
+	defer rs.mu.Unlock()
 
-	return rs.deselectAll
+	if rs.deselectAll {
+		return
+	}
+
+	_, baseSelected := rs.selectedRoutes[baseID]
+	_, baseDeselected := rs.deselectedRoutes[baseID]
+
+	delete(rs.selectedRoutes, pairedID)
+	delete(rs.deselectedRoutes, pairedID)
+
+	switch {
+	case baseSelected:
+		rs.selectedRoutes[pairedID] = struct{}{}
+	case baseDeselected:
+		rs.deselectedRoutes[pairedID] = struct{}{}
+	}
 }
 
 // FilterSelected removes unselected routes from the provided map.
@@ -153,14 +177,13 @@ func (rs *RouteSelector) FilterSelected(routes route.HAMap) route.HAMap {
 }
 
 // HasUserSelectionForRoute returns true if the user has explicitly selected or deselected this route.
-// Intended for exit-node code paths: a v6 exit-node pair (e.g. "MyExit-v6") with no explicit state of
-// its own inherits its v4 base's state, so legacy persisted selections that predate v6 pairing
-// transparently apply to the synthesized v6 entry.
+// The lookup is literal; v4/v6 exit pairs are kept consistent at write time via SyncPairedSelection,
+// so a synthesized "-v6" entry carries the same explicit state as its v4 base.
 func (rs *RouteSelector) HasUserSelectionForRoute(routeID route.NetID) bool {
 	rs.mu.RLock()
 	defer rs.mu.RUnlock()
 
-	return rs.hasUserSelectionForRouteLocked(rs.effectiveNetID(routeID))
+	return rs.hasUserSelectionForRouteLocked(routeID)
 }
 
 func (rs *RouteSelector) FilterSelectedExitNodes(routes route.HAMap) route.HAMap {
@@ -189,83 +212,6 @@ func (rs *RouteSelector) FilterSelectedExitNodes(routes route.HAMap) route.HAMap
 	return filtered
 }
 
-// effectiveNetID returns the v4 base for a "-v6" exit pair entry that has no explicit
-// state of its own, so selections made on the v4 entry govern the v6 entry automatically.
-// Only call this from exit-node-specific code paths: applying it to a non-exit "-v6" route
-// would make it inherit unrelated v4 state. Must be called with rs.mu held.
-func (rs *RouteSelector) effectiveNetID(id route.NetID) route.NetID {
-	name := string(id)
-	if !strings.HasSuffix(name, route.V6ExitSuffix) {
-		return id
-	}
-	if _, ok := rs.selectedRoutes[id]; ok {
-		return id
-	}
-	if _, ok := rs.deselectedRoutes[id]; ok {
-		return id
-	}
-	return route.NetID(strings.TrimSuffix(name, route.V6ExitSuffix))
-}
-
-func (rs *RouteSelector) isSelectedLocked(routeID route.NetID) bool {
-	if rs.deselectAll {
-		return false
-	}
-	_, deselected := rs.deselectedRoutes[routeID]
-	return !deselected
-}
-
-func (rs *RouteSelector) isDeselectedLocked(netID route.NetID) bool {
-	if rs.deselectAll {
-		return true
-	}
-	_, deselected := rs.deselectedRoutes[netID]
-	return deselected
-}
-
-func (rs *RouteSelector) hasUserSelectionForRouteLocked(routeID route.NetID) bool {
-	_, selected := rs.selectedRoutes[routeID]
-	_, deselected := rs.deselectedRoutes[routeID]
-	return selected || deselected
-}
-
-func isExitNode(rt []*route.Route) bool {
-	return len(rt) > 0 && (route.IsV4DefaultRoute(rt[0].Network) || route.IsV6DefaultRoute(rt[0].Network))
-}
-
-func (rs *RouteSelector) applyExitNodeFilter(
-	id route.HAUniqueID,
-	netID route.NetID,
-	rt []*route.Route,
-	out route.HAMap,
-) {
-	// Exit-node path: apply the v4/v6 pair mirror so a deselect on the v4 base also
-	// drops the synthesized v6 entry that lacks its own explicit state.
-	effective := rs.effectiveNetID(netID)
-	if rs.hasUserSelectionForRouteLocked(effective) {
-		if rs.isSelectedLocked(effective) {
-			out[id] = rt
-		}
-		return
-	}
-
-	// no explicit selection for this route: defer to management's SkipAutoApply flag
-	sel := collectSelected(rt)
-	if len(sel) > 0 {
-		out[id] = sel
-	}
-}
-
-func collectSelected(rt []*route.Route) []*route.Route {
-	var sel []*route.Route
-	for _, r := range rt {
-		if !r.SkipAutoApply {
-			sel = append(sel, r)
-		}
-	}
-	return sel
-}
-
 // MarshalJSON implements the json.Marshaler interface
 func (rs *RouteSelector) MarshalJSON() ([]byte, error) {
 	rs.mu.RLock()
@@ -319,3 +265,59 @@ func (rs *RouteSelector) UnmarshalJSON(data []byte) error {
 
 	return nil
 }
+
+func (rs *RouteSelector) isSelectedLocked(routeID route.NetID) bool {
+	if rs.deselectAll {
+		return false
+	}
+	_, deselected := rs.deselectedRoutes[routeID]
+	return !deselected
+}
+
+func (rs *RouteSelector) isDeselectedLocked(netID route.NetID) bool {
+	if rs.deselectAll {
+		return true
+	}
+	_, deselected := rs.deselectedRoutes[netID]
+	return deselected
+}
+
+func (rs *RouteSelector) hasUserSelectionForRouteLocked(routeID route.NetID) bool {
+	_, selected := rs.selectedRoutes[routeID]
+	_, deselected := rs.deselectedRoutes[routeID]
+	return selected || deselected
+}
+
+func (rs *RouteSelector) applyExitNodeFilter(
+	id route.HAUniqueID,
+	netID route.NetID,
+	rt []*route.Route,
+	out route.HAMap,
+) {
+	if rs.hasUserSelectionForRouteLocked(netID) {
+		if rs.isSelectedLocked(netID) {
+			out[id] = rt
+		}
+		return
+	}
+
+	// no explicit selection for this route: defer to management's SkipAutoApply flag
+	sel := collectSelected(rt)
+	if len(sel) > 0 {
+		out[id] = sel
+	}
+}
+
+func isExitNode(rt []*route.Route) bool {
+	return len(rt) > 0 && (route.IsV4DefaultRoute(rt[0].Network) || route.IsV6DefaultRoute(rt[0].Network))
+}
+
+func collectSelected(rt []*route.Route) []*route.Route {
+	var sel []*route.Route
+	for _, r := range rt {
+		if !r.SkipAutoApply {
+			sel = append(sel, r)
+		}
+	}
+	return sel
+}

client/internal/routeselector/routeselector_test.go

@@ -330,39 +330,73 @@ func TestRouteSelector_FilterSelectedExitNodes(t *testing.T) {
 	assert.Len(t, filtered, 0) // No routes should be selected
 }
 
-// TestRouteSelector_V6ExitPairInherits covers the v4/v6 exit-node pair selection
-// mirror. The mirror is scoped to exit-node code paths: HasUserSelectionForRoute
-// and FilterSelectedExitNodes resolve a "-v6" entry without explicit state to its
-// v4 base, so legacy persisted selections that predate v6 pairing transparently
-// apply to the synthesized v6 entry. General lookups (IsSelected, FilterSelected)
-// stay literal so unrelated routes named "*-v6" don't inherit unrelated state.
-func TestRouteSelector_V6ExitPairInherits(t *testing.T) {
+// TestRouteSelector_V6ExitPairSync covers SyncPairedSelection, which keeps a v4
+// exit node and its synthesized "-v6" counterpart consistent. The selector itself
+// is literal and never infers a v6 entry's state from its v4 base; callers that know
+// the pairing (exit-node code paths) call SyncPairedSelection to force the v6 entry
+// to follow the base, treating the pair as a single toggle.
+func TestRouteSelector_V6ExitPairSync(t *testing.T) {
 	all := []route.NetID{"exit1", "exit1-v6", "exit2", "exit2-v6", "corp", "corp-v6"}
 
-	t.Run("HasUserSelectionForRoute mirrors deselected v4 base", func(t *testing.T) {
+	t.Run("selector lookups stay literal without sync", func(t *testing.T) {
 		rs := routeselector.NewRouteSelector()
 		require.NoError(t, rs.DeselectRoutes([]route.NetID{"exit1"}, all))
 
-		assert.True(t, rs.HasUserSelectionForRoute("exit1-v6"), "v6 pair sees v4 base's user selection")
+		// The selector does not pair-resolve: the v6 entry is independent until synced.
+		assert.False(t, rs.HasUserSelectionForRoute("exit1-v6"), "v6 entry has no state of its own")
+		assert.True(t, rs.IsSelected("exit1-v6"), "unsynced v6 entry stays selected by default")
 
-		// unrelated v6 with no v4 base touched is unaffected
-		assert.False(t, rs.HasUserSelectionForRoute("exit2-v6"))
+		// A route literally named "exit1-something" must never pair-resolve either.
+		assert.False(t, rs.HasUserSelectionForRoute("exit1-something"))
 	})
 
-	t.Run("IsSelected stays literal for non-exit lookups", func(t *testing.T) {
-		rs := routeselector.NewRouteSelector()
-		require.NoError(t, rs.DeselectRoutes([]route.NetID{"corp"}, all))
-
-		// A non-exit route literally named "corp-v6" must not inherit "corp"'s state
-		// via the mirror; the mirror only applies in exit-node code paths.
-		assert.False(t, rs.IsSelected("corp"))
-		assert.True(t, rs.IsSelected("corp-v6"), "non-exit *-v6 routes must not inherit unrelated v4 state")
-	})
-
-	t.Run("explicit v6 state overrides v4 base in filter", func(t *testing.T) {
+	t.Run("sync mirrors deselected v4 base onto v6", func(t *testing.T) {
 		rs := routeselector.NewRouteSelector()
 		require.NoError(t, rs.DeselectRoutes([]route.NetID{"exit1"}, all))
+
+		rs.SyncPairedSelection("exit1", "exit1-v6")
+
+		assert.False(t, rs.IsSelected("exit1"))
+		assert.False(t, rs.IsSelected("exit1-v6"), "v6 pair follows v4 base deselect")
+		assert.True(t, rs.HasUserSelectionForRoute("exit1-v6"), "v6 carries explicit deselect after sync")
+	})
+
+	t.Run("sync mirrors selected v4 base onto v6", func(t *testing.T) {
+		rs := routeselector.NewRouteSelector()
+		require.NoError(t, rs.SelectRoutes([]route.NetID{"exit1"}, false, all))
+
+		rs.SyncPairedSelection("exit1", "exit1-v6")
+
+		assert.True(t, rs.IsSelected("exit1"))
+		assert.True(t, rs.IsSelected("exit1-v6"), "v6 pair follows v4 base select")
+	})
+
+	t.Run("sync clears v6 state when base has no explicit selection", func(t *testing.T) {
+		rs := routeselector.NewRouteSelector()
 		require.NoError(t, rs.SelectRoutes([]route.NetID{"exit1-v6"}, true, all))
+		require.True(t, rs.HasUserSelectionForRoute("exit1-v6"))
+
+		rs.SyncPairedSelection("exit1", "exit1-v6")
+
+		assert.False(t, rs.HasUserSelectionForRoute("exit1-v6"),
+			"v6 explicit state is cleared so it follows management like its base")
+	})
+
+	// Regression for the observed bug (see netbird-engine.log): persisted state has
+	// the v4 base deselected but the v6 sibling explicitly selected (orphaned). The
+	// sync must reset the orphan so the ::/0 route does not leak onto the tunnel.
+	t.Run("sync clears orphaned explicit v6 selection on deselected base", func(t *testing.T) {
+		rs := routeselector.NewRouteSelector()
+
+		// Prior state: both explicitly selected, then only the v4 base deselected,
+		// leaving the v6 entry as a stale explicit selection.
+		require.NoError(t, rs.SelectRoutes([]route.NetID{"exit1", "exit1-v6"}, true, all))
+		require.NoError(t, rs.DeselectRoutes([]route.NetID{"exit1"}, all))
+		require.True(t, rs.IsSelected("exit1-v6"), "precondition: orphaned v6 selection")
+
+		rs.SyncPairedSelection("exit1", "exit1-v6")
+
+		assert.False(t, rs.IsSelected("exit1-v6"), "orphaned v6 selection reset to follow v4 deselect")
 
 		v4Route := &route.Route{NetID: "exit1", Network: netip.MustParsePrefix("0.0.0.0/0")}
 		v6Route := &route.Route{NetID: "exit1-v6", Network: netip.MustParsePrefix("::/0")}
@@ -370,23 +404,14 @@ func TestRouteSelector_V6ExitPairInherits(t *testing.T) {
 			"exit1|0.0.0.0/0": {v4Route},
 			"exit1-v6|::/0":   {v6Route},
 		}
-
 		filtered := rs.FilterSelectedExitNodes(routes)
-		assert.NotContains(t, filtered, route.HAUniqueID("exit1|0.0.0.0/0"))
-		assert.Contains(t, filtered, route.HAUniqueID("exit1-v6|::/0"), "explicit v6 select wins over v4 base")
+		assert.Empty(t, filtered, "deselecting v4 base must drop the v6 pair even if it was explicitly selected before")
 	})
 
-	t.Run("non-v6-suffix routes unaffected", func(t *testing.T) {
-		rs := routeselector.NewRouteSelector()
-		require.NoError(t, rs.DeselectRoutes([]route.NetID{"exit1"}, all))
-
-		// A route literally named "exit1-something" must not pair-resolve.
-		assert.False(t, rs.HasUserSelectionForRoute("exit1-something"))
-	})
-
-	t.Run("filter v6 paired with deselected v4 base", func(t *testing.T) {
+	t.Run("filter drops synced v6 pair of deselected v4 base", func(t *testing.T) {
 		rs := routeselector.NewRouteSelector()
 		require.NoError(t, rs.DeselectRoutes([]route.NetID{"exit1"}, all))
+		rs.SyncPairedSelection("exit1", "exit1-v6")
 
 		v4Route := &route.Route{NetID: "exit1", Network: netip.MustParsePrefix("0.0.0.0/0")}
 		v6Route := &route.Route{NetID: "exit1-v6", Network: netip.MustParsePrefix("::/0")}
@@ -399,6 +424,15 @@ func TestRouteSelector_V6ExitPairInherits(t *testing.T) {
 		assert.Empty(t, filtered, "deselecting v4 base must also drop the v6 pair")
 	})
 
+	t.Run("deselectAll makes sync a no-op", func(t *testing.T) {
+		rs := routeselector.NewRouteSelector()
+		rs.DeselectAllRoutes()
+
+		rs.SyncPairedSelection("exit1", "exit1-v6")
+
+		assert.False(t, rs.HasUserSelectionForRoute("exit1-v6"), "sync must not write explicit state under deselectAll")
+	})
+
 	t.Run("non-exit *-v6 routes pass through FilterSelectedExitNodes", func(t *testing.T) {
 		rs := routeselector.NewRouteSelector()
 		require.NoError(t, rs.DeselectRoutes([]route.NetID{"corp"}, all))

client/internal/state.go

@@ -2,10 +2,7 @@ package internal
 
 import (
 	"context"
-	"runtime"
 	"sync"
-
-	log "github.com/sirupsen/logrus"
 )
 
 type StatusType string
@@ -36,37 +33,17 @@ func CtxGetState(ctx context.Context) *contextState {
 }
 
 type contextState struct {
-	err      error
-	status   StatusType
-	mutex    sync.Mutex
-	onChange func()
-}
-
-// SetOnChange installs a callback fired after every successful Set. Used by
-// the daemon to wire the status recorder's notifyStateChange so any
-// state.Set in the connect/login paths pushes a fresh snapshot to
-// SubscribeStatus subscribers without each callsite having to opt in.
-// The callback runs outside the contextState mutex to avoid a lock-order
-// dependency with the recorder's stateChangeMux.
-func (c *contextState) SetOnChange(fn func()) {
-	c.mutex.Lock()
-	c.onChange = fn
-	c.mutex.Unlock()
+	err    error
+	status StatusType
+	mutex  sync.Mutex
 }
 
 func (c *contextState) Set(update StatusType) {
-	if _, file, line, ok := runtime.Caller(1); ok {
-		log.Infof("--- state.Set(%s) from %s:%d", update, file, line)
-	}
 	c.mutex.Lock()
+	defer c.mutex.Unlock()
+
 	c.status = update
 	c.err = nil
-	cb := c.onChange
-	c.mutex.Unlock()
-
-	if cb != nil {
-		cb()
-	}
 }
 
 func (c *contextState) Status() (StatusType, error) {
@@ -80,17 +57,6 @@ func (c *contextState) Status() (StatusType, error) {
 	return c.status, nil
 }
 
-// CurrentStatus returns the last status set via Set, ignoring any wrapped
-// error. Use when the status is needed for reporting purposes (e.g. the
-// status snapshot stream) and a transient wrapped error from a retry loop
-// shouldn't blank out the underlying status.
-func (c *contextState) CurrentStatus() StatusType {
-	c.mutex.Lock()
-	defer c.mutex.Unlock()
-
-	return c.status
-}
-
 func (c *contextState) Wrap(err error) error {
 	c.mutex.Lock()
 	defer c.mutex.Unlock()

client/internal/syncstore/disk.go

@@ -0,0 +1,99 @@
+package syncstore
+
+import (
+	"context"
+	"errors"
+	"fmt"
+	"os"
+	"path/filepath"
+	"sync"
+
+	log "github.com/sirupsen/logrus"
+	"google.golang.org/protobuf/proto"
+
+	mgmProto "github.com/netbirdio/netbird/shared/management/proto"
+	"github.com/netbirdio/netbird/util"
+)
+
+// syncResponseFileName is the name of the file the sync response is serialized
+// to, placed inside the configured directory (the state directory).
+const syncResponseFileName = "networkmap.pb"
+
+// diskStore serializes the latest sync response to a file on disk instead of
+// keeping it in memory. This trades disk I/O for a much smaller memory
+// footprint, which matters on memory-constrained platforms (iOS).
+type diskStore struct {
+	mu   sync.Mutex
+	path string
+}
+
+// NewDiskStore returns a Store that serializes the sync response to a file in
+// the given directory. If dir is empty it falls back to the OS temp directory.
+//
+// Any file left over from a previous run is removed on construction so a fresh
+// store never reads stale data (e.g. another profile's network map).
+func NewDiskStore(dir string) Store {
+	if dir == "" {
+		dir = os.TempDir()
+	}
+	s := &diskStore{
+		path: filepath.Join(dir, syncResponseFileName),
+	}
+	if err := s.Clear(); err != nil {
+		log.Warnf("failed to clear stale sync response file: %v", err)
+	}
+	return s
+}
+
+func (s *diskStore) Set(resp *mgmProto.SyncResponse) error {
+	if resp == nil {
+		return s.Clear()
+	}
+
+	bs, err := proto.Marshal(resp)
+	if err != nil {
+		return fmt.Errorf("marshal sync response: %w", err)
+	}
+
+	s.mu.Lock()
+	defer s.mu.Unlock()
+
+	if err := util.WriteBytesWithRestrictedPermission(context.Background(), s.path, bs); err != nil {
+		return fmt.Errorf("write sync response to %s: %w", s.path, err)
+	}
+
+	log.Debugf("sync response persisted to %s (%d bytes)", s.path, len(bs))
+	return nil
+}
+
+func (s *diskStore) Get() (*mgmProto.SyncResponse, error) {
+	s.mu.Lock()
+	defer s.mu.Unlock()
+
+	bs, err := os.ReadFile(s.path)
+	if err != nil {
+		if errors.Is(err, os.ErrNotExist) {
+			//nolint:nilnil // nil,nil means "nothing stored", per the Store contract; preserve the original behaviour
+			return nil, nil
+		}
+		return nil, fmt.Errorf("read sync response from %s: %w", s.path, err)
+	}
+
+	resp := &mgmProto.SyncResponse{}
+	if err := proto.Unmarshal(bs, resp); err != nil {
+		return nil, fmt.Errorf("unmarshal sync response: %w", err)
+	}
+
+	log.Debugf("retrieving latest sync response from %s (%d bytes)", s.path, len(bs))
+	return resp, nil
+}
+
+func (s *diskStore) Clear() error {
+	s.mu.Lock()
+	defer s.mu.Unlock()
+
+	if err := os.Remove(s.path); err != nil && !errors.Is(err, os.ErrNotExist) {
+		return fmt.Errorf("remove sync response file %s: %w", s.path, err)
+	}
+	return nil
+}

client/internal/syncstore/factory_ios.go

@@ -0,0 +1,9 @@
+//go:build ios
+
+package syncstore
+
+// New returns the platform default store. On iOS the sync response is
+// serialized to disk (in dir) to keep it out of the constrained process memory.
+func New(dir string) Store {
+	return NewDiskStore(dir)
+}

client/internal/syncstore/factory_other.go

@@ -0,0 +1,9 @@
+//go:build !ios
+
+package syncstore
+
+// New returns the platform default store. On all non-iOS platforms the sync
+// response is kept in memory; dir is unused.
+func New(_ string) Store {
+	return NewMemoryStore()
+}