[client, proxy] IPv6 in-place apply + accept-loop hardening on netstack listeners

Two related fixes for the embedded netbird client and the per-account
inbound listeners that ride on its gVisor netstack.

client/internal/engine.go — replace hasIPv6Changed with reconcileIPv6:

  - First v6 assignment (current had no v6, conf carries one) is applied
    in place via WGIface.UpdateAddr instead of returning ErrResetConnection.
    Pre-fix, every embedded client whose account had IPv6 enabled would
    reset on its first NetworkMap sync — boot config has no v6, the sync
    introduces one, the engine tore itself down to "apply" it. That
    teardown destroys the gVisor netstack and orphans every listener
    bound on it, which is what made the proxy's per-account :80/:443
    silently stop accepting traffic.
  - v6 removed clears in place.
  - v6 swapped to a different non-empty value still resets (gVisor
    netstack can't safely swap its address at runtime).
  - Mutates e.config.WgAddr to match the applied state so subsequent
    PeerConfig comparisons are stable.

proxy/internal/tcp/accept.go (new) + proxy/inbound.go +
proxy/internal/tcp/router.go — harden the two Accept() loops on
netstack-backed listeners:

  - IsClosedListenerErr recognises net.ErrClosed AND gVisor's
    "endpoint is in invalid state" — the latter survives gonet's
    *net.OpError wrapping in a way errors.Is(.., net.ErrClosed) does
    not. Without this the loop spins CPU-hot after the underlying
    netstack is destroyed (peer rekey, embedded-client reset, account
    churn), emitting one log line per iteration.
  - AcceptBackoff implements the exponential backoff that
    net/http.Server.Serve uses on transient Accept errors: 5ms doubling
    up to 1s. Defence-in-depth so an unknown sticky error cannot burn
    a CPU core even if IsClosedListenerErr misses its signature.

proxy/internal/roundtrip/netbird.go — emit a single structured INFO
line summarising every embed.Options flag (account_id, service_id,
public_key, management_url, wg_port, block_inbound, block_lan_access,
disable_ipv6, no_userspace, presence of credentials) when each
per-account embedded client is created. Secrets reduced to a "present"
boolean — never logged verbatim. Diagnostic-only; no behavior change,
but it makes the "why is this embedded peer misbehaving" loop a single
log read instead of a code dive.

Tests (real listeners, scripted errors, no mocks of production code):
  - engine_reconcileipv6_test.go: 8 cases for every transition (first
    assignment, no change, removed, prefix-length changed, value
    changed, invalid bytes, UpdateAddr error) plus a updateConfig
    integration check that the fix actually fires on a v6-added
    PeerConfig.
  - accept_test.go: IsClosedListenerErr matrix + AcceptBackoff
    progression / cap / reset / cancel-during-wait / cancel-before-call.
  - router_test.go, inbound_test.go: scriptedAcceptListener +
    TestRouter_Serve_ExitsOnGVisorInvalidEndpoint and
    TestFeedRouterFromListener_ExitsOnGVisorInvalidEndpoint —
    regression guards that fail in 2 s if the loop ever spins.

.github/dependabot.yml

@@ -0,0 +1,45 @@
+version: 2
+updates:
+  - package-ecosystem: "github-actions"
+    directory: "/"
+    schedule:
+      interval: "daily"
+    open-pull-requests-limit: 15
+    groups:
+      actions:
+        patterns:
+          - "*"
+    ignore:
+      # git-town/action v1.3.x crashes on cyclic PR graphs (self-loop main->main
+      # fork PRs) via its topological-sort visualization. Pinned to v1.2.1 in
+      # git-town.yml; block v1.3.x until upstream tolerates cyclic edges.
+      - dependency-name: "git-town/action"
+        update-types:
+          - "version-update:semver-minor"
+          - "version-update:semver-major"
+
+  - package-ecosystem: "gomod"
+    directories:
+      - "/"
+    schedule:
+      interval: "daily"
+    open-pull-requests-limit: 15
+    groups:
+      aws-sdk:
+        patterns:
+          - "github.com/aws/aws-sdk-go-v2/*"
+      pion:
+        patterns:
+          - "github.com/pion/*"
+      gorm:
+        patterns:
+          - "gorm.io/*"
+      otel:
+        patterns:
+          - "go.opentelemetry.io/*"
+      testcontainers:
+        patterns:
+          - "github.com/testcontainers/testcontainers-go/*"
+      wireguard:
+        patterns:
+          - "golang.zx2c4.com/wireguard*"

.github/pull_request_template.md

@@ -12,6 +12,7 @@
 - [ ] Is a feature enhancement
 - [ ] It is a refactor
 - [ ] Created tests that fail without the change (if possible)
+- [ ] This change does **not** modify the public API, gRPC protocols, functionality behavior, CLI / service flags, or introduce a new feature — **OR** I have discussed it with the NetBird team beforehand (link the issue / Slack thread in the description). See [CONTRIBUTING.md](https://github.com/netbirdio/netbird/blob/main/CONTRIBUTING.md#discuss-changes-with-the-netbird-team-first).
 
 > By submitting this pull request, you confirm that you have read and agree to the terms of the [Contributor License Agreement](https://github.com/netbirdio/netbird/blob/main/CONTRIBUTOR_LICENSE_AGREEMENT.md).
 

.github/workflows/check-license-dependencies.yml

@@ -2,16 +2,16 @@ name: Check License Dependencies
 
 on:
   push:
-    branches: [ main ]
+    branches: [main]
     paths:
-      - 'go.mod'
-      - 'go.sum'
-      - '.github/workflows/check-license-dependencies.yml'
+      - "go.mod"
+      - "go.sum"
+      - ".github/workflows/check-license-dependencies.yml"
   pull_request:
     paths:
-      - 'go.mod'
-      - 'go.sum'
-      - '.github/workflows/check-license-dependencies.yml'
+      - "go.mod"
+      - "go.sum"
+      - ".github/workflows/check-license-dependencies.yml"
 
 jobs:
   check-internal-dependencies:
@@ -19,7 +19,10 @@ jobs:
     runs-on: ubuntu-latest
 
     steps:
-      - uses: actions/checkout@v4
+      - name: Checkout code
+        uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
+        with:
+          persist-credentials: false
 
       - name: Check for problematic license dependencies
         run: |
@@ -56,55 +59,57 @@ jobs:
     runs-on: ubuntu-latest
 
     steps:
-    - uses: actions/checkout@v4
+      - uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
+        with:
+          persist-credentials: false
 
-    - name: Set up Go
-      uses: actions/setup-go@v5
-      with:
-        go-version-file: 'go.mod'
-        cache: true
+      - name: Set up Go
+        uses: actions/setup-go@4b73464bb391d4059bd26b0524d20df3927bd417 # v6.3.0
+        with:
+          go-version-file: "go.mod"
+          cache: true
 
-    - name: Install go-licenses
-      run: go install github.com/google/go-licenses@v1.6.0
+      - name: Install go-licenses
+        run: go install github.com/google/go-licenses@v1.6.0
 
-    - name: Check for GPL/AGPL licensed dependencies
-      run: |
-        echo "Checking for GPL/AGPL/LGPL licensed dependencies..."
-        echo ""
-
-        # Check all Go packages for copyleft licenses, excluding internal netbird packages
-        COPYLEFT_DEPS=$(go-licenses report ./... 2>/dev/null | grep -E 'GPL|AGPL|LGPL' | grep -v 'github.com/netbirdio/netbird/' || true)
-
-        if [ -n "$COPYLEFT_DEPS" ]; then
-          echo "Found copyleft licensed dependencies:"
-          echo "$COPYLEFT_DEPS"
+      - name: Check for GPL/AGPL licensed dependencies
+        run: |
+          echo "Checking for GPL/AGPL/LGPL licensed dependencies..."
           echo ""
 
-          # Filter out dependencies that are only pulled in by internal AGPL packages
-          INCOMPATIBLE=""
-          while IFS=',' read -r package url license; do
-            if echo "$license" | grep -qE 'GPL-[0-9]|AGPL-[0-9]|LGPL-[0-9]'; then
-              # Find ALL packages that import this GPL package using go list
-              IMPORTERS=$(go list -json -deps ./... 2>/dev/null | jq -r "select(.Imports[]? == \"$package\") | .ImportPath")
+          # Check all Go packages for copyleft licenses, excluding internal netbird packages
+          COPYLEFT_DEPS=$(go-licenses report ./... 2>/dev/null | grep -E 'GPL|AGPL|LGPL' | grep -v 'github.com/netbirdio/netbird/' || true)
 
-              # Check if any importer is NOT in management/signal/relay
-              BSD_IMPORTER=$(echo "$IMPORTERS" | grep -v "github.com/netbirdio/netbird/\(management\|signal\|relay\|proxy\|combined\|tools/idp-migrate\)" | head -1)
-
-              if [ -n "$BSD_IMPORTER" ]; then
-                echo "❌ $package ($license) is imported by BSD-licensed code: $BSD_IMPORTER"
-                INCOMPATIBLE="${INCOMPATIBLE}${package},${url},${license}\n"
-              else
-                echo "✓ $package ($license) is only used by internal AGPL packages - OK"
-              fi
-            fi
-          done <<< "$COPYLEFT_DEPS"
-
-          if [ -n "$INCOMPATIBLE" ]; then
+          if [ -n "$COPYLEFT_DEPS" ]; then
+            echo "Found copyleft licensed dependencies:"
+            echo "$COPYLEFT_DEPS"
             echo ""
-            echo "❌ INCOMPATIBLE licenses found that are used by BSD-licensed code:"
-            echo -e "$INCOMPATIBLE"
-            exit 1
-          fi
-        fi
 
-        echo "✅ All external license dependencies are compatible with BSD-3-Clause"
+            # Filter out dependencies that are only pulled in by internal AGPL packages
+            INCOMPATIBLE=""
+            while IFS=',' read -r package url license; do
+              if echo "$license" | grep -qE 'GPL-[0-9]|AGPL-[0-9]|LGPL-[0-9]'; then
+                # Find ALL packages that import this GPL package using go list
+                IMPORTERS=$(go list -json -deps ./... 2>/dev/null | jq -r "select(.Imports[]? == \"$package\") | .ImportPath")
+
+                # Check if any importer is NOT in management/signal/relay
+                BSD_IMPORTER=$(echo "$IMPORTERS" | grep -v "github.com/netbirdio/netbird/\(management\|signal\|relay\|proxy\|combined\|tools/idp-migrate\)" | head -1)
+
+                if [ -n "$BSD_IMPORTER" ]; then
+                  echo "❌ $package ($license) is imported by BSD-licensed code: $BSD_IMPORTER"
+                  INCOMPATIBLE="${INCOMPATIBLE}${package},${url},${license}\n"
+                else
+                  echo "✓ $package ($license) is only used by internal AGPL packages - OK"
+                fi
+              fi
+            done <<< "$COPYLEFT_DEPS"
+
+            if [ -n "$INCOMPATIBLE" ]; then
+              echo ""
+              echo "❌ INCOMPATIBLE licenses found that are used by BSD-licensed code:"
+              echo -e "$INCOMPATIBLE"
+              exit 1
+            fi
+          fi
+
+          echo "✅ All external license dependencies are compatible with BSD-3-Clause"

.github/workflows/docs-ack.yml

@@ -83,7 +83,7 @@ jobs:
 
       - name: Verify docs PR exists (and is open or merged)
         if: steps.validate.outputs.mode == 'added'
-        uses: actions/github-script@v7
+        uses: actions/github-script@3a2844b7e9c422d3c10d287c895573f7108da1b3 # v9.0.0
         id: verify
         with:
           pr_number: ${{ steps.extract.outputs.pr_number }}

.github/workflows/forum.yml

@@ -8,11 +8,10 @@ jobs:
   post:
     runs-on: ubuntu-latest
     steps:
-      - uses: roots/discourse-topic-github-release-action@main
+      - uses: roots/discourse-topic-github-release-action@557d74ea05b6cc0c47f555c1d5d28a89d904005b # v1.1.0
         with:
           discourse-api-key: ${{ secrets.DISCOURSE_RELEASES_API_KEY }}
           discourse-base-url: https://forum.netbird.io
           discourse-author-username: NetBird
           discourse-category: 17
-          discourse-tags:
-            releases
+          discourse-tags: releases

.github/workflows/git-town.yml

@@ -3,7 +3,7 @@ name: Git Town
 on:
   pull_request:
     branches:
-      - '**'
+      - "**"
 
 jobs:
   git-town:
@@ -15,7 +15,9 @@ jobs:
       pull-requests: write
 
     steps:
-      - uses: actions/checkout@v4
-      - uses: git-town/action@v1.2.1
+      - uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
+        with:
+          persist-credentials: false
+      - uses: git-town/action@3d8b878379abb1ee393fb49865a28b4a6c2cd3b0 # v1.2.1
         with:
           skip-single-stacks: true

.github/workflows/golang-test-darwin.yml

@@ -16,16 +16,18 @@ jobs:
     runs-on: macos-latest
     steps:
       - name: Checkout code
-        uses: actions/checkout@v4
+        uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
+        with:
+          persist-credentials: false
 
       - name: Install Go
-        uses: actions/setup-go@v5
+        uses: actions/setup-go@4b73464bb391d4059bd26b0524d20df3927bd417 # v6.3.0
         with:
           go-version-file: "go.mod"
           cache: false
 
       - name: Cache Go modules
-        uses: actions/cache@v4
+        uses: actions/cache@27d5ce7f107fe9357f9df03efb73ab90386fccae # v5.0.5
         with:
           path: ~/go/pkg/mod
           key: macos-gotest-${{ hashFiles('**/go.sum') }}
@@ -43,5 +45,11 @@ jobs:
         run: git --no-pager diff --exit-code
 
       - name: Test
-        run: NETBIRD_STORE_ENGINE=${{ matrix.store }} CI=true go test -tags=devcert -exec 'sudo --preserve-env=CI,NETBIRD_STORE_ENGINE' -timeout 5m -p 1 $(go list ./... | grep -v -e /management -e /signal -e /relay -e /proxy -e /combined)
+        run: NETBIRD_STORE_ENGINE=${{ matrix.store }} CI=true go test -coverprofile=coverage.txt -tags=devcert -exec 'sudo --preserve-env=CI,NETBIRD_STORE_ENGINE' -timeout 5m -p 1 $(go list ./... | grep -v -e /management -e /signal -e /relay -e /proxy -e /combined)
 
+      - name: Upload coverage reports to Codecov
+        uses: codecov/codecov-action@e79a6962e0d4c0c17b229090214935d2e33f8354 #v6.0.1
+        with:
+          token: ${{ secrets.CODECOV_TOKEN }}
+          slug: netbirdio/netbird
+          flags: unit,client

.github/workflows/golang-test-freebsd.yml

@@ -15,20 +15,31 @@ jobs:
     name: "Client / Unit"
     runs-on: ubuntu-22.04
     steps:
-      - uses: actions/checkout@v4
+      - name: Checkout code
+        uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
+        with:
+          persist-credentials: false
+
+      - name: Read Go version from go.mod
+        id: goversion
+        run: echo "version=$(awk '/^go / {print $2}' go.mod)" >> "$GITHUB_OUTPUT"
+
       - name: Test in FreeBSD
         id: test
-        uses: vmactions/freebsd-vm@v1
+        env:
+          GO_VERSION: ${{ steps.goversion.outputs.version }}
+        uses: vmactions/freebsd-vm@d1e65811565151536c0c894fff74f06351ed26e6 # v1.4.5
         with:
           usesh: true
           copyback: false
-          release: "14.2"
+          release: "15.0"
+          envs: "GO_VERSION"
           prepare: |
             pkg install -y curl pkgconf xorg
-            GO_TARBALL="go1.25.3.freebsd-amd64.tar.gz"
+            GO_TARBALL="go${GO_VERSION}.freebsd-amd64.tar.gz"
             GO_URL="https://go.dev/dl/$GO_TARBALL"
             curl -vLO "$GO_URL"
-            tar -C /usr/local -vxzf "$GO_TARBALL"            
+            tar -C /usr/local -vxzf "$GO_TARBALL"
 
           # -x - to print all executed commands
           # -e - to faile on first error

.github/workflows/golang-test-linux.yml

@@ -18,9 +18,11 @@ jobs:
       management: ${{ steps.filter.outputs.management }}
     steps:
       - name: Checkout code
-        uses: actions/checkout@v4
+        uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
+        with:
+          persist-credentials: false
 
-      - uses: dorny/paths-filter@v3
+      - uses: dorny/paths-filter@fbd0ab8f3e69293af611ebaee6363fc25e6d187d # v4.0.1
         id: filter
         with:
           filters: |
@@ -28,7 +30,7 @@ jobs:
               - 'management/**'
 
       - name: Install Go
-        uses: actions/setup-go@v5
+        uses: actions/setup-go@4b73464bb391d4059bd26b0524d20df3927bd417 # v6.3.0
         with:
           go-version-file: "go.mod"
           cache: false
@@ -36,10 +38,10 @@ jobs:
       - name: Get Go environment
         run: |
           echo "cache=$(go env GOCACHE)" >> $GITHUB_ENV
-          echo "modcache=$(go env GOMODCACHE)" >> $GITHUB_ENV     
+          echo "modcache=$(go env GOMODCACHE)" >> $GITHUB_ENV
 
       - name: Cache Go modules
-        uses: actions/cache@v4
+        uses: actions/cache@27d5ce7f107fe9357f9df03efb73ab90386fccae # v5.0.5
         id: cache
         with:
           path: |
@@ -113,14 +115,16 @@ jobs:
     strategy:
       fail-fast: false
       matrix:
-        arch: [ '386','amd64' ]
+        arch: ["386", "amd64"]
     runs-on: ubuntu-22.04
     steps:
       - name: Checkout code
-        uses: actions/checkout@v4
+        uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
+        with:
+          persist-credentials: false
 
       - name: Install Go
-        uses: actions/setup-go@v5
+        uses: actions/setup-go@4b73464bb391d4059bd26b0524d20df3927bd417 # v6.3.0
         with:
           go-version-file: "go.mod"
           cache: false
@@ -128,10 +132,10 @@ jobs:
       - name: Get Go environment
         run: |
           echo "cache=$(go env GOCACHE)" >> $GITHUB_ENV
-          echo "modcache=$(go env GOMODCACHE)" >> $GITHUB_ENV     
+          echo "modcache=$(go env GOMODCACHE)" >> $GITHUB_ENV
 
       - name: Cache Go modules
-        uses: actions/cache/restore@v4
+        uses: actions/cache/restore@27d5ce7f107fe9357f9df03efb73ab90386fccae # v5.0.5
         with:
           path: |
             ${{ env.cache }}
@@ -154,18 +158,29 @@ jobs:
         run: git --no-pager diff --exit-code
 
       - name: Test
-        run: CGO_ENABLED=1 GOARCH=${{ matrix.arch }} CI=true go test -tags devcert -exec 'sudo' -timeout 10m -p 1 $(go list ./... | grep -v -e /management -e /signal -e /relay -e /proxy -e /combined)
+        run: CGO_ENABLED=1 GOARCH=${{ matrix.arch }} CI=true go test -coverprofile=coverage.txt -tags devcert -exec 'sudo' -timeout 10m -p 1 $(go list ./... | grep -v -e /management -e /signal -e /relay -e /proxy -e /combined)
+
+      - name: Upload coverage reports to Codecov
+        if: matrix.arch == 'amd64'
+        uses: codecov/codecov-action@e79a6962e0d4c0c17b229090214935d2e33f8354 #v6.0.1
+        with:
+          token: ${{ secrets.CODECOV_TOKEN }}
+          slug: netbirdio/netbird
+          flags: unit,client
+
 
   test_client_on_docker:
     name: "Client (Docker) / Unit"
-    needs: [ build-cache ]
+    needs: [build-cache]
     runs-on: ubuntu-22.04
     steps:
       - name: Checkout code
-        uses: actions/checkout@v4
+        uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
+        with:
+          persist-credentials: false
 
       - name: Install Go
-        uses: actions/setup-go@v5
+        uses: actions/setup-go@4b73464bb391d4059bd26b0524d20df3927bd417 # v6.3.0
         with:
           go-version-file: "go.mod"
           cache: false
@@ -177,7 +192,7 @@ jobs:
           echo "modcache_dir=$(go env GOMODCACHE)" >> $GITHUB_OUTPUT
 
       - name: Cache Go modules
-        uses: actions/cache/restore@v4
+        uses: actions/cache/restore@27d5ce7f107fe9357f9df03efb73ab90386fccae # v5.0.5
         id: cache-restore
         with:
           path: |
@@ -231,10 +246,12 @@ jobs:
     runs-on: ubuntu-22.04
     steps:
       - name: Checkout code
-        uses: actions/checkout@v4
+        uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
+        with:
+          persist-credentials: false
 
       - name: Install Go
-        uses: actions/setup-go@v5
+        uses: actions/setup-go@4b73464bb391d4059bd26b0524d20df3927bd417 # v6.3.0
         with:
           go-version-file: "go.mod"
           cache: false
@@ -246,10 +263,10 @@ jobs:
       - name: Get Go environment
         run: |
           echo "cache=$(go env GOCACHE)" >> $GITHUB_ENV
-          echo "modcache=$(go env GOMODCACHE)" >> $GITHUB_ENV     
+          echo "modcache=$(go env GOMODCACHE)" >> $GITHUB_ENV
 
       - name: Cache Go modules
-        uses: actions/cache/restore@v4
+        uses: actions/cache/restore@27d5ce7f107fe9357f9df03efb73ab90386fccae # v5.0.5
         with:
           path: |
             ${{ env.cache }}
@@ -268,23 +285,33 @@ jobs:
         run: |
           CGO_ENABLED=1 GOARCH=${{ matrix.arch }} \
           go test ${{ matrix.raceFlag }} \
-            -exec 'sudo' \
+            -exec 'sudo' -coverprofile=coverage.txt \
             -timeout 10m -p 1 ./relay/... ./shared/relay/...
 
+      - name: Upload coverage reports to Codecov
+        if: matrix.arch == 'amd64'
+        uses: codecov/codecov-action@e79a6962e0d4c0c17b229090214935d2e33f8354 #v6.0.1
+        with:
+          token: ${{ secrets.CODECOV_TOKEN }}
+          slug: netbirdio/netbird
+          flags: unit,relay
+
   test_proxy:
     name: "Proxy / Unit"
     needs: [build-cache]
     strategy:
       fail-fast: false
       matrix:
-        arch: [ '386','amd64' ]
+        arch: ["386", "amd64"]
     runs-on: ubuntu-22.04
     steps:
       - name: Checkout code
-        uses: actions/checkout@v4
+        uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
+        with:
+          persist-credentials: false
 
       - name: Install Go
-        uses: actions/setup-go@v5
+        uses: actions/setup-go@4b73464bb391d4059bd26b0524d20df3927bd417 # v6.3.0
         with:
           go-version-file: "go.mod"
           cache: false
@@ -298,7 +325,7 @@ jobs:
           echo "modcache=$(go env GOMODCACHE)" >> $GITHUB_ENV
 
       - name: Cache Go modules
-        uses: actions/cache/restore@v4
+        uses: actions/cache/restore@27d5ce7f107fe9357f9df03efb73ab90386fccae # v5.0.5
         with:
           path: |
             ${{ env.cache }}
@@ -316,7 +343,15 @@ jobs:
       - name: Test
         run: |
           CGO_ENABLED=1 GOARCH=${{ matrix.arch }} \
-          go test -timeout 10m -p 1 ./proxy/...
+          go test -timeout 10m -p 1 -coverprofile=coverage.txt ./proxy/...
+
+      - name: Upload coverage reports to Codecov
+        if: matrix.arch == 'amd64'
+        uses: codecov/codecov-action@e79a6962e0d4c0c17b229090214935d2e33f8354 #v6.0.1
+        with:
+          token: ${{ secrets.CODECOV_TOKEN }}
+          slug: netbirdio/netbird
+          flags: unit,proxy
 
   test_signal:
     name: "Signal / Unit"
@@ -324,14 +359,16 @@ jobs:
     strategy:
       fail-fast: false
       matrix:
-        arch: [ '386','amd64' ]
+        arch: ["386", "amd64"]
     runs-on: ubuntu-22.04
     steps:
       - name: Checkout code
-        uses: actions/checkout@v4
+        uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
+        with:
+          persist-credentials: false
 
       - name: Install Go
-        uses: actions/setup-go@v5
+        uses: actions/setup-go@4b73464bb391d4059bd26b0524d20df3927bd417 # v6.3.0
         with:
           go-version-file: "go.mod"
           cache: false
@@ -343,10 +380,10 @@ jobs:
       - name: Get Go environment
         run: |
           echo "cache=$(go env GOCACHE)" >> $GITHUB_ENV
-          echo "modcache=$(go env GOMODCACHE)" >> $GITHUB_ENV     
+          echo "modcache=$(go env GOMODCACHE)" >> $GITHUB_ENV
 
       - name: Cache Go modules
-        uses: actions/cache/restore@v4
+        uses: actions/cache/restore@27d5ce7f107fe9357f9df03efb73ab90386fccae # v5.0.5
         with:
           path: |
             ${{ env.cache }}
@@ -365,24 +402,34 @@ jobs:
         run: |
           CGO_ENABLED=1 GOARCH=${{ matrix.arch }} \
           go test \
-            -exec 'sudo' \
+            -exec 'sudo' -coverprofile=coverage.txt \
             -timeout 10m ./signal/... ./shared/signal/...
 
+      - name: Upload coverage reports to Codecov
+        if: matrix.arch == 'amd64'
+        uses: codecov/codecov-action@e79a6962e0d4c0c17b229090214935d2e33f8354 #v6.0.1
+        with:
+          token: ${{ secrets.CODECOV_TOKEN }}
+          slug: netbirdio/netbird
+          flags: unit,signal
+
   test_management:
     name: "Management / Unit"
-    needs: [ build-cache ]
+    needs: [build-cache]
     strategy:
       fail-fast: false
       matrix:
-        arch: [ 'amd64' ]
-        store: [ 'sqlite', 'postgres', 'mysql' ]
+        arch: ["amd64"]
+        store: ["sqlite", "postgres", "mysql"]
     runs-on: ubuntu-22.04
     steps:
       - name: Checkout code
-        uses: actions/checkout@v4
+        uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
+        with:
+          persist-credentials: false
 
       - name: Install Go
-        uses: actions/setup-go@v5
+        uses: actions/setup-go@4b73464bb391d4059bd26b0524d20df3927bd417 # v6.3.0
         with:
           go-version-file: "go.mod"
           cache: false
@@ -390,10 +437,10 @@ jobs:
       - name: Get Go environment
         run: |
           echo "cache=$(go env GOCACHE)" >> $GITHUB_ENV
-          echo "modcache=$(go env GOMODCACHE)" >> $GITHUB_ENV     
+          echo "modcache=$(go env GOMODCACHE)" >> $GITHUB_ENV
 
       - name: Cache Go modules
-        uses: actions/cache/restore@v4
+        uses: actions/cache/restore@27d5ce7f107fe9357f9df03efb73ab90386fccae # v5.0.5
         with:
           path: |
             ${{ env.cache }}
@@ -410,7 +457,7 @@ jobs:
 
       - name: Login to Docker hub
         if: github.event.pull_request && github.event.pull_request.head.repo && github.event.pull_request.head.repo.full_name == '' || github.repository == github.event.pull_request.head.repo.full_name || !github.head_ref
-        uses: docker/login-action@v3
+        uses: docker/login-action@650006c6eb7dba73a995cc03b0b2d7f5ca915bee # v4.2.0
         with:
           username: ${{ secrets.DOCKER_USER }}
           password: ${{ secrets.DOCKER_TOKEN }}
@@ -427,23 +474,31 @@ jobs:
         run: docker pull mlsmaycon/warmed-mysql:8
 
       - name: Test
-        run: |          
+        run: |
           CGO_ENABLED=1 GOARCH=${{ matrix.arch }} \
           NETBIRD_STORE_ENGINE=${{ matrix.store }} \
             CI=true \
-          go test -tags=devcert \
+          go test -tags=devcert -coverprofile=coverage.txt \
             -exec "sudo --preserve-env=CI,NETBIRD_STORE_ENGINE" \
             -timeout 20m ./management/... ./shared/management/...
 
+      - name: Upload coverage reports to Codecov
+        if: matrix.arch == 'amd64'
+        uses: codecov/codecov-action@e79a6962e0d4c0c17b229090214935d2e33f8354 #v6.0.1
+        with:
+          token: ${{ secrets.CODECOV_TOKEN }}
+          slug: netbirdio/netbird
+          flags: unit,management
+
   benchmark:
     name: "Management / Benchmark"
-    needs: [ build-cache ]
+    needs: [build-cache]
     if: ${{ needs.build-cache.outputs.management == 'true' || github.event_name != 'pull_request' }}
     strategy:
       fail-fast: false
       matrix:
-        arch: [ 'amd64' ]
-        store: [ 'sqlite', 'postgres' ]
+        arch: ["amd64"]
+        store: ["sqlite", "postgres"]
     runs-on: ubuntu-22.04
     steps:
       - name: Create Docker network
@@ -474,10 +529,12 @@ jobs:
             prom/prometheus
 
       - name: Checkout code
-        uses: actions/checkout@v4
+        uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
+        with:
+          persist-credentials: false
 
       - name: Install Go
-        uses: actions/setup-go@v5
+        uses: actions/setup-go@4b73464bb391d4059bd26b0524d20df3927bd417 # v6.3.0
         with:
           go-version-file: "go.mod"
           cache: false
@@ -485,10 +542,10 @@ jobs:
       - name: Get Go environment
         run: |
           echo "cache=$(go env GOCACHE)" >> $GITHUB_ENV
-          echo "modcache=$(go env GOMODCACHE)" >> $GITHUB_ENV     
+          echo "modcache=$(go env GOMODCACHE)" >> $GITHUB_ENV
 
       - name: Cache Go modules
-        uses: actions/cache/restore@v4
+        uses: actions/cache/restore@27d5ce7f107fe9357f9df03efb73ab90386fccae # v5.0.5
         with:
           path: |
             ${{ env.cache }}
@@ -505,7 +562,7 @@ jobs:
 
       - name: Login to Docker hub
         if: github.event.pull_request && github.event.pull_request.head.repo && github.event.pull_request.head.repo.full_name == '' || github.repository == github.event.pull_request.head.repo.full_name || !github.head_ref
-        uses: docker/login-action@v3
+        uses: docker/login-action@650006c6eb7dba73a995cc03b0b2d7f5ca915bee # v4.2.0
         with:
           username: ${{ secrets.DOCKER_USER }}
           password: ${{ secrets.DOCKER_TOKEN }}
@@ -529,13 +586,13 @@ jobs:
 
   api_benchmark:
     name: "Management / Benchmark (API)"
-    needs: [ build-cache ]
+    needs: [build-cache]
     if: ${{ needs.build-cache.outputs.management == 'true' || github.event_name != 'pull_request' }}
     strategy:
       fail-fast: false
       matrix:
-        arch: [ 'amd64' ]
-        store: [ 'sqlite', 'postgres' ]
+        arch: ["amd64"]
+        store: ["sqlite", "postgres"]
     runs-on: ubuntu-22.04
     steps:
       - name: Create Docker network
@@ -566,10 +623,12 @@ jobs:
             prom/prometheus
 
       - name: Checkout code
-        uses: actions/checkout@v4
+        uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
+        with:
+          persist-credentials: false
 
       - name: Install Go
-        uses: actions/setup-go@v5
+        uses: actions/setup-go@4b73464bb391d4059bd26b0524d20df3927bd417 # v6.3.0
         with:
           go-version-file: "go.mod"
           cache: false
@@ -577,10 +636,10 @@ jobs:
       - name: Get Go environment
         run: |
           echo "cache=$(go env GOCACHE)" >> $GITHUB_ENV
-          echo "modcache=$(go env GOMODCACHE)" >> $GITHUB_ENV     
+          echo "modcache=$(go env GOMODCACHE)" >> $GITHUB_ENV
 
       - name: Cache Go modules
-        uses: actions/cache/restore@v4
+        uses: actions/cache/restore@27d5ce7f107fe9357f9df03efb73ab90386fccae # v5.0.5
         with:
           path: |
             ${{ env.cache }}
@@ -597,7 +656,7 @@ jobs:
 
       - name: Login to Docker hub
         if: github.event.pull_request && github.event.pull_request.head.repo && github.event.pull_request.head.repo.full_name == '' || github.repository == github.event.pull_request.head.repo.full_name || !github.head_ref
-        uses: docker/login-action@v3
+        uses: docker/login-action@650006c6eb7dba73a995cc03b0b2d7f5ca915bee # v4.2.0
         with:
           username: ${{ secrets.DOCKER_USER }}
           password: ${{ secrets.DOCKER_TOKEN }}
@@ -623,20 +682,22 @@ jobs:
 
   api_integration_test:
     name: "Management / Integration"
-    needs: [ build-cache ]
+    needs: [build-cache]
     if: ${{ needs.build-cache.outputs.management == 'true' || github.event_name != 'pull_request' }}
     strategy:
       fail-fast: false
       matrix:
-        arch: [ 'amd64' ]
-        store: [ 'sqlite', 'postgres']
+        arch: ["amd64"]
+        store: ["sqlite", "postgres"]
     runs-on: ubuntu-22.04
     steps:
       - name: Checkout code
-        uses: actions/checkout@v4
+        uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
+        with:
+          persist-credentials: false
 
       - name: Install Go
-        uses: actions/setup-go@v5
+        uses: actions/setup-go@4b73464bb391d4059bd26b0524d20df3927bd417 # v6.3.0
         with:
           go-version-file: "go.mod"
           cache: false
@@ -644,10 +705,10 @@ jobs:
       - name: Get Go environment
         run: |
           echo "cache=$(go env GOCACHE)" >> $GITHUB_ENV
-          echo "modcache=$(go env GOMODCACHE)" >> $GITHUB_ENV     
+          echo "modcache=$(go env GOMODCACHE)" >> $GITHUB_ENV
 
       - name: Cache Go modules
-        uses: actions/cache/restore@v4
+        uses: actions/cache/restore@27d5ce7f107fe9357f9df03efb73ab90386fccae # v5.0.5
         with:
           path: |
             ${{ env.cache }}
@@ -667,6 +728,14 @@ jobs:
           CGO_ENABLED=1 GOARCH=${{ matrix.arch }} \
           NETBIRD_STORE_ENGINE=${{ matrix.store }} \
           CI=true \
-          go test -tags=integration \
+          go test -tags=integration -coverprofile=coverage.txt \
           -exec 'sudo --preserve-env=CI,NETBIRD_STORE_ENGINE' \
           -timeout 20m ./management/server/http/...
+
+      - name: Upload coverage reports to Codecov
+        if: matrix.arch == 'amd64'
+        uses: codecov/codecov-action@e79a6962e0d4c0c17b229090214935d2e33f8354 #v6.0.1
+        with:
+          token: ${{ secrets.CODECOV_TOKEN }}
+          slug: netbirdio/netbird
+          flags: integration,management

.github/workflows/golang-test-windows.yml

@@ -18,10 +18,12 @@ jobs:
     runs-on: windows-latest
     steps:
       - name: Checkout code
-        uses: actions/checkout@v4
+        uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
+        with:
+          persist-credentials: false
 
       - name: Install Go
-        uses: actions/setup-go@v5
+        uses: actions/setup-go@4b73464bb391d4059bd26b0524d20df3927bd417 # v6.3.0
         id: go
         with:
           go-version-file: "go.mod"
@@ -33,7 +35,7 @@ jobs:
           echo "modcache=$(go env GOMODCACHE)" >> $env:GITHUB_ENV
 
       - name: Cache Go modules
-        uses: actions/cache@v4
+        uses: actions/cache@27d5ce7f107fe9357f9df03efb73ab90386fccae # v5.0.5
         with:
           path: |
             ${{ env.cache }}
@@ -44,16 +46,15 @@ jobs:
             ${{ runner.os }}-go-
 
       - name: Download wintun
-        uses: carlosperate/download-file-action@v2
         id: download-wintun
+        uses: netbirdio/shared-actions/actions/win-download-and-verify@be5df6047383da2236e02243cceb857d8567c27e # v0.0.2
         with:
-          file-url: https://pkgs.netbird.io/wintun/wintun-0.14.1.zip
-          file-name: wintun.zip
-          location: ${{ env.downloadPath }}
-          sha256: '07c256185d6ee3652e09fa55c0b673e2624b565e02c4b9091c79ca7d2f24ef51'
+          url: https://pkgs.netbird.io/wintun/wintun-0.14.1.zip
+          destination: ${{ env.downloadPath }}\wintun.zip
+          sha256: 07c256185d6ee3652e09fa55c0b673e2624b565e02c4b9091c79ca7d2f24ef51
 
       - name: Decompressing wintun files
-        run: tar -zvxf "${{ steps.download-wintun.outputs.file-path }}" -C ${{ env.downloadPath }}
+        run: tar -xvf "${{ steps.download-wintun.outputs.file-path }}" -C ${{ env.downloadPath }}
 
       - run: mv ${{ env.downloadPath }}/wintun/bin/amd64/wintun.dll 'C:\Windows\System32\'
 

.github/workflows/golangci-lint.yml

@@ -15,9 +15,11 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - name: Checkout code
-        uses: actions/checkout@v4
+        uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
+        with:
+          persist-credentials: false
       - name: codespell
-        uses: codespell-project/actions-codespell@v2
+        uses: codespell-project/actions-codespell@8f01853be192eb0f849a5c7d721450e7a467c579 # v2.2
         with:
           ignore_words_list: erro,clienta,hastable,iif,groupd,testin,groupe,cros,ans,deriver,te,userA,ede,additionals
           skip: go.mod,go.sum,**/proxy/web/**
@@ -38,13 +40,15 @@ jobs:
     timeout-minutes: 15
     steps:
       - name: Checkout code
-        uses: actions/checkout@v4
+        uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
+        with:
+          persist-credentials: false
       - name: Check for duplicate constants
         if: matrix.os == 'ubuntu-latest'
         run: |
           ! awk '/const \(/,/)/{print $0}' management/server/activity/codes.go | grep -o '= [0-9]*' | sort | uniq -d | grep .
       - name: Install Go
-        uses: actions/setup-go@v5
+        uses: actions/setup-go@4b73464bb391d4059bd26b0524d20df3927bd417 # v6.3.0
         with:
           go-version-file: "go.mod"
           cache: false
@@ -52,7 +56,7 @@ jobs:
         if: matrix.os == 'ubuntu-latest'
         run: sudo apt update && sudo apt install -y -q libgtk-3-dev libayatana-appindicator3-dev libgl1-mesa-dev xorg-dev libpcap-dev
       - name: golangci-lint
-        uses: golangci/golangci-lint-action@4afd733a84b1f43292c63897423277bb7f4313a9 # v8.0.0
+        uses: golangci/golangci-lint-action@82606bf257cbaff209d206a39f5134f0cfbfd2ee #v9.2.1
         with:
           version: latest
           skip-cache: true

.github/workflows/install-script-test.yml

@@ -22,7 +22,9 @@ jobs:
     runs-on: ${{ matrix.os }}
     steps:
       - name: Checkout code
-        uses: actions/checkout@v4
+        uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
+        with:
+          persist-credentials: false
 
       - name: run install script
         env:

.github/workflows/mobile-build-validation.yml

@@ -16,23 +16,25 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - name: Checkout repository
-        uses: actions/checkout@v4
+        uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
+        with:
+          persist-credentials: false
       - name: Install Go
-        uses: actions/setup-go@v5
+        uses: actions/setup-go@4b73464bb391d4059bd26b0524d20df3927bd417 # v6.3.0
         with:
           go-version-file: "go.mod"
       - name: Setup Android SDK
-        uses: android-actions/setup-android@v3
+        uses: android-actions/setup-android@40fd30fb8d7440372e1316f5d1809ec01dcd3699 # v4.0.1
         with:
           cmdline-tools-version: 8512546
       - name: Setup Java
-        uses: actions/setup-java@v4
+        uses: actions/setup-java@be666c2fcd27ec809703dec50e508c2fdc7f6654
         with:
           java-version: "11"
           distribution: "adopt"
       - name: NDK Cache
         id: ndk-cache
-        uses: actions/cache@v4
+        uses: actions/cache@27d5ce7f107fe9357f9df03efb73ab90386fccae # v5.0.5
         with:
           path: /usr/local/lib/android/sdk/ndk
           key: ndk-cache-23.1.7779620
@@ -52,9 +54,11 @@ jobs:
     runs-on: macos-latest
     steps:
       - name: Checkout repository
-        uses: actions/checkout@v4
+        uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
+        with:
+          persist-credentials: false
       - name: Install Go
-        uses: actions/setup-go@v5
+        uses: actions/setup-go@4b73464bb391d4059bd26b0524d20df3927bd417 # v6.3.0
         with:
           go-version-file: "go.mod"
       - name: install gomobile

.github/workflows/pr-title-check.yml

@@ -9,7 +9,7 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - name: Validate PR title prefix
-        uses: actions/github-script@v7
+        uses: actions/github-script@3a2844b7e9c422d3c10d287c895573f7108da1b3 # v9.0.0
         with:
           script: |
             const title = context.payload.pull_request.title;

.github/workflows/proto-version-check.yml

@@ -10,7 +10,7 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - name: Check for proto tool version changes
-        uses: actions/github-script@v7
+        uses: actions/github-script@3a2844b7e9c422d3c10d287c895573f7108da1b3 # v9.0.0
         with:
           script: |
             const files = await github.paginate(github.rest.pulls.listFiles, {
@@ -20,34 +20,83 @@ jobs:
               per_page: 100,
             });
 
-            const pbFiles = files.filter(f => f.filename.endsWith('.pb.go'));
-            const missingPatch = pbFiles.filter(f => !f.patch).map(f => f.filename);
-            if (missingPatch.length > 0) {
-              core.setFailed(
-                `Cannot inspect patch data for:\n` +
-                missingPatch.map(f => `- ${f}`).join('\n') +
-                `\nThis can happen with very large PRs. Verify proto versions manually.`
-              );
+            // Cover renamed .pb.go files in addition to plain edits.
+            // Renamed entries land under the new path with previous_filename
+            // pointing at the base-side name, so we read the base content
+            // from the old path when present.
+            const changedPbFiles = files
+              .filter(f => (f.status === 'modified' || f.status === 'renamed')
+                && f.filename.endsWith('.pb.go'))
+              .map(f => ({
+                headPath: f.filename,
+                basePath: f.previous_filename || f.filename,
+              }));
+            if (changedPbFiles.length === 0) {
+              console.log('No modified or renamed .pb.go files to check');
               return;
             }
-            const versionPattern = /^[+-]\s*\/\/\s+protoc(?:-gen-go)?\s+v[\d.]+/;
-            const violations = [];
 
-            for (const file of pbFiles) {
-              const changed = file.patch
-                .split('\n')
-                .filter(line => versionPattern.test(line));
-              if (changed.length > 0) {
+            // Matches the generator version headers protoc writes at the top
+            // of generated files:
+            //   //   protoc           v3.21.12
+            //   //   protoc-gen-go    v1.26.0
+            //   // - protoc-gen-go-grpc v1.6.1   (grpc files prefix with "- ")
+            // The optional "- " prefix and the optional -gen-go / -gen-go-grpc
+            // suffixes keep the *_grpc.pb.go headers in scope.
+            const versionPattern = /^\s*\/\/\s+(?:-\s+)?protoc(?:-gen-go(?:-grpc)?)?\s+v[\d.]+/;
+            const baseSha = context.payload.pull_request.base.sha;
+            const headSha = context.payload.pull_request.head.sha;
+
+            async function getVersionHeader(path, ref) {
+              try {
+                const res = await github.rest.repos.getContent({
+                  owner: context.repo.owner,
+                  repo: context.repo.repo,
+                  path,
+                  ref,
+                });
+                if (!res.data.content) {
+                  return { ok: false, reason: 'no inline content (file too large)' };
+                }
+                const content = Buffer.from(res.data.content, 'base64').toString('utf8');
+                const lines = content
+                  .split('\n')
+                  .slice(0, 20)
+                  .filter(line => versionPattern.test(line));
+                return { ok: true, lines };
+              } catch (e) {
+                return { ok: false, reason: e.message };
+              }
+            }
+
+            const violations = [];
+            for (const file of changedPbFiles) {
+              const [base, head] = await Promise.all([
+                getVersionHeader(file.basePath, baseSha),
+                getVersionHeader(file.headPath, headSha),
+              ]);
+              if (!base.ok || !head.ok) {
+                core.warning(
+                  `Skipping ${file.headPath}: base=${base.ok ? 'ok' : base.reason}, head=${head.ok ? 'ok' : head.reason}`
+                );
+                continue;
+              }
+              if (base.lines.join('\n') !== head.lines.join('\n')) {
                 violations.push({
-                  file: file.filename,
-                  lines: changed,
+                  file: file.basePath === file.headPath
+                    ? file.headPath
+                    : `${file.basePath} → ${file.headPath}`,
+                  base: base.lines,
+                  head: head.lines,
                 });
               }
             }
 
             if (violations.length > 0) {
               const details = violations.map(v =>
-                `${v.file}:\n${v.lines.map(l => '  ' + l).join('\n')}`
+                `${v.file}:\n` +
+                `  base:\n${v.base.map(l => '    ' + l).join('\n') || '    (none)'}\n` +
+                `  head:\n${v.head.map(l => '    ' + l).join('\n') || '    (none)'}`
               ).join('\n\n');
 
               core.setFailed(

.github/workflows/release.yml

@@ -9,10 +9,13 @@ on:
   pull_request:
 
 env:
-  SIGN_PIPE_VER: "v0.1.4"
-  GORELEASER_VER: "v2.14.3"
+  SIGN_PIPE_VER: "v0.1.6"
+  GORELEASER_VER: "v2.16.0"
   PRODUCT_NAME: "NetBird"
   COPYRIGHT: "NetBird GmbH"
+  flags: ""
+  SKIP_PUBLISH: "true"
+  SKIP_DOCKER_PUSH: "false"
 
 concurrency:
   group: ${{ github.workflow }}-${{ github.ref }}-${{ github.head_ref || github.actor_id }}
@@ -24,13 +27,15 @@ jobs:
     runs-on: ubuntu-22.04
     steps:
       - name: Checkout
-        uses: actions/checkout@v4
+        uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
+        with:
+          persist-credentials: false
 
       - name: Generate FreeBSD port diff
-        run: bash release_files/freebsd-port-diff.sh
+        run: bash -x release_files/freebsd-port-diff.sh
 
       - name: Generate FreeBSD port issue body
-        run: bash release_files/freebsd-port-issue-body.sh
+        run: bash -x release_files/freebsd-port-issue-body.sh
 
       - name: Check if diff was generated
         id: check_diff
@@ -51,19 +56,26 @@ jobs:
           echo "Generated files for version: $VERSION"
           cat netbird-*.diff
 
+      - name: Read Go version from go.mod
+        id: goversion
+        run: echo "version=$(awk '/^go / {print $2}' go.mod)" >> "$GITHUB_OUTPUT"
+
       - name: Test FreeBSD port
         if: steps.check_diff.outputs.diff_exists == 'true'
-        uses: vmactions/freebsd-vm@v1
+        env:
+          GO_VERSION: ${{ steps.goversion.outputs.version }}
+        uses: vmactions/freebsd-vm@d1e65811565151536c0c894fff74f06351ed26e6 # v1.4.5
         with:
           usesh: true
           copyback: false
           release: "15.0"
+          envs: "GO_VERSION"
           prepare: |
             # Install required packages
-            pkg install -y git curl portlint go
+            pkg install -y git curl portlint
 
             # Install Go for building
-            GO_TARBALL="go1.25.5.freebsd-amd64.tar.gz"
+            GO_TARBALL="go${GO_VERSION}.freebsd-amd64.tar.gz"
             GO_URL="https://go.dev/dl/$GO_TARBALL"
             curl -LO "$GO_URL"
             tar -C /usr/local -xzf "$GO_TARBALL"
@@ -93,19 +105,19 @@ jobs:
 
             # Show patched Makefile
             version=$(cat security/netbird/Makefile | grep -E '^DISTVERSION=' | awk '{print $NF}')
-            
+
             cd /usr/ports/security/netbird
             export BATCH=yes
             make package
             pkg add ./work/pkg/netbird-*.pkg
-            
+
             netbird version | grep "$version"
 
             echo "FreeBSD port test completed successfully!"
 
       - name: Upload FreeBSD port files
         if: steps.check_diff.outputs.diff_exists == 'true'
-        uses: actions/upload-artifact@v4
+        uses: actions/upload-artifact@043fb46d1a93c77aae656e7c1c64a875d1fc6a0a #v7.0.1
         with:
           name: freebsd-port-files
           path: |
@@ -121,29 +133,45 @@ jobs:
       windows_packages_artifact_url: ${{ steps.upload_windows_packages.outputs.artifact-url }}
       macos_packages_artifact_url: ${{ steps.upload_macos_packages.outputs.artifact-url }}
       ghcr_images: ${{ steps.tag_and_push_images.outputs.images_markdown }}
-    env:
-      flags: ""
     steps:
-      - name: Parse semver string
-        id: semver_parser
-        uses: booxmedialtd/ws-action-parse-semver@v1
-        with:
-          input_string: ${{ (startsWith(github.ref, 'refs/tags/v') && github.ref) || 'refs/tags/v0.0.0' }}
-          version_extractor_regex: '\/v(.*)$'
-
-      - if: ${{ !startsWith(github.ref, 'refs/tags/v') }}
-        run: echo "flags=--snapshot" >> $GITHUB_ENV
       - name: Checkout
-        uses: actions/checkout@v4
+        uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
         with:
           fetch-depth: 0 # It is required for GoReleaser to work properly
+          persist-credentials: false
+
+      - name: Parse semver string
+        id: semver_parser
+        uses: netbirdio/shared-actions/actions/parse-semver@be5df6047383da2236e02243cceb857d8567c27e # v0.0.2
+
+      - name: Set snapshot flag
+        if: ${{ !startsWith(github.ref, 'refs/tags/v') }}
+        run: | 
+          echo "flags=--snapshot" >> $GITHUB_ENV
+
+      - name: Set build vars
+        if: ${{ startsWith(github.ref, 'refs/tags/v') }}
+        run: |
+          if [[ "x-${{ steps.semver_parser.outputs.prerelease }}" == "x-" && "x-${{ github.repository }}" == "x-netbirdio/netbird" ]]; then
+            echo "x-${{ github.repository }}" 
+            echo "x-${{ steps.semver_parser.outputs.prerelease }}"
+            echo "SKIP_PUBLISH=false" >> $GITHUB_ENV
+          else
+            echo "x-${{ github.repository }}" 
+            echo "x-${{ steps.semver_parser.outputs.prerelease }}"
+          fi
+          
+          if [[ "x-${{ github.repository }}" != "x-netbirdio/netbird" ]]; then
+            echo "SKIP_DOCKER_PUSH=true" >> $GITHUB_ENV
+          fi
+
       - name: Set up Go
-        uses: actions/setup-go@v5
+        uses: actions/setup-go@4b73464bb391d4059bd26b0524d20df3927bd417 # v6.3.0
         with:
           go-version-file: "go.mod"
           cache: false
       - name: Cache Go modules
-        uses: actions/cache@v4
+        uses: actions/cache/restore@27d5ce7f107fe9357f9df03efb73ab90386fccae # v5.0.5
         with:
           path: |
             ~/go/pkg/mod
@@ -153,21 +181,23 @@ jobs:
             ${{ runner.os }}-go-releaser-
       - name: Install modules
         run: go mod tidy
+      - name: run openapi generator
+        run: bash shared/management/http/api/generate.sh
       - name: check git status
         run: git --no-pager diff --exit-code
       - name: Set up QEMU
-        uses: docker/setup-qemu-action@v2
+        uses: docker/setup-qemu-action@ce360397dd3f832beb865e1373c09c0e9f86d70a #v4.0.0
       - name: Set up Docker Buildx
-        uses: docker/setup-buildx-action@v2
+        uses: docker/setup-buildx-action@4d04d5d9486b7bd6fa91e7baf45bbb4f8b9deedd #v4.0.0
       - name: Login to Docker hub
         if: github.event_name != 'pull_request'
-        uses: docker/login-action@v1
+        uses: docker/login-action@650006c6eb7dba73a995cc03b0b2d7f5ca915bee # v4.2.0
         with:
           username: ${{ secrets.DOCKER_USER }}
           password: ${{ secrets.DOCKER_TOKEN }}
       - name: Log in to the GitHub container registry
         if: github.event_name != 'pull_request' || github.event.pull_request.head.repo.full_name == github.repository
-        uses: docker/login-action@v3
+        uses: docker/login-action@650006c6eb7dba73a995cc03b0b2d7f5ca915bee # v4.2.0
         with:
           registry: ghcr.io
           username: ${{ github.actor }}
@@ -191,7 +221,7 @@ jobs:
         run: goversioninfo -arm -64 -icon client/ui/assets/netbird.ico -manifest client/manifest.xml -product-name ${{ env.PRODUCT_NAME }} -copyright "${{ env.COPYRIGHT }}" -ver-major ${{ steps.semver_parser.outputs.major }} -ver-minor ${{ steps.semver_parser.outputs.minor }} -ver-patch ${{ steps.semver_parser.outputs.patch }} -ver-build 0 -file-version ${{ steps.semver_parser.outputs.fullversion }}.0 -product-version ${{ steps.semver_parser.outputs.fullversion }}.0 -o client/resources_windows_arm64.syso
       - name: Run GoReleaser
         id: goreleaser
-        uses: goreleaser/goreleaser-action@v4
+        uses: goreleaser/goreleaser-action@4c6ab561adb47e50c45ef534e2155934e91c40c1 # v7.2.0
         with:
           version: ${{ env.GORELEASER_VER }}
           args: release --clean ${{ env.flags }}
@@ -202,6 +232,8 @@ jobs:
           UPLOAD_YUM_SECRET: ${{ secrets.PKG_UPLOAD_SECRET }}
           GPG_RPM_KEY_FILE: ${{ env.GPG_RPM_KEY_FILE }}
           NFPM_NETBIRD_RPM_PASSPHRASE: ${{ secrets.GPG_RPM_PASSPHRASE }}
+          SKIP_PUBLISH: ${{ env.SKIP_PUBLISH }}
+          SKIP_DOCKER_PUSH: ${{ env.SKIP_DOCKER_PUSH }}
       - name: Verify RPM signatures
         run: |
           docker run --rm -v $(pwd)/dist:/dist fedora:41 bash -c '
@@ -282,28 +314,28 @@ jobs:
           } >> "$GITHUB_OUTPUT"
       - name: upload non tags for debug purposes
         id: upload_release
-        uses: actions/upload-artifact@v4
+        uses: actions/upload-artifact@043fb46d1a93c77aae656e7c1c64a875d1fc6a0a #v7.0.1
         with:
           name: release
           path: dist/
           retention-days: 7
       - name: upload linux packages
         id: upload_linux_packages
-        uses: actions/upload-artifact@v4
+        uses: actions/upload-artifact@043fb46d1a93c77aae656e7c1c64a875d1fc6a0a #v7.0.1
         with:
           name: linux-packages
           path: dist/netbird_linux**
           retention-days: 7
       - name: upload windows packages
         id: upload_windows_packages
-        uses: actions/upload-artifact@v4
+        uses: actions/upload-artifact@043fb46d1a93c77aae656e7c1c64a875d1fc6a0a #v7.0.1
         with:
           name: windows-packages
           path: dist/netbird_windows**
           retention-days: 7
       - name: upload macos packages
         id: upload_macos_packages
-        uses: actions/upload-artifact@v4
+        uses: actions/upload-artifact@043fb46d1a93c77aae656e7c1c64a875d1fc6a0a #v7.0.1
         with:
           name: macos-packages
           path: dist/netbird_darwin**
@@ -314,27 +346,40 @@ jobs:
     outputs:
       release_ui_artifact_url: ${{ steps.upload_release_ui.outputs.artifact-url }}
     steps:
-      - name: Parse semver string
-        id: semver_parser
-        uses: booxmedialtd/ws-action-parse-semver@v1
-        with:
-          input_string: ${{ (startsWith(github.ref, 'refs/tags/v') && github.ref) || 'refs/tags/v0.0.0' }}
-          version_extractor_regex: '\/v(.*)$'
-
-      - if: ${{ !startsWith(github.ref, 'refs/tags/v') }}
-        run: echo "flags=--snapshot" >> $GITHUB_ENV
       - name: Checkout
-        uses: actions/checkout@v4
+        uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
         with:
           fetch-depth: 0 # It is required for GoReleaser to work properly
+          persist-credentials: false
+
+      - name: Parse semver string
+        id: semver_parser
+        uses: netbirdio/shared-actions/actions/parse-semver@be5df6047383da2236e02243cceb857d8567c27e # v0.0.2
+
+      - name: Set snapshot flag
+        if: ${{ !startsWith(github.ref, 'refs/tags/v') }}
+        run: |
+          echo "flags=--snapshot" >> $GITHUB_ENV
+
+      - name: Set build vars
+        if: ${{ startsWith(github.ref, 'refs/tags/v') }}
+        run: |
+          if [[ "x-${{ steps.semver_parser.outputs.prerelease }}" == "x-" && "x-${{ github.repository }}" == "x-netbirdio/netbird" ]]; then
+            echo "x-${{ github.repository }}" 
+            echo "x-${{ steps.semver_parser.outputs.prerelease }}"
+            echo "SKIP_PUBLISH=false" >> $GITHUB_ENV
+          else
+            echo "x-${{ github.repository }}" 
+            echo "x-${{ steps.semver_parser.outputs.prerelease }}"
+          fi
 
       - name: Set up Go
-        uses: actions/setup-go@v5
+        uses: actions/setup-go@4b73464bb391d4059bd26b0524d20df3927bd417 # v6.3.0
         with:
           go-version-file: "go.mod"
           cache: false
       - name: Cache Go modules
-        uses: actions/cache@v4
+        uses: actions/cache@27d5ce7f107fe9357f9df03efb73ab90386fccae # v5.0.5
         with:
           path: |
             ~/go/pkg/mod
@@ -375,7 +420,7 @@ jobs:
         run: goversioninfo -arm -64 -icon client/ui/assets/netbird.ico -manifest client/ui/manifest.xml -product-name ${{ env.PRODUCT_NAME }}-"UI" -copyright "${{ env.COPYRIGHT }}" -ver-major ${{ steps.semver_parser.outputs.major }} -ver-minor ${{ steps.semver_parser.outputs.minor }} -ver-patch ${{ steps.semver_parser.outputs.patch }} -ver-build 0 -file-version ${{ steps.semver_parser.outputs.fullversion }}.0 -product-version ${{ steps.semver_parser.outputs.fullversion }}.0 -o client/ui/resources_windows_arm64.syso
 
       - name: Run GoReleaser
-        uses: goreleaser/goreleaser-action@v4
+        uses: goreleaser/goreleaser-action@4c6ab561adb47e50c45ef534e2155934e91c40c1 # v7.2.0
         with:
           version: ${{ env.GORELEASER_VER }}
           args: release --config .goreleaser_ui.yaml --clean ${{ env.flags }}
@@ -386,6 +431,7 @@ jobs:
           UPLOAD_YUM_SECRET: ${{ secrets.PKG_UPLOAD_SECRET }}
           GPG_RPM_KEY_FILE: ${{ env.GPG_RPM_KEY_FILE }}
           NFPM_NETBIRD_UI_RPM_PASSPHRASE: ${{ secrets.GPG_RPM_PASSPHRASE }}
+          SKIP_PUBLISH: ${{ env.SKIP_PUBLISH }}
       - name: Verify RPM signatures
         run: |
           docker run --rm -v $(pwd)/dist:/dist fedora:41 bash -c '
@@ -404,7 +450,7 @@ jobs:
         run: rm -f /tmp/gpg-rpm-signing-key.asc
       - name: upload non tags for debug purposes
         id: upload_release_ui
-        uses: actions/upload-artifact@v4
+        uses: actions/upload-artifact@043fb46d1a93c77aae656e7c1c64a875d1fc6a0a #v7.0.1
         with:
           name: release-ui
           path: dist/
@@ -418,16 +464,17 @@ jobs:
       - if: ${{ !startsWith(github.ref, 'refs/tags/v') }}
         run: echo "flags=--snapshot" >> $GITHUB_ENV
       - name: Checkout
-        uses: actions/checkout@v4
+        uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
         with:
           fetch-depth: 0 # It is required for GoReleaser to work properly
+          persist-credentials: false
       - name: Set up Go
-        uses: actions/setup-go@v5
+        uses: actions/setup-go@4b73464bb391d4059bd26b0524d20df3927bd417 # v6.3.0
         with:
           go-version-file: "go.mod"
           cache: false
       - name: Cache Go modules
-        uses: actions/cache@v4
+        uses: actions/cache@27d5ce7f107fe9357f9df03efb73ab90386fccae # v5.0.5
         with:
           path: |
             ~/go/pkg/mod
@@ -441,7 +488,7 @@ jobs:
         run: git --no-pager diff --exit-code
       - name: Run GoReleaser
         id: goreleaser
-        uses: goreleaser/goreleaser-action@v4
+        uses: goreleaser/goreleaser-action@4c6ab561adb47e50c45ef534e2155934e91c40c1 # v7.2.0
         with:
           version: ${{ env.GORELEASER_VER }}
           args: release --config .goreleaser_ui_darwin.yaml --clean ${{ env.flags }}
@@ -449,7 +496,7 @@ jobs:
           GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
       - name: upload non tags for debug purposes
         id: upload_release_ui_darwin
-        uses: actions/upload-artifact@v4
+        uses: actions/upload-artifact@043fb46d1a93c77aae656e7c1c64a875d1fc6a0a #v7.0.1
         with:
           name: release-ui-darwin
           path: dist/
@@ -474,27 +521,26 @@ jobs:
       PackageWorkdir: netbird_windows_${{ matrix.arch }}
       downloadPath: '${{ github.workspace }}\temp'
     steps:
+      - name: Checkout
+        uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
+        with:
+          persist-credentials: false
+
       - name: Parse semver string
         id: semver_parser
-        uses: booxmedialtd/ws-action-parse-semver@v1
-        with:
-          input_string: ${{ (startsWith(github.ref, 'refs/tags/v') && github.ref) || 'refs/tags/v0.0.0' }}
-          version_extractor_regex: '\/v(.*)$'
-
-      - name: Checkout
-        uses: actions/checkout@v4
+        uses: netbirdio/shared-actions/actions/parse-semver@be5df6047383da2236e02243cceb857d8567c27e # v0.0.2
 
       - name: Add 7-Zip to PATH
         run: echo "C:\Program Files\7-Zip" | Out-File -FilePath $env:GITHUB_PATH -Encoding utf8 -Append
 
       - name: Download release artifacts
-        uses: actions/download-artifact@v4
+        uses: actions/download-artifact@70fc10c6e5e1ce46ad2ea6f2b72d43f7d47b13c3 # v8.0.1
         with:
           name: release
           path: release
 
       - name: Download UI release artifacts
-        uses: actions/download-artifact@v4
+        uses: actions/download-artifact@70fc10c6e5e1ce46ad2ea6f2b72d43f7d47b13c3 # v8.0.1
         with:
           name: release-ui
           path: release-ui
@@ -514,29 +560,27 @@ jobs:
           Get-ChildItem $workdir
 
       - name: Download wintun
-        uses: carlosperate/download-file-action@v2
         id: download-wintun
+        uses: netbirdio/shared-actions/actions/win-download-and-verify@be5df6047383da2236e02243cceb857d8567c27e # v0.0.2
         with:
-          file-url: https://pkgs.netbird.io/wintun/wintun-0.14.1.zip
-          file-name: wintun.zip
-          location: ${{ env.downloadPath }}
-          sha256: '07c256185d6ee3652e09fa55c0b673e2624b565e02c4b9091c79ca7d2f24ef51'
+          url: https://pkgs.netbird.io/wintun/wintun-0.14.1.zip
+          destination: ${{ env.downloadPath }}\wintun.zip
+          sha256: 07c256185d6ee3652e09fa55c0b673e2624b565e02c4b9091c79ca7d2f24ef51
 
       - name: Decompress wintun files
-        run: tar -zvxf "${{ steps.download-wintun.outputs.file-path }}" -C ${{ env.downloadPath }}
+        run: tar -xvf "${{ env.downloadPath }}\wintun.zip" -C ${{ env.downloadPath }}
 
       - name: Move wintun.dll into dist
         run: mv ${{ env.downloadPath }}\wintun\bin\${{ matrix.wintun_arch }}\wintun.dll ${{ github.workspace }}\dist\${{ env.PackageWorkdir }}\
 
       - name: Download Mesa3D (amd64 only)
-        uses: carlosperate/download-file-action@v2
         id: download-mesa3d
         if: matrix.arch == 'amd64'
+        uses: netbirdio/shared-actions/actions/win-download-and-verify@be5df6047383da2236e02243cceb857d8567c27e # v0.0.2
         with:
-          file-url: https://downloads.fdossena.com/Projects/Mesa3D/Builds/MesaForWindows-x64-20.1.8.7z
-          file-name: mesa3d.7z
-          location: ${{ env.downloadPath }}
-          sha256: '71c7cb64ec229a1d6b8d62fa08e1889ed2bd17c0eeede8689daf0f25cb31d6b9'
+          url: https://pkgs.netbird.io/mesa3d/MesaForWindows-x64-20.1.8.7z
+          destination: ${{ env.downloadPath }}\mesa3d.7z
+          sha256: 71c7cb64ec229a1d6b8d62fa08e1889ed2bd17c0eeede8689daf0f25cb31d6b9
 
       - name: Extract Mesa3D driver (amd64 only)
         if: matrix.arch == 'amd64'
@@ -547,35 +591,38 @@ jobs:
         run: mv ${{ env.downloadPath }}\opengl32.dll ${{ github.workspace }}\dist\${{ env.PackageWorkdir }}\
 
       - name: Download EnVar plugin for NSIS
-        uses: carlosperate/download-file-action@v2
+        uses: netbirdio/shared-actions/actions/win-download-and-verify@be5df6047383da2236e02243cceb857d8567c27e # v0.0.2
         with:
-          file-url: https://nsis.sourceforge.io/mediawiki/images/7/7f/EnVar_plugin.zip
-          file-name: envar_plugin.zip
-          location: ${{ github.workspace }}
+          url: https://pkgs.netbird.io/nsis/EnVar_plugin.zip
+          destination: ${{ github.workspace }}\envar_plugin.zip
+          sha256: e9aa92de351345ed82795251d838f1ae9041ba35af9d381a5780c7843b01f56a
 
       - name: Extract EnVar plugin
         run: 7z x -o"${{ github.workspace }}/NSIS_Plugins" "${{ github.workspace }}/envar_plugin.zip"
 
       - name: Download ShellExecAsUser plugin for NSIS (amd64 only)
-        uses: carlosperate/download-file-action@v2
         if: matrix.arch == 'amd64'
+        uses: netbirdio/shared-actions/actions/win-download-and-verify@be5df6047383da2236e02243cceb857d8567c27e # v0.0.2
         with:
-          file-url: https://nsis.sourceforge.io/mediawiki/images/6/68/ShellExecAsUser_amd64-Unicode.7z
-          file-name: ShellExecAsUser_amd64-Unicode.7z
-          location: ${{ github.workspace }}
+          url: https://pkgs.netbird.io/nsis/ShellExecAsUser_amd64-Unicode.7z
+          destination: ${{ github.workspace }}\ShellExecAsUser_amd64-Unicode.7z
+          sha256: 0a55ea25c7330a92cec028eda8afcaf1b1a7092e0dfb77c21c8f654564b4ff9d
 
       - name: Extract ShellExecAsUser plugin (amd64 only)
         if: matrix.arch == 'amd64'
         run: 7z x -o"${{ github.workspace }}/NSIS_Plugins" "${{ github.workspace }}/ShellExecAsUser_amd64-Unicode.7z"
 
       - name: Build NSIS installer
-        uses: joncloud/makensis-action@v3.3
-        with:
-          additional-plugin-paths: ${{ github.workspace }}/NSIS_Plugins/Plugins
-          script-file: client/installer.nsis
-          arguments: "/V4 /DARCH=${{ matrix.arch }}"
+        shell: pwsh
         env:
           APPVER: ${{ steps.semver_parser.outputs.major }}.${{ steps.semver_parser.outputs.minor }}.${{ steps.semver_parser.outputs.patch }}.${{ github.run_id }}
+        run: |
+          $nsisPluginDir = "C:\Program Files (x86)\NSIS\Plugins\x86-unicode"
+          $srcPlugins    = "${{ github.workspace }}\NSIS_Plugins\Plugins"
+          Get-ChildItem -Path $srcPlugins -Recurse -Filter *.dll |
+            Copy-Item -Destination $nsisPluginDir -Force
+          & "C:\Program Files (x86)\NSIS\makensis.exe" /V4 "/DARCH=${{ matrix.arch }}" client\installer.nsis
+          if ($LASTEXITCODE -ne 0) { throw "makensis failed with exit code $LASTEXITCODE" }
 
       - name: Rename NSIS installer
         run: mv netbird-installer.exe netbird_installer_test_windows_${{ matrix.arch }}.exe
@@ -592,7 +639,7 @@ jobs:
 
       - name: Upload installer artifacts
         if: always()
-        uses: actions/upload-artifact@v4
+        uses: actions/upload-artifact@043fb46d1a93c77aae656e7c1c64a875d1fc6a0a #v7.0.1
         with:
           name: windows-installer-test-${{ matrix.arch }}
           path: |
@@ -611,7 +658,7 @@ jobs:
       pull-requests: write
     steps:
       - name: Create or update PR comment
-        uses: actions/github-script@v7
+        uses: actions/github-script@3a2844b7e9c422d3c10d287c895573f7108da1b3 # v9.0.0
         env:
           RELEASE_RESULT: ${{ needs.release.result }}
           RELEASE_UI_RESULT: ${{ needs.release_ui.result }}
@@ -703,7 +750,7 @@ jobs:
     if: startsWith(github.ref, 'refs/tags/')
     steps:
       - name: Trigger binaries sign pipelines
-        uses: benc-uk/workflow-dispatch@v1
+        uses: benc-uk/workflow-dispatch@31e2b3319479a63f0ab15bf800eff9e913504e26 # v1.3.2
         with:
           workflow: Sign bin and installer
           repo: netbirdio/sign-pipelines

.github/workflows/sync-main.yml

@@ -14,9 +14,9 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - name: Trigger main branch sync
-        uses: benc-uk/workflow-dispatch@v1
+        uses: benc-uk/workflow-dispatch@31e2b3319479a63f0ab15bf800eff9e913504e26 # v1.3.2
         with:
           workflow: sync-main.yml
           repo: ${{ secrets.UPSTREAM_REPO }}
           token: ${{ secrets.NC_GITHUB_TOKEN }}
-          inputs: '{ "sha": "${{ github.sha }}" }'
+          inputs: '{ "sha": "${{ github.sha }}" }'

.github/workflows/sync-tag.yml

@@ -3,7 +3,7 @@ name: sync tag
 on:
   push:
     tags:
-      - 'v*'
+      - "v*"
 
 concurrency:
   group: ${{ github.workflow }}-${{ github.ref }}-${{ github.head_ref || github.actor_id }}
@@ -16,7 +16,7 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - name: Trigger release tag sync
-        uses: benc-uk/workflow-dispatch@v1
+        uses: benc-uk/workflow-dispatch@31e2b3319479a63f0ab15bf800eff9e913504e26 # v1.3.2
         with:
           workflow: sync-tag.yml
           ref: main
@@ -29,7 +29,7 @@ jobs:
     if: github.event.created && !github.event.deleted && startsWith(github.ref, 'refs/tags/v') && !contains(github.ref_name, '-')
     steps:
       - name: Trigger android-client submodule bump
-        uses: benc-uk/workflow-dispatch@7a027648b88c2413826b6ddd6c76114894dc5ec4 # v1.3.1
+        uses: benc-uk/workflow-dispatch@31e2b3319479a63f0ab15bf800eff9e913504e26 # v1.3.2
         with:
           workflow: bump-netbird.yml
           ref: main
@@ -42,10 +42,10 @@ jobs:
     if: github.event.created && !github.event.deleted && startsWith(github.ref, 'refs/tags/v') && !contains(github.ref_name, '-')
     steps:
       - name: Trigger ios-client submodule bump
-        uses: benc-uk/workflow-dispatch@7a027648b88c2413826b6ddd6c76114894dc5ec4 # v1.3.1
+        uses: benc-uk/workflow-dispatch@31e2b3319479a63f0ab15bf800eff9e913504e26 # v1.3.2
         with:
           workflow: bump-netbird.yml
           ref: main
           repo: netbirdio/ios-client
           token: ${{ secrets.NC_GITHUB_TOKEN }}
-          inputs: '{ "tag": "${{ github.ref_name }}" }'
+          inputs: '{ "tag": "${{ github.ref_name }}" }'

.github/workflows/test-infrastructure-files.yml

@@ -6,10 +6,10 @@ on:
       - main
   pull_request:
     paths:
-      - 'infrastructure_files/**'
-      - '.github/workflows/test-infrastructure-files.yml'
-      - 'management/cmd/**'
-      - 'signal/cmd/**'
+      - "infrastructure_files/**"
+      - ".github/workflows/test-infrastructure-files.yml"
+      - "management/cmd/**"
+      - "signal/cmd/**"
 
 concurrency:
   group: ${{ github.workflow }}-${{ github.ref }}-${{ github.head_ref || github.actor_id }}
@@ -20,7 +20,7 @@ jobs:
     runs-on: ubuntu-latest
     strategy:
       matrix:
-        store: [ 'sqlite', 'postgres', 'mysql' ]
+        store: ["sqlite", "postgres", "mysql"]
     services:
       postgres:
         image: ${{ (matrix.store == 'postgres') && 'postgres' || '' }}
@@ -68,15 +68,17 @@ jobs:
         run: sudo apt-get install -y curl
 
       - name: Checkout code
-        uses: actions/checkout@v4
+        uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
+        with:
+          persist-credentials: false
 
       - name: Install Go
-        uses: actions/setup-go@v5
+        uses: actions/setup-go@4b73464bb391d4059bd26b0524d20df3927bd417 # v6.3.0
         with:
           go-version-file: "go.mod"
 
       - name: Cache Go modules
-        uses: actions/cache@v4
+        uses: actions/cache@27d5ce7f107fe9357f9df03efb73ab90386fccae # v5.0.5
         with:
           path: ~/go/pkg/mod
           key: ${{ runner.os }}-go-${{ hashFiles('**/go.sum') }}
@@ -139,8 +141,8 @@ jobs:
           CI_NETBIRD_IDP_MGMT_CLIENT_SECRET: testing.client.secret
           CI_NETBIRD_SIGNAL_PORT: 12345
           CI_NETBIRD_STORE_CONFIG_ENGINE: ${{ matrix.store }}
-          NETBIRD_STORE_ENGINE_POSTGRES_DSN: '${{ env.NETBIRD_STORE_ENGINE_POSTGRES_DSN }}$'
-          NETBIRD_STORE_ENGINE_MYSQL_DSN: '${{ env.NETBIRD_STORE_ENGINE_MYSQL_DSN }}$'
+          NETBIRD_STORE_ENGINE_POSTGRES_DSN: "${{ env.NETBIRD_STORE_ENGINE_POSTGRES_DSN }}$"
+          NETBIRD_STORE_ENGINE_MYSQL_DSN: "${{ env.NETBIRD_STORE_ENGINE_MYSQL_DSN }}$"
           CI_NETBIRD_MGMT_IDP_SIGNKEY_REFRESH: false
           CI_NETBIRD_TURN_EXTERNAL_IP: "1.2.3.4"
           CI_NETBIRD_MGMT_DISABLE_DEFAULT_POLICY: false
@@ -254,7 +256,9 @@ jobs:
         run: sudo apt-get install -y jq
 
       - name: Checkout code
-        uses: actions/checkout@v4
+        uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
+        with:
+          persist-credentials: false
 
       - name: run script with Zitadel PostgreSQL
         run: NETBIRD_DOMAIN=use-ip bash -x infrastructure_files/getting-started-with-zitadel.sh

.github/workflows/update-docs.yml

@@ -3,9 +3,9 @@ name: update docs
 on:
   push:
     tags:
-      - 'v*'
+      - "v*"
     paths:
-      - 'shared/management/http/api/openapi.yml'
+      - "shared/management/http/api/openapi.yml"
 
 jobs:
   trigger_docs_api_update:
@@ -13,10 +13,10 @@ jobs:
     if: startsWith(github.ref, 'refs/tags/')
     steps:
       - name: Trigger API pages generation
-        uses: benc-uk/workflow-dispatch@v1
+        uses: benc-uk/workflow-dispatch@31e2b3319479a63f0ab15bf800eff9e913504e26 # v1.3.2
         with:
           workflow: generate api pages
           repo: netbirdio/docs
           ref: "refs/heads/main"
           token: ${{ secrets.SIGN_GITHUB_TOKEN }}
-          inputs: '{ "tag": "${{ github.ref }}" }'
+          inputs: '{ "tag": "${{ github.ref }}" }'

.github/workflows/wasm-build-validation.yml

@@ -19,15 +19,17 @@ jobs:
       GOARCH: wasm
     steps:
       - name: Checkout repository
-        uses: actions/checkout@v4
+        uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
+        with:
+          persist-credentials: false
       - name: Install Go
-        uses: actions/setup-go@v5
+        uses: actions/setup-go@4b73464bb391d4059bd26b0524d20df3927bd417 # v6.3.0
         with:
           go-version-file: "go.mod"
       - name: Install dependencies
         run: sudo apt update && sudo apt install -y -q libgtk-3-dev libayatana-appindicator3-dev libgl1-mesa-dev xorg-dev libpcap-dev
       - name: Install golangci-lint
-        uses: golangci/golangci-lint-action@4afd733a84b1f43292c63897423277bb7f4313a9 # v8.0.0
+        uses: golangci/golangci-lint-action@82606bf257cbaff209d206a39f5134f0cfbfd2ee #v9.2.1
         with:
           version: latest
           install-mode: binary
@@ -42,9 +44,11 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - name: Checkout repository
-        uses: actions/checkout@v4
+        uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
+        with:
+          persist-credentials: false
       - name: Install Go
-        uses: actions/setup-go@v5
+        uses: actions/setup-go@4b73464bb391d4059bd26b0524d20df3927bd417 # v6.3.0
         with:
           go-version-file: "go.mod"
       - name: Build Wasm client
@@ -61,8 +65,7 @@ jobs:
 
           echo "Size: ${SIZE} bytes (${SIZE_MB} MB)"
 
-          if [ ${SIZE} -gt 58720256 ]; then
-            echo "Wasm binary size (${SIZE_MB}MB) exceeds 56MB limit!"
+          if [ ${SIZE} -gt 62914560 ]; then
+            echo "Wasm binary size (${SIZE_MB}MB) exceeds 60MB limit!"
             exit 1
           fi
-

.golangci.yaml

@@ -92,9 +92,6 @@ linters:
       - linters:
           - unused
         path: client/firewall/iptables/rule\.go
-      - linters:
-          - unused
-        path: client/internal/dns/dnsfw/(types|syscall|zsyscall)_windows.*\.go
       - linters:
           - gosec
           - mirror

.goreleaser.yaml

@@ -1,5 +1,7 @@
 version: 2
-
+env:
+  - SKIP_PUBLISH={{ if index .Env "SKIP_PUBLISH" }}{{ .Env.SKIP_PUBLISH }}{{ else }}true{{ end }}
+  - SKIP_DOCKER_PUSH={{ if index .Env "SKIP_DOCKER_PUSH" }}{{ .Env.SKIP_DOCKER_PUSH }}{{ else }}false{{ end }}
 project_name: netbird
 builds:
   - id: netbird-wasm
@@ -74,6 +76,8 @@ builds:
       - amd64
       - arm64
       - arm
+    goarm:
+      - 7
     ldflags:
       - -s -w -X github.com/netbirdio/netbird/version.version={{.Version}} -X main.commit={{.Commit}} -X main.date={{.CommitDate}} -X main.builtBy=goreleaser
     mod_timestamp: "{{ .CommitTimestamp }}"
@@ -88,6 +92,8 @@ builds:
       - amd64
       - arm64
       - arm
+    goarm:
+      - 7
     ldflags:
       - -s -w -X github.com/netbirdio/netbird/version.version={{.Version}} -X main.commit={{.Commit}} -X main.date={{.CommitDate}} -X main.builtBy=goreleaser
     mod_timestamp: "{{ .CommitTimestamp }}"
@@ -102,6 +108,8 @@ builds:
       - amd64
       - arm64
       - arm
+    goarm:
+      - 7
     ldflags:
       - -s -w -X github.com/netbirdio/netbird/version.version={{.Version}} -X main.commit={{.Commit}} -X main.date={{.CommitDate}} -X main.builtBy=goreleaser
     mod_timestamp: "{{ .CommitTimestamp }}"
@@ -122,6 +130,8 @@ builds:
       - amd64
       - arm64
       - arm
+    goarm:
+      - 7
     ldflags:
       - -s -w -X github.com/netbirdio/netbird/version.version={{.Version}} -X main.commit={{.Commit}} -X main.date={{.CommitDate}} -X main.builtBy=goreleaser
     mod_timestamp: "{{ .CommitTimestamp }}"
@@ -136,6 +146,8 @@ builds:
       - amd64
       - arm64
       - arm
+    goarm:
+      - 7
     ldflags:
       - -s -w -X github.com/netbirdio/netbird/version.version={{.Version}} -X main.commit={{.Commit}} -X main.date={{.CommitDate}} -X main.builtBy=goreleaser
     mod_timestamp: "{{ .CommitTimestamp }}"
@@ -150,6 +162,8 @@ builds:
       - amd64
       - arm64
       - arm
+    goarm:
+      - 7
     ldflags:
       - -s -w -X main.Version={{.Version}} -X main.Commit={{.Commit}} -X main.BuildDate={{.CommitDate}}
     mod_timestamp: "{{ .CommitTimestamp }}"
@@ -170,6 +184,8 @@ builds:
       - amd64
       - arm64
       - arm
+    goarm:
+      - 7
     ldflags:
       - -s -w -X github.com/netbirdio/netbird/version.version={{.Version}} -X main.commit={{.Commit}} -X main.date={{.CommitDate}} -X main.builtBy=goreleaser
     mod_timestamp: "{{ .CommitTimestamp }}"
@@ -222,670 +238,192 @@ nfpms:
     rpm:
       signature:
         key_file: '{{ if index .Env "GPG_RPM_KEY_FILE" }}{{ .Env.GPG_RPM_KEY_FILE }}{{ end }}'
-dockers:
-  - image_templates:
-      - netbirdio/netbird:{{ .Version }}-amd64
-      - ghcr.io/netbirdio/netbird:{{ .Version }}-amd64
-    ids:
-      - netbird
-    goarch: amd64
-    use: buildx
-    dockerfile: client/Dockerfile
-    extra_files:
-      - client/netbird-entrypoint.sh
-    build_flag_templates:
-      - "--platform=linux/amd64"
-      - "--label=org.opencontainers.image.created={{.Date}}"
-      - "--label=org.opencontainers.image.title={{.ProjectName}}"
-      - "--label=org.opencontainers.image.version={{.Version}}"
-      - "--label=org.opencontainers.image.revision={{.FullCommit}}"
-      - "--label=org.opencontainers.image.source=https://github.com/netbirdio/{{.ProjectName}}"
-      - "--label=maintainer=dev@netbird.io"
-  - image_templates:
-      - netbirdio/netbird:{{ .Version }}-arm64v8
-      - ghcr.io/netbirdio/netbird:{{ .Version }}-arm64v8
-    ids:
-      - netbird
-    goarch: arm64
-    use: buildx
-    dockerfile: client/Dockerfile
-    extra_files:
-      - client/netbird-entrypoint.sh
-    build_flag_templates:
-      - "--platform=linux/arm64"
-      - "--label=org.opencontainers.image.created={{.Date}}"
-      - "--label=org.opencontainers.image.title={{.ProjectName}}"
-      - "--label=org.opencontainers.image.version={{.Version}}"
-      - "--label=org.opencontainers.image.revision={{.FullCommit}}"
-      - "--label=org.opencontainers.image.source=https://github.com/netbirdio/{{.ProjectName}}"
-      - "--label=maintainer=dev@netbird.io"
-  - image_templates:
-      - netbirdio/netbird:{{ .Version }}-arm
-      - ghcr.io/netbirdio/netbird:{{ .Version }}-arm
-    ids:
-      - netbird
-    goarch: arm
-    goarm: 6
-    use: buildx
-    dockerfile: client/Dockerfile
-    extra_files:
-      - client/netbird-entrypoint.sh
-    build_flag_templates:
-      - "--platform=linux/arm"
-      - "--label=org.opencontainers.image.created={{.Date}}"
-      - "--label=org.opencontainers.image.title={{.ProjectName}}"
-      - "--label=org.opencontainers.image.version={{.Version}}"
-      - "--label=org.opencontainers.image.revision={{.FullCommit}}"
-      - "--label=org.opencontainers.image.source=https://github.com/netbirdio/{{.ProjectName}}"
-      - "--label=maintainer=dev@netbird.io"
-
-  - image_templates:
-      - netbirdio/netbird:{{ .Version }}-rootless-amd64
-      - ghcr.io/netbirdio/netbird:{{ .Version }}-rootless-amd64
-    ids:
-      - netbird
-    goarch: amd64
-    use: buildx
-    dockerfile: client/Dockerfile-rootless
-    extra_files:
-      - client/netbird-entrypoint.sh
-    build_flag_templates:
-      - "--platform=linux/amd64"
-      - "--label=org.opencontainers.image.created={{.Date}}"
-      - "--label=org.opencontainers.image.title={{.ProjectName}}"
-      - "--label=org.opencontainers.image.version={{.Version}}"
-      - "--label=org.opencontainers.image.revision={{.FullCommit}}"
-      - "--label=org.opencontainers.image.source=https://github.com/netbirdio/{{.ProjectName}}"
-      - "--label=maintainer=dev@netbird.io"
-  - image_templates:
-      - netbirdio/netbird:{{ .Version }}-rootless-arm64v8
-      - ghcr.io/netbirdio/netbird:{{ .Version }}-rootless-arm64v8
-    ids:
-      - netbird
-    goarch: arm64
-    use: buildx
-    dockerfile: client/Dockerfile-rootless
-    extra_files:
-      - client/netbird-entrypoint.sh
-    build_flag_templates:
-      - "--platform=linux/arm64"
-      - "--label=org.opencontainers.image.created={{.Date}}"
-      - "--label=org.opencontainers.image.title={{.ProjectName}}"
-      - "--label=org.opencontainers.image.version={{.Version}}"
-      - "--label=org.opencontainers.image.revision={{.FullCommit}}"
-      - "--label=org.opencontainers.image.source=https://github.com/netbirdio/{{.ProjectName}}"
-      - "--label=maintainer=dev@netbird.io"
-  - image_templates:
-      - netbirdio/netbird:{{ .Version }}-rootless-arm
-      - ghcr.io/netbirdio/netbird:{{ .Version }}-rootless-arm
-    ids:
-      - netbird
-    goarch: arm
-    goarm: 6
-    use: buildx
-    dockerfile: client/Dockerfile-rootless
-    extra_files:
-      - client/netbird-entrypoint.sh
-    build_flag_templates:
-      - "--platform=linux/arm"
-      - "--label=org.opencontainers.image.created={{.Date}}"
-      - "--label=org.opencontainers.image.title={{.ProjectName}}"
-      - "--label=org.opencontainers.image.version={{.Version}}"
-      - "--label=org.opencontainers.image.revision={{.FullCommit}}"
-      - "--label=org.opencontainers.image.source=https://github.com/netbirdio/{{.ProjectName}}"
-      - "--label=maintainer=dev@netbird.io"
-
-  - image_templates:
-      - netbirdio/relay:{{ .Version }}-amd64
-      - ghcr.io/netbirdio/relay:{{ .Version }}-amd64
-    ids:
-      - netbird-relay
-    goarch: amd64
-    use: buildx
-    dockerfile: relay/Dockerfile
-    build_flag_templates:
-      - "--platform=linux/amd64"
-      - "--label=org.opencontainers.image.created={{.Date}}"
-      - "--label=org.opencontainers.image.title={{.ProjectName}}"
-      - "--label=org.opencontainers.image.version={{.Version}}"
-      - "--label=org.opencontainers.image.revision={{.FullCommit}}"
-      - "--label=org.opencontainers.image.source=https://github.com/netbirdio/{{.ProjectName}}"
-      - "--label=maintainer=dev@netbird.io"
-  - image_templates:
-      - netbirdio/relay:{{ .Version }}-arm64v8
-      - ghcr.io/netbirdio/relay:{{ .Version }}-arm64v8
-    ids:
-      - netbird-relay
-    goarch: arm64
-    use: buildx
-    dockerfile: relay/Dockerfile
-    build_flag_templates:
-      - "--platform=linux/arm64"
-      - "--label=org.opencontainers.image.created={{.Date}}"
-      - "--label=org.opencontainers.image.title={{.ProjectName}}"
-      - "--label=org.opencontainers.image.version={{.Version}}"
-      - "--label=org.opencontainers.image.revision={{.FullCommit}}"
-      - "--label=org.opencontainers.image.source=https://github.com/netbirdio/{{.ProjectName}}"
-      - "--label=maintainer=dev@netbird.io"
-  - image_templates:
-      - netbirdio/relay:{{ .Version }}-arm
-      - ghcr.io/netbirdio/relay:{{ .Version }}-arm
-    ids:
-      - netbird-relay
-    goarch: arm
-    goarm: 6
-    use: buildx
-    dockerfile: relay/Dockerfile
-    build_flag_templates:
-      - "--platform=linux/arm"
-      - "--label=org.opencontainers.image.created={{.Date}}"
-      - "--label=org.opencontainers.image.title={{.ProjectName}}"
-      - "--label=org.opencontainers.image.version={{.Version}}"
-      - "--label=org.opencontainers.image.revision={{.FullCommit}}"
-      - "--label=org.opencontainers.image.source=https://github.com/netbirdio/{{.ProjectName}}"
-      - "--label=maintainer=dev@netbird.io"
-  - image_templates:
-      - netbirdio/signal:{{ .Version }}-amd64
-      - ghcr.io/netbirdio/signal:{{ .Version }}-amd64
-    ids:
-      - netbird-signal
-    goarch: amd64
-    use: buildx
-    dockerfile: signal/Dockerfile
-    build_flag_templates:
-      - "--platform=linux/amd64"
-      - "--label=org.opencontainers.image.created={{.Date}}"
-      - "--label=org.opencontainers.image.title={{.ProjectName}}"
-      - "--label=org.opencontainers.image.version={{.Version}}"
-      - "--label=org.opencontainers.image.revision={{.FullCommit}}"
-      - "--label=org.opencontainers.image.source=https://github.com/netbirdio/{{.ProjectName}}"
-      - "--label=maintainer=dev@netbird.io"
-  - image_templates:
-      - netbirdio/signal:{{ .Version }}-arm64v8
-      - ghcr.io/netbirdio/signal:{{ .Version }}-arm64v8
-    ids:
-      - netbird-signal
-    goarch: arm64
-    use: buildx
-    dockerfile: signal/Dockerfile
-    build_flag_templates:
-      - "--platform=linux/arm64"
-      - "--label=org.opencontainers.image.created={{.Date}}"
-      - "--label=org.opencontainers.image.title={{.ProjectName}}"
-      - "--label=org.opencontainers.image.version={{.Version}}"
-      - "--label=org.opencontainers.image.revision={{.FullCommit}}"
-      - "--label=org.opencontainers.image.source=https://github.com/netbirdio/{{.ProjectName}}"
-      - "--label=maintainer=dev@netbird.io"
-  - image_templates:
-      - netbirdio/signal:{{ .Version }}-arm
-      - ghcr.io/netbirdio/signal:{{ .Version }}-arm
-    ids:
-      - netbird-signal
-    goarch: arm
-    goarm: 6
-    use: buildx
-    dockerfile: signal/Dockerfile
-    build_flag_templates:
-      - "--platform=linux/arm"
-      - "--label=org.opencontainers.image.created={{.Date}}"
-      - "--label=org.opencontainers.image.title={{.ProjectName}}"
-      - "--label=org.opencontainers.image.version={{.Version}}"
-      - "--label=org.opencontainers.image.revision={{.FullCommit}}"
-      - "--label=org.opencontainers.image.source=https://github.com/netbirdio/{{.ProjectName}}"
-      - "--label=maintainer=dev@netbird.io"
-  - image_templates:
-      - netbirdio/management:{{ .Version }}-amd64
-      - ghcr.io/netbirdio/management:{{ .Version }}-amd64
-    ids:
-      - netbird-mgmt
-    goarch: amd64
-    use: buildx
-    dockerfile: management/Dockerfile
-    build_flag_templates:
-      - "--platform=linux/amd64"
-      - "--label=org.opencontainers.image.created={{.Date}}"
-      - "--label=org.opencontainers.image.title={{.ProjectName}}"
-      - "--label=org.opencontainers.image.version={{.Version}}"
-      - "--label=org.opencontainers.image.revision={{.FullCommit}}"
-      - "--label=org.opencontainers.image.source=https://github.com/netbirdio/{{.ProjectName}}"
-      - "--label=maintainer=dev@netbird.io"
-  - image_templates:
-      - netbirdio/management:{{ .Version }}-arm64v8
-      - ghcr.io/netbirdio/management:{{ .Version }}-arm64v8
-    ids:
-      - netbird-mgmt
-    goarch: arm64
-    use: buildx
-    dockerfile: management/Dockerfile
-    build_flag_templates:
-      - "--platform=linux/arm64"
-      - "--label=org.opencontainers.image.created={{.Date}}"
-      - "--label=org.opencontainers.image.title={{.ProjectName}}"
-      - "--label=org.opencontainers.image.version={{.Version}}"
-      - "--label=org.opencontainers.image.revision={{.FullCommit}}"
-      - "--label=org.opencontainers.image.source=https://github.com/netbirdio/{{.ProjectName}}"
-      - "--label=maintainer=dev@netbird.io"
-  - image_templates:
-      - netbirdio/management:{{ .Version }}-arm
-      - ghcr.io/netbirdio/management:{{ .Version }}-arm
-    ids:
-      - netbird-mgmt
-    goarch: arm
-    goarm: 6
-    use: buildx
-    dockerfile: management/Dockerfile
-    build_flag_templates:
-      - "--platform=linux/arm"
-      - "--label=org.opencontainers.image.created={{.Date}}"
-      - "--label=org.opencontainers.image.title={{.ProjectName}}"
-      - "--label=org.opencontainers.image.version={{.Version}}"
-      - "--label=org.opencontainers.image.revision={{.FullCommit}}"
-      - "--label=org.opencontainers.image.source=https://github.com/netbirdio/{{.ProjectName}}"
-      - "--label=maintainer=dev@netbird.io"
-  - image_templates:
-      - netbirdio/management:{{ .Version }}-debug-amd64
-      - ghcr.io/netbirdio/management:{{ .Version }}-debug-amd64
-    ids:
-      - netbird-mgmt
-    goarch: amd64
-    use: buildx
-    dockerfile: management/Dockerfile.debug
-    build_flag_templates:
-      - "--platform=linux/amd64"
-      - "--label=org.opencontainers.image.created={{.Date}}"
-      - "--label=org.opencontainers.image.title={{.ProjectName}}"
-      - "--label=org.opencontainers.image.version={{.Version}}"
-      - "--label=org.opencontainers.image.revision={{.FullCommit}}"
-      - "--label=org.opencontainers.image.source=https://github.com/netbirdio/{{.ProjectName}}"
-      - "--label=maintainer=dev@netbird.io"
-  - image_templates:
-      - netbirdio/management:{{ .Version }}-debug-arm64v8
-      - ghcr.io/netbirdio/management:{{ .Version }}-debug-arm64v8
-    ids:
-      - netbird-mgmt
-    goarch: arm64
-    use: buildx
-    dockerfile: management/Dockerfile.debug
-    build_flag_templates:
-      - "--platform=linux/arm64"
-      - "--label=org.opencontainers.image.created={{.Date}}"
-      - "--label=org.opencontainers.image.title={{.ProjectName}}"
-      - "--label=org.opencontainers.image.version={{.Version}}"
-      - "--label=org.opencontainers.image.revision={{.FullCommit}}"
-      - "--label=org.opencontainers.image.source=https://github.com/netbirdio/{{.ProjectName}}"
-      - "--label=maintainer=dev@netbird.io"
-
-  - image_templates:
-      - netbirdio/management:{{ .Version }}-debug-arm
-      - ghcr.io/netbirdio/management:{{ .Version }}-debug-arm
-    ids:
-      - netbird-mgmt
-    goarch: arm
-    goarm: 6
-    use: buildx
-    dockerfile: management/Dockerfile.debug
-    build_flag_templates:
-      - "--platform=linux/arm"
-      - "--label=org.opencontainers.image.created={{.Date}}"
-      - "--label=org.opencontainers.image.title={{.ProjectName}}"
-      - "--label=org.opencontainers.image.version={{.Version}}"
-      - "--label=org.opencontainers.image.revision={{.FullCommit}}"
-      - "--label=org.opencontainers.image.source=https://github.com/netbirdio/{{.ProjectName}}"
-      - "--label=maintainer=dev@netbird.io"
-  - image_templates:
-      - netbirdio/upload:{{ .Version }}-amd64
-      - ghcr.io/netbirdio/upload:{{ .Version }}-amd64
-    ids:
-      - netbird-upload
-    goarch: amd64
-    use: buildx
-    dockerfile: upload-server/Dockerfile
-    build_flag_templates:
-      - "--platform=linux/amd64"
-      - "--label=org.opencontainers.image.created={{.Date}}"
-      - "--label=org.opencontainers.image.title={{.ProjectName}}"
-      - "--label=org.opencontainers.image.version={{.Version}}"
-      - "--label=org.opencontainers.image.revision={{.FullCommit}}"
-      - "--label=org.opencontainers.image.source=https://github.com/netbirdio/{{.ProjectName}}"
-      - "--label=maintainer=dev@netbird.io"
-  - image_templates:
-      - netbirdio/upload:{{ .Version }}-arm64v8
-      - ghcr.io/netbirdio/upload:{{ .Version }}-arm64v8
-    ids:
-      - netbird-upload
-    goarch: arm64
-    use: buildx
-    dockerfile: upload-server/Dockerfile
-    build_flag_templates:
-      - "--platform=linux/arm64"
-      - "--label=org.opencontainers.image.created={{.Date}}"
-      - "--label=org.opencontainers.image.title={{.ProjectName}}"
-      - "--label=org.opencontainers.image.version={{.Version}}"
-      - "--label=org.opencontainers.image.revision={{.FullCommit}}"
-      - "--label=org.opencontainers.image.source=https://github.com/netbirdio/{{.ProjectName}}"
-      - "--label=maintainer=dev@netbird.io"
-  - image_templates:
-      - netbirdio/upload:{{ .Version }}-arm
-      - ghcr.io/netbirdio/upload:{{ .Version }}-arm
-    ids:
-      - netbird-upload
-    goarch: arm
-    goarm: 6
-    use: buildx
-    dockerfile: upload-server/Dockerfile
-    build_flag_templates:
-      - "--platform=linux/arm"
-      - "--label=org.opencontainers.image.created={{.Date}}"
-      - "--label=org.opencontainers.image.title={{.ProjectName}}"
-      - "--label=org.opencontainers.image.version={{.Version}}"
-      - "--label=org.opencontainers.image.revision={{.FullCommit}}"
-      - "--label=org.opencontainers.image.source=https://github.com/netbirdio/{{.ProjectName}}"
-      - "--label=maintainer=dev@netbird.io"
-  - image_templates:
-      - netbirdio/netbird-server:{{ .Version }}-amd64
-      - ghcr.io/netbirdio/netbird-server:{{ .Version }}-amd64
-    ids:
-      - netbird-server
-    goarch: amd64
-    use: buildx
-    dockerfile: combined/Dockerfile
-    build_flag_templates:
-      - "--platform=linux/amd64"
-      - "--label=org.opencontainers.image.created={{.Date}}"
-      - "--label=org.opencontainers.image.title={{.ProjectName}}"
-      - "--label=org.opencontainers.image.version={{.Version}}"
-      - "--label=org.opencontainers.image.revision={{.FullCommit}}"
-      - "--label=org.opencontainers.image.source=https://github.com/netbirdio/{{.ProjectName}}"
-      - "--label=maintainer=dev@netbird.io"
-  - image_templates:
-      - netbirdio/netbird-server:{{ .Version }}-arm64v8
-      - ghcr.io/netbirdio/netbird-server:{{ .Version }}-arm64v8
-    ids:
-      - netbird-server
-    goarch: arm64
-    use: buildx
-    dockerfile: combined/Dockerfile
-    build_flag_templates:
-      - "--platform=linux/arm64"
-      - "--label=org.opencontainers.image.created={{.Date}}"
-      - "--label=org.opencontainers.image.title={{.ProjectName}}"
-      - "--label=org.opencontainers.image.version={{.Version}}"
-      - "--label=org.opencontainers.image.revision={{.FullCommit}}"
-      - "--label=org.opencontainers.image.source=https://github.com/netbirdio/{{.ProjectName}}"
-      - "--label=maintainer=dev@netbird.io"
-  - image_templates:
-      - netbirdio/netbird-server:{{ .Version }}-arm
-      - ghcr.io/netbirdio/netbird-server:{{ .Version }}-arm
-    ids:
-      - netbird-server
-    goarch: arm
-    goarm: 6
-    use: buildx
-    dockerfile: combined/Dockerfile
-    build_flag_templates:
-      - "--platform=linux/arm"
-      - "--label=org.opencontainers.image.created={{.Date}}"
-      - "--label=org.opencontainers.image.title={{.ProjectName}}"
-      - "--label=org.opencontainers.image.version={{.Version}}"
-      - "--label=org.opencontainers.image.revision={{.FullCommit}}"
-      - "--label=org.opencontainers.image.source=https://github.com/netbirdio/{{.ProjectName}}"
-      - "--label=maintainer=dev@netbird.io"
-  - image_templates:
-      - netbirdio/reverse-proxy:{{ .Version }}-amd64
-      - ghcr.io/netbirdio/reverse-proxy:{{ .Version }}-amd64
-    ids:
-      - netbird-proxy
-    goarch: amd64
-    use: buildx
-    dockerfile: proxy/Dockerfile
-    build_flag_templates:
-      - "--platform=linux/amd64"
-      - "--label=org.opencontainers.image.created={{.Date}}"
-      - "--label=org.opencontainers.image.title={{.ProjectName}}"
-      - "--label=org.opencontainers.image.version={{.Version}}"
-      - "--label=org.opencontainers.image.revision={{.FullCommit}}"
-      - "--label=org.opencontainers.image.source=https://github.com/netbirdio/{{.ProjectName}}"
-      - "--label=maintainer=dev@netbird.io"
-  - image_templates:
-      - netbirdio/reverse-proxy:{{ .Version }}-arm64v8
-      - ghcr.io/netbirdio/reverse-proxy:{{ .Version }}-arm64v8
-    ids:
-      - netbird-proxy
-    goarch: arm64
-    use: buildx
-    dockerfile: proxy/Dockerfile
-    build_flag_templates:
-      - "--platform=linux/arm64"
-      - "--label=org.opencontainers.image.created={{.Date}}"
-      - "--label=org.opencontainers.image.title={{.ProjectName}}"
-      - "--label=org.opencontainers.image.version={{.Version}}"
-      - "--label=org.opencontainers.image.revision={{.FullCommit}}"
-      - "--label=org.opencontainers.image.source=https://github.com/netbirdio/{{.ProjectName}}"
-      - "--label=maintainer=dev@netbird.io"
-  - image_templates:
-      - netbirdio/reverse-proxy:{{ .Version }}-arm
-      - ghcr.io/netbirdio/reverse-proxy:{{ .Version }}-arm
-    ids:
-      - netbird-proxy
-    goarch: arm
-    goarm: 6
-    use: buildx
-    dockerfile: proxy/Dockerfile
-    build_flag_templates:
-      - "--platform=linux/arm"
-      - "--label=org.opencontainers.image.created={{.Date}}"
-      - "--label=org.opencontainers.image.title={{.ProjectName}}"
-      - "--label=org.opencontainers.image.version={{.Version}}"
-      - "--label=org.opencontainers.image.revision={{.FullCommit}}"
-      - "--label=org.opencontainers.image.source=https://github.com/netbirdio/{{.ProjectName}}"
-      - "--label=maintainer=dev@netbird.io"
-docker_manifests:
-  - name_template: netbirdio/netbird:{{ .Version }}
-    image_templates:
-      - netbirdio/netbird:{{ .Version }}-arm64v8
-      - netbirdio/netbird:{{ .Version }}-arm
-      - netbirdio/netbird:{{ .Version }}-amd64
-
-  - name_template: netbirdio/netbird:latest
-    image_templates:
-      - netbirdio/netbird:{{ .Version }}-arm64v8
-      - netbirdio/netbird:{{ .Version }}-arm
-      - netbirdio/netbird:{{ .Version }}-amd64
-
-  - name_template: netbirdio/netbird:{{ .Version }}-rootless
-    image_templates:
-      - netbirdio/netbird:{{ .Version }}-rootless-arm64v8
-      - netbirdio/netbird:{{ .Version }}-rootless-arm
-      - netbirdio/netbird:{{ .Version }}-rootless-amd64
-
-  - name_template: netbirdio/netbird:rootless-latest
-    image_templates:
-      - netbirdio/netbird:{{ .Version }}-rootless-arm64v8
-      - netbirdio/netbird:{{ .Version }}-rootless-arm
-      - netbirdio/netbird:{{ .Version }}-rootless-amd64
-
-  - name_template: netbirdio/relay:{{ .Version }}
-    image_templates:
-      - netbirdio/relay:{{ .Version }}-arm64v8
-      - netbirdio/relay:{{ .Version }}-arm
-      - netbirdio/relay:{{ .Version }}-amd64
-
-  - name_template: netbirdio/relay:latest
-    image_templates:
-      - netbirdio/relay:{{ .Version }}-arm64v8
-      - netbirdio/relay:{{ .Version }}-arm
-      - netbirdio/relay:{{ .Version }}-amd64
-
-  - name_template: netbirdio/signal:{{ .Version }}
-    image_templates:
-      - netbirdio/signal:{{ .Version }}-arm64v8
-      - netbirdio/signal:{{ .Version }}-arm
-      - netbirdio/signal:{{ .Version }}-amd64
-
-  - name_template: netbirdio/signal:latest
-    image_templates:
-      - netbirdio/signal:{{ .Version }}-arm64v8
-      - netbirdio/signal:{{ .Version }}-arm
-      - netbirdio/signal:{{ .Version }}-amd64
-
-  - name_template: netbirdio/management:{{ .Version }}
-    image_templates:
-      - netbirdio/management:{{ .Version }}-arm64v8
-      - netbirdio/management:{{ .Version }}-arm
-      - netbirdio/management:{{ .Version }}-amd64
-
-  - name_template: netbirdio/management:latest
-    image_templates:
-      - netbirdio/management:{{ .Version }}-arm64v8
-      - netbirdio/management:{{ .Version }}-arm
-      - netbirdio/management:{{ .Version }}-amd64
-
-  - name_template: netbirdio/management:debug-latest
-    image_templates:
-      - netbirdio/management:{{ .Version }}-debug-arm64v8
-      - netbirdio/management:{{ .Version }}-debug-arm
-      - netbirdio/management:{{ .Version }}-debug-amd64
-  - name_template: netbirdio/upload:{{ .Version }}
-    image_templates:
-      - netbirdio/upload:{{ .Version }}-arm64v8
-      - netbirdio/upload:{{ .Version }}-arm
-      - netbirdio/upload:{{ .Version }}-amd64
-
-  - name_template: netbirdio/upload:latest
-    image_templates:
-      - netbirdio/upload:{{ .Version }}-arm64v8
-      - netbirdio/upload:{{ .Version }}-arm
-      - netbirdio/upload:{{ .Version }}-amd64
-
-  - name_template: netbirdio/netbird-server:{{ .Version }}
-    image_templates:
-      - netbirdio/netbird-server:{{ .Version }}-arm64v8
-      - netbirdio/netbird-server:{{ .Version }}-arm
-      - netbirdio/netbird-server:{{ .Version }}-amd64
-
-  - name_template: netbirdio/netbird-server:latest
-    image_templates:
-      - netbirdio/netbird-server:{{ .Version }}-arm64v8
-      - netbirdio/netbird-server:{{ .Version }}-arm
-      - netbirdio/netbird-server:{{ .Version }}-amd64
-
-  - name_template: ghcr.io/netbirdio/netbird:{{ .Version }}
-    image_templates:
-      - ghcr.io/netbirdio/netbird:{{ .Version }}-arm64v8
-      - ghcr.io/netbirdio/netbird:{{ .Version }}-arm
-      - ghcr.io/netbirdio/netbird:{{ .Version }}-amd64
-
-  - name_template: ghcr.io/netbirdio/netbird:latest
-    image_templates:
-      - ghcr.io/netbirdio/netbird:{{ .Version }}-arm64v8
-      - ghcr.io/netbirdio/netbird:{{ .Version }}-arm
-      - ghcr.io/netbirdio/netbird:{{ .Version }}-amd64
-
-  - name_template: ghcr.io/netbirdio/netbird:{{ .Version }}-rootless
-    image_templates:
-      - ghcr.io/netbirdio/netbird:{{ .Version }}-rootless-arm64v8
-      - ghcr.io/netbirdio/netbird:{{ .Version }}-rootless-arm
-      - ghcr.io/netbirdio/netbird:{{ .Version }}-rootless-amd64
-
-  - name_template: ghcr.io/netbirdio/netbird:rootless-latest
-    image_templates:
-      - ghcr.io/netbirdio/netbird:{{ .Version }}-rootless-arm64v8
-      - ghcr.io/netbirdio/netbird:{{ .Version }}-rootless-arm
-      - ghcr.io/netbirdio/netbird:{{ .Version }}-rootless-amd64
-
-  - name_template: ghcr.io/netbirdio/relay:{{ .Version }}
-    image_templates:
-      - ghcr.io/netbirdio/relay:{{ .Version }}-arm64v8
-      - ghcr.io/netbirdio/relay:{{ .Version }}-arm
-      - ghcr.io/netbirdio/relay:{{ .Version }}-amd64
-
-  - name_template: ghcr.io/netbirdio/relay:latest
-    image_templates:
-      - ghcr.io/netbirdio/relay:{{ .Version }}-arm64v8
-      - ghcr.io/netbirdio/relay:{{ .Version }}-arm
-      - ghcr.io/netbirdio/relay:{{ .Version }}-amd64
-
-  - name_template: ghcr.io/netbirdio/signal:{{ .Version }}
-    image_templates:
-      - ghcr.io/netbirdio/signal:{{ .Version }}-arm64v8
-      - ghcr.io/netbirdio/signal:{{ .Version }}-arm
-      - ghcr.io/netbirdio/signal:{{ .Version }}-amd64
-
-  - name_template: ghcr.io/netbirdio/signal:latest
-    image_templates:
-      - ghcr.io/netbirdio/signal:{{ .Version }}-arm64v8
-      - ghcr.io/netbirdio/signal:{{ .Version }}-arm
-      - ghcr.io/netbirdio/signal:{{ .Version }}-amd64
-
-  - name_template: ghcr.io/netbirdio/management:{{ .Version }}
-    image_templates:
-      - ghcr.io/netbirdio/management:{{ .Version }}-arm64v8
-      - ghcr.io/netbirdio/management:{{ .Version }}-arm
-      - ghcr.io/netbirdio/management:{{ .Version }}-amd64
-
-  - name_template: ghcr.io/netbirdio/management:latest
-    image_templates:
-      - ghcr.io/netbirdio/management:{{ .Version }}-arm64v8
-      - ghcr.io/netbirdio/management:{{ .Version }}-arm
-      - ghcr.io/netbirdio/management:{{ .Version }}-amd64
-
-  - name_template: ghcr.io/netbirdio/management:debug-latest
-    image_templates:
-      - ghcr.io/netbirdio/management:{{ .Version }}-debug-arm64v8
-      - ghcr.io/netbirdio/management:{{ .Version }}-debug-arm
-      - ghcr.io/netbirdio/management:{{ .Version }}-debug-amd64
-
-  - name_template: ghcr.io/netbirdio/upload:{{ .Version }}
-    image_templates:
-      - ghcr.io/netbirdio/upload:{{ .Version }}-arm64v8
-      - ghcr.io/netbirdio/upload:{{ .Version }}-arm
-      - ghcr.io/netbirdio/upload:{{ .Version }}-amd64
-
-  - name_template: ghcr.io/netbirdio/upload:latest
-    image_templates:
-      - ghcr.io/netbirdio/upload:{{ .Version }}-arm64v8
-      - ghcr.io/netbirdio/upload:{{ .Version }}-arm
-      - ghcr.io/netbirdio/upload:{{ .Version }}-amd64
-
-  - name_template: ghcr.io/netbirdio/netbird-server:{{ .Version }}
-    image_templates:
-      - ghcr.io/netbirdio/netbird-server:{{ .Version }}-arm64v8
-      - ghcr.io/netbirdio/netbird-server:{{ .Version }}-arm
-      - ghcr.io/netbirdio/netbird-server:{{ .Version }}-amd64
-
-  - name_template: ghcr.io/netbirdio/netbird-server:latest
-    image_templates:
-      - ghcr.io/netbirdio/netbird-server:{{ .Version }}-arm64v8
-      - ghcr.io/netbirdio/netbird-server:{{ .Version }}-arm
-      - ghcr.io/netbirdio/netbird-server:{{ .Version }}-amd64
-
-  - name_template: netbirdio/reverse-proxy:{{ .Version }}
-    image_templates:
-      - netbirdio/reverse-proxy:{{ .Version }}-arm64v8
-      - netbirdio/reverse-proxy:{{ .Version }}-arm
-      - netbirdio/reverse-proxy:{{ .Version }}-amd64
-
-  - name_template: netbirdio/reverse-proxy:latest
-    image_templates:
-      - netbirdio/reverse-proxy:{{ .Version }}-arm64v8
-      - netbirdio/reverse-proxy:{{ .Version }}-arm
-      - netbirdio/reverse-proxy:{{ .Version }}-amd64
-
-  - name_template: ghcr.io/netbirdio/reverse-proxy:{{ .Version }}
-    image_templates:
-      - ghcr.io/netbirdio/reverse-proxy:{{ .Version }}-arm64v8
-      - ghcr.io/netbirdio/reverse-proxy:{{ .Version }}-arm
-      - ghcr.io/netbirdio/reverse-proxy:{{ .Version }}-amd64
-
-  - name_template: ghcr.io/netbirdio/reverse-proxy:latest
-    image_templates:
-      - ghcr.io/netbirdio/reverse-proxy:{{ .Version }}-arm64v8
-      - ghcr.io/netbirdio/reverse-proxy:{{ .Version }}-arm
-      - ghcr.io/netbirdio/reverse-proxy:{{ .Version }}-amd64
+dockers_v2:
+   - id: netbird
+     disable: "{{ .Env.SKIP_DOCKER_PUSH }}"
+     ids:
+       - netbird
+     images:
+       - netbirdio/netbird
+       - ghcr.io/netbirdio/netbird
+     tags:
+       - "v{{ .Version }}"
+       - "{{ if eq .Env.SKIP_PUBLISH \"false\" }}latest{{ end }}"
+     dockerfile: client/Dockerfile
+     extra_files:
+       - client/netbird-entrypoint.sh
+     platforms:
+       - linux/amd64
+       - linux/arm64
+       - linux/arm/6
+     annotations:
+       "org.opencontainers.image.created": "{{.Date}}"
+       "org.opencontainers.image.title": "{{.ProjectName}}"
+       "org.opencontainers.image.version": "{{.Version}}"
+       "org.opencontainers.image.revision": "{{.FullCommit}}"
+       "org.opencontainers.image.source": "{{.GitURL}}"
+       "maintainer": "dev@netbird.io"
+   - id: netbird-rootless
+     disable: "{{ .Env.SKIP_DOCKER_PUSH }}"
+     ids:
+       - netbird
+     images:
+       - netbirdio/netbird
+       - ghcr.io/netbirdio/netbird
+     tags:
+       - "v{{ .Version }}-rootless"
+       - "{{ if eq .Env.SKIP_PUBLISH \"false\" }}latest{{ end }}"
+     dockerfile: client/Dockerfile-rootless
+     extra_files:
+       - client/netbird-entrypoint.sh
+     platforms:
+       - linux/amd64
+       - linux/arm64
+       - linux/arm/6
+     annotations:
+       "org.opencontainers.image.created": "{{.Date}}"
+       "org.opencontainers.image.title": "{{.ProjectName}}"
+       "org.opencontainers.image.version": "{{.Version}}"
+       "org.opencontainers.image.revision": "{{.FullCommit}}"
+       "org.opencontainers.image.source": "{{.GitURL}}"
+       "maintainer": "dev@netbird.io"
+   - id: relay
+     disable: "{{ .Env.SKIP_DOCKER_PUSH }}"
+     ids:
+       - netbird-relay
+     images:
+       - netbirdio/relay
+       - ghcr.io/netbirdio/relay
+     tags:
+       - "v{{ .Version }}"
+       - "{{ if eq .Env.SKIP_PUBLISH \"false\" }}latest{{ end }}"
+     dockerfile: relay/Dockerfile
+     platforms:
+       - linux/amd64
+       - linux/arm64
+       - linux/arm
+     annotations:
+       "org.opencontainers.image.created": "{{.Date}}"
+       "org.opencontainers.image.title": "{{.ProjectName}}"
+       "org.opencontainers.image.version": "{{.Version}}"
+       "org.opencontainers.image.revision": "{{.FullCommit}}"
+       "org.opencontainers.image.source": "{{.GitURL}}"
+       "maintainer": "dev@netbird.io"
+   - id: signal
+     disable: "{{ .Env.SKIP_DOCKER_PUSH }}"
+     ids:
+       - netbird-signal
+     images:
+       - netbirdio/signal
+       - ghcr.io/netbirdio/signal
+     tags:
+       - "v{{ .Version }}"
+       - "{{ if eq .Env.SKIP_PUBLISH \"false\" }}latest{{ end }}"
+     dockerfile: signal/Dockerfile
+     platforms:
+       - linux/amd64
+       - linux/arm64
+       - linux/arm
+     annotations:
+       "org.opencontainers.image.created": "{{.Date}}"
+       "org.opencontainers.image.title": "{{.ProjectName}}"
+       "org.opencontainers.image.version": "{{.Version}}"
+       "org.opencontainers.image.revision": "{{.FullCommit}}"
+       "org.opencontainers.image.source": "{{.GitURL}}"
+       "maintainer": "dev@netbird.io"
+   - id: management
+     disable: "{{ .Env.SKIP_DOCKER_PUSH }}"
+     ids:
+       - netbird-mgmt
+     images:
+       - netbirdio/management
+       - ghcr.io/netbirdio/management
+     tags:
+       - "v{{ .Version }}"
+       - "{{ if eq .Env.SKIP_PUBLISH \"false\" }}latest{{ end }}"
+     dockerfile: management/Dockerfile
+     platforms:
+       - linux/amd64
+       - linux/arm64
+       - linux/arm
+     annotations:
+       "org.opencontainers.image.created": "{{.Date}}"
+       "org.opencontainers.image.title": "{{.ProjectName}}"
+       "org.opencontainers.image.version": "{{.Version}}"
+       "org.opencontainers.image.revision": "{{.FullCommit}}"
+       "org.opencontainers.image.source": "{{.GitURL}}"
+       "maintainer": "dev@netbird.io"
+   - id: upload
+     disable: "{{ .Env.SKIP_DOCKER_PUSH }}"
+     ids:
+       - netbird-upload
+     images:
+       - netbirdio/upload
+       - ghcr.io/netbirdio/upload
+     tags:
+       - "v{{ .Version }}"
+       - "{{ if eq .Env.SKIP_PUBLISH \"false\" }}latest{{ end }}"
+     dockerfile: upload-server/Dockerfile
+     platforms:
+       - linux/amd64
+       - linux/arm64
+       - linux/arm
+     annotations:
+       "org.opencontainers.image.created": "{{.Date}}"
+       "org.opencontainers.image.title": "{{.ProjectName}}"
+       "org.opencontainers.image.version": "{{.Version}}"
+       "org.opencontainers.image.revision": "{{.FullCommit}}"
+       "org.opencontainers.image.source": "{{.GitURL}}"
+       "maintainer": "dev@netbird.io"
+   - id: netbird-server
+     disable: "{{ .Env.SKIP_DOCKER_PUSH }}"
+     ids:
+       - netbird-server
+     images:
+       - netbirdio/netbird-server
+       - ghcr.io/netbirdio/netbird-server
+     tags:
+       - "v{{ .Version }}"
+       - "{{ if eq .Env.SKIP_PUBLISH \"false\" }}latest{{ end }}"
+     dockerfile: combined/Dockerfile
+     platforms:
+       - linux/amd64
+       - linux/arm64
+       - linux/arm
+     annotations:
+       "org.opencontainers.image.created": "{{.Date}}"
+       "org.opencontainers.image.title": "{{.ProjectName}}"
+       "org.opencontainers.image.version": "{{.Version}}"
+       "org.opencontainers.image.revision": "{{.FullCommit}}"
+       "org.opencontainers.image.source": "{{.GitURL}}"
+       "maintainer": "dev@netbird.io"
+   - id: netbird-proxy
+     disable: "{{ .Env.SKIP_DOCKER_PUSH }}"
+     ids:
+       - netbird-proxy
+     images:
+       - netbirdio/reverse-proxy
+       - ghcr.io/netbirdio/reverse-proxy
+     tags:
+       - "v{{ .Version }}"
+       - "{{ if eq .Env.SKIP_PUBLISH \"false\" }}latest{{ end }}"
+     dockerfile: proxy/Dockerfile
+     platforms:
+       - linux/amd64
+       - linux/arm64
+       - linux/arm
+     annotations:
+       "org.opencontainers.image.created": "{{.Date}}"
+       "org.opencontainers.image.title": "{{.ProjectName}}"
+       "org.opencontainers.image.version": "{{.Version}}"
+       "org.opencontainers.image.revision": "{{.FullCommit}}"
+       "org.opencontainers.image.source": "{{.GitURL}}"
+       "maintainer": "dev@netbird.io"
 
 brews:
   - ids:
       - default
+    skip_upload: "{{ .Env.SKIP_PUBLISH }}"
     repository:
       owner: netbirdio
       name: homebrew-tap
@@ -902,6 +440,7 @@ brews:
 
 uploads:
   - name: debian
+    skip: "{{ .Env.SKIP_PUBLISH }}"
     ids:
       - netbird_deb
     mode: archive
@@ -910,6 +449,7 @@ uploads:
     method: PUT
 
   - name: yum
+    skip: "{{ .Env.SKIP_PUBLISH }}"
     ids:
       - netbird_rpm
     mode: archive

.goreleaser_ui.yaml

@@ -1,5 +1,6 @@
 version: 2
-
+env:
+  - SKIP_PUBLISH={{ if index .Env "SKIP_PUBLISH" }}{{ .Env.SKIP_PUBLISH }}{{ else }}true{{ end }}
 project_name: netbird-ui
 builds:
   - id: netbird-ui
@@ -101,6 +102,7 @@ nfpms:
 
 uploads:
   - name: debian
+    skip: "{{ .Env.SKIP_PUBLISH }}"
     ids:
       - netbird_ui_deb
     mode: archive
@@ -109,6 +111,7 @@ uploads:
     method: PUT
 
   - name: yum
+    skip: "{{ .Env.SKIP_PUBLISH }}"
     ids:
       - netbird_ui_rpm
     mode: archive

CONTRIBUTING.md

@@ -15,6 +15,7 @@ If you haven't already, join our slack workspace [here](https://docs.netbird.io/
 - [Contributing to NetBird](#contributing-to-netbird)
     - [Contents](#contents)
     - [Code of conduct](#code-of-conduct)
+    - [Discuss changes with the NetBird team first](#discuss-changes-with-the-netbird-team-first)
     - [Directory structure](#directory-structure)
     - [Development setup](#development-setup)
         - [Requirements](#requirements)
@@ -33,6 +34,14 @@ Conduct which can be found in the file [CODE_OF_CONDUCT.md](CODE_OF_CONDUCT.md).
 By participating, you are expected to uphold this code. Please report
 unacceptable behavior to community@netbird.io.
 
+## Discuss changes with the NetBird team first
+
+Changes to the **public API**, **gRPC protocols**, **functionality behavior**, **CLI / service flags**, or **new features** should be discussed with the NetBird team before you start the work. These surfaces are part of NetBird's contract with operators, self-hosters, and downstream integrators, and changes to them have compatibility, security, and release-planning implications that benefit from an early conversation.
+
+Open an issue or reach out on [Slack](https://docs.netbird.io/slack-url) to talk through what you have in mind. We'll help shape the change, flag any constraints we know about, and confirm the direction so the PR review can focus on implementation rather than design.
+
+Typical bug fixes, internal refactors, documentation updates, and tests do not need pre-discussion — open the PR directly.
+
 ## Directory structure
 
 The NetBird project monorepo is organized to maintain most of its individual dependencies code within their directories, except for a few auxiliary or shared packages.

README.md

@@ -1,147 +1,134 @@
 
 <div align="center">
-<br/>
-  <br/>
-<p align="center">
-  <img width="234" src="docs/media/logo-full.png"/>
-</p>
-  <p>
-   <a href="https://img.shields.io/badge/license-BSD--3-blue)">
-       <img src="https://sonarcloud.io/api/project_badges/measure?project=netbirdio_netbird&metric=alert_status" />
-     </a> 
-     <a href="https://github.com/netbirdio/netbird/blob/main/LICENSE">
-       <img src="https://img.shields.io/badge/license-BSD--3-blue" />
-     </a> 
-    <br>
+  <p align="center">
+    <img width="234" src="docs/media/logo-full.png" alt="NetBird logo"/>
+  </p>
+  <p align="center">
+    <a href="https://sonarcloud.io/dashboard?id=netbirdio_netbird">
+      <img src="https://sonarcloud.io/api/project_badges/measure?project=netbirdio_netbird&metric=alert_status" alt="SonarCloud alert status"/>
+    </a>
+    <a href="https://github.com/netbirdio/netbird/blob/main/LICENSE">
+      <img src="https://img.shields.io/badge/license-BSD--3-blue" alt="BSD-3 License"/>
+    </a>
     <a href="https://docs.netbird.io/slack-url">
-        <img src="https://img.shields.io/badge/slack-@netbird-red.svg?logo=slack"/>
-     </a>
+      <img src="https://img.shields.io/badge/slack-@netbird-red.svg?logo=slack" alt="NetBird Slack"/>
+    </a>
     <a href="https://forum.netbird.io">
-        <img src="https://img.shields.io/badge/community forum-@netbird-red.svg?logo=discourse"/>
-     </a>  
-     <br>
+      <img src="https://img.shields.io/badge/community%20forum-@netbird-red.svg?logo=discourse" alt="Community forum"/>
+    </a>
     <a href="https://gurubase.io/g/netbird">
-        <img src="https://img.shields.io/badge/Gurubase-Ask%20NetBird%20Guru-006BFF"/>
-     </a>    
+      <img src="https://img.shields.io/badge/Gurubase-Ask%20NetBird%20Guru-006BFF" alt="Gurubase: Ask NetBird Guru"/>
+    </a>
   </p>
 </div>
 
-
 <p align="center">
-<strong>
-  Start using NetBird at <a href="https://netbird.io/pricing">netbird.io</a>
+  <strong>
+    Start using NetBird at <a href="https://netbird.io/pricing">netbird.io</a>
+    <br/>
+    See <a href="https://netbird.io/docs/">Documentation</a>
+    <br/>
+    Join our <a href="https://docs.netbird.io/slack-url">Slack channel</a> or our <a href="https://forum.netbird.io">Community forum</a>
+  </strong>
   <br/>
-  See <a href="https://netbird.io/docs/">Documentation</a>
   <br/>
-   Join our <a href="https://docs.netbird.io/slack-url">Slack channel</a> or our <a href="https://forum.netbird.io">Community forum</a>
-  <br/>
- 
-</strong>
-<br>
-<strong>
-  🚀 <a href="https://careers.netbird.io">We are hiring! Join us at careers.netbird.io</a>
-</strong>
-<br>
-<br>
-<a href="https://registry.terraform.io/providers/netbirdio/netbird/latest">
-    New: NetBird terraform provider
-  </a> 
+  <strong>
+    🚀 <a href="https://careers.netbird.io">We are hiring! Join us at careers.netbird.io</a>
+  </strong>
 </p>
 
-<br>
-
 **NetBird combines a configuration-free peer-to-peer private network and a centralized access control system in a single platform, making it easy to create secure private networks for your organization or home.**
 
 **Connect.** NetBird creates a WireGuard-based overlay network that automatically connects your machines over an encrypted tunnel, leaving behind the hassle of opening ports, complex firewall rules, VPN gateways, and so forth.
 
 **Secure.** NetBird enables secure remote access by applying granular access policies while allowing you to manage them intuitively from a single place. Works universally on any infrastructure.
 
-### Open Source Network Security in a Single Platform
-
 https://github.com/user-attachments/assets/10cec749-bb56-4ab3-97af-4e38850108d2
 
-### Self-Host NetBird (Video)
+### Self-host NetBird (video)
+
 [![Watch the video](https://img.youtube.com/vi/bZAgpT6nzaQ/0.jpg)](https://youtu.be/bZAgpT6nzaQ)
 
 ### Key features
 
-| Connectivity | Management | Security | Automation| Platforms |
-|----|----|----|----|----|
-| <ul><li>- \[x] Kernel WireGuard</ul></li> | <ul><li>- \[x] [Admin Web UI](https://github.com/netbirdio/dashboard)</ul></li> | <ul><li>- \[x] [SSO & MFA support](https://docs.netbird.io/how-to/installation#running-net-bird-with-sso-login)</ul></li> | <ul><li>- \[x] [Public API](https://docs.netbird.io/api)</ul></li> | <ul><li>- \[x] Linux</ul></li> |
-| <ul><li>- \[x] Peer-to-peer connections</ul></li> | <ul><li>- \[x] Auto peer discovery and configuration</ui></li> | <ul><li>- \[x] [Access control - groups & rules](https://docs.netbird.io/how-to/manage-network-access)</ui></li> | <ul><li>- \[x] [Setup keys for bulk network provisioning](https://docs.netbird.io/how-to/register-machines-using-setup-keys)</ui></li> | <ul><li>- \[x] Mac</ui></li> |
-| <ul><li>- \[x] Connection relay fallback</ui></li> | <ul><li>- \[x] [IdP integrations](https://docs.netbird.io/selfhosted/identity-providers)</ui></li> | <ul><li>- \[x] [Activity logging](https://docs.netbird.io/how-to/audit-events-logging)</ui></li> | <ul><li>- \[x] [Self-hosting quickstart script](https://docs.netbird.io/selfhosted/selfhosted-quickstart)</ui></li> | <ul><li>- \[x] Windows</ui></li> |
-| <ul><li>- \[x] [Routes to external networks](https://docs.netbird.io/how-to/routing-traffic-to-private-networks)</ui></li> | <ul><li>- \[x] [Private DNS](https://docs.netbird.io/how-to/manage-dns-in-your-network)</ui></li> | <ul><li>- \[x] [Device posture checks](https://docs.netbird.io/how-to/manage-posture-checks)</ui></li> | <ul><li>- \[x] IdP groups sync with JWT</ui></li> | <ul><li>- \[x] Android</ui></li> |
-| <ul><li>- \[x] NAT traversal with BPF</ui></li> | <ul><li>- \[x] [Multiuser support](https://docs.netbird.io/how-to/add-users-to-your-network)</ui></li> | <ul><li>- \[x] Peer-to-peer encryption</ui></li> || <ul><li>- \[x] iOS</ui></li> |
-||| <ul><li>- \[x] [Quantum-resistance with Rosenpass](https://netbird.io/knowledge-hub/the-first-quantum-resistant-mesh-vpn)</ui></li> || <ul><li>- \[x] OpenWRT</ui></li> |
-||| <ul><li>- \[x] [Periodic re-authentication](https://docs.netbird.io/how-to/enforce-periodic-user-authentication)</ui></li> || <ul><li>- \[x] [Serverless](https://docs.netbird.io/how-to/netbird-on-faas)</ui></li> |
-||||| <ul><li>- \[x] Docker</ui></li> |
+| Connectivity | Management | Security | Automation | Platforms |
+|---|---|---|---|---|
+| ✓ [Kernel WireGuard](https://docs.netbird.io/about-netbird/why-wireguard-with-netbird) | ✓ [Admin Web UI](https://github.com/netbirdio/dashboard) | ✓ [SSO & MFA support](https://docs.netbird.io/how-to/installation#running-net-bird-with-sso-login) | ✓ [Public API](https://docs.netbird.io/api) | ✓ [Linux](https://docs.netbird.io/get-started/install/linux) |
+| ✓ [Peer-to-peer connections](https://docs.netbird.io/about-netbird/how-netbird-works) | ✓ Auto peer discovery and configuration | ✓ [Access control: groups & rules](https://docs.netbird.io/how-to/manage-network-access) | ✓ [Setup keys for bulk provisioning](https://docs.netbird.io/how-to/register-machines-using-setup-keys) | ✓ [macOS](https://docs.netbird.io/get-started/install/macos) |
+| ✓ Connection relay fallback | ✓ [IdP integrations](https://docs.netbird.io/selfhosted/identity-providers) | ✓ [Activity logging](https://docs.netbird.io/how-to/audit-events-logging) | ✓ [Self-hosting quickstart script](https://docs.netbird.io/selfhosted/selfhosted-quickstart) | ✓ [Windows](https://docs.netbird.io/get-started/install/windows) |
+| ✓ [Routes to external networks](https://docs.netbird.io/how-to/routing-traffic-to-private-networks) | ✓ [Private DNS](https://docs.netbird.io/how-to/manage-dns-in-your-network) | ✓ [Traffic events](https://docs.netbird.io/manage/activity/traffic-events-logging) | ✓ [IdP groups sync with JWT](https://docs.netbird.io/manage/team/idp-sync) | ✓ [Android](https://docs.netbird.io/get-started/install/android) |
+| ✓ [Domain-based DNS routes](https://docs.netbird.io/manage/dns/dns-aliases-for-routed-networks) | ✓ [Custom DNS zones](https://docs.netbird.io/manage/dns/custom-zones) | ✓ [Device posture checks](https://docs.netbird.io/how-to/manage-posture-checks) | ✓ [Terraform provider](https://registry.terraform.io/providers/netbirdio/netbird/latest) | ✓ [Android TV](https://docs.netbird.io/get-started/install/android-tv) |
+| ✓ [Exit nodes](https://docs.netbird.io/manage/network-routes/use-cases/exit-nodes) | ✓ [Multiuser support](https://docs.netbird.io/how-to/add-users-to-your-network) | ✓ Peer-to-peer encryption | ✓ [Ansible collection](https://github.com/netbirdio/ansible-netbird) | ✓ [iOS](https://docs.netbird.io/get-started/install/ios) |
+| ✓ [IPv6 dual-stack overlay](https://docs.netbird.io/manage/settings/ipv6) | ✓ [Multi-account profile switching](https://docs.netbird.io/client/profiles) | ✓ [SSH with central access policies](https://docs.netbird.io/manage/peers/ssh) | | ✓ [Apple TV](https://docs.netbird.io/get-started/install/tvos) |
+| ✓ [Browser SSH & RDP](https://docs.netbird.io/manage/peers/browser-client) | | ✓ [Quantum-resistance with Rosenpass](https://netbird.io/knowledge-hub/the-first-quantum-resistant-mesh-vpn) | | ✓ FreeBSD |
+| ✓ [Reverse proxy with auto-TLS](https://docs.netbird.io/manage/reverse-proxy) | | ✓ [Periodic re-authentication](https://docs.netbird.io/how-to/enforce-periodic-user-authentication) | | ✓ [pfSense](https://docs.netbird.io/get-started/install/pfsense) |
+| | | | | ✓ [OPNsense](https://docs.netbird.io/get-started/install/opnsense) |
+| | | | | ✓ [MikroTik RouterOS](https://docs.netbird.io/use-cases/homelab/client-on-mikrotik-router) |
+| | | | | ✓ OpenWRT |
+| | | | | ✓ [Synology](https://docs.netbird.io/get-started/install/synology) |
+| | | | | ✓ [TrueNAS](https://docs.netbird.io/get-started/install/truenas) |
+| | | | | ✓ [Proxmox](https://docs.netbird.io/get-started/install/proxmox-ve) |
+| | | | | ✓ [Raspberry Pi](https://docs.netbird.io/get-started/install/raspberrypi) |
+| | | | | ✓ [Serverless](https://docs.netbird.io/how-to/netbird-on-faas) |
+| | | | | ✓ [Container](https://docs.netbird.io/get-started/install/docker) |
 
 ### Quickstart with NetBird Cloud
 
-- Download and install NetBird at [https://app.netbird.io/install](https://app.netbird.io/install)
-- Follow the steps to sign-up with Google, Microsoft, GitHub or your email address.
-- Check NetBird [admin UI](https://app.netbird.io/).
-- Add more machines.
+- Download and install NetBird at [https://app.netbird.io/install](https://app.netbird.io/install).
+- Follow the steps to sign up with Google, Microsoft, GitHub or your email address.
+- Check the NetBird [admin UI](https://app.netbird.io/).
 
 ### Quickstart with self-hosted NetBird
 
-> This is the quickest way to try self-hosted NetBird. It should take around 5 minutes to get started if you already have a public domain and a VM.
-Follow the [Advanced guide with a custom identity provider](https://docs.netbird.io/selfhosted/selfhosted-guide#advanced-guide-with-a-custom-identity-provider) for installations with different IDPs.
+This is the quickest way to try self-hosted NetBird. It should take around 5 minutes to get started if you already have a public domain and a VM. Follow the [Advanced guide with a custom identity provider](https://docs.netbird.io/selfhosted/selfhosted-guide#advanced-guide-with-a-custom-identity-provider) for installations with different IdPs.
 
 **Infrastructure requirements:**
-- A Linux VM with at least **1CPU** and **2GB** of memory.
-- The VM should be publicly accessible on TCP ports **80** and **443** and UDP port: **3478**.
-- **Public domain** name pointing to the VM.
+- A Linux VM with at least **1 CPU** and **2 GB** of memory.
+- The VM should be publicly accessible on TCP ports **80** and **443** and UDP port **3478**.
+- A **public domain** name pointing to the VM.
 
 **Software requirements:**
-- Docker installed on the VM with the docker-compose plugin ([Docker installation guide](https://docs.docker.com/engine/install/)) or docker with docker-compose in version 2 or higher.
-- [jq](https://jqlang.github.io/jq/) installed. In most distributions
-  Usually available in the official repositories and can be installed with `sudo apt install jq` or `sudo yum install jq`
-- [curl](https://curl.se/) installed.
-  Usually available in the official repositories and can be installed with `sudo apt install curl` or `sudo yum install curl`
+- Docker with the Compose plugin (Compose v2 or higher). See the [Docker installation guide](https://docs.docker.com/engine/install/).
 
 **Steps**
 - Download and run the installation script:
 ```bash
 export NETBIRD_DOMAIN=netbird.example.com; curl -fsSL https://github.com/netbirdio/netbird/releases/latest/download/getting-started.sh | bash
 ```
-- Once finished, you can manage the resources via `docker-compose`
 
 ### A bit on NetBird internals
--  Every machine in the network runs [NetBird Agent (or Client)](client/) that manages WireGuard.
--  Every agent connects to [Management Service](management/) that holds network state, manages peer IPs, and distributes network updates to agents (peers).
--  NetBird agent uses WebRTC ICE implemented in [pion/ice library](https://github.com/pion/ice) to discover connection candidates when establishing a peer-to-peer connection between machines.
--  Connection candidates are discovered with the help of [STUN](https://en.wikipedia.org/wiki/STUN) servers.
--  Agents negotiate a connection through [Signal Service](signal/) passing p2p encrypted messages with candidates.
--  Sometimes the NAT traversal is unsuccessful due to strict NATs (e.g. mobile carrier-grade NAT) and a p2p connection isn't possible. When this occurs the system falls back to a relay server called [TURN](https://en.wikipedia.org/wiki/Traversal_Using_Relays_around_NAT), and a secure WireGuard tunnel is established via the TURN server. 
- 
-[Coturn](https://github.com/coturn/coturn) is the one that has been successfully used for STUN and TURN in NetBird setups.
+- Every machine in the network runs the [NetBird agent](client/), which manages WireGuard.
+- Every agent connects to the [Management Service](management/), which holds network state, manages peer IPs, and distributes updates to agents.
+- Agents use ICE (via [pion/ice](https://github.com/pion/ice)) to discover connection candidates for peer-to-peer connections.
+- Candidates are discovered with the help of [STUN](https://en.wikipedia.org/wiki/STUN) servers.
+- Agents negotiate a connection through the [Signal Service](signal/), exchanging end-to-end encrypted messages with candidates.
+- When NAT traversal fails (e.g. mobile carrier-grade NAT) and a direct p2p connection isn't possible, the system falls back to a [Relay Service](relay/) and a secure WireGuard tunnel is established through it.
 
 <p float="left" align="middle">
-  <img src="https://docs.netbird.io/docs-static/img/about-netbird/high-level-dia.png" width="700"/>
+  <img src="https://docs.netbird.io/docs-static/img/about-netbird/high-level-dia.png" width="700" alt="NetBird high-level architecture diagram"/>
 </p>
 
 See a complete [architecture overview](https://docs.netbird.io/about-netbird/how-netbird-works#architecture) for details.
 
 ### Community projects
--  [NetBird installer script](https://github.com/physk/netbird-installer)
--  [NetBird ansible collection by Dominion Solutions](https://galaxy.ansible.com/ui/repo/published/dominion_solutions/netbird/)
--  [netbird-tui](https://github.com/n0pashkov/netbird-tui) — terminal UI for managing NetBird peers, routes, and settings
+- [NetBird installer script](https://github.com/physk/netbird-installer)
+- [netbird-tui](https://github.com/n0pashkov/netbird-tui) - terminal UI for managing NetBird peers, routes, and settings
+- [caddy-netbird](https://github.com/lixmal/caddy-netbird) - Caddy plugin that embeds a NetBird client for proxying HTTP and TCP/UDP traffic through NetBird networks
 
 **Note**: The `main` branch may be in an *unstable or even broken state* during development.
 For stable versions, see [releases](https://github.com/netbirdio/netbird/releases).
 
 ### Support acknowledgement
 
-In November 2022, NetBird joined the [StartUpSecure program](https://www.forschung-it-sicherheit-kommunikationssysteme.de/foerderung/bekanntmachungen/startup-secure) sponsored by The Federal Ministry of Education and Research of The Federal Republic of Germany. Together with [CISPA Helmholtz Center for Information Security](https://cispa.de/en) NetBird brings the security best practices and simplicity to private networking.
+In November 2022, NetBird joined the [StartUpSecure program](https://www.forschung-it-sicherheit-kommunikationssysteme.de/foerderung/bekanntmachungen/startup-secure) sponsored by the Federal Ministry of Education and Research of the Federal Republic of Germany. Together with the [CISPA Helmholtz Center for Information Security](https://cispa.de/en), NetBird brings security best practices and simplicity to private networking.
 
 ![CISPA_Logo_BLACK_EN_RZ_RGB (1)](https://user-images.githubusercontent.com/700848/203091324-c6d311a0-22b5-4b05-a288-91cbc6cdcc46.png)
 
-### Testimonials
-We use open-source technologies like [WireGuard®](https://www.wireguard.com/), [Pion ICE (WebRTC)](https://github.com/pion/ice), [Coturn](https://github.com/coturn/coturn), and [Rosenpass](https://rosenpass.eu). We very much appreciate the work these guys are doing and we'd greatly appreciate if you could support them in any way (e.g., by giving a star or a contribution).
+### Acknowledgements
+We build on open-source technologies like [WireGuard®](https://www.wireguard.com/), [Pion ICE](https://github.com/pion/ice), and [Rosenpass](https://rosenpass.eu). We greatly appreciate the work these projects are doing, and we'd love it if you could support them too (e.g., by starring or contributing).
 
 ### Legal
-This repository is licensed under BSD-3-Clause license that applies to all parts of the repository except for the directories management/, signal/ and relay/.
+This repository is licensed under the BSD-3-Clause license, which applies to all parts of the repository except for the directories management/, signal/ and relay/.
 Those directories are licensed under the GNU Affero General Public License version 3.0 (AGPLv3). See the respective LICENSE files inside each directory.
 
 _WireGuard_ and the _WireGuard_ logo are [registered trademarks](https://www.wireguard.com/trademark-policy/) of Jason A. Donenfeld.

client/Dockerfile

@@ -4,7 +4,7 @@
 #   sudo podman build -t localhost/netbird:latest -f client/Dockerfile --ignorefile .dockerignore-client .
 #   sudo podman run --rm -it --cap-add={BPF,NET_ADMIN,NET_RAW} localhost/netbird:latest
 
-FROM alpine:3.23.3
+FROM alpine:3.24
 # iproute2: busybox doesn't display ip rules properly
 RUN apk add --no-cache \
     bash \
@@ -21,7 +21,7 @@ ENV \
     NB_ENTRYPOINT_SERVICE_TIMEOUT="30"
 
 ENTRYPOINT [ "/usr/local/bin/netbird-entrypoint.sh" ]
-
-ARG NETBIRD_BINARY=netbird
+ARG TARGETPLATFORM
+ARG NETBIRD_BINARY=$TARGETPLATFORM/netbird
 COPY client/netbird-entrypoint.sh /usr/local/bin/netbird-entrypoint.sh
 COPY "${NETBIRD_BINARY}"  /usr/local/bin/netbird

client/Dockerfile-rootless

@@ -4,7 +4,7 @@
 #   podman build -t localhost/netbird:latest -f client/Dockerfile --ignorefile .dockerignore-client .
 #   podman run --rm -it --cap-add={BPF,NET_ADMIN,NET_RAW} localhost/netbird:latest
 
-FROM alpine:3.22.0
+FROM alpine:3.24
 
 RUN apk add --no-cache \
       bash \
@@ -27,7 +27,7 @@ ENV \
     NB_ENTRYPOINT_SERVICE_TIMEOUT="30"
 
 ENTRYPOINT [ "/usr/local/bin/netbird-entrypoint.sh" ]
-
-ARG NETBIRD_BINARY=netbird
+ARG TARGETPLATFORM
+ARG NETBIRD_BINARY=$TARGETPLATFORM/netbird
 COPY client/netbird-entrypoint.sh /usr/local/bin/netbird-entrypoint.sh
 COPY "${NETBIRD_BINARY}"  /usr/local/bin/netbird

client/android/profile_manager.go

@@ -6,7 +6,6 @@ import (
 	"fmt"
 	"os"
 	"path/filepath"
-	"strings"
 
 	log "github.com/sirupsen/logrus"
 
@@ -24,6 +23,7 @@ const (
 
 // Profile represents a profile for gomobile
 type Profile struct {
+	ID       string
 	Name     string
 	IsActive bool
 }
@@ -53,10 +53,10 @@ func (p *ProfileArray) Get(i int) *Profile {
 ├── state.json                                  ← Default profile state
 ├── active_profile.json                         ← Active profile tracker (JSON with Name + Username)
 └── profiles/                                   ← Subdirectory for non-default profiles
-    ├── work.json                              ← Work profile config
-    ├── work.state.json                        ← Work profile state
-    ├── personal.json                          ← Personal profile config
-    └── personal.state.json                    ← Personal profile state
+    ├── work.json                              			← Legacy work profile config
+    ├── work.state.json                        			← Legacy work profile state
+    ├── 4c5f5c8198c3989cffb5b5394f5a7ae0.json  			← ID profile config
+    ├── 4c5f5c8198c3989cffb5b5394f5a7ae0.state.json ← ID profile state
 */
 
 // ProfileManager manages profiles for Android
@@ -99,6 +99,7 @@ func (pm *ProfileManager) ListProfiles() (*ProfileArray, error) {
 	var profiles []*Profile
 	for _, p := range internalProfiles {
 		profiles = append(profiles, &Profile{
+			ID:       p.ID.String(),
 			Name:     p.Name,
 			IsActive: p.IsActive,
 		})
@@ -108,55 +109,65 @@ func (pm *ProfileManager) ListProfiles() (*ProfileArray, error) {
 }
 
 // GetActiveProfile returns the currently active profile name
-func (pm *ProfileManager) GetActiveProfile() (string, error) {
+func (pm *ProfileManager) GetActiveProfile() (*Profile, error) {
 	// Use ServiceManager to stay consistent with ListProfiles
 	// ServiceManager uses active_profile.json
 	activeState, err := pm.serviceMgr.GetActiveProfileState()
 	if err != nil {
-		return "", fmt.Errorf("failed to get active profile: %w", err)
+		return nil, fmt.Errorf("failed to get active profile: %w", err)
 	}
-	return activeState.Name, nil
+
+	// ActiveProfileState only stores the ID (and username), not the display
+	// name. Resolve the ID to the full profile so callers get the real Name.
+	prof, err := pm.serviceMgr.ResolveProfile(activeState.ID.String(), androidUsername)
+	if err != nil {
+		return nil, fmt.Errorf("failed to resolve active profile %q: %w", activeState.ID, err)
+	}
+	return &Profile{ID: prof.ID.String(), Name: prof.Name, IsActive: true}, nil
 }
 
 // SwitchProfile switches to a different profile
-func (pm *ProfileManager) SwitchProfile(profileName string) error {
+func (pm *ProfileManager) SwitchProfile(id string) error {
 	// Use ServiceManager to stay consistent with ListProfiles
 	// ServiceManager uses active_profile.json
 	err := pm.serviceMgr.SetActiveProfileState(&profilemanager.ActiveProfileState{
-		Name:     profileName,
+		ID:       profilemanager.ID(id),
 		Username: androidUsername,
 	})
 	if err != nil {
 		return fmt.Errorf("failed to switch profile: %w", err)
 	}
 
-	log.Infof("switched to profile: %s", profileName)
+	log.Infof("switched to profile: %s", id)
 	return nil
 }
 
 // AddProfile creates a new profile
 func (pm *ProfileManager) AddProfile(profileName string) error {
 	// Use ServiceManager (creates profile in profiles/ directory)
-	if err := pm.serviceMgr.AddProfile(profileName, androidUsername); err != nil {
+	profile, err := pm.serviceMgr.AddProfile(profileName, androidUsername)
+	if err != nil {
 		return fmt.Errorf("failed to add profile: %w", err)
 	}
 
-	log.Infof("created new profile: %s", profileName)
+	log.Infof("created new profile: %s", profile.ID)
 	return nil
 }
 
 // LogoutProfile logs out from a profile (clears authentication)
-func (pm *ProfileManager) LogoutProfile(profileName string) error {
-	profileName = sanitizeProfileName(profileName)
-
-	configPath, err := pm.getProfileConfigPath(profileName)
+func (pm *ProfileManager) LogoutProfile(id string) error {
+	configPath, err := pm.getProfileConfigPath(id)
 	if err != nil {
 		return err
 	}
 
+	if !profilemanager.IsValidProfileFilenameStem(profilemanager.ID(id)) {
+		return fmt.Errorf("id '%s' is not valid", id)
+	}
+
 	// Check if profile exists
 	if _, err := os.Stat(configPath); os.IsNotExist(err) {
-		return fmt.Errorf("profile '%s' does not exist", profileName)
+		return fmt.Errorf("profile '%s' does not exist", id)
 	}
 
 	// Read current config using internal profilemanager
@@ -174,53 +185,57 @@ func (pm *ProfileManager) LogoutProfile(profileName string) error {
 		return fmt.Errorf("failed to save config: %w", err)
 	}
 
-	log.Infof("logged out from profile: %s", profileName)
+	log.Infof("logged out from profile: %s", id)
 	return nil
 }
 
 // RemoveProfile deletes a profile
-func (pm *ProfileManager) RemoveProfile(profileName string) error {
+func (pm *ProfileManager) RemoveProfile(id string) error {
 	// Use ServiceManager (removes profile from profiles/ directory)
-	if err := pm.serviceMgr.RemoveProfile(profileName, androidUsername); err != nil {
+	if err := pm.serviceMgr.RemoveProfile(profilemanager.ID(id), androidUsername); err != nil {
 		return fmt.Errorf("failed to remove profile: %w", err)
 	}
 
-	log.Infof("removed profile: %s", profileName)
+	log.Infof("removed profile: %s", id)
 	return nil
 }
 
 // getProfileConfigPath returns the config file path for a profile
 // This is needed for Android-specific path handling (netbird.cfg for default profile)
-func (pm *ProfileManager) getProfileConfigPath(profileName string) (string, error) {
-	if profileName == "" || profileName == profilemanager.DefaultProfileName {
+func (pm *ProfileManager) getProfileConfigPath(id string) (string, error) {
+	if !profilemanager.IsValidProfileFilenameStem(profilemanager.ID(id)) {
+		return "", fmt.Errorf("id %q is not valid", id)
+	}
+
+	if id == profilemanager.DefaultProfileName {
 		// Android uses netbird.cfg for default profile instead of default.json
 		// Default profile is stored in root configDir, not in profiles/
 		return filepath.Join(pm.configDir, defaultConfigFilename), nil
 	}
 
-	// Non-default profiles are stored in profiles subdirectory
-	// This matches the Java Preferences.java expectation
-	profileName = sanitizeProfileName(profileName)
 	profilesDir := filepath.Join(pm.configDir, profilesSubdir)
-	return filepath.Join(profilesDir, profileName+".json"), nil
+	return filepath.Join(profilesDir, id+".json"), nil
 }
 
-// GetConfigPath returns the config file path for a given profile
+// GetConfigPath returns the config file path for a given profile id
 // Java should call this instead of constructing paths with Preferences.configFile()
-func (pm *ProfileManager) GetConfigPath(profileName string) (string, error) {
-	return pm.getProfileConfigPath(profileName)
+func (pm *ProfileManager) GetConfigPath(id string) (string, error) {
+	return pm.getProfileConfigPath(id)
 }
 
 // GetStateFilePath returns the state file path for a given profile
 // Java should call this instead of constructing paths with Preferences.stateFile()
-func (pm *ProfileManager) GetStateFilePath(profileName string) (string, error) {
-	if profileName == "" || profileName == profilemanager.DefaultProfileName {
+func (pm *ProfileManager) GetStateFilePath(id string) (string, error) {
+	if id == "" || id == profilemanager.DefaultProfileName {
 		return filepath.Join(pm.configDir, "state.json"), nil
 	}
 
-	profileName = sanitizeProfileName(profileName)
+	if !profilemanager.IsValidProfileFilenameStem(profilemanager.ID(id)) {
+		return "", fmt.Errorf("id %q is not valid", id)
+	}
+
 	profilesDir := filepath.Join(pm.configDir, profilesSubdir)
-	return filepath.Join(profilesDir, profileName+".state.json"), nil
+	return filepath.Join(profilesDir, id+".state.json"), nil
 }
 
 // GetActiveConfigPath returns the config file path for the currently active profile
@@ -230,7 +245,7 @@ func (pm *ProfileManager) GetActiveConfigPath() (string, error) {
 	if err != nil {
 		return "", fmt.Errorf("failed to get active profile: %w", err)
 	}
-	return pm.GetConfigPath(activeProfile)
+	return pm.GetConfigPath(activeProfile.ID)
 }
 
 // GetActiveStateFilePath returns the state file path for the currently active profile
@@ -240,18 +255,5 @@ func (pm *ProfileManager) GetActiveStateFilePath() (string, error) {
 	if err != nil {
 		return "", fmt.Errorf("failed to get active profile: %w", err)
 	}
-	return pm.GetStateFilePath(activeProfile)
-}
-
-// sanitizeProfileName removes invalid characters from profile name
-func sanitizeProfileName(name string) string {
-	// Keep only alphanumeric, underscore, and hyphen
-	var result strings.Builder
-	for _, r := range name {
-		if (r >= 'a' && r <= 'z') || (r >= 'A' && r <= 'Z') ||
-			(r >= '0' && r <= '9') || r == '_' || r == '-' {
-			result.WriteRune(r)
-		}
-	}
-	return result.String()
+	return pm.GetStateFilePath(activeProfile.ID)
 }

client/cmd/debug.go

@@ -3,12 +3,14 @@ package cmd
 import (
 	"context"
 	"fmt"
+	"os/user"
 	"strings"
 	"time"
 
 	log "github.com/sirupsen/logrus"
 	"github.com/spf13/cobra"
 	"google.golang.org/grpc/status"
+	"google.golang.org/protobuf/encoding/protojson"
 	"google.golang.org/protobuf/types/known/durationpb"
 
 	"github.com/netbirdio/netbird/client/internal"
@@ -19,6 +21,7 @@ import (
 	"github.com/netbirdio/netbird/client/server"
 	mgmProto "github.com/netbirdio/netbird/shared/management/proto"
 	"github.com/netbirdio/netbird/upload-server/types"
+	"github.com/netbirdio/netbird/version"
 )
 
 const errCloseConnection = "Failed to close connection: %v"
@@ -84,6 +87,73 @@ var persistenceCmd = &cobra.Command{
 	RunE:    setSyncResponsePersistence,
 }
 
+var debugConfigCmd = &cobra.Command{
+	Use:     "config",
+	Example: "  netbird debug config",
+	Short:   "Dump the effective configuration",
+	Long:    "Prints the daemon's resolved configuration (after applying defaults, file, env, CLI input, and MDM policy overrides) as JSON. Includes the list of MDM-managed fields.",
+	RunE:    debugConfigDump,
+}
+
+// debugConfigDump implements `netbird debug config`. It resolves the
+// active profile, queries the daemon for the effective configuration
+// via GetConfig, and prints the resulting GetConfigResponse as JSON
+// (via protojson with EmitUnpopulated=true so the output is stable
+// across runs and includes zero-valued fields).
+//
+// Useful for verifying MDM enforcement end-to-end: the response's
+// mDMManagedFields array is the single source of truth for "which
+// fields is the daemon currently enforcing from the MDM source", and
+// every config field side-by-side with that list confirms the merge
+// result. Secrets in the response (e.g. PreSharedKey) are already
+// redacted by the daemon-side handler.
+func debugConfigDump(cmd *cobra.Command, _ []string) error {
+	pm := profilemanager.NewProfileManager()
+	activeProf, err := pm.GetActiveProfile()
+	if err != nil {
+		return fmt.Errorf("get active profile: %v", err)
+	}
+	currUser, err := user.Current()
+	if err != nil {
+		return fmt.Errorf("get current user: %v", err)
+	}
+
+	conn, err := getClient(cmd)
+	if err != nil {
+		return err
+	}
+	defer func() {
+		if err := conn.Close(); err != nil {
+			log.Errorf(errCloseConnection, err)
+		}
+	}()
+
+	client := proto.NewDaemonServiceClient(conn)
+	resp, err := client.GetConfig(cmd.Context(), &proto.GetConfigRequest{
+		ProfileName: activeProf.Name,
+		Username:    currUser.Username,
+	})
+	if err != nil {
+		return fmt.Errorf("failed to get config: %v", status.Convert(err).Message())
+	}
+
+	// Use protojson so well-known fields render correctly; emit defaults so
+	// the operator sees every field even when zero/empty.
+	m := protojson.MarshalOptions{Multiline: true, Indent: "  ", EmitUnpopulated: true}
+	out, err := m.Marshal(resp)
+	if err != nil {
+		return fmt.Errorf("marshal config: %w", err)
+	}
+	cmd.Println(string(out))
+	return nil
+}
+
+// debugBundle requests the daemon to create a debug bundle and prints
+// the resulting local file path and, if uploaded, the uploaded file
+// key. It uses the package flags (anonymize, system info, log file
+// count, CLI version, optional upload URL) to configure the bundle
+// request. Returns an error if the RPC fails or if the daemon reports
+// an upload failure reason.
 func debugBundle(cmd *cobra.Command, _ []string) error {
 	conn, err := getClient(cmd)
 	if err != nil {
@@ -100,6 +170,7 @@ func debugBundle(cmd *cobra.Command, _ []string) error {
 		Anonymize:    anonymizeFlag,
 		SystemInfo:   systemInfoFlag,
 		LogFileCount: logFileCount,
+		CliVersion:   version.NetbirdVersion(),
 	}
 	if uploadBundleFlag {
 		request.UploadURL = uploadBundleURLFlag
@@ -298,6 +369,7 @@ func runForDuration(cmd *cobra.Command, args []string) error {
 		Anonymize:    anonymizeFlag,
 		SystemInfo:   systemInfoFlag,
 		LogFileCount: logFileCount,
+		CliVersion:   version.NetbirdVersion(),
 	}
 	if uploadBundleFlag {
 		request.UploadURL = uploadBundleURLFlag
@@ -432,6 +504,7 @@ func generateDebugBundle(config *profilemanager.Config, recorder *peer.Status, c
 			SyncResponse:   syncResponse,
 			LogPath:        logFilePath,
 			CPUProfile:     nil,
+			DaemonVersion:  version.NetbirdVersion(), // acting as daemon
 		},
 		debug.BundleConfig{
 			IncludeSystemInfo: true,

client/cmd/kubernetes.go

@@ -0,0 +1,301 @@
+package cmd
+
+import (
+	"context"
+	"crypto/tls"
+	"encoding/json"
+	"errors"
+	"fmt"
+	"io"
+	"net"
+	"net/http"
+	"net/url"
+	"os"
+	"path/filepath"
+	"slices"
+	"strings"
+
+	"github.com/goccy/go-yaml"
+	log "github.com/sirupsen/logrus"
+	"github.com/spf13/cobra"
+
+	"github.com/netbirdio/netbird/client/proto"
+)
+
+const (
+	KubernetesDNSSuffix = "netbird-kubeapi-proxy"
+)
+
+var kubernetesCmd = &cobra.Command{
+	Use:   "kubernetes",
+	Short: "Kubernetes cluster commands.",
+	Long:  "Kubernetes cluster commands.",
+}
+
+var kubernetesListCmd = &cobra.Command{
+	Use:   "list",
+	RunE:  kubernetesList,
+	Short: "List Kubernetes clusters.",
+	Long:  "List Kubernetes clusters by discovering NetBird peers running netbird-kubeapi-proxy.",
+}
+
+var kubernetesWriteKubeconfigCmd = &cobra.Command{
+	Use:   "write-kubeconfig",
+	RunE:  kubernetesWriteKubeconfig,
+	Args:  cobra.ExactArgs(1),
+	Short: "Write kubeconfig for a Kubernetes cluster.",
+	Long:  "Updates kubeconfig in place to allow token-less access to the Kubernetes cluster through NetBird.",
+}
+
+func init() {
+	kubernetesWriteKubeconfigCmd.Flags().String("kubeconfig", "", "path to kubeconfig file")
+}
+
+func kubernetesList(cmd *cobra.Command, _ []string) error {
+	conn, err := getClient(cmd)
+	if err != nil {
+		return err
+	}
+	defer conn.Close()
+	client := proto.NewDaemonServiceClient(conn)
+	statusResp, err := client.Status(cmd.Context(), &proto.StatusRequest{GetFullPeerStatus: true})
+	if err != nil {
+		return err
+	}
+
+	kcs, err := getKubernetesClusters(cmd.Context(), statusResp.FullStatus.Peers, "")
+	if err != nil {
+		return err
+	}
+	if len(kcs) == 0 {
+		cmd.Println("No Kubernetes clusters available.")
+		return nil
+	}
+	cmd.Println("Available Kubernetes clusters:")
+	for _, k := range kcs {
+		cmd.Printf("\n  - Name: %s\n    FQDN: %s\n    Version: %s\n", k.name, k.url.Host, k.version)
+	}
+	return nil
+}
+
+func kubernetesWriteKubeconfig(cmd *cobra.Command, args []string) error {
+	kubeconfigPath, err := resolveKubeconfigPath(cmd)
+	if err != nil {
+		return err
+	}
+
+	conn, err := getClient(cmd)
+	if err != nil {
+		return err
+	}
+	defer conn.Close()
+	client := proto.NewDaemonServiceClient(conn)
+	statusResp, err := client.Status(cmd.Context(), &proto.StatusRequest{GetFullPeerStatus: true})
+	if err != nil {
+		return err
+	}
+
+	clusterName := args[0]
+	kcs, err := getKubernetesClusters(cmd.Context(), statusResp.FullStatus.Peers, clusterName)
+	if err != nil {
+		return err
+	}
+	if len(kcs) == 0 {
+		return fmt.Errorf("kubernetes cluster named %s not found", clusterName)
+	}
+	if len(kcs) > 1 {
+		return fmt.Errorf("too many Kubernetes clusters returned")
+	}
+	err = writeKubeconfig(kubeconfigPath, kcs[0])
+	if err != nil {
+		return err
+	}
+	return nil
+}
+
+type kubernetesCluster struct {
+	name    string
+	url     *url.URL
+	version string
+}
+
+func getKubernetesClusters(ctx context.Context, peers []*proto.PeerState, nameFilter string) ([]kubernetesCluster, error) {
+	transport := http.DefaultTransport.(*http.Transport).Clone()
+	transport.TLSClientConfig = &tls.Config{
+		InsecureSkipVerify: true,
+	}
+	httpClient := &http.Client{
+		Transport: transport,
+	}
+	resolver := net.Resolver{
+		// Required so both DNS records are returned.
+		// https://github.com/golang/go/issues/17093
+		PreferGo: true,
+	}
+
+	kcs := []kubernetesCluster{}
+	attempted := map[string]struct{}{}
+	for _, peer := range peers {
+		fqdns, err := resolver.LookupAddr(ctx, peer.IP)
+		if err != nil {
+			return nil, err
+		}
+		for _, fqdn := range fqdns {
+			if _, ok := attempted[fqdn]; ok {
+				continue
+			}
+			attempted[fqdn] = struct{}{}
+			comps := strings.Split(fqdn, ".")
+			if len(comps) < 2 {
+				continue
+			}
+			if comps[1] != KubernetesDNSSuffix {
+				continue
+			}
+			if nameFilter != "" && nameFilter != comps[0] {
+				continue
+			}
+			clusterURL, clusterVersion, err := fingerprintClusters(ctx, httpClient, fqdn)
+			if err != nil {
+				log.Debugf("could not fingerprint Kubernetes cluster %s %q", fqdn, err)
+				continue
+			}
+			kc := kubernetesCluster{
+				name:    comps[0],
+				url:     clusterURL,
+				version: clusterVersion,
+			}
+			if nameFilter != "" {
+				return []kubernetesCluster{kc}, nil
+			}
+			kcs = append(kcs, kc)
+		}
+	}
+	return kcs, nil
+}
+
+func fingerprintClusters(ctx context.Context, httpClient *http.Client, fqdn string) (*url.URL, string, error) {
+	clusterURL, err := url.Parse("https://" + fqdn)
+	if err != nil {
+		return nil, "", err
+	}
+	versionURL, err := clusterURL.Parse("/version")
+	if err != nil {
+		return nil, "", err
+	}
+	req, err := http.NewRequestWithContext(ctx, http.MethodGet, versionURL.String(), nil)
+	if err != nil {
+		return nil, "", err
+	}
+	resp, err := httpClient.Do(req)
+	if err != nil {
+		return nil, "", err
+	}
+	defer resp.Body.Close()
+	if resp.StatusCode != http.StatusOK {
+		return nil, "", fmt.Errorf("expected %d response but got %s", http.StatusOK, resp.Status)
+	}
+	b, err := io.ReadAll(resp.Body)
+	if err != nil {
+		return nil, "", err
+	}
+	versionData := map[string]string{}
+	err = json.Unmarshal(b, &versionData)
+	if err != nil {
+		return nil, "", err
+	}
+	version, ok := versionData["gitVersion"]
+	if !ok {
+		return nil, "", errors.New("no version found in response")
+	}
+	return clusterURL, version, nil
+}
+
+func resolveKubeconfigPath(cmd *cobra.Command) (string, error) {
+	if cmd.Flags().Changed("kubeconfig") {
+		path, err := cmd.Flags().GetString("kubeconfig")
+		if err != nil {
+			return "", err
+		}
+		return path, nil
+	}
+	if env := os.Getenv("KUBECONFIG"); env != "" {
+		return env, nil
+	}
+	home, err := os.UserHomeDir()
+	if err != nil {
+		return "", fmt.Errorf("could not determine home directory: %w", err)
+	}
+	return filepath.Join(home, ".kube", "config"), nil
+}
+
+func writeKubeconfig(kubeconfigPath string, kc kubernetesCluster) error {
+	b, err := os.ReadFile(kubeconfigPath)
+	if err != nil && !errors.Is(err, os.ErrNotExist) {
+		return err
+	}
+	var cfg map[string]any
+	if err := yaml.Unmarshal(b, &cfg); err != nil {
+		return err
+	}
+	if cfg == nil {
+		cfg = map[string]any{
+			"apiVersion": "v1",
+			"kind":       "Config",
+		}
+	}
+
+	cfg["clusters"] = appendWithName(cfg["clusters"], map[string]any{
+		"name": kc.name,
+		"cluster": map[string]any{
+			"server":                   kc.url.String(),
+			"insecure-skip-tls-verify": true,
+		},
+	})
+	cfg["users"] = appendWithName(cfg["users"], map[string]any{
+		"name": "netbird",
+		"user": map[string]any{
+			"token": "none",
+		},
+	})
+	cfg["contexts"] = appendWithName(cfg["contexts"], map[string]any{
+		"name": kc.name,
+		"context": map[string]any{
+			"cluster":   kc.name,
+			"user":      "netbird",
+			"namespace": "default",
+		},
+	})
+	cfg["current-context"] = kc.name
+
+	out, err := yaml.Marshal(cfg)
+	if err != nil {
+		return err
+	}
+	if err := os.WriteFile(kubeconfigPath, out, 0o600); err != nil {
+		return err
+	}
+	return nil
+}
+
+func appendWithName(data any, add map[string]any) any {
+	if data == nil {
+		return []any{add}
+	}
+	v, ok := data.([]any)
+	if !ok {
+		return []any{add}
+	}
+	i := slices.IndexFunc(v, func(item any) bool {
+		m, ok := item.(map[string]any)
+		if !ok {
+			return false
+		}
+		return m["name"] == add["name"]
+	})
+	if i == -1 {
+		return append(v, add)
+	}
+	v[i] = add
+	return v
+}

client/cmd/kubernetes_test.go

@@ -0,0 +1,120 @@
+package cmd
+
+import (
+	"net/http"
+	"net/http/httptest"
+	"net/url"
+	"os"
+	"path/filepath"
+	"testing"
+
+	"github.com/spf13/cobra"
+	"github.com/stretchr/testify/require"
+)
+
+func TestFingerprintClusters(t *testing.T) {
+	t.Parallel()
+
+	srv := httptest.NewTLSServer(http.HandlerFunc(func(w http.ResponseWriter, r *http.Request) {
+		//nolint: errcheck
+		w.Write([]byte(`{"gitVersion": "foobar"}`))
+	}))
+	defer srv.Close()
+
+	clusterURL, clusterVersion, err := fingerprintClusters(t.Context(), srv.Client(), srv.Listener.Addr().String())
+	require.NoError(t, err)
+	require.Equal(t, srv.URL, clusterURL.String())
+	require.Equal(t, "foobar", clusterVersion)
+}
+
+func TestResolveKubeconfigPath(t *testing.T) {
+	home, err := os.UserHomeDir()
+	if err != nil {
+		t.Fatalf("could not determine home directory: %v", err)
+	}
+	defaultPath := filepath.Join(home, ".kube", "config")
+	path, err := resolveKubeconfigPath(&cobra.Command{})
+	require.NoError(t, err)
+	require.Equal(t, defaultPath, path)
+
+	flagPath := "flag-path"
+	cmd := &cobra.Command{}
+	cmd.Flags().String("kubeconfig", "", "")
+	err = cmd.Flags().Set("kubeconfig", flagPath)
+	require.NoError(t, err)
+	path, err = resolveKubeconfigPath(cmd)
+	require.NoError(t, err)
+	require.Equal(t, flagPath, path)
+
+	envPath := "env-path"
+	t.Setenv("KUBECONFIG", envPath)
+	path, err = resolveKubeconfigPath(&cobra.Command{})
+	require.NoError(t, err)
+	require.Equal(t, envPath, path)
+}
+
+func TestWriteKubeconfig(t *testing.T) {
+	t.Parallel()
+
+	tests := []struct {
+		name     string
+		existing string
+	}{
+		{
+			name: "empty file",
+		},
+		{
+			name: "existing content",
+			existing: `apiVersion: v1
+clusters:
+- cluster:
+    insecure-skip-tls-verify: true
+    server: https://foobar.com
+  name: foo
+current-context: test
+kind: Config
+users: []
+`,
+		},
+	}
+	for _, tt := range tests {
+		t.Run(tt.name, func(t *testing.T) {
+			t.Parallel()
+
+			kubeconfigPath := filepath.Join(t.TempDir(), "config")
+			err := os.WriteFile(kubeconfigPath, []byte(tt.existing), 0o644)
+			require.NoError(t, err)
+
+			kc := kubernetesCluster{
+				name: "foo",
+				url:  &url.URL{Scheme: "https", Host: "example.com"},
+			}
+			err = writeKubeconfig(kubeconfigPath, kc)
+			require.NoError(t, err)
+
+			b, err := os.ReadFile(kubeconfigPath)
+			require.NoError(t, err)
+			expected := `apiVersion: v1
+clusters:
+- cluster:
+    insecure-skip-tls-verify: true
+    server: https://example.com
+  name: foo
+contexts:
+- context:
+    cluster: foo
+    namespace: default
+    user: netbird
+  name: foo
+current-context: foo
+kind: Config
+users:
+- name: netbird
+  user:
+    token: none
+`
+			require.Equal(t, expected, string(b))
+		})
+	}
+
+}

client/cmd/login.go

@@ -96,17 +96,19 @@ func doDaemonLogin(ctx context.Context, cmd *cobra.Command, providedSetupKey str
 		dnsLabelsReq = dnsLabelsValidated.ToSafeStringList()
 	}
 
+	handle := activeProf.ID.String()
+
 	loginRequest := proto.LoginRequest{
 		SetupKey:            providedSetupKey,
 		ManagementUrl:       managementURL,
 		IsUnixDesktopClient: isUnixRunningDesktop(),
 		Hostname:            hostName,
 		DnsLabels:           dnsLabelsReq,
-		ProfileName:         &activeProf.Name,
+		ProfileName:         &handle,
 		Username:            &username,
 	}
 
-	profileState, err := pm.GetProfileState(activeProf.Name)
+	profileState, err := pm.GetProfileState(activeProf.ID)
 	if err != nil {
 		log.Debugf("failed to get profile state for login hint: %v", err)
 	} else if profileState.Email != "" {
@@ -170,14 +172,13 @@ func getActiveProfile(ctx context.Context, pm *profilemanager.ProfileManager, pr
 	return activeProf, nil
 }
 
-func switchProfileOnDaemon(ctx context.Context, pm *profilemanager.ProfileManager, profileName string, username string) error {
-	err := switchProfile(context.Background(), profileName, username)
+func switchProfileOnDaemon(ctx context.Context, pm *profilemanager.ProfileManager, handle string, username string) error {
+	resolvedID, err := switchProfile(ctx, handle, username)
 	if err != nil {
 		return fmt.Errorf("switch profile on daemon: %v", err)
 	}
 
-	err = pm.SwitchProfile(profileName)
-	if err != nil {
+	if err := pm.SwitchProfile(resolvedID); err != nil {
 		return fmt.Errorf("switch profile: %v", err)
 	}
 
@@ -205,11 +206,15 @@ func switchProfileOnDaemon(ctx context.Context, pm *profilemanager.ProfileManage
 	return nil
 }
 
-func switchProfile(ctx context.Context, profileName string, username string) error {
+// switchProfile asks the daemon to switch to the profile identified by
+// handle (a name, ID, or unique ID prefix). Returns the resolved profile
+// ID so the caller can update the local active-profile state without
+// re-resolving the handle.
+func switchProfile(ctx context.Context, handle string, username string) (profilemanager.ID, error) {
 	conn, err := DialClientGRPCServer(ctx, daemonAddr)
 	if err != nil {
 		//nolint
-		return fmt.Errorf("failed to connect to daemon error: %v\n"+
+		return "", fmt.Errorf("failed to connect to daemon error: %v\n"+
 			"If the daemon is not running please run: "+
 			"\nnetbird service install \nnetbird service start\n", err)
 	}
@@ -217,15 +222,15 @@ func switchProfile(ctx context.Context, profileName string, username string) err
 
 	client := proto.NewDaemonServiceClient(conn)
 
-	_, err = client.SwitchProfile(ctx, &proto.SwitchProfileRequest{
-		ProfileName: &profileName,
+	resp, err := client.SwitchProfile(ctx, &proto.SwitchProfileRequest{
+		ProfileName: &handle,
 		Username:    &username,
 	})
 	if err != nil {
-		return fmt.Errorf("switch profile failed: %v", err)
+		return "", fmt.Errorf("switch profile failed: %v", err)
 	}
 
-	return nil
+	return profilemanager.ID(resp.Id), nil
 }
 
 func doForegroundLogin(ctx context.Context, cmd *cobra.Command, setupKey string, activeProf *profilemanager.Profile) error {
@@ -249,7 +254,7 @@ func doForegroundLogin(ctx context.Context, cmd *cobra.Command, setupKey string,
 		return fmt.Errorf("read config file %s: %v", configFilePath, err)
 	}
 
-	err = foregroundLogin(ctx, cmd, config, setupKey, activeProf.Name)
+	err = foregroundLogin(ctx, cmd, config, setupKey, activeProf.ID)
 	if err != nil {
 		return fmt.Errorf("foreground login failed: %v", err)
 	}
@@ -277,7 +282,7 @@ func handleSSOLogin(ctx context.Context, cmd *cobra.Command, loginResp *proto.Lo
 	return nil
 }
 
-func foregroundLogin(ctx context.Context, cmd *cobra.Command, config *profilemanager.Config, setupKey, profileName string) error {
+func foregroundLogin(ctx context.Context, cmd *cobra.Command, config *profilemanager.Config, setupKey string, profileID profilemanager.ID) error {
 	authClient, err := auth.NewAuth(ctx, config.PrivateKey, config.ManagementURL, config)
 	if err != nil {
 		return fmt.Errorf("failed to create auth client: %v", err)
@@ -291,7 +296,7 @@ func foregroundLogin(ctx context.Context, cmd *cobra.Command, config *profileman
 
 	jwtToken := ""
 	if setupKey == "" && needsLogin {
-		tokenInfo, err := foregroundGetTokenInfo(ctx, cmd, config, profileName)
+		tokenInfo, err := foregroundGetTokenInfo(ctx, cmd, config, profileID)
 		if err != nil {
 			return fmt.Errorf("interactive sso login failed: %v", err)
 		}
@@ -306,10 +311,10 @@ func foregroundLogin(ctx context.Context, cmd *cobra.Command, config *profileman
 	return nil
 }
 
-func foregroundGetTokenInfo(ctx context.Context, cmd *cobra.Command, config *profilemanager.Config, profileName string) (*auth.TokenInfo, error) {
+func foregroundGetTokenInfo(ctx context.Context, cmd *cobra.Command, config *profilemanager.Config, profileID profilemanager.ID) (*auth.TokenInfo, error) {
 	hint := ""
 	pm := profilemanager.NewProfileManager()
-	profileState, err := pm.GetProfileState(profileName)
+	profileState, err := pm.GetProfileState(profileID)
 	if err != nil {
 		log.Debugf("failed to get profile state for login hint: %v", err)
 	} else if profileState.Email != "" {

client/cmd/login_test.go

@@ -27,7 +27,7 @@ func TestLogin(t *testing.T) {
 	profilemanager.ActiveProfileStatePath = tempDir + "/active_profile.json"
 	sm := profilemanager.ServiceManager{}
 	err = sm.SetActiveProfileState(&profilemanager.ActiveProfileState{
-		Name:     "default",
+		ID:       "default",
 		Username: currUser.Username,
 	})
 	if err != nil {

client/cmd/profile.go

@@ -2,11 +2,16 @@ package cmd
 
 import (
 	"context"
+	"errors"
 	"fmt"
 	"os/user"
+	"strings"
+	"text/tabwriter"
 	"time"
 
 	"github.com/spf13/cobra"
+	"google.golang.org/grpc/codes"
+	gstatus "google.golang.org/grpc/status"
 
 	"github.com/netbirdio/netbird/client/internal"
 	"github.com/netbirdio/netbird/client/internal/profilemanager"
@@ -14,6 +19,8 @@ import (
 	"github.com/netbirdio/netbird/util"
 )
 
+var profileListShowID bool
+
 var profileCmd = &cobra.Command{
 	Use:   "profile",
 	Short: "Manage NetBird client profiles",
@@ -31,27 +38,40 @@ var profileListCmd = &cobra.Command{
 var profileAddCmd = &cobra.Command{
 	Use:   "add <profile_name>",
 	Short: "Add a new profile",
-	Long:  `Add a new profile to the NetBird client. The profile name must be unique.`,
+	Long:  `Add a new profile. Profile name is free-form, a unique ID is generated for the on-disk config file.`,
 	Args:  cobra.ExactArgs(1),
 	RunE:  addProfileFunc,
 }
 
+var profileRenameCmd = &cobra.Command{
+	Use:   "rename <profile> <new_profile_name>",
+	Short: "Renames an existing profile",
+	Long:  `Renames an existing profile (by a name, ID, or unique ID prefix). Profile name is free-form.`,
+	Args:  cobra.ExactArgs(2),
+	RunE:  renameProfileFunc,
+}
+
 var profileRemoveCmd = &cobra.Command{
-	Use:   "remove <profile_name>",
-	Short: "Remove a profile",
-	Long:  `Remove a profile from the NetBird client. The profile must not be inactive.`,
-	Args:  cobra.ExactArgs(1),
-	RunE:  removeProfileFunc,
+	Use:     "remove <profile>",
+	Short:   "Remove a profile",
+	Long:    `Remove a profile by name, ID, or unique ID prefix.`,
+	Aliases: []string{"rm"},
+	Args:    cobra.ExactArgs(1),
+	RunE:    removeProfileFunc,
 }
 
 var profileSelectCmd = &cobra.Command{
-	Use:   "select <profile_name>",
+	Use:   "select <profile>",
 	Short: "Select a profile",
-	Long:  `Make the specified profile active. This will switch the client to use the selected profile's configuration.`,
+	Long:  `Make the specified profile active. Accepts a name, ID, or unique ID prefix.`,
 	Args:  cobra.ExactArgs(1),
 	RunE:  selectProfileFunc,
 }
 
+func init() {
+	profileListCmd.Flags().BoolVar(&profileListShowID, "show-id", false, "show the profile ID column")
+}
+
 func setupCmd(cmd *cobra.Command) error {
 	SetFlagsFromEnvVars(rootCmd)
 	SetFlagsFromEnvVars(cmd)
@@ -65,6 +85,7 @@ func setupCmd(cmd *cobra.Command) error {
 
 	return nil
 }
+
 func listProfilesFunc(cmd *cobra.Command, _ []string) error {
 	if err := setupCmd(cmd); err != nil {
 		return err
@@ -83,25 +104,33 @@ func listProfilesFunc(cmd *cobra.Command, _ []string) error {
 
 	daemonClient := proto.NewDaemonServiceClient(conn)
 
-	profiles, err := daemonClient.ListProfiles(cmd.Context(), &proto.ListProfilesRequest{
+	resp, err := daemonClient.ListProfiles(cmd.Context(), &proto.ListProfilesRequest{
 		Username: currUser.Username,
 	})
 	if err != nil {
 		return err
 	}
 
-	// list profiles, add a tick if the profile is active
-	cmd.Println("Found", len(profiles.Profiles), "profiles:")
-	for _, profile := range profiles.Profiles {
-		// use a cross to indicate the passive profiles
-		activeMarker := "✗"
-		if profile.IsActive {
-			activeMarker = "✓"
-		}
-		cmd.Println(activeMarker, profile.Name)
+	tw := tabwriter.NewWriter(cmd.OutOrStdout(), 0, 0, 2, ' ', 0)
+	if profileListShowID {
+		fmt.Fprintln(tw, "ID\tNAME\tACTIVE")
+	} else {
+		fmt.Fprintln(tw, "NAME\tACTIVE")
 	}
-
-	return nil
+	for _, profile := range resp.Profiles {
+		marker := ""
+		if profile.IsActive {
+			marker = "✓"
+		}
+		name := profilemanager.StripCtrlChars(profile.Name)
+		id := profilemanager.ID(profile.Id)
+		if profileListShowID {
+			fmt.Fprintf(tw, "%s\t%s\t%s\n", id.ShortID(), name, marker)
+		} else {
+			fmt.Fprintf(tw, "%s\t%s\n", name, marker)
+		}
+	}
+	return tw.Flush()
 }
 
 func addProfileFunc(cmd *cobra.Command, args []string) error {
@@ -121,21 +150,82 @@ func addProfileFunc(cmd *cobra.Command, args []string) error {
 	}
 
 	daemonClient := proto.NewDaemonServiceClient(conn)
-
 	profileName := args[0]
 
-	_, err = daemonClient.AddProfile(cmd.Context(), &proto.AddProfileRequest{
+	resp, err := daemonClient.AddProfile(cmd.Context(), &proto.AddProfileRequest{
 		ProfileName: profileName,
 		Username:    currUser.Username,
 	})
 	if err != nil {
+		return fmt.Errorf("add profile request: %w", err)
+	}
+
+	dupCount, _ := countProfilesWithName(cmd.Context(), daemonClient, currUser.Username, profileName)
+	if dupCount > 1 {
+		cmd.Printf("Warning: %d other profile(s) already use the name %q.\n", dupCount-1, profileName)
+		cmd.Println("Use `netbird profile list --show-id` to disambiguate later.")
+	}
+
+	id := profilemanager.ID(resp.Id)
+	cmd.Printf("Profile added: %s  %s\n", id.ShortID(), profilemanager.StripCtrlChars(profileName))
+	return nil
+
+}
+
+func renameProfileFunc(cmd *cobra.Command, args []string) error {
+	if err := setupCmd(cmd); err != nil {
 		return err
 	}
 
-	cmd.Println("Profile added successfully:", profileName)
+	conn, err := DialClientGRPCServer(cmd.Context(), daemonAddr)
+	if err != nil {
+		return fmt.Errorf("connect to service CLI interface: %w", err)
+	}
+	defer conn.Close()
+
+	currUser, err := user.Current()
+	if err != nil {
+		return fmt.Errorf("get current user: %w", err)
+	}
+
+	daemonClient := proto.NewDaemonServiceClient(conn)
+	handle := args[0]
+	newProfilename := args[1]
+
+	resp, err := daemonClient.RenameProfile(cmd.Context(), &proto.RenameProfileRequest{
+		Handle:         handle,
+		Username:       currUser.Username,
+		NewProfileName: newProfilename,
+	})
+	if err != nil {
+		return wrapAmbiguityError(err, handle)
+	}
+
+	dupCount, _ := countProfilesWithName(cmd.Context(), daemonClient, currUser.Username, newProfilename)
+	if dupCount > 1 {
+		cmd.Printf("Warning: %d other profile(s) already use the name %q.\n", dupCount-1, newProfilename)
+		cmd.Println("Use `netbird profile list --show-id` to disambiguate later.")
+	}
+
+	cmd.Printf("Profile renamed from %s to %s\n", profilemanager.StripCtrlChars(resp.OldProfileName), profilemanager.StripCtrlChars(newProfilename))
+
 	return nil
 }
 
+func countProfilesWithName(ctx context.Context, c proto.DaemonServiceClient, username, name string) (int, error) {
+	resp, err := c.ListProfiles(ctx, &proto.ListProfilesRequest{Username: username})
+	if err != nil {
+		return 0, err
+	}
+	n := 0
+	for _, p := range resp.Profiles {
+		if p.Name == name {
+			n++
+		}
+	}
+	return n, nil
+}
+
 func removeProfileFunc(cmd *cobra.Command, args []string) error {
 	if err := setupCmd(cmd); err != nil {
 		return err
@@ -153,18 +243,17 @@ func removeProfileFunc(cmd *cobra.Command, args []string) error {
 	}
 
 	daemonClient := proto.NewDaemonServiceClient(conn)
+	handle := args[0]
 
-	profileName := args[0]
-
-	_, err = daemonClient.RemoveProfile(cmd.Context(), &proto.RemoveProfileRequest{
-		ProfileName: profileName,
+	resp, err := daemonClient.RemoveProfile(cmd.Context(), &proto.RemoveProfileRequest{
+		ProfileName: handle,
 		Username:    currUser.Username,
 	})
 	if err != nil {
-		return err
+		return wrapAmbiguityError(err, handle)
 	}
 
-	cmd.Println("Profile removed successfully:", profileName)
+	cmd.Printf("Profile removed: %s\n", resp.Id)
 	return nil
 }
 
@@ -174,7 +263,7 @@ func selectProfileFunc(cmd *cobra.Command, args []string) error {
 	}
 
 	profileManager := profilemanager.NewProfileManager()
-	profileName := args[0]
+	handle := args[0]
 
 	currUser, err := user.Current()
 	if err != nil {
@@ -191,32 +280,15 @@ func selectProfileFunc(cmd *cobra.Command, args []string) error {
 
 	daemonClient := proto.NewDaemonServiceClient(conn)
 
-	profiles, err := daemonClient.ListProfiles(ctx, &proto.ListProfilesRequest{
-		Username: currUser.Username,
+	switchResp, err := daemonClient.SwitchProfile(ctx, &proto.SwitchProfileRequest{
+		ProfileName: &handle,
+		Username:    &currUser.Username,
 	})
 	if err != nil {
-		return fmt.Errorf("list profiles: %w", err)
+		return wrapAmbiguityError(err, handle)
 	}
 
-	var profileExists bool
-
-	for _, profile := range profiles.Profiles {
-		if profile.Name == profileName {
-			profileExists = true
-			break
-		}
-	}
-
-	if !profileExists {
-		return fmt.Errorf("profile %s does not exist", profileName)
-	}
-
-	if err := switchProfile(cmd.Context(), profileName, currUser.Username); err != nil {
-		return err
-	}
-
-	err = profileManager.SwitchProfile(profileName)
-	if err != nil {
+	if err := profileManager.SwitchProfile(profilemanager.ID(switchResp.Id)); err != nil {
 		return err
 	}
 
@@ -231,6 +303,30 @@ func selectProfileFunc(cmd *cobra.Command, args []string) error {
 		}
 	}
 
-	cmd.Println("Profile switched successfully to:", profileName)
+	id := profilemanager.ID(switchResp.Id)
+	cmd.Printf("Profile switched to: %s\n", id.ShortID())
 	return nil
 }
+
+// wrapAmbiguityError turns the daemon's gRPC InvalidArgument errors
+// (which carry the resolver's message verbatim) into CLI-friendly text
+// that points the user at --show-id.
+func wrapAmbiguityError(err error, handle string) error {
+	if err == nil {
+		return nil
+	}
+	st, ok := gstatus.FromError(err)
+	if !ok {
+		return err
+	}
+	switch st.Code() {
+	case codes.InvalidArgument:
+		msg := st.Message()
+		if strings.Contains(msg, "ambiguous") {
+			return errors.New(msg + "\nRun `netbird profile list --show-id` to see IDs, then select by ID prefix:\n  netbird profile select|remove <id-prefix>")
+		}
+	case codes.NotFound:
+		return fmt.Errorf("profile %q not found", handle)
+	}
+	return err
+}

client/cmd/root.go

@@ -95,7 +95,9 @@ var (
 	}
 )
 
-// Execute executes the root command.
+// Execute runs the appropriate Cobra command for the CLI.
+// If the process is the update binary it delegates to updateCmd; otherwise it runs the root command.
+// It returns any error produced during command execution.
 func Execute() error {
 	if isUpdateBinary() {
 		return updateCmd.Execute()
@@ -103,6 +105,16 @@ func Execute() error {
 	return rootCmd.Execute()
 }
 
+// init initialises package-level defaults and configures the root
+// Cobra command tree. Sets platform-specific config / log directory
+// paths (including legacy Wiretrustee fallbacks) and a default daemon
+// address; registers persistent CLI flags (daemon address,
+// management / admin URLs, logging, setup key (file and inline,
+// mutually exclusive), preshared key, hostname, anonymise, config
+// path); attaches top-level and nested subcommands to the root
+// command; and registers `up`-specific persistent flags (external IP
+// maps, custom DNS resolver address, Rosenpass options, auto-connect
+// disabling, lazy connection).
 func init() {
 	defaultConfigPathDir = "/etc/netbird/"
 	defaultLogFileDir = "/var/log/netbird/"
@@ -168,10 +180,17 @@ func init() {
 	logCmd.AddCommand(logLevelCmd)
 	debugCmd.AddCommand(forCmd)
 	debugCmd.AddCommand(persistenceCmd)
+	debugCmd.AddCommand(debugConfigCmd)
+
+	// kubernetes commands
+	rootCmd.AddCommand(kubernetesCmd)
+	kubernetesCmd.AddCommand(kubernetesListCmd)
+	kubernetesCmd.AddCommand(kubernetesWriteKubeconfigCmd)
 
 	// profile commands
 	profileCmd.AddCommand(profileListCmd)
 	profileCmd.AddCommand(profileAddCmd)
+	profileCmd.AddCommand(profileRenameCmd)
 	profileCmd.AddCommand(profileRemoveCmd)
 	profileCmd.AddCommand(profileSelectCmd)
 

client/cmd/service_controller.go

@@ -102,7 +102,7 @@ func (p *program) Stop(srv service.Service) error {
 }
 
 // Common setup for service control commands
-func setupServiceControlCommand(cmd *cobra.Command, ctx context.Context, cancel context.CancelFunc) (service.Service, error) {
+func setupServiceControlCommand(cmd *cobra.Command, ctx context.Context, cancel context.CancelFunc, consoleLog bool) (service.Service, error) {
 	// rootCmd env vars are already applied by PersistentPreRunE.
 	SetFlagsFromEnvVars(serviceCmd)
 
@@ -112,8 +112,14 @@ func setupServiceControlCommand(cmd *cobra.Command, ctx context.Context, cancel
 		return nil, err
 	}
 
-	if err := util.InitLog(logLevel, logFiles...); err != nil {
-		return nil, fmt.Errorf("init log: %w", err)
+	if consoleLog {
+		if err := util.InitLog(logLevel, util.LogConsole); err != nil {
+			return nil, fmt.Errorf("init log: %w", err)
+		}
+	} else {
+		if err := util.InitLog(logLevel, logFiles...); err != nil {
+			return nil, fmt.Errorf("init log: %w", err)
+		}
 	}
 
 	cfg, err := newSVCConfig()
@@ -138,7 +144,7 @@ var runCmd = &cobra.Command{
 		SetupCloseHandler(ctx, cancel)
 		SetupDebugHandler(ctx, nil, nil, nil, util.FindFirstLogPath(logFiles))
 
-		s, err := setupServiceControlCommand(cmd, ctx, cancel)
+		s, err := setupServiceControlCommand(cmd, ctx, cancel, false)
 		if err != nil {
 			return err
 		}
@@ -152,7 +158,7 @@ var startCmd = &cobra.Command{
 	Short: "starts NetBird service",
 	RunE: func(cmd *cobra.Command, args []string) error {
 		ctx, cancel := context.WithCancel(cmd.Context())
-		s, err := setupServiceControlCommand(cmd, ctx, cancel)
+		s, err := setupServiceControlCommand(cmd, ctx, cancel, false)
 		if err != nil {
 			return err
 		}
@@ -170,7 +176,7 @@ var stopCmd = &cobra.Command{
 	Short: "stops NetBird service",
 	RunE: func(cmd *cobra.Command, args []string) error {
 		ctx, cancel := context.WithCancel(cmd.Context())
-		s, err := setupServiceControlCommand(cmd, ctx, cancel)
+		s, err := setupServiceControlCommand(cmd, ctx, cancel, false)
 		if err != nil {
 			return err
 		}
@@ -188,7 +194,7 @@ var restartCmd = &cobra.Command{
 	Short: "restarts NetBird service",
 	RunE: func(cmd *cobra.Command, args []string) error {
 		ctx, cancel := context.WithCancel(cmd.Context())
-		s, err := setupServiceControlCommand(cmd, ctx, cancel)
+		s, err := setupServiceControlCommand(cmd, ctx, cancel, false)
 		if err != nil {
 			return err
 		}
@@ -206,7 +212,7 @@ var svcStatusCmd = &cobra.Command{
 	Short: "shows NetBird service status",
 	RunE: func(cmd *cobra.Command, args []string) error {
 		ctx, cancel := context.WithCancel(cmd.Context())
-		s, err := setupServiceControlCommand(cmd, ctx, cancel)
+		s, err := setupServiceControlCommand(cmd, ctx, cancel, true)
 		if err != nil {
 			return err
 		}

client/cmd/status.go

@@ -43,16 +43,16 @@ func init() {
 	ipsFilterMap = make(map[string]struct{})
 	prefixNamesFilterMap = make(map[string]struct{})
 	statusCmd.PersistentFlags().BoolVarP(&detailFlag, "detail", "d", false, "display detailed status information in human-readable format")
-	statusCmd.PersistentFlags().BoolVar(&jsonFlag, "json", false, "display detailed status information in json format")
-	statusCmd.PersistentFlags().BoolVar(&yamlFlag, "yaml", false, "display detailed status information in yaml format")
-	statusCmd.PersistentFlags().BoolVar(&ipv4Flag, "ipv4", false, "display only NetBird IPv4 of this peer, e.g., --ipv4 will output 100.64.0.33")
-	statusCmd.PersistentFlags().BoolVar(&ipv6Flag, "ipv6", false, "display only NetBird IPv6 of this peer")
+	statusCmd.PersistentFlags().BoolVarP(&jsonFlag, "json", "j", false, "display detailed status information in json format")
+	statusCmd.PersistentFlags().BoolVarP(&yamlFlag, "yaml", "y", false, "display detailed status information in yaml format")
+	statusCmd.PersistentFlags().BoolVarP(&ipv4Flag, "ipv4", "4", false, "display only NetBird IPv4 of this peer, e.g., --ipv4 will output 100.64.0.33")
+	statusCmd.PersistentFlags().BoolVarP(&ipv6Flag, "ipv6", "6", false, "display only NetBird IPv6 of this peer")
 	statusCmd.MarkFlagsMutuallyExclusive("detail", "json", "yaml", "ipv4", "ipv6")
-	statusCmd.PersistentFlags().StringSliceVar(&ipsFilter, "filter-by-ips", []string{}, "filters the detailed output by a list of one or more IPs (v4 or v6), e.g., --filter-by-ips 100.64.0.100,fd00::1")
-	statusCmd.PersistentFlags().StringSliceVar(&prefixNamesFilter, "filter-by-names", []string{}, "filters the detailed output by a list of one or more peer FQDN or hostnames, e.g., --filter-by-names peer-a,peer-b.netbird.cloud")
-	statusCmd.PersistentFlags().StringVar(&statusFilter, "filter-by-status", "", "filters the detailed output by connection status(idle|connecting|connected), e.g., --filter-by-status connected")
-	statusCmd.PersistentFlags().StringVar(&connectionTypeFilter, "filter-by-connection-type", "", "filters the detailed output by connection type (P2P|Relayed), e.g., --filter-by-connection-type P2P")
-	statusCmd.PersistentFlags().StringVar(&checkFlag, "check", "", "run a health check and exit with code 0 on success, 1 on failure (live|ready|startup)")
+	statusCmd.PersistentFlags().StringSliceVarP(&ipsFilter, "filter-by-ips", "I", []string{}, "filters the detailed output by a list of one or more IPs (v4 or v6), e.g., --filter-by-ips 100.64.0.100,fd00::1")
+	statusCmd.PersistentFlags().StringSliceVarP(&prefixNamesFilter, "filter-by-names", "N", []string{}, "filters the detailed output by a list of one or more peer FQDN or hostnames, e.g., --filter-by-names peer-a,peer-b.netbird.cloud")
+	statusCmd.PersistentFlags().StringVarP(&statusFilter, "filter-by-status", "S", "", "filters the detailed output by connection status(idle|connecting|connected), e.g., --filter-by-status connected")
+	statusCmd.PersistentFlags().StringVarP(&connectionTypeFilter, "filter-by-connection-type", "T", "", "filters the detailed output by connection type (P2P|Relayed), e.g., --filter-by-connection-type P2P")
+	statusCmd.PersistentFlags().StringVarP(&checkFlag, "check", "C", "", "run a health check and exit with code 0 on success, 1 on failure (live|ready|startup)")
 }
 
 func statusFunc(cmd *cobra.Command, args []string) error {

client/cmd/testutil_test.go

@@ -11,7 +11,7 @@ import (
 	"go.opentelemetry.io/otel"
 	"google.golang.org/grpc"
 
-	"github.com/netbirdio/management-integrations/integrations"
+	"github.com/netbirdio/netbird/management/server/integrations/integrated_validator/validator"
 
 	nbcache "github.com/netbirdio/netbird/management/server/cache"
 
@@ -109,7 +109,7 @@ func startManagement(t *testing.T, config *config.Config, testFile string) (*grp
 		t.Fatal(err)
 	}
 
-	iv, _ := integrations.NewIntegratedValidator(ctx, peersmanager, settingsManagerMock, eventStore, cacheStore)
+	iv, _ := validator.NewIntegratedValidator(ctx, peersmanager, settingsManagerMock, eventStore, cacheStore)
 
 	metrics, err := telemetry.NewDefaultAppMetrics(ctx)
 	require.NoError(t, err)

client/cmd/up.go

@@ -128,13 +128,12 @@ func upFunc(cmd *cobra.Command, args []string) error {
 	var profileSwitched bool
 	// switch profile if provided
 	if profileName != "" {
-		err = switchProfile(cmd.Context(), profileName, username.Username)
+		resolvedID, err := switchProfile(cmd.Context(), profileName, username.Username)
 		if err != nil {
 			return fmt.Errorf("switch profile: %v", err)
 		}
 
-		err = pm.SwitchProfile(profileName)
-		if err != nil {
+		if err := pm.SwitchProfile(resolvedID); err != nil {
 			return fmt.Errorf("switch profile: %v", err)
 		}
 
@@ -190,7 +189,7 @@ func runInForegroundMode(ctx context.Context, cmd *cobra.Command, activeProf *pr
 
 	_, _ = profilemanager.UpdateOldManagementURL(ctx, config, configFilePath)
 
-	err = foregroundLogin(ctx, cmd, config, providedSetupKey, activeProf.Name)
+	err = foregroundLogin(ctx, cmd, config, providedSetupKey, activeProf.ID)
 	if err != nil {
 		return fmt.Errorf("foreground login failed: %v", err)
 	}
@@ -261,10 +260,10 @@ func runInDaemonMode(ctx context.Context, cmd *cobra.Command, pm *profilemanager
 	}
 
 	// set the new config
-	req := setupSetConfigReq(customDNSAddressConverted, cmd, activeProf.Name, username.Username)
+	req := setupSetConfigReq(customDNSAddressConverted, cmd, activeProf.ID.String(), username.Username)
 	if _, err := client.SetConfig(ctx, req); err != nil {
 		if st, ok := gstatus.FromError(err); ok && st.Code() == codes.Unavailable {
-			log.Warnf("setConfig method is not available in the daemon")
+			log.Warnf("setConfig method is not available in the daemon: %s", st.Message())
 		} else {
 			return fmt.Errorf("call service setConfig method: %v", err)
 		}
@@ -289,10 +288,11 @@ func doDaemonUp(ctx context.Context, cmd *cobra.Command, client proto.DaemonServ
 		return fmt.Errorf("setup login request: %v", err)
 	}
 
-	loginRequest.ProfileName = &activeProf.Name
+	profileID := activeProf.ID.String()
+	loginRequest.ProfileName = &profileID
 	loginRequest.Username = &username
 
-	profileState, err := pm.GetProfileState(activeProf.Name)
+	profileState, err := pm.GetProfileState(activeProf.ID)
 	if err != nil {
 		log.Debugf("failed to get profile state for login hint: %v", err)
 	} else if profileState.Email != "" {
@@ -329,7 +329,7 @@ func doDaemonUp(ctx context.Context, cmd *cobra.Command, client proto.DaemonServ
 	}
 
 	if _, err := client.Up(ctx, &proto.UpRequest{
-		ProfileName: &activeProf.Name,
+		ProfileName: &profileID,
 		Username:    &username,
 	}); err != nil {
 		return fmt.Errorf("call service up method: %v", err)

client/cmd/up_daemon_test.go

@@ -29,14 +29,14 @@ func TestUpDaemon(t *testing.T) {
 	}
 
 	sm := profilemanager.ServiceManager{}
-	err = sm.AddProfile("test1", currUser.Username)
+	created, err := sm.AddProfile("test1", currUser.Username)
 	if err != nil {
 		t.Fatalf("failed to add profile: %v", err)
 		return
 	}
 
 	err = sm.SetActiveProfileState(&profilemanager.ActiveProfileState{
-		Name:     "test1",
+		ID:       created.ID,
 		Username: currUser.Username,
 	})
 	if err != nil {

client/cmd/version.go

@@ -12,7 +12,13 @@ var (
 		Short: "Print the NetBird's client application version",
 		Run: func(cmd *cobra.Command, args []string) {
 			cmd.SetOut(cmd.OutOrStdout())
-			cmd.Println(version.NetbirdVersion())
+			out := version.NetbirdVersion()
+			if version.IsDevelopmentVersion(out) {
+				if commit := version.NetbirdCommit(); commit != "" {
+					out += "-" + commit
+				}
+			}
+			cmd.Println(out)
 		},
 	}
 )

client/embed/embed.go

@@ -12,6 +12,7 @@ import (
 	"sync"
 
 	"github.com/sirupsen/logrus"
+	wgdevice "golang.zx2c4.com/wireguard/device"
 	wgnetstack "golang.zx2c4.com/wireguard/tun/netstack"
 
 	"github.com/netbirdio/netbird/client/iface"
@@ -84,6 +85,12 @@ type Options struct {
 	DisableIPv6 bool
 	// BlockInbound blocks all inbound connections from peers
 	BlockInbound bool
+	// BlockLANAccess blocks the embedded peer from reaching the host's
+	// LAN (RFC 1918, link-local, loopback) when it's used as a routing
+	// peer. Mirrors profilemanager.ConfigInput.BlockLANAccess. Useful
+	// when the embedded client must never act as a stepping stone into
+	// the host's local network (e.g. the proxy's overlay peer).
+	BlockLANAccess bool
 	// WireguardPort is the port for the tunnel interface. Use 0 for a random port.
 	WireguardPort *int
 	// MTU is the MTU for the tunnel interface.
@@ -94,6 +101,26 @@ type Options struct {
 	MTU *uint16
 	// DNSLabels defines additional DNS labels configured in the peer.
 	DNSLabels []string
+	// Performance configures the tunnel's buffer pool cap and batch size.
+	Performance Performance
+}
+
+// Performance configures the embedded client's tunnel memory/throughput knobs.
+//
+// These settings are process-global: any non-nil field also becomes the
+// default for Clients constructed by later embed.New calls in the same
+// process. Nil fields are ignored.
+type Performance struct {
+	// PreallocatedBuffersPerPool caps the per-tunnel buffer pool. Zero
+	// leaves the pool unbounded. Lower values trade throughput for a
+	// tighter memory ceiling. May also be changed on a running Client via
+	// Client.SetPerformance, provided this field was nonzero at construction.
+	PreallocatedBuffersPerPool *uint32
+	// MaxBatchSize overrides the number of packets the tunnel reads or
+	// writes per syscall, which also bounds eager buffer allocation per
+	// worker. Zero uses the platform default. Applied at construction
+	// only; ignored by Client.SetPerformance.
+	MaxBatchSize *uint32
 }
 
 // validateCredentials checks that exactly one credential type is provided
@@ -175,6 +202,7 @@ func New(opts Options) (*Client, error) {
 		DisableClientRoutes: &opts.DisableClientRoutes,
 		DisableIPv6:         &opts.DisableIPv6,
 		BlockInbound:        &opts.BlockInbound,
+		BlockLANAccess:      &opts.BlockLANAccess,
 		WireguardPort:       opts.WireguardPort,
 		MTU:                 opts.MTU,
 		DNSLabels:           parsedLabels,
@@ -192,6 +220,13 @@ func New(opts Options) (*Client, error) {
 		config.PrivateKey = opts.PrivateKey
 	}
 
+	if opts.Performance.PreallocatedBuffersPerPool != nil {
+		wgdevice.SetPreallocatedBuffersPerPool(*opts.Performance.PreallocatedBuffersPerPool)
+	}
+	if opts.Performance.MaxBatchSize != nil {
+		wgdevice.SetMaxBatchSizeOverride(*opts.Performance.MaxBatchSize)
+	}
+
 	return &Client{
 		deviceName: opts.DeviceName,
 		setupKey:   opts.SetupKey,
@@ -244,6 +279,10 @@ func (c *Client) Start(startCtx context.Context) error {
 
 	select {
 	case <-startCtx.Done():
+		// Cancel the client context before stopping: Engine.Start blocks on the
+		// signal stream while holding the engine mutex and only unblocks on
+		// cancellation. Stopping first would deadlock on that mutex.
+		cancel()
 		if stopErr := client.Stop(); stopErr != nil {
 			return fmt.Errorf("stop error after context done. Stop error: %w. Context done: %w", stopErr, startCtx.Err())
 		}
@@ -336,7 +375,7 @@ func (c *Client) ListenTCP(address string) (net.Listener, error) {
 	if err != nil {
 		return nil, fmt.Errorf("split host port: %w", err)
 	}
-	listenAddr := fmt.Sprintf("%s:%s", addr, port)
+	listenAddr := net.JoinHostPort(addr.String(), port)
 
 	tcpAddr, err := net.ResolveTCPAddr("tcp", listenAddr)
 	if err != nil {
@@ -357,7 +396,7 @@ func (c *Client) ListenUDP(address string) (net.PacketConn, error) {
 	if err != nil {
 		return nil, fmt.Errorf("split host port: %w", err)
 	}
-	listenAddr := fmt.Sprintf("%s:%s", addr, port)
+	listenAddr := net.JoinHostPort(addr.String(), port)
 
 	udpAddr, err := net.ResolveUDPAddr("udp", listenAddr)
 	if err != nil {
@@ -405,6 +444,21 @@ func (c *Client) Expose(ctx context.Context, req ExposeRequest) (*ExposeSession,
 	}, nil
 }
 
+// IdentityForIP looks up a remote peer by its tunnel IP using the
+// embedded client's status recorder. Returns the peer's WireGuard public
+// key and FQDN. ok=false means the IP doesn't belong to an active peer
+// — offline roster peers are treated as unknown, same as foreign IPs.
+func (c *Client) IdentityForIP(ip netip.Addr) (pubKey, fqdn string, ok bool) {
+	if !ip.IsValid() || c.recorder == nil {
+		return "", "", false
+	}
+	state, found := c.recorder.PeerStateByIP(ip.String())
+	if !found {
+		return "", "", false
+	}
+	return state.PubKey, state.FQDN, true
+}
+
 // Status returns the current status of the client.
 func (c *Client) Status() (peer.FullStatus, error) {
 	c.mu.Lock()
@@ -473,6 +527,25 @@ func (c *Client) VerifySSHHostKey(peerAddress string, key []byte) error {
 	return sshcommon.VerifyHostKey(storedKey, key, peerAddress)
 }
 
+// SetPerformance retunes a running Client. Only PreallocatedBuffersPerPool
+// takes effect, and only when it was nonzero at construction;
+// MaxBatchSize is construction-only and returns an error if set here.
+//
+// Returns ErrClientNotStarted / ErrEngineNotStarted if the Client is not
+// running yet.
+func (c *Client) SetPerformance(t Performance) error {
+	if t.MaxBatchSize != nil {
+		return errors.New("MaxBatchSize is construction-only and cannot be changed at runtime")
+	}
+	engine, err := c.getEngine()
+	if err != nil {
+		return err
+	}
+	return engine.SetPerformance(internal.Performance{
+		PreallocatedBuffersPerPool: t.PreallocatedBuffersPerPool,
+	})
+}
+
 // StartCapture begins capturing packets on this client's tunnel device.
 // Only one capture can be active at a time; starting a new one stops the previous.
 // Call StopCapture (or CaptureSession.Stop) to end it.

client/embed/embed_test.go

@@ -0,0 +1,168 @@
+package embed
+
+import (
+	"context"
+	"net"
+	"testing"
+	"time"
+
+	"github.com/golang/mock/gomock"
+	"github.com/stretchr/testify/require"
+	"google.golang.org/grpc"
+
+	"github.com/netbirdio/netbird/management/internals/controllers/network_map/controller"
+	"github.com/netbirdio/netbird/management/internals/controllers/network_map/update_channel"
+	"github.com/netbirdio/netbird/management/internals/modules/peers"
+	"github.com/netbirdio/netbird/management/internals/modules/peers/ephemeral/manager"
+	"github.com/netbirdio/netbird/management/internals/server/config"
+	nbgrpc "github.com/netbirdio/netbird/management/internals/shared/grpc"
+	mgmt "github.com/netbirdio/netbird/management/server"
+	"github.com/netbirdio/netbird/management/server/activity"
+	nbcache "github.com/netbirdio/netbird/management/server/cache"
+	"github.com/netbirdio/netbird/management/server/groups"
+	"github.com/netbirdio/netbird/management/server/integrations/integrated_validator/validator"
+	"github.com/netbirdio/netbird/management/server/integrations/port_forwarding"
+	"github.com/netbirdio/netbird/management/server/job"
+	"github.com/netbirdio/netbird/management/server/permissions"
+	"github.com/netbirdio/netbird/management/server/settings"
+	"github.com/netbirdio/netbird/management/server/store"
+	"github.com/netbirdio/netbird/management/server/telemetry"
+	"github.com/netbirdio/netbird/management/server/types"
+	mgmtProto "github.com/netbirdio/netbird/shared/management/proto"
+	"github.com/netbirdio/netbird/util"
+)
+
+const testSetupKey = "A2C8E62B-38F5-4553-B31E-DD66C696CEBB"
+
+// TestClientStartTimeoutRollback reproduces a deadlock between Engine.Start and
+// Engine.Stop. The signal endpoint accepts gRPC connections but never serves the
+// SignalExchange service, so Engine.Start parks in WaitStreamConnected while
+// holding the engine mutex. When the Start context expires, the rollback path
+// calls ConnectClient.Stop, which must not block forever acquiring that mutex.
+func TestClientStartTimeoutRollback(t *testing.T) {
+	signalAddr := startBlackholeSignal(t)
+	mgmAddr := startManagement(t, signalAddr)
+
+	wgPort := 0
+	client, err := New(Options{
+		DeviceName:    "embed-rollback-test",
+		SetupKey:      testSetupKey,
+		ManagementURL: "http://" + mgmAddr,
+		WireguardPort: &wgPort,
+	})
+	require.NoError(t, err, "embed client creation must succeed")
+
+	startCtx, cancel := context.WithTimeout(context.Background(), 5*time.Second)
+	defer cancel()
+
+	startErr := make(chan error, 1)
+	go func() {
+		startErr <- client.Start(startCtx)
+	}()
+
+	select {
+	case err := <-startErr:
+		require.ErrorIs(t, err, context.DeadlineExceeded)
+	case <-time.After(60 * time.Second):
+		t.Fatal("client.Start did not return after its context expired: Engine.Stop deadlocked against Engine.Start waiting for the signal stream")
+	}
+}
+
+// startBlackholeSignal starts a gRPC server without the SignalExchange service
+// registered. Connections succeed, but the signal stream can never be
+// established, which keeps Engine.Start parked in WaitStreamConnected.
+func startBlackholeSignal(t *testing.T) string {
+	t.Helper()
+
+	lis, err := net.Listen("tcp", "localhost:0")
+	require.NoError(t, err)
+
+	s := grpc.NewServer()
+	go func() {
+		if err := s.Serve(lis); err != nil {
+			t.Error(err)
+		}
+	}()
+	t.Cleanup(s.Stop)
+
+	return lis.Addr().String()
+}
+
+func startManagement(t *testing.T, signalAddr string) string {
+	t.Helper()
+
+	cfg := &config.Config{
+		Stuns:      []*config.Host{},
+		TURNConfig: &config.TURNConfig{},
+		Relay: &config.Relay{
+			Addresses:      []string{"127.0.0.1:1234"},
+			CredentialsTTL: util.Duration{Duration: time.Hour},
+			Secret:         "222222222222222222",
+		},
+		Signal: &config.Host{
+			Proto: "http",
+			URI:   signalAddr,
+		},
+		Datadir:    t.TempDir(),
+		HttpConfig: nil,
+	}
+
+	lis, err := net.Listen("tcp", "localhost:0")
+	require.NoError(t, err)
+
+	s := grpc.NewServer()
+
+	testStore, cleanUp, err := store.NewTestStoreFromSQL(context.Background(), "../testdata/store.sql", cfg.Datadir)
+	require.NoError(t, err)
+	t.Cleanup(cleanUp)
+
+	eventStore := &activity.InMemoryEventStore{}
+
+	permissionsManager := permissions.NewManager(testStore)
+	peersManager := peers.NewManager(testStore, permissionsManager)
+	jobManager := job.NewJobManager(nil, testStore, peersManager)
+
+	cacheStore, err := nbcache.NewStore(context.Background(), 100*time.Millisecond, 300*time.Millisecond, 100)
+	require.NoError(t, err)
+
+	iv, err := validator.NewIntegratedValidator(context.Background(), peersManager, nil, eventStore, cacheStore)
+	require.NoError(t, err)
+	metrics, err := telemetry.NewDefaultAppMetrics(context.Background())
+	require.NoError(t, err)
+
+	ctrl := gomock.NewController(t)
+	t.Cleanup(ctrl.Finish)
+	settingsMockManager := settings.NewMockManager(ctrl)
+	settingsMockManager.EXPECT().
+		GetSettings(gomock.Any(), gomock.Any(), gomock.Any()).
+		Return(&types.Settings{}, nil).
+		AnyTimes()
+	settingsMockManager.EXPECT().
+		GetExtraSettings(gomock.Any(), gomock.Any()).
+		Return(&types.ExtraSettings{}, nil).
+		AnyTimes()
+
+	groupsManager := groups.NewManagerMock()
+
+	updateManager := update_channel.NewPeersUpdateManager(metrics)
+	requestBuffer := mgmt.NewAccountRequestBuffer(context.Background(), testStore)
+	networkMapController := controller.NewController(context.Background(), testStore, metrics, updateManager, requestBuffer, mgmt.MockIntegratedValidator{}, settingsMockManager, "netbird.selfhosted", port_forwarding.NewControllerMock(), manager.NewEphemeralManager(testStore, peersManager), cfg)
+	accountManager, err := mgmt.BuildManager(context.Background(), cfg, testStore, networkMapController, jobManager, nil, "", eventStore, nil, false, iv, metrics, port_forwarding.NewControllerMock(), settingsMockManager, permissionsManager, false, cacheStore)
+	require.NoError(t, err)
+
+	secretsManager, err := nbgrpc.NewTimeBasedAuthSecretsManager(updateManager, cfg.TURNConfig, cfg.Relay, settingsMockManager, groupsManager)
+	require.NoError(t, err)
+
+	mgmtServer, err := nbgrpc.NewServer(cfg, accountManager, settingsMockManager, jobManager, secretsManager, nil, nil, &mgmt.MockIntegratedValidator{}, networkMapController, nil, nil)
+	require.NoError(t, err)
+	mgmtProto.RegisterManagementServiceServer(s, mgmtServer)
+
+	go func() {
+		if err := s.Serve(lis); err != nil {
+			t.Error(err)
+		}
+	}()
+	t.Cleanup(s.Stop)
+
+	return lis.Addr().String()
+}

client/firewall/iptables/acl_linux.go

@@ -3,6 +3,7 @@ package iptables
 import (
 	"errors"
 	"fmt"
+	"maps"
 	"net"
 	"slices"
 
@@ -421,12 +422,17 @@ func (m *aclManager) updateState() {
 	currentState.Lock()
 	defer currentState.Unlock()
 
+	// Clone the maps so the persisted state holds a private snapshot. The
+	// live maps keep being mutated by subsequent rule operations while the
+	// state manager marshals the state from its periodic-save goroutine.
+	// Sharing them by reference races the two and aborts the process with a
+	// concurrent map iteration and write.
 	if m.v6 {
-		currentState.ACLEntries6 = m.entries
-		currentState.ACLIPsetStore6 = m.ipsetStore
+		currentState.ACLEntries6 = maps.Clone(m.entries)
+		currentState.ACLIPsetStore6 = m.ipsetStore.clone()
 	} else {
-		currentState.ACLEntries = m.entries
-		currentState.ACLIPsetStore = m.ipsetStore
+		currentState.ACLEntries = maps.Clone(m.entries)
+		currentState.ACLIPsetStore = m.ipsetStore.clone()
 	}
 
 	if err := m.stateManager.UpdateState(currentState); err != nil {

client/firewall/iptables/router_linux.go

@@ -4,6 +4,7 @@ package iptables
 
 import (
 	"fmt"
+	"maps"
 	"net/netip"
 	"strconv"
 	"strings"
@@ -749,11 +750,17 @@ func (r *router) updateState() {
 	currentState.Lock()
 	defer currentState.Unlock()
 
+	// Clone the rule map so the persisted state holds a private snapshot. The
+	// live map keeps being mutated by subsequent rule operations while the
+	// state manager marshals the state from its periodic-save goroutine.
+	// Sharing it by reference races the two and aborts the process with a
+	// concurrent map iteration and write. The ipset counter guards itself
+	// during marshaling, so it can be shared directly.
 	if r.v6 {
-		currentState.RouteRules6 = r.rules
+		currentState.RouteRules6 = maps.Clone(r.rules)
 		currentState.RouteIPsetCounter6 = r.ipsetCounter
 	} else {
-		currentState.RouteRules = r.rules
+		currentState.RouteRules = maps.Clone(r.rules)
 		currentState.RouteIPsetCounter = r.ipsetCounter
 	}
 

client/firewall/iptables/rulestore_linux.go

@@ -1,6 +1,9 @@
 package iptables
 
-import "encoding/json"
+import (
+	"encoding/json"
+	"maps"
+)
 
 type ipList struct {
 	ips map[string]struct{}
@@ -19,6 +22,14 @@ func (s *ipList) addIP(ip string) {
 	s.ips[ip] = struct{}{}
 }
 
+// clone returns a deep copy of the ipList with its own ips map.
+func (s *ipList) clone() *ipList {
+	if s == nil {
+		return nil
+	}
+	return &ipList{ips: maps.Clone(s.ips)}
+}
+
 // MarshalJSON implements json.Marshaler
 func (s *ipList) MarshalJSON() ([]byte, error) {
 	return json.Marshal(struct {
@@ -55,6 +66,19 @@ func newIpsetStore() *ipsetStore {
 	}
 }
 
+// clone returns a deep copy of the ipsetStore with its own ipsets map and
+// independent ipList entries.
+func (s *ipsetStore) clone() *ipsetStore {
+	if s == nil {
+		return nil
+	}
+	cloned := &ipsetStore{ipsets: make(map[string]*ipList, len(s.ipsets))}
+	for name, list := range s.ipsets {
+		cloned.ipsets[name] = list.clone()
+	}
+	return cloned
+}
+
 func (s *ipsetStore) ipset(ipsetName string) (*ipList, bool) {
 	r, ok := s.ipsets[ipsetName]
 	return r, ok

client/firewall/nftables/external_chain_monitor_linux.go

@@ -52,9 +52,10 @@ func (m *externalChainMonitor) start() {
 
 	ctx, cancel := context.WithCancel(context.Background())
 	m.cancel = cancel
-	m.done = make(chan struct{})
+	done := make(chan struct{})
+	m.done = done
 
-	go m.run(ctx)
+	go m.run(ctx, done)
 }
 
 func (m *externalChainMonitor) stop() {
@@ -72,8 +73,8 @@ func (m *externalChainMonitor) stop() {
 	<-done
 }
 
-func (m *externalChainMonitor) run(ctx context.Context) {
-	defer close(m.done)
+func (m *externalChainMonitor) run(ctx context.Context, done chan struct{}) {
+	defer close(done)
 
 	bo := &backoff.ExponentialBackOff{
 		InitialInterval:     externalMonitorInitInterval,

client/firewall/uspfilter/forwarder/icmp.go

@@ -362,6 +362,10 @@ func (f *Forwarder) injectICMPv6Reply(id stack.TransportEndpointID, icmpPayload
 		return 0
 	}
 
+	if pc := f.endpoint.capture.Load(); pc != nil {
+		(*pc).Offer(fullPacket, true)
+	}
+
 	return len(fullPacket)
 }
 

client/iface/bind/ice_bind.go

@@ -41,7 +41,6 @@ type ICEBind struct {
 	*wgConn.StdNetBind
 
 	transportNet transport.Net
-	filterFn     udpmux.FilterFn
 	address      wgaddr.Address
 	mtu          uint16
 
@@ -61,12 +60,11 @@ type ICEBind struct {
 	ipv6Conn *net.UDPConn
 }
 
-func NewICEBind(transportNet transport.Net, filterFn udpmux.FilterFn, address wgaddr.Address, mtu uint16) *ICEBind {
+func NewICEBind(transportNet transport.Net, address wgaddr.Address, mtu uint16) *ICEBind {
 	b, _ := wgConn.NewStdNetBind().(*wgConn.StdNetBind)
 	ib := &ICEBind{
 		StdNetBind:       b,
 		transportNet:     transportNet,
-		filterFn:         filterFn,
 		address:          address,
 		mtu:              mtu,
 		endpoints:        make(map[netip.Addr]net.Conn),
@@ -265,7 +263,6 @@ func (s *ICEBind) createOrUpdateMux() {
 		udpmux.UniversalUDPMuxParams{
 			UDPConn:   muxConn,
 			Net:       s.transportNet,
-			FilterFn:  s.filterFn,
 			WGAddress: s.address,
 			MTU:       s.mtu,
 		},

client/iface/bind/ice_bind_test.go

@@ -289,7 +289,7 @@ func setupICEBind(t *testing.T) *ICEBind {
 		IP:      netip.MustParseAddr("100.64.0.1"),
 		Network: netip.MustParsePrefix("100.64.0.0/10"),
 	}
-	return NewICEBind(transportNet, nil, address, 1280)
+	return NewICEBind(transportNet, address, 1280)
 }
 
 func createDualStackConns(t *testing.T) (*net.UDPConn, *net.UDPConn) {

client/iface/device/device_filter.go

@@ -1,10 +1,13 @@
 package device
 
 import (
+	"fmt"
 	"net/netip"
+	"runtime/debug"
 	"sync"
 	"sync/atomic"
 
+	log "github.com/sirupsen/logrus"
 	"golang.zx2c4.com/wireguard/tun"
 )
 
@@ -41,10 +44,13 @@ type PacketCapture interface {
 type FilteredDevice struct {
 	tun.Device
 
-	filter    PacketFilter
-	capture   atomic.Pointer[PacketCapture]
-	mutex     sync.RWMutex
-	closeOnce sync.Once
+	filter  PacketFilter
+	capture atomic.Pointer[PacketCapture]
+	// panicHandler is invoked after a panic in the underlying device is
+	// recovered in Read or Write.
+	panicHandler atomic.Pointer[func()]
+	mutex        sync.RWMutex
+	closeOnce    sync.Once
 }
 
 // newDeviceFilter constructor function
@@ -70,7 +76,7 @@ func (d *FilteredDevice) Close() error {
 
 // Read wraps read method with filtering feature
 func (d *FilteredDevice) Read(bufs [][]byte, sizes []int, offset int) (n int, err error) {
-	if n, err = d.Device.Read(bufs, sizes, offset); err != nil {
+	if n, err = d.deviceRead(bufs, sizes, offset); err != nil {
 		return 0, err
 	}
 
@@ -112,7 +118,7 @@ func (d *FilteredDevice) Write(bufs [][]byte, offset int) (int, error) {
 	d.mutex.RUnlock()
 
 	if filter == nil {
-		return d.Device.Write(bufs, offset)
+		return d.deviceWrite(bufs, offset)
 	}
 
 	filteredBufs := make([][]byte, 0, len(bufs))
@@ -125,9 +131,44 @@ func (d *FilteredDevice) Write(bufs [][]byte, offset int) (int, error) {
 		}
 	}
 
-	n, err := d.Device.Write(filteredBufs, offset)
-	n += dropped
-	return n, err
+	n, err := d.deviceWrite(filteredBufs, offset)
+	if err != nil {
+		return n, err
+	}
+	return n + dropped, nil
+}
+
+// deviceRead calls the underlying device Read, recovering from panics in the
+// wintun read path and converting them into errors.
+func (d *FilteredDevice) deviceRead(bufs [][]byte, sizes []int, offset int) (n int, err error) {
+	defer d.recoverFromPanic("read", &n, &err)
+	return d.Device.Read(bufs, sizes, offset)
+}
+
+// deviceWrite calls the underlying device Write, recovering from panics in the
+// wintun write path and converting them into errors.
+func (d *FilteredDevice) deviceWrite(bufs [][]byte, offset int) (n int, err error) {
+	defer d.recoverFromPanic("write", &n, &err)
+	return d.Device.Write(bufs, offset)
+}
+
+// recoverFromPanic converts a panic in the underlying device into a regular
+// error and invokes the registered panic handler. The wintun read path is
+// known to panic on zero-length packets that third-party filter drivers can
+// place in the ring.
+func (d *FilteredDevice) recoverFromPanic(op string, n *int, err *error) {
+	r := recover()
+	if r == nil {
+		return
+	}
+
+	log.Errorf("recovered panic in tun device %s: %v\n%s", op, r, debug.Stack())
+	*n = 0
+	*err = fmt.Errorf("tun device %s panic: %v", op, r)
+
+	if handler := d.panicHandler.Load(); handler != nil {
+		(*handler)()
+	}
 }
 
 // SetFilter sets packet filter to device
@@ -137,6 +178,17 @@ func (d *FilteredDevice) SetFilter(filter PacketFilter) {
 	d.mutex.Unlock()
 }
 
+// SetPanicHandler registers a handler invoked after a recovered panic in Read
+// or Write. The device is unusable after such a panic; the handler should
+// trigger recreation of the interface. Pass nil to remove.
+func (d *FilteredDevice) SetPanicHandler(handler func()) {
+	if handler == nil {
+		d.panicHandler.Store(nil)
+		return
+	}
+	d.panicHandler.Store(&handler)
+}
+
 // SetCapture sets or clears the packet capture sink. Pass nil to disable.
 // Uses atomic store so the hot path (Read/Write) is a single pointer load
 // with no locking overhead when capture is off.

client/iface/device/device_filter_test.go

@@ -221,3 +221,60 @@ func TestDeviceWrapperRead(t *testing.T) {
 		}
 	})
 }
+
+func TestDeviceWrapperReadPanic(t *testing.T) {
+	ctrl := gomock.NewController(t)
+	defer ctrl.Finish()
+
+	tun := mocks.NewMockDevice(ctrl)
+	tun.EXPECT().Read(gomock.Any(), gomock.Any(), gomock.Any()).
+		DoAndReturn(func(bufs [][]byte, sizes []int, offset int) (int, error) {
+			// Reproduce the wintun zero-length packet panic (index out of range).
+			packet := make([]byte, 0)
+			return int(packet[0]), nil
+		})
+
+	wrapped := newDeviceFilter(tun)
+
+	handlerCalled := false
+	wrapped.SetPanicHandler(func() { handlerCalled = true })
+
+	n, err := wrapped.Read([][]byte{{}}, []int{0}, 0)
+	if err == nil {
+		t.Errorf("expected error from recovered panic, got nil")
+	}
+	if n != 0 {
+		t.Errorf("expected n=0, got %d", n)
+	}
+	if !handlerCalled {
+		t.Errorf("expected panic handler to be called")
+	}
+}
+
+func TestDeviceWrapperWritePanic(t *testing.T) {
+	ctrl := gomock.NewController(t)
+	defer ctrl.Finish()
+
+	tun := mocks.NewMockDevice(ctrl)
+	tun.EXPECT().Write(gomock.Any(), gomock.Any()).
+		DoAndReturn(func(bufs [][]byte, offset int) (int, error) {
+			packet := make([]byte, 0)
+			return int(packet[0]), nil
+		})
+
+	wrapped := newDeviceFilter(tun)
+
+	handlerCalled := false
+	wrapped.SetPanicHandler(func() { handlerCalled = true })
+
+	n, err := wrapped.Write([][]byte{{0x45, 0x00}}, 0)
+	if err == nil {
+		t.Errorf("expected error from recovered panic, got nil")
+	}
+	if n != 0 {
+		t.Errorf("expected n=0, got %d", n)
+	}
+	if !handlerCalled {
+		t.Errorf("expected panic handler to be called")
+	}
+}

client/iface/device/device_kernel_unix.go

@@ -32,8 +32,6 @@ type TunKernelDevice struct {
 	link       *wgLink
 	udpMuxConn net.PacketConn
 	udpMux     *udpmux.UniversalUDPMuxDefault
-
-	filterFn udpmux.FilterFn
 }
 
 func NewKernelDevice(name string, address wgaddr.Address, wgPort int, key string, mtu uint16, transportNet transport.Net) *TunKernelDevice {
@@ -104,7 +102,6 @@ func (t *TunKernelDevice) Up() (*udpmux.UniversalUDPMuxDefault, error) {
 	bindParams := udpmux.UniversalUDPMuxParams{
 		UDPConn:   nbnet.WrapPacketConn(rawSock),
 		Net:       t.transportNet,
-		FilterFn:  t.filterFn,
 		WGAddress: t.address,
 		MTU:       t.mtu,
 	}

client/iface/iface.go

@@ -63,7 +63,6 @@ type WGIFaceOpts struct {
 	MTU          uint16
 	MobileArgs   *device.MobileIFaceArguments
 	TransportNet transport.Net
-	FilterFn     udpmux.FilterFn
 	DisableDNS   bool
 }
 

client/iface/iface_new.go

@@ -11,7 +11,7 @@ import (
 
 // NewWGIFace Creates a new WireGuard interface instance
 func NewWGIFace(opts WGIFaceOpts) (*WGIface, error) {
-	iceBind := bind.NewICEBind(opts.TransportNet, opts.FilterFn, opts.Address, opts.MTU)
+	iceBind := bind.NewICEBind(opts.TransportNet, opts.Address, opts.MTU)
 
 	var tun WGTunDevice
 	if netstack.IsEnabled() {

client/iface/iface_new_android.go

@@ -9,7 +9,7 @@ import (
 
 // NewWGIFace Creates a new WireGuard interface instance
 func NewWGIFace(opts WGIFaceOpts) (*WGIface, error) {
-	iceBind := bind.NewICEBind(opts.TransportNet, opts.FilterFn, opts.Address, opts.MTU)
+	iceBind := bind.NewICEBind(opts.TransportNet, opts.Address, opts.MTU)
 
 	if netstack.IsEnabled() {
 		wgIFace := &WGIface{

client/iface/iface_new_ios.go

@@ -10,7 +10,7 @@ import (
 
 // NewWGIFace Creates a new WireGuard interface instance
 func NewWGIFace(opts WGIFaceOpts) (*WGIface, error) {
-	iceBind := bind.NewICEBind(opts.TransportNet, opts.FilterFn, opts.Address, opts.MTU)
+	iceBind := bind.NewICEBind(opts.TransportNet, opts.Address, opts.MTU)
 
 	wgIFace := &WGIface{
 		tun:            device.NewTunDevice(opts.IFaceName, opts.Address, opts.WGPort, opts.WGPrivKey, opts.MTU, iceBind, opts.MobileArgs.TunFd),

client/iface/iface_new_linux.go

@@ -14,7 +14,7 @@ import (
 // NewWGIFace Creates a new WireGuard interface instance
 func NewWGIFace(opts WGIFaceOpts) (*WGIface, error) {
 	if netstack.IsEnabled() {
-		iceBind := bind.NewICEBind(opts.TransportNet, opts.FilterFn, opts.Address, opts.MTU)
+		iceBind := bind.NewICEBind(opts.TransportNet, opts.Address, opts.MTU)
 		return &WGIface{
 			tun:            device.NewNetstackDevice(opts.IFaceName, opts.Address, opts.WGPort, opts.WGPrivKey, opts.MTU, iceBind, netstack.ListenAddr()),
 			userspaceBind:  true,
@@ -30,7 +30,7 @@ func NewWGIFace(opts WGIFaceOpts) (*WGIface, error) {
 	}
 
 	if device.ModuleTunIsLoaded() {
-		iceBind := bind.NewICEBind(opts.TransportNet, opts.FilterFn, opts.Address, opts.MTU)
+		iceBind := bind.NewICEBind(opts.TransportNet, opts.Address, opts.MTU)
 		return &WGIface{
 			tun:            device.NewTunDevice(opts.IFaceName, opts.Address, opts.WGPort, opts.WGPrivKey, opts.MTU, iceBind),
 			userspaceBind:  true,

client/iface/udpmux/universal.go

@@ -8,8 +8,6 @@ import (
 	"context"
 	"fmt"
 	"net"
-	"net/netip"
-	"sync"
 	"time"
 
 	log "github.com/sirupsen/logrus"
@@ -22,10 +20,6 @@ import (
 	"github.com/netbirdio/netbird/client/iface/wgaddr"
 )
 
-// FilterFn is a function that filters out candidates based on the address.
-// If it returns true, the address is to be filtered. It also returns the prefix of matching route.
-type FilterFn func(address netip.Addr) (bool, netip.Prefix, error)
-
 // UniversalUDPMuxDefault handles STUN and TURN servers packets by wrapping the original UDPConn
 // It then passes packets to the UDPMux that does the actual connection muxing.
 type UniversalUDPMuxDefault struct {
@@ -43,7 +37,6 @@ type UniversalUDPMuxParams struct {
 	UDPConn               net.PacketConn
 	XORMappedAddrCacheTTL time.Duration
 	Net                   transport.Net
-	FilterFn              FilterFn
 	WGAddress             wgaddr.Address
 	MTU                   uint16
 }
@@ -68,7 +61,6 @@ func NewUniversalUDPMuxDefault(params UniversalUDPMuxParams) *UniversalUDPMuxDef
 		PacketConn: params.UDPConn,
 		mux:        m,
 		logger:     params.Logger,
-		filterFn:   params.FilterFn,
 		address:    params.WGAddress,
 	}
 
@@ -115,15 +107,12 @@ func (m *UniversalUDPMuxDefault) ReadFromConn(ctx context.Context) {
 	}
 }
 
-// UDPConn is a wrapper around UDPMux conn that overrides ReadFrom and handles STUN/TURN packets
+// UDPConn is a wrapper around UDPMux conn that overrides WriteTo to drop packets destined for the overlay subnet.
 type UDPConn struct {
 	net.PacketConn
-	mux      *UniversalUDPMuxDefault
-	logger   logging.LeveledLogger
-	filterFn FilterFn
-	// TODO: reset cache on route changes
-	addrCache sync.Map
-	address   wgaddr.Address
+	mux     *UniversalUDPMuxDefault
+	logger  logging.LeveledLogger
+	address wgaddr.Address
 }
 
 // GetPacketConn returns the underlying PacketConn
@@ -132,65 +121,16 @@ func (u *UDPConn) GetPacketConn() net.PacketConn {
 }
 
 func (u *UDPConn) WriteTo(b []byte, addr net.Addr) (int, error) {
-	if u.filterFn == nil {
+	udpAddr, ok := addr.(*net.UDPAddr)
+	if !ok {
 		return u.PacketConn.WriteTo(b, addr)
 	}
-
-	if isRouted, found := u.addrCache.Load(addr.String()); found {
-		return u.handleCachedAddress(isRouted.(bool), b, addr)
-	}
-
-	return u.handleUncachedAddress(b, addr)
-}
-
-func (u *UDPConn) handleCachedAddress(isRouted bool, b []byte, addr net.Addr) (int, error) {
-	if isRouted {
-		return 0, fmt.Errorf("address %s is part of a routed network, refusing to write", addr)
-	}
-	return u.PacketConn.WriteTo(b, addr)
-}
-
-func (u *UDPConn) handleUncachedAddress(b []byte, addr net.Addr) (int, error) {
-	if err := u.performFilterCheck(addr); err != nil {
-		return 0, err
-	}
-	return u.PacketConn.WriteTo(b, addr)
-}
-
-func (u *UDPConn) performFilterCheck(addr net.Addr) error {
-	host, err := getHostFromAddr(addr)
-	if err != nil {
-		log.Errorf("Failed to get host from address %s: %v", addr, err)
-		return nil
-	}
-
-	a, err := netip.ParseAddr(host)
-	if err != nil {
-		log.Errorf("Failed to parse address %s: %v", addr, err)
-		return nil
-	}
-
-	if u.address.Network.Contains(a) {
+	dst := udpAddr.AddrPort().Addr().Unmap()
+	if (u.address.Network.IsValid() && u.address.Network.Contains(dst)) || (u.address.IPv6Net.IsValid() && u.address.IPv6Net.Contains(dst)) {
 		log.Warnf("address %s is part of the NetBird network %s, refusing to write", addr, u.address)
-		return fmt.Errorf("address %s is part of the NetBird network %s, refusing to write", addr, u.address)
+		return 0, fmt.Errorf("address %s is part of the NetBird network %s, refusing to write", addr, u.address)
 	}
-
-	if isRouted, prefix, err := u.filterFn(a); err != nil {
-		log.Errorf("Failed to check if address %s is routed: %v", addr, err)
-	} else {
-		u.addrCache.Store(addr.String(), isRouted)
-		if isRouted {
-			// Extra log, as the error only shows up with ICE logging enabled
-			log.Infof("address %s is part of routed network %s, refusing to write", addr, prefix)
-			return fmt.Errorf("address %s is part of routed network %s, refusing to write", addr, prefix)
-		}
-	}
-	return nil
-}
-
-func getHostFromAddr(addr net.Addr) (string, error) {
-	host, _, err := net.SplitHostPort(addr.String())
-	return host, err
+	return u.PacketConn.WriteTo(b, addr)
 }
 
 // GetSharedConn returns the shared udp conn
@@ -225,6 +165,13 @@ func (m *UniversalUDPMuxDefault) HandleSTUNMessage(msg *stun.Message, addr net.A
 		return nil
 	}
 
+	src := udpAddr.AddrPort().Addr().Unmap()
+	wg := m.params.WGAddress
+	if (wg.Network.IsValid() && wg.Network.Contains(src)) || (wg.IPv6Net.IsValid() && wg.IPv6Net.Contains(src)) {
+		log.Debugf("dropping STUN message from overlay source %s", udpAddr)
+		return nil
+	}
+
 	if m.isXORMappedResponse(msg, udpAddr.String()) {
 		err := m.handleXORMappedResponse(udpAddr, msg)
 		if err != nil {

client/iface/wgproxy/proxy_linux_test.go

@@ -66,7 +66,7 @@ func seedProxyForProxyCloseByRemoteConn() ([]proxyInstance, error) {
 	if err != nil {
 		return nil, err
 	}
-	iceBind := bind.NewICEBind(nil, nil, wgAddress, 1280)
+	iceBind := bind.NewICEBind(nil, wgAddress, 1280)
 	endpointAddress := &net.UDPAddr{
 		IP:   net.IPv4(10, 0, 0, 1),
 		Port: 1234,

client/iface/wgproxy/proxy_seed_test.go

@@ -22,7 +22,7 @@ func seedProxyForProxyCloseByRemoteConn() ([]proxyInstance, error) {
 	if err != nil {
 		return nil, err
 	}
-	iceBind := bind.NewICEBind(nil, nil, wgAddress, 1280)
+	iceBind := bind.NewICEBind(nil, wgAddress, 1280)
 	endpointAddress := &net.UDPAddr{
 		IP:   net.IPv4(10, 0, 0, 1),
 		Port: 1234,

client/internal/auth/pkce_flow.go

@@ -360,7 +360,13 @@ func isRedirectURLPortUsed(redirectURL string, excludedRanges []excludedPortRang
 		return true
 	}
 
-	addr := fmt.Sprintf(":%s", port)
+	// FreeBSD 15 disables connecting to INADDR_ANY (0.0.0.0) as a localhost
+	// alias by default, ensure explicit ip for localhost.
+	host := parsedURL.Hostname()
+	if host == "" {
+		host = "127.0.0.1"
+	}
+	addr := net.JoinHostPort(host, port)
 	conn, err := net.DialTimeout("tcp", addr, 3*time.Second)
 	if err != nil {
 		return false

client/internal/connect.go

@@ -6,6 +6,7 @@ import (
 	"fmt"
 	"net"
 	"net/netip"
+	"path/filepath"
 	"runtime"
 	"runtime/debug"
 	"strings"
@@ -117,6 +118,8 @@ func (c *ConnectClient) RunOniOS(
 	networkChangeListener listener.NetworkChangeListener,
 	dnsManager dns.IosDnsManager,
 	stateFilePath string,
+	cacheDir string,
+	logFilePath string,
 ) error {
 	// Set GC percent to 5% to reduce memory usage as iOS only allows 50MB of memory for the extension.
 	debug.SetGCPercent(5)
@@ -126,8 +129,9 @@ func (c *ConnectClient) RunOniOS(
 		NetworkChangeListener: networkChangeListener,
 		DnsManager:            dnsManager,
 		StateFilePath:         stateFilePath,
+		TempDir:               cacheDir,
 	}
-	return c.run(mobileDependency, nil, "")
+	return c.run(mobileDependency, nil, logFilePath)
 }
 
 func (c *ConnectClient) run(mobileDependency MobileDependency, runningChan chan struct{}, logPath string) error {
@@ -346,6 +350,11 @@ func (c *ConnectClient) run(mobileDependency MobileDependency, runningChan chan
 			return wrapErr(err)
 		}
 		engineConfig.TempDir = mobileDependency.TempDir
+		// Leave StateDir empty when there is no state path so a disk-backed
+		// syncstore falls back to os.TempDir() instead of filepath.Dir("") == ".".
+		if path != "" {
+			engineConfig.StateDir = filepath.Dir(path)
+		}
 
 		relayManager := relayClient.NewManager(engineCtx, relayURLs, myPrivateKey.PublicKey().String(), engineConfig.MTU)
 		c.statusRecorder.SetRelayMgr(relayManager)

client/internal/debug/debug.go

@@ -45,8 +45,11 @@ netbird.out: Most recent, anonymized stdout log file of the NetBird client.
 routes.txt: Detailed system routing table in tabular format including destination, gateway, interface, metrics, and protocol information, if --system-info flag was provided.
 interfaces.txt: Anonymized network interface information, if --system-info flag was provided.
 ip_rules.txt: Detailed IP routing rules in tabular format including priority, source, destination, interfaces, table, and action information (Linux only), if --system-info flag was provided.
-iptables.txt: Anonymized iptables rules with packet counters, if --system-info flag was provided.
-nftables.txt: Anonymized nftables rules with packet counters, if --system-info flag was provided.
+iptables.txt: Anonymized iptables (IPv4) rules with packet counters, if --system-info flag was provided.
+ip6tables.txt: Anonymized ip6tables (IPv6) rules with packet counters, if --system-info flag was provided.
+ipset.txt: Anonymized ipset list output, if --system-info flag was provided.
+nftables.txt: Anonymized nftables rules with packet counters across all families (ip, ip6, inet, etc.), if --system-info flag was provided.
+sysctls.txt: Forwarding, reverse-path filter, source-validation, and conntrack accounting sysctl values that the NetBird client may read or modify, if --system-info flag was provided (Linux only).
 resolv.conf: DNS resolver configuration from /etc/resolv.conf (Unix systems only), if --system-info flag was provided.
 scutil_dns.txt: DNS configuration from scutil --dns (macOS only), if --system-info flag was provided.
 resolved_domains.txt: Anonymized resolved domain IP addresses from the status recorder.
@@ -165,22 +168,33 @@ The config.txt file contains anonymized configuration information of the NetBird
 Other non-sensitive configuration options are included without anonymization.
 
 Firewall Rules (Linux only)
-The bundle includes two separate firewall rule files:
+The bundle includes the following firewall-related files:
 
 iptables.txt:
-- Complete iptables ruleset with packet counters using 'iptables -v -n -L'
+- IPv4 iptables ruleset with packet counters using 'iptables-save' and 'iptables -v -n -L'
 - Includes all tables (filter, nat, mangle, raw, security)
 - Shows packet and byte counters for each rule
 - All IP addresses are anonymized
 - Chain names, table names, and other non-sensitive information remain unchanged
 
+ip6tables.txt:
+- IPv6 ip6tables ruleset with packet counters using 'ip6tables-save' and 'ip6tables -v -n -L'
+- Same table coverage and anonymization as iptables.txt
+- Omitted when ip6tables is not installed or no IPv6 rules are present
+
+ipset.txt:
+- Output of 'ipset list' (family-agnostic)
+- IP addresses are anonymized; set names and types remain unchanged
+
 nftables.txt:
-- Complete nftables ruleset obtained via 'nft -a list ruleset'
+- Complete nftables ruleset across all families (ip, ip6, inet, arp, bridge, netdev) via 'nft -a list ruleset'
 - Includes rule handle numbers and packet counters
-- All tables, chains, and rules are included
-- Shows packet and byte counters for each rule
-- All IP addresses are anonymized
-- Chain names, table names, and other non-sensitive information remain unchanged
+- All IP addresses are anonymized; chain/table names remain unchanged
+
+sysctls.txt:
+- Forwarding (IPv4 + IPv6, global and per-interface), reverse-path filter, source-validation, conntrack accounting, and TCP-related sysctls that netbird may read or modify
+- Per-interface keys are enumerated from /proc/sys/net/ipv{4,6}/conf
+- Interface names anonymized when --anonymize is set
 
 IP Rules (Linux only)
 The ip_rules.txt file contains detailed IP routing rule information:
@@ -236,10 +250,13 @@ type BundleGenerator struct {
 	syncResponse   *mgmProto.SyncResponse
 	logPath        string
 	tempDir        string
+	statePath      string
 	cpuProfile     []byte
 	capturePath    string
 	refreshStatus  func() // Optional callback to refresh status before bundle generation
 	clientMetrics  MetricsExporter
+	daemonVersion  string
+	cliVersion     string
 
 	anonymize         bool
 	includeSystemInfo bool
@@ -260,10 +277,13 @@ type GeneratorDependencies struct {
 	SyncResponse   *mgmProto.SyncResponse
 	LogPath        string
 	TempDir        string // Directory for temporary bundle zip files. If empty, os.TempDir() is used.
+	StatePath      string // Path to the state file. If empty, the ServiceManager default path is used.
 	CPUProfile     []byte
 	CapturePath    string
 	RefreshStatus  func()
 	ClientMetrics  MetricsExporter
+	DaemonVersion  string
+	CliVersion     string
 }
 
 func NewBundleGenerator(deps GeneratorDependencies, cfg BundleConfig) *BundleGenerator {
@@ -281,10 +301,13 @@ func NewBundleGenerator(deps GeneratorDependencies, cfg BundleConfig) *BundleGen
 		syncResponse:   deps.SyncResponse,
 		logPath:        deps.LogPath,
 		tempDir:        deps.TempDir,
+		statePath:      deps.StatePath,
 		cpuProfile:     deps.CPUProfile,
 		capturePath:    deps.CapturePath,
 		refreshStatus:  deps.RefreshStatus,
 		clientMetrics:  deps.ClientMetrics,
+		daemonVersion:  deps.DaemonVersion,
+		cliVersion:     deps.CliVersion,
 
 		anonymize:         cfg.Anonymize,
 		includeSystemInfo: cfg.IncludeSystemInfo,
@@ -412,6 +435,10 @@ func (g *BundleGenerator) addSystemInfo() {
 		log.Errorf("failed to add firewall rules to debug bundle: %v", err)
 	}
 
+	if err := g.addSysctls(); err != nil {
+		log.Errorf("failed to add sysctls to debug bundle: %v", err)
+	}
+
 	if err := g.addDNSInfo(); err != nil {
 		log.Errorf("failed to add DNS info to debug bundle: %v", err)
 	}
@@ -441,9 +468,11 @@ func (g *BundleGenerator) addStatus() error {
 		protoFullStatus := nbstatus.ToProtoFullStatus(fullStatus)
 		protoFullStatus.Events = g.statusRecorder.GetEventHistory()
 		overview := nbstatus.ConvertToStatusOutputOverview(protoFullStatus, nbstatus.ConvertOptions{
-			Anonymize:   g.anonymize,
-			ProfileName: profName,
+			Anonymize:     g.anonymize,
+			ProfileName:   profName,
+			DaemonVersion: g.daemonVersion,
 		})
+		overview.CliVersion = g.cliVersion
 		statusOutput := overview.FullDetailSummary()
 
 		statusReader := strings.NewReader(statusOutput)
@@ -490,6 +519,14 @@ func (g *BundleGenerator) addConfig() error {
 		}
 	}
 
+	// Surface the set of MDM-enforced keys so a support engineer reading
+	// the bundle can tell which field values are user-set vs MDM-overridden.
+	// Same semantics as the mDMManagedFields list returned by the
+	// GetConfig RPC consumed by `netbird debug config`.
+	if managed := g.internalConfig.Policy().ManagedKeys(); len(managed) > 0 {
+		configContent.WriteString(fmt.Sprintf("MDMManagedFields: %v\n", managed))
+	}
+
 	configReader := strings.NewReader(configContent.String())
 	if err := g.addFileToZip(configReader, "config.txt"); err != nil {
 		return fmt.Errorf("add config file to zip: %w", err)
@@ -780,6 +817,8 @@ func (g *BundleGenerator) addSyncResponse() error {
 		AllowPartial:    true,
 	}
 
+	g.maskSecrets()
+
 	jsonBytes, err := options.Marshal(g.syncResponse)
 	if err != nil {
 		return fmt.Errorf("generate json: %w", err)
@@ -792,9 +831,33 @@ func (g *BundleGenerator) addSyncResponse() error {
 	return nil
 }
 
+func (g *BundleGenerator) maskSecrets() {
+	if g.syncResponse == nil || g.syncResponse.NetbirdConfig == nil {
+		return
+	}
+
+	if g.syncResponse.NetbirdConfig.Flow != nil {
+		g.syncResponse.NetbirdConfig.Flow.TokenPayload = maskedValue
+
+	}
+
+	if g.syncResponse.NetbirdConfig.Relay != nil {
+		g.syncResponse.NetbirdConfig.Relay.TokenPayload = maskedValue
+	}
+
+	for i := range g.syncResponse.NetbirdConfig.Turns {
+		if g.syncResponse.NetbirdConfig.Turns[i] != nil {
+			g.syncResponse.NetbirdConfig.Turns[i].Password = maskedValue
+		}
+	}
+}
+
 func (g *BundleGenerator) addStateFile() error {
-	sm := profilemanager.NewServiceManager("")
-	path := sm.GetStatePath()
+	path := g.statePath
+	if path == "" {
+		sm := profilemanager.NewServiceManager("")
+		path = sm.GetStatePath()
+	}
 	if path == "" {
 		return nil
 	}
@@ -1021,7 +1084,8 @@ func (g *BundleGenerator) addRotatedLogFiles(logDir string) {
 		return
 	}
 
-	pattern := filepath.Join(logDir, "client-*.log.gz")
+	// This regex will match both logs rotated by us and logrotate on linux
+	pattern := filepath.Join(logDir, "client*.log.*")
 	files, err := filepath.Glob(pattern)
 	if err != nil {
 		log.Warnf("failed to glob rotated logs: %v", err)
@@ -1054,7 +1118,12 @@ func (g *BundleGenerator) addRotatedLogFiles(logDir string) {
 
 	for i := 0; i < maxFiles; i++ {
 		name := filepath.Base(files[i])
-		if err := g.addSingleLogFileGz(files[i], name); err != nil {
+		if strings.HasSuffix(name, ".gz") {
+			err = g.addSingleLogFileGz(files[i], name)
+		} else {
+			err = g.addSingleLogfile(files[i], name)
+		}
+		if err != nil {
 			log.Warnf("failed to add rotated log %s: %v", name, err)
 		}
 	}

client/internal/debug/debug_ios.go

@@ -0,0 +1,36 @@
+//go:build ios
+
+package debug
+
+import (
+	"path/filepath"
+
+	log "github.com/sirupsen/logrus"
+)
+
+// swiftLogFile is the Swift app log written by the iOS app into the same log
+// directory as the Go client log, so it can be collected into the bundle.
+const swiftLogFile = "swift-log.log"
+
+// addPlatformLog collects logs for the iOS debug bundle. iOS has no logcat or
+// systemd journal, so we rely on file-based logs. addLogfile handles the Go
+// client log (logPath) with rotation, the stderr/stdout companions and
+// anonymization. The iOS app writes its own Swift log into the same directory,
+// so we add it alongside the Go log.
+func (g *BundleGenerator) addPlatformLog() error {
+	if err := g.addLogfile(); err != nil {
+		return err
+	}
+
+	if g.logPath == "" {
+		return nil
+	}
+
+	swiftLogPath := filepath.Join(filepath.Dir(g.logPath), swiftLogFile)
+	if err := g.addSingleLogfile(swiftLogPath, swiftLogFile); err != nil {
+		// The Swift log is best-effort: the app may not have written it yet.
+		log.Warnf("failed to add %s to debug bundle: %v", swiftLogFile, err)
+	}
+
+	return nil
+}

client/internal/debug/debug_linux.go

@@ -124,15 +124,18 @@ func getSystemdLogs(serviceName string) (string, error) {
 // addFirewallRules collects and adds firewall rules to the archive
 func (g *BundleGenerator) addFirewallRules() error {
 	log.Info("Collecting firewall rules")
-	iptablesRules, err := collectIPTablesRules()
+	g.addIPTablesRulesToBundle("iptables-save", "iptables", "iptables.txt")
+	g.addIPTablesRulesToBundle("ip6tables-save", "ip6tables", "ip6tables.txt")
+
+	ipsetOutput, err := collectIPSets()
 	if err != nil {
-		log.Warnf("Failed to collect iptables rules: %v", err)
+		log.Warnf("Failed to collect ipset information: %v", err)
 	} else {
 		if g.anonymize {
-			iptablesRules = g.anonymizer.AnonymizeString(iptablesRules)
+			ipsetOutput = g.anonymizer.AnonymizeString(ipsetOutput)
 		}
-		if err := g.addFileToZip(strings.NewReader(iptablesRules), "iptables.txt"); err != nil {
-			log.Warnf("Failed to add iptables rules to bundle: %v", err)
+		if err := g.addFileToZip(strings.NewReader(ipsetOutput), "ipset.txt"); err != nil {
+			log.Warnf("Failed to add ipset output to bundle: %v", err)
 		}
 	}
 
@@ -151,44 +154,65 @@ func (g *BundleGenerator) addFirewallRules() error {
 	return nil
 }
 
-// collectIPTablesRules collects rules using both iptables-save and verbose listing
-func collectIPTablesRules() (string, error) {
-	var builder strings.Builder
-
-	saveOutput, err := collectIPTablesSave()
+// addIPTablesRulesToBundle collects iptables/ip6tables rules and writes them to the bundle.
+func (g *BundleGenerator) addIPTablesRulesToBundle(saveBin, listBin, filename string) {
+	rules, err := collectIPTablesRules(saveBin, listBin)
 	if err != nil {
-		log.Warnf("Failed to collect iptables rules using iptables-save: %v", err)
-	} else {
-		builder.WriteString("=== iptables-save output ===\n")
+		log.Warnf("Failed to collect %s rules: %v", listBin, err)
+		return
+	}
+	if g.anonymize {
+		rules = g.anonymizer.AnonymizeString(rules)
+	}
+	if err := g.addFileToZip(strings.NewReader(rules), filename); err != nil {
+		log.Warnf("Failed to add %s rules to bundle: %v", listBin, err)
+	}
+}
+
+// collectIPTablesRules collects rules using both <saveBin> and verbose listing via <listBin>.
+// Returns an error when neither command produced any output (e.g. the binary is missing),
+// so the caller can skip writing an empty file.
+func collectIPTablesRules(saveBin, listBin string) (string, error) {
+	var builder strings.Builder
+	var collected bool
+	var firstErr error
+
+	saveOutput, err := runCommand(saveBin)
+	switch {
+	case err != nil:
+		firstErr = err
+		log.Warnf("Failed to collect %s output: %v", saveBin, err)
+	case strings.TrimSpace(saveOutput) == "":
+		log.Debugf("%s produced no output, skipping", saveBin)
+	default:
+		builder.WriteString(fmt.Sprintf("=== %s output ===\n", saveBin))
 		builder.WriteString(saveOutput)
 		builder.WriteString("\n")
+		collected = true
 	}
 
-	ipsetOutput, err := collectIPSets()
-	if err != nil {
-		log.Warnf("Failed to collect ipset information: %v", err)
-	} else {
-		builder.WriteString("=== ipset list output ===\n")
-		builder.WriteString(ipsetOutput)
-		builder.WriteString("\n")
-	}
-
-	builder.WriteString("=== iptables -v -n -L output ===\n")
+	listHeader := fmt.Sprintf("=== %s -v -n -L output ===\n", listBin)
+	builder.WriteString(listHeader)
 
 	tables := []string{"filter", "nat", "mangle", "raw", "security"}
-
 	for _, table := range tables {
-		builder.WriteString(fmt.Sprintf("*%s\n", table))
-
-		stats, err := getTableStatistics(table)
+		stats, err := runCommand(listBin, "-v", "-n", "-L", "-t", table)
 		if err != nil {
-			log.Warnf("Failed to get statistics for table %s: %v", table, err)
+			if firstErr == nil {
+				firstErr = err
+			}
+			log.Warnf("Failed to get %s statistics for table %s: %v", listBin, table, err)
 			continue
 		}
+		builder.WriteString(fmt.Sprintf("*%s\n", table))
 		builder.WriteString(stats)
 		builder.WriteString("\n")
+		collected = true
 	}
 
+	if !collected {
+		return "", fmt.Errorf("collect %s rules: %w", listBin, firstErr)
+	}
 	return builder.String(), nil
 }
 
@@ -214,34 +238,15 @@ func collectIPSets() (string, error) {
 	return ipsets, nil
 }
 
-// collectIPTablesSave uses iptables-save to get rule definitions
-func collectIPTablesSave() (string, error) {
-	cmd := exec.Command("iptables-save")
+// runCommand executes a command and returns its stdout, wrapping stderr in the error on failure.
+func runCommand(name string, args ...string) (string, error) {
+	cmd := exec.Command(name, args...)
 	var stdout, stderr bytes.Buffer
 	cmd.Stdout = &stdout
 	cmd.Stderr = &stderr
 
 	if err := cmd.Run(); err != nil {
-		return "", fmt.Errorf("execute iptables-save: %w (stderr: %s)", err, stderr.String())
-	}
-
-	rules := stdout.String()
-	if strings.TrimSpace(rules) == "" {
-		return "", fmt.Errorf("no iptables rules found")
-	}
-
-	return rules, nil
-}
-
-// getTableStatistics gets verbose statistics for an entire table using iptables command
-func getTableStatistics(table string) (string, error) {
-	cmd := exec.Command("iptables", "-v", "-n", "-L", "-t", table)
-	var stdout, stderr bytes.Buffer
-	cmd.Stdout = &stdout
-	cmd.Stderr = &stderr
-
-	if err := cmd.Run(); err != nil {
-		return "", fmt.Errorf("execute iptables -v -n -L: %w (stderr: %s)", err, stderr.String())
+		return "", fmt.Errorf("execute %s: %w (stderr: %s)", name, err, stderr.String())
 	}
 
 	return stdout.String(), nil
@@ -804,3 +809,91 @@ func formatSetKeyType(keyType nftables.SetDatatype) string {
 		return fmt.Sprintf("type-%v", keyType)
 	}
 }
+
+// addSysctls collects forwarding and netbird-managed sysctl values and writes them to the bundle.
+func (g *BundleGenerator) addSysctls() error {
+	log.Info("Collecting sysctls")
+	content := collectSysctls()
+	if g.anonymize {
+		content = g.anonymizer.AnonymizeString(content)
+	}
+	if err := g.addFileToZip(strings.NewReader(content), "sysctls.txt"); err != nil {
+		return fmt.Errorf("add sysctls to bundle: %w", err)
+	}
+	return nil
+}
+
+// collectSysctls reads every sysctl that the netbird client may modify, plus
+// global IPv4/IPv6 forwarding, and returns a formatted dump grouped by topic.
+// Per-interface values are enumerated by listing /proc/sys/net/ipv{4,6}/conf.
+func collectSysctls() string {
+	var builder strings.Builder
+
+	writeSysctlGroup(&builder, "forwarding", []string{
+		"net.ipv4.ip_forward",
+		"net.ipv6.conf.all.forwarding",
+		"net.ipv6.conf.default.forwarding",
+	})
+	writeSysctlGroup(&builder, "ipv4 per-interface forwarding", listInterfaceSysctls("ipv4", "forwarding"))
+	writeSysctlGroup(&builder, "ipv6 per-interface forwarding", listInterfaceSysctls("ipv6", "forwarding"))
+	writeSysctlGroup(&builder, "rp_filter", append(
+		[]string{"net.ipv4.conf.all.rp_filter", "net.ipv4.conf.default.rp_filter"},
+		listInterfaceSysctls("ipv4", "rp_filter")...,
+	))
+	writeSysctlGroup(&builder, "src_valid_mark", append(
+		[]string{"net.ipv4.conf.all.src_valid_mark", "net.ipv4.conf.default.src_valid_mark"},
+		listInterfaceSysctls("ipv4", "src_valid_mark")...,
+	))
+	writeSysctlGroup(&builder, "conntrack", []string{
+		"net.netfilter.nf_conntrack_acct",
+		"net.netfilter.nf_conntrack_tcp_loose",
+	})
+	writeSysctlGroup(&builder, "tcp", []string{
+		"net.ipv4.tcp_tw_reuse",
+	})
+
+	return builder.String()
+}
+
+func writeSysctlGroup(builder *strings.Builder, title string, keys []string) {
+	builder.WriteString(fmt.Sprintf("=== %s ===\n", title))
+	for _, key := range keys {
+		value, err := readSysctl(key)
+		if err != nil {
+			builder.WriteString(fmt.Sprintf("%s = <error: %v>\n", key, err))
+			continue
+		}
+		builder.WriteString(fmt.Sprintf("%s = %s\n", key, value))
+	}
+	builder.WriteString("\n")
+}
+
+// listInterfaceSysctls returns net.ipvX.conf.<iface>.<leaf> keys for every
+// interface present in /proc/sys/net/ipvX/conf, skipping "all" and "default"
+// (callers add those explicitly so they appear first).
+func listInterfaceSysctls(family, leaf string) []string {
+	dir := fmt.Sprintf("/proc/sys/net/%s/conf", family)
+	entries, err := os.ReadDir(dir)
+	if err != nil {
+		return nil
+	}
+	var keys []string
+	for _, e := range entries {
+		name := e.Name()
+		if name == "all" || name == "default" {
+			continue
+		}
+		keys = append(keys, fmt.Sprintf("net.%s.conf.%s.%s", family, name, leaf))
+	}
+	sort.Strings(keys)
+	return keys
+}
+
+func readSysctl(key string) (string, error) {
+	path := fmt.Sprintf("/proc/sys/%s", strings.ReplaceAll(key, ".", "/"))
+	value, err := os.ReadFile(path)
+	if err != nil {
+		return "", err
+	}
+	return strings.TrimSpace(string(value)), nil
+}

client/internal/debug/debug_logfiles_test.go

@@ -0,0 +1,103 @@
+package debug
+
+import (
+	"archive/zip"
+	"bytes"
+	"compress/gzip"
+	"io"
+	"os"
+	"path/filepath"
+	"testing"
+	"time"
+
+	"github.com/stretchr/testify/require"
+)
+
+// TestAddRotatedLogFiles_PicksUpAllVariants asserts that the rotated-log
+// glob picks up logs rotated by timberjack (gzipped) and by logrotate (plain
+// and gzipped), and skips unrelated files.
+func TestAddRotatedLogFiles_PicksUpAllVariants(t *testing.T) {
+	dir := t.TempDir()
+
+	writeFile(t, filepath.Join(dir, "client.log"), "active log\n")
+	writeFile(t, filepath.Join(dir, "other.log"), "unrelated\n")
+
+	timberjackRotated := "client-2026-05-21T10-30-45.000.log.gz"
+	writeGzFile(t, filepath.Join(dir, timberjackRotated), "timberjack rotated content\n")
+
+	logrotatePlain := "client.log.1"
+	writeFile(t, filepath.Join(dir, logrotatePlain), "logrotate plain content\n")
+
+	logrotateGz := "client.log.2.gz"
+	writeGzFile(t, filepath.Join(dir, logrotateGz), "logrotate gz content\n")
+
+	names := runAddRotatedLogFiles(t, dir, 10)
+
+	require.Contains(t, names, timberjackRotated, "timberjack rotated file should be in bundle")
+	require.Contains(t, names, logrotatePlain, "logrotate plain rotated file should be in bundle")
+	require.Contains(t, names, logrotateGz, "logrotate gzipped rotated file should be in bundle")
+	require.NotContains(t, names, "client.log", "active log should not be added by addRotatedLogFiles")
+	require.NotContains(t, names, "other.log", "unrelated files should not be in bundle")
+}
+
+// TestAddRotatedLogFiles_RespectsLogFileCount asserts that only the newest
+// logFileCount rotated files are bundled, ordered by mtime.
+func TestAddRotatedLogFiles_RespectsLogFileCount(t *testing.T) {
+	dir := t.TempDir()
+
+	oldest := filepath.Join(dir, "client.log.3")
+	middle := filepath.Join(dir, "client.log.2")
+	newest := filepath.Join(dir, "client.log.1")
+	writeFile(t, oldest, "old\n")
+	writeFile(t, middle, "mid\n")
+	writeFile(t, newest, "new\n")
+
+	now := time.Now()
+	require.NoError(t, os.Chtimes(oldest, now.Add(-2*time.Hour), now.Add(-2*time.Hour)))
+	require.NoError(t, os.Chtimes(middle, now.Add(-1*time.Hour), now.Add(-1*time.Hour)))
+	require.NoError(t, os.Chtimes(newest, now, now))
+
+	names := runAddRotatedLogFiles(t, dir, 2)
+
+	require.Contains(t, names, "client.log.1")
+	require.Contains(t, names, "client.log.2")
+	require.NotContains(t, names, "client.log.3", "oldest file should be dropped when logFileCount=2")
+}
+
+// runAddRotatedLogFiles calls addRotatedLogFiles against a fresh in-memory
+// zip writer and returns the set of entry names that ended up in the archive.
+func runAddRotatedLogFiles(t *testing.T, dir string, logFileCount uint32) map[string]struct{} {
+	t.Helper()
+
+	var buf bytes.Buffer
+	g := &BundleGenerator{
+		archive:      zip.NewWriter(&buf),
+		logFileCount: logFileCount,
+	}
+	g.addRotatedLogFiles(dir)
+	require.NoError(t, g.archive.Close())
+
+	zr, err := zip.NewReader(bytes.NewReader(buf.Bytes()), int64(buf.Len()))
+	require.NoError(t, err)
+
+	names := make(map[string]struct{}, len(zr.File))
+	for _, f := range zr.File {
+		names[f.Name] = struct{}{}
+	}
+	return names
+}
+
+func writeFile(t *testing.T, path, content string) {
+	t.Helper()
+	require.NoError(t, os.WriteFile(path, []byte(content), 0o644))
+}
+
+func writeGzFile(t *testing.T, path, content string) {
+	t.Helper()
+	var buf bytes.Buffer
+	gw := gzip.NewWriter(&buf)
+	_, err := io.WriteString(gw, content)
+	require.NoError(t, err)
+	require.NoError(t, gw.Close())
+	require.NoError(t, os.WriteFile(path, buf.Bytes(), 0o644))
+}

client/internal/debug/debug_nonandroid.go

@@ -1,4 +1,4 @@
-//go:build !android
+//go:build !android && !ios
 
 package debug
 

client/internal/debug/debug_nonlinux.go

@@ -17,3 +17,8 @@ func (g *BundleGenerator) addIPRules() error {
 	// IP rules are only supported on Linux
 	return nil
 }
+
+func (g *BundleGenerator) addSysctls() error {
+	// Sysctl collection is only supported on Linux
+	return nil
+}

client/internal/debug/debug_test.go

@@ -843,6 +843,8 @@ func TestAddConfig_AllFieldsCovered(t *testing.T) {
 		"PreSharedKey":      "sensitive: WireGuard pre-shared key",
 		"SSHKey":            "sensitive: SSH private key",
 		"ClientCertKeyPair": "non-config: parsed cert pair, not serialized",
+		"Name":              "non-config: profile name is not needed for debug purposes",
+		"policy":            "non-config: in-memory MDM policy snapshot, surfaced via Config.Policy() / GetConfigResponse.MDMManagedFields",
 	}
 
 	mURL, _ := url.Parse("https://api.example.com:443")

client/internal/dns/dnsfw/config.go

@@ -1,63 +0,0 @@
-package dnsfw
-
-import (
-	"os"
-	"strconv"
-	"strings"
-
-	log "github.com/sirupsen/logrus"
-)
-
-const (
-	// EnvDisable disables the DNS firewall entirely when set to a truthy value.
-	EnvDisable = "NB_DISABLE_DNS_FIREWALL"
-	// EnvPorts overrides the comma-separated list of remote ports to block.
-	// Empty disables the firewall.
-	EnvPorts = "NB_DNS_FIREWALL_PORTS"
-	// EnvStrict enables strict mode: permit DNS only to the virtual DNS IP
-	// and the netbird daemon. Default mode also permits anything on the
-	// netbird tunnel interface, which is safer if NRPT is silently ignored
-	// by Windows but lets apps reach custom DNS servers via the tunnel.
-	EnvStrict = "NB_DNS_FIREWALL_STRICT"
-)
-
-// defaultBlockedPorts are the well-known DNS ports we block for non-netbird
-// processes: 53 (plain DNS) and 853 (DNS-over-TLS).
-var defaultBlockedPorts = []uint16{53, 853}
-
-// blockedPorts returns the effective port list, honoring env overrides.
-// A nil return means the firewall should not be installed.
-func blockedPorts() []uint16 {
-	if disabled, _ := strconv.ParseBool(os.Getenv(EnvDisable)); disabled {
-		log.Infof("dns firewall disabled via %s", EnvDisable)
-		return nil
-	}
-
-	override, ok := os.LookupEnv(EnvPorts)
-	if !ok {
-		return defaultBlockedPorts
-	}
-
-	var ports []uint16
-	for _, raw := range strings.Split(override, ",") {
-		raw = strings.TrimSpace(raw)
-		if raw == "" {
-			continue
-		}
-		port, err := strconv.ParseUint(raw, 10, 16)
-		if err != nil {
-			log.Warnf("dns firewall: ignoring invalid port %q in %s: %v", raw, EnvPorts, err)
-			continue
-		}
-		if port == 0 {
-			log.Warnf("dns firewall: ignoring port 0 in %s", EnvPorts)
-			continue
-		}
-		ports = append(ports, uint16(port))
-	}
-	if len(ports) == 0 {
-		log.Infof("dns firewall disabled: %s yielded no valid ports", EnvPorts)
-		return nil
-	}
-	return ports
-}

client/internal/dns/dnsfw/config_test.go

@@ -1,39 +0,0 @@
-package dnsfw
-
-import (
-	"reflect"
-	"testing"
-)
-
-func TestBlockedPorts(t *testing.T) {
-	tests := []struct {
-		name     string
-		disable  string
-		ports    string
-		setPorts bool
-		want     []uint16
-	}{
-		{name: "default", want: defaultBlockedPorts},
-		{name: "disabled", disable: "true", want: nil},
-		{name: "disabled false keeps default", disable: "false", want: defaultBlockedPorts},
-		{name: "override single port", ports: "53", setPorts: true, want: []uint16{53}},
-		{name: "override multi", ports: "53, 853 ,5353", setPorts: true, want: []uint16{53, 853, 5353}},
-		{name: "override empty disables", ports: "", setPorts: true, want: nil},
-		{name: "override invalid skipped", ports: "53,not-a-port,853", setPorts: true, want: []uint16{53, 853}},
-		{name: "override zero skipped", ports: "53,0,853", setPorts: true, want: []uint16{53, 853}},
-		{name: "override only invalid disables", ports: "abc", setPorts: true, want: nil},
-	}
-
-	for _, tc := range tests {
-		t.Run(tc.name, func(t *testing.T) {
-			t.Setenv(EnvDisable, tc.disable)
-			if tc.setPorts {
-				t.Setenv(EnvPorts, tc.ports)
-			}
-			got := blockedPorts()
-			if !reflect.DeepEqual(got, tc.want) {
-				t.Fatalf("blockedPorts() = %v, want %v", got, tc.want)
-			}
-		})
-	}
-}

client/internal/dns/dnsfw/dnsfw.go

@@ -1,16 +0,0 @@
-// Package dnsfw blocks DNS traffic from non-netbird processes when netbird is
-// managing the host's DNS, so that resolvers running on apps or libraries
-// outside netbird cannot bypass the configured DNS path.
-//
-// Implementation is Windows-only (uses WFP). On other platforms New returns
-// a no-op manager.
-package dnsfw
-
-import "net/netip"
-
-// Manager controls the per-tunnel DNS firewall. Both methods must be safe
-// to call multiple times.
-type Manager interface {
-	Enable(ifaceGUID string, virtualDNSIP netip.Addr) error
-	Disable() error
-}

client/internal/dns/dnsfw/dnsfw_other.go

@@ -1,15 +0,0 @@
-//go:build !windows
-
-package dnsfw
-
-import "net/netip"
-
-type noopManager struct{}
-
-func (noopManager) Enable(string, netip.Addr) error { return nil }
-func (noopManager) Disable() error                  { return nil }
-
-// New returns a no-op manager on non-Windows platforms.
-func New() Manager {
-	return noopManager{}
-}

client/internal/dns/dnsfw/dnsfw_windows.go

@@ -1,144 +0,0 @@
-//go:build windows
-
-package dnsfw
-
-import (
-	"fmt"
-	"net/netip"
-	"os"
-	"strconv"
-	"sync"
-	"unsafe"
-
-	log "github.com/sirupsen/logrus"
-	"golang.org/x/sys/windows"
-)
-
-var (
-	modIphlpapi                    = windows.NewLazyDLL("iphlpapi.dll")
-	procConvertInterfaceGuidToLuid = modIphlpapi.NewProc("ConvertInterfaceGuidToLuid")
-)
-
-type windowsManager struct {
-	mu sync.Mutex
-	// session is the WFP engine handle. Zero when disabled.
-	session uintptr
-}
-
-// Enable installs the dns firewall. Strict mode propagates failures;
-// non-strict mode logs and returns nil so partial protection is preserved.
-func (m *windowsManager) Enable(ifaceGUID string, virtualDNSIP netip.Addr) error {
-	m.mu.Lock()
-	defer m.mu.Unlock()
-
-	ports := blockedPorts()
-	if len(ports) == 0 {
-		return nil
-	}
-
-	if m.session != 0 {
-		if err := m.disableLocked(); err != nil {
-			return fmt.Errorf("reset existing dns firewall session: %w", err)
-		}
-	}
-
-	strict := strictMode()
-
-	luid, err := luidFromGUID(ifaceGUID)
-	if err != nil {
-		return m.failOrLog(strict, fmt.Errorf("resolve tun luid from guid %s: %w", ifaceGUID, err))
-	}
-
-	exe, err := os.Executable()
-	if err != nil {
-		return m.failOrLog(strict, fmt.Errorf("resolve daemon executable path: %w", err))
-	}
-
-	cfg := installConfig{
-		tunLUID:      luid,
-		daemonExe:    exe,
-		blockedPorts: ports,
-		strict:       strict,
-		virtualDNSIP: virtualDNSIP,
-	}
-	// session==0 signals a hard failure; non-zero with non-nil err is a partial install.
-	session, installErr := installFilters(cfg)
-	if session == 0 {
-		return m.failOrLog(strict, fmt.Errorf("install dns firewall filters: %w", installErr))
-	}
-
-	if installErr != nil && strict {
-		_ = closeSession(session)
-		return fmt.Errorf("strict dns firewall: partial install: %w", installErr)
-	}
-
-	m.session = session
-	log.Infof("dns firewall installed: iface=%s daemon=%s ports=%v strict=%v virtual_dns=%s",
-		ifaceGUID, exe, ports, strict, virtualDNSIP)
-	if installErr != nil {
-		log.Warnf("dns firewall partially installed (some filters failed): %v", installErr)
-	}
-	return nil
-}
-
-func (m *windowsManager) Disable() error {
-	m.mu.Lock()
-	defer m.mu.Unlock()
-	return m.disableLocked()
-}
-
-func (m *windowsManager) disableLocked() error {
-	if m.session == 0 {
-		return nil
-	}
-	session := m.session
-	m.session = 0
-	if err := closeSession(session); err != nil {
-		return fmt.Errorf("close wfp session: %w", err)
-	}
-	log.Info("dns firewall removed")
-	return nil
-}
-
-// failOrLog returns err unchanged in strict mode. In non-strict mode the
-// error is logged and nil is returned.
-func (m *windowsManager) failOrLog(strict bool, err error) error {
-	if strict {
-		return err
-	}
-	log.Errorf("dns firewall: %v", err)
-	return nil
-}
-
-// New returns a Windows DNS firewall manager backed by WFP.
-func New() Manager {
-	return &windowsManager{}
-}
-
-// strictMode reports whether strict mode is enabled via env.
-func strictMode() bool {
-	v, _ := strconv.ParseBool(os.Getenv(EnvStrict))
-	return v
-}
-
-// luidFromGUID converts a Windows interface GUID string to its LUID.
-func luidFromGUID(ifaceGUID string) (luid uint64, err error) {
-	defer func() {
-		if r := recover(); r != nil {
-			err = fmt.Errorf("panic in luidFromGUID: %v", r)
-		}
-	}()
-
-	guid, err := windows.GUIDFromString(ifaceGUID)
-	if err != nil {
-		return 0, fmt.Errorf("parse guid: %w", err)
-	}
-	rc, _, _ := procConvertInterfaceGuidToLuid.Call(
-		uintptr(unsafe.Pointer(&guid)),
-		uintptr(unsafe.Pointer(&luid)),
-	)
-	if rc != 0 {
-		return 0, fmt.Errorf("ConvertInterfaceGuidToLuid returned %d", rc)
-	}
-	return luid, nil
-}

client/internal/dns/dnsfw/dnsfw_windows_test.go

@@ -1,72 +0,0 @@
-//go:build windows
-
-package dnsfw
-
-import (
-	"net/netip"
-	"os"
-	"testing"
-)
-
-func TestStrictMode(t *testing.T) {
-	tests := []struct {
-		name string
-		val  string
-		set  bool
-		want bool
-	}{
-		{name: "unset", want: false},
-		{name: "true", val: "true", set: true, want: true},
-		{name: "1", val: "1", set: true, want: true},
-		{name: "false", val: "false", set: true, want: false},
-		{name: "invalid is false", val: "garbage", set: true, want: false},
-	}
-	for _, tc := range tests {
-		t.Run(tc.name, func(t *testing.T) {
-			t.Setenv(EnvStrict, tc.val)
-			if !tc.set {
-				os.Unsetenv(EnvStrict)
-			}
-			if got := strictMode(); got != tc.want {
-				t.Fatalf("strictMode() = %v, want %v", got, tc.want)
-			}
-		})
-	}
-}
-
-func TestWindowsManagerDisableIdempotent(t *testing.T) {
-	m := &windowsManager{}
-	if err := m.Disable(); err != nil {
-		t.Fatalf("first Disable on fresh manager: %v", err)
-	}
-	if err := m.Disable(); err != nil {
-		t.Fatalf("second Disable on fresh manager: %v", err)
-	}
-	if m.session != 0 {
-		t.Fatalf("session should remain zero, got %d", m.session)
-	}
-}
-
-func TestWindowsManagerEnableNoOpWhenDisabledByEnv(t *testing.T) {
-	t.Setenv(EnvDisable, "true")
-
-	m := &windowsManager{}
-	if err := m.Enable("00000000-0000-0000-0000-000000000000", netip.Addr{}); err != nil {
-		t.Fatalf("Enable should be a no-op when firewall disabled by env: %v", err)
-	}
-	if m.session != 0 {
-		t.Fatalf("session must remain zero when env disables firewall, got %d", m.session)
-	}
-}
-
-func TestWindowsManagerEnableNoOpWhenPortsEmpty(t *testing.T) {
-	t.Setenv(EnvPorts, "")
-
-	m := &windowsManager{}
-	if err := m.Enable("00000000-0000-0000-0000-000000000000", netip.Addr{}); err != nil {
-		t.Fatalf("Enable should be a no-op when ports list is empty: %v", err)
-	}
-	if m.session != 0 {
-		t.Fatalf("session must remain zero when ports list is empty, got %d", m.session)
-	}
-}

client/internal/dns/dnsfw/helpers_windows.go

@@ -1,53 +0,0 @@
-/* SPDX-License-Identifier: MIT
- *
- * Copyright (C) 2019-2021 WireGuard LLC. All Rights Reserved.
- *
- * Adapted from wireguard-windows tunnel/firewall/helpers.go.
- */
-
-package dnsfw
-
-import (
-	"errors"
-	"fmt"
-	"runtime"
-	"syscall"
-
-	"golang.org/x/sys/windows"
-)
-
-func createWtFwpmDisplayData0(name, description string) (*wtFwpmDisplayData0, error) {
-	namePtr, err := windows.UTF16PtrFromString(name)
-	if err != nil {
-		return nil, wrapErr(err)
-	}
-
-	descriptionPtr, err := windows.UTF16PtrFromString(description)
-	if err != nil {
-		return nil, wrapErr(err)
-	}
-
-	return &wtFwpmDisplayData0{
-		name:        namePtr,
-		description: descriptionPtr,
-	}, nil
-}
-
-func filterWeight(weight uint8) wtFwpValue0 {
-	return wtFwpValue0{
-		_type: cFWP_UINT8,
-		value: uintptr(weight),
-	}
-}
-
-func wrapErr(err error) error {
-	var errno syscall.Errno
-	if !errors.As(err, &errno) {
-		return err
-	}
-	_, file, line, ok := runtime.Caller(1)
-	if !ok {
-		return fmt.Errorf("wfp error at unknown location: %w", err)
-	}
-	return fmt.Errorf("wfp error at %s:%d: %w", file, line, err)
-}

client/internal/dns/dnsfw/rules_windows.go

@@ -1,249 +0,0 @@
-/* SPDX-License-Identifier: MIT
- *
- * Copyright (C) 2019-2021 WireGuard LLC. All Rights Reserved.
- * Copyright (C) 2026 NetBird GmbH. All Rights Reserved.
- *
- * Filter installers adapted from wireguard-windows tunnel/firewall/rules.go.
- * The block-DNS approach (port 53 + UDP/TCP) matches what wireguard-windows
- * uses for its kill-switch DNS leak protection. We extend it with a
- * configurable port set so we also cover :853 (DoT) and any future ports.
- */
-
-package dnsfw
-
-import (
-	"encoding/binary"
-	"fmt"
-	"net/netip"
-	"unsafe"
-
-	"github.com/hashicorp/go-multierror"
-	"golang.org/x/sys/windows"
-
-	nberrors "github.com/netbirdio/netbird/client/errors"
-)
-
-// Filters install at outbound ALE_AUTH_CONNECT layers only; inbound replies
-// follow the authorized outbound flow.
-
-// permitTunInterface installs a permit filter for any traffic whose local
-// interface is the netbird tunnel.
-func permitTunInterface(session uintptr, base *baseObjects, weight uint8, ifLUID uint64) error {
-	cond := wtFwpmFilterCondition0{
-		fieldKey:  cFWPM_CONDITION_IP_LOCAL_INTERFACE,
-		matchType: cFWP_MATCH_EQUAL,
-		conditionValue: wtFwpConditionValue0{
-			_type: cFWP_UINT64,
-			value: uintptr(unsafe.Pointer(&ifLUID)),
-		},
-	}
-
-	filter := wtFwpmFilter0{
-		providerKey:         &base.provider,
-		subLayerKey:         base.filters,
-		weight:              filterWeight(weight),
-		numFilterConditions: 1,
-		filterCondition:     (*wtFwpmFilterCondition0)(unsafe.Pointer(&cond)),
-		action:              wtFwpmAction0{_type: cFWP_ACTION_PERMIT},
-	}
-
-	return addOutboundFilters(session, &filter, "Permit netbird tunnel")
-}
-
-// permitDaemonByAppID installs a permit filter matching the netbird daemon
-// executable by App-ID. App-ID alone is sufficient because netbird.exe is a
-// dedicated binary.
-func permitDaemonByAppID(session uintptr, base *baseObjects, daemonExe string, weight uint8) error {
-	appID, err := daemonAppID(daemonExe)
-	if err != nil {
-		return err
-	}
-	defer fwpmFreeMemory0(unsafe.Pointer(&appID))
-
-	cond := wtFwpmFilterCondition0{
-		fieldKey:  cFWPM_CONDITION_ALE_APP_ID,
-		matchType: cFWP_MATCH_EQUAL,
-		conditionValue: wtFwpConditionValue0{
-			_type: cFWP_BYTE_BLOB_TYPE,
-			value: uintptr(unsafe.Pointer(appID)),
-		},
-	}
-
-	filter := wtFwpmFilter0{
-		providerKey:         &base.provider,
-		subLayerKey:         base.filters,
-		weight:              filterWeight(weight),
-		numFilterConditions: 1,
-		filterCondition:     (*wtFwpmFilterCondition0)(unsafe.Pointer(&cond)),
-		action:              wtFwpmAction0{_type: cFWP_ACTION_PERMIT},
-	}
-
-	return addOutboundFilters(session, &filter, "Permit netbird daemon")
-}
-
-// permitVirtualDNSIP installs a permit filter for DNS-port traffic destined
-// for the in-tunnel virtual DNS IP. Used in strict mode in lieu of
-// permitTunInterface.
-func permitVirtualDNSIP(session uintptr, base *baseObjects, ip netip.Addr, ports []uint16, weight uint8) error {
-	var merr *multierror.Error
-	for _, port := range ports {
-		if err := permitDNSToHost(session, base, ip, port, weight); err != nil {
-			merr = multierror.Append(merr, fmt.Errorf("permit %s:%d: %w", ip, port, err))
-		}
-	}
-	return nberrors.FormatErrorOrNil(merr)
-}
-
-func permitDNSToHost(session uintptr, base *baseObjects, ip netip.Addr, port uint16, weight uint8) error {
-	if !ip.IsValid() {
-		return fmt.Errorf("invalid address")
-	}
-
-	var addrCond wtFwpmFilterCondition0
-	var layer windows.GUID
-	// v6 backing must outlive fwpmFilterAdd0; keep it on this stack frame.
-	var v6 wtFwpByteArray16
-
-	if ip.Is4() {
-		v4 := ip.As4()
-		addrCond = wtFwpmFilterCondition0{
-			fieldKey:  cFWPM_CONDITION_IP_REMOTE_ADDRESS,
-			matchType: cFWP_MATCH_EQUAL,
-			conditionValue: wtFwpConditionValue0{
-				_type: cFWP_UINT32,
-				value: uintptr(binary.BigEndian.Uint32(v4[:])),
-			},
-		}
-		layer = cFWPM_LAYER_ALE_AUTH_CONNECT_V4
-	} else {
-		v6 = wtFwpByteArray16{byteArray16: ip.As16()}
-		addrCond = wtFwpmFilterCondition0{
-			fieldKey:  cFWPM_CONDITION_IP_REMOTE_ADDRESS,
-			matchType: cFWP_MATCH_EQUAL,
-			conditionValue: wtFwpConditionValue0{
-				_type: cFWP_BYTE_ARRAY16_TYPE,
-				value: uintptr(unsafe.Pointer(&v6)),
-			},
-		}
-		layer = cFWPM_LAYER_ALE_AUTH_CONNECT_V6
-	}
-
-	conditions := [2]wtFwpmFilterCondition0{
-		addrCond,
-		{
-			fieldKey:  cFWPM_CONDITION_IP_REMOTE_PORT,
-			matchType: cFWP_MATCH_EQUAL,
-			conditionValue: wtFwpConditionValue0{
-				_type: cFWP_UINT16,
-				value: uintptr(port),
-			},
-		},
-	}
-	filter := wtFwpmFilter0{
-		providerKey:         &base.provider,
-		subLayerKey:         base.filters,
-		weight:              filterWeight(weight),
-		numFilterConditions: uint32(len(conditions)),
-		filterCondition:     (*wtFwpmFilterCondition0)(unsafe.Pointer(&conditions[0])),
-		action:              wtFwpmAction0{_type: cFWP_ACTION_PERMIT},
-	}
-
-	display, err := createWtFwpmDisplayData0(fmt.Sprintf("Permit DNS to %s:%d", ip, port), "")
-	if err != nil {
-		return wrapErr(err)
-	}
-	filter.displayData = *display
-	filter.layerKey = layer
-
-	var filterID uint64
-	if err := fwpmFilterAdd0(session, &filter, 0, &filterID); err != nil {
-		return wrapErr(err)
-	}
-	_ = v6
-	return nil
-}
-
-// blockDNSPorts installs a deny filter for outbound traffic to each of the
-// given remote ports over UDP or TCP. Per-port and per-layer failures are
-// accumulated; partial coverage is preferred over zero coverage.
-func blockDNSPorts(session uintptr, base *baseObjects, ports []uint16, weight uint8) error {
-	var merr *multierror.Error
-	for _, port := range ports {
-		if err := blockDNSPort(session, base, port, weight); err != nil {
-			merr = multierror.Append(merr, fmt.Errorf("block port %d: %w", port, err))
-		}
-	}
-	return nberrors.FormatErrorOrNil(merr)
-}
-
-func blockDNSPort(session uintptr, base *baseObjects, port uint16, weight uint8) error {
-	conditions := [3]wtFwpmFilterCondition0{
-		{
-			fieldKey:  cFWPM_CONDITION_IP_REMOTE_PORT,
-			matchType: cFWP_MATCH_EQUAL,
-			conditionValue: wtFwpConditionValue0{
-				_type: cFWP_UINT16,
-				value: uintptr(port),
-			},
-		},
-		{
-			fieldKey:  cFWPM_CONDITION_IP_PROTOCOL,
-			matchType: cFWP_MATCH_EQUAL,
-			conditionValue: wtFwpConditionValue0{
-				_type: cFWP_UINT8,
-				value: uintptr(cIPPROTO_UDP),
-			},
-		},
-		// Repeat the IP_PROTOCOL condition for logical OR with TCP.
-		{
-			fieldKey:  cFWPM_CONDITION_IP_PROTOCOL,
-			matchType: cFWP_MATCH_EQUAL,
-			conditionValue: wtFwpConditionValue0{
-				_type: cFWP_UINT8,
-				value: uintptr(cIPPROTO_TCP),
-			},
-		},
-	}
-
-	filter := wtFwpmFilter0{
-		providerKey:         &base.provider,
-		subLayerKey:         base.filters,
-		weight:              filterWeight(weight),
-		numFilterConditions: uint32(len(conditions)),
-		filterCondition:     (*wtFwpmFilterCondition0)(unsafe.Pointer(&conditions[0])),
-		action:              wtFwpmAction0{_type: cFWP_ACTION_BLOCK},
-	}
-
-	return addOutboundFilters(session, &filter, fmt.Sprintf("Block DNS port %d", port))
-}
-
-// addOutboundFilters installs the same filter on the v4 and v6 outbound ALE
-// connect layers. v4 and v6 are installed independently: failure on one
-// layer does not abort the other, and the accumulated errors are returned.
-// Partial coverage is preferred over zero coverage.
-func addOutboundFilters(session uintptr, filter *wtFwpmFilter0, name string) error {
-	layers := [...]struct {
-		layer windows.GUID
-		label string
-	}{
-		{cFWPM_LAYER_ALE_AUTH_CONNECT_V4, name + " (IPv4)"},
-		{cFWPM_LAYER_ALE_AUTH_CONNECT_V6, name + " (IPv6)"},
-	}
-
-	var merr *multierror.Error
-	for _, l := range layers {
-		display, err := createWtFwpmDisplayData0(l.label, "")
-		if err != nil {
-			merr = multierror.Append(merr, fmt.Errorf("%s: %w", l.label, wrapErr(err)))
-			continue
-		}
-		filter.displayData = *display
-		filter.layerKey = l.layer
-
-		var filterID uint64
-		if err := fwpmFilterAdd0(session, filter, 0, &filterID); err != nil {
-			merr = multierror.Append(merr, fmt.Errorf("%s: %w", l.label, wrapErr(err)))
-		}
-	}
-	return nberrors.FormatErrorOrNil(merr)
-}

client/internal/dns/dnsfw/session_windows.go

@@ -1,177 +0,0 @@
-/* SPDX-License-Identifier: MIT
- *
- * Copyright (C) 2019-2021 WireGuard LLC. All Rights Reserved.
- * Copyright (C) 2026 NetBird GmbH. All Rights Reserved.
- *
- * Session lifecycle and the high-level Install/Close entry points adapted
- * from wireguard-windows tunnel/firewall.
- */
-
-package dnsfw
-
-import (
-	"errors"
-	"fmt"
-	"net/netip"
-	"unsafe"
-
-	"github.com/hashicorp/go-multierror"
-	"golang.org/x/sys/windows"
-
-	nberrors "github.com/netbirdio/netbird/client/errors"
-)
-
-// installConfig is the input to installFilters.
-type installConfig struct {
-	tunLUID      uint64
-	daemonExe    string
-	blockedPorts []uint16
-	// strict, when true, narrows the carve-out from "anything on tun" to
-	// "DNS only to virtualDNSIP". virtualDNSIP must be valid in this case.
-	strict       bool
-	virtualDNSIP netip.Addr
-}
-
-// baseObjects holds the GUIDs of the WFP provider and sublayer registered
-// for our session. Both are randomly generated per session.
-type baseObjects struct {
-	provider windows.GUID
-	filters  windows.GUID
-}
-
-// installFilters opens a dynamic WFP session and installs the netbird DNS
-// firewall filters. Returns a zero session on hard failure (session create,
-// base objects); a non-zero session with a non-nil error is a partial install
-// (some per-filter installs failed) and is safe to close.
-func installFilters(cfg installConfig) (session uintptr, err error) {
-	defer func() {
-		if r := recover(); r != nil {
-			// Dynamic session: kernel will clean up on process exit even
-			// if we leave the handle dangling here.
-			err = fmt.Errorf("panic in installFilters: %v", r)
-		}
-	}()
-
-	if len(cfg.blockedPorts) == 0 {
-		return 0, errors.New("dns firewall: no blocked ports configured")
-	}
-	if cfg.strict && !cfg.virtualDNSIP.IsValid() {
-		return 0, errors.New("dns firewall: strict mode requires a valid virtual DNS IP")
-	}
-
-	session, err = createSession()
-	if err != nil {
-		return 0, err
-	}
-
-	base, err := registerBaseObjects(session)
-	if err != nil {
-		_ = fwpmEngineClose0(session)
-		return 0, fmt.Errorf("register base objects: %w", err)
-	}
-
-	var merr *multierror.Error
-	if cfg.strict {
-		if err := permitVirtualDNSIP(session, base, cfg.virtualDNSIP, cfg.blockedPorts, 15); err != nil {
-			merr = multierror.Append(merr, fmt.Errorf("permit virtual dns: %w", err))
-		}
-	} else {
-		if err := permitTunInterface(session, base, 15, cfg.tunLUID); err != nil {
-			merr = multierror.Append(merr, fmt.Errorf("permit tun interface: %w", err))
-		}
-	}
-	if err := permitDaemonByAppID(session, base, cfg.daemonExe, 14); err != nil {
-		merr = multierror.Append(merr, fmt.Errorf("permit netbird daemon: %w", err))
-	}
-	if err := blockDNSPorts(session, base, cfg.blockedPorts, 10); err != nil {
-		merr = multierror.Append(merr, fmt.Errorf("block dns ports: %w", err))
-	}
-
-	return session, nberrors.FormatErrorOrNil(merr)
-}
-
-// closeSession tears down a WFP session previously opened by installFilters.
-// All filters owned by the session are removed.
-func closeSession(session uintptr) (err error) {
-	defer func() {
-		if r := recover(); r != nil {
-			err = fmt.Errorf("panic in closeSession: %v", r)
-		}
-	}()
-
-	if session == 0 {
-		return nil
-	}
-	if err := fwpmEngineClose0(session); err != nil {
-		return wrapErr(err)
-	}
-	return nil
-}
-
-func createSession() (uintptr, error) {
-	displayData, err := createWtFwpmDisplayData0("NetBird DNS firewall", "NetBird DNS firewall dynamic session")
-	if err != nil {
-		return 0, wrapErr(err)
-	}
-	session := wtFwpmSession0{
-		displayData:          *displayData,
-		flags:                cFWPM_SESSION_FLAG_DYNAMIC,
-		txnWaitTimeoutInMSec: windows.INFINITE,
-	}
-	var handle uintptr
-	if err := fwpmEngineOpen0(nil, cRPC_C_AUTHN_WINNT, nil, &session, unsafe.Pointer(&handle)); err != nil {
-		return 0, wrapErr(err)
-	}
-	return handle, nil
-}
-
-func registerBaseObjects(session uintptr) (*baseObjects, error) {
-	bo := &baseObjects{}
-	var err error
-	if bo.provider, err = windows.GenerateGUID(); err != nil {
-		return nil, wrapErr(err)
-	}
-	if bo.filters, err = windows.GenerateGUID(); err != nil {
-		return nil, wrapErr(err)
-	}
-
-	displayData, err := createWtFwpmDisplayData0("NetBird DNS firewall", "NetBird DNS firewall provider")
-	if err != nil {
-		return nil, wrapErr(err)
-	}
-	provider := wtFwpmProvider0{
-		providerKey: bo.provider,
-		displayData: *displayData,
-	}
-	if err := fwpmProviderAdd0(session, &provider, 0); err != nil {
-		return nil, wrapErr(err)
-	}
-
-	subDisplay, err := createWtFwpmDisplayData0("NetBird DNS firewall filters", "Permit and block filters")
-	if err != nil {
-		return nil, wrapErr(err)
-	}
-	sublayer := wtFwpmSublayer0{
-		subLayerKey: bo.filters,
-		displayData: *subDisplay,
-		providerKey: &bo.provider,
-		weight:      ^uint16(0),
-	}
-	if err := fwpmSubLayerAdd0(session, &sublayer, 0); err != nil {
-		return nil, wrapErr(err)
-	}
-	return bo, nil
-}
-
-// daemonAppID returns the WFP App-ID byte blob for the given executable path.
-func daemonAppID(path string) (*wtFwpByteBlob, error) {
-	pathPtr, err := windows.UTF16PtrFromString(path)
-	if err != nil {
-		return nil, wrapErr(err)
-	}
-	var appID *wtFwpByteBlob
-	if err := fwpmGetAppIdFromFileName0(pathPtr, unsafe.Pointer(&appID)); err != nil {
-		return nil, wrapErr(err)
-	}
-	return appID, nil
-}

client/internal/dns/dnsfw/syscall_windows.go

@@ -1,38 +0,0 @@
-/* SPDX-License-Identifier: MIT
- *
- * Copyright (C) 2019-2021 WireGuard LLC. All Rights Reserved.
- *
- * Adapted from wireguard-windows tunnel/firewall/syscall_windows.go.
- */
-
-package dnsfw
-
-// https://docs.microsoft.com/en-us/windows/desktop/api/fwpmu/nf-fwpmu-fwpmengineopen0
-//sys	fwpmEngineOpen0(serverName *uint16, authnService wtRpcCAuthN, authIdentity *uintptr, session *wtFwpmSession0, engineHandle unsafe.Pointer) (err error) [failretval!=0] = fwpuclnt.FwpmEngineOpen0
-
-// https://docs.microsoft.com/en-us/windows/desktop/api/fwpmu/nf-fwpmu-fwpmengineclose0
-//sys	fwpmEngineClose0(engineHandle uintptr) (err error) [failretval!=0] = fwpuclnt.FwpmEngineClose0
-
-// https://docs.microsoft.com/en-us/windows/desktop/api/fwpmu/nf-fwpmu-fwpmsublayeradd0
-//sys	fwpmSubLayerAdd0(engineHandle uintptr, subLayer *wtFwpmSublayer0, sd uintptr) (err error) [failretval!=0] = fwpuclnt.FwpmSubLayerAdd0
-
-// https://docs.microsoft.com/en-us/windows/desktop/api/fwpmu/nf-fwpmu-fwpmgetappidfromfilename0
-//sys	fwpmGetAppIdFromFileName0(fileName *uint16, appID unsafe.Pointer) (err error) [failretval!=0] = fwpuclnt.FwpmGetAppIdFromFileName0
-
-// https://docs.microsoft.com/en-us/windows/desktop/api/fwpmu/nf-fwpmu-fwpmfreememory0
-//sys	fwpmFreeMemory0(p unsafe.Pointer) = fwpuclnt.FwpmFreeMemory0
-
-// https://docs.microsoft.com/en-us/windows/desktop/api/fwpmu/nf-fwpmu-fwpmfilteradd0
-//sys	fwpmFilterAdd0(engineHandle uintptr, filter *wtFwpmFilter0, sd uintptr, id *uint64) (err error) [failretval!=0] = fwpuclnt.FwpmFilterAdd0
-
-// https://docs.microsoft.com/en-us/windows/desktop/api/Fwpmu/nf-fwpmu-fwpmtransactionbegin0
-//sys	fwpmTransactionBegin0(engineHandle uintptr, flags uint32) (err error) [failretval!=0] = fwpuclnt.FwpmTransactionBegin0
-
-// https://docs.microsoft.com/en-us/windows/desktop/api/fwpmu/nf-fwpmu-fwpmtransactioncommit0
-//sys	fwpmTransactionCommit0(engineHandle uintptr) (err error) [failretval!=0] = fwpuclnt.FwpmTransactionCommit0
-
-// https://docs.microsoft.com/en-us/windows/desktop/api/fwpmu/nf-fwpmu-fwpmtransactionabort0
-//sys	fwpmTransactionAbort0(engineHandle uintptr) (err error) [failretval!=0] = fwpuclnt.FwpmTransactionAbort0
-
-// https://docs.microsoft.com/en-us/windows/desktop/api/fwpmu/nf-fwpmu-fwpmprovideradd0
-//sys	fwpmProviderAdd0(engineHandle uintptr, provider *wtFwpmProvider0, sd uintptr) (err error) [failretval!=0] = fwpuclnt.FwpmProviderAdd0

client/internal/dns/dnsfw/types_windows.go

@@ -1,414 +0,0 @@
-/* SPDX-License-Identifier: MIT
- *
- * Copyright (C) 2019-2021 WireGuard LLC. All Rights Reserved.
- *
- * Adapted from wireguard-windows tunnel/firewall/types_windows.go.
- */
-
-package dnsfw
-
-import "golang.org/x/sys/windows"
-
-const (
-	anysizeArray = 1 // ANYSIZE_ARRAY defined in winnt.h
-
-	wtFwpBitmapArray64_Size = 8
-
-	wtFwpByteArray16_Size = 16
-
-	wtFwpByteArray6_Size = 6
-
-	wtFwpmAction0_Size              = 20
-	wtFwpmAction0_filterType_Offset = 4
-
-	wtFwpV4AddrAndMask_Size        = 8
-	wtFwpV4AddrAndMask_mask_Offset = 4
-
-	wtFwpV6AddrAndMask_Size                = 17
-	wtFwpV6AddrAndMask_prefixLength_Offset = 16
-)
-
-type wtFwpActionFlag uint32
-
-const (
-	cFWP_ACTION_FLAG_TERMINATING     wtFwpActionFlag = 0x00001000
-	cFWP_ACTION_FLAG_NON_TERMINATING wtFwpActionFlag = 0x00002000
-	cFWP_ACTION_FLAG_CALLOUT         wtFwpActionFlag = 0x00004000
-)
-
-// FWP_ACTION_TYPE defined in fwptypes.h
-type wtFwpActionType uint32
-
-const (
-	cFWP_ACTION_BLOCK               wtFwpActionType = wtFwpActionType(0x00000001 | cFWP_ACTION_FLAG_TERMINATING)
-	cFWP_ACTION_PERMIT              wtFwpActionType = wtFwpActionType(0x00000002 | cFWP_ACTION_FLAG_TERMINATING)
-	cFWP_ACTION_CALLOUT_TERMINATING wtFwpActionType = wtFwpActionType(0x00000003 | cFWP_ACTION_FLAG_CALLOUT | cFWP_ACTION_FLAG_TERMINATING)
-	cFWP_ACTION_CALLOUT_INSPECTION  wtFwpActionType = wtFwpActionType(0x00000004 | cFWP_ACTION_FLAG_CALLOUT | cFWP_ACTION_FLAG_NON_TERMINATING)
-	cFWP_ACTION_CALLOUT_UNKNOWN     wtFwpActionType = wtFwpActionType(0x00000005 | cFWP_ACTION_FLAG_CALLOUT)
-	cFWP_ACTION_CONTINUE            wtFwpActionType = wtFwpActionType(0x00000006 | cFWP_ACTION_FLAG_NON_TERMINATING)
-	cFWP_ACTION_NONE                wtFwpActionType = 0x00000007
-	cFWP_ACTION_NONE_NO_MATCH       wtFwpActionType = 0x00000008
-	cFWP_ACTION_BITMAP_INDEX_SET    wtFwpActionType = 0x00000009
-)
-
-// FWP_BYTE_BLOB defined in fwptypes.h
-// (https://docs.microsoft.com/en-us/windows/desktop/api/fwptypes/ns-fwptypes-fwp_byte_blob_)
-type wtFwpByteBlob struct {
-	size uint32
-	data *uint8
-}
-
-// FWP_MATCH_TYPE defined in fwptypes.h
-// (https://docs.microsoft.com/en-us/windows/desktop/api/fwptypes/ne-fwptypes-fwp_match_type_)
-type wtFwpMatchType uint32
-
-const (
-	cFWP_MATCH_EQUAL                  wtFwpMatchType = 0
-	cFWP_MATCH_GREATER                wtFwpMatchType = cFWP_MATCH_EQUAL + 1
-	cFWP_MATCH_LESS                   wtFwpMatchType = cFWP_MATCH_GREATER + 1
-	cFWP_MATCH_GREATER_OR_EQUAL       wtFwpMatchType = cFWP_MATCH_LESS + 1
-	cFWP_MATCH_LESS_OR_EQUAL          wtFwpMatchType = cFWP_MATCH_GREATER_OR_EQUAL + 1
-	cFWP_MATCH_RANGE                  wtFwpMatchType = cFWP_MATCH_LESS_OR_EQUAL + 1
-	cFWP_MATCH_FLAGS_ALL_SET          wtFwpMatchType = cFWP_MATCH_RANGE + 1
-	cFWP_MATCH_FLAGS_ANY_SET          wtFwpMatchType = cFWP_MATCH_FLAGS_ALL_SET + 1
-	cFWP_MATCH_FLAGS_NONE_SET         wtFwpMatchType = cFWP_MATCH_FLAGS_ANY_SET + 1
-	cFWP_MATCH_EQUAL_CASE_INSENSITIVE wtFwpMatchType = cFWP_MATCH_FLAGS_NONE_SET + 1
-	cFWP_MATCH_NOT_EQUAL              wtFwpMatchType = cFWP_MATCH_EQUAL_CASE_INSENSITIVE + 1
-	cFWP_MATCH_PREFIX                 wtFwpMatchType = cFWP_MATCH_NOT_EQUAL + 1
-	cFWP_MATCH_NOT_PREFIX             wtFwpMatchType = cFWP_MATCH_PREFIX + 1
-	cFWP_MATCH_TYPE_MAX               wtFwpMatchType = cFWP_MATCH_NOT_PREFIX + 1
-)
-
-// FWPM_ACTION0 defined in fwpmtypes.h
-// (https://docs.microsoft.com/en-us/windows/desktop/api/fwpmtypes/ns-fwpmtypes-fwpm_action0_)
-type wtFwpmAction0 struct {
-	_type      wtFwpActionType
-	filterType windows.GUID // Windows type: GUID
-}
-
-// Defined in fwpmu.h. 4cd62a49-59c3-4969-b7f3-bda5d32890a4
-var cFWPM_CONDITION_IP_LOCAL_INTERFACE = windows.GUID{
-	Data1: 0x4cd62a49,
-	Data2: 0x59c3,
-	Data3: 0x4969,
-	Data4: [8]byte{0xb7, 0xf3, 0xbd, 0xa5, 0xd3, 0x28, 0x90, 0xa4},
-}
-
-// Defined in fwpmu.h. b235ae9a-1d64-49b8-a44c-5ff3d9095045
-var cFWPM_CONDITION_IP_REMOTE_ADDRESS = windows.GUID{
-	Data1: 0xb235ae9a,
-	Data2: 0x1d64,
-	Data3: 0x49b8,
-	Data4: [8]byte{0xa4, 0x4c, 0x5f, 0xf3, 0xd9, 0x09, 0x50, 0x45},
-}
-
-// Defined in fwpmu.h. 3971ef2b-623e-4f9a-8cb1-6e79b806b9a7
-var cFWPM_CONDITION_IP_PROTOCOL = windows.GUID{
-	Data1: 0x3971ef2b,
-	Data2: 0x623e,
-	Data3: 0x4f9a,
-	Data4: [8]byte{0x8c, 0xb1, 0x6e, 0x79, 0xb8, 0x06, 0xb9, 0xa7},
-}
-
-// Defined in fwpmu.h. 0c1ba1af-5765-453f-af22-a8f791ac775b
-var cFWPM_CONDITION_IP_LOCAL_PORT = windows.GUID{
-	Data1: 0x0c1ba1af,
-	Data2: 0x5765,
-	Data3: 0x453f,
-	Data4: [8]byte{0xaf, 0x22, 0xa8, 0xf7, 0x91, 0xac, 0x77, 0x5b},
-}
-
-// Defined in fwpmu.h. c35a604d-d22b-4e1a-91b4-68f674ee674b
-var cFWPM_CONDITION_IP_REMOTE_PORT = windows.GUID{
-	Data1: 0xc35a604d,
-	Data2: 0xd22b,
-	Data3: 0x4e1a,
-	Data4: [8]byte{0x91, 0xb4, 0x68, 0xf6, 0x74, 0xee, 0x67, 0x4b},
-}
-
-// Defined in fwpmu.h. d78e1e87-8644-4ea5-9437-d809ecefc971
-var cFWPM_CONDITION_ALE_APP_ID = windows.GUID{
-	Data1: 0xd78e1e87,
-	Data2: 0x8644,
-	Data3: 0x4ea5,
-	Data4: [8]byte{0x94, 0x37, 0xd8, 0x09, 0xec, 0xef, 0xc9, 0x71},
-}
-
-// af043a0a-b34d-4f86-979c-c90371af6e66
-var cFWPM_CONDITION_ALE_USER_ID = windows.GUID{
-	Data1: 0xaf043a0a,
-	Data2: 0xb34d,
-	Data3: 0x4f86,
-	Data4: [8]byte{0x97, 0x9c, 0xc9, 0x03, 0x71, 0xaf, 0x6e, 0x66},
-}
-
-// d9ee00de-c1ef-4617-bfe3-ffd8f5a08957
-var cFWPM_CONDITION_IP_LOCAL_ADDRESS = windows.GUID{
-	Data1: 0xd9ee00de,
-	Data2: 0xc1ef,
-	Data3: 0x4617,
-	Data4: [8]byte{0xbf, 0xe3, 0xff, 0xd8, 0xf5, 0xa0, 0x89, 0x57},
-}
-
-var (
-	cFWPM_CONDITION_ICMP_TYPE = cFWPM_CONDITION_IP_LOCAL_PORT
-	cFWPM_CONDITION_ICMP_CODE = cFWPM_CONDITION_IP_REMOTE_PORT
-)
-
-// 7bc43cbf-37ba-45f1-b74a-82ff518eeb10
-var cFWPM_CONDITION_L2_FLAGS = windows.GUID{
-	Data1: 0x7bc43cbf,
-	Data2: 0x37ba,
-	Data3: 0x45f1,
-	Data4: [8]byte{0xb7, 0x4a, 0x82, 0xff, 0x51, 0x8e, 0xeb, 0x10},
-}
-
-type wtFwpmL2Flags uint32
-
-const cFWP_CONDITION_L2_IS_VM2VM wtFwpmL2Flags = 0x00000010
-
-var cFWPM_CONDITION_FLAGS = windows.GUID{
-	Data1: 0x632ce23b,
-	Data2: 0x5167,
-	Data3: 0x435c,
-	Data4: [8]byte{0x86, 0xd7, 0xe9, 0x03, 0x68, 0x4a, 0xa8, 0x0c},
-}
-
-type wtFwpmFlags uint32
-
-const cFWP_CONDITION_FLAG_IS_LOOPBACK wtFwpmFlags = 0x00000001
-
-// Defined in fwpmtypes.h
-type wtFwpmFilterFlags uint32
-
-const (
-	cFWPM_FILTER_FLAG_NONE                                wtFwpmFilterFlags = 0x00000000
-	cFWPM_FILTER_FLAG_PERSISTENT                          wtFwpmFilterFlags = 0x00000001
-	cFWPM_FILTER_FLAG_BOOTTIME                            wtFwpmFilterFlags = 0x00000002
-	cFWPM_FILTER_FLAG_HAS_PROVIDER_CONTEXT                wtFwpmFilterFlags = 0x00000004
-	cFWPM_FILTER_FLAG_CLEAR_ACTION_RIGHT                  wtFwpmFilterFlags = 0x00000008
-	cFWPM_FILTER_FLAG_PERMIT_IF_CALLOUT_UNREGISTERED      wtFwpmFilterFlags = 0x00000010
-	cFWPM_FILTER_FLAG_DISABLED                            wtFwpmFilterFlags = 0x00000020
-	cFWPM_FILTER_FLAG_INDEXED                             wtFwpmFilterFlags = 0x00000040
-	cFWPM_FILTER_FLAG_HAS_SECURITY_REALM_PROVIDER_CONTEXT wtFwpmFilterFlags = 0x00000080
-	cFWPM_FILTER_FLAG_SYSTEMOS_ONLY                       wtFwpmFilterFlags = 0x00000100
-	cFWPM_FILTER_FLAG_GAMEOS_ONLY                         wtFwpmFilterFlags = 0x00000200
-	cFWPM_FILTER_FLAG_SILENT_MODE                         wtFwpmFilterFlags = 0x00000400
-	cFWPM_FILTER_FLAG_IPSEC_NO_ACQUIRE_INITIATE           wtFwpmFilterFlags = 0x00000800
-)
-
-// FWPM_LAYER_ALE_AUTH_CONNECT_V4 (c38d57d1-05a7-4c33-904f-7fbceee60e82) defined in fwpmu.h
-var cFWPM_LAYER_ALE_AUTH_CONNECT_V4 = windows.GUID{
-	Data1: 0xc38d57d1,
-	Data2: 0x05a7,
-	Data3: 0x4c33,
-	Data4: [8]byte{0x90, 0x4f, 0x7f, 0xbc, 0xee, 0xe6, 0x0e, 0x82},
-}
-
-// e1cd9fe7-f4b5-4273-96c0-592e487b8650
-var cFWPM_LAYER_ALE_AUTH_RECV_ACCEPT_V4 = windows.GUID{
-	Data1: 0xe1cd9fe7,
-	Data2: 0xf4b5,
-	Data3: 0x4273,
-	Data4: [8]byte{0x96, 0xc0, 0x59, 0x2e, 0x48, 0x7b, 0x86, 0x50},
-}
-
-// FWPM_LAYER_ALE_AUTH_CONNECT_V6 (4a72393b-319f-44bc-84c3-ba54dcb3b6b4) defined in fwpmu.h
-var cFWPM_LAYER_ALE_AUTH_CONNECT_V6 = windows.GUID{
-	Data1: 0x4a72393b,
-	Data2: 0x319f,
-	Data3: 0x44bc,
-	Data4: [8]byte{0x84, 0xc3, 0xba, 0x54, 0xdc, 0xb3, 0xb6, 0xb4},
-}
-
-// a3b42c97-9f04-4672-b87e-cee9c483257f
-var cFWPM_LAYER_ALE_AUTH_RECV_ACCEPT_V6 = windows.GUID{
-	Data1: 0xa3b42c97,
-	Data2: 0x9f04,
-	Data3: 0x4672,
-	Data4: [8]byte{0xb8, 0x7e, 0xce, 0xe9, 0xc4, 0x83, 0x25, 0x7f},
-}
-
-// 94c44912-9d6f-4ebf-b995-05ab8a088d1b
-var cFWPM_LAYER_OUTBOUND_MAC_FRAME_NATIVE = windows.GUID{
-	Data1: 0x94c44912,
-	Data2: 0x9d6f,
-	Data3: 0x4ebf,
-	Data4: [8]byte{0xb9, 0x95, 0x05, 0xab, 0x8a, 0x08, 0x8d, 0x1b},
-}
-
-// d4220bd3-62ce-4f08-ae88-b56e8526df50
-var cFWPM_LAYER_INBOUND_MAC_FRAME_NATIVE = windows.GUID{
-	Data1: 0xd4220bd3,
-	Data2: 0x62ce,
-	Data3: 0x4f08,
-	Data4: [8]byte{0xae, 0x88, 0xb5, 0x6e, 0x85, 0x26, 0xdf, 0x50},
-}
-
-// FWP_BITMAP_ARRAY64 defined in fwtypes.h
-type wtFwpBitmapArray64 struct {
-	bitmapArray64 [8]uint8 // Windows type: [8]UINT8
-}
-
-// FWP_BYTE_ARRAY6 defined in fwtypes.h
-// (https://docs.microsoft.com/en-us/windows/desktop/api/fwptypes/ns-fwptypes-fwp_byte_array6_)
-type wtFwpByteArray6 struct {
-	byteArray6 [6]uint8 // Windows type: [6]UINT8
-}
-
-// FWP_BYTE_ARRAY16 defined in fwptypes.h
-// (https://docs.microsoft.com/en-us/windows/desktop/api/fwptypes/ns-fwptypes-fwp_byte_array16_)
-type wtFwpByteArray16 struct {
-	byteArray16 [16]uint8 // Windows type [16]UINT8
-}
-
-// FWP_CONDITION_VALUE0 defined in fwptypes.h
-// (https://docs.microsoft.com/en-us/windows/desktop/api/fwptypes/ns-fwptypes-fwp_condition_value0).
-type wtFwpConditionValue0 wtFwpValue0
-
-// FWP_DATA_TYPE defined in fwptypes.h
-// (https://docs.microsoft.com/en-us/windows/desktop/api/fwptypes/ne-fwptypes-fwp_data_type_)
-type wtFwpDataType uint
-
-const (
-	cFWP_EMPTY                         wtFwpDataType = 0
-	cFWP_UINT8                         wtFwpDataType = cFWP_EMPTY + 1
-	cFWP_UINT16                        wtFwpDataType = cFWP_UINT8 + 1
-	cFWP_UINT32                        wtFwpDataType = cFWP_UINT16 + 1
-	cFWP_UINT64                        wtFwpDataType = cFWP_UINT32 + 1
-	cFWP_INT8                          wtFwpDataType = cFWP_UINT64 + 1
-	cFWP_INT16                         wtFwpDataType = cFWP_INT8 + 1
-	cFWP_INT32                         wtFwpDataType = cFWP_INT16 + 1
-	cFWP_INT64                         wtFwpDataType = cFWP_INT32 + 1
-	cFWP_FLOAT                         wtFwpDataType = cFWP_INT64 + 1
-	cFWP_DOUBLE                        wtFwpDataType = cFWP_FLOAT + 1
-	cFWP_BYTE_ARRAY16_TYPE             wtFwpDataType = cFWP_DOUBLE + 1
-	cFWP_BYTE_BLOB_TYPE                wtFwpDataType = cFWP_BYTE_ARRAY16_TYPE + 1
-	cFWP_SID                           wtFwpDataType = cFWP_BYTE_BLOB_TYPE + 1
-	cFWP_SECURITY_DESCRIPTOR_TYPE      wtFwpDataType = cFWP_SID + 1
-	cFWP_TOKEN_INFORMATION_TYPE        wtFwpDataType = cFWP_SECURITY_DESCRIPTOR_TYPE + 1
-	cFWP_TOKEN_ACCESS_INFORMATION_TYPE wtFwpDataType = cFWP_TOKEN_INFORMATION_TYPE + 1
-	cFWP_UNICODE_STRING_TYPE           wtFwpDataType = cFWP_TOKEN_ACCESS_INFORMATION_TYPE + 1
-	cFWP_BYTE_ARRAY6_TYPE              wtFwpDataType = cFWP_UNICODE_STRING_TYPE + 1
-	cFWP_BITMAP_INDEX_TYPE             wtFwpDataType = cFWP_BYTE_ARRAY6_TYPE + 1
-	cFWP_BITMAP_ARRAY64_TYPE           wtFwpDataType = cFWP_BITMAP_INDEX_TYPE + 1
-	cFWP_SINGLE_DATA_TYPE_MAX          wtFwpDataType = 0xff
-	cFWP_V4_ADDR_MASK                  wtFwpDataType = cFWP_SINGLE_DATA_TYPE_MAX + 1
-	cFWP_V6_ADDR_MASK                  wtFwpDataType = cFWP_V4_ADDR_MASK + 1
-	cFWP_RANGE_TYPE                    wtFwpDataType = cFWP_V6_ADDR_MASK + 1
-	cFWP_DATA_TYPE_MAX                 wtFwpDataType = cFWP_RANGE_TYPE + 1
-)
-
-// FWP_V4_ADDR_AND_MASK defined in fwptypes.h
-// (https://docs.microsoft.com/en-us/windows/desktop/api/fwptypes/ns-fwptypes-fwp_v4_addr_and_mask).
-type wtFwpV4AddrAndMask struct {
-	addr uint32
-	mask uint32
-}
-
-// FWP_V6_ADDR_AND_MASK defined in fwptypes.h
-// (https://docs.microsoft.com/en-us/windows/desktop/api/fwptypes/ns-fwptypes-fwp_v6_addr_and_mask).
-type wtFwpV6AddrAndMask struct {
-	addr         [16]uint8
-	prefixLength uint8
-}
-
-// FWP_VALUE0 defined in fwptypes.h
-// (https://docs.microsoft.com/en-us/windows/desktop/api/fwptypes/ns-fwptypes-fwp_value0_)
-type wtFwpValue0 struct {
-	_type wtFwpDataType
-	value uintptr
-}
-
-// FWPM_DISPLAY_DATA0 defined in fwptypes.h
-// (https://docs.microsoft.com/en-us/windows/desktop/api/fwptypes/ns-fwptypes-fwpm_display_data0).
-type wtFwpmDisplayData0 struct {
-	name        *uint16 // Windows type: *wchar_t
-	description *uint16 // Windows type: *wchar_t
-}
-
-// FWPM_FILTER_CONDITION0 defined in fwpmtypes.h
-// (https://docs.microsoft.com/en-us/windows/desktop/api/fwpmtypes/ns-fwpmtypes-fwpm_filter_condition0).
-type wtFwpmFilterCondition0 struct {
-	fieldKey       windows.GUID // Windows type: GUID
-	matchType      wtFwpMatchType
-	conditionValue wtFwpConditionValue0
-}
-
-// FWPM_PROVIDER0 defined in fwpmtypes.h
-// (https://docs.microsoft.com/en-us/windows/desktop/api/fwpmtypes/ns-fwpmtypes-fwpm_provider0_)
-type wtFwpProvider0 struct {
-	providerKey  windows.GUID // Windows type: GUID
-	displayData  wtFwpmDisplayData0
-	flags        uint32
-	providerData wtFwpByteBlob
-	serviceName  *uint16 // Windows type: *wchar_t
-}
-
-type wtFwpmSessionFlagsValue uint32
-
-const (
-	cFWPM_SESSION_FLAG_DYNAMIC wtFwpmSessionFlagsValue = 0x00000001 // FWPM_SESSION_FLAG_DYNAMIC defined in fwpmtypes.h
-)
-
-// FWPM_SESSION0 defined in fwpmtypes.h
-// (https://docs.microsoft.com/en-us/windows/desktop/api/fwpmtypes/ns-fwpmtypes-fwpm_session0).
-type wtFwpmSession0 struct {
-	sessionKey           windows.GUID // Windows type: GUID
-	displayData          wtFwpmDisplayData0
-	flags                wtFwpmSessionFlagsValue // Windows type UINT32
-	txnWaitTimeoutInMSec uint32
-	processId            uint32 // Windows type: DWORD
-	sid                  *windows.SID
-	username             *uint16 // Windows type: *wchar_t
-	kernelMode           uint8   // Windows type: BOOL
-}
-
-type wtFwpmSublayerFlags uint32
-
-const (
-	cFWPM_SUBLAYER_FLAG_PERSISTENT wtFwpmSublayerFlags = 0x00000001 // FWPM_SUBLAYER_FLAG_PERSISTENT defined in fwpmtypes.h
-)
-
-// FWPM_SUBLAYER0 defined in fwpmtypes.h
-// (https://docs.microsoft.com/en-us/windows/desktop/api/fwpmtypes/ns-fwpmtypes-fwpm_sublayer0_)
-type wtFwpmSublayer0 struct {
-	subLayerKey  windows.GUID // Windows type: GUID
-	displayData  wtFwpmDisplayData0
-	flags        wtFwpmSublayerFlags
-	providerKey  *windows.GUID // Windows type: *GUID
-	providerData wtFwpByteBlob
-	weight       uint16
-}
-
-// Defined in rpcdce.h
-type wtRpcCAuthN uint32
-
-const (
-	cRPC_C_AUTHN_NONE    wtRpcCAuthN = 0
-	cRPC_C_AUTHN_WINNT   wtRpcCAuthN = 10
-	cRPC_C_AUTHN_DEFAULT wtRpcCAuthN = 0xFFFFFFFF
-)
-
-// FWPM_PROVIDER0 defined in fwpmtypes.h
-// (https://docs.microsoft.com/sv-se/windows/desktop/api/fwpmtypes/ns-fwpmtypes-fwpm_provider0).
-type wtFwpmProvider0 struct {
-	providerKey  windows.GUID
-	displayData  wtFwpmDisplayData0
-	flags        uint32
-	providerData wtFwpByteBlob
-	serviceName  *uint16
-}
-
-type wtIPProto uint32
-
-const (
-	cIPPROTO_ICMP   wtIPProto = 1
-	cIPPROTO_ICMPV6 wtIPProto = 58
-	cIPPROTO_TCP    wtIPProto = 6
-	cIPPROTO_UDP    wtIPProto = 17
-)
-
-const (
-	cFWP_ACTRL_MATCH_FILTER = 1
-)

client/internal/dns/dnsfw/types_windows_32.go

@@ -1,92 +0,0 @@
-//go:build windows && (386 || arm)
-
-/* SPDX-License-Identifier: MIT
- *
- * Copyright (C) 2019-2021 WireGuard LLC. All Rights Reserved.
- *
- * Adapted from wireguard-windows tunnel/firewall/types_windows_32.go.
- */
-
-package dnsfw
-
-import "golang.org/x/sys/windows"
-
-const (
-	wtFwpByteBlob_Size        = 8
-	wtFwpByteBlob_data_Offset = 4
-
-	wtFwpConditionValue0_Size         = 8
-	wtFwpConditionValue0_uint8_Offset = 4
-
-	wtFwpmDisplayData0_Size               = 8
-	wtFwpmDisplayData0_description_Offset = 4
-
-	wtFwpmFilter0_Size                       = 152
-	wtFwpmFilter0_displayData_Offset         = 16
-	wtFwpmFilter0_flags_Offset               = 24
-	wtFwpmFilter0_providerKey_Offset         = 28
-	wtFwpmFilter0_providerData_Offset        = 32
-	wtFwpmFilter0_layerKey_Offset            = 40
-	wtFwpmFilter0_subLayerKey_Offset         = 56
-	wtFwpmFilter0_weight_Offset              = 72
-	wtFwpmFilter0_numFilterConditions_Offset = 80
-	wtFwpmFilter0_filterCondition_Offset     = 84
-	wtFwpmFilter0_action_Offset              = 88
-	wtFwpmFilter0_providerContextKey_Offset  = 112
-	wtFwpmFilter0_reserved_Offset            = 128
-	wtFwpmFilter0_filterID_Offset            = 136
-	wtFwpmFilter0_effectiveWeight_Offset     = 144
-
-	wtFwpmFilterCondition0_Size                  = 28
-	wtFwpmFilterCondition0_matchType_Offset      = 16
-	wtFwpmFilterCondition0_conditionValue_Offset = 20
-
-	wtFwpmSession0_Size                        = 48
-	wtFwpmSession0_displayData_Offset          = 16
-	wtFwpmSession0_flags_Offset                = 24
-	wtFwpmSession0_txnWaitTimeoutInMSec_Offset = 28
-	wtFwpmSession0_processId_Offset            = 32
-	wtFwpmSession0_sid_Offset                  = 36
-	wtFwpmSession0_username_Offset             = 40
-	wtFwpmSession0_kernelMode_Offset           = 44
-
-	wtFwpmSublayer0_Size                = 44
-	wtFwpmSublayer0_displayData_Offset  = 16
-	wtFwpmSublayer0_flags_Offset        = 24
-	wtFwpmSublayer0_providerKey_Offset  = 28
-	wtFwpmSublayer0_providerData_Offset = 32
-	wtFwpmSublayer0_weight_Offset       = 40
-
-	wtFwpProvider0_Size                = 40
-	wtFwpProvider0_displayData_Offset  = 16
-	wtFwpProvider0_flags_Offset        = 24
-	wtFwpProvider0_providerData_Offset = 28
-	wtFwpProvider0_serviceName_Offset  = 36
-
-	wtFwpTokenInformation_Size = 16
-
-	wtFwpValue0_Size         = 8
-	wtFwpValue0_value_Offset = 4
-)
-
-// FWPM_FILTER0 defined in fwpmtypes.h
-// (https://docs.microsoft.com/en-us/windows/desktop/api/fwpmtypes/ns-fwpmtypes-fwpm_filter0).
-type wtFwpmFilter0 struct {
-	filterKey           windows.GUID // Windows type: GUID
-	displayData         wtFwpmDisplayData0
-	flags               wtFwpmFilterFlags
-	providerKey         *windows.GUID // Windows type: *GUID
-	providerData        wtFwpByteBlob
-	layerKey            windows.GUID // Windows type: GUID
-	subLayerKey         windows.GUID // Windows type: GUID
-	weight              wtFwpValue0
-	numFilterConditions uint32
-	filterCondition     *wtFwpmFilterCondition0
-	action              wtFwpmAction0
-	offset1             [4]byte       // Layout correction field
-	providerContextKey  windows.GUID  // Windows type: GUID
-	reserved            *windows.GUID // Windows type: *GUID
-	offset2             [4]byte       // Layout correction field
-	filterID            uint64
-	effectiveWeight     wtFwpValue0
-}

client/internal/dns/dnsfw/types_windows_64.go

@@ -1,89 +0,0 @@
-//go:build windows && (amd64 || arm64)
-
-/* SPDX-License-Identifier: MIT
- *
- * Copyright (C) 2019-2021 WireGuard LLC. All Rights Reserved.
- *
- * Adapted from wireguard-windows tunnel/firewall/types_windows_64.go.
- */
-
-package dnsfw
-
-import "golang.org/x/sys/windows"
-
-const (
-	wtFwpByteBlob_Size        = 16
-	wtFwpByteBlob_data_Offset = 8
-
-	wtFwpConditionValue0_Size         = 16
-	wtFwpConditionValue0_uint8_Offset = 8
-
-	wtFwpmDisplayData0_Size               = 16
-	wtFwpmDisplayData0_description_Offset = 8
-
-	wtFwpmFilter0_Size                       = 200
-	wtFwpmFilter0_displayData_Offset         = 16
-	wtFwpmFilter0_flags_Offset               = 32
-	wtFwpmFilter0_providerKey_Offset         = 40
-	wtFwpmFilter0_providerData_Offset        = 48
-	wtFwpmFilter0_layerKey_Offset            = 64
-	wtFwpmFilter0_subLayerKey_Offset         = 80
-	wtFwpmFilter0_weight_Offset              = 96
-	wtFwpmFilter0_numFilterConditions_Offset = 112
-	wtFwpmFilter0_filterCondition_Offset     = 120
-	wtFwpmFilter0_action_Offset              = 128
-	wtFwpmFilter0_providerContextKey_Offset  = 152
-	wtFwpmFilter0_reserved_Offset            = 168
-	wtFwpmFilter0_filterID_Offset            = 176
-	wtFwpmFilter0_effectiveWeight_Offset     = 184
-
-	wtFwpmFilterCondition0_Size                  = 40
-	wtFwpmFilterCondition0_matchType_Offset      = 16
-	wtFwpmFilterCondition0_conditionValue_Offset = 24
-
-	wtFwpmSession0_Size                        = 72
-	wtFwpmSession0_displayData_Offset          = 16
-	wtFwpmSession0_flags_Offset                = 32
-	wtFwpmSession0_txnWaitTimeoutInMSec_Offset = 36
-	wtFwpmSession0_processId_Offset            = 40
-	wtFwpmSession0_sid_Offset                  = 48
-	wtFwpmSession0_username_Offset             = 56
-	wtFwpmSession0_kernelMode_Offset           = 64
-
-	wtFwpmSublayer0_Size                = 72
-	wtFwpmSublayer0_displayData_Offset  = 16
-	wtFwpmSublayer0_flags_Offset        = 32
-	wtFwpmSublayer0_providerKey_Offset  = 40
-	wtFwpmSublayer0_providerData_Offset = 48
-	wtFwpmSublayer0_weight_Offset       = 64
-
-	wtFwpProvider0_Size                = 64
-	wtFwpProvider0_displayData_Offset  = 16
-	wtFwpProvider0_flags_Offset        = 32
-	wtFwpProvider0_providerData_Offset = 40
-	wtFwpProvider0_serviceName_Offset  = 56
-
-	wtFwpValue0_Size         = 16
-	wtFwpValue0_value_Offset = 8
-)
-
-// FWPM_FILTER0 defined in fwpmtypes.h
-// (https://docs.microsoft.com/en-us/windows/desktop/api/fwpmtypes/ns-fwpmtypes-fwpm_filter0).
-type wtFwpmFilter0 struct {
-	filterKey           windows.GUID // Windows type: GUID
-	displayData         wtFwpmDisplayData0
-	flags               wtFwpmFilterFlags // Windows type: UINT32
-	providerKey         *windows.GUID     // Windows type: *GUID
-	providerData        wtFwpByteBlob
-	layerKey            windows.GUID // Windows type: GUID
-	subLayerKey         windows.GUID // Windows type: GUID
-	weight              wtFwpValue0
-	numFilterConditions uint32
-	filterCondition     *wtFwpmFilterCondition0
-	action              wtFwpmAction0
-	offset1             [4]byte       // Layout correction field
-	providerContextKey  windows.GUID  // Windows type: GUID
-	reserved            *windows.GUID // Windows type: *GUID
-	filterID            uint64
-	effectiveWeight     wtFwpValue0
-}

client/internal/dns/dnsfw/zsyscall_windows.go

@@ -1,130 +0,0 @@
-// Code generated by 'go generate'; DO NOT EDIT.
-
-package dnsfw
-
-import (
-	"syscall"
-	"unsafe"
-
-	"golang.org/x/sys/windows"
-)
-
-var _ unsafe.Pointer
-
-// Do the interface allocations only once for common
-// Errno values.
-const (
-	errnoERROR_IO_PENDING = 997
-)
-
-var (
-	errERROR_IO_PENDING error = syscall.Errno(errnoERROR_IO_PENDING)
-	errERROR_EINVAL     error = syscall.EINVAL
-)
-
-// errnoErr returns common boxed Errno values, to prevent
-// allocations at runtime.
-func errnoErr(e syscall.Errno) error {
-	switch e {
-	case 0:
-		return errERROR_EINVAL
-	case errnoERROR_IO_PENDING:
-		return errERROR_IO_PENDING
-	}
-	// TODO: add more here, after collecting data on the common
-	// error values see on Windows. (perhaps when running
-	// all.bat?)
-	return e
-}
-
-var (
-	modfwpuclnt = windows.NewLazySystemDLL("fwpuclnt.dll")
-
-	procFwpmEngineClose0          = modfwpuclnt.NewProc("FwpmEngineClose0")
-	procFwpmEngineOpen0           = modfwpuclnt.NewProc("FwpmEngineOpen0")
-	procFwpmFilterAdd0            = modfwpuclnt.NewProc("FwpmFilterAdd0")
-	procFwpmFreeMemory0           = modfwpuclnt.NewProc("FwpmFreeMemory0")
-	procFwpmGetAppIdFromFileName0 = modfwpuclnt.NewProc("FwpmGetAppIdFromFileName0")
-	procFwpmProviderAdd0          = modfwpuclnt.NewProc("FwpmProviderAdd0")
-	procFwpmSubLayerAdd0          = modfwpuclnt.NewProc("FwpmSubLayerAdd0")
-	procFwpmTransactionAbort0     = modfwpuclnt.NewProc("FwpmTransactionAbort0")
-	procFwpmTransactionBegin0     = modfwpuclnt.NewProc("FwpmTransactionBegin0")
-	procFwpmTransactionCommit0    = modfwpuclnt.NewProc("FwpmTransactionCommit0")
-)
-
-func fwpmEngineClose0(engineHandle uintptr) (err error) {
-	r1, _, e1 := syscall.Syscall(procFwpmEngineClose0.Addr(), 1, uintptr(engineHandle), 0, 0)
-	if r1 != 0 {
-		err = errnoErr(e1)
-	}
-	return
-}
-
-func fwpmEngineOpen0(serverName *uint16, authnService wtRpcCAuthN, authIdentity *uintptr, session *wtFwpmSession0, engineHandle unsafe.Pointer) (err error) {
-	r1, _, e1 := syscall.Syscall6(procFwpmEngineOpen0.Addr(), 5, uintptr(unsafe.Pointer(serverName)), uintptr(authnService), uintptr(unsafe.Pointer(authIdentity)), uintptr(unsafe.Pointer(session)), uintptr(engineHandle), 0)
-	if r1 != 0 {
-		err = errnoErr(e1)
-	}
-	return
-}
-
-func fwpmFilterAdd0(engineHandle uintptr, filter *wtFwpmFilter0, sd uintptr, id *uint64) (err error) {
-	r1, _, e1 := syscall.Syscall6(procFwpmFilterAdd0.Addr(), 4, uintptr(engineHandle), uintptr(unsafe.Pointer(filter)), uintptr(sd), uintptr(unsafe.Pointer(id)), 0, 0)
-	if r1 != 0 {
-		err = errnoErr(e1)
-	}
-	return
-}
-
-func fwpmFreeMemory0(p unsafe.Pointer) {
-	syscall.Syscall(procFwpmFreeMemory0.Addr(), 1, uintptr(p), 0, 0)
-	return
-}
-
-func fwpmGetAppIdFromFileName0(fileName *uint16, appID unsafe.Pointer) (err error) {
-	r1, _, e1 := syscall.Syscall(procFwpmGetAppIdFromFileName0.Addr(), 2, uintptr(unsafe.Pointer(fileName)), uintptr(appID), 0)
-	if r1 != 0 {
-		err = errnoErr(e1)
-	}
-	return
-}
-
-func fwpmProviderAdd0(engineHandle uintptr, provider *wtFwpmProvider0, sd uintptr) (err error) {
-	r1, _, e1 := syscall.Syscall(procFwpmProviderAdd0.Addr(), 3, uintptr(engineHandle), uintptr(unsafe.Pointer(provider)), uintptr(sd))
-	if r1 != 0 {
-		err = errnoErr(e1)
-	}
-	return
-}
-
-func fwpmSubLayerAdd0(engineHandle uintptr, subLayer *wtFwpmSublayer0, sd uintptr) (err error) {
-	r1, _, e1 := syscall.Syscall(procFwpmSubLayerAdd0.Addr(), 3, uintptr(engineHandle), uintptr(unsafe.Pointer(subLayer)), uintptr(sd))
-	if r1 != 0 {
-		err = errnoErr(e1)
-	}
-	return
-}
-
-func fwpmTransactionAbort0(engineHandle uintptr) (err error) {
-	r1, _, e1 := syscall.Syscall(procFwpmTransactionAbort0.Addr(), 1, uintptr(engineHandle), 0, 0)
-	if r1 != 0 {
-		err = errnoErr(e1)
-	}
-	return
-}
-
-func fwpmTransactionBegin0(engineHandle uintptr, flags uint32) (err error) {
-	r1, _, e1 := syscall.Syscall(procFwpmTransactionBegin0.Addr(), 2, uintptr(engineHandle), uintptr(flags), 0)
-	if r1 != 0 {
-		err = errnoErr(e1)
-	}
-	return
-}
-
-func fwpmTransactionCommit0(engineHandle uintptr) (err error) {
-	r1, _, e1 := syscall.Syscall(procFwpmTransactionCommit0.Addr(), 1, uintptr(engineHandle), 0, 0)
-	if r1 != 0 {
-		err = errnoErr(e1)
-	}
-	return
-}

client/internal/dns/handler_chain.go

@@ -339,8 +339,7 @@ func (c *HandlerChain) isHandlerMatch(qname string, entry HandlerEntry) bool {
 	case entry.Pattern == ".":
 		return true
 	case entry.IsWildcard:
-		parts := strings.Split(strings.TrimSuffix(qname, entry.Pattern), ".")
-		return len(parts) >= 2 && strings.HasSuffix(qname, entry.Pattern)
+		return strings.HasSuffix(qname, "."+entry.Pattern)
 	default:
 		// For non-wildcard patterns:
 		// If handler wants subdomain matching, allow suffix match

client/internal/dns/handler_chain_test.go

@@ -164,6 +164,54 @@ func TestHandlerChain_ServeDNS_DomainMatching(t *testing.T) {
 			matchSubdomains: true,
 			shouldMatch:     true,
 		},
+		{
+			name:            "wildcard label-boundary mismatch (suffix overlap)",
+			handlerDomain:   "*.b.test.",
+			queryDomain:     "x.ab.test.",
+			isWildcard:      true,
+			matchSubdomains: false,
+			shouldMatch:     false,
+		},
+		{
+			name:            "wildcard label-boundary match",
+			handlerDomain:   "*.b.test.",
+			queryDomain:     "x.b.test.",
+			isWildcard:      true,
+			matchSubdomains: false,
+			shouldMatch:     true,
+		},
+		{
+			name:            "wildcard multi-label match",
+			handlerDomain:   "*.b.test.",
+			queryDomain:     "x.y.b.test.",
+			isWildcard:      true,
+			matchSubdomains: false,
+			shouldMatch:     true,
+		},
+		{
+			name:            "wildcard no match on multi-label apex",
+			handlerDomain:   "*.b.test.",
+			queryDomain:     "b.test.",
+			isWildcard:      true,
+			matchSubdomains: false,
+			shouldMatch:     false,
+		},
+		{
+			name:            "wildcard no match on unrelated suffix containment",
+			handlerDomain:   "*.example.com.",
+			queryDomain:     "notexample.com.",
+			isWildcard:      true,
+			matchSubdomains: false,
+			shouldMatch:     false,
+		},
+		{
+			name:            "wildcard accepts pattern registered without trailing dot",
+			handlerDomain:   "*.b.test",
+			queryDomain:     "x.b.test.",
+			isWildcard:      true,
+			matchSubdomains: false,
+			shouldMatch:     true,
+		},
 	}
 
 	for _, tt := range tests {
@@ -273,6 +321,19 @@ func TestHandlerChain_ServeDNS_OverlappingDomains(t *testing.T) {
 			expectedCalls:   1,
 			expectedHandler: 2, // highest priority matching handler should be called
 		},
+		{
+			name: "overlapping wildcard suffixes route to correct handler",
+			handlers: []struct {
+				pattern  string
+				priority int
+			}{
+				{pattern: "*.b.test.", priority: nbdns.PriorityDNSRoute},
+				{pattern: "*.ab.test.", priority: nbdns.PriorityDNSRoute},
+			},
+			queryDomain:     "app.ab.test.",
+			expectedCalls:   1,
+			expectedHandler: 1,
+		},
 		{
 			name: "root zone with specific domain",
 			handlers: []struct {

client/internal/dns/host_windows.go

@@ -17,7 +17,6 @@ import (
 	"golang.org/x/sys/windows/registry"
 
 	nberrors "github.com/netbirdio/netbird/client/errors"
-	"github.com/netbirdio/netbird/client/internal/dns/dnsfw"
 	"github.com/netbirdio/netbird/client/internal/statemanager"
 	"github.com/netbirdio/netbird/client/internal/winregistry"
 )
@@ -75,7 +74,6 @@ type registryConfigurator struct {
 	routingAll      bool
 	gpo             bool
 	nrptEntryCount  int
-	dnsFirewall     dnsfw.Manager
 	origNameservers []netip.Addr
 }
 
@@ -96,9 +94,8 @@ func newHostManager(wgInterface WGIface) (*registryConfigurator, error) {
 	}
 
 	configurator := &registryConfigurator{
-		guid:        guid,
-		gpo:         useGPO,
-		dnsFirewall: dnsfw.New(),
+		guid: guid,
+		gpo:  useGPO,
 	}
 
 	origNameservers, err := configurator.captureOriginalNameservers()
@@ -279,8 +276,16 @@ func (r *registryConfigurator) disableWINSForInterface() error {
 }
 
 func (r *registryConfigurator) applyDNSConfig(config HostDNSConfig, stateManager *statemanager.Manager) error {
-	if err := r.applyRouteAll(config); err != nil {
-		return err
+	if config.RouteAll {
+		if err := r.addDNSSetupForAll(config.ServerIP); err != nil {
+			return fmt.Errorf("add dns setup: %w", err)
+		}
+	} else if r.routingAll {
+		if err := r.deleteInterfaceRegistryKeyProperty(interfaceConfigNameServerKey); err != nil {
+			return fmt.Errorf("delete interface registry key property: %w", err)
+		}
+		r.routingAll = false
+		log.Infof("removed %s as main DNS forwarder for this peer", config.ServerIP)
 	}
 
 	r.updateState(stateManager)
@@ -296,13 +301,6 @@ func (r *registryConfigurator) applyDNSConfig(config HostDNSConfig, stateManager
 		matchDomains = append(matchDomains, "."+strings.TrimSuffix(dConf.Domain, "."))
 	}
 
-	// In RouteAll mode, install an NRPT root-zone rule so the system DNS client
-	// steers every query to the NetBird resolver even if the per-interface
-	// NameServer setting is bypassed or overridden by another adapter.
-	if config.RouteAll {
-		matchDomains = append(matchDomains, ".")
-	}
-
 	if err := r.removeDNSMatchPolicies(); err != nil {
 		log.Errorf("cleanup old dns match policies: %s", err)
 	}
@@ -329,35 +327,6 @@ func (r *registryConfigurator) applyDNSConfig(config HostDNSConfig, stateManager
 	return nil
 }
 
-func (r *registryConfigurator) applyRouteAll(config HostDNSConfig) error {
-	if config.RouteAll {
-		if err := r.dnsFirewall.Enable(r.guid, config.ServerIP); err != nil {
-			return fmt.Errorf("dns firewall: %w", err)
-		}
-		if err := r.addDNSSetupForAll(config.ServerIP); err != nil {
-			merr := multierror.Append(nil, fmt.Errorf("add dns setup: %w", err))
-			if dErr := r.dnsFirewall.Disable(); dErr != nil {
-				merr = multierror.Append(merr, fmt.Errorf("rollback dns firewall: %w", dErr))
-			}
-			return nberrors.FormatErrorOrNil(merr)
-		}
-		return nil
-	}
-
-	if err := r.dnsFirewall.Disable(); err != nil {
-		log.Errorf("disable dns firewall: %v", err)
-	}
-	if !r.routingAll {
-		return nil
-	}
-	if err := r.deleteInterfaceRegistryKeyProperty(interfaceConfigNameServerKey); err != nil {
-		return fmt.Errorf("delete interface registry key property: %w", err)
-	}
-	r.routingAll = false
-	log.Infof("removed %s as main DNS forwarder for this peer", config.ServerIP)
-	return nil
-}
-
 func (r *registryConfigurator) updateState(stateManager *statemanager.Manager) {
 	if err := stateManager.UpdateState(&ShutdownState{
 		Guid:           r.guid,
@@ -544,10 +513,6 @@ func (r *registryConfigurator) restoreHostDNS() error {
 		return fmt.Errorf("remove interface registry key: %w", err)
 	}
 
-	if err := r.dnsFirewall.Disable(); err != nil {
-		log.Errorf("disable dns firewall: %v", err)
-	}
-
 	go r.flushDNSCache()
 
 	return nil

client/internal/dns/host_windows_test.go

@@ -8,8 +8,6 @@ import (
 	"github.com/stretchr/testify/assert"
 	"github.com/stretchr/testify/require"
 	"golang.org/x/sys/windows/registry"
-
-	"github.com/netbirdio/netbird/client/internal/dns/dnsfw"
 )
 
 // TestNRPTEntriesCleanupOnConfigChange tests that old NRPT entries are properly cleaned up
@@ -36,9 +34,8 @@ func TestNRPTEntriesCleanupOnConfigChange(t *testing.T) {
 	}()
 
 	cfg := &registryConfigurator{
-		guid:        testGUID,
-		gpo:         false,
-		dnsFirewall: dnsfw.New(),
+		guid: testGUID,
+		gpo:  false,
 	}
 
 	// Create 125 domains which will result in 3 NRPT rules (50+50+25)
@@ -137,9 +134,8 @@ func TestNRPTDomainBatching(t *testing.T) {
 	}()
 
 	cfg := &registryConfigurator{
-		guid:        testGUID,
-		gpo:         false,
-		dnsFirewall: dnsfw.New(),
+		guid: testGUID,
+		gpo:  false,
 	}
 
 	testCases := []struct {

client/internal/dns/local/local.go

@@ -26,6 +26,19 @@ type resolver interface {
 	LookupNetIP(ctx context.Context, network, host string) ([]netip.Addr, error)
 }
 
+// PeerConnectivity reports whether a tunnel IP belongs to a peer the
+// client knows about and whether that peer is currently connected. The
+// local resolver uses this to suppress A/AAAA answers whose RDATA points
+// at a disconnected peer (typical case: a synthesized private-service
+// record pointing at an embedded proxy peer that just went offline).
+//
+// known=false means the IP isn't in the local peerstore at all — the
+// record is left alone (it points at something outside our mesh, e.g.
+// a non-peer upstream).
+type PeerConnectivity interface {
+	IsConnectedByIP(ip string) (known, connected bool)
+}
+
 type Resolver struct {
 	mu      sync.RWMutex
 	records map[dns.Question][]dns.RR
@@ -33,6 +46,11 @@ type Resolver struct {
 	// zones maps zone domain -> NonAuthoritative (true = non-authoritative, user-created zone)
 	zones    map[domain.Domain]bool
 	resolver resolver
+	// peerConn, when non-nil, is consulted on every A/AAAA answer to
+	// drop records pointing at disconnected peers. nil disables the
+	// filter and preserves the legacy "return whatever is registered"
+	// behaviour for callers that never wire a status source.
+	peerConn PeerConnectivity
 
 	ctx    context.Context
 	cancel context.CancelFunc
@@ -49,6 +67,15 @@ func NewResolver() *Resolver {
 	}
 }
 
+// SetPeerConnectivity wires the per-IP connectivity check used to filter
+// out A/AAAA answers pointing at disconnected peers. Pass nil to disable.
+// Safe to call multiple times; the latest value wins.
+func (d *Resolver) SetPeerConnectivity(p PeerConnectivity) {
+	d.mu.Lock()
+	defer d.mu.Unlock()
+	d.peerConn = p
+}
+
 func (d *Resolver) MatchSubdomains() bool {
 	return true
 }
@@ -95,6 +122,7 @@ func (d *Resolver) ServeDNS(w dns.ResponseWriter, r *dns.Msg) {
 	replyMessage.RecursionAvailable = true
 
 	result := d.lookupRecords(logger, question)
+	result.records = d.filterDisconnectedPeerAnswers(logger, question, result.records)
 	replyMessage.Authoritative = !result.hasExternalData
 	replyMessage.Answer = result.records
 	replyMessage.Rcode = d.determineRcode(question, result)
@@ -436,6 +464,78 @@ func (d *Resolver) logDNSError(logger *log.Entry, hostname string, qtype uint16,
 	}
 }
 
+// filterDisconnectedPeerAnswers drops A/AAAA records whose RDATA matches
+// a known but disconnected peer. The synthesized private-service zones
+// emit one A record per connected proxy peer in a cluster; when a peer
+// goes offline, the server-side refresh removes the record from the
+// next netmap, but the client may still hold the previous netmap for a
+// short window. This filter is the local belt to that braces — even on
+// the stale netmap, the resolver hides the offline target.
+//
+// Records pointing at unknown IPs (outside the local peerstore, e.g.
+// non-mesh upstreams) are never dropped. Non-A/AAAA records pass
+// through untouched.
+//
+// Escape hatch: if filtering would leave the answer empty AND at least
+// one record was filtered, the original list is returned. Better to
+// hand the client a record that may not respond than NXDOMAIN it
+// completely when every proxy peer is offline (the upstream may still
+// be reachable some other way, or the peerstore may be stale).
+func (d *Resolver) filterDisconnectedPeerAnswers(logger *log.Entry, question dns.Question, records []dns.RR) []dns.RR {
+	if len(records) < 2 {
+		return records
+	}
+	d.mu.RLock()
+	checker := d.peerConn
+	d.mu.RUnlock()
+	if checker == nil {
+		return records
+	}
+
+	kept := make([]dns.RR, 0, len(records))
+	var dropped int
+	for _, rr := range records {
+		ip := extractRecordIP(rr)
+		if ip == "" {
+			kept = append(kept, rr)
+			continue
+		}
+		known, connected := checker.IsConnectedByIP(ip)
+		if known && !connected {
+			dropped++
+			continue
+		}
+		kept = append(kept, rr)
+	}
+	if dropped == 0 {
+		return records
+	}
+	if len(kept) == 0 {
+		logger.Debugf("all %d answers for %s point at disconnected peers; returning the original list", dropped, question.Name)
+		return records
+	}
+	logger.Tracef("dropped %d disconnected-peer answer(s) for %s, returning %d", dropped, question.Name, len(kept))
+	return kept
+}
+
+// extractRecordIP returns the dotted-decimal / colon-hex IP carried by
+// an A or AAAA record, or "" for any other record type.
+func extractRecordIP(rr dns.RR) string {
+	switch r := rr.(type) {
+	case *dns.A:
+		if r.A == nil {
+			return ""
+		}
+		return r.A.String()
+	case *dns.AAAA:
+		if r.AAAA == nil {
+			return ""
+		}
+		return r.AAAA.String()
+	}
+	return ""
+}
+
 // Update replaces all zones and their records
 func (d *Resolver) Update(customZones []nbdns.CustomZone) {
 	d.mu.Lock()

client/internal/dns/local/local_test.go

@@ -30,6 +30,21 @@ func (m *mockResolver) LookupNetIP(ctx context.Context, network, host string) ([
 	return nil, nil
 }
 
+// mockPeerConnectivity returns canned (known, connected) results per IP.
+// Used by the disconnected-peer filter tests below. IPs not in the map
+// are reported as unknown so the filter leaves them alone.
+type mockPeerConnectivity struct {
+	byIP map[string]struct{ known, connected bool }
+}
+
+func (m mockPeerConnectivity) IsConnectedByIP(ip string) (known, connected bool) {
+	v, ok := m.byIP[ip]
+	if !ok {
+		return false, false
+	}
+	return v.known, v.connected
+}
+
 func TestLocalResolver_ServeDNS(t *testing.T) {
 	recordA := nbdns.SimpleRecord{
 		Name:  "peera.netbird.cloud.",
@@ -2652,3 +2667,125 @@ func BenchmarkIsInManagedZone_ManyZones(b *testing.B) {
 		resolver.isInManagedZone(qname)
 	}
 }
+
+// TestLocalResolver_FilterDisconnectedPeerAnswers verifies the
+// connectivity-aware filtering layered on top of lookupRecords:
+// when an A record's IP belongs to a known peer that's disconnected,
+// the record is dropped from the answer. Records for unknown IPs pass
+// through. If filtering would empty the answer entirely and at least
+// one record was dropped, the original list is restored (escape hatch
+// for the "all proxies offline" case).
+func TestLocalResolver_FilterDisconnectedPeerAnswers(t *testing.T) {
+	zone := "svc.cluster.netbird."
+	connectedRec := nbdns.SimpleRecord{
+		Name:  zone,
+		Type:  int(dns.TypeA),
+		Class: nbdns.DefaultClass,
+		TTL:   5,
+		RData: "100.64.0.10",
+	}
+	disconnectedRec := nbdns.SimpleRecord{
+		Name:  zone,
+		Type:  int(dns.TypeA),
+		Class: nbdns.DefaultClass,
+		TTL:   5,
+		RData: "100.64.0.11",
+	}
+	unknownRec := nbdns.SimpleRecord{
+		Name:  zone,
+		Type:  int(dns.TypeA),
+		Class: nbdns.DefaultClass,
+		TTL:   5,
+		RData: "203.0.113.5",
+	}
+
+	type ipState struct{ known, connected bool }
+	tests := []struct {
+		name        string
+		records     []nbdns.SimpleRecord
+		connByIP    map[string]ipState
+		wantInOrder []string
+	}{
+		{
+			name:    "drops disconnected peer, keeps connected",
+			records: []nbdns.SimpleRecord{connectedRec, disconnectedRec},
+			connByIP: map[string]ipState{
+				"100.64.0.10": {known: true, connected: true},
+				"100.64.0.11": {known: true, connected: false},
+			},
+			wantInOrder: []string{"100.64.0.10"},
+		},
+		{
+			name:    "unknown IPs pass through untouched",
+			records: []nbdns.SimpleRecord{unknownRec, disconnectedRec},
+			connByIP: map[string]ipState{
+				"100.64.0.11": {known: true, connected: false},
+			},
+			wantInOrder: []string{"203.0.113.5"},
+		},
+		{
+			name:    "all disconnected falls back to original list",
+			records: []nbdns.SimpleRecord{disconnectedRec, connectedRec},
+			connByIP: map[string]ipState{
+				"100.64.0.10": {known: true, connected: false},
+				"100.64.0.11": {known: true, connected: false},
+			},
+			wantInOrder: []string{"100.64.0.11", "100.64.0.10"},
+		},
+		{
+			name:        "no checker wired returns all records",
+			records:     []nbdns.SimpleRecord{connectedRec, disconnectedRec},
+			connByIP:    nil,
+			wantInOrder: []string{"100.64.0.10", "100.64.0.11"},
+		},
+		{
+			// A single answer is never filtered: dropping it would only
+			// trigger the empty-answer escape hatch, so the fast path
+			// returns it untouched.
+			name:    "single disconnected answer passes through",
+			records: []nbdns.SimpleRecord{disconnectedRec},
+			connByIP: map[string]ipState{
+				"100.64.0.11": {known: true, connected: false},
+			},
+			wantInOrder: []string{"100.64.0.11"},
+		},
+	}
+
+	for _, tc := range tests {
+		t.Run(tc.name, func(t *testing.T) {
+			resolver := NewResolver()
+			if tc.connByIP != nil {
+				cm := mockPeerConnectivity{byIP: make(map[string]struct{ known, connected bool }, len(tc.connByIP))}
+				for ip, st := range tc.connByIP {
+					cm.byIP[ip] = struct{ known, connected bool }{st.known, st.connected}
+				}
+				resolver.SetPeerConnectivity(cm)
+			}
+			resolver.Update([]nbdns.CustomZone{{
+				Domain:           strings.TrimSuffix(zone, "."),
+				Records:          tc.records,
+				NonAuthoritative: true,
+			}})
+
+			var got *dns.Msg
+			writer := &test.MockResponseWriter{
+				WriteMsgFunc: func(m *dns.Msg) error {
+					got = m
+					return nil
+				},
+			}
+			req := new(dns.Msg).SetQuestion(zone, dns.TypeA)
+			resolver.ServeDNS(writer, req)
+
+			require.NotNil(t, got, "resolver must produce a response")
+			require.Len(t, got.Answer, len(tc.wantInOrder),
+				"answer count must match expected: %v", tc.wantInOrder)
+			for i, want := range tc.wantInOrder {
+				a, ok := got.Answer[i].(*dns.A)
+				require.True(t, ok, "answer[%d] must be an A record", i)
+				assert.Equal(t, want, a.A.String(),
+					"answer[%d] expected %s got %s", i, want, a.A.String())
+			}
+		})
+	}
+}

client/internal/dns/resutil/resolve.go

@@ -14,6 +14,10 @@ import (
 	log "github.com/sirupsen/logrus"
 )
 
+// errNoSuitableAddress mirrors the unexported error string the net package
+// uses when a resolved host has no addresses of the requested family.
+const errNoSuitableAddress = "no suitable address found"
+
 // GenerateRequestID creates a random 8-character hex string for request tracing.
 func GenerateRequestID() string {
 	bytes := make([]byte, 4)
@@ -126,6 +130,14 @@ func LookupIP(ctx context.Context, r resolver, network, host string, qtype uint1
 }
 
 func getRcodeForError(ctx context.Context, r resolver, host string, qtype uint16, err error) int {
+	// The net package returns this AddrError when the host resolves but has
+	// no addresses of the requested family. The domain exists, so answer
+	// NODATA instead of SERVFAIL.
+	var addrErr *net.AddrError
+	if errors.As(err, &addrErr) && addrErr.Err == errNoSuitableAddress {
+		return dns.RcodeSuccess
+	}
+
 	var dnsErr *net.DNSError
 	if !errors.As(err, &dnsErr) {
 		return dns.RcodeServerFailure

client/internal/dns/resutil/resolve_test.go

@@ -0,0 +1,122 @@
+package resutil
+
+import (
+	"context"
+	"errors"
+	"net"
+	"net/netip"
+	"testing"
+
+	"github.com/miekg/dns"
+	"github.com/stretchr/testify/assert"
+	"github.com/stretchr/testify/require"
+)
+
+type mockResolver struct {
+	// results maps network ("ip4"/"ip6") to the lookup outcome.
+	results map[string]mockLookup
+}
+
+type mockLookup struct {
+	ips []netip.Addr
+	err error
+}
+
+func (m *mockResolver) LookupNetIP(_ context.Context, network, _ string) ([]netip.Addr, error) {
+	res, ok := m.results[network]
+	if !ok {
+		return nil, errors.New("unexpected network: " + network)
+	}
+	return res.ips, res.err
+}
+
+func TestLookupIP_Success(t *testing.T) {
+	r := &mockResolver{results: map[string]mockLookup{
+		"ip4": {ips: []netip.Addr{netip.MustParseAddr("::ffff:192.0.2.1")}},
+	}}
+
+	result := LookupIP(context.Background(), r, "ip4", "example.com.", dns.TypeA)
+
+	assert.Equal(t, dns.RcodeSuccess, result.Rcode, "successful lookup should return NOERROR")
+	require.Len(t, result.IPs, 1, "should return the resolved address")
+	assert.Equal(t, netip.MustParseAddr("192.0.2.1"), result.IPs[0], "v4-mapped address should be unmapped")
+}
+
+func TestLookupIP_NoSuitableAddress(t *testing.T) {
+	// The net package returns this AddrError when the host resolves but has
+	// no addresses of the requested family (e.g. AAAA query for a v4-only
+	// hosts file entry). The domain exists, so this is NODATA, not SERVFAIL.
+	r := &mockResolver{results: map[string]mockLookup{
+		"ip6": {err: &net.AddrError{Err: "no suitable address found", Addr: "example.com."}},
+	}}
+
+	result := LookupIP(context.Background(), r, "ip6", "example.com.", dns.TypeAAAA)
+
+	assert.Equal(t, dns.RcodeSuccess, result.Rcode, "no suitable address should map to NODATA")
+	assert.Empty(t, result.IPs, "NODATA response should carry no addresses")
+}
+
+// TestErrNoSuitableAddressMatchesNetPackage pins our copy of the error string
+// to what the net package actually emits. A literal IP of the wrong family
+// takes the same filterAddrList path as a resolved hostname, without network
+// access.
+func TestErrNoSuitableAddressMatchesNetPackage(t *testing.T) {
+	_, err := (&net.Resolver{}).LookupNetIP(context.Background(), "ip6", "192.0.2.1")
+	require.Error(t, err)
+
+	var addrErr *net.AddrError
+	require.ErrorAs(t, err, &addrErr, "wrong-family lookup should return AddrError")
+	assert.Equal(t, errNoSuitableAddress, addrErr.Err, "net package error string should match our constant")
+}
+
+func TestLookupIP_OtherAddrError(t *testing.T) {
+	r := &mockResolver{results: map[string]mockLookup{
+		"ip4": {err: &net.AddrError{Err: "some other address problem", Addr: "example.com."}},
+	}}
+
+	result := LookupIP(context.Background(), r, "ip4", "example.com.", dns.TypeA)
+
+	assert.Equal(t, dns.RcodeServerFailure, result.Rcode, "unrecognized AddrError should map to SERVFAIL")
+}
+
+func TestLookupIP_NotFoundNXDomain(t *testing.T) {
+	r := &mockResolver{results: map[string]mockLookup{
+		"ip4": {err: &net.DNSError{Err: "no such host", Name: "example.com.", IsNotFound: true}},
+		"ip6": {err: &net.DNSError{Err: "no such host", Name: "example.com.", IsNotFound: true}},
+	}}
+
+	result := LookupIP(context.Background(), r, "ip4", "example.com.", dns.TypeA)
+
+	assert.Equal(t, dns.RcodeNameError, result.Rcode, "not found for both families should map to NXDOMAIN")
+}
+
+func TestLookupIP_NotFoundNoData(t *testing.T) {
+	r := &mockResolver{results: map[string]mockLookup{
+		"ip6": {err: &net.DNSError{Err: "no such host", Name: "example.com.", IsNotFound: true}},
+		"ip4": {ips: []netip.Addr{netip.MustParseAddr("192.0.2.1")}},
+	}}
+
+	result := LookupIP(context.Background(), r, "ip6", "example.com.", dns.TypeAAAA)
+
+	assert.Equal(t, dns.RcodeSuccess, result.Rcode, "not found with the other family present should map to NODATA")
+}
+
+func TestLookupIP_GenericError(t *testing.T) {
+	r := &mockResolver{results: map[string]mockLookup{
+		"ip4": {err: errors.New("connection refused")},
+	}}
+
+	result := LookupIP(context.Background(), r, "ip4", "example.com.", dns.TypeA)
+
+	assert.Equal(t, dns.RcodeServerFailure, result.Rcode, "generic error should map to SERVFAIL")
+}
+
+func TestLookupIP_DNSErrorNotIsNotFound(t *testing.T) {
+	r := &mockResolver{results: map[string]mockLookup{
+		"ip4": {err: &net.DNSError{Err: "server misbehaving", Name: "example.com.", IsTemporary: true}},
+	}}
+
+	result := LookupIP(context.Background(), r, "ip4", "example.com.", dns.TypeA)
+
+	assert.Equal(t, dns.RcodeServerFailure, result.Rcode, "upstream failure should map to SERVFAIL")
+}

client/internal/dns/server.go

@@ -301,6 +301,11 @@ func newDefaultServer(
 		warningDelayBase:  defaultWarningDelayBase,
 		healthRefresh:     make(chan struct{}, 1),
 	}
+	// Wire the local resolver against the peer status recorder so it can
+	// suppress A/AAAA answers that point at disconnected peers (typical
+	// case: synthesised private-service records pointing at an embedded
+	// proxy peer that just went offline).
+	defaultServer.localResolver.SetPeerConnectivity(localPeerConnectivity{statusRecorder})
 
 	// register with root zone, handler chain takes care of the routing
 	dnsService.RegisterMux(".", handlerChain)
@@ -772,13 +777,24 @@ func (s *DefaultServer) applyHostConfig() {
 // context is released rather than leaked until GC.
 func (s *DefaultServer) registerFallback() {
 	originalNameservers := s.hostManager.getOriginalNameservers()
-	if len(originalNameservers) == 0 {
+
+	serverIP := s.service.RuntimeIP()
+	var servers []netip.AddrPort
+	for _, ns := range originalNameservers {
+		if ns == serverIP {
+			log.Debugf("skipping original nameserver %s as it is the same as the server IP %s", ns, serverIP)
+			continue
+		}
+		servers = append(servers, netip.AddrPortFrom(ns, DefaultPort))
+	}
+
+	if len(servers) == 0 {
 		log.Debugf("no fallback upstreams to register; clearing PriorityFallback handler")
 		s.clearFallback()
 		return
 	}
 
-	log.Infof("registering original nameservers %v as upstream handlers with priority %d", originalNameservers, PriorityFallback)
+	log.Infof("registering original nameservers %v as upstream handlers with priority %d", servers, PriorityFallback)
 
 	handler, err := newUpstreamResolver(
 		s.ctx,
@@ -792,11 +808,6 @@ func (s *DefaultServer) registerFallback() {
 		return
 	}
 	handler.selectedRoutes = s.selectedRoutes
-
-	var servers []netip.AddrPort
-	for _, ns := range originalNameservers {
-		servers = append(servers, netip.AddrPortFrom(ns, DefaultPort))
-	}
 	handler.addRace(servers)
 
 	prev := s.fallbackHandler
@@ -1386,3 +1397,25 @@ func (s *DefaultServer) PopulateManagementDomain(mgmtURL *url.URL) error {
 	}
 	return nil
 }
+
+// localPeerConnectivity adapts *peer.Status to local.PeerConnectivity so
+// the local resolver can ask "is this IP a known peer and is it
+// connected?" without taking on the peer package as a dependency.
+// A nil status recorder always reports known=false so the resolver
+// short-circuits to the legacy "return everything" path.
+type localPeerConnectivity struct {
+	status *peer.Status
+}
+
+// IsConnectedByIP looks the IP up in the peerstore and surfaces both
+// the known and connected bits. Used by Resolver.filterDisconnectedPeerAnswers.
+func (l localPeerConnectivity) IsConnectedByIP(ip string) (known, connected bool) {
+	if l.status == nil {
+		return false, false
+	}
+	state, ok := l.status.PeerStateByIP(ip)
+	if !ok {
+		return false, false
+	}
+	return true, state.ConnStatus == peer.StatusConnected
+}

client/internal/engine.go

@@ -22,7 +22,6 @@ import (
 	log "github.com/sirupsen/logrus"
 	"golang.zx2c4.com/wireguard/tun/netstack"
 	"golang.zx2c4.com/wireguard/wgctrl/wgtypes"
-	"google.golang.org/protobuf/proto"
 
 	nberrors "github.com/netbirdio/netbird/client/errors"
 	"github.com/netbirdio/netbird/client/firewall"
@@ -54,8 +53,8 @@ import (
 	"github.com/netbirdio/netbird/client/internal/relay"
 	"github.com/netbirdio/netbird/client/internal/rosenpass"
 	"github.com/netbirdio/netbird/client/internal/routemanager"
-	"github.com/netbirdio/netbird/client/internal/routemanager/systemops"
 	"github.com/netbirdio/netbird/client/internal/statemanager"
+	"github.com/netbirdio/netbird/client/internal/syncstore"
 	"github.com/netbirdio/netbird/client/internal/updater"
 	"github.com/netbirdio/netbird/client/jobexec"
 	cProto "github.com/netbirdio/netbird/client/proto"
@@ -65,13 +64,13 @@ import (
 	mgm "github.com/netbirdio/netbird/shared/management/client"
 	"github.com/netbirdio/netbird/shared/management/domain"
 	mgmProto "github.com/netbirdio/netbird/shared/management/proto"
-	"github.com/netbirdio/netbird/shared/netiputil"
 	auth "github.com/netbirdio/netbird/shared/relay/auth/hmac"
 	relayClient "github.com/netbirdio/netbird/shared/relay/client"
 	signal "github.com/netbirdio/netbird/shared/signal/client"
 	sProto "github.com/netbirdio/netbird/shared/signal/proto"
 	"github.com/netbirdio/netbird/util"
 	"github.com/netbirdio/netbird/util/capture"
+	"github.com/netbirdio/netbird/version"
 )
 
 // PeerConnectionTimeoutMax is a timeout of an initial connection attempt to a remote peer.
@@ -148,6 +147,10 @@ type EngineConfig struct {
 
 	LogPath string
 	TempDir string
+
+	// StateDir is the directory holding the state file. The sync response
+	// (network map) is serialized here on platforms that persist it to disk.
+	StateDir string
 }
 
 // EngineServices holds the external service dependencies required by the Engine.
@@ -226,11 +229,16 @@ type Engine struct {
 
 	afpacketCapture *capture.AFPacketCapture
 
-	// Sync response persistence (protected by syncRespMux)
-	syncRespMux         sync.RWMutex
-	persistSyncResponse bool
-	latestSyncResponse  *mgmProto.SyncResponse
-	flowManager         nftypes.FlowManager
+	// Sync response persistence (protected by syncRespMux).
+	// syncStore is nil unless persistence has been enabled; its presence is
+	// what marks persistence as active. The backend (disk or memory) is
+	// selected per-platform; see the syncstore package. syncStoreDir is where
+	// a disk-backed store serializes to.
+	syncRespMux  sync.RWMutex
+	syncStore    syncstore.Store
+	syncStoreDir string
+
+	flowManager nftypes.FlowManager
 
 	// auto-update
 	updateManager *updater.Manager
@@ -292,6 +300,7 @@ func NewEngine(
 		jobExecutor:        jobexec.NewExecutor(),
 		clientMetrics:      services.ClientMetrics,
 		updateManager:      services.UpdateManager,
+		syncStoreDir:       config.StateDir,
 	}
 
 	log.Infof("I am: %s", config.WgPrivateKey.PublicKey().String())
@@ -520,6 +529,10 @@ func (e *Engine) Start(netbirdConfig *mgmProto.NetbirdConfig, mgmtURL *url.URL)
 		return fmt.Errorf("create wg interface: %w", err)
 	}
 
+	if filteredDevice := e.wgInterface.GetDevice(); filteredDevice != nil {
+		filteredDevice.SetPanicHandler(e.triggerClientRestart)
+	}
+
 	if err := e.createFirewall(); err != nil {
 		e.close()
 		return err
@@ -869,63 +882,25 @@ func (e *Engine) handleSync(update *mgmProto.SyncResponse) error {
 		e.handleAutoUpdateVersion(update.NetworkMap.PeerConfig.AutoUpdate)
 	}
 
-	if update.GetNetbirdConfig() != nil {
-		wCfg := update.GetNetbirdConfig()
-		err := e.updateTURNs(wCfg.GetTurns())
-		if err != nil {
-			return fmt.Errorf("update TURNs: %w", err)
-		}
+	if err := e.updateNetbirdConfig(update.GetNetbirdConfig()); err != nil {
+		return err
+	}
 
-		err = e.updateSTUNs(wCfg.GetStuns())
-		if err != nil {
-			return fmt.Errorf("update STUNs: %w", err)
-		}
-
-		var stunTurn []*stun.URI
-		stunTurn = append(stunTurn, e.STUNs...)
-		stunTurn = append(stunTurn, e.TURNs...)
-		e.stunTurn.Store(stunTurn)
-
-		err = e.handleRelayUpdate(wCfg.GetRelay())
-		if err != nil {
-			return err
-		}
-
-		err = e.handleFlowUpdate(wCfg.GetFlow())
-		if err != nil {
-			return fmt.Errorf("handle the flow configuration: %w", err)
-		}
-
-		if err := e.PopulateNetbirdConfig(wCfg, nil); err != nil {
-			log.Warnf("Failed to update DNS server config: %v", err)
-		}
-
-		// todo update signal
+	// Posture checks are bound to the network map presence:
+	//   NetworkMap != nil, checks present -> apply the received checks
+	//   NetworkMap != nil, checks nil     -> posture checks were removed, clear them
+	//   NetworkMap == nil                 -> config-only update (e.g. relay token rotation),
+	//                                        leave the previously applied checks untouched
+	nm := update.GetNetworkMap()
+	if nm == nil {
+		return nil
 	}
 
 	if err := e.updateChecksIfNew(update.Checks); err != nil {
 		return err
 	}
 
-	nm := update.GetNetworkMap()
-	if nm == nil {
-		return nil
-	}
-
-	// Persist sync response under the dedicated lock (syncRespMux), not under syncMsgMux.
-	// Read the storage-enabled flag under the syncRespMux too.
-	e.syncRespMux.RLock()
-	enabled := e.persistSyncResponse
-	e.syncRespMux.RUnlock()
-
-	// Store sync response if persistence is enabled
-	if enabled {
-		e.syncRespMux.Lock()
-		e.latestSyncResponse = update
-		e.syncRespMux.Unlock()
-
-		log.Debugf("sync response persisted with serial %d", nm.GetSerial())
-	}
+	e.persistSyncResponse(update)
 
 	// only apply new changes and ignore old ones
 	if err := e.updateNetworkMap(nm); err != nil {
@@ -937,6 +912,64 @@ func (e *Engine) handleSync(update *mgmProto.SyncResponse) error {
 	return nil
 }
 
+// updateNetbirdConfig applies the management-provided NetBird configuration:
+// STUN/TURN and relay servers, flow logging and DNS settings. A nil config is a no-op,
+// which is the case for sync updates carrying only a network map.
+func (e *Engine) updateNetbirdConfig(wCfg *mgmProto.NetbirdConfig) error {
+	if wCfg == nil {
+		return nil
+	}
+
+	if err := e.updateTURNs(wCfg.GetTurns()); err != nil {
+		return fmt.Errorf("update TURNs: %w", err)
+	}
+
+	if err := e.updateSTUNs(wCfg.GetStuns()); err != nil {
+		return fmt.Errorf("update STUNs: %w", err)
+	}
+
+	var stunTurn []*stun.URI
+	stunTurn = append(stunTurn, e.STUNs...)
+	stunTurn = append(stunTurn, e.TURNs...)
+	e.stunTurn.Store(stunTurn)
+
+	if err := e.handleRelayUpdate(wCfg.GetRelay()); err != nil {
+		return err
+	}
+
+	if err := e.handleFlowUpdate(wCfg.GetFlow()); err != nil {
+		return fmt.Errorf("handle the flow configuration: %w", err)
+	}
+
+	if err := e.PopulateNetbirdConfig(wCfg, nil); err != nil {
+		log.Warnf("Failed to update DNS server config: %v", err)
+	}
+
+	// todo update signal
+
+	return nil
+}
+
+// persistSyncResponse stores the full sync response so it can be restored on the next
+// startup. Persistence is enabled only when syncStore is set. The dedicated syncRespMux
+// (not syncMsgMux) is held for the whole Set so the store cannot be cleared (disabled /
+// engine close) mid-call and have this write resurrect a file that was just removed.
+func (e *Engine) persistSyncResponse(update *mgmProto.SyncResponse) {
+	e.syncRespMux.RLock()
+	defer e.syncRespMux.RUnlock()
+
+	if e.syncStore == nil {
+		return
+	}
+
+	if err := e.syncStore.Set(update); err != nil {
+		log.Errorf("failed to persist sync response: %v", err)
+		return
+	}
+
+	log.Debugf("sync response persisted with serial %d", update.GetNetworkMap().GetSerial())
+}
+
 func (e *Engine) handleRelayUpdate(update *mgmProto.RelayConfig) error {
 	if update != nil {
 		// when we receive token we expect valid address list too
@@ -1044,11 +1077,17 @@ func (e *Engine) updateConfig(conf *mgmProto.PeerConfig) error {
 		return ErrResetConnection
 	}
 
-	if !e.config.DisableIPv6 && e.hasIPv6Changed(conf) {
-		log.Infof("peer IPv6 address changed, restarting client")
-		_ = CtxGetState(e.ctx).Wrap(ErrResetConnection)
-		e.clientCancel()
-		return ErrResetConnection
+	if !e.config.DisableIPv6 {
+		reset, err := e.reconcileIPv6(conf)
+		if err != nil {
+			log.Warnf("reconcile IPv6 from PeerConfig: %v", err)
+		}
+		if reset {
+			log.Infof("peer IPv6 address changed value, restarting client")
+			_ = CtxGetState(e.ctx).Wrap(ErrResetConnection)
+			e.clientCancel()
+			return ErrResetConnection
+		}
 	}
 
 	if conf.GetSshConfig() != nil {
@@ -1063,31 +1102,65 @@ func (e *Engine) updateConfig(conf *mgmProto.PeerConfig) error {
 	state.PubKey = e.config.WgPrivateKey.PublicKey().String()
 	state.KernelInterface = !e.wgInterface.IsUserspaceBind()
 	state.FQDN = conf.GetFqdn()
+	state.WgPort = e.config.WgPort
 
 	e.statusRecorder.UpdateLocalPeerState(state)
 
 	return nil
 }
 
-// hasIPv6Changed reports whether the IPv6 overlay address in the peer config
-// differs from the configured address (added, removed, or changed).
-// Compares against e.config.WgAddr (not the interface address, which may have
-// been cleared by ClearIPv6 if OS assignment failed).
-func (e *Engine) hasIPv6Changed(conf *mgmProto.PeerConfig) bool {
-	current := e.config.WgAddr
+// reconcileIPv6 applies the management-supplied IPv6 overlay address to the
+// engine's WireGuard interface in place when possible. Three transitions:
+//
+//   - First v6 assignment (current had no v6, conf carries one): apply via
+//     WGIface.UpdateAddr, no reset. Critical for embedded clients whose
+//     boot config has no v6 — without this we reset on every fresh start
+//     once management has v6 enabled, orphaning any netstack listeners
+//     held outside the engine.
+//   - v6 removed (current had v6, conf carries none): clear in place, no
+//     reset.
+//   - v6 swapped to a different non-empty value: returns reset=true so the
+//     caller falls back to the engine-recreate path — the underlying
+//     interface address can't be safely swapped in place across all
+//     backends (gVisor netstack in particular fixes its address at
+//     CreateNetTUN time).
+//
+// Mutates e.config.WgAddr to match the applied state so subsequent
+// PeerConfig comparisons are stable.
+func (e *Engine) reconcileIPv6(conf *mgmProto.PeerConfig) (reset bool, err error) {
 	raw := conf.GetAddressV6()
+	current := e.config.WgAddr
 
 	if len(raw) == 0 {
-		return current.HasIPv6()
+		if !current.HasIPv6() {
+			return false, nil
+		}
+		current.ClearIPv6()
+		e.config.WgAddr = current
+		if err := e.wgInterface.UpdateAddr(current); err != nil {
+			return false, fmt.Errorf("clear ipv6 on wg interface: %w", err)
+		}
+		return false, nil
 	}
 
-	prefix, err := netiputil.DecodePrefix(raw)
-	if err != nil {
-		log.Errorf("decode v6 overlay address: %v", err)
-		return false
+	incoming := current
+	if err := incoming.SetIPv6FromCompact(raw); err != nil {
+		return false, fmt.Errorf("decode v6 overlay address: %w", err)
 	}
 
-	return !current.HasIPv6() || current.IPv6 != prefix.Addr() || current.IPv6Net != prefix.Masked()
+	if !current.HasIPv6() {
+		e.config.WgAddr = incoming
+		if err := e.wgInterface.UpdateAddr(incoming); err != nil {
+			return false, fmt.Errorf("apply ipv6 on wg interface: %w", err)
+		}
+		return false, nil
+	}
+
+	if current.IPv6 == incoming.IPv6 && current.IPv6Net == incoming.IPv6Net {
+		return false, nil
+	}
+
+	return true, nil
 }
 
 func (e *Engine) receiveJobEvents() {
@@ -1141,6 +1214,7 @@ func (e *Engine) handleBundle(params *mgmProto.BundleParameters) (*mgmProto.JobR
 		LogPath:        e.config.LogPath,
 		TempDir:        e.config.TempDir,
 		ClientMetrics:  e.clientMetrics,
+		DaemonVersion:  version.NetbirdVersion(),
 		RefreshStatus: func() {
 			e.RunHealthProbes(true)
 		},
@@ -1678,6 +1752,13 @@ func (e *Engine) receiveSignalEvents() {
 				return e.ctx.Err()
 			}
 
+			// Self-addressed heartbeat: the signal client's receive watchdog
+			// round-trips this through the server to confirm the receive stream
+			// is delivering. Liveness is already recorded before this handler.
+			if msg.GetBody().GetType() == sProto.Body_HEARTBEAT {
+				return nil
+			}
+
 			conn, ok := e.peerStore.PeerConn(msg.Key)
 			if !ok {
 				return fmt.Errorf("wrongly addressed message %s", msg.Key)
@@ -1813,6 +1894,18 @@ func (e *Engine) close() {
 	if err := e.portForwardManager.GracefullyStop(ctx); err != nil {
 		log.Warnf("failed to gracefully stop port forwarding manager: %s", err)
 	}
+
+	// Drop any persisted sync response so its network map does not linger on
+	// disk after the engine stops (and cannot leak into a later run).
+	e.syncRespMux.Lock()
+	store := e.syncStore
+	e.syncStore = nil
+	e.syncRespMux.Unlock()
+	if store != nil {
+		if err := store.Clear(); err != nil {
+			log.Warnf("failed to clear persisted sync response on close: %v", err)
+		}
+	}
 }
 
 func (e *Engine) readInitialSettings() ([]*route.Route, *nbdns.Config, bool, error) {
@@ -1864,7 +1957,6 @@ func (e *Engine) newWgIface() (*iface.WGIface, error) {
 		WGPrivKey:    e.config.WgPrivateKey.String(),
 		MTU:          e.config.MTU,
 		TransportNet: transportNet,
-		FilterFn:     e.addrViaRoutes,
 		DisableDNS:   e.config.DisableDNS,
 	}
 
@@ -1967,6 +2059,29 @@ func (e *Engine) GetClientMetrics() *metrics.ClientMetrics {
 	return e.clientMetrics
 }
 
+// Performance bundles runtime-adjustable tunnel pool knobs.
+// See Engine.SetPerformance. Nil fields are ignored.
+type Performance struct {
+	PreallocatedBuffersPerPool *uint32
+}
+
+// SetPerformance applies the given tuning to this engine's live Device.
+func (e *Engine) SetPerformance(t Performance) error {
+	e.syncMsgMux.Lock()
+	defer e.syncMsgMux.Unlock()
+	if e.wgInterface == nil {
+		return fmt.Errorf("wg interface not initialized")
+	}
+	dev := e.wgInterface.GetWGDevice()
+	if dev == nil {
+		return fmt.Errorf("wg device not initialized")
+	}
+	if t.PreallocatedBuffersPerPool != nil {
+		dev.SetPreallocatedBuffersPerPool(*t.PreallocatedBuffersPerPool)
+	}
+	return nil
+}
+
 func findIPFromInterfaceName(ifaceName string) (net.IP, error) {
 	iface, err := net.InterfaceByName(ifaceName)
 	if err != nil {
@@ -2089,21 +2204,6 @@ func (e *Engine) startNetworkMonitor() {
 	}()
 }
 
-func (e *Engine) addrViaRoutes(addr netip.Addr) (bool, netip.Prefix, error) {
-	var vpnRoutes []netip.Prefix
-	for _, routes := range e.routeManager.GetClientRoutes() {
-		if len(routes) > 0 && routes[0] != nil {
-			vpnRoutes = append(vpnRoutes, routes[0].Network)
-		}
-	}
-
-	if isVpn, prefix := systemops.IsAddrRouted(addr, vpnRoutes); isVpn {
-		return true, prefix, nil
-	}
-
-	return false, netip.Prefix{}, nil
-}
-
 func (e *Engine) stopDNSServer() {
 	if e.dnsServer == nil {
 		return
@@ -2119,45 +2219,42 @@ func (e *Engine) stopDNSServer() {
 	e.statusRecorder.UpdateDNSStates(nsGroupStates)
 }
 
-// SetSyncResponsePersistence enables or disables sync response persistence
+// SetSyncResponsePersistence enables or disables sync response persistence.
+// The store is only instantiated while persistence is enabled; construction
+// itself drops any stale data left over from an earlier run (see syncstore).
 func (e *Engine) SetSyncResponsePersistence(enabled bool) {
 	e.syncRespMux.Lock()
 	defer e.syncRespMux.Unlock()
 
-	if enabled == e.persistSyncResponse {
+	if enabled == (e.syncStore != nil) {
 		return
 	}
-	e.persistSyncResponse = enabled
 	log.Debugf("Sync response persistence is set to %t", enabled)
 
 	if !enabled {
-		e.latestSyncResponse = nil
+		if err := e.syncStore.Clear(); err != nil {
+			log.Warnf("failed to clear persisted sync response: %v", err)
+		}
+		e.syncStore = nil
+		return
 	}
+
+	e.syncStore = syncstore.New(e.syncStoreDir)
 }
 
 // GetLatestSyncResponse returns the stored sync response if persistence is enabled
 func (e *Engine) GetLatestSyncResponse() (*mgmProto.SyncResponse, error) {
+	// Hold the lock for the whole Get so the store cannot be cleared
+	// (disabled / engine close) mid-call.
 	e.syncRespMux.RLock()
-	enabled := e.persistSyncResponse
-	latest := e.latestSyncResponse
-	e.syncRespMux.RUnlock()
+	defer e.syncRespMux.RUnlock()
 
-	if !enabled {
+	if e.syncStore == nil {
 		return nil, errors.New("sync response persistence is disabled")
 	}
 
-	if latest == nil {
-		//nolint:nilnil
-		return nil, nil
-	}
-
-	log.Debugf("Retrieving latest sync response with size %d bytes", proto.Size(latest))
-	sr, ok := proto.Clone(latest).(*mgmProto.SyncResponse)
-	if !ok {
-		return nil, fmt.Errorf("failed to clone sync response")
-	}
-
-	return sr, nil
+	//nolint:nilnil
+	return e.syncStore.Get()
 }
 
 // GetWgAddr returns the wireguard address
@@ -2193,7 +2290,7 @@ func (e *Engine) updateDNSForwarder(
 	enabled bool,
 	fwdEntries []*dnsfwd.ForwarderEntry,
 ) {
-	if e.config.DisableServerRoutes {
+	if e.config.DisableServerRoutes || e.config.BlockInbound {
 		return
 	}
 

client/internal/engine_reconcileipv6_test.go

@@ -0,0 +1,305 @@
+package internal
+
+import (
+	"context"
+	"errors"
+	"net/netip"
+	"sync"
+	"testing"
+
+	"github.com/stretchr/testify/assert"
+	"github.com/stretchr/testify/require"
+
+	"github.com/netbirdio/netbird/client/iface/wgaddr"
+	"github.com/netbirdio/netbird/client/internal/peer"
+	mgmtProto "github.com/netbirdio/netbird/shared/management/proto"
+	"github.com/netbirdio/netbird/shared/netiputil"
+)
+
+// reconcileIPv6 / updateConfig regression suite. Locks down the behavior that
+// PR #5631 (main-side IPv6 overlay support) accidentally broke for embedded
+// netstack clients: any first NetworkMap update that brings an IPv6 address
+// used to trigger ErrResetConnection, which destroys the netstack and orphans
+// every listener bound on it (proxy-side inbound listeners in particular).
+// The fix in reconcileIPv6 distinguishes "v6 first-assigned" (apply in place)
+// from "v6 swapped value" (must reset).
+
+func mustEncodeV6Prefix(t *testing.T, p netip.Prefix) []byte {
+	t.Helper()
+	b, err := netiputil.EncodePrefix(p)
+	require.NoError(t, err, "encode v6 prefix %s", p)
+	return b
+}
+
+// reconcileIPv6Fixture builds the smallest Engine the function under test
+// needs: a config (with WgAddr being the load-bearing field) and a wgInterface
+// whose UpdateAddr call we can observe.
+func reconcileIPv6Fixture(t *testing.T, initial wgaddr.Address) (*Engine, *MockWGIface, *wgaddr.Address) {
+	t.Helper()
+	var applied wgaddr.Address
+	mock := &MockWGIface{
+		AddressFunc: func() wgaddr.Address { return initial },
+		UpdateAddrFunc: func(a wgaddr.Address) error {
+			applied = a
+			return nil
+		},
+	}
+	ctx, cancel := context.WithCancel(context.Background())
+	t.Cleanup(cancel)
+	e := &Engine{
+		ctx:         ctx,
+		clientCtx:   ctx,
+		clientCancel: cancel,
+		config:      &EngineConfig{WgAddr: initial},
+		wgInterface: mock,
+		syncMsgMux:  &sync.Mutex{},
+	}
+	return e, mock, &applied
+}
+
+func TestReconcileIPv6_FirstAssignment_AppliesInPlace(t *testing.T) {
+	// Embedded clients boot v4-only; management later assigns a v6 overlay.
+	// The fix: apply v6 in place, return reset=false. Pre-fix this case
+	// fell through to the "v6 changed" branch and reset the engine.
+	v4 := wgaddr.MustParseWGAddress("100.64.0.1/16")
+	e, mock, applied := reconcileIPv6Fixture(t, v4)
+
+	v6Prefix := netip.MustParsePrefix("fd00::1/64")
+	conf := &mgmtProto.PeerConfig{
+		Address:    v4.String(),
+		AddressV6:  mustEncodeV6Prefix(t, v6Prefix),
+	}
+
+	reset, err := e.reconcileIPv6(conf)
+	require.NoError(t, err)
+	assert.False(t, reset, "first v6 assignment must NOT request an engine reset")
+
+	require.True(t, e.config.WgAddr.HasIPv6(), "engine config must record the new v6")
+	assert.Equal(t, v6Prefix.Addr(), e.config.WgAddr.IPv6, "engine config v6 address must match")
+	assert.Equal(t, v6Prefix.Masked(), e.config.WgAddr.IPv6Net, "engine config v6 prefix must match")
+
+	require.True(t, applied.HasIPv6(), "WGIface.UpdateAddr must be called with v6 populated")
+	assert.Equal(t, v6Prefix.Addr(), applied.IPv6, "UpdateAddr must carry the new v6")
+	_ = mock
+}
+
+func TestReconcileIPv6_NoChange_NoOp(t *testing.T) {
+	// Steady state: management redelivers the same PeerConfig. No interface
+	// mutation, no reset. Guards against an infinite reset loop if the
+	// comparison ever drifts (e.g. address-vs-prefix masking bugs).
+	v6Prefix := netip.MustParsePrefix("fd00::1/64")
+	addr := wgaddr.MustParseWGAddress("100.64.0.1/16")
+	require.NoError(t, addr.SetIPv6FromCompact(mustEncodeV6Prefix(t, v6Prefix)))
+
+	updateAddrCalled := false
+	mock := &MockWGIface{
+		AddressFunc: func() wgaddr.Address { return addr },
+		UpdateAddrFunc: func(a wgaddr.Address) error {
+			updateAddrCalled = true
+			return nil
+		},
+	}
+	ctx, cancel := context.WithCancel(context.Background())
+	defer cancel()
+	e := &Engine{
+		ctx:         ctx,
+		clientCtx:   ctx,
+		clientCancel: cancel,
+		config:      &EngineConfig{WgAddr: addr},
+		wgInterface: mock,
+		syncMsgMux:  &sync.Mutex{},
+	}
+
+	conf := &mgmtProto.PeerConfig{
+		Address:   addr.String(),
+		AddressV6: mustEncodeV6Prefix(t, v6Prefix),
+	}
+	reset, err := e.reconcileIPv6(conf)
+	require.NoError(t, err)
+	assert.False(t, reset, "unchanged v6 must NOT trigger reset")
+	assert.False(t, updateAddrCalled, "unchanged v6 must NOT call UpdateAddr")
+}
+
+func TestReconcileIPv6_Removed_AppliesInPlace(t *testing.T) {
+	// Management withdraws v6 (e.g. account toggled off the v6 group).
+	// Cleared in place, no reset.
+	v6Prefix := netip.MustParsePrefix("fd00::1/64")
+	addr := wgaddr.MustParseWGAddress("100.64.0.1/16")
+	require.NoError(t, addr.SetIPv6FromCompact(mustEncodeV6Prefix(t, v6Prefix)))
+
+	e, _, applied := reconcileIPv6Fixture(t, addr)
+	e.config.WgAddr = addr
+
+	conf := &mgmtProto.PeerConfig{
+		Address:   addr.String(),
+		AddressV6: nil,
+	}
+	reset, err := e.reconcileIPv6(conf)
+	require.NoError(t, err)
+	assert.False(t, reset, "v6 removed must NOT trigger reset")
+
+	assert.False(t, e.config.WgAddr.HasIPv6(), "engine config must reflect v6 cleared")
+	assert.False(t, applied.HasIPv6(), "UpdateAddr must receive cleared v6")
+}
+
+func TestReconcileIPv6_PrefixLengthChanged_RequestsReset(t *testing.T) {
+	// Same v6 host, different mask (e.g. /64 → /80). Treated like a value
+	// change because the new netmask redefines the broadcast/scope.
+	oldPrefix := netip.MustParsePrefix("fd00::1/64")
+	newPrefix := netip.MustParsePrefix("fd00::1/80")
+
+	addr := wgaddr.MustParseWGAddress("100.64.0.1/16")
+	require.NoError(t, addr.SetIPv6FromCompact(mustEncodeV6Prefix(t, oldPrefix)))
+
+	updateAddrCalled := false
+	mock := &MockWGIface{
+		AddressFunc: func() wgaddr.Address { return addr },
+		UpdateAddrFunc: func(a wgaddr.Address) error {
+			updateAddrCalled = true
+			return nil
+		},
+	}
+	ctx, cancel := context.WithCancel(context.Background())
+	defer cancel()
+	e := &Engine{
+		ctx:          ctx,
+		clientCtx:    ctx,
+		clientCancel: cancel,
+		config:       &EngineConfig{WgAddr: addr},
+		wgInterface:  mock,
+		syncMsgMux:   &sync.Mutex{},
+	}
+
+	conf := &mgmtProto.PeerConfig{
+		Address:   addr.String(),
+		AddressV6: mustEncodeV6Prefix(t, newPrefix),
+	}
+	reset, err := e.reconcileIPv6(conf)
+	require.NoError(t, err)
+	assert.True(t, reset, "v6 prefix length change must request a reset")
+	assert.False(t, updateAddrCalled, "v6 prefix length change must NOT touch the interface")
+}
+
+func TestReconcileIPv6_ValueChanged_RequestsReset(t *testing.T) {
+	// v6 was X, now Y. The netstack backend can't safely swap an existing
+	// address in place — fall back to the engine recreate path.
+	oldPrefix := netip.MustParsePrefix("fd00::1/64")
+	newPrefix := netip.MustParsePrefix("fd00::2/64")
+
+	addr := wgaddr.MustParseWGAddress("100.64.0.1/16")
+	require.NoError(t, addr.SetIPv6FromCompact(mustEncodeV6Prefix(t, oldPrefix)))
+
+	updateAddrCalled := false
+	mock := &MockWGIface{
+		AddressFunc: func() wgaddr.Address { return addr },
+		UpdateAddrFunc: func(a wgaddr.Address) error {
+			updateAddrCalled = true
+			return nil
+		},
+	}
+	ctx, cancel := context.WithCancel(context.Background())
+	defer cancel()
+	e := &Engine{
+		ctx:          ctx,
+		clientCtx:    ctx,
+		clientCancel: cancel,
+		config:       &EngineConfig{WgAddr: addr},
+		wgInterface:  mock,
+		syncMsgMux:   &sync.Mutex{},
+	}
+
+	conf := &mgmtProto.PeerConfig{
+		Address:   addr.String(),
+		AddressV6: mustEncodeV6Prefix(t, newPrefix),
+	}
+	reset, err := e.reconcileIPv6(conf)
+	require.NoError(t, err)
+	assert.True(t, reset, "v6 value change must request a reset")
+	assert.False(t, updateAddrCalled,
+		"v6 value change must NOT call UpdateAddr — caller will recreate the interface")
+}
+
+func TestReconcileIPv6_InvalidBytes_ReturnsError(t *testing.T) {
+	// Corrupt PeerConfig.AddressV6 must not crash the engine and must not
+	// trigger a spurious reset.
+	v4 := wgaddr.MustParseWGAddress("100.64.0.1/16")
+	e, _, applied := reconcileIPv6Fixture(t, v4)
+
+	conf := &mgmtProto.PeerConfig{
+		Address:   v4.String(),
+		AddressV6: []byte{0x00}, // truncated, definitely not a valid prefix
+	}
+	reset, err := e.reconcileIPv6(conf)
+	require.Error(t, err, "malformed v6 bytes must surface an error")
+	assert.False(t, reset, "decode error must NOT request a reset")
+	assert.False(t, applied.HasIPv6(), "decode error must NOT touch the interface")
+}
+
+func TestReconcileIPv6_UpdateAddrError_DoesNotPropagateReset(t *testing.T) {
+	// If WGIface.UpdateAddr fails (e.g. OS-side assignment error on a
+	// kernel device), reconcileIPv6 returns the error to the caller for
+	// logging — but it must NOT request a reset. The whole point of the
+	// fix is to AVOID the reset cascade on v6 transitions.
+	v4 := wgaddr.MustParseWGAddress("100.64.0.1/16")
+	mock := &MockWGIface{
+		AddressFunc:    func() wgaddr.Address { return v4 },
+		UpdateAddrFunc: func(_ wgaddr.Address) error { return errors.New("os refused address") },
+	}
+	ctx, cancel := context.WithCancel(context.Background())
+	defer cancel()
+	e := &Engine{
+		ctx:          ctx,
+		clientCtx:    ctx,
+		clientCancel: cancel,
+		config:       &EngineConfig{WgAddr: v4},
+		wgInterface:  mock,
+		syncMsgMux:   &sync.Mutex{},
+	}
+
+	v6Prefix := netip.MustParsePrefix("fd00::1/64")
+	conf := &mgmtProto.PeerConfig{
+		Address:   v4.String(),
+		AddressV6: mustEncodeV6Prefix(t, v6Prefix),
+	}
+	reset, err := e.reconcileIPv6(conf)
+	require.Error(t, err, "UpdateAddr failure must surface")
+	assert.False(t, reset, "UpdateAddr failure must NOT request a reset")
+}
+
+func TestUpdateConfig_V6FirstAssignment_DoesNotResetEngine(t *testing.T) {
+	// The integration check: updateConfig must not return ErrResetConnection
+	// when the only change between current state and the new PeerConfig is
+	// "v6 added". Pre-fix this returned ErrResetConnection, tearing down
+	// every listener bound on the engine's netstack.
+	v4 := wgaddr.MustParseWGAddress("100.64.0.1/16")
+	mock := &MockWGIface{
+		AddressFunc:        func() wgaddr.Address { return v4 },
+		UpdateAddrFunc:     func(_ wgaddr.Address) error { return nil },
+		IsUserspaceBindFunc: func() bool { return true },
+	}
+	ctx, cancel := context.WithCancel(context.Background())
+	defer cancel()
+	e := &Engine{
+		ctx:            ctx,
+		clientCtx:      ctx,
+		clientCancel:   cancel,
+		config:         &EngineConfig{WgAddr: v4, WgPort: 51820},
+		wgInterface:    mock,
+		syncMsgMux:     &sync.Mutex{},
+		statusRecorder: peer.NewRecorder("https://mgm.test"),
+	}
+
+	v6Prefix := netip.MustParsePrefix("fd00::1/64")
+	conf := &mgmtProto.PeerConfig{
+		Address:   v4.String(),
+		AddressV6: mustEncodeV6Prefix(t, v6Prefix),
+	}
+
+	err := e.updateConfig(conf)
+	assert.NoError(t, err,
+		"updateConfig MUST NOT return ErrResetConnection when v6 is added for the first time — that's the bug fix")
+	assert.NotErrorIs(t, err, ErrResetConnection)
+
+	require.True(t, e.config.WgAddr.HasIPv6(), "engine config must record the assigned v6 after updateConfig")
+	assert.Equal(t, v6Prefix.Addr(), e.config.WgAddr.IPv6)
+}

client/internal/engine_test.go

@@ -27,7 +27,7 @@ import (
 	"github.com/netbirdio/netbird/client/internal/stdnet"
 	"github.com/netbirdio/netbird/management/server/job"
 
-	"github.com/netbirdio/management-integrations/integrations"
+	"github.com/netbirdio/netbird/management/server/integrations/integrated_validator/validator"
 
 	"github.com/netbirdio/netbird/management/internals/controllers/network_map/controller"
 	"github.com/netbirdio/netbird/management/internals/controllers/network_map/update_channel"
@@ -67,7 +67,6 @@ import (
 	mgmt "github.com/netbirdio/netbird/shared/management/client"
 	mgmtProto "github.com/netbirdio/netbird/shared/management/proto"
 	relayClient "github.com/netbirdio/netbird/shared/relay/client"
-	"github.com/netbirdio/netbird/shared/netiputil"
 	signal "github.com/netbirdio/netbird/shared/signal/client"
 	"github.com/netbirdio/netbird/shared/signal/proto"
 	signalServer "github.com/netbirdio/netbird/signal/server"
@@ -1641,7 +1640,7 @@ func startManagement(t *testing.T, dataDir, testFile string) (*grpc.Server, stri
 		return nil, "", err
 	}
 
-	ia, _ := integrations.NewIntegratedValidator(context.Background(), peersManager, nil, eventStore, cacheStore)
+	ia, _ := validator.NewIntegratedValidator(context.Background(), peersManager, nil, eventStore, cacheStore)
 
 	metrics, err := telemetry.NewDefaultAppMetrics(context.Background())
 	require.NoError(t, err)
@@ -1707,82 +1706,12 @@ func getPeers(e *Engine) int {
 	return len(e.peerStore.PeersPubKey())
 }
 
-func mustEncodePrefix(t *testing.T, p netip.Prefix) []byte {
-	t.Helper()
-	b, err := netiputil.EncodePrefix(p)
-	require.NoError(t, err)
-	return b
-}
-
-func TestEngine_hasIPv6Changed(t *testing.T) {
-	v4Only := wgaddr.MustParseWGAddress("100.64.0.1/16")
-
-	v4v6 := wgaddr.MustParseWGAddress("100.64.0.1/16")
-	v4v6.IPv6 = netip.MustParseAddr("fd00::1")
-	v4v6.IPv6Net = netip.MustParsePrefix("fd00::1/64").Masked()
-
-	tests := []struct {
-		name     string
-		current  wgaddr.Address
-		confV6   []byte
-		expected bool
-	}{
-		{
-			name:     "no v6 before, no v6 now",
-			current:  v4Only,
-			confV6:   nil,
-			expected: false,
-		},
-		{
-			name:     "no v6 before, v6 added",
-			current:  v4Only,
-			confV6:   mustEncodePrefix(t, netip.MustParsePrefix("fd00::1/64")),
-			expected: true,
-		},
-		{
-			name:     "had v6, now removed",
-			current:  v4v6,
-			confV6:   nil,
-			expected: true,
-		},
-		{
-			name:     "had v6, same v6",
-			current:  v4v6,
-			confV6:   mustEncodePrefix(t, netip.MustParsePrefix("fd00::1/64")),
-			expected: false,
-		},
-		{
-			name:     "had v6, different v6",
-			current:  v4v6,
-			confV6:   mustEncodePrefix(t, netip.MustParsePrefix("fd00::2/64")),
-			expected: true,
-		},
-		{
-			name:     "same v6 addr, different prefix length",
-			current:  v4v6,
-			confV6:   mustEncodePrefix(t, netip.MustParsePrefix("fd00::1/80")),
-			expected: true,
-		},
-		{
-			name:     "decode error keeps status quo",
-			current:  v4Only,
-			confV6:   []byte{1, 2, 3},
-			expected: false,
-		},
-	}
-
-	for _, tt := range tests {
-		t.Run(tt.name, func(t *testing.T) {
-			engine := &Engine{
-				config: &EngineConfig{WgAddr: tt.current},
-			}
-			conf := &mgmtProto.PeerConfig{
-				AddressV6: tt.confV6,
-			}
-			assert.Equal(t, tt.expected, engine.hasIPv6Changed(conf))
-		})
-	}
-}
+// The former TestEngine_hasIPv6Changed has been superseded by
+// engine_reconcileipv6_test.go — the underlying function (hasIPv6Changed)
+// was replaced by reconcileIPv6, which applies "v6 added" / "v6 removed"
+// in place instead of demanding a full engine reset. The behavioral
+// matrix the old test enforced is now covered, with corrected expectations,
+// by TestReconcileIPv6_* in that sibling file.
 
 func TestFilterAllowedIPs(t *testing.T) {
 	v4v6Addr := wgaddr.MustParseWGAddress("100.64.0.1/16")

client/internal/lazyconn/support.go

@@ -4,6 +4,8 @@ import (
 	"strings"
 
 	"github.com/hashicorp/go-version"
+
+	nbversion "github.com/netbirdio/netbird/version"
 )
 
 var (
@@ -11,7 +13,7 @@ var (
 )
 
 func IsSupported(agentVersion string) bool {
-	if agentVersion == "development" {
+	if nbversion.IsDevelopmentVersion(agentVersion) {
 		return true
 	}
 

client/internal/networkmonitor/check_change_common.go

@@ -50,7 +50,7 @@ func routeCheck(ctx context.Context, fd int, nexthopv4, nexthopv6 systemops.Next
 		switch msg.Type {
 		// handle route changes
 		case unix.RTM_ADD, syscall.RTM_DELETE:
-			route, err := parseRouteMessage(buf[:n])
+			route, flags, err := parseRouteMessage(buf[:n])
 			if err != nil {
 				log.Debugf("Network monitor: error parsing routing message: %v", err)
 				continue
@@ -66,6 +66,10 @@ func routeCheck(ctx context.Context, fd int, nexthopv4, nexthopv6 systemops.Next
 			}
 			switch msg.Type {
 			case unix.RTM_ADD:
+				if systemops.IgnoreAddedDefaultRoute(flags) {
+					log.Debugf("Network monitor: ignoring added default route via %s, interface %s, flags %#x", route.Gw, intf, flags)
+					continue
+				}
 				log.Infof("Network monitor: default route changed: via %s, interface %s", route.Gw, intf)
 				return nil
 			case unix.RTM_DELETE:
@@ -78,22 +82,26 @@ func routeCheck(ctx context.Context, fd int, nexthopv4, nexthopv6 systemops.Next
 	}
 }
 
-func parseRouteMessage(buf []byte) (*systemops.Route, error) {
+func parseRouteMessage(buf []byte) (*systemops.Route, int, error) {
 	msgs, err := route.ParseRIB(route.RIBTypeRoute, buf)
 	if err != nil {
-		return nil, fmt.Errorf("parse RIB: %v", err)
+		return nil, 0, fmt.Errorf("parse RIB: %v", err)
 	}
 
 	if len(msgs) != 1 {
-		return nil, fmt.Errorf("unexpected RIB message msgs: %v", msgs)
+		return nil, 0, fmt.Errorf("unexpected RIB message msgs: %v", msgs)
 	}
 
 	msg, ok := msgs[0].(*route.RouteMessage)
 	if !ok {
-		return nil, fmt.Errorf("unexpected RIB message type: %T", msgs[0])
+		return nil, 0, fmt.Errorf("unexpected RIB message type: %T", msgs[0])
 	}
 
-	return systemops.MsgToRoute(msg)
+	r, err := systemops.MsgToRoute(msg)
+	if err != nil {
+		return nil, 0, err
+	}
+	return r, msg.Flags, nil
 }
 
 // waitReadable blocks until fd has data to read, or ctx is cancelled.

client/internal/peer/conn.go

@@ -23,6 +23,7 @@ import (
 	"github.com/netbirdio/netbird/client/internal/peer/id"
 	"github.com/netbirdio/netbird/client/internal/peer/worker"
 	"github.com/netbirdio/netbird/client/internal/portforward"
+	"github.com/netbirdio/netbird/client/internal/rosenpass"
 	"github.com/netbirdio/netbird/client/internal/stdnet"
 	"github.com/netbirdio/netbird/route"
 	relayClient "github.com/netbirdio/netbird/shared/relay/client"
@@ -899,7 +900,7 @@ func (conn *Conn) presharedKey(remoteRosenpassKey []byte) *wgtypes.Key {
 	}
 
 	// Fallback to deterministic key if no NetBird PSK is configured
-	determKey, err := conn.rosenpassDetermKey()
+	determKey, err := rosenpass.DeterministicSeedKey(conn.config.LocalKey, conn.config.Key)
 	if err != nil {
 		conn.Log.Errorf("failed to generate Rosenpass initial key: %v", err)
 		return nil
@@ -908,26 +909,6 @@ func (conn *Conn) presharedKey(remoteRosenpassKey []byte) *wgtypes.Key {
 	return determKey
 }
 
-// todo: move this logic into Rosenpass package
-func (conn *Conn) rosenpassDetermKey() (*wgtypes.Key, error) {
-	lk := []byte(conn.config.LocalKey)
-	rk := []byte(conn.config.Key) // remote key
-	var keyInput []byte
-	if string(lk) > string(rk) {
-		//nolint:gocritic
-		keyInput = append(lk[:16], rk[:16]...)
-	} else {
-		//nolint:gocritic
-		keyInput = append(rk[:16], lk[:16]...)
-	}
-
-	key, err := wgtypes.NewKey(keyInput)
-	if err != nil {
-		return nil, err
-	}
-	return &key, nil
-}
-
 func isController(config ConnConfig) bool {
 	return config.LocalKey > config.Key
 }