[client, proxy] IPv6 in-place apply + accept-loop hardening on netstack listeners

Two related fixes for the embedded netbird client and the per-account
inbound listeners that ride on its gVisor netstack.

client/internal/engine.go — replace hasIPv6Changed with reconcileIPv6:

  - First v6 assignment (current had no v6, conf carries one) is applied
    in place via WGIface.UpdateAddr instead of returning ErrResetConnection.
    Pre-fix, every embedded client whose account had IPv6 enabled would
    reset on its first NetworkMap sync — boot config has no v6, the sync
    introduces one, the engine tore itself down to "apply" it. That
    teardown destroys the gVisor netstack and orphans every listener
    bound on it, which is what made the proxy's per-account :80/:443
    silently stop accepting traffic.
  - v6 removed clears in place.
  - v6 swapped to a different non-empty value still resets (gVisor
    netstack can't safely swap its address at runtime).
  - Mutates e.config.WgAddr to match the applied state so subsequent
    PeerConfig comparisons are stable.

proxy/internal/tcp/accept.go (new) + proxy/inbound.go +
proxy/internal/tcp/router.go — harden the two Accept() loops on
netstack-backed listeners:

  - IsClosedListenerErr recognises net.ErrClosed AND gVisor's
    "endpoint is in invalid state" — the latter survives gonet's
    *net.OpError wrapping in a way errors.Is(.., net.ErrClosed) does
    not. Without this the loop spins CPU-hot after the underlying
    netstack is destroyed (peer rekey, embedded-client reset, account
    churn), emitting one log line per iteration.
  - AcceptBackoff implements the exponential backoff that
    net/http.Server.Serve uses on transient Accept errors: 5ms doubling
    up to 1s. Defence-in-depth so an unknown sticky error cannot burn
    a CPU core even if IsClosedListenerErr misses its signature.

proxy/internal/roundtrip/netbird.go — emit a single structured INFO
line summarising every embed.Options flag (account_id, service_id,
public_key, management_url, wg_port, block_inbound, block_lan_access,
disable_ipv6, no_userspace, presence of credentials) when each
per-account embedded client is created. Secrets reduced to a "present"
boolean — never logged verbatim. Diagnostic-only; no behavior change,
but it makes the "why is this embedded peer misbehaving" loop a single
log read instead of a code dive.

Tests (real listeners, scripted errors, no mocks of production code):
  - engine_reconcileipv6_test.go: 8 cases for every transition (first
    assignment, no change, removed, prefix-length changed, value
    changed, invalid bytes, UpdateAddr error) plus a updateConfig
    integration check that the fix actually fires on a v6-added
    PeerConfig.
  - accept_test.go: IsClosedListenerErr matrix + AcceptBackoff
    progression / cap / reset / cancel-during-wait / cancel-before-call.
  - router_test.go, inbound_test.go: scriptedAcceptListener +
    TestRouter_Serve_ExitsOnGVisorInvalidEndpoint and
    TestFeedRouterFromListener_ExitsOnGVisorInvalidEndpoint —
    regression guards that fail in 2 s if the loop ever spins.

.github/dependabot.yml

@@ -0,0 +1,45 @@
+version: 2
+updates:
+  - package-ecosystem: "github-actions"
+    directory: "/"
+    schedule:
+      interval: "daily"
+    open-pull-requests-limit: 15
+    groups:
+      actions:
+        patterns:
+          - "*"
+    ignore:
+      # git-town/action v1.3.x crashes on cyclic PR graphs (self-loop main->main
+      # fork PRs) via its topological-sort visualization. Pinned to v1.2.1 in
+      # git-town.yml; block v1.3.x until upstream tolerates cyclic edges.
+      - dependency-name: "git-town/action"
+        update-types:
+          - "version-update:semver-minor"
+          - "version-update:semver-major"
+
+  - package-ecosystem: "gomod"
+    directories:
+      - "/"
+    schedule:
+      interval: "daily"
+    open-pull-requests-limit: 15
+    groups:
+      aws-sdk:
+        patterns:
+          - "github.com/aws/aws-sdk-go-v2/*"
+      pion:
+        patterns:
+          - "github.com/pion/*"
+      gorm:
+        patterns:
+          - "gorm.io/*"
+      otel:
+        patterns:
+          - "go.opentelemetry.io/*"
+      testcontainers:
+        patterns:
+          - "github.com/testcontainers/testcontainers-go/*"
+      wireguard:
+        patterns:
+          - "golang.zx2c4.com/wireguard*"

.github/workflows/check-license-dependencies.yml

@@ -2,16 +2,16 @@ name: Check License Dependencies
 
 on:
   push:
-    branches: [ main ]
+    branches: [main]
     paths:
-      - 'go.mod'
-      - 'go.sum'
-      - '.github/workflows/check-license-dependencies.yml'
+      - "go.mod"
+      - "go.sum"
+      - ".github/workflows/check-license-dependencies.yml"
   pull_request:
     paths:
-      - 'go.mod'
-      - 'go.sum'
-      - '.github/workflows/check-license-dependencies.yml'
+      - "go.mod"
+      - "go.sum"
+      - ".github/workflows/check-license-dependencies.yml"
 
 jobs:
   check-internal-dependencies:
@@ -19,7 +19,10 @@ jobs:
     runs-on: ubuntu-latest
 
     steps:
-      - uses: actions/checkout@v4
+      - name: Checkout code
+        uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
+        with:
+          persist-credentials: false
 
       - name: Check for problematic license dependencies
         run: |
@@ -56,55 +59,57 @@ jobs:
     runs-on: ubuntu-latest
 
     steps:
-    - uses: actions/checkout@v4
+      - uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
+        with:
+          persist-credentials: false
 
-    - name: Set up Go
-      uses: actions/setup-go@v5
-      with:
-        go-version-file: 'go.mod'
-        cache: true
+      - name: Set up Go
+        uses: actions/setup-go@4b73464bb391d4059bd26b0524d20df3927bd417 # v6.3.0
+        with:
+          go-version-file: "go.mod"
+          cache: true
 
-    - name: Install go-licenses
-      run: go install github.com/google/go-licenses@v1.6.0
+      - name: Install go-licenses
+        run: go install github.com/google/go-licenses@v1.6.0
 
-    - name: Check for GPL/AGPL licensed dependencies
-      run: |
-        echo "Checking for GPL/AGPL/LGPL licensed dependencies..."
-        echo ""
-
-        # Check all Go packages for copyleft licenses, excluding internal netbird packages
-        COPYLEFT_DEPS=$(go-licenses report ./... 2>/dev/null | grep -E 'GPL|AGPL|LGPL' | grep -v 'github.com/netbirdio/netbird/' || true)
-
-        if [ -n "$COPYLEFT_DEPS" ]; then
-          echo "Found copyleft licensed dependencies:"
-          echo "$COPYLEFT_DEPS"
+      - name: Check for GPL/AGPL licensed dependencies
+        run: |
+          echo "Checking for GPL/AGPL/LGPL licensed dependencies..."
           echo ""
 
-          # Filter out dependencies that are only pulled in by internal AGPL packages
-          INCOMPATIBLE=""
-          while IFS=',' read -r package url license; do
-            if echo "$license" | grep -qE 'GPL-[0-9]|AGPL-[0-9]|LGPL-[0-9]'; then
-              # Find ALL packages that import this GPL package using go list
-              IMPORTERS=$(go list -json -deps ./... 2>/dev/null | jq -r "select(.Imports[]? == \"$package\") | .ImportPath")
+          # Check all Go packages for copyleft licenses, excluding internal netbird packages
+          COPYLEFT_DEPS=$(go-licenses report ./... 2>/dev/null | grep -E 'GPL|AGPL|LGPL' | grep -v 'github.com/netbirdio/netbird/' || true)
 
-              # Check if any importer is NOT in management/signal/relay
-              BSD_IMPORTER=$(echo "$IMPORTERS" | grep -v "github.com/netbirdio/netbird/\(management\|signal\|relay\|proxy\|combined\|tools/idp-migrate\)" | head -1)
-
-              if [ -n "$BSD_IMPORTER" ]; then
-                echo "❌ $package ($license) is imported by BSD-licensed code: $BSD_IMPORTER"
-                INCOMPATIBLE="${INCOMPATIBLE}${package},${url},${license}\n"
-              else
-                echo "✓ $package ($license) is only used by internal AGPL packages - OK"
-              fi
-            fi
-          done <<< "$COPYLEFT_DEPS"
-
-          if [ -n "$INCOMPATIBLE" ]; then
+          if [ -n "$COPYLEFT_DEPS" ]; then
+            echo "Found copyleft licensed dependencies:"
+            echo "$COPYLEFT_DEPS"
             echo ""
-            echo "❌ INCOMPATIBLE licenses found that are used by BSD-licensed code:"
-            echo -e "$INCOMPATIBLE"
-            exit 1
-          fi
-        fi
 
-        echo "✅ All external license dependencies are compatible with BSD-3-Clause"
+            # Filter out dependencies that are only pulled in by internal AGPL packages
+            INCOMPATIBLE=""
+            while IFS=',' read -r package url license; do
+              if echo "$license" | grep -qE 'GPL-[0-9]|AGPL-[0-9]|LGPL-[0-9]'; then
+                # Find ALL packages that import this GPL package using go list
+                IMPORTERS=$(go list -json -deps ./... 2>/dev/null | jq -r "select(.Imports[]? == \"$package\") | .ImportPath")
+
+                # Check if any importer is NOT in management/signal/relay
+                BSD_IMPORTER=$(echo "$IMPORTERS" | grep -v "github.com/netbirdio/netbird/\(management\|signal\|relay\|proxy\|combined\|tools/idp-migrate\)" | head -1)
+
+                if [ -n "$BSD_IMPORTER" ]; then
+                  echo "❌ $package ($license) is imported by BSD-licensed code: $BSD_IMPORTER"
+                  INCOMPATIBLE="${INCOMPATIBLE}${package},${url},${license}\n"
+                else
+                  echo "✓ $package ($license) is only used by internal AGPL packages - OK"
+                fi
+              fi
+            done <<< "$COPYLEFT_DEPS"
+
+            if [ -n "$INCOMPATIBLE" ]; then
+              echo ""
+              echo "❌ INCOMPATIBLE licenses found that are used by BSD-licensed code:"
+              echo -e "$INCOMPATIBLE"
+              exit 1
+            fi
+          fi
+
+          echo "✅ All external license dependencies are compatible with BSD-3-Clause"

.github/workflows/docs-ack.yml

@@ -83,7 +83,7 @@ jobs:
 
       - name: Verify docs PR exists (and is open or merged)
         if: steps.validate.outputs.mode == 'added'
-        uses: actions/github-script@v7
+        uses: actions/github-script@3a2844b7e9c422d3c10d287c895573f7108da1b3 # v9.0.0
         id: verify
         with:
           pr_number: ${{ steps.extract.outputs.pr_number }}

.github/workflows/forum.yml

@@ -8,11 +8,10 @@ jobs:
   post:
     runs-on: ubuntu-latest
     steps:
-      - uses: roots/discourse-topic-github-release-action@main
+      - uses: roots/discourse-topic-github-release-action@557d74ea05b6cc0c47f555c1d5d28a89d904005b # v1.1.0
         with:
           discourse-api-key: ${{ secrets.DISCOURSE_RELEASES_API_KEY }}
           discourse-base-url: https://forum.netbird.io
           discourse-author-username: NetBird
           discourse-category: 17
-          discourse-tags:
-            releases
+          discourse-tags: releases

.github/workflows/git-town.yml

@@ -3,7 +3,7 @@ name: Git Town
 on:
   pull_request:
     branches:
-      - '**'
+      - "**"
 
 jobs:
   git-town:
@@ -15,7 +15,9 @@ jobs:
       pull-requests: write
 
     steps:
-      - uses: actions/checkout@v4
-      - uses: git-town/action@v1.2.1
+      - uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
+        with:
+          persist-credentials: false
+      - uses: git-town/action@3d8b878379abb1ee393fb49865a28b4a6c2cd3b0 # v1.2.1
         with:
           skip-single-stacks: true

.github/workflows/golang-test-darwin.yml

@@ -16,16 +16,18 @@ jobs:
     runs-on: macos-latest
     steps:
       - name: Checkout code
-        uses: actions/checkout@v4
+        uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
+        with:
+          persist-credentials: false
 
       - name: Install Go
-        uses: actions/setup-go@v5
+        uses: actions/setup-go@4b73464bb391d4059bd26b0524d20df3927bd417 # v6.3.0
         with:
           go-version-file: "go.mod"
           cache: false
 
       - name: Cache Go modules
-        uses: actions/cache@v4
+        uses: actions/cache@27d5ce7f107fe9357f9df03efb73ab90386fccae # v5.0.5
         with:
           path: ~/go/pkg/mod
           key: macos-gotest-${{ hashFiles('**/go.sum') }}
@@ -43,5 +45,11 @@ jobs:
         run: git --no-pager diff --exit-code
 
       - name: Test
-        run: NETBIRD_STORE_ENGINE=${{ matrix.store }} CI=true go test -tags=devcert -exec 'sudo --preserve-env=CI,NETBIRD_STORE_ENGINE' -timeout 5m -p 1 $(go list ./... | grep -v -e /management -e /signal -e /relay -e /proxy -e /combined)
+        run: NETBIRD_STORE_ENGINE=${{ matrix.store }} CI=true go test -coverprofile=coverage.txt -tags=devcert -exec 'sudo --preserve-env=CI,NETBIRD_STORE_ENGINE' -timeout 5m -p 1 $(go list ./... | grep -v -e /management -e /signal -e /relay -e /proxy -e /combined)
 
+      - name: Upload coverage reports to Codecov
+        uses: codecov/codecov-action@e79a6962e0d4c0c17b229090214935d2e33f8354 #v6.0.1
+        with:
+          token: ${{ secrets.CODECOV_TOKEN }}
+          slug: netbirdio/netbird
+          flags: unit,client

.github/workflows/golang-test-freebsd.yml

@@ -15,20 +15,31 @@ jobs:
     name: "Client / Unit"
     runs-on: ubuntu-22.04
     steps:
-      - uses: actions/checkout@v4
+      - name: Checkout code
+        uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
+        with:
+          persist-credentials: false
+
+      - name: Read Go version from go.mod
+        id: goversion
+        run: echo "version=$(awk '/^go / {print $2}' go.mod)" >> "$GITHUB_OUTPUT"
+
       - name: Test in FreeBSD
         id: test
-        uses: vmactions/freebsd-vm@v1
+        env:
+          GO_VERSION: ${{ steps.goversion.outputs.version }}
+        uses: vmactions/freebsd-vm@d1e65811565151536c0c894fff74f06351ed26e6 # v1.4.5
         with:
           usesh: true
           copyback: false
-          release: "14.2"
+          release: "15.0"
+          envs: "GO_VERSION"
           prepare: |
             pkg install -y curl pkgconf xorg
-            GO_TARBALL="go1.25.3.freebsd-amd64.tar.gz"
+            GO_TARBALL="go${GO_VERSION}.freebsd-amd64.tar.gz"
             GO_URL="https://go.dev/dl/$GO_TARBALL"
             curl -vLO "$GO_URL"
-            tar -C /usr/local -vxzf "$GO_TARBALL"            
+            tar -C /usr/local -vxzf "$GO_TARBALL"
 
           # -x - to print all executed commands
           # -e - to faile on first error

.github/workflows/golang-test-linux.yml

@@ -18,9 +18,11 @@ jobs:
       management: ${{ steps.filter.outputs.management }}
     steps:
       - name: Checkout code
-        uses: actions/checkout@v4
+        uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
+        with:
+          persist-credentials: false
 
-      - uses: dorny/paths-filter@v3
+      - uses: dorny/paths-filter@fbd0ab8f3e69293af611ebaee6363fc25e6d187d # v4.0.1
         id: filter
         with:
           filters: |
@@ -28,7 +30,7 @@ jobs:
               - 'management/**'
 
       - name: Install Go
-        uses: actions/setup-go@v5
+        uses: actions/setup-go@4b73464bb391d4059bd26b0524d20df3927bd417 # v6.3.0
         with:
           go-version-file: "go.mod"
           cache: false
@@ -36,10 +38,10 @@ jobs:
       - name: Get Go environment
         run: |
           echo "cache=$(go env GOCACHE)" >> $GITHUB_ENV
-          echo "modcache=$(go env GOMODCACHE)" >> $GITHUB_ENV     
+          echo "modcache=$(go env GOMODCACHE)" >> $GITHUB_ENV
 
       - name: Cache Go modules
-        uses: actions/cache@v4
+        uses: actions/cache@27d5ce7f107fe9357f9df03efb73ab90386fccae # v5.0.5
         id: cache
         with:
           path: |
@@ -113,14 +115,16 @@ jobs:
     strategy:
       fail-fast: false
       matrix:
-        arch: [ '386','amd64' ]
+        arch: ["386", "amd64"]
     runs-on: ubuntu-22.04
     steps:
       - name: Checkout code
-        uses: actions/checkout@v4
+        uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
+        with:
+          persist-credentials: false
 
       - name: Install Go
-        uses: actions/setup-go@v5
+        uses: actions/setup-go@4b73464bb391d4059bd26b0524d20df3927bd417 # v6.3.0
         with:
           go-version-file: "go.mod"
           cache: false
@@ -128,10 +132,10 @@ jobs:
       - name: Get Go environment
         run: |
           echo "cache=$(go env GOCACHE)" >> $GITHUB_ENV
-          echo "modcache=$(go env GOMODCACHE)" >> $GITHUB_ENV     
+          echo "modcache=$(go env GOMODCACHE)" >> $GITHUB_ENV
 
       - name: Cache Go modules
-        uses: actions/cache/restore@v4
+        uses: actions/cache/restore@27d5ce7f107fe9357f9df03efb73ab90386fccae # v5.0.5
         with:
           path: |
             ${{ env.cache }}
@@ -154,18 +158,29 @@ jobs:
         run: git --no-pager diff --exit-code
 
       - name: Test
-        run: CGO_ENABLED=1 GOARCH=${{ matrix.arch }} CI=true go test -tags devcert -exec 'sudo' -timeout 10m -p 1 $(go list ./... | grep -v -e /management -e /signal -e /relay -e /proxy -e /combined)
+        run: CGO_ENABLED=1 GOARCH=${{ matrix.arch }} CI=true go test -coverprofile=coverage.txt -tags devcert -exec 'sudo' -timeout 10m -p 1 $(go list ./... | grep -v -e /management -e /signal -e /relay -e /proxy -e /combined)
+
+      - name: Upload coverage reports to Codecov
+        if: matrix.arch == 'amd64'
+        uses: codecov/codecov-action@e79a6962e0d4c0c17b229090214935d2e33f8354 #v6.0.1
+        with:
+          token: ${{ secrets.CODECOV_TOKEN }}
+          slug: netbirdio/netbird
+          flags: unit,client
+
 
   test_client_on_docker:
     name: "Client (Docker) / Unit"
-    needs: [ build-cache ]
+    needs: [build-cache]
     runs-on: ubuntu-22.04
     steps:
       - name: Checkout code
-        uses: actions/checkout@v4
+        uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
+        with:
+          persist-credentials: false
 
       - name: Install Go
-        uses: actions/setup-go@v5
+        uses: actions/setup-go@4b73464bb391d4059bd26b0524d20df3927bd417 # v6.3.0
         with:
           go-version-file: "go.mod"
           cache: false
@@ -177,7 +192,7 @@ jobs:
           echo "modcache_dir=$(go env GOMODCACHE)" >> $GITHUB_OUTPUT
 
       - name: Cache Go modules
-        uses: actions/cache/restore@v4
+        uses: actions/cache/restore@27d5ce7f107fe9357f9df03efb73ab90386fccae # v5.0.5
         id: cache-restore
         with:
           path: |
@@ -231,10 +246,12 @@ jobs:
     runs-on: ubuntu-22.04
     steps:
       - name: Checkout code
-        uses: actions/checkout@v4
+        uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
+        with:
+          persist-credentials: false
 
       - name: Install Go
-        uses: actions/setup-go@v5
+        uses: actions/setup-go@4b73464bb391d4059bd26b0524d20df3927bd417 # v6.3.0
         with:
           go-version-file: "go.mod"
           cache: false
@@ -246,10 +263,10 @@ jobs:
       - name: Get Go environment
         run: |
           echo "cache=$(go env GOCACHE)" >> $GITHUB_ENV
-          echo "modcache=$(go env GOMODCACHE)" >> $GITHUB_ENV     
+          echo "modcache=$(go env GOMODCACHE)" >> $GITHUB_ENV
 
       - name: Cache Go modules
-        uses: actions/cache/restore@v4
+        uses: actions/cache/restore@27d5ce7f107fe9357f9df03efb73ab90386fccae # v5.0.5
         with:
           path: |
             ${{ env.cache }}
@@ -268,23 +285,33 @@ jobs:
         run: |
           CGO_ENABLED=1 GOARCH=${{ matrix.arch }} \
           go test ${{ matrix.raceFlag }} \
-            -exec 'sudo' \
+            -exec 'sudo' -coverprofile=coverage.txt \
             -timeout 10m -p 1 ./relay/... ./shared/relay/...
 
+      - name: Upload coverage reports to Codecov
+        if: matrix.arch == 'amd64'
+        uses: codecov/codecov-action@e79a6962e0d4c0c17b229090214935d2e33f8354 #v6.0.1
+        with:
+          token: ${{ secrets.CODECOV_TOKEN }}
+          slug: netbirdio/netbird
+          flags: unit,relay
+
   test_proxy:
     name: "Proxy / Unit"
     needs: [build-cache]
     strategy:
       fail-fast: false
       matrix:
-        arch: [ '386','amd64' ]
+        arch: ["386", "amd64"]
     runs-on: ubuntu-22.04
     steps:
       - name: Checkout code
-        uses: actions/checkout@v4
+        uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
+        with:
+          persist-credentials: false
 
       - name: Install Go
-        uses: actions/setup-go@v5
+        uses: actions/setup-go@4b73464bb391d4059bd26b0524d20df3927bd417 # v6.3.0
         with:
           go-version-file: "go.mod"
           cache: false
@@ -298,7 +325,7 @@ jobs:
           echo "modcache=$(go env GOMODCACHE)" >> $GITHUB_ENV
 
       - name: Cache Go modules
-        uses: actions/cache/restore@v4
+        uses: actions/cache/restore@27d5ce7f107fe9357f9df03efb73ab90386fccae # v5.0.5
         with:
           path: |
             ${{ env.cache }}
@@ -316,7 +343,15 @@ jobs:
       - name: Test
         run: |
           CGO_ENABLED=1 GOARCH=${{ matrix.arch }} \
-          go test -timeout 10m -p 1 ./proxy/...
+          go test -timeout 10m -p 1 -coverprofile=coverage.txt ./proxy/...
+
+      - name: Upload coverage reports to Codecov
+        if: matrix.arch == 'amd64'
+        uses: codecov/codecov-action@e79a6962e0d4c0c17b229090214935d2e33f8354 #v6.0.1
+        with:
+          token: ${{ secrets.CODECOV_TOKEN }}
+          slug: netbirdio/netbird
+          flags: unit,proxy
 
   test_signal:
     name: "Signal / Unit"
@@ -324,14 +359,16 @@ jobs:
     strategy:
       fail-fast: false
       matrix:
-        arch: [ '386','amd64' ]
+        arch: ["386", "amd64"]
     runs-on: ubuntu-22.04
     steps:
       - name: Checkout code
-        uses: actions/checkout@v4
+        uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
+        with:
+          persist-credentials: false
 
       - name: Install Go
-        uses: actions/setup-go@v5
+        uses: actions/setup-go@4b73464bb391d4059bd26b0524d20df3927bd417 # v6.3.0
         with:
           go-version-file: "go.mod"
           cache: false
@@ -343,10 +380,10 @@ jobs:
       - name: Get Go environment
         run: |
           echo "cache=$(go env GOCACHE)" >> $GITHUB_ENV
-          echo "modcache=$(go env GOMODCACHE)" >> $GITHUB_ENV     
+          echo "modcache=$(go env GOMODCACHE)" >> $GITHUB_ENV
 
       - name: Cache Go modules
-        uses: actions/cache/restore@v4
+        uses: actions/cache/restore@27d5ce7f107fe9357f9df03efb73ab90386fccae # v5.0.5
         with:
           path: |
             ${{ env.cache }}
@@ -365,24 +402,34 @@ jobs:
         run: |
           CGO_ENABLED=1 GOARCH=${{ matrix.arch }} \
           go test \
-            -exec 'sudo' \
+            -exec 'sudo' -coverprofile=coverage.txt \
             -timeout 10m ./signal/... ./shared/signal/...
 
+      - name: Upload coverage reports to Codecov
+        if: matrix.arch == 'amd64'
+        uses: codecov/codecov-action@e79a6962e0d4c0c17b229090214935d2e33f8354 #v6.0.1
+        with:
+          token: ${{ secrets.CODECOV_TOKEN }}
+          slug: netbirdio/netbird
+          flags: unit,signal
+
   test_management:
     name: "Management / Unit"
-    needs: [ build-cache ]
+    needs: [build-cache]
     strategy:
       fail-fast: false
       matrix:
-        arch: [ 'amd64' ]
-        store: [ 'sqlite', 'postgres', 'mysql' ]
+        arch: ["amd64"]
+        store: ["sqlite", "postgres", "mysql"]
     runs-on: ubuntu-22.04
     steps:
       - name: Checkout code
-        uses: actions/checkout@v4
+        uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
+        with:
+          persist-credentials: false
 
       - name: Install Go
-        uses: actions/setup-go@v5
+        uses: actions/setup-go@4b73464bb391d4059bd26b0524d20df3927bd417 # v6.3.0
         with:
           go-version-file: "go.mod"
           cache: false
@@ -390,10 +437,10 @@ jobs:
       - name: Get Go environment
         run: |
           echo "cache=$(go env GOCACHE)" >> $GITHUB_ENV
-          echo "modcache=$(go env GOMODCACHE)" >> $GITHUB_ENV     
+          echo "modcache=$(go env GOMODCACHE)" >> $GITHUB_ENV
 
       - name: Cache Go modules
-        uses: actions/cache/restore@v4
+        uses: actions/cache/restore@27d5ce7f107fe9357f9df03efb73ab90386fccae # v5.0.5
         with:
           path: |
             ${{ env.cache }}
@@ -410,7 +457,7 @@ jobs:
 
       - name: Login to Docker hub
         if: github.event.pull_request && github.event.pull_request.head.repo && github.event.pull_request.head.repo.full_name == '' || github.repository == github.event.pull_request.head.repo.full_name || !github.head_ref
-        uses: docker/login-action@v3
+        uses: docker/login-action@650006c6eb7dba73a995cc03b0b2d7f5ca915bee # v4.2.0
         with:
           username: ${{ secrets.DOCKER_USER }}
           password: ${{ secrets.DOCKER_TOKEN }}
@@ -427,23 +474,31 @@ jobs:
         run: docker pull mlsmaycon/warmed-mysql:8
 
       - name: Test
-        run: |          
+        run: |
           CGO_ENABLED=1 GOARCH=${{ matrix.arch }} \
           NETBIRD_STORE_ENGINE=${{ matrix.store }} \
             CI=true \
-          go test -tags=devcert \
+          go test -tags=devcert -coverprofile=coverage.txt \
             -exec "sudo --preserve-env=CI,NETBIRD_STORE_ENGINE" \
             -timeout 20m ./management/... ./shared/management/...
 
+      - name: Upload coverage reports to Codecov
+        if: matrix.arch == 'amd64'
+        uses: codecov/codecov-action@e79a6962e0d4c0c17b229090214935d2e33f8354 #v6.0.1
+        with:
+          token: ${{ secrets.CODECOV_TOKEN }}
+          slug: netbirdio/netbird
+          flags: unit,management
+
   benchmark:
     name: "Management / Benchmark"
-    needs: [ build-cache ]
+    needs: [build-cache]
     if: ${{ needs.build-cache.outputs.management == 'true' || github.event_name != 'pull_request' }}
     strategy:
       fail-fast: false
       matrix:
-        arch: [ 'amd64' ]
-        store: [ 'sqlite', 'postgres' ]
+        arch: ["amd64"]
+        store: ["sqlite", "postgres"]
     runs-on: ubuntu-22.04
     steps:
       - name: Create Docker network
@@ -474,10 +529,12 @@ jobs:
             prom/prometheus
 
       - name: Checkout code
-        uses: actions/checkout@v4
+        uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
+        with:
+          persist-credentials: false
 
       - name: Install Go
-        uses: actions/setup-go@v5
+        uses: actions/setup-go@4b73464bb391d4059bd26b0524d20df3927bd417 # v6.3.0
         with:
           go-version-file: "go.mod"
           cache: false
@@ -485,10 +542,10 @@ jobs:
       - name: Get Go environment
         run: |
           echo "cache=$(go env GOCACHE)" >> $GITHUB_ENV
-          echo "modcache=$(go env GOMODCACHE)" >> $GITHUB_ENV     
+          echo "modcache=$(go env GOMODCACHE)" >> $GITHUB_ENV
 
       - name: Cache Go modules
-        uses: actions/cache/restore@v4
+        uses: actions/cache/restore@27d5ce7f107fe9357f9df03efb73ab90386fccae # v5.0.5
         with:
           path: |
             ${{ env.cache }}
@@ -505,7 +562,7 @@ jobs:
 
       - name: Login to Docker hub
         if: github.event.pull_request && github.event.pull_request.head.repo && github.event.pull_request.head.repo.full_name == '' || github.repository == github.event.pull_request.head.repo.full_name || !github.head_ref
-        uses: docker/login-action@v3
+        uses: docker/login-action@650006c6eb7dba73a995cc03b0b2d7f5ca915bee # v4.2.0
         with:
           username: ${{ secrets.DOCKER_USER }}
           password: ${{ secrets.DOCKER_TOKEN }}
@@ -529,13 +586,13 @@ jobs:
 
   api_benchmark:
     name: "Management / Benchmark (API)"
-    needs: [ build-cache ]
+    needs: [build-cache]
     if: ${{ needs.build-cache.outputs.management == 'true' || github.event_name != 'pull_request' }}
     strategy:
       fail-fast: false
       matrix:
-        arch: [ 'amd64' ]
-        store: [ 'sqlite', 'postgres' ]
+        arch: ["amd64"]
+        store: ["sqlite", "postgres"]
     runs-on: ubuntu-22.04
     steps:
       - name: Create Docker network
@@ -566,10 +623,12 @@ jobs:
             prom/prometheus
 
       - name: Checkout code
-        uses: actions/checkout@v4
+        uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
+        with:
+          persist-credentials: false
 
       - name: Install Go
-        uses: actions/setup-go@v5
+        uses: actions/setup-go@4b73464bb391d4059bd26b0524d20df3927bd417 # v6.3.0
         with:
           go-version-file: "go.mod"
           cache: false
@@ -577,10 +636,10 @@ jobs:
       - name: Get Go environment
         run: |
           echo "cache=$(go env GOCACHE)" >> $GITHUB_ENV
-          echo "modcache=$(go env GOMODCACHE)" >> $GITHUB_ENV     
+          echo "modcache=$(go env GOMODCACHE)" >> $GITHUB_ENV
 
       - name: Cache Go modules
-        uses: actions/cache/restore@v4
+        uses: actions/cache/restore@27d5ce7f107fe9357f9df03efb73ab90386fccae # v5.0.5
         with:
           path: |
             ${{ env.cache }}
@@ -597,7 +656,7 @@ jobs:
 
       - name: Login to Docker hub
         if: github.event.pull_request && github.event.pull_request.head.repo && github.event.pull_request.head.repo.full_name == '' || github.repository == github.event.pull_request.head.repo.full_name || !github.head_ref
-        uses: docker/login-action@v3
+        uses: docker/login-action@650006c6eb7dba73a995cc03b0b2d7f5ca915bee # v4.2.0
         with:
           username: ${{ secrets.DOCKER_USER }}
           password: ${{ secrets.DOCKER_TOKEN }}
@@ -623,20 +682,22 @@ jobs:
 
   api_integration_test:
     name: "Management / Integration"
-    needs: [ build-cache ]
+    needs: [build-cache]
     if: ${{ needs.build-cache.outputs.management == 'true' || github.event_name != 'pull_request' }}
     strategy:
       fail-fast: false
       matrix:
-        arch: [ 'amd64' ]
-        store: [ 'sqlite', 'postgres']
+        arch: ["amd64"]
+        store: ["sqlite", "postgres"]
     runs-on: ubuntu-22.04
     steps:
       - name: Checkout code
-        uses: actions/checkout@v4
+        uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
+        with:
+          persist-credentials: false
 
       - name: Install Go
-        uses: actions/setup-go@v5
+        uses: actions/setup-go@4b73464bb391d4059bd26b0524d20df3927bd417 # v6.3.0
         with:
           go-version-file: "go.mod"
           cache: false
@@ -644,10 +705,10 @@ jobs:
       - name: Get Go environment
         run: |
           echo "cache=$(go env GOCACHE)" >> $GITHUB_ENV
-          echo "modcache=$(go env GOMODCACHE)" >> $GITHUB_ENV     
+          echo "modcache=$(go env GOMODCACHE)" >> $GITHUB_ENV
 
       - name: Cache Go modules
-        uses: actions/cache/restore@v4
+        uses: actions/cache/restore@27d5ce7f107fe9357f9df03efb73ab90386fccae # v5.0.5
         with:
           path: |
             ${{ env.cache }}
@@ -667,6 +728,14 @@ jobs:
           CGO_ENABLED=1 GOARCH=${{ matrix.arch }} \
           NETBIRD_STORE_ENGINE=${{ matrix.store }} \
           CI=true \
-          go test -tags=integration \
+          go test -tags=integration -coverprofile=coverage.txt \
           -exec 'sudo --preserve-env=CI,NETBIRD_STORE_ENGINE' \
           -timeout 20m ./management/server/http/...
+
+      - name: Upload coverage reports to Codecov
+        if: matrix.arch == 'amd64'
+        uses: codecov/codecov-action@e79a6962e0d4c0c17b229090214935d2e33f8354 #v6.0.1
+        with:
+          token: ${{ secrets.CODECOV_TOKEN }}
+          slug: netbirdio/netbird
+          flags: integration,management

.github/workflows/golang-test-windows.yml

@@ -18,10 +18,12 @@ jobs:
     runs-on: windows-latest
     steps:
       - name: Checkout code
-        uses: actions/checkout@v4
+        uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
+        with:
+          persist-credentials: false
 
       - name: Install Go
-        uses: actions/setup-go@v5
+        uses: actions/setup-go@4b73464bb391d4059bd26b0524d20df3927bd417 # v6.3.0
         id: go
         with:
           go-version-file: "go.mod"
@@ -33,7 +35,7 @@ jobs:
           echo "modcache=$(go env GOMODCACHE)" >> $env:GITHUB_ENV
 
       - name: Cache Go modules
-        uses: actions/cache@v4
+        uses: actions/cache@27d5ce7f107fe9357f9df03efb73ab90386fccae # v5.0.5
         with:
           path: |
             ${{ env.cache }}
@@ -44,16 +46,15 @@ jobs:
             ${{ runner.os }}-go-
 
       - name: Download wintun
-        uses: carlosperate/download-file-action@v2
         id: download-wintun
+        uses: netbirdio/shared-actions/actions/win-download-and-verify@be5df6047383da2236e02243cceb857d8567c27e # v0.0.2
         with:
-          file-url: https://pkgs.netbird.io/wintun/wintun-0.14.1.zip
-          file-name: wintun.zip
-          location: ${{ env.downloadPath }}
-          sha256: '07c256185d6ee3652e09fa55c0b673e2624b565e02c4b9091c79ca7d2f24ef51'
+          url: https://pkgs.netbird.io/wintun/wintun-0.14.1.zip
+          destination: ${{ env.downloadPath }}\wintun.zip
+          sha256: 07c256185d6ee3652e09fa55c0b673e2624b565e02c4b9091c79ca7d2f24ef51
 
       - name: Decompressing wintun files
-        run: tar -zvxf "${{ steps.download-wintun.outputs.file-path }}" -C ${{ env.downloadPath }}
+        run: tar -xvf "${{ steps.download-wintun.outputs.file-path }}" -C ${{ env.downloadPath }}
 
       - run: mv ${{ env.downloadPath }}/wintun/bin/amd64/wintun.dll 'C:\Windows\System32\'
 

.github/workflows/golangci-lint.yml

@@ -15,9 +15,11 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - name: Checkout code
-        uses: actions/checkout@v4
+        uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
+        with:
+          persist-credentials: false
       - name: codespell
-        uses: codespell-project/actions-codespell@v2
+        uses: codespell-project/actions-codespell@8f01853be192eb0f849a5c7d721450e7a467c579 # v2.2
         with:
           ignore_words_list: erro,clienta,hastable,iif,groupd,testin,groupe,cros,ans,deriver,te,userA,ede,additionals
           skip: go.mod,go.sum,**/proxy/web/**
@@ -38,13 +40,15 @@ jobs:
     timeout-minutes: 15
     steps:
       - name: Checkout code
-        uses: actions/checkout@v4
+        uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
+        with:
+          persist-credentials: false
       - name: Check for duplicate constants
         if: matrix.os == 'ubuntu-latest'
         run: |
           ! awk '/const \(/,/)/{print $0}' management/server/activity/codes.go | grep -o '= [0-9]*' | sort | uniq -d | grep .
       - name: Install Go
-        uses: actions/setup-go@v5
+        uses: actions/setup-go@4b73464bb391d4059bd26b0524d20df3927bd417 # v6.3.0
         with:
           go-version-file: "go.mod"
           cache: false
@@ -52,7 +56,7 @@ jobs:
         if: matrix.os == 'ubuntu-latest'
         run: sudo apt update && sudo apt install -y -q libgtk-3-dev libayatana-appindicator3-dev libgl1-mesa-dev xorg-dev libpcap-dev
       - name: golangci-lint
-        uses: golangci/golangci-lint-action@4afd733a84b1f43292c63897423277bb7f4313a9 # v8.0.0
+        uses: golangci/golangci-lint-action@82606bf257cbaff209d206a39f5134f0cfbfd2ee #v9.2.1
         with:
           version: latest
           skip-cache: true

.github/workflows/install-script-test.yml

@@ -22,7 +22,9 @@ jobs:
     runs-on: ${{ matrix.os }}
     steps:
       - name: Checkout code
-        uses: actions/checkout@v4
+        uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
+        with:
+          persist-credentials: false
 
       - name: run install script
         env:

.github/workflows/mobile-build-validation.yml

@@ -16,23 +16,25 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - name: Checkout repository
-        uses: actions/checkout@v4
+        uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
+        with:
+          persist-credentials: false
       - name: Install Go
-        uses: actions/setup-go@v5
+        uses: actions/setup-go@4b73464bb391d4059bd26b0524d20df3927bd417 # v6.3.0
         with:
           go-version-file: "go.mod"
       - name: Setup Android SDK
-        uses: android-actions/setup-android@v3
+        uses: android-actions/setup-android@40fd30fb8d7440372e1316f5d1809ec01dcd3699 # v4.0.1
         with:
           cmdline-tools-version: 8512546
       - name: Setup Java
-        uses: actions/setup-java@v4
+        uses: actions/setup-java@be666c2fcd27ec809703dec50e508c2fdc7f6654
         with:
           java-version: "11"
           distribution: "adopt"
       - name: NDK Cache
         id: ndk-cache
-        uses: actions/cache@v4
+        uses: actions/cache@27d5ce7f107fe9357f9df03efb73ab90386fccae # v5.0.5
         with:
           path: /usr/local/lib/android/sdk/ndk
           key: ndk-cache-23.1.7779620
@@ -52,9 +54,11 @@ jobs:
     runs-on: macos-latest
     steps:
       - name: Checkout repository
-        uses: actions/checkout@v4
+        uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
+        with:
+          persist-credentials: false
       - name: Install Go
-        uses: actions/setup-go@v5
+        uses: actions/setup-go@4b73464bb391d4059bd26b0524d20df3927bd417 # v6.3.0
         with:
           go-version-file: "go.mod"
       - name: install gomobile

.github/workflows/pr-title-check.yml

@@ -9,7 +9,7 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - name: Validate PR title prefix
-        uses: actions/github-script@v7
+        uses: actions/github-script@3a2844b7e9c422d3c10d287c895573f7108da1b3 # v9.0.0
         with:
           script: |
             const title = context.payload.pull_request.title;

.github/workflows/proto-version-check.yml

@@ -10,7 +10,7 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - name: Check for proto tool version changes
-        uses: actions/github-script@v7
+        uses: actions/github-script@3a2844b7e9c422d3c10d287c895573f7108da1b3 # v9.0.0
         with:
           script: |
             const files = await github.paginate(github.rest.pulls.listFiles, {
@@ -20,34 +20,83 @@ jobs:
               per_page: 100,
             });
 
-            const pbFiles = files.filter(f => f.filename.endsWith('.pb.go'));
-            const missingPatch = pbFiles.filter(f => !f.patch).map(f => f.filename);
-            if (missingPatch.length > 0) {
-              core.setFailed(
-                `Cannot inspect patch data for:\n` +
-                missingPatch.map(f => `- ${f}`).join('\n') +
-                `\nThis can happen with very large PRs. Verify proto versions manually.`
-              );
+            // Cover renamed .pb.go files in addition to plain edits.
+            // Renamed entries land under the new path with previous_filename
+            // pointing at the base-side name, so we read the base content
+            // from the old path when present.
+            const changedPbFiles = files
+              .filter(f => (f.status === 'modified' || f.status === 'renamed')
+                && f.filename.endsWith('.pb.go'))
+              .map(f => ({
+                headPath: f.filename,
+                basePath: f.previous_filename || f.filename,
+              }));
+            if (changedPbFiles.length === 0) {
+              console.log('No modified or renamed .pb.go files to check');
               return;
             }
-            const versionPattern = /^[+-]\s*\/\/\s+protoc(?:-gen-go)?\s+v[\d.]+/;
-            const violations = [];
 
-            for (const file of pbFiles) {
-              const changed = file.patch
-                .split('\n')
-                .filter(line => versionPattern.test(line));
-              if (changed.length > 0) {
+            // Matches the generator version headers protoc writes at the top
+            // of generated files:
+            //   //   protoc           v3.21.12
+            //   //   protoc-gen-go    v1.26.0
+            //   // - protoc-gen-go-grpc v1.6.1   (grpc files prefix with "- ")
+            // The optional "- " prefix and the optional -gen-go / -gen-go-grpc
+            // suffixes keep the *_grpc.pb.go headers in scope.
+            const versionPattern = /^\s*\/\/\s+(?:-\s+)?protoc(?:-gen-go(?:-grpc)?)?\s+v[\d.]+/;
+            const baseSha = context.payload.pull_request.base.sha;
+            const headSha = context.payload.pull_request.head.sha;
+
+            async function getVersionHeader(path, ref) {
+              try {
+                const res = await github.rest.repos.getContent({
+                  owner: context.repo.owner,
+                  repo: context.repo.repo,
+                  path,
+                  ref,
+                });
+                if (!res.data.content) {
+                  return { ok: false, reason: 'no inline content (file too large)' };
+                }
+                const content = Buffer.from(res.data.content, 'base64').toString('utf8');
+                const lines = content
+                  .split('\n')
+                  .slice(0, 20)
+                  .filter(line => versionPattern.test(line));
+                return { ok: true, lines };
+              } catch (e) {
+                return { ok: false, reason: e.message };
+              }
+            }
+
+            const violations = [];
+            for (const file of changedPbFiles) {
+              const [base, head] = await Promise.all([
+                getVersionHeader(file.basePath, baseSha),
+                getVersionHeader(file.headPath, headSha),
+              ]);
+              if (!base.ok || !head.ok) {
+                core.warning(
+                  `Skipping ${file.headPath}: base=${base.ok ? 'ok' : base.reason}, head=${head.ok ? 'ok' : head.reason}`
+                );
+                continue;
+              }
+              if (base.lines.join('\n') !== head.lines.join('\n')) {
                 violations.push({
-                  file: file.filename,
-                  lines: changed,
+                  file: file.basePath === file.headPath
+                    ? file.headPath
+                    : `${file.basePath} → ${file.headPath}`,
+                  base: base.lines,
+                  head: head.lines,
                 });
               }
             }
 
             if (violations.length > 0) {
               const details = violations.map(v =>
-                `${v.file}:\n${v.lines.map(l => '  ' + l).join('\n')}`
+                `${v.file}:\n` +
+                `  base:\n${v.base.map(l => '    ' + l).join('\n') || '    (none)'}\n` +
+                `  head:\n${v.head.map(l => '    ' + l).join('\n') || '    (none)'}`
               ).join('\n\n');
 
               core.setFailed(

.github/workflows/release.yml

@@ -9,10 +9,13 @@ on:
   pull_request:
 
 env:
-  SIGN_PIPE_VER: "v0.1.4"
-  GORELEASER_VER: "v2.14.3"
+  SIGN_PIPE_VER: "v0.1.6"
+  GORELEASER_VER: "v2.16.0"
   PRODUCT_NAME: "NetBird"
   COPYRIGHT: "NetBird GmbH"
+  flags: ""
+  SKIP_PUBLISH: "true"
+  SKIP_DOCKER_PUSH: "false"
 
 concurrency:
   group: ${{ github.workflow }}-${{ github.ref }}-${{ github.head_ref || github.actor_id }}
@@ -24,13 +27,15 @@ jobs:
     runs-on: ubuntu-22.04
     steps:
       - name: Checkout
-        uses: actions/checkout@v4
+        uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
+        with:
+          persist-credentials: false
 
       - name: Generate FreeBSD port diff
-        run: bash release_files/freebsd-port-diff.sh
+        run: bash -x release_files/freebsd-port-diff.sh
 
       - name: Generate FreeBSD port issue body
-        run: bash release_files/freebsd-port-issue-body.sh
+        run: bash -x release_files/freebsd-port-issue-body.sh
 
       - name: Check if diff was generated
         id: check_diff
@@ -51,19 +56,26 @@ jobs:
           echo "Generated files for version: $VERSION"
           cat netbird-*.diff
 
+      - name: Read Go version from go.mod
+        id: goversion
+        run: echo "version=$(awk '/^go / {print $2}' go.mod)" >> "$GITHUB_OUTPUT"
+
       - name: Test FreeBSD port
         if: steps.check_diff.outputs.diff_exists == 'true'
-        uses: vmactions/freebsd-vm@v1
+        env:
+          GO_VERSION: ${{ steps.goversion.outputs.version }}
+        uses: vmactions/freebsd-vm@d1e65811565151536c0c894fff74f06351ed26e6 # v1.4.5
         with:
           usesh: true
           copyback: false
           release: "15.0"
+          envs: "GO_VERSION"
           prepare: |
             # Install required packages
-            pkg install -y git curl portlint go
+            pkg install -y git curl portlint
 
             # Install Go for building
-            GO_TARBALL="go1.25.5.freebsd-amd64.tar.gz"
+            GO_TARBALL="go${GO_VERSION}.freebsd-amd64.tar.gz"
             GO_URL="https://go.dev/dl/$GO_TARBALL"
             curl -LO "$GO_URL"
             tar -C /usr/local -xzf "$GO_TARBALL"
@@ -93,19 +105,19 @@ jobs:
 
             # Show patched Makefile
             version=$(cat security/netbird/Makefile | grep -E '^DISTVERSION=' | awk '{print $NF}')
-            
+
             cd /usr/ports/security/netbird
             export BATCH=yes
             make package
             pkg add ./work/pkg/netbird-*.pkg
-            
+
             netbird version | grep "$version"
 
             echo "FreeBSD port test completed successfully!"
 
       - name: Upload FreeBSD port files
         if: steps.check_diff.outputs.diff_exists == 'true'
-        uses: actions/upload-artifact@v4
+        uses: actions/upload-artifact@043fb46d1a93c77aae656e7c1c64a875d1fc6a0a #v7.0.1
         with:
           name: freebsd-port-files
           path: |
@@ -121,29 +133,45 @@ jobs:
       windows_packages_artifact_url: ${{ steps.upload_windows_packages.outputs.artifact-url }}
       macos_packages_artifact_url: ${{ steps.upload_macos_packages.outputs.artifact-url }}
       ghcr_images: ${{ steps.tag_and_push_images.outputs.images_markdown }}
-    env:
-      flags: ""
     steps:
-      - name: Parse semver string
-        id: semver_parser
-        uses: booxmedialtd/ws-action-parse-semver@v1
-        with:
-          input_string: ${{ (startsWith(github.ref, 'refs/tags/v') && github.ref) || 'refs/tags/v0.0.0' }}
-          version_extractor_regex: '\/v(.*)$'
-
-      - if: ${{ !startsWith(github.ref, 'refs/tags/v') }}
-        run: echo "flags=--snapshot" >> $GITHUB_ENV
       - name: Checkout
-        uses: actions/checkout@v4
+        uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
         with:
           fetch-depth: 0 # It is required for GoReleaser to work properly
+          persist-credentials: false
+
+      - name: Parse semver string
+        id: semver_parser
+        uses: netbirdio/shared-actions/actions/parse-semver@be5df6047383da2236e02243cceb857d8567c27e # v0.0.2
+
+      - name: Set snapshot flag
+        if: ${{ !startsWith(github.ref, 'refs/tags/v') }}
+        run: | 
+          echo "flags=--snapshot" >> $GITHUB_ENV
+
+      - name: Set build vars
+        if: ${{ startsWith(github.ref, 'refs/tags/v') }}
+        run: |
+          if [[ "x-${{ steps.semver_parser.outputs.prerelease }}" == "x-" && "x-${{ github.repository }}" == "x-netbirdio/netbird" ]]; then
+            echo "x-${{ github.repository }}" 
+            echo "x-${{ steps.semver_parser.outputs.prerelease }}"
+            echo "SKIP_PUBLISH=false" >> $GITHUB_ENV
+          else
+            echo "x-${{ github.repository }}" 
+            echo "x-${{ steps.semver_parser.outputs.prerelease }}"
+          fi
+          
+          if [[ "x-${{ github.repository }}" != "x-netbirdio/netbird" ]]; then
+            echo "SKIP_DOCKER_PUSH=true" >> $GITHUB_ENV
+          fi
+
       - name: Set up Go
-        uses: actions/setup-go@v5
+        uses: actions/setup-go@4b73464bb391d4059bd26b0524d20df3927bd417 # v6.3.0
         with:
           go-version-file: "go.mod"
           cache: false
       - name: Cache Go modules
-        uses: actions/cache@v4
+        uses: actions/cache/restore@27d5ce7f107fe9357f9df03efb73ab90386fccae # v5.0.5
         with:
           path: |
             ~/go/pkg/mod
@@ -153,21 +181,23 @@ jobs:
             ${{ runner.os }}-go-releaser-
       - name: Install modules
         run: go mod tidy
+      - name: run openapi generator
+        run: bash shared/management/http/api/generate.sh
       - name: check git status
         run: git --no-pager diff --exit-code
       - name: Set up QEMU
-        uses: docker/setup-qemu-action@v2
+        uses: docker/setup-qemu-action@ce360397dd3f832beb865e1373c09c0e9f86d70a #v4.0.0
       - name: Set up Docker Buildx
-        uses: docker/setup-buildx-action@v2
+        uses: docker/setup-buildx-action@4d04d5d9486b7bd6fa91e7baf45bbb4f8b9deedd #v4.0.0
       - name: Login to Docker hub
         if: github.event_name != 'pull_request'
-        uses: docker/login-action@v1
+        uses: docker/login-action@650006c6eb7dba73a995cc03b0b2d7f5ca915bee # v4.2.0
         with:
           username: ${{ secrets.DOCKER_USER }}
           password: ${{ secrets.DOCKER_TOKEN }}
       - name: Log in to the GitHub container registry
         if: github.event_name != 'pull_request' || github.event.pull_request.head.repo.full_name == github.repository
-        uses: docker/login-action@v3
+        uses: docker/login-action@650006c6eb7dba73a995cc03b0b2d7f5ca915bee # v4.2.0
         with:
           registry: ghcr.io
           username: ${{ github.actor }}
@@ -191,7 +221,7 @@ jobs:
         run: goversioninfo -arm -64 -icon client/ui/assets/netbird.ico -manifest client/manifest.xml -product-name ${{ env.PRODUCT_NAME }} -copyright "${{ env.COPYRIGHT }}" -ver-major ${{ steps.semver_parser.outputs.major }} -ver-minor ${{ steps.semver_parser.outputs.minor }} -ver-patch ${{ steps.semver_parser.outputs.patch }} -ver-build 0 -file-version ${{ steps.semver_parser.outputs.fullversion }}.0 -product-version ${{ steps.semver_parser.outputs.fullversion }}.0 -o client/resources_windows_arm64.syso
       - name: Run GoReleaser
         id: goreleaser
-        uses: goreleaser/goreleaser-action@v4
+        uses: goreleaser/goreleaser-action@4c6ab561adb47e50c45ef534e2155934e91c40c1 # v7.2.0
         with:
           version: ${{ env.GORELEASER_VER }}
           args: release --clean ${{ env.flags }}
@@ -202,6 +232,8 @@ jobs:
           UPLOAD_YUM_SECRET: ${{ secrets.PKG_UPLOAD_SECRET }}
           GPG_RPM_KEY_FILE: ${{ env.GPG_RPM_KEY_FILE }}
           NFPM_NETBIRD_RPM_PASSPHRASE: ${{ secrets.GPG_RPM_PASSPHRASE }}
+          SKIP_PUBLISH: ${{ env.SKIP_PUBLISH }}
+          SKIP_DOCKER_PUSH: ${{ env.SKIP_DOCKER_PUSH }}
       - name: Verify RPM signatures
         run: |
           docker run --rm -v $(pwd)/dist:/dist fedora:41 bash -c '
@@ -282,28 +314,28 @@ jobs:
           } >> "$GITHUB_OUTPUT"
       - name: upload non tags for debug purposes
         id: upload_release
-        uses: actions/upload-artifact@v4
+        uses: actions/upload-artifact@043fb46d1a93c77aae656e7c1c64a875d1fc6a0a #v7.0.1
         with:
           name: release
           path: dist/
           retention-days: 7
       - name: upload linux packages
         id: upload_linux_packages
-        uses: actions/upload-artifact@v4
+        uses: actions/upload-artifact@043fb46d1a93c77aae656e7c1c64a875d1fc6a0a #v7.0.1
         with:
           name: linux-packages
           path: dist/netbird_linux**
           retention-days: 7
       - name: upload windows packages
         id: upload_windows_packages
-        uses: actions/upload-artifact@v4
+        uses: actions/upload-artifact@043fb46d1a93c77aae656e7c1c64a875d1fc6a0a #v7.0.1
         with:
           name: windows-packages
           path: dist/netbird_windows**
           retention-days: 7
       - name: upload macos packages
         id: upload_macos_packages
-        uses: actions/upload-artifact@v4
+        uses: actions/upload-artifact@043fb46d1a93c77aae656e7c1c64a875d1fc6a0a #v7.0.1
         with:
           name: macos-packages
           path: dist/netbird_darwin**
@@ -314,27 +346,40 @@ jobs:
     outputs:
       release_ui_artifact_url: ${{ steps.upload_release_ui.outputs.artifact-url }}
     steps:
-      - name: Parse semver string
-        id: semver_parser
-        uses: booxmedialtd/ws-action-parse-semver@v1
-        with:
-          input_string: ${{ (startsWith(github.ref, 'refs/tags/v') && github.ref) || 'refs/tags/v0.0.0' }}
-          version_extractor_regex: '\/v(.*)$'
-
-      - if: ${{ !startsWith(github.ref, 'refs/tags/v') }}
-        run: echo "flags=--snapshot" >> $GITHUB_ENV
       - name: Checkout
-        uses: actions/checkout@v4
+        uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
         with:
           fetch-depth: 0 # It is required for GoReleaser to work properly
+          persist-credentials: false
+
+      - name: Parse semver string
+        id: semver_parser
+        uses: netbirdio/shared-actions/actions/parse-semver@be5df6047383da2236e02243cceb857d8567c27e # v0.0.2
+
+      - name: Set snapshot flag
+        if: ${{ !startsWith(github.ref, 'refs/tags/v') }}
+        run: |
+          echo "flags=--snapshot" >> $GITHUB_ENV
+
+      - name: Set build vars
+        if: ${{ startsWith(github.ref, 'refs/tags/v') }}
+        run: |
+          if [[ "x-${{ steps.semver_parser.outputs.prerelease }}" == "x-" && "x-${{ github.repository }}" == "x-netbirdio/netbird" ]]; then
+            echo "x-${{ github.repository }}" 
+            echo "x-${{ steps.semver_parser.outputs.prerelease }}"
+            echo "SKIP_PUBLISH=false" >> $GITHUB_ENV
+          else
+            echo "x-${{ github.repository }}" 
+            echo "x-${{ steps.semver_parser.outputs.prerelease }}"
+          fi
 
       - name: Set up Go
-        uses: actions/setup-go@v5
+        uses: actions/setup-go@4b73464bb391d4059bd26b0524d20df3927bd417 # v6.3.0
         with:
           go-version-file: "go.mod"
           cache: false
       - name: Cache Go modules
-        uses: actions/cache@v4
+        uses: actions/cache@27d5ce7f107fe9357f9df03efb73ab90386fccae # v5.0.5
         with:
           path: |
             ~/go/pkg/mod
@@ -375,7 +420,7 @@ jobs:
         run: goversioninfo -arm -64 -icon client/ui/assets/netbird.ico -manifest client/ui/manifest.xml -product-name ${{ env.PRODUCT_NAME }}-"UI" -copyright "${{ env.COPYRIGHT }}" -ver-major ${{ steps.semver_parser.outputs.major }} -ver-minor ${{ steps.semver_parser.outputs.minor }} -ver-patch ${{ steps.semver_parser.outputs.patch }} -ver-build 0 -file-version ${{ steps.semver_parser.outputs.fullversion }}.0 -product-version ${{ steps.semver_parser.outputs.fullversion }}.0 -o client/ui/resources_windows_arm64.syso
 
       - name: Run GoReleaser
-        uses: goreleaser/goreleaser-action@v4
+        uses: goreleaser/goreleaser-action@4c6ab561adb47e50c45ef534e2155934e91c40c1 # v7.2.0
         with:
           version: ${{ env.GORELEASER_VER }}
           args: release --config .goreleaser_ui.yaml --clean ${{ env.flags }}
@@ -386,6 +431,7 @@ jobs:
           UPLOAD_YUM_SECRET: ${{ secrets.PKG_UPLOAD_SECRET }}
           GPG_RPM_KEY_FILE: ${{ env.GPG_RPM_KEY_FILE }}
           NFPM_NETBIRD_UI_RPM_PASSPHRASE: ${{ secrets.GPG_RPM_PASSPHRASE }}
+          SKIP_PUBLISH: ${{ env.SKIP_PUBLISH }}
       - name: Verify RPM signatures
         run: |
           docker run --rm -v $(pwd)/dist:/dist fedora:41 bash -c '
@@ -404,7 +450,7 @@ jobs:
         run: rm -f /tmp/gpg-rpm-signing-key.asc
       - name: upload non tags for debug purposes
         id: upload_release_ui
-        uses: actions/upload-artifact@v4
+        uses: actions/upload-artifact@043fb46d1a93c77aae656e7c1c64a875d1fc6a0a #v7.0.1
         with:
           name: release-ui
           path: dist/
@@ -418,16 +464,17 @@ jobs:
       - if: ${{ !startsWith(github.ref, 'refs/tags/v') }}
         run: echo "flags=--snapshot" >> $GITHUB_ENV
       - name: Checkout
-        uses: actions/checkout@v4
+        uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
         with:
           fetch-depth: 0 # It is required for GoReleaser to work properly
+          persist-credentials: false
       - name: Set up Go
-        uses: actions/setup-go@v5
+        uses: actions/setup-go@4b73464bb391d4059bd26b0524d20df3927bd417 # v6.3.0
         with:
           go-version-file: "go.mod"
           cache: false
       - name: Cache Go modules
-        uses: actions/cache@v4
+        uses: actions/cache@27d5ce7f107fe9357f9df03efb73ab90386fccae # v5.0.5
         with:
           path: |
             ~/go/pkg/mod
@@ -441,7 +488,7 @@ jobs:
         run: git --no-pager diff --exit-code
       - name: Run GoReleaser
         id: goreleaser
-        uses: goreleaser/goreleaser-action@v4
+        uses: goreleaser/goreleaser-action@4c6ab561adb47e50c45ef534e2155934e91c40c1 # v7.2.0
         with:
           version: ${{ env.GORELEASER_VER }}
           args: release --config .goreleaser_ui_darwin.yaml --clean ${{ env.flags }}
@@ -449,7 +496,7 @@ jobs:
           GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
       - name: upload non tags for debug purposes
         id: upload_release_ui_darwin
-        uses: actions/upload-artifact@v4
+        uses: actions/upload-artifact@043fb46d1a93c77aae656e7c1c64a875d1fc6a0a #v7.0.1
         with:
           name: release-ui-darwin
           path: dist/
@@ -474,27 +521,26 @@ jobs:
       PackageWorkdir: netbird_windows_${{ matrix.arch }}
       downloadPath: '${{ github.workspace }}\temp'
     steps:
+      - name: Checkout
+        uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
+        with:
+          persist-credentials: false
+
       - name: Parse semver string
         id: semver_parser
-        uses: booxmedialtd/ws-action-parse-semver@v1
-        with:
-          input_string: ${{ (startsWith(github.ref, 'refs/tags/v') && github.ref) || 'refs/tags/v0.0.0' }}
-          version_extractor_regex: '\/v(.*)$'
-
-      - name: Checkout
-        uses: actions/checkout@v4
+        uses: netbirdio/shared-actions/actions/parse-semver@be5df6047383da2236e02243cceb857d8567c27e # v0.0.2
 
       - name: Add 7-Zip to PATH
         run: echo "C:\Program Files\7-Zip" | Out-File -FilePath $env:GITHUB_PATH -Encoding utf8 -Append
 
       - name: Download release artifacts
-        uses: actions/download-artifact@v4
+        uses: actions/download-artifact@70fc10c6e5e1ce46ad2ea6f2b72d43f7d47b13c3 # v8.0.1
         with:
           name: release
           path: release
 
       - name: Download UI release artifacts
-        uses: actions/download-artifact@v4
+        uses: actions/download-artifact@70fc10c6e5e1ce46ad2ea6f2b72d43f7d47b13c3 # v8.0.1
         with:
           name: release-ui
           path: release-ui
@@ -514,29 +560,27 @@ jobs:
           Get-ChildItem $workdir
 
       - name: Download wintun
-        uses: carlosperate/download-file-action@v2
         id: download-wintun
+        uses: netbirdio/shared-actions/actions/win-download-and-verify@be5df6047383da2236e02243cceb857d8567c27e # v0.0.2
         with:
-          file-url: https://pkgs.netbird.io/wintun/wintun-0.14.1.zip
-          file-name: wintun.zip
-          location: ${{ env.downloadPath }}
-          sha256: '07c256185d6ee3652e09fa55c0b673e2624b565e02c4b9091c79ca7d2f24ef51'
+          url: https://pkgs.netbird.io/wintun/wintun-0.14.1.zip
+          destination: ${{ env.downloadPath }}\wintun.zip
+          sha256: 07c256185d6ee3652e09fa55c0b673e2624b565e02c4b9091c79ca7d2f24ef51
 
       - name: Decompress wintun files
-        run: tar -zvxf "${{ steps.download-wintun.outputs.file-path }}" -C ${{ env.downloadPath }}
+        run: tar -xvf "${{ env.downloadPath }}\wintun.zip" -C ${{ env.downloadPath }}
 
       - name: Move wintun.dll into dist
         run: mv ${{ env.downloadPath }}\wintun\bin\${{ matrix.wintun_arch }}\wintun.dll ${{ github.workspace }}\dist\${{ env.PackageWorkdir }}\
 
       - name: Download Mesa3D (amd64 only)
-        uses: carlosperate/download-file-action@v2
         id: download-mesa3d
         if: matrix.arch == 'amd64'
+        uses: netbirdio/shared-actions/actions/win-download-and-verify@be5df6047383da2236e02243cceb857d8567c27e # v0.0.2
         with:
-          file-url: https://downloads.fdossena.com/Projects/Mesa3D/Builds/MesaForWindows-x64-20.1.8.7z
-          file-name: mesa3d.7z
-          location: ${{ env.downloadPath }}
-          sha256: '71c7cb64ec229a1d6b8d62fa08e1889ed2bd17c0eeede8689daf0f25cb31d6b9'
+          url: https://pkgs.netbird.io/mesa3d/MesaForWindows-x64-20.1.8.7z
+          destination: ${{ env.downloadPath }}\mesa3d.7z
+          sha256: 71c7cb64ec229a1d6b8d62fa08e1889ed2bd17c0eeede8689daf0f25cb31d6b9
 
       - name: Extract Mesa3D driver (amd64 only)
         if: matrix.arch == 'amd64'
@@ -547,35 +591,38 @@ jobs:
         run: mv ${{ env.downloadPath }}\opengl32.dll ${{ github.workspace }}\dist\${{ env.PackageWorkdir }}\
 
       - name: Download EnVar plugin for NSIS
-        uses: carlosperate/download-file-action@v2
+        uses: netbirdio/shared-actions/actions/win-download-and-verify@be5df6047383da2236e02243cceb857d8567c27e # v0.0.2
         with:
-          file-url: https://nsis.sourceforge.io/mediawiki/images/7/7f/EnVar_plugin.zip
-          file-name: envar_plugin.zip
-          location: ${{ github.workspace }}
+          url: https://pkgs.netbird.io/nsis/EnVar_plugin.zip
+          destination: ${{ github.workspace }}\envar_plugin.zip
+          sha256: e9aa92de351345ed82795251d838f1ae9041ba35af9d381a5780c7843b01f56a
 
       - name: Extract EnVar plugin
         run: 7z x -o"${{ github.workspace }}/NSIS_Plugins" "${{ github.workspace }}/envar_plugin.zip"
 
       - name: Download ShellExecAsUser plugin for NSIS (amd64 only)
-        uses: carlosperate/download-file-action@v2
         if: matrix.arch == 'amd64'
+        uses: netbirdio/shared-actions/actions/win-download-and-verify@be5df6047383da2236e02243cceb857d8567c27e # v0.0.2
         with:
-          file-url: https://nsis.sourceforge.io/mediawiki/images/6/68/ShellExecAsUser_amd64-Unicode.7z
-          file-name: ShellExecAsUser_amd64-Unicode.7z
-          location: ${{ github.workspace }}
+          url: https://pkgs.netbird.io/nsis/ShellExecAsUser_amd64-Unicode.7z
+          destination: ${{ github.workspace }}\ShellExecAsUser_amd64-Unicode.7z
+          sha256: 0a55ea25c7330a92cec028eda8afcaf1b1a7092e0dfb77c21c8f654564b4ff9d
 
       - name: Extract ShellExecAsUser plugin (amd64 only)
         if: matrix.arch == 'amd64'
         run: 7z x -o"${{ github.workspace }}/NSIS_Plugins" "${{ github.workspace }}/ShellExecAsUser_amd64-Unicode.7z"
 
       - name: Build NSIS installer
-        uses: joncloud/makensis-action@v3.3
-        with:
-          additional-plugin-paths: ${{ github.workspace }}/NSIS_Plugins/Plugins
-          script-file: client/installer.nsis
-          arguments: "/V4 /DARCH=${{ matrix.arch }}"
+        shell: pwsh
         env:
           APPVER: ${{ steps.semver_parser.outputs.major }}.${{ steps.semver_parser.outputs.minor }}.${{ steps.semver_parser.outputs.patch }}.${{ github.run_id }}
+        run: |
+          $nsisPluginDir = "C:\Program Files (x86)\NSIS\Plugins\x86-unicode"
+          $srcPlugins    = "${{ github.workspace }}\NSIS_Plugins\Plugins"
+          Get-ChildItem -Path $srcPlugins -Recurse -Filter *.dll |
+            Copy-Item -Destination $nsisPluginDir -Force
+          & "C:\Program Files (x86)\NSIS\makensis.exe" /V4 "/DARCH=${{ matrix.arch }}" client\installer.nsis
+          if ($LASTEXITCODE -ne 0) { throw "makensis failed with exit code $LASTEXITCODE" }
 
       - name: Rename NSIS installer
         run: mv netbird-installer.exe netbird_installer_test_windows_${{ matrix.arch }}.exe
@@ -592,7 +639,7 @@ jobs:
 
       - name: Upload installer artifacts
         if: always()
-        uses: actions/upload-artifact@v4
+        uses: actions/upload-artifact@043fb46d1a93c77aae656e7c1c64a875d1fc6a0a #v7.0.1
         with:
           name: windows-installer-test-${{ matrix.arch }}
           path: |
@@ -611,7 +658,7 @@ jobs:
       pull-requests: write
     steps:
       - name: Create or update PR comment
-        uses: actions/github-script@v7
+        uses: actions/github-script@3a2844b7e9c422d3c10d287c895573f7108da1b3 # v9.0.0
         env:
           RELEASE_RESULT: ${{ needs.release.result }}
           RELEASE_UI_RESULT: ${{ needs.release_ui.result }}
@@ -703,7 +750,7 @@ jobs:
     if: startsWith(github.ref, 'refs/tags/')
     steps:
       - name: Trigger binaries sign pipelines
-        uses: benc-uk/workflow-dispatch@v1
+        uses: benc-uk/workflow-dispatch@31e2b3319479a63f0ab15bf800eff9e913504e26 # v1.3.2
         with:
           workflow: Sign bin and installer
           repo: netbirdio/sign-pipelines

.github/workflows/sync-main.yml

@@ -14,9 +14,9 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - name: Trigger main branch sync
-        uses: benc-uk/workflow-dispatch@v1
+        uses: benc-uk/workflow-dispatch@31e2b3319479a63f0ab15bf800eff9e913504e26 # v1.3.2
         with:
           workflow: sync-main.yml
           repo: ${{ secrets.UPSTREAM_REPO }}
           token: ${{ secrets.NC_GITHUB_TOKEN }}
-          inputs: '{ "sha": "${{ github.sha }}" }'
+          inputs: '{ "sha": "${{ github.sha }}" }'

.github/workflows/sync-tag.yml

@@ -3,7 +3,7 @@ name: sync tag
 on:
   push:
     tags:
-      - 'v*'
+      - "v*"
 
 concurrency:
   group: ${{ github.workflow }}-${{ github.ref }}-${{ github.head_ref || github.actor_id }}
@@ -16,7 +16,7 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - name: Trigger release tag sync
-        uses: benc-uk/workflow-dispatch@v1
+        uses: benc-uk/workflow-dispatch@31e2b3319479a63f0ab15bf800eff9e913504e26 # v1.3.2
         with:
           workflow: sync-tag.yml
           ref: main
@@ -29,7 +29,7 @@ jobs:
     if: github.event.created && !github.event.deleted && startsWith(github.ref, 'refs/tags/v') && !contains(github.ref_name, '-')
     steps:
       - name: Trigger android-client submodule bump
-        uses: benc-uk/workflow-dispatch@7a027648b88c2413826b6ddd6c76114894dc5ec4 # v1.3.1
+        uses: benc-uk/workflow-dispatch@31e2b3319479a63f0ab15bf800eff9e913504e26 # v1.3.2
         with:
           workflow: bump-netbird.yml
           ref: main
@@ -42,10 +42,10 @@ jobs:
     if: github.event.created && !github.event.deleted && startsWith(github.ref, 'refs/tags/v') && !contains(github.ref_name, '-')
     steps:
       - name: Trigger ios-client submodule bump
-        uses: benc-uk/workflow-dispatch@7a027648b88c2413826b6ddd6c76114894dc5ec4 # v1.3.1
+        uses: benc-uk/workflow-dispatch@31e2b3319479a63f0ab15bf800eff9e913504e26 # v1.3.2
         with:
           workflow: bump-netbird.yml
           ref: main
           repo: netbirdio/ios-client
           token: ${{ secrets.NC_GITHUB_TOKEN }}
-          inputs: '{ "tag": "${{ github.ref_name }}" }'
+          inputs: '{ "tag": "${{ github.ref_name }}" }'

.github/workflows/test-infrastructure-files.yml

@@ -6,10 +6,10 @@ on:
       - main
   pull_request:
     paths:
-      - 'infrastructure_files/**'
-      - '.github/workflows/test-infrastructure-files.yml'
-      - 'management/cmd/**'
-      - 'signal/cmd/**'
+      - "infrastructure_files/**"
+      - ".github/workflows/test-infrastructure-files.yml"
+      - "management/cmd/**"
+      - "signal/cmd/**"
 
 concurrency:
   group: ${{ github.workflow }}-${{ github.ref }}-${{ github.head_ref || github.actor_id }}
@@ -20,7 +20,7 @@ jobs:
     runs-on: ubuntu-latest
     strategy:
       matrix:
-        store: [ 'sqlite', 'postgres', 'mysql' ]
+        store: ["sqlite", "postgres", "mysql"]
     services:
       postgres:
         image: ${{ (matrix.store == 'postgres') && 'postgres' || '' }}
@@ -68,15 +68,17 @@ jobs:
         run: sudo apt-get install -y curl
 
       - name: Checkout code
-        uses: actions/checkout@v4
+        uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
+        with:
+          persist-credentials: false
 
       - name: Install Go
-        uses: actions/setup-go@v5
+        uses: actions/setup-go@4b73464bb391d4059bd26b0524d20df3927bd417 # v6.3.0
         with:
           go-version-file: "go.mod"
 
       - name: Cache Go modules
-        uses: actions/cache@v4
+        uses: actions/cache@27d5ce7f107fe9357f9df03efb73ab90386fccae # v5.0.5
         with:
           path: ~/go/pkg/mod
           key: ${{ runner.os }}-go-${{ hashFiles('**/go.sum') }}
@@ -139,8 +141,8 @@ jobs:
           CI_NETBIRD_IDP_MGMT_CLIENT_SECRET: testing.client.secret
           CI_NETBIRD_SIGNAL_PORT: 12345
           CI_NETBIRD_STORE_CONFIG_ENGINE: ${{ matrix.store }}
-          NETBIRD_STORE_ENGINE_POSTGRES_DSN: '${{ env.NETBIRD_STORE_ENGINE_POSTGRES_DSN }}$'
-          NETBIRD_STORE_ENGINE_MYSQL_DSN: '${{ env.NETBIRD_STORE_ENGINE_MYSQL_DSN }}$'
+          NETBIRD_STORE_ENGINE_POSTGRES_DSN: "${{ env.NETBIRD_STORE_ENGINE_POSTGRES_DSN }}$"
+          NETBIRD_STORE_ENGINE_MYSQL_DSN: "${{ env.NETBIRD_STORE_ENGINE_MYSQL_DSN }}$"
           CI_NETBIRD_MGMT_IDP_SIGNKEY_REFRESH: false
           CI_NETBIRD_TURN_EXTERNAL_IP: "1.2.3.4"
           CI_NETBIRD_MGMT_DISABLE_DEFAULT_POLICY: false
@@ -254,7 +256,9 @@ jobs:
         run: sudo apt-get install -y jq
 
       - name: Checkout code
-        uses: actions/checkout@v4
+        uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
+        with:
+          persist-credentials: false
 
       - name: run script with Zitadel PostgreSQL
         run: NETBIRD_DOMAIN=use-ip bash -x infrastructure_files/getting-started-with-zitadel.sh

.github/workflows/update-docs.yml

@@ -3,9 +3,9 @@ name: update docs
 on:
   push:
     tags:
-      - 'v*'
+      - "v*"
     paths:
-      - 'shared/management/http/api/openapi.yml'
+      - "shared/management/http/api/openapi.yml"
 
 jobs:
   trigger_docs_api_update:
@@ -13,10 +13,10 @@ jobs:
     if: startsWith(github.ref, 'refs/tags/')
     steps:
       - name: Trigger API pages generation
-        uses: benc-uk/workflow-dispatch@v1
+        uses: benc-uk/workflow-dispatch@31e2b3319479a63f0ab15bf800eff9e913504e26 # v1.3.2
         with:
           workflow: generate api pages
           repo: netbirdio/docs
           ref: "refs/heads/main"
           token: ${{ secrets.SIGN_GITHUB_TOKEN }}
-          inputs: '{ "tag": "${{ github.ref }}" }'
+          inputs: '{ "tag": "${{ github.ref }}" }'

.github/workflows/wasm-build-validation.yml

@@ -19,15 +19,17 @@ jobs:
       GOARCH: wasm
     steps:
       - name: Checkout repository
-        uses: actions/checkout@v4
+        uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
+        with:
+          persist-credentials: false
       - name: Install Go
-        uses: actions/setup-go@v5
+        uses: actions/setup-go@4b73464bb391d4059bd26b0524d20df3927bd417 # v6.3.0
         with:
           go-version-file: "go.mod"
       - name: Install dependencies
         run: sudo apt update && sudo apt install -y -q libgtk-3-dev libayatana-appindicator3-dev libgl1-mesa-dev xorg-dev libpcap-dev
       - name: Install golangci-lint
-        uses: golangci/golangci-lint-action@4afd733a84b1f43292c63897423277bb7f4313a9 # v8.0.0
+        uses: golangci/golangci-lint-action@82606bf257cbaff209d206a39f5134f0cfbfd2ee #v9.2.1
         with:
           version: latest
           install-mode: binary
@@ -42,9 +44,11 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - name: Checkout repository
-        uses: actions/checkout@v4
+        uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
+        with:
+          persist-credentials: false
       - name: Install Go
-        uses: actions/setup-go@v5
+        uses: actions/setup-go@4b73464bb391d4059bd26b0524d20df3927bd417 # v6.3.0
         with:
           go-version-file: "go.mod"
       - name: Build Wasm client
@@ -61,8 +65,7 @@ jobs:
 
           echo "Size: ${SIZE} bytes (${SIZE_MB} MB)"
 
-          if [ ${SIZE} -gt 58720256 ]; then
-            echo "Wasm binary size (${SIZE_MB}MB) exceeds 56MB limit!"
+          if [ ${SIZE} -gt 62914560 ]; then
+            echo "Wasm binary size (${SIZE_MB}MB) exceeds 60MB limit!"
             exit 1
           fi
-

.goreleaser.yaml

@@ -1,5 +1,7 @@
 version: 2
-
+env:
+  - SKIP_PUBLISH={{ if index .Env "SKIP_PUBLISH" }}{{ .Env.SKIP_PUBLISH }}{{ else }}true{{ end }}
+  - SKIP_DOCKER_PUSH={{ if index .Env "SKIP_DOCKER_PUSH" }}{{ .Env.SKIP_DOCKER_PUSH }}{{ else }}false{{ end }}
 project_name: netbird
 builds:
   - id: netbird-wasm
@@ -74,6 +76,8 @@ builds:
       - amd64
       - arm64
       - arm
+    goarm:
+      - 7
     ldflags:
       - -s -w -X github.com/netbirdio/netbird/version.version={{.Version}} -X main.commit={{.Commit}} -X main.date={{.CommitDate}} -X main.builtBy=goreleaser
     mod_timestamp: "{{ .CommitTimestamp }}"
@@ -88,6 +92,8 @@ builds:
       - amd64
       - arm64
       - arm
+    goarm:
+      - 7
     ldflags:
       - -s -w -X github.com/netbirdio/netbird/version.version={{.Version}} -X main.commit={{.Commit}} -X main.date={{.CommitDate}} -X main.builtBy=goreleaser
     mod_timestamp: "{{ .CommitTimestamp }}"
@@ -102,6 +108,8 @@ builds:
       - amd64
       - arm64
       - arm
+    goarm:
+      - 7
     ldflags:
       - -s -w -X github.com/netbirdio/netbird/version.version={{.Version}} -X main.commit={{.Commit}} -X main.date={{.CommitDate}} -X main.builtBy=goreleaser
     mod_timestamp: "{{ .CommitTimestamp }}"
@@ -122,6 +130,8 @@ builds:
       - amd64
       - arm64
       - arm
+    goarm:
+      - 7
     ldflags:
       - -s -w -X github.com/netbirdio/netbird/version.version={{.Version}} -X main.commit={{.Commit}} -X main.date={{.CommitDate}} -X main.builtBy=goreleaser
     mod_timestamp: "{{ .CommitTimestamp }}"
@@ -136,6 +146,8 @@ builds:
       - amd64
       - arm64
       - arm
+    goarm:
+      - 7
     ldflags:
       - -s -w -X github.com/netbirdio/netbird/version.version={{.Version}} -X main.commit={{.Commit}} -X main.date={{.CommitDate}} -X main.builtBy=goreleaser
     mod_timestamp: "{{ .CommitTimestamp }}"
@@ -150,6 +162,8 @@ builds:
       - amd64
       - arm64
       - arm
+    goarm:
+      - 7
     ldflags:
       - -s -w -X main.Version={{.Version}} -X main.Commit={{.Commit}} -X main.BuildDate={{.CommitDate}}
     mod_timestamp: "{{ .CommitTimestamp }}"
@@ -170,6 +184,8 @@ builds:
       - amd64
       - arm64
       - arm
+    goarm:
+      - 7
     ldflags:
       - -s -w -X github.com/netbirdio/netbird/version.version={{.Version}} -X main.commit={{.Commit}} -X main.date={{.CommitDate}} -X main.builtBy=goreleaser
     mod_timestamp: "{{ .CommitTimestamp }}"
@@ -222,670 +238,192 @@ nfpms:
     rpm:
       signature:
         key_file: '{{ if index .Env "GPG_RPM_KEY_FILE" }}{{ .Env.GPG_RPM_KEY_FILE }}{{ end }}'
-dockers:
-  - image_templates:
-      - netbirdio/netbird:{{ .Version }}-amd64
-      - ghcr.io/netbirdio/netbird:{{ .Version }}-amd64
-    ids:
-      - netbird
-    goarch: amd64
-    use: buildx
-    dockerfile: client/Dockerfile
-    extra_files:
-      - client/netbird-entrypoint.sh
-    build_flag_templates:
-      - "--platform=linux/amd64"
-      - "--label=org.opencontainers.image.created={{.Date}}"
-      - "--label=org.opencontainers.image.title={{.ProjectName}}"
-      - "--label=org.opencontainers.image.version={{.Version}}"
-      - "--label=org.opencontainers.image.revision={{.FullCommit}}"
-      - "--label=org.opencontainers.image.source=https://github.com/netbirdio/{{.ProjectName}}"
-      - "--label=maintainer=dev@netbird.io"
-  - image_templates:
-      - netbirdio/netbird:{{ .Version }}-arm64v8
-      - ghcr.io/netbirdio/netbird:{{ .Version }}-arm64v8
-    ids:
-      - netbird
-    goarch: arm64
-    use: buildx
-    dockerfile: client/Dockerfile
-    extra_files:
-      - client/netbird-entrypoint.sh
-    build_flag_templates:
-      - "--platform=linux/arm64"
-      - "--label=org.opencontainers.image.created={{.Date}}"
-      - "--label=org.opencontainers.image.title={{.ProjectName}}"
-      - "--label=org.opencontainers.image.version={{.Version}}"
-      - "--label=org.opencontainers.image.revision={{.FullCommit}}"
-      - "--label=org.opencontainers.image.source=https://github.com/netbirdio/{{.ProjectName}}"
-      - "--label=maintainer=dev@netbird.io"
-  - image_templates:
-      - netbirdio/netbird:{{ .Version }}-arm
-      - ghcr.io/netbirdio/netbird:{{ .Version }}-arm
-    ids:
-      - netbird
-    goarch: arm
-    goarm: 6
-    use: buildx
-    dockerfile: client/Dockerfile
-    extra_files:
-      - client/netbird-entrypoint.sh
-    build_flag_templates:
-      - "--platform=linux/arm"
-      - "--label=org.opencontainers.image.created={{.Date}}"
-      - "--label=org.opencontainers.image.title={{.ProjectName}}"
-      - "--label=org.opencontainers.image.version={{.Version}}"
-      - "--label=org.opencontainers.image.revision={{.FullCommit}}"
-      - "--label=org.opencontainers.image.source=https://github.com/netbirdio/{{.ProjectName}}"
-      - "--label=maintainer=dev@netbird.io"
-
-  - image_templates:
-      - netbirdio/netbird:{{ .Version }}-rootless-amd64
-      - ghcr.io/netbirdio/netbird:{{ .Version }}-rootless-amd64
-    ids:
-      - netbird
-    goarch: amd64
-    use: buildx
-    dockerfile: client/Dockerfile-rootless
-    extra_files:
-      - client/netbird-entrypoint.sh
-    build_flag_templates:
-      - "--platform=linux/amd64"
-      - "--label=org.opencontainers.image.created={{.Date}}"
-      - "--label=org.opencontainers.image.title={{.ProjectName}}"
-      - "--label=org.opencontainers.image.version={{.Version}}"
-      - "--label=org.opencontainers.image.revision={{.FullCommit}}"
-      - "--label=org.opencontainers.image.source=https://github.com/netbirdio/{{.ProjectName}}"
-      - "--label=maintainer=dev@netbird.io"
-  - image_templates:
-      - netbirdio/netbird:{{ .Version }}-rootless-arm64v8
-      - ghcr.io/netbirdio/netbird:{{ .Version }}-rootless-arm64v8
-    ids:
-      - netbird
-    goarch: arm64
-    use: buildx
-    dockerfile: client/Dockerfile-rootless
-    extra_files:
-      - client/netbird-entrypoint.sh
-    build_flag_templates:
-      - "--platform=linux/arm64"
-      - "--label=org.opencontainers.image.created={{.Date}}"
-      - "--label=org.opencontainers.image.title={{.ProjectName}}"
-      - "--label=org.opencontainers.image.version={{.Version}}"
-      - "--label=org.opencontainers.image.revision={{.FullCommit}}"
-      - "--label=org.opencontainers.image.source=https://github.com/netbirdio/{{.ProjectName}}"
-      - "--label=maintainer=dev@netbird.io"
-  - image_templates:
-      - netbirdio/netbird:{{ .Version }}-rootless-arm
-      - ghcr.io/netbirdio/netbird:{{ .Version }}-rootless-arm
-    ids:
-      - netbird
-    goarch: arm
-    goarm: 6
-    use: buildx
-    dockerfile: client/Dockerfile-rootless
-    extra_files:
-      - client/netbird-entrypoint.sh
-    build_flag_templates:
-      - "--platform=linux/arm"
-      - "--label=org.opencontainers.image.created={{.Date}}"
-      - "--label=org.opencontainers.image.title={{.ProjectName}}"
-      - "--label=org.opencontainers.image.version={{.Version}}"
-      - "--label=org.opencontainers.image.revision={{.FullCommit}}"
-      - "--label=org.opencontainers.image.source=https://github.com/netbirdio/{{.ProjectName}}"
-      - "--label=maintainer=dev@netbird.io"
-
-  - image_templates:
-      - netbirdio/relay:{{ .Version }}-amd64
-      - ghcr.io/netbirdio/relay:{{ .Version }}-amd64
-    ids:
-      - netbird-relay
-    goarch: amd64
-    use: buildx
-    dockerfile: relay/Dockerfile
-    build_flag_templates:
-      - "--platform=linux/amd64"
-      - "--label=org.opencontainers.image.created={{.Date}}"
-      - "--label=org.opencontainers.image.title={{.ProjectName}}"
-      - "--label=org.opencontainers.image.version={{.Version}}"
-      - "--label=org.opencontainers.image.revision={{.FullCommit}}"
-      - "--label=org.opencontainers.image.source=https://github.com/netbirdio/{{.ProjectName}}"
-      - "--label=maintainer=dev@netbird.io"
-  - image_templates:
-      - netbirdio/relay:{{ .Version }}-arm64v8
-      - ghcr.io/netbirdio/relay:{{ .Version }}-arm64v8
-    ids:
-      - netbird-relay
-    goarch: arm64
-    use: buildx
-    dockerfile: relay/Dockerfile
-    build_flag_templates:
-      - "--platform=linux/arm64"
-      - "--label=org.opencontainers.image.created={{.Date}}"
-      - "--label=org.opencontainers.image.title={{.ProjectName}}"
-      - "--label=org.opencontainers.image.version={{.Version}}"
-      - "--label=org.opencontainers.image.revision={{.FullCommit}}"
-      - "--label=org.opencontainers.image.source=https://github.com/netbirdio/{{.ProjectName}}"
-      - "--label=maintainer=dev@netbird.io"
-  - image_templates:
-      - netbirdio/relay:{{ .Version }}-arm
-      - ghcr.io/netbirdio/relay:{{ .Version }}-arm
-    ids:
-      - netbird-relay
-    goarch: arm
-    goarm: 6
-    use: buildx
-    dockerfile: relay/Dockerfile
-    build_flag_templates:
-      - "--platform=linux/arm"
-      - "--label=org.opencontainers.image.created={{.Date}}"
-      - "--label=org.opencontainers.image.title={{.ProjectName}}"
-      - "--label=org.opencontainers.image.version={{.Version}}"
-      - "--label=org.opencontainers.image.revision={{.FullCommit}}"
-      - "--label=org.opencontainers.image.source=https://github.com/netbirdio/{{.ProjectName}}"
-      - "--label=maintainer=dev@netbird.io"
-  - image_templates:
-      - netbirdio/signal:{{ .Version }}-amd64
-      - ghcr.io/netbirdio/signal:{{ .Version }}-amd64
-    ids:
-      - netbird-signal
-    goarch: amd64
-    use: buildx
-    dockerfile: signal/Dockerfile
-    build_flag_templates:
-      - "--platform=linux/amd64"
-      - "--label=org.opencontainers.image.created={{.Date}}"
-      - "--label=org.opencontainers.image.title={{.ProjectName}}"
-      - "--label=org.opencontainers.image.version={{.Version}}"
-      - "--label=org.opencontainers.image.revision={{.FullCommit}}"
-      - "--label=org.opencontainers.image.source=https://github.com/netbirdio/{{.ProjectName}}"
-      - "--label=maintainer=dev@netbird.io"
-  - image_templates:
-      - netbirdio/signal:{{ .Version }}-arm64v8
-      - ghcr.io/netbirdio/signal:{{ .Version }}-arm64v8
-    ids:
-      - netbird-signal
-    goarch: arm64
-    use: buildx
-    dockerfile: signal/Dockerfile
-    build_flag_templates:
-      - "--platform=linux/arm64"
-      - "--label=org.opencontainers.image.created={{.Date}}"
-      - "--label=org.opencontainers.image.title={{.ProjectName}}"
-      - "--label=org.opencontainers.image.version={{.Version}}"
-      - "--label=org.opencontainers.image.revision={{.FullCommit}}"
-      - "--label=org.opencontainers.image.source=https://github.com/netbirdio/{{.ProjectName}}"
-      - "--label=maintainer=dev@netbird.io"
-  - image_templates:
-      - netbirdio/signal:{{ .Version }}-arm
-      - ghcr.io/netbirdio/signal:{{ .Version }}-arm
-    ids:
-      - netbird-signal
-    goarch: arm
-    goarm: 6
-    use: buildx
-    dockerfile: signal/Dockerfile
-    build_flag_templates:
-      - "--platform=linux/arm"
-      - "--label=org.opencontainers.image.created={{.Date}}"
-      - "--label=org.opencontainers.image.title={{.ProjectName}}"
-      - "--label=org.opencontainers.image.version={{.Version}}"
-      - "--label=org.opencontainers.image.revision={{.FullCommit}}"
-      - "--label=org.opencontainers.image.source=https://github.com/netbirdio/{{.ProjectName}}"
-      - "--label=maintainer=dev@netbird.io"
-  - image_templates:
-      - netbirdio/management:{{ .Version }}-amd64
-      - ghcr.io/netbirdio/management:{{ .Version }}-amd64
-    ids:
-      - netbird-mgmt
-    goarch: amd64
-    use: buildx
-    dockerfile: management/Dockerfile
-    build_flag_templates:
-      - "--platform=linux/amd64"
-      - "--label=org.opencontainers.image.created={{.Date}}"
-      - "--label=org.opencontainers.image.title={{.ProjectName}}"
-      - "--label=org.opencontainers.image.version={{.Version}}"
-      - "--label=org.opencontainers.image.revision={{.FullCommit}}"
-      - "--label=org.opencontainers.image.source=https://github.com/netbirdio/{{.ProjectName}}"
-      - "--label=maintainer=dev@netbird.io"
-  - image_templates:
-      - netbirdio/management:{{ .Version }}-arm64v8
-      - ghcr.io/netbirdio/management:{{ .Version }}-arm64v8
-    ids:
-      - netbird-mgmt
-    goarch: arm64
-    use: buildx
-    dockerfile: management/Dockerfile
-    build_flag_templates:
-      - "--platform=linux/arm64"
-      - "--label=org.opencontainers.image.created={{.Date}}"
-      - "--label=org.opencontainers.image.title={{.ProjectName}}"
-      - "--label=org.opencontainers.image.version={{.Version}}"
-      - "--label=org.opencontainers.image.revision={{.FullCommit}}"
-      - "--label=org.opencontainers.image.source=https://github.com/netbirdio/{{.ProjectName}}"
-      - "--label=maintainer=dev@netbird.io"
-  - image_templates:
-      - netbirdio/management:{{ .Version }}-arm
-      - ghcr.io/netbirdio/management:{{ .Version }}-arm
-    ids:
-      - netbird-mgmt
-    goarch: arm
-    goarm: 6
-    use: buildx
-    dockerfile: management/Dockerfile
-    build_flag_templates:
-      - "--platform=linux/arm"
-      - "--label=org.opencontainers.image.created={{.Date}}"
-      - "--label=org.opencontainers.image.title={{.ProjectName}}"
-      - "--label=org.opencontainers.image.version={{.Version}}"
-      - "--label=org.opencontainers.image.revision={{.FullCommit}}"
-      - "--label=org.opencontainers.image.source=https://github.com/netbirdio/{{.ProjectName}}"
-      - "--label=maintainer=dev@netbird.io"
-  - image_templates:
-      - netbirdio/management:{{ .Version }}-debug-amd64
-      - ghcr.io/netbirdio/management:{{ .Version }}-debug-amd64
-    ids:
-      - netbird-mgmt
-    goarch: amd64
-    use: buildx
-    dockerfile: management/Dockerfile.debug
-    build_flag_templates:
-      - "--platform=linux/amd64"
-      - "--label=org.opencontainers.image.created={{.Date}}"
-      - "--label=org.opencontainers.image.title={{.ProjectName}}"
-      - "--label=org.opencontainers.image.version={{.Version}}"
-      - "--label=org.opencontainers.image.revision={{.FullCommit}}"
-      - "--label=org.opencontainers.image.source=https://github.com/netbirdio/{{.ProjectName}}"
-      - "--label=maintainer=dev@netbird.io"
-  - image_templates:
-      - netbirdio/management:{{ .Version }}-debug-arm64v8
-      - ghcr.io/netbirdio/management:{{ .Version }}-debug-arm64v8
-    ids:
-      - netbird-mgmt
-    goarch: arm64
-    use: buildx
-    dockerfile: management/Dockerfile.debug
-    build_flag_templates:
-      - "--platform=linux/arm64"
-      - "--label=org.opencontainers.image.created={{.Date}}"
-      - "--label=org.opencontainers.image.title={{.ProjectName}}"
-      - "--label=org.opencontainers.image.version={{.Version}}"
-      - "--label=org.opencontainers.image.revision={{.FullCommit}}"
-      - "--label=org.opencontainers.image.source=https://github.com/netbirdio/{{.ProjectName}}"
-      - "--label=maintainer=dev@netbird.io"
-
-  - image_templates:
-      - netbirdio/management:{{ .Version }}-debug-arm
-      - ghcr.io/netbirdio/management:{{ .Version }}-debug-arm
-    ids:
-      - netbird-mgmt
-    goarch: arm
-    goarm: 6
-    use: buildx
-    dockerfile: management/Dockerfile.debug
-    build_flag_templates:
-      - "--platform=linux/arm"
-      - "--label=org.opencontainers.image.created={{.Date}}"
-      - "--label=org.opencontainers.image.title={{.ProjectName}}"
-      - "--label=org.opencontainers.image.version={{.Version}}"
-      - "--label=org.opencontainers.image.revision={{.FullCommit}}"
-      - "--label=org.opencontainers.image.source=https://github.com/netbirdio/{{.ProjectName}}"
-      - "--label=maintainer=dev@netbird.io"
-  - image_templates:
-      - netbirdio/upload:{{ .Version }}-amd64
-      - ghcr.io/netbirdio/upload:{{ .Version }}-amd64
-    ids:
-      - netbird-upload
-    goarch: amd64
-    use: buildx
-    dockerfile: upload-server/Dockerfile
-    build_flag_templates:
-      - "--platform=linux/amd64"
-      - "--label=org.opencontainers.image.created={{.Date}}"
-      - "--label=org.opencontainers.image.title={{.ProjectName}}"
-      - "--label=org.opencontainers.image.version={{.Version}}"
-      - "--label=org.opencontainers.image.revision={{.FullCommit}}"
-      - "--label=org.opencontainers.image.source=https://github.com/netbirdio/{{.ProjectName}}"
-      - "--label=maintainer=dev@netbird.io"
-  - image_templates:
-      - netbirdio/upload:{{ .Version }}-arm64v8
-      - ghcr.io/netbirdio/upload:{{ .Version }}-arm64v8
-    ids:
-      - netbird-upload
-    goarch: arm64
-    use: buildx
-    dockerfile: upload-server/Dockerfile
-    build_flag_templates:
-      - "--platform=linux/arm64"
-      - "--label=org.opencontainers.image.created={{.Date}}"
-      - "--label=org.opencontainers.image.title={{.ProjectName}}"
-      - "--label=org.opencontainers.image.version={{.Version}}"
-      - "--label=org.opencontainers.image.revision={{.FullCommit}}"
-      - "--label=org.opencontainers.image.source=https://github.com/netbirdio/{{.ProjectName}}"
-      - "--label=maintainer=dev@netbird.io"
-  - image_templates:
-      - netbirdio/upload:{{ .Version }}-arm
-      - ghcr.io/netbirdio/upload:{{ .Version }}-arm
-    ids:
-      - netbird-upload
-    goarch: arm
-    goarm: 6
-    use: buildx
-    dockerfile: upload-server/Dockerfile
-    build_flag_templates:
-      - "--platform=linux/arm"
-      - "--label=org.opencontainers.image.created={{.Date}}"
-      - "--label=org.opencontainers.image.title={{.ProjectName}}"
-      - "--label=org.opencontainers.image.version={{.Version}}"
-      - "--label=org.opencontainers.image.revision={{.FullCommit}}"
-      - "--label=org.opencontainers.image.source=https://github.com/netbirdio/{{.ProjectName}}"
-      - "--label=maintainer=dev@netbird.io"
-  - image_templates:
-      - netbirdio/netbird-server:{{ .Version }}-amd64
-      - ghcr.io/netbirdio/netbird-server:{{ .Version }}-amd64
-    ids:
-      - netbird-server
-    goarch: amd64
-    use: buildx
-    dockerfile: combined/Dockerfile
-    build_flag_templates:
-      - "--platform=linux/amd64"
-      - "--label=org.opencontainers.image.created={{.Date}}"
-      - "--label=org.opencontainers.image.title={{.ProjectName}}"
-      - "--label=org.opencontainers.image.version={{.Version}}"
-      - "--label=org.opencontainers.image.revision={{.FullCommit}}"
-      - "--label=org.opencontainers.image.source=https://github.com/netbirdio/{{.ProjectName}}"
-      - "--label=maintainer=dev@netbird.io"
-  - image_templates:
-      - netbirdio/netbird-server:{{ .Version }}-arm64v8
-      - ghcr.io/netbirdio/netbird-server:{{ .Version }}-arm64v8
-    ids:
-      - netbird-server
-    goarch: arm64
-    use: buildx
-    dockerfile: combined/Dockerfile
-    build_flag_templates:
-      - "--platform=linux/arm64"
-      - "--label=org.opencontainers.image.created={{.Date}}"
-      - "--label=org.opencontainers.image.title={{.ProjectName}}"
-      - "--label=org.opencontainers.image.version={{.Version}}"
-      - "--label=org.opencontainers.image.revision={{.FullCommit}}"
-      - "--label=org.opencontainers.image.source=https://github.com/netbirdio/{{.ProjectName}}"
-      - "--label=maintainer=dev@netbird.io"
-  - image_templates:
-      - netbirdio/netbird-server:{{ .Version }}-arm
-      - ghcr.io/netbirdio/netbird-server:{{ .Version }}-arm
-    ids:
-      - netbird-server
-    goarch: arm
-    goarm: 6
-    use: buildx
-    dockerfile: combined/Dockerfile
-    build_flag_templates:
-      - "--platform=linux/arm"
-      - "--label=org.opencontainers.image.created={{.Date}}"
-      - "--label=org.opencontainers.image.title={{.ProjectName}}"
-      - "--label=org.opencontainers.image.version={{.Version}}"
-      - "--label=org.opencontainers.image.revision={{.FullCommit}}"
-      - "--label=org.opencontainers.image.source=https://github.com/netbirdio/{{.ProjectName}}"
-      - "--label=maintainer=dev@netbird.io"
-  - image_templates:
-      - netbirdio/reverse-proxy:{{ .Version }}-amd64
-      - ghcr.io/netbirdio/reverse-proxy:{{ .Version }}-amd64
-    ids:
-      - netbird-proxy
-    goarch: amd64
-    use: buildx
-    dockerfile: proxy/Dockerfile
-    build_flag_templates:
-      - "--platform=linux/amd64"
-      - "--label=org.opencontainers.image.created={{.Date}}"
-      - "--label=org.opencontainers.image.title={{.ProjectName}}"
-      - "--label=org.opencontainers.image.version={{.Version}}"
-      - "--label=org.opencontainers.image.revision={{.FullCommit}}"
-      - "--label=org.opencontainers.image.source=https://github.com/netbirdio/{{.ProjectName}}"
-      - "--label=maintainer=dev@netbird.io"
-  - image_templates:
-      - netbirdio/reverse-proxy:{{ .Version }}-arm64v8
-      - ghcr.io/netbirdio/reverse-proxy:{{ .Version }}-arm64v8
-    ids:
-      - netbird-proxy
-    goarch: arm64
-    use: buildx
-    dockerfile: proxy/Dockerfile
-    build_flag_templates:
-      - "--platform=linux/arm64"
-      - "--label=org.opencontainers.image.created={{.Date}}"
-      - "--label=org.opencontainers.image.title={{.ProjectName}}"
-      - "--label=org.opencontainers.image.version={{.Version}}"
-      - "--label=org.opencontainers.image.revision={{.FullCommit}}"
-      - "--label=org.opencontainers.image.source=https://github.com/netbirdio/{{.ProjectName}}"
-      - "--label=maintainer=dev@netbird.io"
-  - image_templates:
-      - netbirdio/reverse-proxy:{{ .Version }}-arm
-      - ghcr.io/netbirdio/reverse-proxy:{{ .Version }}-arm
-    ids:
-      - netbird-proxy
-    goarch: arm
-    goarm: 6
-    use: buildx
-    dockerfile: proxy/Dockerfile
-    build_flag_templates:
-      - "--platform=linux/arm"
-      - "--label=org.opencontainers.image.created={{.Date}}"
-      - "--label=org.opencontainers.image.title={{.ProjectName}}"
-      - "--label=org.opencontainers.image.version={{.Version}}"
-      - "--label=org.opencontainers.image.revision={{.FullCommit}}"
-      - "--label=org.opencontainers.image.source=https://github.com/netbirdio/{{.ProjectName}}"
-      - "--label=maintainer=dev@netbird.io"
-docker_manifests:
-  - name_template: netbirdio/netbird:{{ .Version }}
-    image_templates:
-      - netbirdio/netbird:{{ .Version }}-arm64v8
-      - netbirdio/netbird:{{ .Version }}-arm
-      - netbirdio/netbird:{{ .Version }}-amd64
-
-  - name_template: netbirdio/netbird:latest
-    image_templates:
-      - netbirdio/netbird:{{ .Version }}-arm64v8
-      - netbirdio/netbird:{{ .Version }}-arm
-      - netbirdio/netbird:{{ .Version }}-amd64
-
-  - name_template: netbirdio/netbird:{{ .Version }}-rootless
-    image_templates:
-      - netbirdio/netbird:{{ .Version }}-rootless-arm64v8
-      - netbirdio/netbird:{{ .Version }}-rootless-arm
-      - netbirdio/netbird:{{ .Version }}-rootless-amd64
-
-  - name_template: netbirdio/netbird:rootless-latest
-    image_templates:
-      - netbirdio/netbird:{{ .Version }}-rootless-arm64v8
-      - netbirdio/netbird:{{ .Version }}-rootless-arm
-      - netbirdio/netbird:{{ .Version }}-rootless-amd64
-
-  - name_template: netbirdio/relay:{{ .Version }}
-    image_templates:
-      - netbirdio/relay:{{ .Version }}-arm64v8
-      - netbirdio/relay:{{ .Version }}-arm
-      - netbirdio/relay:{{ .Version }}-amd64
-
-  - name_template: netbirdio/relay:latest
-    image_templates:
-      - netbirdio/relay:{{ .Version }}-arm64v8
-      - netbirdio/relay:{{ .Version }}-arm
-      - netbirdio/relay:{{ .Version }}-amd64
-
-  - name_template: netbirdio/signal:{{ .Version }}
-    image_templates:
-      - netbirdio/signal:{{ .Version }}-arm64v8
-      - netbirdio/signal:{{ .Version }}-arm
-      - netbirdio/signal:{{ .Version }}-amd64
-
-  - name_template: netbirdio/signal:latest
-    image_templates:
-      - netbirdio/signal:{{ .Version }}-arm64v8
-      - netbirdio/signal:{{ .Version }}-arm
-      - netbirdio/signal:{{ .Version }}-amd64
-
-  - name_template: netbirdio/management:{{ .Version }}
-    image_templates:
-      - netbirdio/management:{{ .Version }}-arm64v8
-      - netbirdio/management:{{ .Version }}-arm
-      - netbirdio/management:{{ .Version }}-amd64
-
-  - name_template: netbirdio/management:latest
-    image_templates:
-      - netbirdio/management:{{ .Version }}-arm64v8
-      - netbirdio/management:{{ .Version }}-arm
-      - netbirdio/management:{{ .Version }}-amd64
-
-  - name_template: netbirdio/management:debug-latest
-    image_templates:
-      - netbirdio/management:{{ .Version }}-debug-arm64v8
-      - netbirdio/management:{{ .Version }}-debug-arm
-      - netbirdio/management:{{ .Version }}-debug-amd64
-  - name_template: netbirdio/upload:{{ .Version }}
-    image_templates:
-      - netbirdio/upload:{{ .Version }}-arm64v8
-      - netbirdio/upload:{{ .Version }}-arm
-      - netbirdio/upload:{{ .Version }}-amd64
-
-  - name_template: netbirdio/upload:latest
-    image_templates:
-      - netbirdio/upload:{{ .Version }}-arm64v8
-      - netbirdio/upload:{{ .Version }}-arm
-      - netbirdio/upload:{{ .Version }}-amd64
-
-  - name_template: netbirdio/netbird-server:{{ .Version }}
-    image_templates:
-      - netbirdio/netbird-server:{{ .Version }}-arm64v8
-      - netbirdio/netbird-server:{{ .Version }}-arm
-      - netbirdio/netbird-server:{{ .Version }}-amd64
-
-  - name_template: netbirdio/netbird-server:latest
-    image_templates:
-      - netbirdio/netbird-server:{{ .Version }}-arm64v8
-      - netbirdio/netbird-server:{{ .Version }}-arm
-      - netbirdio/netbird-server:{{ .Version }}-amd64
-
-  - name_template: ghcr.io/netbirdio/netbird:{{ .Version }}
-    image_templates:
-      - ghcr.io/netbirdio/netbird:{{ .Version }}-arm64v8
-      - ghcr.io/netbirdio/netbird:{{ .Version }}-arm
-      - ghcr.io/netbirdio/netbird:{{ .Version }}-amd64
-
-  - name_template: ghcr.io/netbirdio/netbird:latest
-    image_templates:
-      - ghcr.io/netbirdio/netbird:{{ .Version }}-arm64v8
-      - ghcr.io/netbirdio/netbird:{{ .Version }}-arm
-      - ghcr.io/netbirdio/netbird:{{ .Version }}-amd64
-
-  - name_template: ghcr.io/netbirdio/netbird:{{ .Version }}-rootless
-    image_templates:
-      - ghcr.io/netbirdio/netbird:{{ .Version }}-rootless-arm64v8
-      - ghcr.io/netbirdio/netbird:{{ .Version }}-rootless-arm
-      - ghcr.io/netbirdio/netbird:{{ .Version }}-rootless-amd64
-
-  - name_template: ghcr.io/netbirdio/netbird:rootless-latest
-    image_templates:
-      - ghcr.io/netbirdio/netbird:{{ .Version }}-rootless-arm64v8
-      - ghcr.io/netbirdio/netbird:{{ .Version }}-rootless-arm
-      - ghcr.io/netbirdio/netbird:{{ .Version }}-rootless-amd64
-
-  - name_template: ghcr.io/netbirdio/relay:{{ .Version }}
-    image_templates:
-      - ghcr.io/netbirdio/relay:{{ .Version }}-arm64v8
-      - ghcr.io/netbirdio/relay:{{ .Version }}-arm
-      - ghcr.io/netbirdio/relay:{{ .Version }}-amd64
-
-  - name_template: ghcr.io/netbirdio/relay:latest
-    image_templates:
-      - ghcr.io/netbirdio/relay:{{ .Version }}-arm64v8
-      - ghcr.io/netbirdio/relay:{{ .Version }}-arm
-      - ghcr.io/netbirdio/relay:{{ .Version }}-amd64
-
-  - name_template: ghcr.io/netbirdio/signal:{{ .Version }}
-    image_templates:
-      - ghcr.io/netbirdio/signal:{{ .Version }}-arm64v8
-      - ghcr.io/netbirdio/signal:{{ .Version }}-arm
-      - ghcr.io/netbirdio/signal:{{ .Version }}-amd64
-
-  - name_template: ghcr.io/netbirdio/signal:latest
-    image_templates:
-      - ghcr.io/netbirdio/signal:{{ .Version }}-arm64v8
-      - ghcr.io/netbirdio/signal:{{ .Version }}-arm
-      - ghcr.io/netbirdio/signal:{{ .Version }}-amd64
-
-  - name_template: ghcr.io/netbirdio/management:{{ .Version }}
-    image_templates:
-      - ghcr.io/netbirdio/management:{{ .Version }}-arm64v8
-      - ghcr.io/netbirdio/management:{{ .Version }}-arm
-      - ghcr.io/netbirdio/management:{{ .Version }}-amd64
-
-  - name_template: ghcr.io/netbirdio/management:latest
-    image_templates:
-      - ghcr.io/netbirdio/management:{{ .Version }}-arm64v8
-      - ghcr.io/netbirdio/management:{{ .Version }}-arm
-      - ghcr.io/netbirdio/management:{{ .Version }}-amd64
-
-  - name_template: ghcr.io/netbirdio/management:debug-latest
-    image_templates:
-      - ghcr.io/netbirdio/management:{{ .Version }}-debug-arm64v8
-      - ghcr.io/netbirdio/management:{{ .Version }}-debug-arm
-      - ghcr.io/netbirdio/management:{{ .Version }}-debug-amd64
-
-  - name_template: ghcr.io/netbirdio/upload:{{ .Version }}
-    image_templates:
-      - ghcr.io/netbirdio/upload:{{ .Version }}-arm64v8
-      - ghcr.io/netbirdio/upload:{{ .Version }}-arm
-      - ghcr.io/netbirdio/upload:{{ .Version }}-amd64
-
-  - name_template: ghcr.io/netbirdio/upload:latest
-    image_templates:
-      - ghcr.io/netbirdio/upload:{{ .Version }}-arm64v8
-      - ghcr.io/netbirdio/upload:{{ .Version }}-arm
-      - ghcr.io/netbirdio/upload:{{ .Version }}-amd64
-
-  - name_template: ghcr.io/netbirdio/netbird-server:{{ .Version }}
-    image_templates:
-      - ghcr.io/netbirdio/netbird-server:{{ .Version }}-arm64v8
-      - ghcr.io/netbirdio/netbird-server:{{ .Version }}-arm
-      - ghcr.io/netbirdio/netbird-server:{{ .Version }}-amd64
-
-  - name_template: ghcr.io/netbirdio/netbird-server:latest
-    image_templates:
-      - ghcr.io/netbirdio/netbird-server:{{ .Version }}-arm64v8
-      - ghcr.io/netbirdio/netbird-server:{{ .Version }}-arm
-      - ghcr.io/netbirdio/netbird-server:{{ .Version }}-amd64
-
-  - name_template: netbirdio/reverse-proxy:{{ .Version }}
-    image_templates:
-      - netbirdio/reverse-proxy:{{ .Version }}-arm64v8
-      - netbirdio/reverse-proxy:{{ .Version }}-arm
-      - netbirdio/reverse-proxy:{{ .Version }}-amd64
-
-  - name_template: netbirdio/reverse-proxy:latest
-    image_templates:
-      - netbirdio/reverse-proxy:{{ .Version }}-arm64v8
-      - netbirdio/reverse-proxy:{{ .Version }}-arm
-      - netbirdio/reverse-proxy:{{ .Version }}-amd64
-
-  - name_template: ghcr.io/netbirdio/reverse-proxy:{{ .Version }}
-    image_templates:
-      - ghcr.io/netbirdio/reverse-proxy:{{ .Version }}-arm64v8
-      - ghcr.io/netbirdio/reverse-proxy:{{ .Version }}-arm
-      - ghcr.io/netbirdio/reverse-proxy:{{ .Version }}-amd64
-
-  - name_template: ghcr.io/netbirdio/reverse-proxy:latest
-    image_templates:
-      - ghcr.io/netbirdio/reverse-proxy:{{ .Version }}-arm64v8
-      - ghcr.io/netbirdio/reverse-proxy:{{ .Version }}-arm
-      - ghcr.io/netbirdio/reverse-proxy:{{ .Version }}-amd64
+dockers_v2:
+   - id: netbird
+     disable: "{{ .Env.SKIP_DOCKER_PUSH }}"
+     ids:
+       - netbird
+     images:
+       - netbirdio/netbird
+       - ghcr.io/netbirdio/netbird
+     tags:
+       - "v{{ .Version }}"
+       - "{{ if eq .Env.SKIP_PUBLISH \"false\" }}latest{{ end }}"
+     dockerfile: client/Dockerfile
+     extra_files:
+       - client/netbird-entrypoint.sh
+     platforms:
+       - linux/amd64
+       - linux/arm64
+       - linux/arm/6
+     annotations:
+       "org.opencontainers.image.created": "{{.Date}}"
+       "org.opencontainers.image.title": "{{.ProjectName}}"
+       "org.opencontainers.image.version": "{{.Version}}"
+       "org.opencontainers.image.revision": "{{.FullCommit}}"
+       "org.opencontainers.image.source": "{{.GitURL}}"
+       "maintainer": "dev@netbird.io"
+   - id: netbird-rootless
+     disable: "{{ .Env.SKIP_DOCKER_PUSH }}"
+     ids:
+       - netbird
+     images:
+       - netbirdio/netbird
+       - ghcr.io/netbirdio/netbird
+     tags:
+       - "v{{ .Version }}-rootless"
+       - "{{ if eq .Env.SKIP_PUBLISH \"false\" }}latest{{ end }}"
+     dockerfile: client/Dockerfile-rootless
+     extra_files:
+       - client/netbird-entrypoint.sh
+     platforms:
+       - linux/amd64
+       - linux/arm64
+       - linux/arm/6
+     annotations:
+       "org.opencontainers.image.created": "{{.Date}}"
+       "org.opencontainers.image.title": "{{.ProjectName}}"
+       "org.opencontainers.image.version": "{{.Version}}"
+       "org.opencontainers.image.revision": "{{.FullCommit}}"
+       "org.opencontainers.image.source": "{{.GitURL}}"
+       "maintainer": "dev@netbird.io"
+   - id: relay
+     disable: "{{ .Env.SKIP_DOCKER_PUSH }}"
+     ids:
+       - netbird-relay
+     images:
+       - netbirdio/relay
+       - ghcr.io/netbirdio/relay
+     tags:
+       - "v{{ .Version }}"
+       - "{{ if eq .Env.SKIP_PUBLISH \"false\" }}latest{{ end }}"
+     dockerfile: relay/Dockerfile
+     platforms:
+       - linux/amd64
+       - linux/arm64
+       - linux/arm
+     annotations:
+       "org.opencontainers.image.created": "{{.Date}}"
+       "org.opencontainers.image.title": "{{.ProjectName}}"
+       "org.opencontainers.image.version": "{{.Version}}"
+       "org.opencontainers.image.revision": "{{.FullCommit}}"
+       "org.opencontainers.image.source": "{{.GitURL}}"
+       "maintainer": "dev@netbird.io"
+   - id: signal
+     disable: "{{ .Env.SKIP_DOCKER_PUSH }}"
+     ids:
+       - netbird-signal
+     images:
+       - netbirdio/signal
+       - ghcr.io/netbirdio/signal
+     tags:
+       - "v{{ .Version }}"
+       - "{{ if eq .Env.SKIP_PUBLISH \"false\" }}latest{{ end }}"
+     dockerfile: signal/Dockerfile
+     platforms:
+       - linux/amd64
+       - linux/arm64
+       - linux/arm
+     annotations:
+       "org.opencontainers.image.created": "{{.Date}}"
+       "org.opencontainers.image.title": "{{.ProjectName}}"
+       "org.opencontainers.image.version": "{{.Version}}"
+       "org.opencontainers.image.revision": "{{.FullCommit}}"
+       "org.opencontainers.image.source": "{{.GitURL}}"
+       "maintainer": "dev@netbird.io"
+   - id: management
+     disable: "{{ .Env.SKIP_DOCKER_PUSH }}"
+     ids:
+       - netbird-mgmt
+     images:
+       - netbirdio/management
+       - ghcr.io/netbirdio/management
+     tags:
+       - "v{{ .Version }}"
+       - "{{ if eq .Env.SKIP_PUBLISH \"false\" }}latest{{ end }}"
+     dockerfile: management/Dockerfile
+     platforms:
+       - linux/amd64
+       - linux/arm64
+       - linux/arm
+     annotations:
+       "org.opencontainers.image.created": "{{.Date}}"
+       "org.opencontainers.image.title": "{{.ProjectName}}"
+       "org.opencontainers.image.version": "{{.Version}}"
+       "org.opencontainers.image.revision": "{{.FullCommit}}"
+       "org.opencontainers.image.source": "{{.GitURL}}"
+       "maintainer": "dev@netbird.io"
+   - id: upload
+     disable: "{{ .Env.SKIP_DOCKER_PUSH }}"
+     ids:
+       - netbird-upload
+     images:
+       - netbirdio/upload
+       - ghcr.io/netbirdio/upload
+     tags:
+       - "v{{ .Version }}"
+       - "{{ if eq .Env.SKIP_PUBLISH \"false\" }}latest{{ end }}"
+     dockerfile: upload-server/Dockerfile
+     platforms:
+       - linux/amd64
+       - linux/arm64
+       - linux/arm
+     annotations:
+       "org.opencontainers.image.created": "{{.Date}}"
+       "org.opencontainers.image.title": "{{.ProjectName}}"
+       "org.opencontainers.image.version": "{{.Version}}"
+       "org.opencontainers.image.revision": "{{.FullCommit}}"
+       "org.opencontainers.image.source": "{{.GitURL}}"
+       "maintainer": "dev@netbird.io"
+   - id: netbird-server
+     disable: "{{ .Env.SKIP_DOCKER_PUSH }}"
+     ids:
+       - netbird-server
+     images:
+       - netbirdio/netbird-server
+       - ghcr.io/netbirdio/netbird-server
+     tags:
+       - "v{{ .Version }}"
+       - "{{ if eq .Env.SKIP_PUBLISH \"false\" }}latest{{ end }}"
+     dockerfile: combined/Dockerfile
+     platforms:
+       - linux/amd64
+       - linux/arm64
+       - linux/arm
+     annotations:
+       "org.opencontainers.image.created": "{{.Date}}"
+       "org.opencontainers.image.title": "{{.ProjectName}}"
+       "org.opencontainers.image.version": "{{.Version}}"
+       "org.opencontainers.image.revision": "{{.FullCommit}}"
+       "org.opencontainers.image.source": "{{.GitURL}}"
+       "maintainer": "dev@netbird.io"
+   - id: netbird-proxy
+     disable: "{{ .Env.SKIP_DOCKER_PUSH }}"
+     ids:
+       - netbird-proxy
+     images:
+       - netbirdio/reverse-proxy
+       - ghcr.io/netbirdio/reverse-proxy
+     tags:
+       - "v{{ .Version }}"
+       - "{{ if eq .Env.SKIP_PUBLISH \"false\" }}latest{{ end }}"
+     dockerfile: proxy/Dockerfile
+     platforms:
+       - linux/amd64
+       - linux/arm64
+       - linux/arm
+     annotations:
+       "org.opencontainers.image.created": "{{.Date}}"
+       "org.opencontainers.image.title": "{{.ProjectName}}"
+       "org.opencontainers.image.version": "{{.Version}}"
+       "org.opencontainers.image.revision": "{{.FullCommit}}"
+       "org.opencontainers.image.source": "{{.GitURL}}"
+       "maintainer": "dev@netbird.io"
 
 brews:
   - ids:
       - default
+    skip_upload: "{{ .Env.SKIP_PUBLISH }}"
     repository:
       owner: netbirdio
       name: homebrew-tap
@@ -902,6 +440,7 @@ brews:
 
 uploads:
   - name: debian
+    skip: "{{ .Env.SKIP_PUBLISH }}"
     ids:
       - netbird_deb
     mode: archive
@@ -910,6 +449,7 @@ uploads:
     method: PUT
 
   - name: yum
+    skip: "{{ .Env.SKIP_PUBLISH }}"
     ids:
       - netbird_rpm
     mode: archive

.goreleaser_ui.yaml

@@ -1,5 +1,6 @@
 version: 2
-
+env:
+  - SKIP_PUBLISH={{ if index .Env "SKIP_PUBLISH" }}{{ .Env.SKIP_PUBLISH }}{{ else }}true{{ end }}
 project_name: netbird-ui
 builds:
   - id: netbird-ui
@@ -101,6 +102,7 @@ nfpms:
 
 uploads:
   - name: debian
+    skip: "{{ .Env.SKIP_PUBLISH }}"
     ids:
       - netbird_ui_deb
     mode: archive
@@ -109,6 +111,7 @@ uploads:
     method: PUT
 
   - name: yum
+    skip: "{{ .Env.SKIP_PUBLISH }}"
     ids:
       - netbird_ui_rpm
     mode: archive

client/Dockerfile

@@ -4,7 +4,7 @@
 #   sudo podman build -t localhost/netbird:latest -f client/Dockerfile --ignorefile .dockerignore-client .
 #   sudo podman run --rm -it --cap-add={BPF,NET_ADMIN,NET_RAW} localhost/netbird:latest
 
-FROM alpine:3.23.3
+FROM alpine:3.24
 # iproute2: busybox doesn't display ip rules properly
 RUN apk add --no-cache \
     bash \
@@ -21,7 +21,7 @@ ENV \
     NB_ENTRYPOINT_SERVICE_TIMEOUT="30"
 
 ENTRYPOINT [ "/usr/local/bin/netbird-entrypoint.sh" ]
-
-ARG NETBIRD_BINARY=netbird
+ARG TARGETPLATFORM
+ARG NETBIRD_BINARY=$TARGETPLATFORM/netbird
 COPY client/netbird-entrypoint.sh /usr/local/bin/netbird-entrypoint.sh
 COPY "${NETBIRD_BINARY}"  /usr/local/bin/netbird

client/Dockerfile-rootless

@@ -4,7 +4,7 @@
 #   podman build -t localhost/netbird:latest -f client/Dockerfile --ignorefile .dockerignore-client .
 #   podman run --rm -it --cap-add={BPF,NET_ADMIN,NET_RAW} localhost/netbird:latest
 
-FROM alpine:3.22.0
+FROM alpine:3.24
 
 RUN apk add --no-cache \
       bash \
@@ -27,7 +27,7 @@ ENV \
     NB_ENTRYPOINT_SERVICE_TIMEOUT="30"
 
 ENTRYPOINT [ "/usr/local/bin/netbird-entrypoint.sh" ]
-
-ARG NETBIRD_BINARY=netbird
+ARG TARGETPLATFORM
+ARG NETBIRD_BINARY=$TARGETPLATFORM/netbird
 COPY client/netbird-entrypoint.sh /usr/local/bin/netbird-entrypoint.sh
 COPY "${NETBIRD_BINARY}"  /usr/local/bin/netbird

client/android/profile_manager.go

@@ -6,7 +6,6 @@ import (
 	"fmt"
 	"os"
 	"path/filepath"
-	"strings"
 
 	log "github.com/sirupsen/logrus"
 
@@ -24,6 +23,7 @@ const (
 
 // Profile represents a profile for gomobile
 type Profile struct {
+	ID       string
 	Name     string
 	IsActive bool
 }
@@ -53,10 +53,10 @@ func (p *ProfileArray) Get(i int) *Profile {
 ├── state.json                                  ← Default profile state
 ├── active_profile.json                         ← Active profile tracker (JSON with Name + Username)
 └── profiles/                                   ← Subdirectory for non-default profiles
-    ├── work.json                              ← Work profile config
-    ├── work.state.json                        ← Work profile state
-    ├── personal.json                          ← Personal profile config
-    └── personal.state.json                    ← Personal profile state
+    ├── work.json                              			← Legacy work profile config
+    ├── work.state.json                        			← Legacy work profile state
+    ├── 4c5f5c8198c3989cffb5b5394f5a7ae0.json  			← ID profile config
+    ├── 4c5f5c8198c3989cffb5b5394f5a7ae0.state.json ← ID profile state
 */
 
 // ProfileManager manages profiles for Android
@@ -99,6 +99,7 @@ func (pm *ProfileManager) ListProfiles() (*ProfileArray, error) {
 	var profiles []*Profile
 	for _, p := range internalProfiles {
 		profiles = append(profiles, &Profile{
+			ID:       p.ID.String(),
 			Name:     p.Name,
 			IsActive: p.IsActive,
 		})
@@ -108,55 +109,65 @@ func (pm *ProfileManager) ListProfiles() (*ProfileArray, error) {
 }
 
 // GetActiveProfile returns the currently active profile name
-func (pm *ProfileManager) GetActiveProfile() (string, error) {
+func (pm *ProfileManager) GetActiveProfile() (*Profile, error) {
 	// Use ServiceManager to stay consistent with ListProfiles
 	// ServiceManager uses active_profile.json
 	activeState, err := pm.serviceMgr.GetActiveProfileState()
 	if err != nil {
-		return "", fmt.Errorf("failed to get active profile: %w", err)
+		return nil, fmt.Errorf("failed to get active profile: %w", err)
 	}
-	return activeState.Name, nil
+
+	// ActiveProfileState only stores the ID (and username), not the display
+	// name. Resolve the ID to the full profile so callers get the real Name.
+	prof, err := pm.serviceMgr.ResolveProfile(activeState.ID.String(), androidUsername)
+	if err != nil {
+		return nil, fmt.Errorf("failed to resolve active profile %q: %w", activeState.ID, err)
+	}
+	return &Profile{ID: prof.ID.String(), Name: prof.Name, IsActive: true}, nil
 }
 
 // SwitchProfile switches to a different profile
-func (pm *ProfileManager) SwitchProfile(profileName string) error {
+func (pm *ProfileManager) SwitchProfile(id string) error {
 	// Use ServiceManager to stay consistent with ListProfiles
 	// ServiceManager uses active_profile.json
 	err := pm.serviceMgr.SetActiveProfileState(&profilemanager.ActiveProfileState{
-		Name:     profileName,
+		ID:       profilemanager.ID(id),
 		Username: androidUsername,
 	})
 	if err != nil {
 		return fmt.Errorf("failed to switch profile: %w", err)
 	}
 
-	log.Infof("switched to profile: %s", profileName)
+	log.Infof("switched to profile: %s", id)
 	return nil
 }
 
 // AddProfile creates a new profile
 func (pm *ProfileManager) AddProfile(profileName string) error {
 	// Use ServiceManager (creates profile in profiles/ directory)
-	if err := pm.serviceMgr.AddProfile(profileName, androidUsername); err != nil {
+	profile, err := pm.serviceMgr.AddProfile(profileName, androidUsername)
+	if err != nil {
 		return fmt.Errorf("failed to add profile: %w", err)
 	}
 
-	log.Infof("created new profile: %s", profileName)
+	log.Infof("created new profile: %s", profile.ID)
 	return nil
 }
 
 // LogoutProfile logs out from a profile (clears authentication)
-func (pm *ProfileManager) LogoutProfile(profileName string) error {
-	profileName = sanitizeProfileName(profileName)
-
-	configPath, err := pm.getProfileConfigPath(profileName)
+func (pm *ProfileManager) LogoutProfile(id string) error {
+	configPath, err := pm.getProfileConfigPath(id)
 	if err != nil {
 		return err
 	}
 
+	if !profilemanager.IsValidProfileFilenameStem(profilemanager.ID(id)) {
+		return fmt.Errorf("id '%s' is not valid", id)
+	}
+
 	// Check if profile exists
 	if _, err := os.Stat(configPath); os.IsNotExist(err) {
-		return fmt.Errorf("profile '%s' does not exist", profileName)
+		return fmt.Errorf("profile '%s' does not exist", id)
 	}
 
 	// Read current config using internal profilemanager
@@ -174,53 +185,57 @@ func (pm *ProfileManager) LogoutProfile(profileName string) error {
 		return fmt.Errorf("failed to save config: %w", err)
 	}
 
-	log.Infof("logged out from profile: %s", profileName)
+	log.Infof("logged out from profile: %s", id)
 	return nil
 }
 
 // RemoveProfile deletes a profile
-func (pm *ProfileManager) RemoveProfile(profileName string) error {
+func (pm *ProfileManager) RemoveProfile(id string) error {
 	// Use ServiceManager (removes profile from profiles/ directory)
-	if err := pm.serviceMgr.RemoveProfile(profileName, androidUsername); err != nil {
+	if err := pm.serviceMgr.RemoveProfile(profilemanager.ID(id), androidUsername); err != nil {
 		return fmt.Errorf("failed to remove profile: %w", err)
 	}
 
-	log.Infof("removed profile: %s", profileName)
+	log.Infof("removed profile: %s", id)
 	return nil
 }
 
 // getProfileConfigPath returns the config file path for a profile
 // This is needed for Android-specific path handling (netbird.cfg for default profile)
-func (pm *ProfileManager) getProfileConfigPath(profileName string) (string, error) {
-	if profileName == "" || profileName == profilemanager.DefaultProfileName {
+func (pm *ProfileManager) getProfileConfigPath(id string) (string, error) {
+	if !profilemanager.IsValidProfileFilenameStem(profilemanager.ID(id)) {
+		return "", fmt.Errorf("id %q is not valid", id)
+	}
+
+	if id == profilemanager.DefaultProfileName {
 		// Android uses netbird.cfg for default profile instead of default.json
 		// Default profile is stored in root configDir, not in profiles/
 		return filepath.Join(pm.configDir, defaultConfigFilename), nil
 	}
 
-	// Non-default profiles are stored in profiles subdirectory
-	// This matches the Java Preferences.java expectation
-	profileName = sanitizeProfileName(profileName)
 	profilesDir := filepath.Join(pm.configDir, profilesSubdir)
-	return filepath.Join(profilesDir, profileName+".json"), nil
+	return filepath.Join(profilesDir, id+".json"), nil
 }
 
-// GetConfigPath returns the config file path for a given profile
+// GetConfigPath returns the config file path for a given profile id
 // Java should call this instead of constructing paths with Preferences.configFile()
-func (pm *ProfileManager) GetConfigPath(profileName string) (string, error) {
-	return pm.getProfileConfigPath(profileName)
+func (pm *ProfileManager) GetConfigPath(id string) (string, error) {
+	return pm.getProfileConfigPath(id)
 }
 
 // GetStateFilePath returns the state file path for a given profile
 // Java should call this instead of constructing paths with Preferences.stateFile()
-func (pm *ProfileManager) GetStateFilePath(profileName string) (string, error) {
-	if profileName == "" || profileName == profilemanager.DefaultProfileName {
+func (pm *ProfileManager) GetStateFilePath(id string) (string, error) {
+	if id == "" || id == profilemanager.DefaultProfileName {
 		return filepath.Join(pm.configDir, "state.json"), nil
 	}
 
-	profileName = sanitizeProfileName(profileName)
+	if !profilemanager.IsValidProfileFilenameStem(profilemanager.ID(id)) {
+		return "", fmt.Errorf("id %q is not valid", id)
+	}
+
 	profilesDir := filepath.Join(pm.configDir, profilesSubdir)
-	return filepath.Join(profilesDir, profileName+".state.json"), nil
+	return filepath.Join(profilesDir, id+".state.json"), nil
 }
 
 // GetActiveConfigPath returns the config file path for the currently active profile
@@ -230,7 +245,7 @@ func (pm *ProfileManager) GetActiveConfigPath() (string, error) {
 	if err != nil {
 		return "", fmt.Errorf("failed to get active profile: %w", err)
 	}
-	return pm.GetConfigPath(activeProfile)
+	return pm.GetConfigPath(activeProfile.ID)
 }
 
 // GetActiveStateFilePath returns the state file path for the currently active profile
@@ -240,18 +255,5 @@ func (pm *ProfileManager) GetActiveStateFilePath() (string, error) {
 	if err != nil {
 		return "", fmt.Errorf("failed to get active profile: %w", err)
 	}
-	return pm.GetStateFilePath(activeProfile)
-}
-
-// sanitizeProfileName removes invalid characters from profile name
-func sanitizeProfileName(name string) string {
-	// Keep only alphanumeric, underscore, and hyphen
-	var result strings.Builder
-	for _, r := range name {
-		if (r >= 'a' && r <= 'z') || (r >= 'A' && r <= 'Z') ||
-			(r >= '0' && r <= '9') || r == '_' || r == '-' {
-			result.WriteRune(r)
-		}
-	}
-	return result.String()
+	return pm.GetStateFilePath(activeProfile.ID)
 }

client/cmd/debug.go

@@ -3,12 +3,14 @@ package cmd
 import (
 	"context"
 	"fmt"
+	"os/user"
 	"strings"
 	"time"
 
 	log "github.com/sirupsen/logrus"
 	"github.com/spf13/cobra"
 	"google.golang.org/grpc/status"
+	"google.golang.org/protobuf/encoding/protojson"
 	"google.golang.org/protobuf/types/known/durationpb"
 
 	"github.com/netbirdio/netbird/client/internal"
@@ -19,6 +21,7 @@ import (
 	"github.com/netbirdio/netbird/client/server"
 	mgmProto "github.com/netbirdio/netbird/shared/management/proto"
 	"github.com/netbirdio/netbird/upload-server/types"
+	"github.com/netbirdio/netbird/version"
 )
 
 const errCloseConnection = "Failed to close connection: %v"
@@ -84,6 +87,73 @@ var persistenceCmd = &cobra.Command{
 	RunE:    setSyncResponsePersistence,
 }
 
+var debugConfigCmd = &cobra.Command{
+	Use:     "config",
+	Example: "  netbird debug config",
+	Short:   "Dump the effective configuration",
+	Long:    "Prints the daemon's resolved configuration (after applying defaults, file, env, CLI input, and MDM policy overrides) as JSON. Includes the list of MDM-managed fields.",
+	RunE:    debugConfigDump,
+}
+
+// debugConfigDump implements `netbird debug config`. It resolves the
+// active profile, queries the daemon for the effective configuration
+// via GetConfig, and prints the resulting GetConfigResponse as JSON
+// (via protojson with EmitUnpopulated=true so the output is stable
+// across runs and includes zero-valued fields).
+//
+// Useful for verifying MDM enforcement end-to-end: the response's
+// mDMManagedFields array is the single source of truth for "which
+// fields is the daemon currently enforcing from the MDM source", and
+// every config field side-by-side with that list confirms the merge
+// result. Secrets in the response (e.g. PreSharedKey) are already
+// redacted by the daemon-side handler.
+func debugConfigDump(cmd *cobra.Command, _ []string) error {
+	pm := profilemanager.NewProfileManager()
+	activeProf, err := pm.GetActiveProfile()
+	if err != nil {
+		return fmt.Errorf("get active profile: %v", err)
+	}
+	currUser, err := user.Current()
+	if err != nil {
+		return fmt.Errorf("get current user: %v", err)
+	}
+
+	conn, err := getClient(cmd)
+	if err != nil {
+		return err
+	}
+	defer func() {
+		if err := conn.Close(); err != nil {
+			log.Errorf(errCloseConnection, err)
+		}
+	}()
+
+	client := proto.NewDaemonServiceClient(conn)
+	resp, err := client.GetConfig(cmd.Context(), &proto.GetConfigRequest{
+		ProfileName: activeProf.Name,
+		Username:    currUser.Username,
+	})
+	if err != nil {
+		return fmt.Errorf("failed to get config: %v", status.Convert(err).Message())
+	}
+
+	// Use protojson so well-known fields render correctly; emit defaults so
+	// the operator sees every field even when zero/empty.
+	m := protojson.MarshalOptions{Multiline: true, Indent: "  ", EmitUnpopulated: true}
+	out, err := m.Marshal(resp)
+	if err != nil {
+		return fmt.Errorf("marshal config: %w", err)
+	}
+	cmd.Println(string(out))
+	return nil
+}
+
+// debugBundle requests the daemon to create a debug bundle and prints
+// the resulting local file path and, if uploaded, the uploaded file
+// key. It uses the package flags (anonymize, system info, log file
+// count, CLI version, optional upload URL) to configure the bundle
+// request. Returns an error if the RPC fails or if the daemon reports
+// an upload failure reason.
 func debugBundle(cmd *cobra.Command, _ []string) error {
 	conn, err := getClient(cmd)
 	if err != nil {
@@ -100,6 +170,7 @@ func debugBundle(cmd *cobra.Command, _ []string) error {
 		Anonymize:    anonymizeFlag,
 		SystemInfo:   systemInfoFlag,
 		LogFileCount: logFileCount,
+		CliVersion:   version.NetbirdVersion(),
 	}
 	if uploadBundleFlag {
 		request.UploadURL = uploadBundleURLFlag
@@ -298,6 +369,7 @@ func runForDuration(cmd *cobra.Command, args []string) error {
 		Anonymize:    anonymizeFlag,
 		SystemInfo:   systemInfoFlag,
 		LogFileCount: logFileCount,
+		CliVersion:   version.NetbirdVersion(),
 	}
 	if uploadBundleFlag {
 		request.UploadURL = uploadBundleURLFlag
@@ -432,6 +504,7 @@ func generateDebugBundle(config *profilemanager.Config, recorder *peer.Status, c
 			SyncResponse:   syncResponse,
 			LogPath:        logFilePath,
 			CPUProfile:     nil,
+			DaemonVersion:  version.NetbirdVersion(), // acting as daemon
 		},
 		debug.BundleConfig{
 			IncludeSystemInfo: true,

client/cmd/kubernetes.go

@@ -0,0 +1,301 @@
+package cmd
+
+import (
+	"context"
+	"crypto/tls"
+	"encoding/json"
+	"errors"
+	"fmt"
+	"io"
+	"net"
+	"net/http"
+	"net/url"
+	"os"
+	"path/filepath"
+	"slices"
+	"strings"
+
+	"github.com/goccy/go-yaml"
+	log "github.com/sirupsen/logrus"
+	"github.com/spf13/cobra"
+
+	"github.com/netbirdio/netbird/client/proto"
+)
+
+const (
+	KubernetesDNSSuffix = "netbird-kubeapi-proxy"
+)
+
+var kubernetesCmd = &cobra.Command{
+	Use:   "kubernetes",
+	Short: "Kubernetes cluster commands.",
+	Long:  "Kubernetes cluster commands.",
+}
+
+var kubernetesListCmd = &cobra.Command{
+	Use:   "list",
+	RunE:  kubernetesList,
+	Short: "List Kubernetes clusters.",
+	Long:  "List Kubernetes clusters by discovering NetBird peers running netbird-kubeapi-proxy.",
+}
+
+var kubernetesWriteKubeconfigCmd = &cobra.Command{
+	Use:   "write-kubeconfig",
+	RunE:  kubernetesWriteKubeconfig,
+	Args:  cobra.ExactArgs(1),
+	Short: "Write kubeconfig for a Kubernetes cluster.",
+	Long:  "Updates kubeconfig in place to allow token-less access to the Kubernetes cluster through NetBird.",
+}
+
+func init() {
+	kubernetesWriteKubeconfigCmd.Flags().String("kubeconfig", "", "path to kubeconfig file")
+}
+
+func kubernetesList(cmd *cobra.Command, _ []string) error {
+	conn, err := getClient(cmd)
+	if err != nil {
+		return err
+	}
+	defer conn.Close()
+	client := proto.NewDaemonServiceClient(conn)
+	statusResp, err := client.Status(cmd.Context(), &proto.StatusRequest{GetFullPeerStatus: true})
+	if err != nil {
+		return err
+	}
+
+	kcs, err := getKubernetesClusters(cmd.Context(), statusResp.FullStatus.Peers, "")
+	if err != nil {
+		return err
+	}
+	if len(kcs) == 0 {
+		cmd.Println("No Kubernetes clusters available.")
+		return nil
+	}
+	cmd.Println("Available Kubernetes clusters:")
+	for _, k := range kcs {
+		cmd.Printf("\n  - Name: %s\n    FQDN: %s\n    Version: %s\n", k.name, k.url.Host, k.version)
+	}
+	return nil
+}
+
+func kubernetesWriteKubeconfig(cmd *cobra.Command, args []string) error {
+	kubeconfigPath, err := resolveKubeconfigPath(cmd)
+	if err != nil {
+		return err
+	}
+
+	conn, err := getClient(cmd)
+	if err != nil {
+		return err
+	}
+	defer conn.Close()
+	client := proto.NewDaemonServiceClient(conn)
+	statusResp, err := client.Status(cmd.Context(), &proto.StatusRequest{GetFullPeerStatus: true})
+	if err != nil {
+		return err
+	}
+
+	clusterName := args[0]
+	kcs, err := getKubernetesClusters(cmd.Context(), statusResp.FullStatus.Peers, clusterName)
+	if err != nil {
+		return err
+	}
+	if len(kcs) == 0 {
+		return fmt.Errorf("kubernetes cluster named %s not found", clusterName)
+	}
+	if len(kcs) > 1 {
+		return fmt.Errorf("too many Kubernetes clusters returned")
+	}
+	err = writeKubeconfig(kubeconfigPath, kcs[0])
+	if err != nil {
+		return err
+	}
+	return nil
+}
+
+type kubernetesCluster struct {
+	name    string
+	url     *url.URL
+	version string
+}
+
+func getKubernetesClusters(ctx context.Context, peers []*proto.PeerState, nameFilter string) ([]kubernetesCluster, error) {
+	transport := http.DefaultTransport.(*http.Transport).Clone()
+	transport.TLSClientConfig = &tls.Config{
+		InsecureSkipVerify: true,
+	}
+	httpClient := &http.Client{
+		Transport: transport,
+	}
+	resolver := net.Resolver{
+		// Required so both DNS records are returned.
+		// https://github.com/golang/go/issues/17093
+		PreferGo: true,
+	}
+
+	kcs := []kubernetesCluster{}
+	attempted := map[string]struct{}{}
+	for _, peer := range peers {
+		fqdns, err := resolver.LookupAddr(ctx, peer.IP)
+		if err != nil {
+			return nil, err
+		}
+		for _, fqdn := range fqdns {
+			if _, ok := attempted[fqdn]; ok {
+				continue
+			}
+			attempted[fqdn] = struct{}{}
+			comps := strings.Split(fqdn, ".")
+			if len(comps) < 2 {
+				continue
+			}
+			if comps[1] != KubernetesDNSSuffix {
+				continue
+			}
+			if nameFilter != "" && nameFilter != comps[0] {
+				continue
+			}
+			clusterURL, clusterVersion, err := fingerprintClusters(ctx, httpClient, fqdn)
+			if err != nil {
+				log.Debugf("could not fingerprint Kubernetes cluster %s %q", fqdn, err)
+				continue
+			}
+			kc := kubernetesCluster{
+				name:    comps[0],
+				url:     clusterURL,
+				version: clusterVersion,
+			}
+			if nameFilter != "" {
+				return []kubernetesCluster{kc}, nil
+			}
+			kcs = append(kcs, kc)
+		}
+	}
+	return kcs, nil
+}
+
+func fingerprintClusters(ctx context.Context, httpClient *http.Client, fqdn string) (*url.URL, string, error) {
+	clusterURL, err := url.Parse("https://" + fqdn)
+	if err != nil {
+		return nil, "", err
+	}
+	versionURL, err := clusterURL.Parse("/version")
+	if err != nil {
+		return nil, "", err
+	}
+	req, err := http.NewRequestWithContext(ctx, http.MethodGet, versionURL.String(), nil)
+	if err != nil {
+		return nil, "", err
+	}
+	resp, err := httpClient.Do(req)
+	if err != nil {
+		return nil, "", err
+	}
+	defer resp.Body.Close()
+	if resp.StatusCode != http.StatusOK {
+		return nil, "", fmt.Errorf("expected %d response but got %s", http.StatusOK, resp.Status)
+	}
+	b, err := io.ReadAll(resp.Body)
+	if err != nil {
+		return nil, "", err
+	}
+	versionData := map[string]string{}
+	err = json.Unmarshal(b, &versionData)
+	if err != nil {
+		return nil, "", err
+	}
+	version, ok := versionData["gitVersion"]
+	if !ok {
+		return nil, "", errors.New("no version found in response")
+	}
+	return clusterURL, version, nil
+}
+
+func resolveKubeconfigPath(cmd *cobra.Command) (string, error) {
+	if cmd.Flags().Changed("kubeconfig") {
+		path, err := cmd.Flags().GetString("kubeconfig")
+		if err != nil {
+			return "", err
+		}
+		return path, nil
+	}
+	if env := os.Getenv("KUBECONFIG"); env != "" {
+		return env, nil
+	}
+	home, err := os.UserHomeDir()
+	if err != nil {
+		return "", fmt.Errorf("could not determine home directory: %w", err)
+	}
+	return filepath.Join(home, ".kube", "config"), nil
+}
+
+func writeKubeconfig(kubeconfigPath string, kc kubernetesCluster) error {
+	b, err := os.ReadFile(kubeconfigPath)
+	if err != nil && !errors.Is(err, os.ErrNotExist) {
+		return err
+	}
+	var cfg map[string]any
+	if err := yaml.Unmarshal(b, &cfg); err != nil {
+		return err
+	}
+	if cfg == nil {
+		cfg = map[string]any{
+			"apiVersion": "v1",
+			"kind":       "Config",
+		}
+	}
+
+	cfg["clusters"] = appendWithName(cfg["clusters"], map[string]any{
+		"name": kc.name,
+		"cluster": map[string]any{
+			"server":                   kc.url.String(),
+			"insecure-skip-tls-verify": true,
+		},
+	})
+	cfg["users"] = appendWithName(cfg["users"], map[string]any{
+		"name": "netbird",
+		"user": map[string]any{
+			"token": "none",
+		},
+	})
+	cfg["contexts"] = appendWithName(cfg["contexts"], map[string]any{
+		"name": kc.name,
+		"context": map[string]any{
+			"cluster":   kc.name,
+			"user":      "netbird",
+			"namespace": "default",
+		},
+	})
+	cfg["current-context"] = kc.name
+
+	out, err := yaml.Marshal(cfg)
+	if err != nil {
+		return err
+	}
+	if err := os.WriteFile(kubeconfigPath, out, 0o600); err != nil {
+		return err
+	}
+	return nil
+}
+
+func appendWithName(data any, add map[string]any) any {
+	if data == nil {
+		return []any{add}
+	}
+	v, ok := data.([]any)
+	if !ok {
+		return []any{add}
+	}
+	i := slices.IndexFunc(v, func(item any) bool {
+		m, ok := item.(map[string]any)
+		if !ok {
+			return false
+		}
+		return m["name"] == add["name"]
+	})
+	if i == -1 {
+		return append(v, add)
+	}
+	v[i] = add
+	return v
+}

client/cmd/kubernetes_test.go

@@ -0,0 +1,120 @@
+package cmd
+
+import (
+	"net/http"
+	"net/http/httptest"
+	"net/url"
+	"os"
+	"path/filepath"
+	"testing"
+
+	"github.com/spf13/cobra"
+	"github.com/stretchr/testify/require"
+)
+
+func TestFingerprintClusters(t *testing.T) {
+	t.Parallel()
+
+	srv := httptest.NewTLSServer(http.HandlerFunc(func(w http.ResponseWriter, r *http.Request) {
+		//nolint: errcheck
+		w.Write([]byte(`{"gitVersion": "foobar"}`))
+	}))
+	defer srv.Close()
+
+	clusterURL, clusterVersion, err := fingerprintClusters(t.Context(), srv.Client(), srv.Listener.Addr().String())
+	require.NoError(t, err)
+	require.Equal(t, srv.URL, clusterURL.String())
+	require.Equal(t, "foobar", clusterVersion)
+}
+
+func TestResolveKubeconfigPath(t *testing.T) {
+	home, err := os.UserHomeDir()
+	if err != nil {
+		t.Fatalf("could not determine home directory: %v", err)
+	}
+	defaultPath := filepath.Join(home, ".kube", "config")
+	path, err := resolveKubeconfigPath(&cobra.Command{})
+	require.NoError(t, err)
+	require.Equal(t, defaultPath, path)
+
+	flagPath := "flag-path"
+	cmd := &cobra.Command{}
+	cmd.Flags().String("kubeconfig", "", "")
+	err = cmd.Flags().Set("kubeconfig", flagPath)
+	require.NoError(t, err)
+	path, err = resolveKubeconfigPath(cmd)
+	require.NoError(t, err)
+	require.Equal(t, flagPath, path)
+
+	envPath := "env-path"
+	t.Setenv("KUBECONFIG", envPath)
+	path, err = resolveKubeconfigPath(&cobra.Command{})
+	require.NoError(t, err)
+	require.Equal(t, envPath, path)
+}
+
+func TestWriteKubeconfig(t *testing.T) {
+	t.Parallel()
+
+	tests := []struct {
+		name     string
+		existing string
+	}{
+		{
+			name: "empty file",
+		},
+		{
+			name: "existing content",
+			existing: `apiVersion: v1
+clusters:
+- cluster:
+    insecure-skip-tls-verify: true
+    server: https://foobar.com
+  name: foo
+current-context: test
+kind: Config
+users: []
+`,
+		},
+	}
+	for _, tt := range tests {
+		t.Run(tt.name, func(t *testing.T) {
+			t.Parallel()
+
+			kubeconfigPath := filepath.Join(t.TempDir(), "config")
+			err := os.WriteFile(kubeconfigPath, []byte(tt.existing), 0o644)
+			require.NoError(t, err)
+
+			kc := kubernetesCluster{
+				name: "foo",
+				url:  &url.URL{Scheme: "https", Host: "example.com"},
+			}
+			err = writeKubeconfig(kubeconfigPath, kc)
+			require.NoError(t, err)
+
+			b, err := os.ReadFile(kubeconfigPath)
+			require.NoError(t, err)
+			expected := `apiVersion: v1
+clusters:
+- cluster:
+    insecure-skip-tls-verify: true
+    server: https://example.com
+  name: foo
+contexts:
+- context:
+    cluster: foo
+    namespace: default
+    user: netbird
+  name: foo
+current-context: foo
+kind: Config
+users:
+- name: netbird
+  user:
+    token: none
+`
+			require.Equal(t, expected, string(b))
+		})
+	}
+
+}

client/cmd/login.go

@@ -96,17 +96,19 @@ func doDaemonLogin(ctx context.Context, cmd *cobra.Command, providedSetupKey str
 		dnsLabelsReq = dnsLabelsValidated.ToSafeStringList()
 	}
 
+	handle := activeProf.ID.String()
+
 	loginRequest := proto.LoginRequest{
 		SetupKey:            providedSetupKey,
 		ManagementUrl:       managementURL,
 		IsUnixDesktopClient: isUnixRunningDesktop(),
 		Hostname:            hostName,
 		DnsLabels:           dnsLabelsReq,
-		ProfileName:         &activeProf.Name,
+		ProfileName:         &handle,
 		Username:            &username,
 	}
 
-	profileState, err := pm.GetProfileState(activeProf.Name)
+	profileState, err := pm.GetProfileState(activeProf.ID)
 	if err != nil {
 		log.Debugf("failed to get profile state for login hint: %v", err)
 	} else if profileState.Email != "" {
@@ -170,14 +172,13 @@ func getActiveProfile(ctx context.Context, pm *profilemanager.ProfileManager, pr
 	return activeProf, nil
 }
 
-func switchProfileOnDaemon(ctx context.Context, pm *profilemanager.ProfileManager, profileName string, username string) error {
-	err := switchProfile(context.Background(), profileName, username)
+func switchProfileOnDaemon(ctx context.Context, pm *profilemanager.ProfileManager, handle string, username string) error {
+	resolvedID, err := switchProfile(ctx, handle, username)
 	if err != nil {
 		return fmt.Errorf("switch profile on daemon: %v", err)
 	}
 
-	err = pm.SwitchProfile(profileName)
-	if err != nil {
+	if err := pm.SwitchProfile(resolvedID); err != nil {
 		return fmt.Errorf("switch profile: %v", err)
 	}
 
@@ -205,11 +206,15 @@ func switchProfileOnDaemon(ctx context.Context, pm *profilemanager.ProfileManage
 	return nil
 }
 
-func switchProfile(ctx context.Context, profileName string, username string) error {
+// switchProfile asks the daemon to switch to the profile identified by
+// handle (a name, ID, or unique ID prefix). Returns the resolved profile
+// ID so the caller can update the local active-profile state without
+// re-resolving the handle.
+func switchProfile(ctx context.Context, handle string, username string) (profilemanager.ID, error) {
 	conn, err := DialClientGRPCServer(ctx, daemonAddr)
 	if err != nil {
 		//nolint
-		return fmt.Errorf("failed to connect to daemon error: %v\n"+
+		return "", fmt.Errorf("failed to connect to daemon error: %v\n"+
 			"If the daemon is not running please run: "+
 			"\nnetbird service install \nnetbird service start\n", err)
 	}
@@ -217,15 +222,15 @@ func switchProfile(ctx context.Context, profileName string, username string) err
 
 	client := proto.NewDaemonServiceClient(conn)
 
-	_, err = client.SwitchProfile(ctx, &proto.SwitchProfileRequest{
-		ProfileName: &profileName,
+	resp, err := client.SwitchProfile(ctx, &proto.SwitchProfileRequest{
+		ProfileName: &handle,
 		Username:    &username,
 	})
 	if err != nil {
-		return fmt.Errorf("switch profile failed: %v", err)
+		return "", fmt.Errorf("switch profile failed: %v", err)
 	}
 
-	return nil
+	return profilemanager.ID(resp.Id), nil
 }
 
 func doForegroundLogin(ctx context.Context, cmd *cobra.Command, setupKey string, activeProf *profilemanager.Profile) error {
@@ -249,7 +254,7 @@ func doForegroundLogin(ctx context.Context, cmd *cobra.Command, setupKey string,
 		return fmt.Errorf("read config file %s: %v", configFilePath, err)
 	}
 
-	err = foregroundLogin(ctx, cmd, config, setupKey, activeProf.Name)
+	err = foregroundLogin(ctx, cmd, config, setupKey, activeProf.ID)
 	if err != nil {
 		return fmt.Errorf("foreground login failed: %v", err)
 	}
@@ -277,7 +282,7 @@ func handleSSOLogin(ctx context.Context, cmd *cobra.Command, loginResp *proto.Lo
 	return nil
 }
 
-func foregroundLogin(ctx context.Context, cmd *cobra.Command, config *profilemanager.Config, setupKey, profileName string) error {
+func foregroundLogin(ctx context.Context, cmd *cobra.Command, config *profilemanager.Config, setupKey string, profileID profilemanager.ID) error {
 	authClient, err := auth.NewAuth(ctx, config.PrivateKey, config.ManagementURL, config)
 	if err != nil {
 		return fmt.Errorf("failed to create auth client: %v", err)
@@ -291,7 +296,7 @@ func foregroundLogin(ctx context.Context, cmd *cobra.Command, config *profileman
 
 	jwtToken := ""
 	if setupKey == "" && needsLogin {
-		tokenInfo, err := foregroundGetTokenInfo(ctx, cmd, config, profileName)
+		tokenInfo, err := foregroundGetTokenInfo(ctx, cmd, config, profileID)
 		if err != nil {
 			return fmt.Errorf("interactive sso login failed: %v", err)
 		}
@@ -306,10 +311,10 @@ func foregroundLogin(ctx context.Context, cmd *cobra.Command, config *profileman
 	return nil
 }
 
-func foregroundGetTokenInfo(ctx context.Context, cmd *cobra.Command, config *profilemanager.Config, profileName string) (*auth.TokenInfo, error) {
+func foregroundGetTokenInfo(ctx context.Context, cmd *cobra.Command, config *profilemanager.Config, profileID profilemanager.ID) (*auth.TokenInfo, error) {
 	hint := ""
 	pm := profilemanager.NewProfileManager()
-	profileState, err := pm.GetProfileState(profileName)
+	profileState, err := pm.GetProfileState(profileID)
 	if err != nil {
 		log.Debugf("failed to get profile state for login hint: %v", err)
 	} else if profileState.Email != "" {

client/cmd/login_test.go

@@ -27,7 +27,7 @@ func TestLogin(t *testing.T) {
 	profilemanager.ActiveProfileStatePath = tempDir + "/active_profile.json"
 	sm := profilemanager.ServiceManager{}
 	err = sm.SetActiveProfileState(&profilemanager.ActiveProfileState{
-		Name:     "default",
+		ID:       "default",
 		Username: currUser.Username,
 	})
 	if err != nil {

client/cmd/profile.go

@@ -2,11 +2,16 @@ package cmd
 
 import (
 	"context"
+	"errors"
 	"fmt"
 	"os/user"
+	"strings"
+	"text/tabwriter"
 	"time"
 
 	"github.com/spf13/cobra"
+	"google.golang.org/grpc/codes"
+	gstatus "google.golang.org/grpc/status"
 
 	"github.com/netbirdio/netbird/client/internal"
 	"github.com/netbirdio/netbird/client/internal/profilemanager"
@@ -14,6 +19,8 @@ import (
 	"github.com/netbirdio/netbird/util"
 )
 
+var profileListShowID bool
+
 var profileCmd = &cobra.Command{
 	Use:   "profile",
 	Short: "Manage NetBird client profiles",
@@ -31,27 +38,40 @@ var profileListCmd = &cobra.Command{
 var profileAddCmd = &cobra.Command{
 	Use:   "add <profile_name>",
 	Short: "Add a new profile",
-	Long:  `Add a new profile to the NetBird client. The profile name must be unique.`,
+	Long:  `Add a new profile. Profile name is free-form, a unique ID is generated for the on-disk config file.`,
 	Args:  cobra.ExactArgs(1),
 	RunE:  addProfileFunc,
 }
 
+var profileRenameCmd = &cobra.Command{
+	Use:   "rename <profile> <new_profile_name>",
+	Short: "Renames an existing profile",
+	Long:  `Renames an existing profile (by a name, ID, or unique ID prefix). Profile name is free-form.`,
+	Args:  cobra.ExactArgs(2),
+	RunE:  renameProfileFunc,
+}
+
 var profileRemoveCmd = &cobra.Command{
-	Use:   "remove <profile_name>",
-	Short: "Remove a profile",
-	Long:  `Remove a profile from the NetBird client. The profile must not be inactive.`,
-	Args:  cobra.ExactArgs(1),
-	RunE:  removeProfileFunc,
+	Use:     "remove <profile>",
+	Short:   "Remove a profile",
+	Long:    `Remove a profile by name, ID, or unique ID prefix.`,
+	Aliases: []string{"rm"},
+	Args:    cobra.ExactArgs(1),
+	RunE:    removeProfileFunc,
 }
 
 var profileSelectCmd = &cobra.Command{
-	Use:   "select <profile_name>",
+	Use:   "select <profile>",
 	Short: "Select a profile",
-	Long:  `Make the specified profile active. This will switch the client to use the selected profile's configuration.`,
+	Long:  `Make the specified profile active. Accepts a name, ID, or unique ID prefix.`,
 	Args:  cobra.ExactArgs(1),
 	RunE:  selectProfileFunc,
 }
 
+func init() {
+	profileListCmd.Flags().BoolVar(&profileListShowID, "show-id", false, "show the profile ID column")
+}
+
 func setupCmd(cmd *cobra.Command) error {
 	SetFlagsFromEnvVars(rootCmd)
 	SetFlagsFromEnvVars(cmd)
@@ -65,6 +85,7 @@ func setupCmd(cmd *cobra.Command) error {
 
 	return nil
 }
+
 func listProfilesFunc(cmd *cobra.Command, _ []string) error {
 	if err := setupCmd(cmd); err != nil {
 		return err
@@ -83,25 +104,33 @@ func listProfilesFunc(cmd *cobra.Command, _ []string) error {
 
 	daemonClient := proto.NewDaemonServiceClient(conn)
 
-	profiles, err := daemonClient.ListProfiles(cmd.Context(), &proto.ListProfilesRequest{
+	resp, err := daemonClient.ListProfiles(cmd.Context(), &proto.ListProfilesRequest{
 		Username: currUser.Username,
 	})
 	if err != nil {
 		return err
 	}
 
-	// list profiles, add a tick if the profile is active
-	cmd.Println("Found", len(profiles.Profiles), "profiles:")
-	for _, profile := range profiles.Profiles {
-		// use a cross to indicate the passive profiles
-		activeMarker := "✗"
-		if profile.IsActive {
-			activeMarker = "✓"
-		}
-		cmd.Println(activeMarker, profile.Name)
+	tw := tabwriter.NewWriter(cmd.OutOrStdout(), 0, 0, 2, ' ', 0)
+	if profileListShowID {
+		fmt.Fprintln(tw, "ID\tNAME\tACTIVE")
+	} else {
+		fmt.Fprintln(tw, "NAME\tACTIVE")
 	}
-
-	return nil
+	for _, profile := range resp.Profiles {
+		marker := ""
+		if profile.IsActive {
+			marker = "✓"
+		}
+		name := profilemanager.StripCtrlChars(profile.Name)
+		id := profilemanager.ID(profile.Id)
+		if profileListShowID {
+			fmt.Fprintf(tw, "%s\t%s\t%s\n", id.ShortID(), name, marker)
+		} else {
+			fmt.Fprintf(tw, "%s\t%s\n", name, marker)
+		}
+	}
+	return tw.Flush()
 }
 
 func addProfileFunc(cmd *cobra.Command, args []string) error {
@@ -121,21 +150,82 @@ func addProfileFunc(cmd *cobra.Command, args []string) error {
 	}
 
 	daemonClient := proto.NewDaemonServiceClient(conn)
-
 	profileName := args[0]
 
-	_, err = daemonClient.AddProfile(cmd.Context(), &proto.AddProfileRequest{
+	resp, err := daemonClient.AddProfile(cmd.Context(), &proto.AddProfileRequest{
 		ProfileName: profileName,
 		Username:    currUser.Username,
 	})
 	if err != nil {
+		return fmt.Errorf("add profile request: %w", err)
+	}
+
+	dupCount, _ := countProfilesWithName(cmd.Context(), daemonClient, currUser.Username, profileName)
+	if dupCount > 1 {
+		cmd.Printf("Warning: %d other profile(s) already use the name %q.\n", dupCount-1, profileName)
+		cmd.Println("Use `netbird profile list --show-id` to disambiguate later.")
+	}
+
+	id := profilemanager.ID(resp.Id)
+	cmd.Printf("Profile added: %s  %s\n", id.ShortID(), profilemanager.StripCtrlChars(profileName))
+	return nil
+
+}
+
+func renameProfileFunc(cmd *cobra.Command, args []string) error {
+	if err := setupCmd(cmd); err != nil {
 		return err
 	}
 
-	cmd.Println("Profile added successfully:", profileName)
+	conn, err := DialClientGRPCServer(cmd.Context(), daemonAddr)
+	if err != nil {
+		return fmt.Errorf("connect to service CLI interface: %w", err)
+	}
+	defer conn.Close()
+
+	currUser, err := user.Current()
+	if err != nil {
+		return fmt.Errorf("get current user: %w", err)
+	}
+
+	daemonClient := proto.NewDaemonServiceClient(conn)
+	handle := args[0]
+	newProfilename := args[1]
+
+	resp, err := daemonClient.RenameProfile(cmd.Context(), &proto.RenameProfileRequest{
+		Handle:         handle,
+		Username:       currUser.Username,
+		NewProfileName: newProfilename,
+	})
+	if err != nil {
+		return wrapAmbiguityError(err, handle)
+	}
+
+	dupCount, _ := countProfilesWithName(cmd.Context(), daemonClient, currUser.Username, newProfilename)
+	if dupCount > 1 {
+		cmd.Printf("Warning: %d other profile(s) already use the name %q.\n", dupCount-1, newProfilename)
+		cmd.Println("Use `netbird profile list --show-id` to disambiguate later.")
+	}
+
+	cmd.Printf("Profile renamed from %s to %s\n", profilemanager.StripCtrlChars(resp.OldProfileName), profilemanager.StripCtrlChars(newProfilename))
+
 	return nil
 }
 
+func countProfilesWithName(ctx context.Context, c proto.DaemonServiceClient, username, name string) (int, error) {
+	resp, err := c.ListProfiles(ctx, &proto.ListProfilesRequest{Username: username})
+	if err != nil {
+		return 0, err
+	}
+	n := 0
+	for _, p := range resp.Profiles {
+		if p.Name == name {
+			n++
+		}
+	}
+	return n, nil
+}
+
 func removeProfileFunc(cmd *cobra.Command, args []string) error {
 	if err := setupCmd(cmd); err != nil {
 		return err
@@ -153,18 +243,17 @@ func removeProfileFunc(cmd *cobra.Command, args []string) error {
 	}
 
 	daemonClient := proto.NewDaemonServiceClient(conn)
+	handle := args[0]
 
-	profileName := args[0]
-
-	_, err = daemonClient.RemoveProfile(cmd.Context(), &proto.RemoveProfileRequest{
-		ProfileName: profileName,
+	resp, err := daemonClient.RemoveProfile(cmd.Context(), &proto.RemoveProfileRequest{
+		ProfileName: handle,
 		Username:    currUser.Username,
 	})
 	if err != nil {
-		return err
+		return wrapAmbiguityError(err, handle)
 	}
 
-	cmd.Println("Profile removed successfully:", profileName)
+	cmd.Printf("Profile removed: %s\n", resp.Id)
 	return nil
 }
 
@@ -174,7 +263,7 @@ func selectProfileFunc(cmd *cobra.Command, args []string) error {
 	}
 
 	profileManager := profilemanager.NewProfileManager()
-	profileName := args[0]
+	handle := args[0]
 
 	currUser, err := user.Current()
 	if err != nil {
@@ -191,32 +280,15 @@ func selectProfileFunc(cmd *cobra.Command, args []string) error {
 
 	daemonClient := proto.NewDaemonServiceClient(conn)
 
-	profiles, err := daemonClient.ListProfiles(ctx, &proto.ListProfilesRequest{
-		Username: currUser.Username,
+	switchResp, err := daemonClient.SwitchProfile(ctx, &proto.SwitchProfileRequest{
+		ProfileName: &handle,
+		Username:    &currUser.Username,
 	})
 	if err != nil {
-		return fmt.Errorf("list profiles: %w", err)
+		return wrapAmbiguityError(err, handle)
 	}
 
-	var profileExists bool
-
-	for _, profile := range profiles.Profiles {
-		if profile.Name == profileName {
-			profileExists = true
-			break
-		}
-	}
-
-	if !profileExists {
-		return fmt.Errorf("profile %s does not exist", profileName)
-	}
-
-	if err := switchProfile(cmd.Context(), profileName, currUser.Username); err != nil {
-		return err
-	}
-
-	err = profileManager.SwitchProfile(profileName)
-	if err != nil {
+	if err := profileManager.SwitchProfile(profilemanager.ID(switchResp.Id)); err != nil {
 		return err
 	}
 
@@ -231,6 +303,30 @@ func selectProfileFunc(cmd *cobra.Command, args []string) error {
 		}
 	}
 
-	cmd.Println("Profile switched successfully to:", profileName)
+	id := profilemanager.ID(switchResp.Id)
+	cmd.Printf("Profile switched to: %s\n", id.ShortID())
 	return nil
 }
+
+// wrapAmbiguityError turns the daemon's gRPC InvalidArgument errors
+// (which carry the resolver's message verbatim) into CLI-friendly text
+// that points the user at --show-id.
+func wrapAmbiguityError(err error, handle string) error {
+	if err == nil {
+		return nil
+	}
+	st, ok := gstatus.FromError(err)
+	if !ok {
+		return err
+	}
+	switch st.Code() {
+	case codes.InvalidArgument:
+		msg := st.Message()
+		if strings.Contains(msg, "ambiguous") {
+			return errors.New(msg + "\nRun `netbird profile list --show-id` to see IDs, then select by ID prefix:\n  netbird profile select|remove <id-prefix>")
+		}
+	case codes.NotFound:
+		return fmt.Errorf("profile %q not found", handle)
+	}
+	return err
+}

client/cmd/root.go

@@ -95,7 +95,9 @@ var (
 	}
 )
 
-// Execute executes the root command.
+// Execute runs the appropriate Cobra command for the CLI.
+// If the process is the update binary it delegates to updateCmd; otherwise it runs the root command.
+// It returns any error produced during command execution.
 func Execute() error {
 	if isUpdateBinary() {
 		return updateCmd.Execute()
@@ -103,6 +105,16 @@ func Execute() error {
 	return rootCmd.Execute()
 }
 
+// init initialises package-level defaults and configures the root
+// Cobra command tree. Sets platform-specific config / log directory
+// paths (including legacy Wiretrustee fallbacks) and a default daemon
+// address; registers persistent CLI flags (daemon address,
+// management / admin URLs, logging, setup key (file and inline,
+// mutually exclusive), preshared key, hostname, anonymise, config
+// path); attaches top-level and nested subcommands to the root
+// command; and registers `up`-specific persistent flags (external IP
+// maps, custom DNS resolver address, Rosenpass options, auto-connect
+// disabling, lazy connection).
 func init() {
 	defaultConfigPathDir = "/etc/netbird/"
 	defaultLogFileDir = "/var/log/netbird/"
@@ -168,10 +180,17 @@ func init() {
 	logCmd.AddCommand(logLevelCmd)
 	debugCmd.AddCommand(forCmd)
 	debugCmd.AddCommand(persistenceCmd)
+	debugCmd.AddCommand(debugConfigCmd)
+
+	// kubernetes commands
+	rootCmd.AddCommand(kubernetesCmd)
+	kubernetesCmd.AddCommand(kubernetesListCmd)
+	kubernetesCmd.AddCommand(kubernetesWriteKubeconfigCmd)
 
 	// profile commands
 	profileCmd.AddCommand(profileListCmd)
 	profileCmd.AddCommand(profileAddCmd)
+	profileCmd.AddCommand(profileRenameCmd)
 	profileCmd.AddCommand(profileRemoveCmd)
 	profileCmd.AddCommand(profileSelectCmd)
 

client/cmd/service_controller.go

@@ -102,7 +102,7 @@ func (p *program) Stop(srv service.Service) error {
 }
 
 // Common setup for service control commands
-func setupServiceControlCommand(cmd *cobra.Command, ctx context.Context, cancel context.CancelFunc) (service.Service, error) {
+func setupServiceControlCommand(cmd *cobra.Command, ctx context.Context, cancel context.CancelFunc, consoleLog bool) (service.Service, error) {
 	// rootCmd env vars are already applied by PersistentPreRunE.
 	SetFlagsFromEnvVars(serviceCmd)
 
@@ -112,8 +112,14 @@ func setupServiceControlCommand(cmd *cobra.Command, ctx context.Context, cancel
 		return nil, err
 	}
 
-	if err := util.InitLog(logLevel, logFiles...); err != nil {
-		return nil, fmt.Errorf("init log: %w", err)
+	if consoleLog {
+		if err := util.InitLog(logLevel, util.LogConsole); err != nil {
+			return nil, fmt.Errorf("init log: %w", err)
+		}
+	} else {
+		if err := util.InitLog(logLevel, logFiles...); err != nil {
+			return nil, fmt.Errorf("init log: %w", err)
+		}
 	}
 
 	cfg, err := newSVCConfig()
@@ -138,7 +144,7 @@ var runCmd = &cobra.Command{
 		SetupCloseHandler(ctx, cancel)
 		SetupDebugHandler(ctx, nil, nil, nil, util.FindFirstLogPath(logFiles))
 
-		s, err := setupServiceControlCommand(cmd, ctx, cancel)
+		s, err := setupServiceControlCommand(cmd, ctx, cancel, false)
 		if err != nil {
 			return err
 		}
@@ -152,7 +158,7 @@ var startCmd = &cobra.Command{
 	Short: "starts NetBird service",
 	RunE: func(cmd *cobra.Command, args []string) error {
 		ctx, cancel := context.WithCancel(cmd.Context())
-		s, err := setupServiceControlCommand(cmd, ctx, cancel)
+		s, err := setupServiceControlCommand(cmd, ctx, cancel, false)
 		if err != nil {
 			return err
 		}
@@ -170,7 +176,7 @@ var stopCmd = &cobra.Command{
 	Short: "stops NetBird service",
 	RunE: func(cmd *cobra.Command, args []string) error {
 		ctx, cancel := context.WithCancel(cmd.Context())
-		s, err := setupServiceControlCommand(cmd, ctx, cancel)
+		s, err := setupServiceControlCommand(cmd, ctx, cancel, false)
 		if err != nil {
 			return err
 		}
@@ -188,7 +194,7 @@ var restartCmd = &cobra.Command{
 	Short: "restarts NetBird service",
 	RunE: func(cmd *cobra.Command, args []string) error {
 		ctx, cancel := context.WithCancel(cmd.Context())
-		s, err := setupServiceControlCommand(cmd, ctx, cancel)
+		s, err := setupServiceControlCommand(cmd, ctx, cancel, false)
 		if err != nil {
 			return err
 		}
@@ -206,7 +212,7 @@ var svcStatusCmd = &cobra.Command{
 	Short: "shows NetBird service status",
 	RunE: func(cmd *cobra.Command, args []string) error {
 		ctx, cancel := context.WithCancel(cmd.Context())
-		s, err := setupServiceControlCommand(cmd, ctx, cancel)
+		s, err := setupServiceControlCommand(cmd, ctx, cancel, true)
 		if err != nil {
 			return err
 		}

client/cmd/testutil_test.go

@@ -11,7 +11,7 @@ import (
 	"go.opentelemetry.io/otel"
 	"google.golang.org/grpc"
 
-	"github.com/netbirdio/management-integrations/integrations"
+	"github.com/netbirdio/netbird/management/server/integrations/integrated_validator/validator"
 
 	nbcache "github.com/netbirdio/netbird/management/server/cache"
 
@@ -109,7 +109,7 @@ func startManagement(t *testing.T, config *config.Config, testFile string) (*grp
 		t.Fatal(err)
 	}
 
-	iv, _ := integrations.NewIntegratedValidator(ctx, peersmanager, settingsManagerMock, eventStore, cacheStore)
+	iv, _ := validator.NewIntegratedValidator(ctx, peersmanager, settingsManagerMock, eventStore, cacheStore)
 
 	metrics, err := telemetry.NewDefaultAppMetrics(ctx)
 	require.NoError(t, err)

client/cmd/up.go

@@ -128,13 +128,12 @@ func upFunc(cmd *cobra.Command, args []string) error {
 	var profileSwitched bool
 	// switch profile if provided
 	if profileName != "" {
-		err = switchProfile(cmd.Context(), profileName, username.Username)
+		resolvedID, err := switchProfile(cmd.Context(), profileName, username.Username)
 		if err != nil {
 			return fmt.Errorf("switch profile: %v", err)
 		}
 
-		err = pm.SwitchProfile(profileName)
-		if err != nil {
+		if err := pm.SwitchProfile(resolvedID); err != nil {
 			return fmt.Errorf("switch profile: %v", err)
 		}
 
@@ -190,7 +189,7 @@ func runInForegroundMode(ctx context.Context, cmd *cobra.Command, activeProf *pr
 
 	_, _ = profilemanager.UpdateOldManagementURL(ctx, config, configFilePath)
 
-	err = foregroundLogin(ctx, cmd, config, providedSetupKey, activeProf.Name)
+	err = foregroundLogin(ctx, cmd, config, providedSetupKey, activeProf.ID)
 	if err != nil {
 		return fmt.Errorf("foreground login failed: %v", err)
 	}
@@ -261,10 +260,10 @@ func runInDaemonMode(ctx context.Context, cmd *cobra.Command, pm *profilemanager
 	}
 
 	// set the new config
-	req := setupSetConfigReq(customDNSAddressConverted, cmd, activeProf.Name, username.Username)
+	req := setupSetConfigReq(customDNSAddressConverted, cmd, activeProf.ID.String(), username.Username)
 	if _, err := client.SetConfig(ctx, req); err != nil {
 		if st, ok := gstatus.FromError(err); ok && st.Code() == codes.Unavailable {
-			log.Warnf("setConfig method is not available in the daemon")
+			log.Warnf("setConfig method is not available in the daemon: %s", st.Message())
 		} else {
 			return fmt.Errorf("call service setConfig method: %v", err)
 		}
@@ -289,10 +288,11 @@ func doDaemonUp(ctx context.Context, cmd *cobra.Command, client proto.DaemonServ
 		return fmt.Errorf("setup login request: %v", err)
 	}
 
-	loginRequest.ProfileName = &activeProf.Name
+	profileID := activeProf.ID.String()
+	loginRequest.ProfileName = &profileID
 	loginRequest.Username = &username
 
-	profileState, err := pm.GetProfileState(activeProf.Name)
+	profileState, err := pm.GetProfileState(activeProf.ID)
 	if err != nil {
 		log.Debugf("failed to get profile state for login hint: %v", err)
 	} else if profileState.Email != "" {
@@ -329,7 +329,7 @@ func doDaemonUp(ctx context.Context, cmd *cobra.Command, client proto.DaemonServ
 	}
 
 	if _, err := client.Up(ctx, &proto.UpRequest{
-		ProfileName: &activeProf.Name,
+		ProfileName: &profileID,
 		Username:    &username,
 	}); err != nil {
 		return fmt.Errorf("call service up method: %v", err)

client/cmd/up_daemon_test.go

@@ -29,14 +29,14 @@ func TestUpDaemon(t *testing.T) {
 	}
 
 	sm := profilemanager.ServiceManager{}
-	err = sm.AddProfile("test1", currUser.Username)
+	created, err := sm.AddProfile("test1", currUser.Username)
 	if err != nil {
 		t.Fatalf("failed to add profile: %v", err)
 		return
 	}
 
 	err = sm.SetActiveProfileState(&profilemanager.ActiveProfileState{
-		Name:     "test1",
+		ID:       created.ID,
 		Username: currUser.Username,
 	})
 	if err != nil {

client/cmd/version.go

@@ -12,7 +12,13 @@ var (
 		Short: "Print the NetBird's client application version",
 		Run: func(cmd *cobra.Command, args []string) {
 			cmd.SetOut(cmd.OutOrStdout())
-			cmd.Println(version.NetbirdVersion())
+			out := version.NetbirdVersion()
+			if version.IsDevelopmentVersion(out) {
+				if commit := version.NetbirdCommit(); commit != "" {
+					out += "-" + commit
+				}
+			}
+			cmd.Println(out)
 		},
 	}
 )

client/embed/embed.go

@@ -12,6 +12,7 @@ import (
 	"sync"
 
 	"github.com/sirupsen/logrus"
+	wgdevice "golang.zx2c4.com/wireguard/device"
 	wgnetstack "golang.zx2c4.com/wireguard/tun/netstack"
 
 	"github.com/netbirdio/netbird/client/iface"
@@ -84,6 +85,12 @@ type Options struct {
 	DisableIPv6 bool
 	// BlockInbound blocks all inbound connections from peers
 	BlockInbound bool
+	// BlockLANAccess blocks the embedded peer from reaching the host's
+	// LAN (RFC 1918, link-local, loopback) when it's used as a routing
+	// peer. Mirrors profilemanager.ConfigInput.BlockLANAccess. Useful
+	// when the embedded client must never act as a stepping stone into
+	// the host's local network (e.g. the proxy's overlay peer).
+	BlockLANAccess bool
 	// WireguardPort is the port for the tunnel interface. Use 0 for a random port.
 	WireguardPort *int
 	// MTU is the MTU for the tunnel interface.
@@ -94,6 +101,26 @@ type Options struct {
 	MTU *uint16
 	// DNSLabels defines additional DNS labels configured in the peer.
 	DNSLabels []string
+	// Performance configures the tunnel's buffer pool cap and batch size.
+	Performance Performance
+}
+
+// Performance configures the embedded client's tunnel memory/throughput knobs.
+//
+// These settings are process-global: any non-nil field also becomes the
+// default for Clients constructed by later embed.New calls in the same
+// process. Nil fields are ignored.
+type Performance struct {
+	// PreallocatedBuffersPerPool caps the per-tunnel buffer pool. Zero
+	// leaves the pool unbounded. Lower values trade throughput for a
+	// tighter memory ceiling. May also be changed on a running Client via
+	// Client.SetPerformance, provided this field was nonzero at construction.
+	PreallocatedBuffersPerPool *uint32
+	// MaxBatchSize overrides the number of packets the tunnel reads or
+	// writes per syscall, which also bounds eager buffer allocation per
+	// worker. Zero uses the platform default. Applied at construction
+	// only; ignored by Client.SetPerformance.
+	MaxBatchSize *uint32
 }
 
 // validateCredentials checks that exactly one credential type is provided
@@ -175,6 +202,7 @@ func New(opts Options) (*Client, error) {
 		DisableClientRoutes: &opts.DisableClientRoutes,
 		DisableIPv6:         &opts.DisableIPv6,
 		BlockInbound:        &opts.BlockInbound,
+		BlockLANAccess:      &opts.BlockLANAccess,
 		WireguardPort:       opts.WireguardPort,
 		MTU:                 opts.MTU,
 		DNSLabels:           parsedLabels,
@@ -192,6 +220,13 @@ func New(opts Options) (*Client, error) {
 		config.PrivateKey = opts.PrivateKey
 	}
 
+	if opts.Performance.PreallocatedBuffersPerPool != nil {
+		wgdevice.SetPreallocatedBuffersPerPool(*opts.Performance.PreallocatedBuffersPerPool)
+	}
+	if opts.Performance.MaxBatchSize != nil {
+		wgdevice.SetMaxBatchSizeOverride(*opts.Performance.MaxBatchSize)
+	}
+
 	return &Client{
 		deviceName: opts.DeviceName,
 		setupKey:   opts.SetupKey,
@@ -244,6 +279,10 @@ func (c *Client) Start(startCtx context.Context) error {
 
 	select {
 	case <-startCtx.Done():
+		// Cancel the client context before stopping: Engine.Start blocks on the
+		// signal stream while holding the engine mutex and only unblocks on
+		// cancellation. Stopping first would deadlock on that mutex.
+		cancel()
 		if stopErr := client.Stop(); stopErr != nil {
 			return fmt.Errorf("stop error after context done. Stop error: %w. Context done: %w", stopErr, startCtx.Err())
 		}
@@ -405,6 +444,21 @@ func (c *Client) Expose(ctx context.Context, req ExposeRequest) (*ExposeSession,
 	}, nil
 }
 
+// IdentityForIP looks up a remote peer by its tunnel IP using the
+// embedded client's status recorder. Returns the peer's WireGuard public
+// key and FQDN. ok=false means the IP doesn't belong to an active peer
+// — offline roster peers are treated as unknown, same as foreign IPs.
+func (c *Client) IdentityForIP(ip netip.Addr) (pubKey, fqdn string, ok bool) {
+	if !ip.IsValid() || c.recorder == nil {
+		return "", "", false
+	}
+	state, found := c.recorder.PeerStateByIP(ip.String())
+	if !found {
+		return "", "", false
+	}
+	return state.PubKey, state.FQDN, true
+}
+
 // Status returns the current status of the client.
 func (c *Client) Status() (peer.FullStatus, error) {
 	c.mu.Lock()
@@ -473,6 +527,25 @@ func (c *Client) VerifySSHHostKey(peerAddress string, key []byte) error {
 	return sshcommon.VerifyHostKey(storedKey, key, peerAddress)
 }
 
+// SetPerformance retunes a running Client. Only PreallocatedBuffersPerPool
+// takes effect, and only when it was nonzero at construction;
+// MaxBatchSize is construction-only and returns an error if set here.
+//
+// Returns ErrClientNotStarted / ErrEngineNotStarted if the Client is not
+// running yet.
+func (c *Client) SetPerformance(t Performance) error {
+	if t.MaxBatchSize != nil {
+		return errors.New("MaxBatchSize is construction-only and cannot be changed at runtime")
+	}
+	engine, err := c.getEngine()
+	if err != nil {
+		return err
+	}
+	return engine.SetPerformance(internal.Performance{
+		PreallocatedBuffersPerPool: t.PreallocatedBuffersPerPool,
+	})
+}
+
 // StartCapture begins capturing packets on this client's tunnel device.
 // Only one capture can be active at a time; starting a new one stops the previous.
 // Call StopCapture (or CaptureSession.Stop) to end it.

client/embed/embed_test.go

@@ -0,0 +1,168 @@
+package embed
+
+import (
+	"context"
+	"net"
+	"testing"
+	"time"
+
+	"github.com/golang/mock/gomock"
+	"github.com/stretchr/testify/require"
+	"google.golang.org/grpc"
+
+	"github.com/netbirdio/netbird/management/internals/controllers/network_map/controller"
+	"github.com/netbirdio/netbird/management/internals/controllers/network_map/update_channel"
+	"github.com/netbirdio/netbird/management/internals/modules/peers"
+	"github.com/netbirdio/netbird/management/internals/modules/peers/ephemeral/manager"
+	"github.com/netbirdio/netbird/management/internals/server/config"
+	nbgrpc "github.com/netbirdio/netbird/management/internals/shared/grpc"
+	mgmt "github.com/netbirdio/netbird/management/server"
+	"github.com/netbirdio/netbird/management/server/activity"
+	nbcache "github.com/netbirdio/netbird/management/server/cache"
+	"github.com/netbirdio/netbird/management/server/groups"
+	"github.com/netbirdio/netbird/management/server/integrations/integrated_validator/validator"
+	"github.com/netbirdio/netbird/management/server/integrations/port_forwarding"
+	"github.com/netbirdio/netbird/management/server/job"
+	"github.com/netbirdio/netbird/management/server/permissions"
+	"github.com/netbirdio/netbird/management/server/settings"
+	"github.com/netbirdio/netbird/management/server/store"
+	"github.com/netbirdio/netbird/management/server/telemetry"
+	"github.com/netbirdio/netbird/management/server/types"
+	mgmtProto "github.com/netbirdio/netbird/shared/management/proto"
+	"github.com/netbirdio/netbird/util"
+)
+
+const testSetupKey = "A2C8E62B-38F5-4553-B31E-DD66C696CEBB"
+
+// TestClientStartTimeoutRollback reproduces a deadlock between Engine.Start and
+// Engine.Stop. The signal endpoint accepts gRPC connections but never serves the
+// SignalExchange service, so Engine.Start parks in WaitStreamConnected while
+// holding the engine mutex. When the Start context expires, the rollback path
+// calls ConnectClient.Stop, which must not block forever acquiring that mutex.
+func TestClientStartTimeoutRollback(t *testing.T) {
+	signalAddr := startBlackholeSignal(t)
+	mgmAddr := startManagement(t, signalAddr)
+
+	wgPort := 0
+	client, err := New(Options{
+		DeviceName:    "embed-rollback-test",
+		SetupKey:      testSetupKey,
+		ManagementURL: "http://" + mgmAddr,
+		WireguardPort: &wgPort,
+	})
+	require.NoError(t, err, "embed client creation must succeed")
+
+	startCtx, cancel := context.WithTimeout(context.Background(), 5*time.Second)
+	defer cancel()
+
+	startErr := make(chan error, 1)
+	go func() {
+		startErr <- client.Start(startCtx)
+	}()
+
+	select {
+	case err := <-startErr:
+		require.ErrorIs(t, err, context.DeadlineExceeded)
+	case <-time.After(60 * time.Second):
+		t.Fatal("client.Start did not return after its context expired: Engine.Stop deadlocked against Engine.Start waiting for the signal stream")
+	}
+}
+
+// startBlackholeSignal starts a gRPC server without the SignalExchange service
+// registered. Connections succeed, but the signal stream can never be
+// established, which keeps Engine.Start parked in WaitStreamConnected.
+func startBlackholeSignal(t *testing.T) string {
+	t.Helper()
+
+	lis, err := net.Listen("tcp", "localhost:0")
+	require.NoError(t, err)
+
+	s := grpc.NewServer()
+	go func() {
+		if err := s.Serve(lis); err != nil {
+			t.Error(err)
+		}
+	}()
+	t.Cleanup(s.Stop)
+
+	return lis.Addr().String()
+}
+
+func startManagement(t *testing.T, signalAddr string) string {
+	t.Helper()
+
+	cfg := &config.Config{
+		Stuns:      []*config.Host{},
+		TURNConfig: &config.TURNConfig{},
+		Relay: &config.Relay{
+			Addresses:      []string{"127.0.0.1:1234"},
+			CredentialsTTL: util.Duration{Duration: time.Hour},
+			Secret:         "222222222222222222",
+		},
+		Signal: &config.Host{
+			Proto: "http",
+			URI:   signalAddr,
+		},
+		Datadir:    t.TempDir(),
+		HttpConfig: nil,
+	}
+
+	lis, err := net.Listen("tcp", "localhost:0")
+	require.NoError(t, err)
+
+	s := grpc.NewServer()
+
+	testStore, cleanUp, err := store.NewTestStoreFromSQL(context.Background(), "../testdata/store.sql", cfg.Datadir)
+	require.NoError(t, err)
+	t.Cleanup(cleanUp)
+
+	eventStore := &activity.InMemoryEventStore{}
+
+	permissionsManager := permissions.NewManager(testStore)
+	peersManager := peers.NewManager(testStore, permissionsManager)
+	jobManager := job.NewJobManager(nil, testStore, peersManager)
+
+	cacheStore, err := nbcache.NewStore(context.Background(), 100*time.Millisecond, 300*time.Millisecond, 100)
+	require.NoError(t, err)
+
+	iv, err := validator.NewIntegratedValidator(context.Background(), peersManager, nil, eventStore, cacheStore)
+	require.NoError(t, err)
+	metrics, err := telemetry.NewDefaultAppMetrics(context.Background())
+	require.NoError(t, err)
+
+	ctrl := gomock.NewController(t)
+	t.Cleanup(ctrl.Finish)
+	settingsMockManager := settings.NewMockManager(ctrl)
+	settingsMockManager.EXPECT().
+		GetSettings(gomock.Any(), gomock.Any(), gomock.Any()).
+		Return(&types.Settings{}, nil).
+		AnyTimes()
+	settingsMockManager.EXPECT().
+		GetExtraSettings(gomock.Any(), gomock.Any()).
+		Return(&types.ExtraSettings{}, nil).
+		AnyTimes()
+
+	groupsManager := groups.NewManagerMock()
+
+	updateManager := update_channel.NewPeersUpdateManager(metrics)
+	requestBuffer := mgmt.NewAccountRequestBuffer(context.Background(), testStore)
+	networkMapController := controller.NewController(context.Background(), testStore, metrics, updateManager, requestBuffer, mgmt.MockIntegratedValidator{}, settingsMockManager, "netbird.selfhosted", port_forwarding.NewControllerMock(), manager.NewEphemeralManager(testStore, peersManager), cfg)
+	accountManager, err := mgmt.BuildManager(context.Background(), cfg, testStore, networkMapController, jobManager, nil, "", eventStore, nil, false, iv, metrics, port_forwarding.NewControllerMock(), settingsMockManager, permissionsManager, false, cacheStore)
+	require.NoError(t, err)
+
+	secretsManager, err := nbgrpc.NewTimeBasedAuthSecretsManager(updateManager, cfg.TURNConfig, cfg.Relay, settingsMockManager, groupsManager)
+	require.NoError(t, err)
+
+	mgmtServer, err := nbgrpc.NewServer(cfg, accountManager, settingsMockManager, jobManager, secretsManager, nil, nil, &mgmt.MockIntegratedValidator{}, networkMapController, nil, nil)
+	require.NoError(t, err)
+	mgmtProto.RegisterManagementServiceServer(s, mgmtServer)
+
+	go func() {
+		if err := s.Serve(lis); err != nil {
+			t.Error(err)
+		}
+	}()
+	t.Cleanup(s.Stop)
+
+	return lis.Addr().String()
+}

client/firewall/iptables/acl_linux.go

@@ -3,6 +3,7 @@ package iptables
 import (
 	"errors"
 	"fmt"
+	"maps"
 	"net"
 	"slices"
 
@@ -421,12 +422,17 @@ func (m *aclManager) updateState() {
 	currentState.Lock()
 	defer currentState.Unlock()
 
+	// Clone the maps so the persisted state holds a private snapshot. The
+	// live maps keep being mutated by subsequent rule operations while the
+	// state manager marshals the state from its periodic-save goroutine.
+	// Sharing them by reference races the two and aborts the process with a
+	// concurrent map iteration and write.
 	if m.v6 {
-		currentState.ACLEntries6 = m.entries
-		currentState.ACLIPsetStore6 = m.ipsetStore
+		currentState.ACLEntries6 = maps.Clone(m.entries)
+		currentState.ACLIPsetStore6 = m.ipsetStore.clone()
 	} else {
-		currentState.ACLEntries = m.entries
-		currentState.ACLIPsetStore = m.ipsetStore
+		currentState.ACLEntries = maps.Clone(m.entries)
+		currentState.ACLIPsetStore = m.ipsetStore.clone()
 	}
 
 	if err := m.stateManager.UpdateState(currentState); err != nil {

client/firewall/iptables/router_linux.go

@@ -4,6 +4,7 @@ package iptables
 
 import (
 	"fmt"
+	"maps"
 	"net/netip"
 	"strconv"
 	"strings"
@@ -749,11 +750,17 @@ func (r *router) updateState() {
 	currentState.Lock()
 	defer currentState.Unlock()
 
+	// Clone the rule map so the persisted state holds a private snapshot. The
+	// live map keeps being mutated by subsequent rule operations while the
+	// state manager marshals the state from its periodic-save goroutine.
+	// Sharing it by reference races the two and aborts the process with a
+	// concurrent map iteration and write. The ipset counter guards itself
+	// during marshaling, so it can be shared directly.
 	if r.v6 {
-		currentState.RouteRules6 = r.rules
+		currentState.RouteRules6 = maps.Clone(r.rules)
 		currentState.RouteIPsetCounter6 = r.ipsetCounter
 	} else {
-		currentState.RouteRules = r.rules
+		currentState.RouteRules = maps.Clone(r.rules)
 		currentState.RouteIPsetCounter = r.ipsetCounter
 	}
 

client/firewall/iptables/rulestore_linux.go

@@ -1,6 +1,9 @@
 package iptables
 
-import "encoding/json"
+import (
+	"encoding/json"
+	"maps"
+)
 
 type ipList struct {
 	ips map[string]struct{}
@@ -19,6 +22,14 @@ func (s *ipList) addIP(ip string) {
 	s.ips[ip] = struct{}{}
 }
 
+// clone returns a deep copy of the ipList with its own ips map.
+func (s *ipList) clone() *ipList {
+	if s == nil {
+		return nil
+	}
+	return &ipList{ips: maps.Clone(s.ips)}
+}
+
 // MarshalJSON implements json.Marshaler
 func (s *ipList) MarshalJSON() ([]byte, error) {
 	return json.Marshal(struct {
@@ -55,6 +66,19 @@ func newIpsetStore() *ipsetStore {
 	}
 }
 
+// clone returns a deep copy of the ipsetStore with its own ipsets map and
+// independent ipList entries.
+func (s *ipsetStore) clone() *ipsetStore {
+	if s == nil {
+		return nil
+	}
+	cloned := &ipsetStore{ipsets: make(map[string]*ipList, len(s.ipsets))}
+	for name, list := range s.ipsets {
+		cloned.ipsets[name] = list.clone()
+	}
+	return cloned
+}
+
 func (s *ipsetStore) ipset(ipsetName string) (*ipList, bool) {
 	r, ok := s.ipsets[ipsetName]
 	return r, ok

client/firewall/uspfilter/forwarder/icmp.go

@@ -362,6 +362,10 @@ func (f *Forwarder) injectICMPv6Reply(id stack.TransportEndpointID, icmpPayload
 		return 0
 	}
 
+	if pc := f.endpoint.capture.Load(); pc != nil {
+		(*pc).Offer(fullPacket, true)
+	}
+
 	return len(fullPacket)
 }
 

client/iface/bind/ice_bind.go

@@ -41,7 +41,6 @@ type ICEBind struct {
 	*wgConn.StdNetBind
 
 	transportNet transport.Net
-	filterFn     udpmux.FilterFn
 	address      wgaddr.Address
 	mtu          uint16
 
@@ -61,12 +60,11 @@ type ICEBind struct {
 	ipv6Conn *net.UDPConn
 }
 
-func NewICEBind(transportNet transport.Net, filterFn udpmux.FilterFn, address wgaddr.Address, mtu uint16) *ICEBind {
+func NewICEBind(transportNet transport.Net, address wgaddr.Address, mtu uint16) *ICEBind {
 	b, _ := wgConn.NewStdNetBind().(*wgConn.StdNetBind)
 	ib := &ICEBind{
 		StdNetBind:       b,
 		transportNet:     transportNet,
-		filterFn:         filterFn,
 		address:          address,
 		mtu:              mtu,
 		endpoints:        make(map[netip.Addr]net.Conn),
@@ -265,7 +263,6 @@ func (s *ICEBind) createOrUpdateMux() {
 		udpmux.UniversalUDPMuxParams{
 			UDPConn:   muxConn,
 			Net:       s.transportNet,
-			FilterFn:  s.filterFn,
 			WGAddress: s.address,
 			MTU:       s.mtu,
 		},

client/iface/bind/ice_bind_test.go

@@ -289,7 +289,7 @@ func setupICEBind(t *testing.T) *ICEBind {
 		IP:      netip.MustParseAddr("100.64.0.1"),
 		Network: netip.MustParsePrefix("100.64.0.0/10"),
 	}
-	return NewICEBind(transportNet, nil, address, 1280)
+	return NewICEBind(transportNet, address, 1280)
 }
 
 func createDualStackConns(t *testing.T) (*net.UDPConn, *net.UDPConn) {

client/iface/device/device_filter.go

@@ -1,10 +1,13 @@
 package device
 
 import (
+	"fmt"
 	"net/netip"
+	"runtime/debug"
 	"sync"
 	"sync/atomic"
 
+	log "github.com/sirupsen/logrus"
 	"golang.zx2c4.com/wireguard/tun"
 )
 
@@ -41,10 +44,13 @@ type PacketCapture interface {
 type FilteredDevice struct {
 	tun.Device
 
-	filter    PacketFilter
-	capture   atomic.Pointer[PacketCapture]
-	mutex     sync.RWMutex
-	closeOnce sync.Once
+	filter  PacketFilter
+	capture atomic.Pointer[PacketCapture]
+	// panicHandler is invoked after a panic in the underlying device is
+	// recovered in Read or Write.
+	panicHandler atomic.Pointer[func()]
+	mutex        sync.RWMutex
+	closeOnce    sync.Once
 }
 
 // newDeviceFilter constructor function
@@ -70,7 +76,7 @@ func (d *FilteredDevice) Close() error {
 
 // Read wraps read method with filtering feature
 func (d *FilteredDevice) Read(bufs [][]byte, sizes []int, offset int) (n int, err error) {
-	if n, err = d.Device.Read(bufs, sizes, offset); err != nil {
+	if n, err = d.deviceRead(bufs, sizes, offset); err != nil {
 		return 0, err
 	}
 
@@ -112,7 +118,7 @@ func (d *FilteredDevice) Write(bufs [][]byte, offset int) (int, error) {
 	d.mutex.RUnlock()
 
 	if filter == nil {
-		return d.Device.Write(bufs, offset)
+		return d.deviceWrite(bufs, offset)
 	}
 
 	filteredBufs := make([][]byte, 0, len(bufs))
@@ -125,9 +131,44 @@ func (d *FilteredDevice) Write(bufs [][]byte, offset int) (int, error) {
 		}
 	}
 
-	n, err := d.Device.Write(filteredBufs, offset)
-	n += dropped
-	return n, err
+	n, err := d.deviceWrite(filteredBufs, offset)
+	if err != nil {
+		return n, err
+	}
+	return n + dropped, nil
+}
+
+// deviceRead calls the underlying device Read, recovering from panics in the
+// wintun read path and converting them into errors.
+func (d *FilteredDevice) deviceRead(bufs [][]byte, sizes []int, offset int) (n int, err error) {
+	defer d.recoverFromPanic("read", &n, &err)
+	return d.Device.Read(bufs, sizes, offset)
+}
+
+// deviceWrite calls the underlying device Write, recovering from panics in the
+// wintun write path and converting them into errors.
+func (d *FilteredDevice) deviceWrite(bufs [][]byte, offset int) (n int, err error) {
+	defer d.recoverFromPanic("write", &n, &err)
+	return d.Device.Write(bufs, offset)
+}
+
+// recoverFromPanic converts a panic in the underlying device into a regular
+// error and invokes the registered panic handler. The wintun read path is
+// known to panic on zero-length packets that third-party filter drivers can
+// place in the ring.
+func (d *FilteredDevice) recoverFromPanic(op string, n *int, err *error) {
+	r := recover()
+	if r == nil {
+		return
+	}
+
+	log.Errorf("recovered panic in tun device %s: %v\n%s", op, r, debug.Stack())
+	*n = 0
+	*err = fmt.Errorf("tun device %s panic: %v", op, r)
+
+	if handler := d.panicHandler.Load(); handler != nil {
+		(*handler)()
+	}
 }
 
 // SetFilter sets packet filter to device
@@ -137,6 +178,17 @@ func (d *FilteredDevice) SetFilter(filter PacketFilter) {
 	d.mutex.Unlock()
 }
 
+// SetPanicHandler registers a handler invoked after a recovered panic in Read
+// or Write. The device is unusable after such a panic; the handler should
+// trigger recreation of the interface. Pass nil to remove.
+func (d *FilteredDevice) SetPanicHandler(handler func()) {
+	if handler == nil {
+		d.panicHandler.Store(nil)
+		return
+	}
+	d.panicHandler.Store(&handler)
+}
+
 // SetCapture sets or clears the packet capture sink. Pass nil to disable.
 // Uses atomic store so the hot path (Read/Write) is a single pointer load
 // with no locking overhead when capture is off.

client/iface/device/device_filter_test.go

@@ -221,3 +221,60 @@ func TestDeviceWrapperRead(t *testing.T) {
 		}
 	})
 }
+
+func TestDeviceWrapperReadPanic(t *testing.T) {
+	ctrl := gomock.NewController(t)
+	defer ctrl.Finish()
+
+	tun := mocks.NewMockDevice(ctrl)
+	tun.EXPECT().Read(gomock.Any(), gomock.Any(), gomock.Any()).
+		DoAndReturn(func(bufs [][]byte, sizes []int, offset int) (int, error) {
+			// Reproduce the wintun zero-length packet panic (index out of range).
+			packet := make([]byte, 0)
+			return int(packet[0]), nil
+		})
+
+	wrapped := newDeviceFilter(tun)
+
+	handlerCalled := false
+	wrapped.SetPanicHandler(func() { handlerCalled = true })
+
+	n, err := wrapped.Read([][]byte{{}}, []int{0}, 0)
+	if err == nil {
+		t.Errorf("expected error from recovered panic, got nil")
+	}
+	if n != 0 {
+		t.Errorf("expected n=0, got %d", n)
+	}
+	if !handlerCalled {
+		t.Errorf("expected panic handler to be called")
+	}
+}
+
+func TestDeviceWrapperWritePanic(t *testing.T) {
+	ctrl := gomock.NewController(t)
+	defer ctrl.Finish()
+
+	tun := mocks.NewMockDevice(ctrl)
+	tun.EXPECT().Write(gomock.Any(), gomock.Any()).
+		DoAndReturn(func(bufs [][]byte, offset int) (int, error) {
+			packet := make([]byte, 0)
+			return int(packet[0]), nil
+		})
+
+	wrapped := newDeviceFilter(tun)
+
+	handlerCalled := false
+	wrapped.SetPanicHandler(func() { handlerCalled = true })
+
+	n, err := wrapped.Write([][]byte{{0x45, 0x00}}, 0)
+	if err == nil {
+		t.Errorf("expected error from recovered panic, got nil")
+	}
+	if n != 0 {
+		t.Errorf("expected n=0, got %d", n)
+	}
+	if !handlerCalled {
+		t.Errorf("expected panic handler to be called")
+	}
+}

client/iface/device/device_kernel_unix.go

@@ -32,8 +32,6 @@ type TunKernelDevice struct {
 	link       *wgLink
 	udpMuxConn net.PacketConn
 	udpMux     *udpmux.UniversalUDPMuxDefault
-
-	filterFn udpmux.FilterFn
 }
 
 func NewKernelDevice(name string, address wgaddr.Address, wgPort int, key string, mtu uint16, transportNet transport.Net) *TunKernelDevice {
@@ -104,7 +102,6 @@ func (t *TunKernelDevice) Up() (*udpmux.UniversalUDPMuxDefault, error) {
 	bindParams := udpmux.UniversalUDPMuxParams{
 		UDPConn:   nbnet.WrapPacketConn(rawSock),
 		Net:       t.transportNet,
-		FilterFn:  t.filterFn,
 		WGAddress: t.address,
 		MTU:       t.mtu,
 	}

client/iface/iface.go

@@ -63,7 +63,6 @@ type WGIFaceOpts struct {
 	MTU          uint16
 	MobileArgs   *device.MobileIFaceArguments
 	TransportNet transport.Net
-	FilterFn     udpmux.FilterFn
 	DisableDNS   bool
 }
 

client/iface/iface_new.go

@@ -11,7 +11,7 @@ import (
 
 // NewWGIFace Creates a new WireGuard interface instance
 func NewWGIFace(opts WGIFaceOpts) (*WGIface, error) {
-	iceBind := bind.NewICEBind(opts.TransportNet, opts.FilterFn, opts.Address, opts.MTU)
+	iceBind := bind.NewICEBind(opts.TransportNet, opts.Address, opts.MTU)
 
 	var tun WGTunDevice
 	if netstack.IsEnabled() {

client/iface/iface_new_android.go

@@ -9,7 +9,7 @@ import (
 
 // NewWGIFace Creates a new WireGuard interface instance
 func NewWGIFace(opts WGIFaceOpts) (*WGIface, error) {
-	iceBind := bind.NewICEBind(opts.TransportNet, opts.FilterFn, opts.Address, opts.MTU)
+	iceBind := bind.NewICEBind(opts.TransportNet, opts.Address, opts.MTU)
 
 	if netstack.IsEnabled() {
 		wgIFace := &WGIface{

client/iface/iface_new_ios.go

@@ -10,7 +10,7 @@ import (
 
 // NewWGIFace Creates a new WireGuard interface instance
 func NewWGIFace(opts WGIFaceOpts) (*WGIface, error) {
-	iceBind := bind.NewICEBind(opts.TransportNet, opts.FilterFn, opts.Address, opts.MTU)
+	iceBind := bind.NewICEBind(opts.TransportNet, opts.Address, opts.MTU)
 
 	wgIFace := &WGIface{
 		tun:            device.NewTunDevice(opts.IFaceName, opts.Address, opts.WGPort, opts.WGPrivKey, opts.MTU, iceBind, opts.MobileArgs.TunFd),

client/iface/iface_new_linux.go

@@ -14,7 +14,7 @@ import (
 // NewWGIFace Creates a new WireGuard interface instance
 func NewWGIFace(opts WGIFaceOpts) (*WGIface, error) {
 	if netstack.IsEnabled() {
-		iceBind := bind.NewICEBind(opts.TransportNet, opts.FilterFn, opts.Address, opts.MTU)
+		iceBind := bind.NewICEBind(opts.TransportNet, opts.Address, opts.MTU)
 		return &WGIface{
 			tun:            device.NewNetstackDevice(opts.IFaceName, opts.Address, opts.WGPort, opts.WGPrivKey, opts.MTU, iceBind, netstack.ListenAddr()),
 			userspaceBind:  true,
@@ -30,7 +30,7 @@ func NewWGIFace(opts WGIFaceOpts) (*WGIface, error) {
 	}
 
 	if device.ModuleTunIsLoaded() {
-		iceBind := bind.NewICEBind(opts.TransportNet, opts.FilterFn, opts.Address, opts.MTU)
+		iceBind := bind.NewICEBind(opts.TransportNet, opts.Address, opts.MTU)
 		return &WGIface{
 			tun:            device.NewTunDevice(opts.IFaceName, opts.Address, opts.WGPort, opts.WGPrivKey, opts.MTU, iceBind),
 			userspaceBind:  true,

client/iface/udpmux/universal.go

@@ -8,8 +8,6 @@ import (
 	"context"
 	"fmt"
 	"net"
-	"net/netip"
-	"sync"
 	"time"
 
 	log "github.com/sirupsen/logrus"
@@ -22,10 +20,6 @@ import (
 	"github.com/netbirdio/netbird/client/iface/wgaddr"
 )
 
-// FilterFn is a function that filters out candidates based on the address.
-// If it returns true, the address is to be filtered. It also returns the prefix of matching route.
-type FilterFn func(address netip.Addr) (bool, netip.Prefix, error)
-
 // UniversalUDPMuxDefault handles STUN and TURN servers packets by wrapping the original UDPConn
 // It then passes packets to the UDPMux that does the actual connection muxing.
 type UniversalUDPMuxDefault struct {
@@ -43,7 +37,6 @@ type UniversalUDPMuxParams struct {
 	UDPConn               net.PacketConn
 	XORMappedAddrCacheTTL time.Duration
 	Net                   transport.Net
-	FilterFn              FilterFn
 	WGAddress             wgaddr.Address
 	MTU                   uint16
 }
@@ -68,7 +61,6 @@ func NewUniversalUDPMuxDefault(params UniversalUDPMuxParams) *UniversalUDPMuxDef
 		PacketConn: params.UDPConn,
 		mux:        m,
 		logger:     params.Logger,
-		filterFn:   params.FilterFn,
 		address:    params.WGAddress,
 	}
 
@@ -115,15 +107,12 @@ func (m *UniversalUDPMuxDefault) ReadFromConn(ctx context.Context) {
 	}
 }
 
-// UDPConn is a wrapper around UDPMux conn that overrides ReadFrom and handles STUN/TURN packets
+// UDPConn is a wrapper around UDPMux conn that overrides WriteTo to drop packets destined for the overlay subnet.
 type UDPConn struct {
 	net.PacketConn
-	mux      *UniversalUDPMuxDefault
-	logger   logging.LeveledLogger
-	filterFn FilterFn
-	// TODO: reset cache on route changes
-	addrCache sync.Map
-	address   wgaddr.Address
+	mux     *UniversalUDPMuxDefault
+	logger  logging.LeveledLogger
+	address wgaddr.Address
 }
 
 // GetPacketConn returns the underlying PacketConn
@@ -132,65 +121,16 @@ func (u *UDPConn) GetPacketConn() net.PacketConn {
 }
 
 func (u *UDPConn) WriteTo(b []byte, addr net.Addr) (int, error) {
-	if u.filterFn == nil {
+	udpAddr, ok := addr.(*net.UDPAddr)
+	if !ok {
 		return u.PacketConn.WriteTo(b, addr)
 	}
-
-	if isRouted, found := u.addrCache.Load(addr.String()); found {
-		return u.handleCachedAddress(isRouted.(bool), b, addr)
-	}
-
-	return u.handleUncachedAddress(b, addr)
-}
-
-func (u *UDPConn) handleCachedAddress(isRouted bool, b []byte, addr net.Addr) (int, error) {
-	if isRouted {
-		return 0, fmt.Errorf("address %s is part of a routed network, refusing to write", addr)
-	}
-	return u.PacketConn.WriteTo(b, addr)
-}
-
-func (u *UDPConn) handleUncachedAddress(b []byte, addr net.Addr) (int, error) {
-	if err := u.performFilterCheck(addr); err != nil {
-		return 0, err
-	}
-	return u.PacketConn.WriteTo(b, addr)
-}
-
-func (u *UDPConn) performFilterCheck(addr net.Addr) error {
-	host, err := getHostFromAddr(addr)
-	if err != nil {
-		log.Errorf("Failed to get host from address %s: %v", addr, err)
-		return nil
-	}
-
-	a, err := netip.ParseAddr(host)
-	if err != nil {
-		log.Errorf("Failed to parse address %s: %v", addr, err)
-		return nil
-	}
-
-	if u.address.Network.Contains(a) {
+	dst := udpAddr.AddrPort().Addr().Unmap()
+	if (u.address.Network.IsValid() && u.address.Network.Contains(dst)) || (u.address.IPv6Net.IsValid() && u.address.IPv6Net.Contains(dst)) {
 		log.Warnf("address %s is part of the NetBird network %s, refusing to write", addr, u.address)
-		return fmt.Errorf("address %s is part of the NetBird network %s, refusing to write", addr, u.address)
+		return 0, fmt.Errorf("address %s is part of the NetBird network %s, refusing to write", addr, u.address)
 	}
-
-	if isRouted, prefix, err := u.filterFn(a); err != nil {
-		log.Errorf("Failed to check if address %s is routed: %v", addr, err)
-	} else {
-		u.addrCache.Store(addr.String(), isRouted)
-		if isRouted {
-			// Extra log, as the error only shows up with ICE logging enabled
-			log.Infof("address %s is part of routed network %s, refusing to write", addr, prefix)
-			return fmt.Errorf("address %s is part of routed network %s, refusing to write", addr, prefix)
-		}
-	}
-	return nil
-}
-
-func getHostFromAddr(addr net.Addr) (string, error) {
-	host, _, err := net.SplitHostPort(addr.String())
-	return host, err
+	return u.PacketConn.WriteTo(b, addr)
 }
 
 // GetSharedConn returns the shared udp conn
@@ -225,6 +165,13 @@ func (m *UniversalUDPMuxDefault) HandleSTUNMessage(msg *stun.Message, addr net.A
 		return nil
 	}
 
+	src := udpAddr.AddrPort().Addr().Unmap()
+	wg := m.params.WGAddress
+	if (wg.Network.IsValid() && wg.Network.Contains(src)) || (wg.IPv6Net.IsValid() && wg.IPv6Net.Contains(src)) {
+		log.Debugf("dropping STUN message from overlay source %s", udpAddr)
+		return nil
+	}
+
 	if m.isXORMappedResponse(msg, udpAddr.String()) {
 		err := m.handleXORMappedResponse(udpAddr, msg)
 		if err != nil {

client/iface/wgproxy/proxy_linux_test.go

@@ -66,7 +66,7 @@ func seedProxyForProxyCloseByRemoteConn() ([]proxyInstance, error) {
 	if err != nil {
 		return nil, err
 	}
-	iceBind := bind.NewICEBind(nil, nil, wgAddress, 1280)
+	iceBind := bind.NewICEBind(nil, wgAddress, 1280)
 	endpointAddress := &net.UDPAddr{
 		IP:   net.IPv4(10, 0, 0, 1),
 		Port: 1234,

client/iface/wgproxy/proxy_seed_test.go

@@ -22,7 +22,7 @@ func seedProxyForProxyCloseByRemoteConn() ([]proxyInstance, error) {
 	if err != nil {
 		return nil, err
 	}
-	iceBind := bind.NewICEBind(nil, nil, wgAddress, 1280)
+	iceBind := bind.NewICEBind(nil, wgAddress, 1280)
 	endpointAddress := &net.UDPAddr{
 		IP:   net.IPv4(10, 0, 0, 1),
 		Port: 1234,

client/installer.nsis

@@ -260,23 +260,15 @@ WriteRegStr ${REG_ROOT} "${UNINSTALL_PATH}"  "Publisher" "${COMP_NAME}"
 
 WriteRegStr ${REG_ROOT} "${UI_REG_APP_PATH}" "" "$INSTDIR\${UI_APP_EXE}"
 
-; Drop Run, App Paths and Uninstall entries left in the 32-bit registry view
-; or HKCU by legacy installers.
-DetailPrint "Cleaning legacy 32-bit / HKCU entries..."
-DeleteRegValue HKCU "${AUTOSTART_REG_KEY}" "${APP_NAME}"
-SetRegView 32
-DeleteRegValue HKLM "${AUTOSTART_REG_KEY}" "${APP_NAME}"
-DeleteRegKey HKLM "${REG_APP_PATH}"
-DeleteRegKey HKLM "${UI_REG_APP_PATH}"
-DeleteRegKey HKLM "${UNINSTALL_PATH}"
-SetRegView 64
-
+; Create autostart registry entry based on checkbox
 DetailPrint "Autostart enabled: $AutostartEnabled"
 ${If} $AutostartEnabled == "1"
     WriteRegStr HKLM "${AUTOSTART_REG_KEY}" "${APP_NAME}" '"$INSTDIR\${UI_APP_EXE}.exe"'
     DetailPrint "Added autostart registry entry: $INSTDIR\${UI_APP_EXE}.exe"
 ${Else}
     DeleteRegValue HKLM "${AUTOSTART_REG_KEY}" "${APP_NAME}"
+    ; Legacy: pre-HKLM installs wrote to HKCU; clean that up too.
+    DeleteRegValue HKCU "${AUTOSTART_REG_KEY}" "${APP_NAME}"
     DetailPrint "Autostart not enabled by user"
 ${EndIf}
 
@@ -307,16 +299,11 @@ ExecWait '"$INSTDIR\${MAIN_APP_EXE}" service uninstall'
 DetailPrint "Terminating Netbird UI process..."
 ExecWait `taskkill /im ${UI_APP_EXE}.exe /f`
 
-; Remove autostart entries from every view a previous installer may have used.
+; Remove autostart registry entry
 DetailPrint "Removing autostart registry entry if exists..."
 DeleteRegValue HKLM "${AUTOSTART_REG_KEY}" "${APP_NAME}"
+; Legacy: pre-HKLM installs wrote to HKCU; clean that up too.
 DeleteRegValue HKCU "${AUTOSTART_REG_KEY}" "${APP_NAME}"
-SetRegView 32
-DeleteRegValue HKLM "${AUTOSTART_REG_KEY}" "${APP_NAME}"
-DeleteRegKey HKLM "${REG_APP_PATH}"
-DeleteRegKey HKLM "${UI_REG_APP_PATH}"
-DeleteRegKey HKLM "${UNINSTALL_PATH}"
-SetRegView 64
 
 ; Handle data deletion based on checkbox
 DetailPrint "Checking if user requested data deletion..."

client/internal/auth/pkce_flow.go

@@ -360,7 +360,13 @@ func isRedirectURLPortUsed(redirectURL string, excludedRanges []excludedPortRang
 		return true
 	}
 
-	addr := fmt.Sprintf(":%s", port)
+	// FreeBSD 15 disables connecting to INADDR_ANY (0.0.0.0) as a localhost
+	// alias by default, ensure explicit ip for localhost.
+	host := parsedURL.Hostname()
+	if host == "" {
+		host = "127.0.0.1"
+	}
+	addr := net.JoinHostPort(host, port)
 	conn, err := net.DialTimeout("tcp", addr, 3*time.Second)
 	if err != nil {
 		return false

client/internal/connect.go

@@ -6,6 +6,7 @@ import (
 	"fmt"
 	"net"
 	"net/netip"
+	"path/filepath"
 	"runtime"
 	"runtime/debug"
 	"strings"
@@ -117,6 +118,8 @@ func (c *ConnectClient) RunOniOS(
 	networkChangeListener listener.NetworkChangeListener,
 	dnsManager dns.IosDnsManager,
 	stateFilePath string,
+	cacheDir string,
+	logFilePath string,
 ) error {
 	// Set GC percent to 5% to reduce memory usage as iOS only allows 50MB of memory for the extension.
 	debug.SetGCPercent(5)
@@ -126,8 +129,9 @@ func (c *ConnectClient) RunOniOS(
 		NetworkChangeListener: networkChangeListener,
 		DnsManager:            dnsManager,
 		StateFilePath:         stateFilePath,
+		TempDir:               cacheDir,
 	}
-	return c.run(mobileDependency, nil, "")
+	return c.run(mobileDependency, nil, logFilePath)
 }
 
 func (c *ConnectClient) run(mobileDependency MobileDependency, runningChan chan struct{}, logPath string) error {
@@ -346,6 +350,11 @@ func (c *ConnectClient) run(mobileDependency MobileDependency, runningChan chan
 			return wrapErr(err)
 		}
 		engineConfig.TempDir = mobileDependency.TempDir
+		// Leave StateDir empty when there is no state path so a disk-backed
+		// syncstore falls back to os.TempDir() instead of filepath.Dir("") == ".".
+		if path != "" {
+			engineConfig.StateDir = filepath.Dir(path)
+		}
 
 		relayManager := relayClient.NewManager(engineCtx, relayURLs, myPrivateKey.PublicKey().String(), engineConfig.MTU)
 		c.statusRecorder.SetRelayMgr(relayManager)

client/internal/debug/debug.go

@@ -250,10 +250,13 @@ type BundleGenerator struct {
 	syncResponse   *mgmProto.SyncResponse
 	logPath        string
 	tempDir        string
+	statePath      string
 	cpuProfile     []byte
 	capturePath    string
 	refreshStatus  func() // Optional callback to refresh status before bundle generation
 	clientMetrics  MetricsExporter
+	daemonVersion  string
+	cliVersion     string
 
 	anonymize         bool
 	includeSystemInfo bool
@@ -274,10 +277,13 @@ type GeneratorDependencies struct {
 	SyncResponse   *mgmProto.SyncResponse
 	LogPath        string
 	TempDir        string // Directory for temporary bundle zip files. If empty, os.TempDir() is used.
+	StatePath      string // Path to the state file. If empty, the ServiceManager default path is used.
 	CPUProfile     []byte
 	CapturePath    string
 	RefreshStatus  func()
 	ClientMetrics  MetricsExporter
+	DaemonVersion  string
+	CliVersion     string
 }
 
 func NewBundleGenerator(deps GeneratorDependencies, cfg BundleConfig) *BundleGenerator {
@@ -295,10 +301,13 @@ func NewBundleGenerator(deps GeneratorDependencies, cfg BundleConfig) *BundleGen
 		syncResponse:   deps.SyncResponse,
 		logPath:        deps.LogPath,
 		tempDir:        deps.TempDir,
+		statePath:      deps.StatePath,
 		cpuProfile:     deps.CPUProfile,
 		capturePath:    deps.CapturePath,
 		refreshStatus:  deps.RefreshStatus,
 		clientMetrics:  deps.ClientMetrics,
+		daemonVersion:  deps.DaemonVersion,
+		cliVersion:     deps.CliVersion,
 
 		anonymize:         cfg.Anonymize,
 		includeSystemInfo: cfg.IncludeSystemInfo,
@@ -459,9 +468,11 @@ func (g *BundleGenerator) addStatus() error {
 		protoFullStatus := nbstatus.ToProtoFullStatus(fullStatus)
 		protoFullStatus.Events = g.statusRecorder.GetEventHistory()
 		overview := nbstatus.ConvertToStatusOutputOverview(protoFullStatus, nbstatus.ConvertOptions{
-			Anonymize:   g.anonymize,
-			ProfileName: profName,
+			Anonymize:     g.anonymize,
+			ProfileName:   profName,
+			DaemonVersion: g.daemonVersion,
 		})
+		overview.CliVersion = g.cliVersion
 		statusOutput := overview.FullDetailSummary()
 
 		statusReader := strings.NewReader(statusOutput)
@@ -508,6 +519,14 @@ func (g *BundleGenerator) addConfig() error {
 		}
 	}
 
+	// Surface the set of MDM-enforced keys so a support engineer reading
+	// the bundle can tell which field values are user-set vs MDM-overridden.
+	// Same semantics as the mDMManagedFields list returned by the
+	// GetConfig RPC consumed by `netbird debug config`.
+	if managed := g.internalConfig.Policy().ManagedKeys(); len(managed) > 0 {
+		configContent.WriteString(fmt.Sprintf("MDMManagedFields: %v\n", managed))
+	}
+
 	configReader := strings.NewReader(configContent.String())
 	if err := g.addFileToZip(configReader, "config.txt"); err != nil {
 		return fmt.Errorf("add config file to zip: %w", err)
@@ -798,6 +817,8 @@ func (g *BundleGenerator) addSyncResponse() error {
 		AllowPartial:    true,
 	}
 
+	g.maskSecrets()
+
 	jsonBytes, err := options.Marshal(g.syncResponse)
 	if err != nil {
 		return fmt.Errorf("generate json: %w", err)
@@ -810,9 +831,33 @@ func (g *BundleGenerator) addSyncResponse() error {
 	return nil
 }
 
+func (g *BundleGenerator) maskSecrets() {
+	if g.syncResponse == nil || g.syncResponse.NetbirdConfig == nil {
+		return
+	}
+
+	if g.syncResponse.NetbirdConfig.Flow != nil {
+		g.syncResponse.NetbirdConfig.Flow.TokenPayload = maskedValue
+
+	}
+
+	if g.syncResponse.NetbirdConfig.Relay != nil {
+		g.syncResponse.NetbirdConfig.Relay.TokenPayload = maskedValue
+	}
+
+	for i := range g.syncResponse.NetbirdConfig.Turns {
+		if g.syncResponse.NetbirdConfig.Turns[i] != nil {
+			g.syncResponse.NetbirdConfig.Turns[i].Password = maskedValue
+		}
+	}
+}
+
 func (g *BundleGenerator) addStateFile() error {
-	sm := profilemanager.NewServiceManager("")
-	path := sm.GetStatePath()
+	path := g.statePath
+	if path == "" {
+		sm := profilemanager.NewServiceManager("")
+		path = sm.GetStatePath()
+	}
 	if path == "" {
 		return nil
 	}
@@ -1039,7 +1084,8 @@ func (g *BundleGenerator) addRotatedLogFiles(logDir string) {
 		return
 	}
 
-	pattern := filepath.Join(logDir, "client-*.log.gz")
+	// This regex will match both logs rotated by us and logrotate on linux
+	pattern := filepath.Join(logDir, "client*.log.*")
 	files, err := filepath.Glob(pattern)
 	if err != nil {
 		log.Warnf("failed to glob rotated logs: %v", err)
@@ -1072,7 +1118,12 @@ func (g *BundleGenerator) addRotatedLogFiles(logDir string) {
 
 	for i := 0; i < maxFiles; i++ {
 		name := filepath.Base(files[i])
-		if err := g.addSingleLogFileGz(files[i], name); err != nil {
+		if strings.HasSuffix(name, ".gz") {
+			err = g.addSingleLogFileGz(files[i], name)
+		} else {
+			err = g.addSingleLogfile(files[i], name)
+		}
+		if err != nil {
 			log.Warnf("failed to add rotated log %s: %v", name, err)
 		}
 	}

client/internal/debug/debug_ios.go

@@ -0,0 +1,36 @@
+//go:build ios
+
+package debug
+
+import (
+	"path/filepath"
+
+	log "github.com/sirupsen/logrus"
+)
+
+// swiftLogFile is the Swift app log written by the iOS app into the same log
+// directory as the Go client log, so it can be collected into the bundle.
+const swiftLogFile = "swift-log.log"
+
+// addPlatformLog collects logs for the iOS debug bundle. iOS has no logcat or
+// systemd journal, so we rely on file-based logs. addLogfile handles the Go
+// client log (logPath) with rotation, the stderr/stdout companions and
+// anonymization. The iOS app writes its own Swift log into the same directory,
+// so we add it alongside the Go log.
+func (g *BundleGenerator) addPlatformLog() error {
+	if err := g.addLogfile(); err != nil {
+		return err
+	}
+
+	if g.logPath == "" {
+		return nil
+	}
+
+	swiftLogPath := filepath.Join(filepath.Dir(g.logPath), swiftLogFile)
+	if err := g.addSingleLogfile(swiftLogPath, swiftLogFile); err != nil {
+		// The Swift log is best-effort: the app may not have written it yet.
+		log.Warnf("failed to add %s to debug bundle: %v", swiftLogFile, err)
+	}
+
+	return nil
+}

client/internal/debug/debug_logfiles_test.go

@@ -0,0 +1,103 @@
+package debug
+
+import (
+	"archive/zip"
+	"bytes"
+	"compress/gzip"
+	"io"
+	"os"
+	"path/filepath"
+	"testing"
+	"time"
+
+	"github.com/stretchr/testify/require"
+)
+
+// TestAddRotatedLogFiles_PicksUpAllVariants asserts that the rotated-log
+// glob picks up logs rotated by timberjack (gzipped) and by logrotate (plain
+// and gzipped), and skips unrelated files.
+func TestAddRotatedLogFiles_PicksUpAllVariants(t *testing.T) {
+	dir := t.TempDir()
+
+	writeFile(t, filepath.Join(dir, "client.log"), "active log\n")
+	writeFile(t, filepath.Join(dir, "other.log"), "unrelated\n")
+
+	timberjackRotated := "client-2026-05-21T10-30-45.000.log.gz"
+	writeGzFile(t, filepath.Join(dir, timberjackRotated), "timberjack rotated content\n")
+
+	logrotatePlain := "client.log.1"
+	writeFile(t, filepath.Join(dir, logrotatePlain), "logrotate plain content\n")
+
+	logrotateGz := "client.log.2.gz"
+	writeGzFile(t, filepath.Join(dir, logrotateGz), "logrotate gz content\n")
+
+	names := runAddRotatedLogFiles(t, dir, 10)
+
+	require.Contains(t, names, timberjackRotated, "timberjack rotated file should be in bundle")
+	require.Contains(t, names, logrotatePlain, "logrotate plain rotated file should be in bundle")
+	require.Contains(t, names, logrotateGz, "logrotate gzipped rotated file should be in bundle")
+	require.NotContains(t, names, "client.log", "active log should not be added by addRotatedLogFiles")
+	require.NotContains(t, names, "other.log", "unrelated files should not be in bundle")
+}
+
+// TestAddRotatedLogFiles_RespectsLogFileCount asserts that only the newest
+// logFileCount rotated files are bundled, ordered by mtime.
+func TestAddRotatedLogFiles_RespectsLogFileCount(t *testing.T) {
+	dir := t.TempDir()
+
+	oldest := filepath.Join(dir, "client.log.3")
+	middle := filepath.Join(dir, "client.log.2")
+	newest := filepath.Join(dir, "client.log.1")
+	writeFile(t, oldest, "old\n")
+	writeFile(t, middle, "mid\n")
+	writeFile(t, newest, "new\n")
+
+	now := time.Now()
+	require.NoError(t, os.Chtimes(oldest, now.Add(-2*time.Hour), now.Add(-2*time.Hour)))
+	require.NoError(t, os.Chtimes(middle, now.Add(-1*time.Hour), now.Add(-1*time.Hour)))
+	require.NoError(t, os.Chtimes(newest, now, now))
+
+	names := runAddRotatedLogFiles(t, dir, 2)
+
+	require.Contains(t, names, "client.log.1")
+	require.Contains(t, names, "client.log.2")
+	require.NotContains(t, names, "client.log.3", "oldest file should be dropped when logFileCount=2")
+}
+
+// runAddRotatedLogFiles calls addRotatedLogFiles against a fresh in-memory
+// zip writer and returns the set of entry names that ended up in the archive.
+func runAddRotatedLogFiles(t *testing.T, dir string, logFileCount uint32) map[string]struct{} {
+	t.Helper()
+
+	var buf bytes.Buffer
+	g := &BundleGenerator{
+		archive:      zip.NewWriter(&buf),
+		logFileCount: logFileCount,
+	}
+	g.addRotatedLogFiles(dir)
+	require.NoError(t, g.archive.Close())
+
+	zr, err := zip.NewReader(bytes.NewReader(buf.Bytes()), int64(buf.Len()))
+	require.NoError(t, err)
+
+	names := make(map[string]struct{}, len(zr.File))
+	for _, f := range zr.File {
+		names[f.Name] = struct{}{}
+	}
+	return names
+}
+
+func writeFile(t *testing.T, path, content string) {
+	t.Helper()
+	require.NoError(t, os.WriteFile(path, []byte(content), 0o644))
+}
+
+func writeGzFile(t *testing.T, path, content string) {
+	t.Helper()
+	var buf bytes.Buffer
+	gw := gzip.NewWriter(&buf)
+	_, err := io.WriteString(gw, content)
+	require.NoError(t, err)
+	require.NoError(t, gw.Close())
+	require.NoError(t, os.WriteFile(path, buf.Bytes(), 0o644))
+}

client/internal/debug/debug_nonandroid.go

@@ -1,4 +1,4 @@
-//go:build !android
+//go:build !android && !ios
 
 package debug
 

client/internal/debug/debug_test.go

@@ -843,6 +843,8 @@ func TestAddConfig_AllFieldsCovered(t *testing.T) {
 		"PreSharedKey":      "sensitive: WireGuard pre-shared key",
 		"SSHKey":            "sensitive: SSH private key",
 		"ClientCertKeyPair": "non-config: parsed cert pair, not serialized",
+		"Name":              "non-config: profile name is not needed for debug purposes",
+		"policy":            "non-config: in-memory MDM policy snapshot, surfaced via Config.Policy() / GetConfigResponse.MDMManagedFields",
 	}
 
 	mURL, _ := url.Parse("https://api.example.com:443")

client/internal/dns/handler_chain.go

@@ -339,8 +339,7 @@ func (c *HandlerChain) isHandlerMatch(qname string, entry HandlerEntry) bool {
 	case entry.Pattern == ".":
 		return true
 	case entry.IsWildcard:
-		parts := strings.Split(strings.TrimSuffix(qname, entry.Pattern), ".")
-		return len(parts) >= 2 && strings.HasSuffix(qname, entry.Pattern)
+		return strings.HasSuffix(qname, "."+entry.Pattern)
 	default:
 		// For non-wildcard patterns:
 		// If handler wants subdomain matching, allow suffix match

client/internal/dns/handler_chain_test.go

@@ -164,6 +164,54 @@ func TestHandlerChain_ServeDNS_DomainMatching(t *testing.T) {
 			matchSubdomains: true,
 			shouldMatch:     true,
 		},
+		{
+			name:            "wildcard label-boundary mismatch (suffix overlap)",
+			handlerDomain:   "*.b.test.",
+			queryDomain:     "x.ab.test.",
+			isWildcard:      true,
+			matchSubdomains: false,
+			shouldMatch:     false,
+		},
+		{
+			name:            "wildcard label-boundary match",
+			handlerDomain:   "*.b.test.",
+			queryDomain:     "x.b.test.",
+			isWildcard:      true,
+			matchSubdomains: false,
+			shouldMatch:     true,
+		},
+		{
+			name:            "wildcard multi-label match",
+			handlerDomain:   "*.b.test.",
+			queryDomain:     "x.y.b.test.",
+			isWildcard:      true,
+			matchSubdomains: false,
+			shouldMatch:     true,
+		},
+		{
+			name:            "wildcard no match on multi-label apex",
+			handlerDomain:   "*.b.test.",
+			queryDomain:     "b.test.",
+			isWildcard:      true,
+			matchSubdomains: false,
+			shouldMatch:     false,
+		},
+		{
+			name:            "wildcard no match on unrelated suffix containment",
+			handlerDomain:   "*.example.com.",
+			queryDomain:     "notexample.com.",
+			isWildcard:      true,
+			matchSubdomains: false,
+			shouldMatch:     false,
+		},
+		{
+			name:            "wildcard accepts pattern registered without trailing dot",
+			handlerDomain:   "*.b.test",
+			queryDomain:     "x.b.test.",
+			isWildcard:      true,
+			matchSubdomains: false,
+			shouldMatch:     true,
+		},
 	}
 
 	for _, tt := range tests {
@@ -273,6 +321,19 @@ func TestHandlerChain_ServeDNS_OverlappingDomains(t *testing.T) {
 			expectedCalls:   1,
 			expectedHandler: 2, // highest priority matching handler should be called
 		},
+		{
+			name: "overlapping wildcard suffixes route to correct handler",
+			handlers: []struct {
+				pattern  string
+				priority int
+			}{
+				{pattern: "*.b.test.", priority: nbdns.PriorityDNSRoute},
+				{pattern: "*.ab.test.", priority: nbdns.PriorityDNSRoute},
+			},
+			queryDomain:     "app.ab.test.",
+			expectedCalls:   1,
+			expectedHandler: 1,
+		},
 		{
 			name: "root zone with specific domain",
 			handlers: []struct {

client/internal/dns/local/local.go

@@ -26,6 +26,19 @@ type resolver interface {
 	LookupNetIP(ctx context.Context, network, host string) ([]netip.Addr, error)
 }
 
+// PeerConnectivity reports whether a tunnel IP belongs to a peer the
+// client knows about and whether that peer is currently connected. The
+// local resolver uses this to suppress A/AAAA answers whose RDATA points
+// at a disconnected peer (typical case: a synthesized private-service
+// record pointing at an embedded proxy peer that just went offline).
+//
+// known=false means the IP isn't in the local peerstore at all — the
+// record is left alone (it points at something outside our mesh, e.g.
+// a non-peer upstream).
+type PeerConnectivity interface {
+	IsConnectedByIP(ip string) (known, connected bool)
+}
+
 type Resolver struct {
 	mu      sync.RWMutex
 	records map[dns.Question][]dns.RR
@@ -33,6 +46,11 @@ type Resolver struct {
 	// zones maps zone domain -> NonAuthoritative (true = non-authoritative, user-created zone)
 	zones    map[domain.Domain]bool
 	resolver resolver
+	// peerConn, when non-nil, is consulted on every A/AAAA answer to
+	// drop records pointing at disconnected peers. nil disables the
+	// filter and preserves the legacy "return whatever is registered"
+	// behaviour for callers that never wire a status source.
+	peerConn PeerConnectivity
 
 	ctx    context.Context
 	cancel context.CancelFunc
@@ -49,6 +67,15 @@ func NewResolver() *Resolver {
 	}
 }
 
+// SetPeerConnectivity wires the per-IP connectivity check used to filter
+// out A/AAAA answers pointing at disconnected peers. Pass nil to disable.
+// Safe to call multiple times; the latest value wins.
+func (d *Resolver) SetPeerConnectivity(p PeerConnectivity) {
+	d.mu.Lock()
+	defer d.mu.Unlock()
+	d.peerConn = p
+}
+
 func (d *Resolver) MatchSubdomains() bool {
 	return true
 }
@@ -95,6 +122,7 @@ func (d *Resolver) ServeDNS(w dns.ResponseWriter, r *dns.Msg) {
 	replyMessage.RecursionAvailable = true
 
 	result := d.lookupRecords(logger, question)
+	result.records = d.filterDisconnectedPeerAnswers(logger, question, result.records)
 	replyMessage.Authoritative = !result.hasExternalData
 	replyMessage.Answer = result.records
 	replyMessage.Rcode = d.determineRcode(question, result)
@@ -436,6 +464,78 @@ func (d *Resolver) logDNSError(logger *log.Entry, hostname string, qtype uint16,
 	}
 }
 
+// filterDisconnectedPeerAnswers drops A/AAAA records whose RDATA matches
+// a known but disconnected peer. The synthesized private-service zones
+// emit one A record per connected proxy peer in a cluster; when a peer
+// goes offline, the server-side refresh removes the record from the
+// next netmap, but the client may still hold the previous netmap for a
+// short window. This filter is the local belt to that braces — even on
+// the stale netmap, the resolver hides the offline target.
+//
+// Records pointing at unknown IPs (outside the local peerstore, e.g.
+// non-mesh upstreams) are never dropped. Non-A/AAAA records pass
+// through untouched.
+//
+// Escape hatch: if filtering would leave the answer empty AND at least
+// one record was filtered, the original list is returned. Better to
+// hand the client a record that may not respond than NXDOMAIN it
+// completely when every proxy peer is offline (the upstream may still
+// be reachable some other way, or the peerstore may be stale).
+func (d *Resolver) filterDisconnectedPeerAnswers(logger *log.Entry, question dns.Question, records []dns.RR) []dns.RR {
+	if len(records) < 2 {
+		return records
+	}
+	d.mu.RLock()
+	checker := d.peerConn
+	d.mu.RUnlock()
+	if checker == nil {
+		return records
+	}
+
+	kept := make([]dns.RR, 0, len(records))
+	var dropped int
+	for _, rr := range records {
+		ip := extractRecordIP(rr)
+		if ip == "" {
+			kept = append(kept, rr)
+			continue
+		}
+		known, connected := checker.IsConnectedByIP(ip)
+		if known && !connected {
+			dropped++
+			continue
+		}
+		kept = append(kept, rr)
+	}
+	if dropped == 0 {
+		return records
+	}
+	if len(kept) == 0 {
+		logger.Debugf("all %d answers for %s point at disconnected peers; returning the original list", dropped, question.Name)
+		return records
+	}
+	logger.Tracef("dropped %d disconnected-peer answer(s) for %s, returning %d", dropped, question.Name, len(kept))
+	return kept
+}
+
+// extractRecordIP returns the dotted-decimal / colon-hex IP carried by
+// an A or AAAA record, or "" for any other record type.
+func extractRecordIP(rr dns.RR) string {
+	switch r := rr.(type) {
+	case *dns.A:
+		if r.A == nil {
+			return ""
+		}
+		return r.A.String()
+	case *dns.AAAA:
+		if r.AAAA == nil {
+			return ""
+		}
+		return r.AAAA.String()
+	}
+	return ""
+}
+
 // Update replaces all zones and their records
 func (d *Resolver) Update(customZones []nbdns.CustomZone) {
 	d.mu.Lock()

client/internal/dns/local/local_test.go

@@ -30,6 +30,21 @@ func (m *mockResolver) LookupNetIP(ctx context.Context, network, host string) ([
 	return nil, nil
 }
 
+// mockPeerConnectivity returns canned (known, connected) results per IP.
+// Used by the disconnected-peer filter tests below. IPs not in the map
+// are reported as unknown so the filter leaves them alone.
+type mockPeerConnectivity struct {
+	byIP map[string]struct{ known, connected bool }
+}
+
+func (m mockPeerConnectivity) IsConnectedByIP(ip string) (known, connected bool) {
+	v, ok := m.byIP[ip]
+	if !ok {
+		return false, false
+	}
+	return v.known, v.connected
+}
+
 func TestLocalResolver_ServeDNS(t *testing.T) {
 	recordA := nbdns.SimpleRecord{
 		Name:  "peera.netbird.cloud.",
@@ -2652,3 +2667,125 @@ func BenchmarkIsInManagedZone_ManyZones(b *testing.B) {
 		resolver.isInManagedZone(qname)
 	}
 }
+
+// TestLocalResolver_FilterDisconnectedPeerAnswers verifies the
+// connectivity-aware filtering layered on top of lookupRecords:
+// when an A record's IP belongs to a known peer that's disconnected,
+// the record is dropped from the answer. Records for unknown IPs pass
+// through. If filtering would empty the answer entirely and at least
+// one record was dropped, the original list is restored (escape hatch
+// for the "all proxies offline" case).
+func TestLocalResolver_FilterDisconnectedPeerAnswers(t *testing.T) {
+	zone := "svc.cluster.netbird."
+	connectedRec := nbdns.SimpleRecord{
+		Name:  zone,
+		Type:  int(dns.TypeA),
+		Class: nbdns.DefaultClass,
+		TTL:   5,
+		RData: "100.64.0.10",
+	}
+	disconnectedRec := nbdns.SimpleRecord{
+		Name:  zone,
+		Type:  int(dns.TypeA),
+		Class: nbdns.DefaultClass,
+		TTL:   5,
+		RData: "100.64.0.11",
+	}
+	unknownRec := nbdns.SimpleRecord{
+		Name:  zone,
+		Type:  int(dns.TypeA),
+		Class: nbdns.DefaultClass,
+		TTL:   5,
+		RData: "203.0.113.5",
+	}
+
+	type ipState struct{ known, connected bool }
+	tests := []struct {
+		name        string
+		records     []nbdns.SimpleRecord
+		connByIP    map[string]ipState
+		wantInOrder []string
+	}{
+		{
+			name:    "drops disconnected peer, keeps connected",
+			records: []nbdns.SimpleRecord{connectedRec, disconnectedRec},
+			connByIP: map[string]ipState{
+				"100.64.0.10": {known: true, connected: true},
+				"100.64.0.11": {known: true, connected: false},
+			},
+			wantInOrder: []string{"100.64.0.10"},
+		},
+		{
+			name:    "unknown IPs pass through untouched",
+			records: []nbdns.SimpleRecord{unknownRec, disconnectedRec},
+			connByIP: map[string]ipState{
+				"100.64.0.11": {known: true, connected: false},
+			},
+			wantInOrder: []string{"203.0.113.5"},
+		},
+		{
+			name:    "all disconnected falls back to original list",
+			records: []nbdns.SimpleRecord{disconnectedRec, connectedRec},
+			connByIP: map[string]ipState{
+				"100.64.0.10": {known: true, connected: false},
+				"100.64.0.11": {known: true, connected: false},
+			},
+			wantInOrder: []string{"100.64.0.11", "100.64.0.10"},
+		},
+		{
+			name:        "no checker wired returns all records",
+			records:     []nbdns.SimpleRecord{connectedRec, disconnectedRec},
+			connByIP:    nil,
+			wantInOrder: []string{"100.64.0.10", "100.64.0.11"},
+		},
+		{
+			// A single answer is never filtered: dropping it would only
+			// trigger the empty-answer escape hatch, so the fast path
+			// returns it untouched.
+			name:    "single disconnected answer passes through",
+			records: []nbdns.SimpleRecord{disconnectedRec},
+			connByIP: map[string]ipState{
+				"100.64.0.11": {known: true, connected: false},
+			},
+			wantInOrder: []string{"100.64.0.11"},
+		},
+	}
+
+	for _, tc := range tests {
+		t.Run(tc.name, func(t *testing.T) {
+			resolver := NewResolver()
+			if tc.connByIP != nil {
+				cm := mockPeerConnectivity{byIP: make(map[string]struct{ known, connected bool }, len(tc.connByIP))}
+				for ip, st := range tc.connByIP {
+					cm.byIP[ip] = struct{ known, connected bool }{st.known, st.connected}
+				}
+				resolver.SetPeerConnectivity(cm)
+			}
+			resolver.Update([]nbdns.CustomZone{{
+				Domain:           strings.TrimSuffix(zone, "."),
+				Records:          tc.records,
+				NonAuthoritative: true,
+			}})
+
+			var got *dns.Msg
+			writer := &test.MockResponseWriter{
+				WriteMsgFunc: func(m *dns.Msg) error {
+					got = m
+					return nil
+				},
+			}
+			req := new(dns.Msg).SetQuestion(zone, dns.TypeA)
+			resolver.ServeDNS(writer, req)
+
+			require.NotNil(t, got, "resolver must produce a response")
+			require.Len(t, got.Answer, len(tc.wantInOrder),
+				"answer count must match expected: %v", tc.wantInOrder)
+			for i, want := range tc.wantInOrder {
+				a, ok := got.Answer[i].(*dns.A)
+				require.True(t, ok, "answer[%d] must be an A record", i)
+				assert.Equal(t, want, a.A.String(),
+					"answer[%d] expected %s got %s", i, want, a.A.String())
+			}
+		})
+	}
+}

client/internal/dns/resutil/resolve.go

@@ -14,6 +14,10 @@ import (
 	log "github.com/sirupsen/logrus"
 )
 
+// errNoSuitableAddress mirrors the unexported error string the net package
+// uses when a resolved host has no addresses of the requested family.
+const errNoSuitableAddress = "no suitable address found"
+
 // GenerateRequestID creates a random 8-character hex string for request tracing.
 func GenerateRequestID() string {
 	bytes := make([]byte, 4)
@@ -126,6 +130,14 @@ func LookupIP(ctx context.Context, r resolver, network, host string, qtype uint1
 }
 
 func getRcodeForError(ctx context.Context, r resolver, host string, qtype uint16, err error) int {
+	// The net package returns this AddrError when the host resolves but has
+	// no addresses of the requested family. The domain exists, so answer
+	// NODATA instead of SERVFAIL.
+	var addrErr *net.AddrError
+	if errors.As(err, &addrErr) && addrErr.Err == errNoSuitableAddress {
+		return dns.RcodeSuccess
+	}
+
 	var dnsErr *net.DNSError
 	if !errors.As(err, &dnsErr) {
 		return dns.RcodeServerFailure

client/internal/dns/resutil/resolve_test.go

@@ -0,0 +1,122 @@
+package resutil
+
+import (
+	"context"
+	"errors"
+	"net"
+	"net/netip"
+	"testing"
+
+	"github.com/miekg/dns"
+	"github.com/stretchr/testify/assert"
+	"github.com/stretchr/testify/require"
+)
+
+type mockResolver struct {
+	// results maps network ("ip4"/"ip6") to the lookup outcome.
+	results map[string]mockLookup
+}
+
+type mockLookup struct {
+	ips []netip.Addr
+	err error
+}
+
+func (m *mockResolver) LookupNetIP(_ context.Context, network, _ string) ([]netip.Addr, error) {
+	res, ok := m.results[network]
+	if !ok {
+		return nil, errors.New("unexpected network: " + network)
+	}
+	return res.ips, res.err
+}
+
+func TestLookupIP_Success(t *testing.T) {
+	r := &mockResolver{results: map[string]mockLookup{
+		"ip4": {ips: []netip.Addr{netip.MustParseAddr("::ffff:192.0.2.1")}},
+	}}
+
+	result := LookupIP(context.Background(), r, "ip4", "example.com.", dns.TypeA)
+
+	assert.Equal(t, dns.RcodeSuccess, result.Rcode, "successful lookup should return NOERROR")
+	require.Len(t, result.IPs, 1, "should return the resolved address")
+	assert.Equal(t, netip.MustParseAddr("192.0.2.1"), result.IPs[0], "v4-mapped address should be unmapped")
+}
+
+func TestLookupIP_NoSuitableAddress(t *testing.T) {
+	// The net package returns this AddrError when the host resolves but has
+	// no addresses of the requested family (e.g. AAAA query for a v4-only
+	// hosts file entry). The domain exists, so this is NODATA, not SERVFAIL.
+	r := &mockResolver{results: map[string]mockLookup{
+		"ip6": {err: &net.AddrError{Err: "no suitable address found", Addr: "example.com."}},
+	}}
+
+	result := LookupIP(context.Background(), r, "ip6", "example.com.", dns.TypeAAAA)
+
+	assert.Equal(t, dns.RcodeSuccess, result.Rcode, "no suitable address should map to NODATA")
+	assert.Empty(t, result.IPs, "NODATA response should carry no addresses")
+}
+
+// TestErrNoSuitableAddressMatchesNetPackage pins our copy of the error string
+// to what the net package actually emits. A literal IP of the wrong family
+// takes the same filterAddrList path as a resolved hostname, without network
+// access.
+func TestErrNoSuitableAddressMatchesNetPackage(t *testing.T) {
+	_, err := (&net.Resolver{}).LookupNetIP(context.Background(), "ip6", "192.0.2.1")
+	require.Error(t, err)
+
+	var addrErr *net.AddrError
+	require.ErrorAs(t, err, &addrErr, "wrong-family lookup should return AddrError")
+	assert.Equal(t, errNoSuitableAddress, addrErr.Err, "net package error string should match our constant")
+}
+
+func TestLookupIP_OtherAddrError(t *testing.T) {
+	r := &mockResolver{results: map[string]mockLookup{
+		"ip4": {err: &net.AddrError{Err: "some other address problem", Addr: "example.com."}},
+	}}
+
+	result := LookupIP(context.Background(), r, "ip4", "example.com.", dns.TypeA)
+
+	assert.Equal(t, dns.RcodeServerFailure, result.Rcode, "unrecognized AddrError should map to SERVFAIL")
+}
+
+func TestLookupIP_NotFoundNXDomain(t *testing.T) {
+	r := &mockResolver{results: map[string]mockLookup{
+		"ip4": {err: &net.DNSError{Err: "no such host", Name: "example.com.", IsNotFound: true}},
+		"ip6": {err: &net.DNSError{Err: "no such host", Name: "example.com.", IsNotFound: true}},
+	}}
+
+	result := LookupIP(context.Background(), r, "ip4", "example.com.", dns.TypeA)
+
+	assert.Equal(t, dns.RcodeNameError, result.Rcode, "not found for both families should map to NXDOMAIN")
+}
+
+func TestLookupIP_NotFoundNoData(t *testing.T) {
+	r := &mockResolver{results: map[string]mockLookup{
+		"ip6": {err: &net.DNSError{Err: "no such host", Name: "example.com.", IsNotFound: true}},
+		"ip4": {ips: []netip.Addr{netip.MustParseAddr("192.0.2.1")}},
+	}}
+
+	result := LookupIP(context.Background(), r, "ip6", "example.com.", dns.TypeAAAA)
+
+	assert.Equal(t, dns.RcodeSuccess, result.Rcode, "not found with the other family present should map to NODATA")
+}
+
+func TestLookupIP_GenericError(t *testing.T) {
+	r := &mockResolver{results: map[string]mockLookup{
+		"ip4": {err: errors.New("connection refused")},
+	}}
+
+	result := LookupIP(context.Background(), r, "ip4", "example.com.", dns.TypeA)
+
+	assert.Equal(t, dns.RcodeServerFailure, result.Rcode, "generic error should map to SERVFAIL")
+}
+
+func TestLookupIP_DNSErrorNotIsNotFound(t *testing.T) {
+	r := &mockResolver{results: map[string]mockLookup{
+		"ip4": {err: &net.DNSError{Err: "server misbehaving", Name: "example.com.", IsTemporary: true}},
+	}}
+
+	result := LookupIP(context.Background(), r, "ip4", "example.com.", dns.TypeA)
+
+	assert.Equal(t, dns.RcodeServerFailure, result.Rcode, "upstream failure should map to SERVFAIL")
+}

client/internal/dns/server.go

@@ -301,6 +301,11 @@ func newDefaultServer(
 		warningDelayBase:  defaultWarningDelayBase,
 		healthRefresh:     make(chan struct{}, 1),
 	}
+	// Wire the local resolver against the peer status recorder so it can
+	// suppress A/AAAA answers that point at disconnected peers (typical
+	// case: synthesised private-service records pointing at an embedded
+	// proxy peer that just went offline).
+	defaultServer.localResolver.SetPeerConnectivity(localPeerConnectivity{statusRecorder})
 
 	// register with root zone, handler chain takes care of the routing
 	dnsService.RegisterMux(".", handlerChain)
@@ -772,13 +777,24 @@ func (s *DefaultServer) applyHostConfig() {
 // context is released rather than leaked until GC.
 func (s *DefaultServer) registerFallback() {
 	originalNameservers := s.hostManager.getOriginalNameservers()
-	if len(originalNameservers) == 0 {
+
+	serverIP := s.service.RuntimeIP()
+	var servers []netip.AddrPort
+	for _, ns := range originalNameservers {
+		if ns == serverIP {
+			log.Debugf("skipping original nameserver %s as it is the same as the server IP %s", ns, serverIP)
+			continue
+		}
+		servers = append(servers, netip.AddrPortFrom(ns, DefaultPort))
+	}
+
+	if len(servers) == 0 {
 		log.Debugf("no fallback upstreams to register; clearing PriorityFallback handler")
 		s.clearFallback()
 		return
 	}
 
-	log.Infof("registering original nameservers %v as upstream handlers with priority %d", originalNameservers, PriorityFallback)
+	log.Infof("registering original nameservers %v as upstream handlers with priority %d", servers, PriorityFallback)
 
 	handler, err := newUpstreamResolver(
 		s.ctx,
@@ -792,11 +808,6 @@ func (s *DefaultServer) registerFallback() {
 		return
 	}
 	handler.selectedRoutes = s.selectedRoutes
-
-	var servers []netip.AddrPort
-	for _, ns := range originalNameservers {
-		servers = append(servers, netip.AddrPortFrom(ns, DefaultPort))
-	}
 	handler.addRace(servers)
 
 	prev := s.fallbackHandler
@@ -1386,3 +1397,25 @@ func (s *DefaultServer) PopulateManagementDomain(mgmtURL *url.URL) error {
 	}
 	return nil
 }
+
+// localPeerConnectivity adapts *peer.Status to local.PeerConnectivity so
+// the local resolver can ask "is this IP a known peer and is it
+// connected?" without taking on the peer package as a dependency.
+// A nil status recorder always reports known=false so the resolver
+// short-circuits to the legacy "return everything" path.
+type localPeerConnectivity struct {
+	status *peer.Status
+}
+
+// IsConnectedByIP looks the IP up in the peerstore and surfaces both
+// the known and connected bits. Used by Resolver.filterDisconnectedPeerAnswers.
+func (l localPeerConnectivity) IsConnectedByIP(ip string) (known, connected bool) {
+	if l.status == nil {
+		return false, false
+	}
+	state, ok := l.status.PeerStateByIP(ip)
+	if !ok {
+		return false, false
+	}
+	return true, state.ConnStatus == peer.StatusConnected
+}

client/internal/engine.go

@@ -22,7 +22,6 @@ import (
 	log "github.com/sirupsen/logrus"
 	"golang.zx2c4.com/wireguard/tun/netstack"
 	"golang.zx2c4.com/wireguard/wgctrl/wgtypes"
-	"google.golang.org/protobuf/proto"
 
 	nberrors "github.com/netbirdio/netbird/client/errors"
 	"github.com/netbirdio/netbird/client/firewall"
@@ -54,8 +53,8 @@ import (
 	"github.com/netbirdio/netbird/client/internal/relay"
 	"github.com/netbirdio/netbird/client/internal/rosenpass"
 	"github.com/netbirdio/netbird/client/internal/routemanager"
-	"github.com/netbirdio/netbird/client/internal/routemanager/systemops"
 	"github.com/netbirdio/netbird/client/internal/statemanager"
+	"github.com/netbirdio/netbird/client/internal/syncstore"
 	"github.com/netbirdio/netbird/client/internal/updater"
 	"github.com/netbirdio/netbird/client/jobexec"
 	cProto "github.com/netbirdio/netbird/client/proto"
@@ -65,13 +64,13 @@ import (
 	mgm "github.com/netbirdio/netbird/shared/management/client"
 	"github.com/netbirdio/netbird/shared/management/domain"
 	mgmProto "github.com/netbirdio/netbird/shared/management/proto"
-	"github.com/netbirdio/netbird/shared/netiputil"
 	auth "github.com/netbirdio/netbird/shared/relay/auth/hmac"
 	relayClient "github.com/netbirdio/netbird/shared/relay/client"
 	signal "github.com/netbirdio/netbird/shared/signal/client"
 	sProto "github.com/netbirdio/netbird/shared/signal/proto"
 	"github.com/netbirdio/netbird/util"
 	"github.com/netbirdio/netbird/util/capture"
+	"github.com/netbirdio/netbird/version"
 )
 
 // PeerConnectionTimeoutMax is a timeout of an initial connection attempt to a remote peer.
@@ -148,6 +147,10 @@ type EngineConfig struct {
 
 	LogPath string
 	TempDir string
+
+	// StateDir is the directory holding the state file. The sync response
+	// (network map) is serialized here on platforms that persist it to disk.
+	StateDir string
 }
 
 // EngineServices holds the external service dependencies required by the Engine.
@@ -226,11 +229,16 @@ type Engine struct {
 
 	afpacketCapture *capture.AFPacketCapture
 
-	// Sync response persistence (protected by syncRespMux)
-	syncRespMux         sync.RWMutex
-	persistSyncResponse bool
-	latestSyncResponse  *mgmProto.SyncResponse
-	flowManager         nftypes.FlowManager
+	// Sync response persistence (protected by syncRespMux).
+	// syncStore is nil unless persistence has been enabled; its presence is
+	// what marks persistence as active. The backend (disk or memory) is
+	// selected per-platform; see the syncstore package. syncStoreDir is where
+	// a disk-backed store serializes to.
+	syncRespMux  sync.RWMutex
+	syncStore    syncstore.Store
+	syncStoreDir string
+
+	flowManager nftypes.FlowManager
 
 	// auto-update
 	updateManager *updater.Manager
@@ -292,6 +300,7 @@ func NewEngine(
 		jobExecutor:        jobexec.NewExecutor(),
 		clientMetrics:      services.ClientMetrics,
 		updateManager:      services.UpdateManager,
+		syncStoreDir:       config.StateDir,
 	}
 
 	log.Infof("I am: %s", config.WgPrivateKey.PublicKey().String())
@@ -520,6 +529,10 @@ func (e *Engine) Start(netbirdConfig *mgmProto.NetbirdConfig, mgmtURL *url.URL)
 		return fmt.Errorf("create wg interface: %w", err)
 	}
 
+	if filteredDevice := e.wgInterface.GetDevice(); filteredDevice != nil {
+		filteredDevice.SetPanicHandler(e.triggerClientRestart)
+	}
+
 	if err := e.createFirewall(); err != nil {
 		e.close()
 		return err
@@ -869,63 +882,25 @@ func (e *Engine) handleSync(update *mgmProto.SyncResponse) error {
 		e.handleAutoUpdateVersion(update.NetworkMap.PeerConfig.AutoUpdate)
 	}
 
-	if update.GetNetbirdConfig() != nil {
-		wCfg := update.GetNetbirdConfig()
-		err := e.updateTURNs(wCfg.GetTurns())
-		if err != nil {
-			return fmt.Errorf("update TURNs: %w", err)
-		}
+	if err := e.updateNetbirdConfig(update.GetNetbirdConfig()); err != nil {
+		return err
+	}
 
-		err = e.updateSTUNs(wCfg.GetStuns())
-		if err != nil {
-			return fmt.Errorf("update STUNs: %w", err)
-		}
-
-		var stunTurn []*stun.URI
-		stunTurn = append(stunTurn, e.STUNs...)
-		stunTurn = append(stunTurn, e.TURNs...)
-		e.stunTurn.Store(stunTurn)
-
-		err = e.handleRelayUpdate(wCfg.GetRelay())
-		if err != nil {
-			return err
-		}
-
-		err = e.handleFlowUpdate(wCfg.GetFlow())
-		if err != nil {
-			return fmt.Errorf("handle the flow configuration: %w", err)
-		}
-
-		if err := e.PopulateNetbirdConfig(wCfg, nil); err != nil {
-			log.Warnf("Failed to update DNS server config: %v", err)
-		}
-
-		// todo update signal
+	// Posture checks are bound to the network map presence:
+	//   NetworkMap != nil, checks present -> apply the received checks
+	//   NetworkMap != nil, checks nil     -> posture checks were removed, clear them
+	//   NetworkMap == nil                 -> config-only update (e.g. relay token rotation),
+	//                                        leave the previously applied checks untouched
+	nm := update.GetNetworkMap()
+	if nm == nil {
+		return nil
 	}
 
 	if err := e.updateChecksIfNew(update.Checks); err != nil {
 		return err
 	}
 
-	nm := update.GetNetworkMap()
-	if nm == nil {
-		return nil
-	}
-
-	// Persist sync response under the dedicated lock (syncRespMux), not under syncMsgMux.
-	// Read the storage-enabled flag under the syncRespMux too.
-	e.syncRespMux.RLock()
-	enabled := e.persistSyncResponse
-	e.syncRespMux.RUnlock()
-
-	// Store sync response if persistence is enabled
-	if enabled {
-		e.syncRespMux.Lock()
-		e.latestSyncResponse = update
-		e.syncRespMux.Unlock()
-
-		log.Debugf("sync response persisted with serial %d", nm.GetSerial())
-	}
+	e.persistSyncResponse(update)
 
 	// only apply new changes and ignore old ones
 	if err := e.updateNetworkMap(nm); err != nil {
@@ -937,6 +912,64 @@ func (e *Engine) handleSync(update *mgmProto.SyncResponse) error {
 	return nil
 }
 
+// updateNetbirdConfig applies the management-provided NetBird configuration:
+// STUN/TURN and relay servers, flow logging and DNS settings. A nil config is a no-op,
+// which is the case for sync updates carrying only a network map.
+func (e *Engine) updateNetbirdConfig(wCfg *mgmProto.NetbirdConfig) error {
+	if wCfg == nil {
+		return nil
+	}
+
+	if err := e.updateTURNs(wCfg.GetTurns()); err != nil {
+		return fmt.Errorf("update TURNs: %w", err)
+	}
+
+	if err := e.updateSTUNs(wCfg.GetStuns()); err != nil {
+		return fmt.Errorf("update STUNs: %w", err)
+	}
+
+	var stunTurn []*stun.URI
+	stunTurn = append(stunTurn, e.STUNs...)
+	stunTurn = append(stunTurn, e.TURNs...)
+	e.stunTurn.Store(stunTurn)
+
+	if err := e.handleRelayUpdate(wCfg.GetRelay()); err != nil {
+		return err
+	}
+
+	if err := e.handleFlowUpdate(wCfg.GetFlow()); err != nil {
+		return fmt.Errorf("handle the flow configuration: %w", err)
+	}
+
+	if err := e.PopulateNetbirdConfig(wCfg, nil); err != nil {
+		log.Warnf("Failed to update DNS server config: %v", err)
+	}
+
+	// todo update signal
+
+	return nil
+}
+
+// persistSyncResponse stores the full sync response so it can be restored on the next
+// startup. Persistence is enabled only when syncStore is set. The dedicated syncRespMux
+// (not syncMsgMux) is held for the whole Set so the store cannot be cleared (disabled /
+// engine close) mid-call and have this write resurrect a file that was just removed.
+func (e *Engine) persistSyncResponse(update *mgmProto.SyncResponse) {
+	e.syncRespMux.RLock()
+	defer e.syncRespMux.RUnlock()
+
+	if e.syncStore == nil {
+		return
+	}
+
+	if err := e.syncStore.Set(update); err != nil {
+		log.Errorf("failed to persist sync response: %v", err)
+		return
+	}
+
+	log.Debugf("sync response persisted with serial %d", update.GetNetworkMap().GetSerial())
+}
+
 func (e *Engine) handleRelayUpdate(update *mgmProto.RelayConfig) error {
 	if update != nil {
 		// when we receive token we expect valid address list too
@@ -1044,11 +1077,17 @@ func (e *Engine) updateConfig(conf *mgmProto.PeerConfig) error {
 		return ErrResetConnection
 	}
 
-	if !e.config.DisableIPv6 && e.hasIPv6Changed(conf) {
-		log.Infof("peer IPv6 address changed, restarting client")
-		_ = CtxGetState(e.ctx).Wrap(ErrResetConnection)
-		e.clientCancel()
-		return ErrResetConnection
+	if !e.config.DisableIPv6 {
+		reset, err := e.reconcileIPv6(conf)
+		if err != nil {
+			log.Warnf("reconcile IPv6 from PeerConfig: %v", err)
+		}
+		if reset {
+			log.Infof("peer IPv6 address changed value, restarting client")
+			_ = CtxGetState(e.ctx).Wrap(ErrResetConnection)
+			e.clientCancel()
+			return ErrResetConnection
+		}
 	}
 
 	if conf.GetSshConfig() != nil {
@@ -1063,31 +1102,65 @@ func (e *Engine) updateConfig(conf *mgmProto.PeerConfig) error {
 	state.PubKey = e.config.WgPrivateKey.PublicKey().String()
 	state.KernelInterface = !e.wgInterface.IsUserspaceBind()
 	state.FQDN = conf.GetFqdn()
+	state.WgPort = e.config.WgPort
 
 	e.statusRecorder.UpdateLocalPeerState(state)
 
 	return nil
 }
 
-// hasIPv6Changed reports whether the IPv6 overlay address in the peer config
-// differs from the configured address (added, removed, or changed).
-// Compares against e.config.WgAddr (not the interface address, which may have
-// been cleared by ClearIPv6 if OS assignment failed).
-func (e *Engine) hasIPv6Changed(conf *mgmProto.PeerConfig) bool {
-	current := e.config.WgAddr
+// reconcileIPv6 applies the management-supplied IPv6 overlay address to the
+// engine's WireGuard interface in place when possible. Three transitions:
+//
+//   - First v6 assignment (current had no v6, conf carries one): apply via
+//     WGIface.UpdateAddr, no reset. Critical for embedded clients whose
+//     boot config has no v6 — without this we reset on every fresh start
+//     once management has v6 enabled, orphaning any netstack listeners
+//     held outside the engine.
+//   - v6 removed (current had v6, conf carries none): clear in place, no
+//     reset.
+//   - v6 swapped to a different non-empty value: returns reset=true so the
+//     caller falls back to the engine-recreate path — the underlying
+//     interface address can't be safely swapped in place across all
+//     backends (gVisor netstack in particular fixes its address at
+//     CreateNetTUN time).
+//
+// Mutates e.config.WgAddr to match the applied state so subsequent
+// PeerConfig comparisons are stable.
+func (e *Engine) reconcileIPv6(conf *mgmProto.PeerConfig) (reset bool, err error) {
 	raw := conf.GetAddressV6()
+	current := e.config.WgAddr
 
 	if len(raw) == 0 {
-		return current.HasIPv6()
+		if !current.HasIPv6() {
+			return false, nil
+		}
+		current.ClearIPv6()
+		e.config.WgAddr = current
+		if err := e.wgInterface.UpdateAddr(current); err != nil {
+			return false, fmt.Errorf("clear ipv6 on wg interface: %w", err)
+		}
+		return false, nil
 	}
 
-	prefix, err := netiputil.DecodePrefix(raw)
-	if err != nil {
-		log.Errorf("decode v6 overlay address: %v", err)
-		return false
+	incoming := current
+	if err := incoming.SetIPv6FromCompact(raw); err != nil {
+		return false, fmt.Errorf("decode v6 overlay address: %w", err)
 	}
 
-	return !current.HasIPv6() || current.IPv6 != prefix.Addr() || current.IPv6Net != prefix.Masked()
+	if !current.HasIPv6() {
+		e.config.WgAddr = incoming
+		if err := e.wgInterface.UpdateAddr(incoming); err != nil {
+			return false, fmt.Errorf("apply ipv6 on wg interface: %w", err)
+		}
+		return false, nil
+	}
+
+	if current.IPv6 == incoming.IPv6 && current.IPv6Net == incoming.IPv6Net {
+		return false, nil
+	}
+
+	return true, nil
 }
 
 func (e *Engine) receiveJobEvents() {
@@ -1141,6 +1214,7 @@ func (e *Engine) handleBundle(params *mgmProto.BundleParameters) (*mgmProto.JobR
 		LogPath:        e.config.LogPath,
 		TempDir:        e.config.TempDir,
 		ClientMetrics:  e.clientMetrics,
+		DaemonVersion:  version.NetbirdVersion(),
 		RefreshStatus: func() {
 			e.RunHealthProbes(true)
 		},
@@ -1678,6 +1752,13 @@ func (e *Engine) receiveSignalEvents() {
 				return e.ctx.Err()
 			}
 
+			// Self-addressed heartbeat: the signal client's receive watchdog
+			// round-trips this through the server to confirm the receive stream
+			// is delivering. Liveness is already recorded before this handler.
+			if msg.GetBody().GetType() == sProto.Body_HEARTBEAT {
+				return nil
+			}
+
 			conn, ok := e.peerStore.PeerConn(msg.Key)
 			if !ok {
 				return fmt.Errorf("wrongly addressed message %s", msg.Key)
@@ -1813,6 +1894,18 @@ func (e *Engine) close() {
 	if err := e.portForwardManager.GracefullyStop(ctx); err != nil {
 		log.Warnf("failed to gracefully stop port forwarding manager: %s", err)
 	}
+
+	// Drop any persisted sync response so its network map does not linger on
+	// disk after the engine stops (and cannot leak into a later run).
+	e.syncRespMux.Lock()
+	store := e.syncStore
+	e.syncStore = nil
+	e.syncRespMux.Unlock()
+	if store != nil {
+		if err := store.Clear(); err != nil {
+			log.Warnf("failed to clear persisted sync response on close: %v", err)
+		}
+	}
 }
 
 func (e *Engine) readInitialSettings() ([]*route.Route, *nbdns.Config, bool, error) {
@@ -1864,7 +1957,6 @@ func (e *Engine) newWgIface() (*iface.WGIface, error) {
 		WGPrivKey:    e.config.WgPrivateKey.String(),
 		MTU:          e.config.MTU,
 		TransportNet: transportNet,
-		FilterFn:     e.addrViaRoutes,
 		DisableDNS:   e.config.DisableDNS,
 	}
 
@@ -1967,6 +2059,29 @@ func (e *Engine) GetClientMetrics() *metrics.ClientMetrics {
 	return e.clientMetrics
 }
 
+// Performance bundles runtime-adjustable tunnel pool knobs.
+// See Engine.SetPerformance. Nil fields are ignored.
+type Performance struct {
+	PreallocatedBuffersPerPool *uint32
+}
+
+// SetPerformance applies the given tuning to this engine's live Device.
+func (e *Engine) SetPerformance(t Performance) error {
+	e.syncMsgMux.Lock()
+	defer e.syncMsgMux.Unlock()
+	if e.wgInterface == nil {
+		return fmt.Errorf("wg interface not initialized")
+	}
+	dev := e.wgInterface.GetWGDevice()
+	if dev == nil {
+		return fmt.Errorf("wg device not initialized")
+	}
+	if t.PreallocatedBuffersPerPool != nil {
+		dev.SetPreallocatedBuffersPerPool(*t.PreallocatedBuffersPerPool)
+	}
+	return nil
+}
+
 func findIPFromInterfaceName(ifaceName string) (net.IP, error) {
 	iface, err := net.InterfaceByName(ifaceName)
 	if err != nil {
@@ -2089,21 +2204,6 @@ func (e *Engine) startNetworkMonitor() {
 	}()
 }
 
-func (e *Engine) addrViaRoutes(addr netip.Addr) (bool, netip.Prefix, error) {
-	var vpnRoutes []netip.Prefix
-	for _, routes := range e.routeManager.GetClientRoutes() {
-		if len(routes) > 0 && routes[0] != nil {
-			vpnRoutes = append(vpnRoutes, routes[0].Network)
-		}
-	}
-
-	if isVpn, prefix := systemops.IsAddrRouted(addr, vpnRoutes); isVpn {
-		return true, prefix, nil
-	}
-
-	return false, netip.Prefix{}, nil
-}
-
 func (e *Engine) stopDNSServer() {
 	if e.dnsServer == nil {
 		return
@@ -2119,45 +2219,42 @@ func (e *Engine) stopDNSServer() {
 	e.statusRecorder.UpdateDNSStates(nsGroupStates)
 }
 
-// SetSyncResponsePersistence enables or disables sync response persistence
+// SetSyncResponsePersistence enables or disables sync response persistence.
+// The store is only instantiated while persistence is enabled; construction
+// itself drops any stale data left over from an earlier run (see syncstore).
 func (e *Engine) SetSyncResponsePersistence(enabled bool) {
 	e.syncRespMux.Lock()
 	defer e.syncRespMux.Unlock()
 
-	if enabled == e.persistSyncResponse {
+	if enabled == (e.syncStore != nil) {
 		return
 	}
-	e.persistSyncResponse = enabled
 	log.Debugf("Sync response persistence is set to %t", enabled)
 
 	if !enabled {
-		e.latestSyncResponse = nil
+		if err := e.syncStore.Clear(); err != nil {
+			log.Warnf("failed to clear persisted sync response: %v", err)
+		}
+		e.syncStore = nil
+		return
 	}
+
+	e.syncStore = syncstore.New(e.syncStoreDir)
 }
 
 // GetLatestSyncResponse returns the stored sync response if persistence is enabled
 func (e *Engine) GetLatestSyncResponse() (*mgmProto.SyncResponse, error) {
+	// Hold the lock for the whole Get so the store cannot be cleared
+	// (disabled / engine close) mid-call.
 	e.syncRespMux.RLock()
-	enabled := e.persistSyncResponse
-	latest := e.latestSyncResponse
-	e.syncRespMux.RUnlock()
+	defer e.syncRespMux.RUnlock()
 
-	if !enabled {
+	if e.syncStore == nil {
 		return nil, errors.New("sync response persistence is disabled")
 	}
 
-	if latest == nil {
-		//nolint:nilnil
-		return nil, nil
-	}
-
-	log.Debugf("Retrieving latest sync response with size %d bytes", proto.Size(latest))
-	sr, ok := proto.Clone(latest).(*mgmProto.SyncResponse)
-	if !ok {
-		return nil, fmt.Errorf("failed to clone sync response")
-	}
-
-	return sr, nil
+	//nolint:nilnil
+	return e.syncStore.Get()
 }
 
 // GetWgAddr returns the wireguard address
@@ -2193,7 +2290,7 @@ func (e *Engine) updateDNSForwarder(
 	enabled bool,
 	fwdEntries []*dnsfwd.ForwarderEntry,
 ) {
-	if e.config.DisableServerRoutes {
+	if e.config.DisableServerRoutes || e.config.BlockInbound {
 		return
 	}
 

client/internal/engine_reconcileipv6_test.go

@@ -0,0 +1,305 @@
+package internal
+
+import (
+	"context"
+	"errors"
+	"net/netip"
+	"sync"
+	"testing"
+
+	"github.com/stretchr/testify/assert"
+	"github.com/stretchr/testify/require"
+
+	"github.com/netbirdio/netbird/client/iface/wgaddr"
+	"github.com/netbirdio/netbird/client/internal/peer"
+	mgmtProto "github.com/netbirdio/netbird/shared/management/proto"
+	"github.com/netbirdio/netbird/shared/netiputil"
+)
+
+// reconcileIPv6 / updateConfig regression suite. Locks down the behavior that
+// PR #5631 (main-side IPv6 overlay support) accidentally broke for embedded
+// netstack clients: any first NetworkMap update that brings an IPv6 address
+// used to trigger ErrResetConnection, which destroys the netstack and orphans
+// every listener bound on it (proxy-side inbound listeners in particular).
+// The fix in reconcileIPv6 distinguishes "v6 first-assigned" (apply in place)
+// from "v6 swapped value" (must reset).
+
+func mustEncodeV6Prefix(t *testing.T, p netip.Prefix) []byte {
+	t.Helper()
+	b, err := netiputil.EncodePrefix(p)
+	require.NoError(t, err, "encode v6 prefix %s", p)
+	return b
+}
+
+// reconcileIPv6Fixture builds the smallest Engine the function under test
+// needs: a config (with WgAddr being the load-bearing field) and a wgInterface
+// whose UpdateAddr call we can observe.
+func reconcileIPv6Fixture(t *testing.T, initial wgaddr.Address) (*Engine, *MockWGIface, *wgaddr.Address) {
+	t.Helper()
+	var applied wgaddr.Address
+	mock := &MockWGIface{
+		AddressFunc: func() wgaddr.Address { return initial },
+		UpdateAddrFunc: func(a wgaddr.Address) error {
+			applied = a
+			return nil
+		},
+	}
+	ctx, cancel := context.WithCancel(context.Background())
+	t.Cleanup(cancel)
+	e := &Engine{
+		ctx:         ctx,
+		clientCtx:   ctx,
+		clientCancel: cancel,
+		config:      &EngineConfig{WgAddr: initial},
+		wgInterface: mock,
+		syncMsgMux:  &sync.Mutex{},
+	}
+	return e, mock, &applied
+}
+
+func TestReconcileIPv6_FirstAssignment_AppliesInPlace(t *testing.T) {
+	// Embedded clients boot v4-only; management later assigns a v6 overlay.
+	// The fix: apply v6 in place, return reset=false. Pre-fix this case
+	// fell through to the "v6 changed" branch and reset the engine.
+	v4 := wgaddr.MustParseWGAddress("100.64.0.1/16")
+	e, mock, applied := reconcileIPv6Fixture(t, v4)
+
+	v6Prefix := netip.MustParsePrefix("fd00::1/64")
+	conf := &mgmtProto.PeerConfig{
+		Address:    v4.String(),
+		AddressV6:  mustEncodeV6Prefix(t, v6Prefix),
+	}
+
+	reset, err := e.reconcileIPv6(conf)
+	require.NoError(t, err)
+	assert.False(t, reset, "first v6 assignment must NOT request an engine reset")
+
+	require.True(t, e.config.WgAddr.HasIPv6(), "engine config must record the new v6")
+	assert.Equal(t, v6Prefix.Addr(), e.config.WgAddr.IPv6, "engine config v6 address must match")
+	assert.Equal(t, v6Prefix.Masked(), e.config.WgAddr.IPv6Net, "engine config v6 prefix must match")
+
+	require.True(t, applied.HasIPv6(), "WGIface.UpdateAddr must be called with v6 populated")
+	assert.Equal(t, v6Prefix.Addr(), applied.IPv6, "UpdateAddr must carry the new v6")
+	_ = mock
+}
+
+func TestReconcileIPv6_NoChange_NoOp(t *testing.T) {
+	// Steady state: management redelivers the same PeerConfig. No interface
+	// mutation, no reset. Guards against an infinite reset loop if the
+	// comparison ever drifts (e.g. address-vs-prefix masking bugs).
+	v6Prefix := netip.MustParsePrefix("fd00::1/64")
+	addr := wgaddr.MustParseWGAddress("100.64.0.1/16")
+	require.NoError(t, addr.SetIPv6FromCompact(mustEncodeV6Prefix(t, v6Prefix)))
+
+	updateAddrCalled := false
+	mock := &MockWGIface{
+		AddressFunc: func() wgaddr.Address { return addr },
+		UpdateAddrFunc: func(a wgaddr.Address) error {
+			updateAddrCalled = true
+			return nil
+		},
+	}
+	ctx, cancel := context.WithCancel(context.Background())
+	defer cancel()
+	e := &Engine{
+		ctx:         ctx,
+		clientCtx:   ctx,
+		clientCancel: cancel,
+		config:      &EngineConfig{WgAddr: addr},
+		wgInterface: mock,
+		syncMsgMux:  &sync.Mutex{},
+	}
+
+	conf := &mgmtProto.PeerConfig{
+		Address:   addr.String(),
+		AddressV6: mustEncodeV6Prefix(t, v6Prefix),
+	}
+	reset, err := e.reconcileIPv6(conf)
+	require.NoError(t, err)
+	assert.False(t, reset, "unchanged v6 must NOT trigger reset")
+	assert.False(t, updateAddrCalled, "unchanged v6 must NOT call UpdateAddr")
+}
+
+func TestReconcileIPv6_Removed_AppliesInPlace(t *testing.T) {
+	// Management withdraws v6 (e.g. account toggled off the v6 group).
+	// Cleared in place, no reset.
+	v6Prefix := netip.MustParsePrefix("fd00::1/64")
+	addr := wgaddr.MustParseWGAddress("100.64.0.1/16")
+	require.NoError(t, addr.SetIPv6FromCompact(mustEncodeV6Prefix(t, v6Prefix)))
+
+	e, _, applied := reconcileIPv6Fixture(t, addr)
+	e.config.WgAddr = addr
+
+	conf := &mgmtProto.PeerConfig{
+		Address:   addr.String(),
+		AddressV6: nil,
+	}
+	reset, err := e.reconcileIPv6(conf)
+	require.NoError(t, err)
+	assert.False(t, reset, "v6 removed must NOT trigger reset")
+
+	assert.False(t, e.config.WgAddr.HasIPv6(), "engine config must reflect v6 cleared")
+	assert.False(t, applied.HasIPv6(), "UpdateAddr must receive cleared v6")
+}
+
+func TestReconcileIPv6_PrefixLengthChanged_RequestsReset(t *testing.T) {
+	// Same v6 host, different mask (e.g. /64 → /80). Treated like a value
+	// change because the new netmask redefines the broadcast/scope.
+	oldPrefix := netip.MustParsePrefix("fd00::1/64")
+	newPrefix := netip.MustParsePrefix("fd00::1/80")
+
+	addr := wgaddr.MustParseWGAddress("100.64.0.1/16")
+	require.NoError(t, addr.SetIPv6FromCompact(mustEncodeV6Prefix(t, oldPrefix)))
+
+	updateAddrCalled := false
+	mock := &MockWGIface{
+		AddressFunc: func() wgaddr.Address { return addr },
+		UpdateAddrFunc: func(a wgaddr.Address) error {
+			updateAddrCalled = true
+			return nil
+		},
+	}
+	ctx, cancel := context.WithCancel(context.Background())
+	defer cancel()
+	e := &Engine{
+		ctx:          ctx,
+		clientCtx:    ctx,
+		clientCancel: cancel,
+		config:       &EngineConfig{WgAddr: addr},
+		wgInterface:  mock,
+		syncMsgMux:   &sync.Mutex{},
+	}
+
+	conf := &mgmtProto.PeerConfig{
+		Address:   addr.String(),
+		AddressV6: mustEncodeV6Prefix(t, newPrefix),
+	}
+	reset, err := e.reconcileIPv6(conf)
+	require.NoError(t, err)
+	assert.True(t, reset, "v6 prefix length change must request a reset")
+	assert.False(t, updateAddrCalled, "v6 prefix length change must NOT touch the interface")
+}
+
+func TestReconcileIPv6_ValueChanged_RequestsReset(t *testing.T) {
+	// v6 was X, now Y. The netstack backend can't safely swap an existing
+	// address in place — fall back to the engine recreate path.
+	oldPrefix := netip.MustParsePrefix("fd00::1/64")
+	newPrefix := netip.MustParsePrefix("fd00::2/64")
+
+	addr := wgaddr.MustParseWGAddress("100.64.0.1/16")
+	require.NoError(t, addr.SetIPv6FromCompact(mustEncodeV6Prefix(t, oldPrefix)))
+
+	updateAddrCalled := false
+	mock := &MockWGIface{
+		AddressFunc: func() wgaddr.Address { return addr },
+		UpdateAddrFunc: func(a wgaddr.Address) error {
+			updateAddrCalled = true
+			return nil
+		},
+	}
+	ctx, cancel := context.WithCancel(context.Background())
+	defer cancel()
+	e := &Engine{
+		ctx:          ctx,
+		clientCtx:    ctx,
+		clientCancel: cancel,
+		config:       &EngineConfig{WgAddr: addr},
+		wgInterface:  mock,
+		syncMsgMux:   &sync.Mutex{},
+	}
+
+	conf := &mgmtProto.PeerConfig{
+		Address:   addr.String(),
+		AddressV6: mustEncodeV6Prefix(t, newPrefix),
+	}
+	reset, err := e.reconcileIPv6(conf)
+	require.NoError(t, err)
+	assert.True(t, reset, "v6 value change must request a reset")
+	assert.False(t, updateAddrCalled,
+		"v6 value change must NOT call UpdateAddr — caller will recreate the interface")
+}
+
+func TestReconcileIPv6_InvalidBytes_ReturnsError(t *testing.T) {
+	// Corrupt PeerConfig.AddressV6 must not crash the engine and must not
+	// trigger a spurious reset.
+	v4 := wgaddr.MustParseWGAddress("100.64.0.1/16")
+	e, _, applied := reconcileIPv6Fixture(t, v4)
+
+	conf := &mgmtProto.PeerConfig{
+		Address:   v4.String(),
+		AddressV6: []byte{0x00}, // truncated, definitely not a valid prefix
+	}
+	reset, err := e.reconcileIPv6(conf)
+	require.Error(t, err, "malformed v6 bytes must surface an error")
+	assert.False(t, reset, "decode error must NOT request a reset")
+	assert.False(t, applied.HasIPv6(), "decode error must NOT touch the interface")
+}
+
+func TestReconcileIPv6_UpdateAddrError_DoesNotPropagateReset(t *testing.T) {
+	// If WGIface.UpdateAddr fails (e.g. OS-side assignment error on a
+	// kernel device), reconcileIPv6 returns the error to the caller for
+	// logging — but it must NOT request a reset. The whole point of the
+	// fix is to AVOID the reset cascade on v6 transitions.
+	v4 := wgaddr.MustParseWGAddress("100.64.0.1/16")
+	mock := &MockWGIface{
+		AddressFunc:    func() wgaddr.Address { return v4 },
+		UpdateAddrFunc: func(_ wgaddr.Address) error { return errors.New("os refused address") },
+	}
+	ctx, cancel := context.WithCancel(context.Background())
+	defer cancel()
+	e := &Engine{
+		ctx:          ctx,
+		clientCtx:    ctx,
+		clientCancel: cancel,
+		config:       &EngineConfig{WgAddr: v4},
+		wgInterface:  mock,
+		syncMsgMux:   &sync.Mutex{},
+	}
+
+	v6Prefix := netip.MustParsePrefix("fd00::1/64")
+	conf := &mgmtProto.PeerConfig{
+		Address:   v4.String(),
+		AddressV6: mustEncodeV6Prefix(t, v6Prefix),
+	}
+	reset, err := e.reconcileIPv6(conf)
+	require.Error(t, err, "UpdateAddr failure must surface")
+	assert.False(t, reset, "UpdateAddr failure must NOT request a reset")
+}
+
+func TestUpdateConfig_V6FirstAssignment_DoesNotResetEngine(t *testing.T) {
+	// The integration check: updateConfig must not return ErrResetConnection
+	// when the only change between current state and the new PeerConfig is
+	// "v6 added". Pre-fix this returned ErrResetConnection, tearing down
+	// every listener bound on the engine's netstack.
+	v4 := wgaddr.MustParseWGAddress("100.64.0.1/16")
+	mock := &MockWGIface{
+		AddressFunc:        func() wgaddr.Address { return v4 },
+		UpdateAddrFunc:     func(_ wgaddr.Address) error { return nil },
+		IsUserspaceBindFunc: func() bool { return true },
+	}
+	ctx, cancel := context.WithCancel(context.Background())
+	defer cancel()
+	e := &Engine{
+		ctx:            ctx,
+		clientCtx:      ctx,
+		clientCancel:   cancel,
+		config:         &EngineConfig{WgAddr: v4, WgPort: 51820},
+		wgInterface:    mock,
+		syncMsgMux:     &sync.Mutex{},
+		statusRecorder: peer.NewRecorder("https://mgm.test"),
+	}
+
+	v6Prefix := netip.MustParsePrefix("fd00::1/64")
+	conf := &mgmtProto.PeerConfig{
+		Address:   v4.String(),
+		AddressV6: mustEncodeV6Prefix(t, v6Prefix),
+	}
+
+	err := e.updateConfig(conf)
+	assert.NoError(t, err,
+		"updateConfig MUST NOT return ErrResetConnection when v6 is added for the first time — that's the bug fix")
+	assert.NotErrorIs(t, err, ErrResetConnection)
+
+	require.True(t, e.config.WgAddr.HasIPv6(), "engine config must record the assigned v6 after updateConfig")
+	assert.Equal(t, v6Prefix.Addr(), e.config.WgAddr.IPv6)
+}

client/internal/engine_test.go

@@ -27,7 +27,7 @@ import (
 	"github.com/netbirdio/netbird/client/internal/stdnet"
 	"github.com/netbirdio/netbird/management/server/job"
 
-	"github.com/netbirdio/management-integrations/integrations"
+	"github.com/netbirdio/netbird/management/server/integrations/integrated_validator/validator"
 
 	"github.com/netbirdio/netbird/management/internals/controllers/network_map/controller"
 	"github.com/netbirdio/netbird/management/internals/controllers/network_map/update_channel"
@@ -67,7 +67,6 @@ import (
 	mgmt "github.com/netbirdio/netbird/shared/management/client"
 	mgmtProto "github.com/netbirdio/netbird/shared/management/proto"
 	relayClient "github.com/netbirdio/netbird/shared/relay/client"
-	"github.com/netbirdio/netbird/shared/netiputil"
 	signal "github.com/netbirdio/netbird/shared/signal/client"
 	"github.com/netbirdio/netbird/shared/signal/proto"
 	signalServer "github.com/netbirdio/netbird/signal/server"
@@ -1641,7 +1640,7 @@ func startManagement(t *testing.T, dataDir, testFile string) (*grpc.Server, stri
 		return nil, "", err
 	}
 
-	ia, _ := integrations.NewIntegratedValidator(context.Background(), peersManager, nil, eventStore, cacheStore)
+	ia, _ := validator.NewIntegratedValidator(context.Background(), peersManager, nil, eventStore, cacheStore)
 
 	metrics, err := telemetry.NewDefaultAppMetrics(context.Background())
 	require.NoError(t, err)
@@ -1707,82 +1706,12 @@ func getPeers(e *Engine) int {
 	return len(e.peerStore.PeersPubKey())
 }
 
-func mustEncodePrefix(t *testing.T, p netip.Prefix) []byte {
-	t.Helper()
-	b, err := netiputil.EncodePrefix(p)
-	require.NoError(t, err)
-	return b
-}
-
-func TestEngine_hasIPv6Changed(t *testing.T) {
-	v4Only := wgaddr.MustParseWGAddress("100.64.0.1/16")
-
-	v4v6 := wgaddr.MustParseWGAddress("100.64.0.1/16")
-	v4v6.IPv6 = netip.MustParseAddr("fd00::1")
-	v4v6.IPv6Net = netip.MustParsePrefix("fd00::1/64").Masked()
-
-	tests := []struct {
-		name     string
-		current  wgaddr.Address
-		confV6   []byte
-		expected bool
-	}{
-		{
-			name:     "no v6 before, no v6 now",
-			current:  v4Only,
-			confV6:   nil,
-			expected: false,
-		},
-		{
-			name:     "no v6 before, v6 added",
-			current:  v4Only,
-			confV6:   mustEncodePrefix(t, netip.MustParsePrefix("fd00::1/64")),
-			expected: true,
-		},
-		{
-			name:     "had v6, now removed",
-			current:  v4v6,
-			confV6:   nil,
-			expected: true,
-		},
-		{
-			name:     "had v6, same v6",
-			current:  v4v6,
-			confV6:   mustEncodePrefix(t, netip.MustParsePrefix("fd00::1/64")),
-			expected: false,
-		},
-		{
-			name:     "had v6, different v6",
-			current:  v4v6,
-			confV6:   mustEncodePrefix(t, netip.MustParsePrefix("fd00::2/64")),
-			expected: true,
-		},
-		{
-			name:     "same v6 addr, different prefix length",
-			current:  v4v6,
-			confV6:   mustEncodePrefix(t, netip.MustParsePrefix("fd00::1/80")),
-			expected: true,
-		},
-		{
-			name:     "decode error keeps status quo",
-			current:  v4Only,
-			confV6:   []byte{1, 2, 3},
-			expected: false,
-		},
-	}
-
-	for _, tt := range tests {
-		t.Run(tt.name, func(t *testing.T) {
-			engine := &Engine{
-				config: &EngineConfig{WgAddr: tt.current},
-			}
-			conf := &mgmtProto.PeerConfig{
-				AddressV6: tt.confV6,
-			}
-			assert.Equal(t, tt.expected, engine.hasIPv6Changed(conf))
-		})
-	}
-}
+// The former TestEngine_hasIPv6Changed has been superseded by
+// engine_reconcileipv6_test.go — the underlying function (hasIPv6Changed)
+// was replaced by reconcileIPv6, which applies "v6 added" / "v6 removed"
+// in place instead of demanding a full engine reset. The behavioral
+// matrix the old test enforced is now covered, with corrected expectations,
+// by TestReconcileIPv6_* in that sibling file.
 
 func TestFilterAllowedIPs(t *testing.T) {
 	v4v6Addr := wgaddr.MustParseWGAddress("100.64.0.1/16")

client/internal/lazyconn/support.go

@@ -4,6 +4,8 @@ import (
 	"strings"
 
 	"github.com/hashicorp/go-version"
+
+	nbversion "github.com/netbirdio/netbird/version"
 )
 
 var (
@@ -11,7 +13,7 @@ var (
 )
 
 func IsSupported(agentVersion string) bool {
-	if agentVersion == "development" {
+	if nbversion.IsDevelopmentVersion(agentVersion) {
 		return true
 	}
 

client/internal/networkmonitor/check_change_common.go

@@ -50,7 +50,7 @@ func routeCheck(ctx context.Context, fd int, nexthopv4, nexthopv6 systemops.Next
 		switch msg.Type {
 		// handle route changes
 		case unix.RTM_ADD, syscall.RTM_DELETE:
-			route, err := parseRouteMessage(buf[:n])
+			route, flags, err := parseRouteMessage(buf[:n])
 			if err != nil {
 				log.Debugf("Network monitor: error parsing routing message: %v", err)
 				continue
@@ -66,6 +66,10 @@ func routeCheck(ctx context.Context, fd int, nexthopv4, nexthopv6 systemops.Next
 			}
 			switch msg.Type {
 			case unix.RTM_ADD:
+				if systemops.IgnoreAddedDefaultRoute(flags) {
+					log.Debugf("Network monitor: ignoring added default route via %s, interface %s, flags %#x", route.Gw, intf, flags)
+					continue
+				}
 				log.Infof("Network monitor: default route changed: via %s, interface %s", route.Gw, intf)
 				return nil
 			case unix.RTM_DELETE:
@@ -78,22 +82,26 @@ func routeCheck(ctx context.Context, fd int, nexthopv4, nexthopv6 systemops.Next
 	}
 }
 
-func parseRouteMessage(buf []byte) (*systemops.Route, error) {
+func parseRouteMessage(buf []byte) (*systemops.Route, int, error) {
 	msgs, err := route.ParseRIB(route.RIBTypeRoute, buf)
 	if err != nil {
-		return nil, fmt.Errorf("parse RIB: %v", err)
+		return nil, 0, fmt.Errorf("parse RIB: %v", err)
 	}
 
 	if len(msgs) != 1 {
-		return nil, fmt.Errorf("unexpected RIB message msgs: %v", msgs)
+		return nil, 0, fmt.Errorf("unexpected RIB message msgs: %v", msgs)
 	}
 
 	msg, ok := msgs[0].(*route.RouteMessage)
 	if !ok {
-		return nil, fmt.Errorf("unexpected RIB message type: %T", msgs[0])
+		return nil, 0, fmt.Errorf("unexpected RIB message type: %T", msgs[0])
 	}
 
-	return systemops.MsgToRoute(msg)
+	r, err := systemops.MsgToRoute(msg)
+	if err != nil {
+		return nil, 0, err
+	}
+	return r, msg.Flags, nil
 }
 
 // waitReadable blocks until fd has data to read, or ctx is cancelled.

client/internal/peer/conn.go

@@ -23,6 +23,7 @@ import (
 	"github.com/netbirdio/netbird/client/internal/peer/id"
 	"github.com/netbirdio/netbird/client/internal/peer/worker"
 	"github.com/netbirdio/netbird/client/internal/portforward"
+	"github.com/netbirdio/netbird/client/internal/rosenpass"
 	"github.com/netbirdio/netbird/client/internal/stdnet"
 	"github.com/netbirdio/netbird/route"
 	relayClient "github.com/netbirdio/netbird/shared/relay/client"
@@ -899,7 +900,7 @@ func (conn *Conn) presharedKey(remoteRosenpassKey []byte) *wgtypes.Key {
 	}
 
 	// Fallback to deterministic key if no NetBird PSK is configured
-	determKey, err := conn.rosenpassDetermKey()
+	determKey, err := rosenpass.DeterministicSeedKey(conn.config.LocalKey, conn.config.Key)
 	if err != nil {
 		conn.Log.Errorf("failed to generate Rosenpass initial key: %v", err)
 		return nil
@@ -908,26 +909,6 @@ func (conn *Conn) presharedKey(remoteRosenpassKey []byte) *wgtypes.Key {
 	return determKey
 }
 
-// todo: move this logic into Rosenpass package
-func (conn *Conn) rosenpassDetermKey() (*wgtypes.Key, error) {
-	lk := []byte(conn.config.LocalKey)
-	rk := []byte(conn.config.Key) // remote key
-	var keyInput []byte
-	if string(lk) > string(rk) {
-		//nolint:gocritic
-		keyInput = append(lk[:16], rk[:16]...)
-	} else {
-		//nolint:gocritic
-		keyInput = append(rk[:16], lk[:16]...)
-	}
-
-	key, err := wgtypes.NewKey(keyInput)
-	if err != nil {
-		return nil, err
-	}
-	return &key, nil
-}
-
 func isController(config ConnConfig) bool {
 	return config.LocalKey > config.Key
 }

client/internal/peer/conn_status.go

@@ -26,7 +26,6 @@ type connStatusInputs struct {
 	iceInProgress       bool // a negotiation is currently in flight
 }
 
-
 // ConnStatus describe the status of a peer's connection
 type ConnStatus int32
 

client/internal/peer/status.go

@@ -111,6 +111,7 @@ type LocalPeerState struct {
 	PubKey          string
 	KernelInterface bool
 	FQDN            string
+	WgPort          int
 	Routes          map[string]struct{}
 }
 
@@ -185,10 +186,14 @@ func (s *StatusChangeSubscription) Events() chan map[string]RouterState {
 	return s.eventsChan
 }
 
-// Status holds a state of peers, signal, management connections and relays
+// Status holds a state of peers, signal, management connections and relays.
+// mux is an RWMutex so hot read paths (notably PeerStateByIP, called for
+// every private-service request) don't contend against each other.
+// Pure read methods take RLock; anything that mutates state takes Lock.
 type Status struct {
-	mux                   sync.Mutex
+	mux                   sync.RWMutex
 	peers                 map[string]State
+	ipToKey               map[string]string
 	changeNotify          map[string]map[string]*StatusChangeSubscription // map[peerID]map[subscriptionID]*StatusChangeSubscription
 	signalState           bool
 	signalError           error
@@ -227,6 +232,7 @@ type Status struct {
 func NewRecorder(mgmAddress string) *Status {
 	return &Status{
 		peers:                 make(map[string]State),
+		ipToKey:               make(map[string]string),
 		changeNotify:          make(map[string]map[string]*StatusChangeSubscription),
 		eventStreams:          make(map[string]chan *proto.SystemEvent),
 		eventQueue:            NewEventQueue(eventQueueSize),
@@ -278,13 +284,19 @@ func (d *Status) AddPeer(peerPubKey string, fqdn string, ip string, ipv6 string)
 		Mux:        new(sync.RWMutex),
 	}
 	d.peerListChangedForNotification = true
+	if ipv6 != "" {
+		d.ipToKey[ipv6] = peerPubKey
+	}
+	if ip != "" {
+		d.ipToKey[ip] = peerPubKey
+	}
 	return nil
 }
 
 // GetPeer adds peer to Daemon status map
 func (d *Status) GetPeer(peerPubKey string) (State, error) {
-	d.mux.Lock()
-	defer d.mux.Unlock()
+	d.mux.RLock()
+	defer d.mux.RUnlock()
 
 	state, ok := d.peers[peerPubKey]
 	if !ok {
@@ -294,8 +306,8 @@ func (d *Status) GetPeer(peerPubKey string) (State, error) {
 }
 
 func (d *Status) PeerByIP(ip string) (string, bool) {
-	d.mux.Lock()
-	defer d.mux.Unlock()
+	d.mux.RLock()
+	defer d.mux.RUnlock()
 
 	for _, state := range d.peers {
 		if state.IP == ip {
@@ -305,17 +317,45 @@ func (d *Status) PeerByIP(ip string) (string, bool) {
 	return "", false
 }
 
+// PeerStateByIP returns the full peer State for the given tunnel IP.
+// Matches against either the IPv4 (State.IP) or IPv6 (State.IPv6) tunnel
+// address so dual-stack peers are reachable on either family. Only
+// active peers are matched; peers moved into the offline slice by
+// ReplaceOfflinePeers are intentionally treated as unknown.
+func (d *Status) PeerStateByIP(ip string) (State, bool) {
+	if ip == "" {
+		return State{}, false
+	}
+	d.mux.RLock()
+	defer d.mux.RUnlock()
+	key, ok := d.ipToKey[ip]
+	if !ok {
+		return State{}, false
+	}
+	state, ok := d.peers[key]
+	if ok {
+		return state, true
+	}
+	return State{}, false
+}
+
 // RemovePeer removes peer from Daemon status map
 func (d *Status) RemovePeer(peerPubKey string) error {
 	d.mux.Lock()
 	defer d.mux.Unlock()
 
-	_, ok := d.peers[peerPubKey]
+	p, ok := d.peers[peerPubKey]
 	if !ok {
 		return errors.New("no peer with to remove")
 	}
 
 	delete(d.peers, peerPubKey)
+	if mappedKey, exists := d.ipToKey[p.IP]; exists && mappedKey == peerPubKey {
+		delete(d.ipToKey, p.IP)
+	}
+	if mappedKey, exists := d.ipToKey[p.IPv6]; exists && mappedKey == peerPubKey {
+		delete(d.ipToKey, p.IPv6)
+	}
 	d.peerListChangedForNotification = true
 	return nil
 }
@@ -702,8 +742,8 @@ func (d *Status) UnsubscribePeerStateChanges(subscription *StatusChangeSubscript
 
 // GetLocalPeerState returns the local peer state
 func (d *Status) GetLocalPeerState() LocalPeerState {
-	d.mux.Lock()
-	defer d.mux.Unlock()
+	d.mux.RLock()
+	defer d.mux.RUnlock()
 	return d.localPeer.Clone()
 }
 
@@ -909,8 +949,8 @@ func (d *Status) DeleteResolvedDomainsStates(domain domain.Domain) {
 }
 
 func (d *Status) GetRosenpassState() RosenpassState {
-	d.mux.Lock()
-	defer d.mux.Unlock()
+	d.mux.RLock()
+	defer d.mux.RUnlock()
 	return RosenpassState{
 		d.rosenpassEnabled,
 		d.rosenpassPermissive,
@@ -918,14 +958,14 @@ func (d *Status) GetRosenpassState() RosenpassState {
 }
 
 func (d *Status) GetLazyConnection() bool {
-	d.mux.Lock()
-	defer d.mux.Unlock()
+	d.mux.RLock()
+	defer d.mux.RUnlock()
 	return d.lazyConnectionEnabled
 }
 
 func (d *Status) GetManagementState() ManagementState {
-	d.mux.Lock()
-	defer d.mux.Unlock()
+	d.mux.RLock()
+	defer d.mux.RUnlock()
 	return ManagementState{
 		d.mgmAddress,
 		d.managementState,
@@ -951,8 +991,8 @@ func (d *Status) UpdateLatency(pubKey string, latency time.Duration) error {
 
 // IsLoginRequired determines if a peer's login has expired.
 func (d *Status) IsLoginRequired() bool {
-	d.mux.Lock()
-	defer d.mux.Unlock()
+	d.mux.RLock()
+	defer d.mux.RUnlock()
 
 	// if peer is connected to the management then login is not expired
 	if d.managementState {
@@ -967,8 +1007,8 @@ func (d *Status) IsLoginRequired() bool {
 }
 
 func (d *Status) GetSignalState() SignalState {
-	d.mux.Lock()
-	defer d.mux.Unlock()
+	d.mux.RLock()
+	defer d.mux.RUnlock()
 	return SignalState{
 		d.signalAddress,
 		d.signalState,
@@ -978,20 +1018,23 @@ func (d *Status) GetSignalState() SignalState {
 
 // GetRelayStates returns the stun/turn/permanent relay states
 func (d *Status) GetRelayStates() []relay.ProbeResult {
-	d.mux.Lock()
-	defer d.mux.Unlock()
+	d.mux.RLock()
+	defer d.mux.RUnlock()
 	if d.relayMgr == nil {
 		return d.relayStates
 	}
 
-	// extend the list of stun, turn servers with relay address
+	// extend the list of stun, turn servers with the relay server connections
 	relayStates := slices.Clone(d.relayStates)
 
-	// if the server connection is not established then we will use the general address
-	// in case of connection we will use the instance specific address
-	instanceAddr, _, err := d.relayMgr.RelayInstanceAddress()
-	if err != nil {
-		// TODO add their status
+	states := d.relayMgr.RelayStates()
+	if len(states) == 0 {
+		// no relay connection tracked yet; surface configured servers as
+		// unavailable with the real reconnect error when known
+		err := relayClient.ErrRelayClientNotConnected
+		if connErr := d.relayMgr.RelayConnectError(); connErr != nil {
+			err = connErr
+		}
 		for _, r := range d.relayMgr.ServerURLs() {
 			relayStates = append(relayStates, relay.ProbeResult{
 				URI: r,
@@ -1001,15 +1044,19 @@ func (d *Status) GetRelayStates() []relay.ProbeResult {
 		return relayStates
 	}
 
-	relayState := relay.ProbeResult{
-		URI: instanceAddr,
+	for _, rs := range states {
+		relayStates = append(relayStates, relay.ProbeResult{
+			URI:       rs.URL,
+			Err:       rs.Err,
+			Transport: rs.Transport,
+		})
 	}
-	return append(relayStates, relayState)
+	return relayStates
 }
 
 func (d *Status) ForwardingRules() []firewall.ForwardRule {
-	d.mux.Lock()
-	defer d.mux.Unlock()
+	d.mux.RLock()
+	defer d.mux.RUnlock()
 	if d.ingressGwMgr == nil {
 		return nil
 	}
@@ -1018,16 +1065,16 @@ func (d *Status) ForwardingRules() []firewall.ForwardRule {
 }
 
 func (d *Status) GetDNSStates() []NSGroupState {
-	d.mux.Lock()
-	defer d.mux.Unlock()
+	d.mux.RLock()
+	defer d.mux.RUnlock()
 
 	// shallow copy is good enough, as slices fields are currently not updated
 	return slices.Clone(d.nsGroupStates)
 }
 
 func (d *Status) GetResolvedDomainsStates() map[domain.Domain]ResolvedDomainInfo {
-	d.mux.Lock()
-	defer d.mux.Unlock()
+	d.mux.RLock()
+	defer d.mux.RUnlock()
 	return maps.Clone(d.resolvedDomainsStates)
 }
 
@@ -1043,8 +1090,8 @@ func (d *Status) GetFullStatus() FullStatus {
 		LazyConnectionEnabled: d.GetLazyConnection(),
 	}
 
-	d.mux.Lock()
-	defer d.mux.Unlock()
+	d.mux.RLock()
+	defer d.mux.RUnlock()
 
 	fullStatus.LocalPeerState = d.localPeer
 
@@ -1219,8 +1266,8 @@ func (d *Status) SetWgIface(wgInterface WGIfaceStatus) {
 }
 
 func (d *Status) PeersStatus() (*configurer.Stats, error) {
-	d.mux.Lock()
-	defer d.mux.Unlock()
+	d.mux.RLock()
+	defer d.mux.RUnlock()
 	if d.wgIface == nil {
 		return nil, fmt.Errorf("wgInterface is nil, cannot retrieve peers status")
 	}
@@ -1326,6 +1373,7 @@ func (fs FullStatus) ToProto() *proto.FullStatus {
 	pbFullStatus.LocalPeerState.PubKey = fs.LocalPeerState.PubKey
 	pbFullStatus.LocalPeerState.KernelInterface = fs.LocalPeerState.KernelInterface
 	pbFullStatus.LocalPeerState.Fqdn = fs.LocalPeerState.FQDN
+	pbFullStatus.LocalPeerState.WgPort = int32(fs.LocalPeerState.WgPort)
 	pbFullStatus.LocalPeerState.RosenpassPermissive = fs.RosenpassState.Permissive
 	pbFullStatus.LocalPeerState.RosenpassEnabled = fs.RosenpassState.Enabled
 	pbFullStatus.NumberOfForwardingRules = int32(fs.NumOfForwardingRules)
@@ -1364,6 +1412,7 @@ func (fs FullStatus) ToProto() *proto.FullStatus {
 		pbRelayState := &proto.RelayState{
 			URI:       relayState.URI,
 			Available: relayState.Err == nil,
+			Transport: relayState.Transport,
 		}
 		if err := relayState.Err; err != nil {
 			pbRelayState.Error = err.Error()

client/internal/peer/status_test.go

@@ -63,6 +63,72 @@ func TestUpdatePeerState(t *testing.T) {
 	assert.Equal(t, ip, state.IP, "ip should be equal")
 }
 
+func TestStatus_PeerStateByIP(t *testing.T) {
+	status := NewRecorder("https://mgm")
+	req := require.New(t)
+
+	req.NoError(status.AddPeer("pk-1", "peer-1.netbird", "100.64.0.10", ""))
+	req.NoError(status.AddPeer("pk-2", "peer-2.netbird", "100.64.0.11", ""))
+
+	state, ok := status.PeerStateByIP("100.64.0.10")
+	req.True(ok, "known tunnel IP should resolve to a peer state")
+	req.Equal("pk-1", state.PubKey, "matching state must carry the right pub key")
+	req.Equal("peer-1.netbird", state.FQDN, "matching state must carry the right FQDN")
+
+	_, ok = status.PeerStateByIP("100.64.0.99")
+	req.False(ok, "unknown IP must report ok=false")
+}
+
+func TestStatus_PeerStateByIP_MatchesIPv6(t *testing.T) {
+	status := NewRecorder("https://mgm")
+	req := require.New(t)
+
+	req.NoError(status.AddPeer("pk-1", "peer-1.netbird", "100.64.0.10", "fd00::1"))
+
+	state, ok := status.PeerStateByIP("fd00::1")
+	req.True(ok, "IPv6-only match must resolve to the peer state")
+	req.Equal("pk-1", state.PubKey, "matching state must carry the right pub key")
+}
+
+// TestStatus_PeerStateByIP_IgnoresOfflinePeers documents that peers
+// moved into the offline slice via ReplaceOfflinePeers are intentionally
+// not resolvable by IP: only active peers can carry traffic, so callers
+// (DNS filter, embed.Client.IdentityForIP) treat them as unknown.
+func TestStatus_PeerStateByIP_IgnoresOfflinePeers(t *testing.T) {
+	status := NewRecorder("https://mgm")
+	req := require.New(t)
+
+	status.ReplaceOfflinePeers([]State{
+		{PubKey: "pk-offline", FQDN: "offline.netbird", IP: "100.64.0.20", IPv6: "fd00::20"},
+	})
+
+	_, ok := status.PeerStateByIP("100.64.0.20")
+	req.False(ok, "offline peer must not resolve by IPv4 tunnel address")
+
+	_, ok = status.PeerStateByIP("fd00::20")
+	req.False(ok, "offline peer must not resolve by IPv6 tunnel address")
+}
+
+// TestStatus_PeerStateByIP_RemovedPeer verifies RemovePeer drops the
+// IP index entries for both address families.
+func TestStatus_PeerStateByIP_RemovedPeer(t *testing.T) {
+	status := NewRecorder("https://mgm")
+	req := require.New(t)
+
+	req.NoError(status.AddPeer("pk-1", "peer-1.netbird", "100.64.0.10", "fd00::1"))
+
+	_, ok := status.PeerStateByIP("100.64.0.10")
+	req.True(ok, "active peer must resolve before removal")
+
+	req.NoError(status.RemovePeer("pk-1"))
+
+	_, ok = status.PeerStateByIP("100.64.0.10")
+	req.False(ok, "removed peer must not resolve by IPv4 tunnel address")
+
+	_, ok = status.PeerStateByIP("fd00::1")
+	req.False(ok, "removed peer must not resolve by IPv6 tunnel address")
+}
+
 func TestStatus_UpdatePeerFQDN(t *testing.T) {
 	key := "abc"
 	fqdn := "peer-a.netbird.local"

client/internal/peer/worker_ice.go

@@ -4,7 +4,6 @@ import (
 	"context"
 	"fmt"
 	"net"
-	"net/netip"
 	"strconv"
 	"sync"
 	"time"
@@ -165,10 +164,6 @@ func (w *WorkerICE) OnRemoteCandidate(candidate ice.Candidate, haRoutes route.HA
 		return
 	}
 
-	if candidateViaRoutes(candidate, haRoutes) {
-		return
-	}
-
 	if err := w.agent.AddRemoteCandidate(candidate); err != nil {
 		w.log.Errorf("error while handling remote candidate")
 		return
@@ -589,34 +584,6 @@ func extraSrflxCandidate(candidate ice.Candidate) (*ice.CandidateServerReflexive
 	return ec, nil
 }
 
-func candidateViaRoutes(candidate ice.Candidate, clientRoutes route.HAMap) bool {
-	addr, err := netip.ParseAddr(candidate.Address())
-	if err != nil {
-		log.Errorf("Failed to parse IP address %s: %v", candidate.Address(), err)
-		return false
-	}
-
-	var routePrefixes []netip.Prefix
-	for _, routes := range clientRoutes {
-		if len(routes) > 0 && routes[0] != nil {
-			routePrefixes = append(routePrefixes, routes[0].Network)
-		}
-	}
-
-	for _, prefix := range routePrefixes {
-		// default route is handled by route exclusion / ip rules
-		if prefix.Bits() == 0 {
-			continue
-		}
-
-		if prefix.Contains(addr) {
-			log.Debugf("Ignoring candidate [%s], its address is part of routed network %s", candidate.String(), prefix)
-			return true
-		}
-	}
-	return false
-}
-
 func isRelayCandidate(candidate ice.Candidate) bool {
 	return candidate.Type() == ice.CandidateTypeRelay
 }

client/internal/portforward/pcp/nat.go

@@ -179,8 +179,10 @@ func getDefaultGateway() (gateway net.IP, localIP net.IP, err error) {
 	}
 
 	dst := net.IPv4zero
-	if runtime.GOOS == "linux" {
-		// go-netroute v0.4.0 rejects unspecified destinations client-side on Linux.
+	if runtime.GOOS == "linux" || runtime.GOOS == "android" {
+		// go-netroute v0.4.0 rejects unspecified destinations client-side on Linux/Android.
+		// TODO: on android/ios, use platform APIs (ConnectivityManager.getLinkProperties /
+		// NWPathMonitor) when netlink-based lookup is restricted or unavailable.
 		dst = net.IPv4(0, 0, 0, 1)
 	}
 	_, gateway, localIP, err = router.Route(dst)
@@ -203,7 +205,7 @@ func getDefaultGateway6() (gateway net.IP, localIP net.IP, err error) {
 	}
 
 	dst := net.IPv6zero
-	if runtime.GOOS == "linux" {
+	if runtime.GOOS == "linux" || runtime.GOOS == "android" {
 		// ::2
 		dst = net.IP{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 2}
 	}

client/internal/profilemanager/config.go

@@ -22,6 +22,7 @@ import (
 
 	"github.com/netbirdio/netbird/client/iface"
 	"github.com/netbirdio/netbird/client/internal/routemanager/dynamic"
+	"github.com/netbirdio/netbird/client/mdm"
 	"github.com/netbirdio/netbird/client/ssh"
 	mgm "github.com/netbirdio/netbird/shared/management/client"
 	"github.com/netbirdio/netbird/shared/management/domain"
@@ -57,6 +58,10 @@ var DefaultInterfaceBlacklist = []string{
 	"Tailscale", "tailscale", "docker", "veth", "br-", "lo",
 }
 
+// loadMDMPolicy is the package-level indirection used by apply() to read the
+// active MDM policy. Tests override this to inject a fake policy.
+var loadMDMPolicy = mdm.LoadPolicy
+
 // ConfigInput carries configuration changes to the client
 type ConfigInput struct {
 	ManagementURL                 string
@@ -103,6 +108,10 @@ type ConfigInput struct {
 
 // Config Configuration type
 type Config struct {
+	// Name is the human-readable profile name shown in CLI/UI listings.
+	// It is independent of the profile's on-disk filename (which is the ID).
+	Name string
+
 	// Wireguard private key of local peer
 	PrivateKey                    string
 	PreSharedKey                  string
@@ -174,6 +183,23 @@ type Config struct {
 	LazyConnectionEnabled bool
 
 	MTU uint16
+
+	// policy is the MDM policy that produced the currently-set values for
+	// any MDM-enforced fields. Set by applyMDMPolicy at the tail of apply()
+	// and reset on every apply() invocation. Never persisted to disk.
+	// Callers query enforcement state via Policy() and the mdm.Policy API
+	// (HasKey, ManagedKeys, IsEmpty).
+	policy *mdm.Policy `json:"-"`
+}
+
+// Policy returns the MDM policy applied to this Config. Returns a non-nil
+// empty Policy when MDM enforcement is inactive; callers can always invoke
+// HasKey / ManagedKeys / IsEmpty without a nil check.
+func (config *Config) Policy() *mdm.Policy {
+	if config == nil || config.policy == nil {
+		return mdm.NewPolicy(nil)
+	}
+	return config.policy
 }
 
 var ConfigDirOverride string
@@ -248,6 +274,16 @@ func createNewConfig(input ConfigInput) (*Config, error) {
 }
 
 func (config *Config) apply(input ConfigInput) (updated bool, err error) {
+	if config.Name != "" {
+		sanitized, err := sanitizeDisplayName(config.Name)
+		if err != nil {
+			return false, fmt.Errorf("invalid profile name: %w", err)
+		}
+		if sanitized != config.Name {
+			config.Name = sanitized
+			updated = true
+		}
+	}
 	if config.ManagementURL == nil {
 		log.Infof("using default Management URL %s", DefaultManagementURL)
 		config.ManagementURL, err = parseURL("Management URL", DefaultManagementURL)
@@ -612,10 +648,93 @@ func (config *Config) apply(input ConfigInput) (updated bool, err error) {
 		updated = true
 	}
 
+	// MDM is the last override layer: any key present in the policy
+	// supersedes defaults, on-disk config, env vars and CLI input.
+	config.applyMDMPolicy(loadMDMPolicy())
+
 	return updated, nil
 }
 
-// parseURL parses and validates a service URL
+// applyMDMPolicy overlays MDM-supplied values on top of the resolved Config.
+// The provided Policy is also stored on the Config so callers can later query
+// which fields are enforced. Invalid values (e.g. malformed URLs) are logged
+// and skipped to avoid bricking the client; the field keeps its previous
+// resolved value but is still marked as managed (Policy.HasKey returns true
+// for the key, so per-field rejection of user writes still applies).
+func (config *Config) applyMDMPolicy(policy *mdm.Policy) {
+	config.policy = policy
+	if policy.IsEmpty() {
+		return
+	}
+
+	// Helper: log the application of a single MDM-managed key. Values for
+	// keys in mdm.SecretKeys are redacted.
+	logApplied := func(key string, displayValue any) {
+		if _, secret := mdm.SecretKeys[key]; secret {
+			log.Infof("MDM override %s = ********** (secret)", key)
+			return
+		}
+		log.Infof("MDM override %s = %v", key, displayValue)
+	}
+
+	if v, ok := policy.GetString(mdm.KeyManagementURL); ok {
+		if u, err := parseURL("Management URL", v); err != nil {
+			log.Warnf("MDM management URL %q invalid: %v; keeping previous value", v, err)
+		} else {
+			config.ManagementURL = u
+			logApplied(mdm.KeyManagementURL, u.String())
+		}
+	}
+
+	if v, ok := policy.GetString(mdm.KeyPreSharedKey); ok {
+		// Defensive: refuse the redaction mask in case it round-tripped
+		// through a manifest by mistake.
+		if !isPreSharedKeyHidden(&v) {
+			config.PreSharedKey = v
+			logApplied(mdm.KeyPreSharedKey, "")
+		}
+	}
+
+	// applyBool collapses the per-key "read + set + log" boilerplate
+	// for every plain bool MDM key into a single helper. Keeps the
+	// outer function's cognitive complexity below SonarCube's
+	// threshold; functional behaviour is identical to the inlined
+	// branches it replaces.
+	applyBool := func(key string, setter func(bool)) {
+		v, ok := policy.GetBool(key)
+		if !ok {
+			return
+		}
+		setter(v)
+		logApplied(key, v)
+	}
+
+	applyBool(mdm.KeyAllowServerSSH, func(v bool) { bv := v; config.ServerSSHAllowed = &bv })
+	applyBool(mdm.KeyDisableClientRoutes, func(v bool) { config.DisableClientRoutes = v })
+	applyBool(mdm.KeyDisableServerRoutes, func(v bool) { config.DisableServerRoutes = v })
+	applyBool(mdm.KeyBlockInbound, func(v bool) { config.BlockInbound = v })
+	applyBool(mdm.KeyDisableAutoConnect, func(v bool) { config.DisableAutoConnect = v })
+	applyBool(mdm.KeyRosenpassEnabled, func(v bool) { config.RosenpassEnabled = v })
+	applyBool(mdm.KeyRosenpassPermissive, func(v bool) { config.RosenpassPermissive = v })
+
+	if v, ok := policy.GetInt(mdm.KeyWireguardPort); ok {
+		// REG_DWORD is 32-bit; UDP port range is 1-65535. Clamp at the
+		// upper bound and reject obviously-invalid values to avoid the
+		// engine binding to an unusable port if the admin pushes garbage.
+		if v >= 1 && v <= 65535 {
+			config.WgPort = int(v)
+			logApplied(mdm.KeyWireguardPort, v)
+		} else {
+			log.Warnf("MDM wireguard port %d out of range [1,65535]; keeping previous value", v)
+		}
+	}
+}
+
+// parseURL parses and validates the URL for the named service. The URL
+// must use the http or https scheme; if no port is present, ":443" is
+// appended for https or ":80" for http. The serviceName parameter is
+// used to contextualise error messages. On success returns the parsed
+// *url.URL; on failure returns a non-nil error.
 func parseURL(serviceName, serviceURL string) (*url.URL, error) {
 	parsedMgmtURL, err := url.ParseRequestURI(serviceURL)
 	if err != nil {

client/internal/profilemanager/config_mdm_test.go

@@ -0,0 +1,152 @@
+package profilemanager
+
+import (
+	"path/filepath"
+	"testing"
+
+	"github.com/stretchr/testify/assert"
+	"github.com/stretchr/testify/require"
+
+	"github.com/netbirdio/netbird/client/mdm"
+)
+
+// withMDMPolicy temporarily overrides the package-level loadMDMPolicy hook so
+// apply() observes the supplied Policy. The original loader is restored at
+// test cleanup.
+func withMDMPolicy(t *testing.T, policy *mdm.Policy) {
+	t.Helper()
+	prev := loadMDMPolicy
+	loadMDMPolicy = func() *mdm.Policy { return policy }
+	t.Cleanup(func() { loadMDMPolicy = prev })
+}
+
+func TestApply_MDMEmpty_NoEnforcement(t *testing.T) {
+	withMDMPolicy(t, mdm.NewPolicy(nil))
+
+	cfg, err := UpdateOrCreateConfig(ConfigInput{
+		ConfigPath: filepath.Join(t.TempDir(), "config.json"),
+	})
+	require.NoError(t, err)
+	require.NotNil(t, cfg)
+
+	assert.True(t, cfg.Policy().IsEmpty(), "no MDM source ⇒ empty Policy")
+	assert.False(t, cfg.Policy().HasKey(mdm.KeyManagementURL))
+	assert.Empty(t, cfg.Policy().ManagedKeys())
+
+	// Default management URL still resolves.
+	assert.Equal(t, DefaultManagementURL, cfg.ManagementURL.String())
+}
+
+func TestApply_MDMOnly_OverridesDefaults(t *testing.T) {
+	const mdmURL = "https://corp.mdm.example.com:443"
+	withMDMPolicy(t, mdm.NewPolicy(map[string]any{
+		mdm.KeyManagementURL:       mdmURL,
+		mdm.KeyDisableClientRoutes: true,
+		mdm.KeyBlockInbound:        true,
+	}))
+
+	cfg, err := UpdateOrCreateConfig(ConfigInput{
+		ConfigPath: filepath.Join(t.TempDir(), "config.json"),
+	})
+	require.NoError(t, err)
+	require.NotNil(t, cfg)
+
+	assert.Equal(t, mdmURL, cfg.ManagementURL.String())
+	assert.True(t, cfg.DisableClientRoutes)
+	assert.True(t, cfg.BlockInbound)
+
+	assert.True(t, cfg.Policy().HasKey(mdm.KeyManagementURL))
+	assert.True(t, cfg.Policy().HasKey(mdm.KeyDisableClientRoutes))
+	assert.True(t, cfg.Policy().HasKey(mdm.KeyBlockInbound))
+	assert.False(t, cfg.Policy().HasKey(mdm.KeyAllowServerSSH))
+}
+
+func TestApply_MDMBeatsCLIInput(t *testing.T) {
+	const mdmURL = "https://mdm.example.com:443"
+	const cliURL = "https://cli.example.com:443"
+
+	withMDMPolicy(t, mdm.NewPolicy(map[string]any{
+		mdm.KeyManagementURL: mdmURL,
+	}))
+
+	cfg, err := UpdateOrCreateConfig(ConfigInput{
+		ConfigPath:    filepath.Join(t.TempDir(), "config.json"),
+		ManagementURL: cliURL,
+	})
+	require.NoError(t, err)
+	require.NotNil(t, cfg)
+
+	// MDM wins over CLI-supplied management URL.
+	assert.Equal(t, mdmURL, cfg.ManagementURL.String())
+	assert.True(t, cfg.Policy().HasKey(mdm.KeyManagementURL))
+}
+
+func TestApply_MDMInvalidURL_KeepsPreviousValue(t *testing.T) {
+	withMDMPolicy(t, mdm.NewPolicy(map[string]any{
+		mdm.KeyManagementURL: "not-a-url",
+	}))
+
+	cfg, err := UpdateOrCreateConfig(ConfigInput{
+		ConfigPath: filepath.Join(t.TempDir(), "config.json"),
+	})
+	require.NoError(t, err)
+	require.NotNil(t, cfg)
+
+	// Invalid MDM URL is logged and skipped: default URL stays in place
+	// to keep the client functional.
+	assert.Equal(t, DefaultManagementURL, cfg.ManagementURL.String())
+
+	// But the key is still considered MDM-managed (admin intent is to
+	// enforce, daemon rejects user writes to this field — phase-1 scaffolding
+	// reflects this by keeping Policy.HasKey true even on parse failure).
+	assert.True(t, cfg.Policy().HasKey(mdm.KeyManagementURL))
+}
+
+func TestApply_MDMBoolKeysOverrideOnDiskValue(t *testing.T) {
+	tmp := filepath.Join(t.TempDir(), "config.json")
+
+	// Seed without MDM.
+	withMDMPolicy(t, mdm.NewPolicy(nil))
+	_, err := UpdateOrCreateConfig(ConfigInput{
+		ConfigPath:          tmp,
+		DisableClientRoutes: boolPtr(false),
+		RosenpassEnabled:    boolPtr(false),
+	})
+	require.NoError(t, err)
+
+	// Now enable MDM enforcement for these keys.
+	withMDMPolicy(t, mdm.NewPolicy(map[string]any{
+		mdm.KeyDisableClientRoutes: true,
+		mdm.KeyRosenpassEnabled:    true,
+	}))
+
+	cfg, err := UpdateOrCreateConfig(ConfigInput{ConfigPath: tmp})
+	require.NoError(t, err)
+	require.NotNil(t, cfg)
+
+	assert.True(t, cfg.DisableClientRoutes, "MDM override should flip on-disk false to true")
+	assert.True(t, cfg.RosenpassEnabled)
+	assert.True(t, cfg.Policy().HasKey(mdm.KeyDisableClientRoutes))
+	assert.True(t, cfg.Policy().HasKey(mdm.KeyRosenpassEnabled))
+}
+
+func TestApply_MDMPreSharedKeyRedactionSentinelRejected(t *testing.T) {
+	const maskSentinel = "**********"
+
+	withMDMPolicy(t, mdm.NewPolicy(map[string]any{
+		mdm.KeyPreSharedKey: maskSentinel,
+	}))
+
+	cfg, err := UpdateOrCreateConfig(ConfigInput{
+		ConfigPath: filepath.Join(t.TempDir(), "config.json"),
+	})
+	require.NoError(t, err)
+	require.NotNil(t, cfg)
+
+	// Mask sentinel must not be persisted as the actual PSK.
+	assert.NotEqual(t, maskSentinel, cfg.PreSharedKey)
+	// Key still marked managed so user writes are still rejected.
+	assert.True(t, cfg.Policy().HasKey(mdm.KeyPreSharedKey))
+}
+
+func boolPtr(b bool) *bool { return &b }

client/internal/profilemanager/id.go

@@ -0,0 +1,118 @@
+package profilemanager
+
+import (
+	"crypto/rand"
+	"encoding/hex"
+	"fmt"
+	"path/filepath"
+	"strings"
+	"unicode"
+	"unicode/utf8"
+)
+
+const (
+	// profileIDByteLen is the number of random bytes generated for a new
+	// profile ID. The resulting hex string is twice this length.
+	profileIDByteLen = 16
+
+	// shortIDLen is the number of leading characters of an ID we render in
+	// list output. Profiles per device are few, so 8 chars is collision-safe
+	// in practice and easy to type as a prefix.
+	shortIDLen = 8
+
+	// maxProfileNameLen caps the human-readable profile name to keep table
+	// output legible and prevent denial-of-service via huge JSON fields.
+	maxProfileNameLen = 128
+
+	// maxProfileIDLen bounds the on-disk filename we'll accept. New
+	// IDs are 32 hex chars, legacy stems are sanitized profile names. The
+	// cap is generous enough to cover both without permitting absurdly
+	// long filenames.
+	maxProfileIDLen = 64
+)
+
+type ID string
+
+// generateProfileID returns a new random hex ID for a profile file.
+func generateProfileID() (ID, error) {
+	buf := make([]byte, profileIDByteLen)
+	if _, err := rand.Read(buf); err != nil {
+		return "", fmt.Errorf("read random bytes: %w", err)
+	}
+	return ID(hex.EncodeToString(buf)), nil
+}
+
+// IsValidProfileFilenameStem reports whether id is safe to use as the stem
+// of a profile JSON filename.
+func IsValidProfileFilenameStem(id ID) bool {
+	s := id.String()
+	if s == "" || len(s) > maxProfileIDLen {
+		return false
+	}
+	if s == defaultProfileName {
+		return true
+	}
+	if strings.ContainsAny(s, `/\`) || strings.Contains(s, "..") {
+		return false
+	}
+	// filepath.Base catches any leftover separators on platforms with
+	// exotic path conventions.
+	if filepath.Base(s) != s {
+		return false
+	}
+	for _, r := range s {
+		if !(unicode.IsLetter(r) || unicode.IsDigit(r) || r == '_' || r == '-') {
+			return false
+		}
+	}
+	return true
+}
+
+// sanitizeDisplayName normalizes a user-supplied profile display name for
+// storage. It strips ASCII control characters, rejects invalid UTF-8, and
+// caps the length. Emojis, spaces, punctuation, and non-ASCII letters are
+// preserved. Returns an error if nothing usable remains.
+func sanitizeDisplayName(name string) (string, error) {
+	if !utf8.ValidString(name) {
+		return "", fmt.Errorf("name is not valid UTF-8")
+	}
+	name = StripCtrlChars(name)
+	name = strings.TrimSpace(name)
+	if name == "" {
+		return "", fmt.Errorf("name is empty after sanitization")
+	}
+	if utf8.RuneCountInString(name) > maxProfileNameLen {
+		return "", fmt.Errorf("name exceeds %d characters", maxProfileNameLen)
+	}
+	return name, nil
+}
+
+// StripCtrlChars control characters from a name before printing it.
+func StripCtrlChars(name string) string {
+	var b strings.Builder
+	b.Grow(len(name))
+	for _, r := range name {
+		// Skip C0 controls and DEL, plus C1 controls (0x80–0x9F).
+		if r < 0x20 || r == 0x7F || (r >= 0x80 && r <= 0x9F) {
+			continue
+		}
+		b.WriteRune(r)
+	}
+	return b.String()
+}
+
+// ShortID truncates an ID for display.
+func (id ID) ShortID() string {
+	if id == DefaultProfileName {
+		return DefaultProfileName
+	}
+	runes := []rune(id)
+	if len(runes) <= shortIDLen {
+		return id.String()
+	}
+	return string(runes[:shortIDLen])
+}
+
+func (id ID) String() string {
+	return string(id)
+}

client/internal/profilemanager/profilemanager.go

@@ -19,19 +19,41 @@ const (
 )
 
 type Profile struct {
-	Name     string
+	// ID is the on-disk filename stem (without .json). For new profiles
+	// it is a 32-char hex string; legacy profiles created before the
+	// ID-keyed layout keep their original name as their ID. The reserved
+	// value "default" identifies the special default profile.
+	ID ID
+	// Name is the human-readable display name. Falls back to ID when the
+	// underlying JSON has no "name" field set.
+	Name string
+	// Path is the absolute path to the profile JSON. Populated by the
+	// loader so callers do not have to reconstruct it from ID + dir.
+	Path     string
 	IsActive bool
 }
 
 func (p *Profile) FilePath() (string, error) {
-	if p.Name == "" {
-		return "", fmt.Errorf("active profile name is empty")
+	if p.Path != "" {
+		return p.Path, nil
 	}
 
-	if p.Name == defaultProfileName {
+	id := p.ID
+	if id == "" {
+		id = ID(p.Name)
+	}
+	if id == "" {
+		return "", fmt.Errorf("profile ID is empty")
+	}
+
+	if id == defaultProfileName {
 		return DefaultConfigPath, nil
 	}
 
+	if !IsValidProfileFilenameStem(id) {
+		return "", fmt.Errorf("invalid profile ID: %q", id)
+	}
+
 	username, err := user.Current()
 	if err != nil {
 		return "", fmt.Errorf("failed to get current user: %w", err)
@@ -42,10 +64,13 @@ func (p *Profile) FilePath() (string, error) {
 		return "", fmt.Errorf("failed to get config directory for user %s: %w", username.Username, err)
 	}
 
-	return filepath.Join(configDir, p.Name+".json"), nil
+	return filepath.Join(configDir, id.String()+".json"), nil
 }
 
 func (p *Profile) IsDefault() bool {
+	if p.ID != "" {
+		return p.ID == defaultProfileName
+	}
 	return p.Name == defaultProfileName
 }
 
@@ -57,18 +82,24 @@ func NewProfileManager() *ProfileManager {
 	return &ProfileManager{}
 }
 
+// GetActiveProfile returns the active profile as recorded in the local
+// user state file. Only ID is populated.
 func (pm *ProfileManager) GetActiveProfile() (*Profile, error) {
 	pm.mu.Lock()
 	defer pm.mu.Unlock()
 
-	prof := pm.getActiveProfileState()
-	return &Profile{Name: prof}, nil
+	id := pm.getActiveProfileState()
+	return &Profile{ID: id}, nil
 }
 
-func (pm *ProfileManager) SwitchProfile(profileName string) error {
-	profileName = sanitizeProfileName(profileName)
+// SwitchProfile records the given profile ID as active in the local user
+// state file.
+func (pm *ProfileManager) SwitchProfile(id ID) error {
+	if id != defaultProfileName && !IsValidProfileFilenameStem(id) {
+		return fmt.Errorf("invalid profile ID: %q", id)
+	}
 
-	if err := pm.setActiveProfileState(profileName); err != nil {
+	if err := pm.setActiveProfileState(id); err != nil {
 		return fmt.Errorf("failed to switch profile: %w", err)
 	}
 	return nil
@@ -85,7 +116,7 @@ func sanitizeProfileName(name string) string {
 	}, name)
 }
 
-func (pm *ProfileManager) getActiveProfileState() string {
+func (pm *ProfileManager) getActiveProfileState() ID {
 
 	configDir, err := getConfigDir()
 	if err != nil {
@@ -113,10 +144,10 @@ func (pm *ProfileManager) getActiveProfileState() string {
 		return defaultProfileName
 	}
 
-	return profileName
+	return ID(profileName)
 }
 
-func (pm *ProfileManager) setActiveProfileState(profileName string) error {
+func (pm *ProfileManager) setActiveProfileState(id ID) error {
 
 	configDir, err := getConfigDir()
 	if err != nil {
@@ -125,7 +156,7 @@ func (pm *ProfileManager) setActiveProfileState(profileName string) error {
 
 	statePath := filepath.Join(configDir, activeProfileStateFilename)
 
-	err = os.WriteFile(statePath, []byte(profileName), 0600)
+	err = os.WriteFile(statePath, []byte(id), 0600)
 	if err != nil {
 		return fmt.Errorf("failed to write active profile state: %w", err)
 	}
@@ -142,7 +173,7 @@ func GetLoginHint() string {
 		return ""
 	}
 
-	profileState, err := pm.GetProfileState(activeProf.Name)
+	profileState, err := pm.GetProfileState(activeProf.ID)
 	if err != nil {
 		log.Debugf("failed to get profile state for login hint: %v", err)
 		return ""

client/internal/profilemanager/profilemanager_test.go

@@ -50,14 +50,14 @@ func TestServiceManager_CreateAndGetDefaultProfile(t *testing.T) {
 
 			state, err := sm.GetActiveProfileState()
 			assert.NoError(t, err)
-			assert.Equal(t, state.Name, defaultProfileName) // No active profile state yet
+			assert.Equal(t, defaultProfileName, state.ID.String()) // No active profile state yet
 
 			err = sm.SetActiveProfileStateToDefault()
 			assert.NoError(t, err)
 
 			active, err := sm.GetActiveProfileState()
 			assert.NoError(t, err)
-			assert.Equal(t, "default", active.Name)
+			assert.Equal(t, "default", active.ID.String())
 		})
 	})
 }
@@ -92,14 +92,14 @@ func TestServiceManager_SetActiveProfileState(t *testing.T) {
 			currUser, err := user.Current()
 			assert.NoError(t, err)
 			sm := &ServiceManager{}
-			state := &ActiveProfileState{Name: "foo", Username: currUser.Username}
+			state := &ActiveProfileState{ID: "foo", Username: currUser.Username}
 			err = sm.SetActiveProfileState(state)
 			assert.NoError(t, err)
 
 			// Should error on nil or incomplete state
 			err = sm.SetActiveProfileState(nil)
 			assert.Error(t, err)
-			err = sm.SetActiveProfileState(&ActiveProfileState{Name: "", Username: ""})
+			err = sm.SetActiveProfileState(&ActiveProfileState{ID: "", Username: ""})
 			assert.Error(t, err)
 		})
 	})

client/internal/profilemanager/service.go

@@ -2,6 +2,7 @@ package profilemanager
 
 import (
 	"context"
+	"encoding/json"
 	"errors"
 	"fmt"
 	"io"
@@ -23,12 +24,43 @@ var (
 	DefaultConfigPathDir   = ""
 	DefaultConfigPath      = ""
 	ActiveProfileStatePath = ""
-)
 
-var (
 	ErrorOldDefaultConfigNotFound = errors.New("old default config not found")
 )
 
+// ErrAmbiguousHandle is returned when a profile handle (ID prefix or name)
+// matches more than one profile. Callers can render Candidates to help the
+// user disambiguate.
+type ErrAmbiguousHandle struct {
+	Handle     string
+	Candidates []Profile
+	Kind       AmbiguityKind
+}
+
+// AmbiguityKind describes which matcher produced the ambiguity, so callers
+// can tailor the error message.
+type AmbiguityKind int
+
+const (
+	AmbiguityKindIDPrefix AmbiguityKind = iota
+	AmbiguityKindName
+)
+
+// profileMeta is the minimal slice of a profile JSON we need, so we avoid
+// reading all fields
+type profileMeta struct {
+	Name string
+}
+
+func (e *ErrAmbiguousHandle) Error() string {
+	switch e.Kind {
+	case AmbiguityKindIDPrefix:
+		return fmt.Sprintf("ID prefix %q is ambiguous (matches %d profiles)", e.Handle, len(e.Candidates))
+	default:
+		return fmt.Sprintf("name %q is ambiguous (%d profiles share this name)", e.Handle, len(e.Candidates))
+	}
+}
+
 func init() {
 
 	DefaultConfigPathDir = "/var/lib/netbird/"
@@ -54,25 +86,34 @@ func init() {
 }
 
 type ActiveProfileState struct {
-	Name     string `json:"name"`
+	// ID is the on-disk filename stem of the active profile. The JSON tag stays
+	// as "name" for backwards compatibility with active state files written
+	// before the ID-based config files. Legacy values were profile names, which
+	// were also the legacy filename stems, so they still resolve to the correct
+	// file on disk.
+	ID       ID     `json:"name"`
 	Username string `json:"username"`
 }
 
 func (a *ActiveProfileState) FilePath() (string, error) {
-	if a.Name == "" {
-		return "", fmt.Errorf("active profile name is empty")
+	if a.ID == "" {
+		return "", fmt.Errorf("active profile ID is empty")
 	}
 
-	if a.Name == defaultProfileName {
+	if a.ID == defaultProfileName {
 		return DefaultConfigPath, nil
 	}
 
+	if !IsValidProfileFilenameStem(a.ID) {
+		return "", fmt.Errorf("invalid profile ID: %q", a.ID)
+	}
+
 	configDir, err := getConfigDirForUser(a.Username)
 	if err != nil {
 		return "", fmt.Errorf("failed to get config directory for user %s: %w", a.Username, err)
 	}
 
-	return filepath.Join(configDir, a.Name+".json"), nil
+	return filepath.Join(configDir, a.ID.String()+".json"), nil
 }
 
 type ServiceManager struct {
@@ -178,7 +219,7 @@ func (s *ServiceManager) GetActiveProfileState() (*ActiveProfileState, error) {
 				return nil, fmt.Errorf("failed to set active profile to default: %w", err)
 			}
 			return &ActiveProfileState{
-				Name:     "default",
+				ID:       defaultProfileName,
 				Username: "",
 			}, nil
 		} else {
@@ -186,12 +227,12 @@ func (s *ServiceManager) GetActiveProfileState() (*ActiveProfileState, error) {
 		}
 	}
 
-	if activeProfile.Name == "" {
+	if activeProfile.ID == "" {
 		if err := s.SetActiveProfileStateToDefault(); err != nil {
 			return nil, fmt.Errorf("failed to set active profile to default: %w", err)
 		}
 		return &ActiveProfileState{
-			Name:     "default",
+			ID:       defaultProfileName,
 			Username: "",
 		}, nil
 	}
@@ -216,25 +257,29 @@ func (s *ServiceManager) setDefaultActiveState() error {
 }
 
 func (s *ServiceManager) SetActiveProfileState(a *ActiveProfileState) error {
-	if a == nil || a.Name == "" {
+	if a == nil || a.ID == "" {
 		return errors.New("invalid active profile state")
 	}
 
-	if a.Name != defaultProfileName && a.Username == "" {
-		return fmt.Errorf("username must be set for non-default profiles, got: %s", a.Name)
+	if a.ID != defaultProfileName && a.Username == "" {
+		return fmt.Errorf("username must be set for non-default profiles, got: %s", a.ID)
+	}
+
+	if a.ID != defaultProfileName && !IsValidProfileFilenameStem(a.ID) {
+		return fmt.Errorf("invalid profile ID: %q", a.ID)
 	}
 
 	if err := util.WriteJsonWithRestrictedPermission(context.Background(), ActiveProfileStatePath, a); err != nil {
 		return fmt.Errorf("failed to write active profile state: %w", err)
 	}
 
-	log.Infof("active profile set to %s for %s", a.Name, a.Username)
+	log.Infof("active profile set to %s for %s", a.ID, a.Username)
 	return nil
 }
 
 func (s *ServiceManager) SetActiveProfileStateToDefault() error {
 	return s.SetActiveProfileState(&ActiveProfileState{
-		Name:     "default",
+		ID:       defaultProfileName,
 		Username: "",
 	})
 }
@@ -243,57 +288,117 @@ func (s *ServiceManager) DefaultProfilePath() string {
 	return DefaultConfigPath
 }
 
-func (s *ServiceManager) AddProfile(profileName, username string) error {
+// AddProfile creates a new profile with a generated ID. The user-supplied
+// displayName is stored inside the JSON's name field, the on-disk filename
+// uses the generated ID.
+//
+// The returned Profile carries the freshly-generated ID so callers can
+// show it to the user (and so the gRPC AddProfileResponse can include
+// it).
+func (s *ServiceManager) AddProfile(displayName, username string) (*Profile, error) {
 	configDir, err := s.getConfigDir(username)
 	if err != nil {
-		return fmt.Errorf("failed to get config directory: %w", err)
+		return nil, fmt.Errorf("failed to get config directory: %w", err)
 	}
 
-	profileName = sanitizeProfileName(profileName)
-
-	if profileName == defaultProfileName {
-		return fmt.Errorf("cannot create profile with reserved name: %s", defaultProfileName)
-	}
-
-	profPath := filepath.Join(configDir, profileName+".json")
-	profileExists, err := fileExists(profPath)
+	displayName, err = sanitizeDisplayName(displayName)
 	if err != nil {
-		return fmt.Errorf("failed to check if profile exists: %w", err)
-	}
-	if profileExists {
-		return ErrProfileAlreadyExists
+		return nil, fmt.Errorf("invalid profile name: %w", err)
 	}
 
+	id, err := generateProfileID()
+	if err != nil {
+		return nil, fmt.Errorf("generate profile id: %w", err)
+	}
+
+	profPath := filepath.Join(configDir, id.String()+".json")
 	cfg, err := createNewConfig(ConfigInput{ConfigPath: profPath})
 	if err != nil {
-		return fmt.Errorf("failed to create new config: %w", err)
+		return nil, fmt.Errorf("failed to create new config: %w", err)
+	}
+	cfg.Name = displayName
+
+	if err := util.WriteJson(context.Background(), profPath, cfg); err != nil {
+		return nil, fmt.Errorf("failed to write profile config: %w", err)
 	}
 
-	err = util.WriteJson(context.Background(), profPath, cfg)
+	return &Profile{
+		ID:   id,
+		Name: displayName,
+		Path: profPath,
+	}, nil
+}
+
+func (s *ServiceManager) RenameProfile(id ID, username string, newName string) error {
+	displayName, err := sanitizeDisplayName(newName)
 	if err != nil {
-		return fmt.Errorf("failed to write profile config: %w", err)
+		return fmt.Errorf("invalid profile name: %w", err)
 	}
 
+	if !IsValidProfileFilenameStem(id) {
+		return fmt.Errorf("invalid profile ID: %q", id)
+	}
+
+	profiles, err := s.loadAllProfiles(username)
+	if err != nil {
+		return fmt.Errorf("load profiles: %w", err)
+	}
+
+	var target *Profile
+	for i := range profiles {
+		if profiles[i].ID == id {
+			target = &profiles[i]
+			break
+		}
+	}
+	if target == nil {
+		return ErrProfileNotFound
+	}
+
+	data, err := os.ReadFile(target.Path)
+	if err != nil {
+		return err
+	}
+	var cfg Config
+	if err := json.Unmarshal(data, &cfg); err != nil {
+		return err
+	}
+	cfg.Name = displayName
+
+	if err := util.WriteJson(context.Background(), target.Path, cfg); err != nil {
+		return fmt.Errorf("failed to write profile name: %w", err)
+	}
 	return nil
 }
 
-func (s *ServiceManager) RemoveProfile(profileName, username string) error {
-	configDir, err := s.getConfigDir(username)
-	if err != nil {
-		return fmt.Errorf("failed to get config directory: %w", err)
+// RemoveProfile deletes the profile identified by id. Callers must have
+// already resolved any user-supplied handle to a concrete ID via
+// ResolveProfile.
+func (s *ServiceManager) RemoveProfile(id ID, username string) error {
+	if id == defaultProfileName {
+		defaultName := readProfileName(DefaultConfigPath)
+		if defaultName == "" {
+			defaultName = defaultProfileName
+		}
+		return fmt.Errorf("cannot remove default profile with name: %s", defaultName)
+	}
+	if !IsValidProfileFilenameStem(id) {
+		return fmt.Errorf("invalid profile ID: %q", id)
 	}
 
-	profileName = sanitizeProfileName(profileName)
-
-	if profileName == defaultProfileName {
-		return fmt.Errorf("cannot remove profile with reserved name: %s", defaultProfileName)
-	}
-	profPath := filepath.Join(configDir, profileName+".json")
-	profileExists, err := fileExists(profPath)
+	profiles, err := s.loadAllProfiles(username)
 	if err != nil {
-		return fmt.Errorf("failed to check if profile exists: %w", err)
+		return fmt.Errorf("load profiles: %w", err)
 	}
-	if !profileExists {
+
+	var target *Profile
+	for i := range profiles {
+		if profiles[i].ID == id {
+			target = &profiles[i]
+			break
+		}
+	}
+	if target == nil {
 		return ErrProfileNotFound
 	}
 
@@ -301,57 +406,26 @@ func (s *ServiceManager) RemoveProfile(profileName, username string) error {
 	if err != nil && !errors.Is(err, ErrNoActiveProfile) {
 		return fmt.Errorf("failed to get active profile: %w", err)
 	}
-
-	if activeProf != nil && activeProf.Name == profileName {
-		return fmt.Errorf("cannot remove active profile: %s", profileName)
+	if activeProf != nil && activeProf.ID == id {
+		return fmt.Errorf("cannot remove active profile: %s", id)
 	}
 
-	err = util.RemoveJson(profPath)
-	if err != nil {
+	if err := util.RemoveJson(target.Path); err != nil {
 		return fmt.Errorf("failed to remove profile config: %w", err)
 	}
+
+	stateFile := filepath.Join(filepath.Dir(target.Path), id.String()+".state.json")
+	if err := os.Remove(stateFile); err != nil && !os.IsNotExist(err) {
+		log.Warnf("failed to remove profile state file %s: %v", stateFile, err)
+	}
+
 	return nil
 }
 
+// ListProfiles returns every profile for the given user, including the
+// default profile, with IsActive flags set.
 func (s *ServiceManager) ListProfiles(username string) ([]Profile, error) {
-	configDir, err := s.getConfigDir(username)
-	if err != nil {
-		return nil, fmt.Errorf("failed to get config directory: %w", err)
-	}
-
-	files, err := util.ListFiles(configDir, "*.json")
-	if err != nil {
-		return nil, fmt.Errorf("failed to list profile files: %w", err)
-	}
-
-	var filtered []string
-	for _, file := range files {
-		if strings.HasSuffix(file, "state.json") {
-			continue // skip state files
-		}
-		filtered = append(filtered, file)
-	}
-	sort.Strings(filtered)
-
-	var activeProfName string
-	activeProf, err := s.GetActiveProfileState()
-	if err == nil {
-		activeProfName = activeProf.Name
-	}
-
-	var profiles []Profile
-	// add default profile always
-	profiles = append(profiles, Profile{Name: defaultProfileName, IsActive: activeProfName == "" || activeProfName == defaultProfileName})
-	for _, file := range filtered {
-		profileName := strings.TrimSuffix(filepath.Base(file), ".json")
-		var isActive bool
-		if activeProfName != "" && activeProfName == profileName {
-			isActive = true
-		}
-		profiles = append(profiles, Profile{Name: profileName, IsActive: isActive})
-	}
-
-	return profiles, nil
+	return s.loadAllProfiles(username)
 }
 
 // GetStatePath returns the path to the state file based on the operating system
@@ -369,7 +443,12 @@ func (s *ServiceManager) GetStatePath() string {
 		return defaultStatePath
 	}
 
-	if activeProf.Name == defaultProfileName {
+	if activeProf.ID == defaultProfileName {
+		return defaultStatePath
+	}
+
+	if !IsValidProfileFilenameStem(activeProf.ID) {
+		log.Warnf("invalid active profile ID %q, using default state path", activeProf.ID)
 		return defaultStatePath
 	}
 
@@ -379,7 +458,7 @@ func (s *ServiceManager) GetStatePath() string {
 		return defaultStatePath
 	}
 
-	return filepath.Join(configDir, activeProf.Name+".state.json")
+	return filepath.Join(configDir, activeProf.ID.String()+".state.json")
 }
 
 // getConfigDir returns the profiles directory, using profilesDir if set, otherwise getConfigDirForUser
@@ -390,3 +469,169 @@ func (s *ServiceManager) getConfigDir(username string) (string, error) {
 
 	return getConfigDirForUser(username)
 }
+
+// loadAllProfiles returns every profile visible to the daemon for the
+// given user, including the default profile. The returned slice is sorted
+// by ID for a stable display order.
+//
+// Each Profile is fully populated: ID is the filename stem, Name comes
+// from the JSON's "name" field (falling back to the filename stem when absent)
+// and Path is built from a basename read off disk.
+func (s *ServiceManager) loadAllProfiles(username string) ([]Profile, error) {
+	activeID, activeIsDefault := s.activeProfileID()
+	defaultName := readProfileName(DefaultConfigPath)
+	if defaultName == "" {
+		defaultName = defaultProfileName
+	}
+
+	profiles := []Profile{{
+		ID:       defaultProfileName,
+		Name:     defaultName,
+		Path:     DefaultConfigPath,
+		IsActive: activeIsDefault,
+	}}
+
+	configDir, err := s.getConfigDir(username)
+	if err != nil {
+		return nil, fmt.Errorf("get config directory: %w", err)
+	}
+
+	entries, err := os.ReadDir(configDir)
+	if err != nil {
+		if errors.Is(err, os.ErrNotExist) {
+			return profiles, nil
+		}
+		return nil, fmt.Errorf("read profile directory: %w", err)
+	}
+
+	var fileProfiles []Profile
+	for _, entry := range entries {
+		if entry.IsDir() {
+			continue
+		}
+		base := entry.Name()
+		if !strings.HasSuffix(base, ".json") {
+			continue
+		}
+		if strings.HasSuffix(base, ".state.json") {
+			continue
+		}
+		stem := ID(strings.TrimSuffix(base, ".json"))
+		if stem == defaultProfileName {
+			// default lives at the top-level config dir, not under /<user>
+			continue
+		}
+		if !IsValidProfileFilenameStem(ID(stem)) {
+			continue
+		}
+		path := filepath.Join(configDir, base)
+		name := readProfileName(path)
+		if name == "" {
+			name = stem.String()
+		}
+		fileProfiles = append(fileProfiles, Profile{
+			ID:       stem,
+			Name:     name,
+			Path:     path,
+			IsActive: stem == ID(activeID),
+		})
+	}
+
+	sort.Slice(fileProfiles, func(i, j int) bool {
+		if fileProfiles[i].Name != fileProfiles[j].Name {
+			return fileProfiles[i].Name < fileProfiles[j].Name
+		}
+		// Sort tie-break on ID so duplicate names always render in the same order.
+		return fileProfiles[i].ID < fileProfiles[j].ID
+	})
+	profiles = append(profiles, fileProfiles...)
+	return profiles, nil
+}
+
+// readProfileName parses just the "name" field from the profile Json.
+func readProfileName(path string) string {
+	data, err := os.ReadFile(path)
+	if err != nil {
+		return ""
+	}
+	var meta profileMeta
+	if err := json.Unmarshal(data, &meta); err != nil {
+		return ""
+	}
+	return meta.Name
+}
+
+// activeProfileID returns the currently-active profile's ID. The second
+// return value is true when the active profile is the default one.
+func (s *ServiceManager) activeProfileID() (ID, bool) {
+	state, err := s.GetActiveProfileState()
+	if err != nil || state == nil {
+		return defaultProfileName, true
+	}
+	if state.ID == "" || state.ID == defaultProfileName {
+		return defaultProfileName, true
+	}
+	return state.ID, false
+}
+
+// ResolveProfile turns a user-supplied handle into a Profile. Resolution
+// precedence is: exact ID match, then unique exact name, then unique ID
+// prefix. Ambiguous matches return *ErrAmbiguousHandle so callers can
+// surface the candidates.
+func (s *ServiceManager) ResolveProfile(handle, username string) (*Profile, error) {
+	if handle == "" {
+		return nil, fmt.Errorf("profile handle is empty")
+	}
+
+	profiles, err := s.loadAllProfiles(username)
+	if err != nil {
+		return nil, err
+	}
+
+	for i := range profiles {
+		if profiles[i].ID == ID(handle) {
+			return &profiles[i], nil
+		}
+	}
+
+	var nameMatches []Profile
+	for i := range profiles {
+		if profiles[i].Name == handle {
+			nameMatches = append(nameMatches, profiles[i])
+		}
+	}
+	if len(nameMatches) == 1 {
+		return &nameMatches[0], nil
+	}
+	if len(nameMatches) > 1 {
+		return nil, &ErrAmbiguousHandle{
+			Handle:     handle,
+			Candidates: nameMatches,
+			Kind:       AmbiguityKindName,
+		}
+	}
+
+	// ID prefix match. Skip the default profile so `select d` does not
+	// accidentally pick it via prefix.
+	var prefixMatches []Profile
+	for i := range profiles {
+		if profiles[i].ID == defaultProfileName {
+			continue
+		}
+		if strings.HasPrefix(profiles[i].ID.String(), handle) {
+			prefixMatches = append(prefixMatches, profiles[i])
+		}
+	}
+	if len(prefixMatches) == 1 {
+		return &prefixMatches[0], nil
+	}
+	if len(prefixMatches) > 1 {
+		return nil, &ErrAmbiguousHandle{
+			Handle:     handle,
+			Candidates: prefixMatches,
+			Kind:       AmbiguityKindIDPrefix,
+		}
+	}
+
+	return nil, ErrProfileNotFound
+}

client/internal/profilemanager/service_test.go

@@ -0,0 +1,230 @@
+package profilemanager
+
+import (
+	"context"
+	"errors"
+	"os"
+	"os/user"
+	"path/filepath"
+	"strings"
+	"testing"
+
+	"github.com/stretchr/testify/assert"
+	"github.com/stretchr/testify/require"
+
+	"github.com/netbirdio/netbird/util"
+)
+
+// withTestSM wires up patched globals + a clean config dir and returns a
+// fully initialized ServiceManager plus the username we are scoped to.
+func withTestSM(t *testing.T, fn func(sm *ServiceManager, username string)) {
+	t.Helper()
+	withTempConfigDir(t, func(configDir string) {
+		withPatchedGlobals(t, configDir, func() {
+			u, err := user.Current()
+			require.NoError(t, err)
+			sm := &ServiceManager{}
+			require.NoError(t, sm.CreateDefaultProfile())
+			fn(sm, u.Username)
+		})
+	})
+}
+
+func TestServiceProfile_ExactID(t *testing.T) {
+	withTestSM(t, func(sm *ServiceManager, username string) {
+		created, err := sm.AddProfile("work", username)
+		require.NoError(t, err)
+
+		got, err := sm.ResolveProfile(created.ID.String(), username)
+		require.NoError(t, err)
+		assert.Equal(t, created.ID, got.ID)
+		assert.Equal(t, "work", got.Name)
+	})
+}
+
+func TestServiceProfile_IDPrefix(t *testing.T) {
+	withTestSM(t, func(sm *ServiceManager, username string) {
+		created, err := sm.AddProfile("work", username)
+		require.NoError(t, err)
+
+		prefix := created.ID[:4]
+		got, err := sm.ResolveProfile(prefix.String(), username)
+		require.NoError(t, err)
+		assert.Equal(t, created.ID, got.ID)
+	})
+}
+
+func TestServiceProfile_AmbiguousPrefix(t *testing.T) {
+	withTestSM(t, func(sm *ServiceManager, username string) {
+		// Plant two profiles whose IDs share a known prefix by writing
+		// the files directly, since generated IDs are random.
+		configDir, err := sm.getConfigDir(username)
+		require.NoError(t, err)
+		for _, id := range []string{"abcd1111aaaa", "abcd2222bbbb"} {
+			path := filepath.Join(configDir, id+".json")
+			require.NoError(t, util.WriteJson(context.Background(), path, &Config{Name: id}))
+		}
+
+		_, err = sm.ResolveProfile("abcd", username)
+		var amb *ErrAmbiguousHandle
+		require.ErrorAs(t, err, &amb)
+		assert.Equal(t, AmbiguityKindIDPrefix, amb.Kind)
+		assert.Len(t, amb.Candidates, 2)
+	})
+}
+
+func TestServiceProfile_ExactNameUnique(t *testing.T) {
+	withTestSM(t, func(sm *ServiceManager, username string) {
+		_, err := sm.AddProfile("work", username)
+		require.NoError(t, err)
+
+		got, err := sm.ResolveProfile("work", username)
+		require.NoError(t, err)
+		assert.Equal(t, "work", got.Name)
+	})
+}
+
+func TestServiceProfile_AmbiguousName(t *testing.T) {
+	withTestSM(t, func(sm *ServiceManager, username string) {
+		_, err := sm.AddProfile("work", username)
+		require.NoError(t, err)
+		_, err = sm.AddProfile("work", username)
+		require.NoError(t, err)
+
+		_, err = sm.ResolveProfile("work", username)
+		var amb *ErrAmbiguousHandle
+		require.ErrorAs(t, err, &amb)
+		assert.Equal(t, AmbiguityKindName, amb.Kind)
+		assert.Len(t, amb.Candidates, 2)
+	})
+}
+
+func TestServiceProfile_NotFound(t *testing.T) {
+	withTestSM(t, func(sm *ServiceManager, username string) {
+		_, err := sm.ResolveProfile("nope", username)
+		assert.ErrorIs(t, err, ErrProfileNotFound)
+	})
+}
+
+func TestServiceProfile_DefaultByExactID(t *testing.T) {
+	withTestSM(t, func(sm *ServiceManager, username string) {
+		got, err := sm.ResolveProfile(defaultProfileName, username)
+		require.NoError(t, err)
+		assert.Equal(t, defaultProfileName, got.ID.String())
+	})
+}
+
+func TestServiceProfile_LegacyFilenameCoexists(t *testing.T) {
+	// Legacy profiles stored as <name>.json with no "name" JSON field
+	// should still be discoverable by name and removable by name.
+	withTestSM(t, func(sm *ServiceManager, username string) {
+		configDir, err := sm.getConfigDir(username)
+		require.NoError(t, err)
+		path := filepath.Join(configDir, "legacy.json")
+		require.NoError(t, util.WriteJson(context.Background(), path, &Config{}))
+
+		got, err := sm.ResolveProfile("legacy", username)
+		require.NoError(t, err)
+		assert.Equal(t, "legacy", got.ID.String())
+		// Name falls back to the filename stem when JSON omits it.
+		assert.Equal(t, "legacy", got.Name)
+	})
+}
+
+func TestAddProfile_AllowsDuplicateWithFlag(t *testing.T) {
+	withTestSM(t, func(sm *ServiceManager, username string) {
+		first, err := sm.AddProfile("work", username)
+		require.NoError(t, err)
+
+		second, err := sm.AddProfile("work", username)
+		require.NoError(t, err)
+		assert.NotEqual(t, first.ID, second.ID)
+		assert.Equal(t, "work", second.Name)
+	})
+}
+
+func TestAddProfile_RejectsInvalidNames(t *testing.T) {
+	withTestSM(t, func(sm *ServiceManager, username string) {
+		cases := []string{
+			"",                                       // empty
+			"\x00\x01",                               // only control chars (becomes empty)
+			strings.Repeat("a", maxProfileNameLen+1), // too long
+		}
+		for _, name := range cases {
+			_, err := sm.AddProfile(name, username)
+			assert.Error(t, err, "expected error for %q", name)
+		}
+	})
+}
+
+func TestRemoveProfile_RejectsInvalidID(t *testing.T) {
+	withTestSM(t, func(sm *ServiceManager, username string) {
+		err := sm.RemoveProfile("../escape", username)
+		assert.Error(t, err)
+	})
+}
+
+func TestSanitizeDisplayName(t *testing.T) {
+	cases := []struct {
+		in      string
+		want    string
+		wantErr bool
+	}{
+		{"work", "work", false},
+		{"My Work Account", "My Work Account", false},
+		{"emoji 🚀 ok", "emoji 🚀 ok", false},
+		{"漢字テスト", "漢字テスト", false},
+		{"with\x00null", "withnull", false},
+		{"\x01\x02\x03", "", true},
+		{"", "", true},
+	}
+	for _, tc := range cases {
+		got, err := sanitizeDisplayName(tc.in)
+		if tc.wantErr {
+			assert.Error(t, err, "case %q", tc.in)
+			continue
+		}
+		assert.NoError(t, err, "case %q", tc.in)
+		assert.Equal(t, tc.want, got, "case %q", tc.in)
+	}
+}
+
+func TestIsValidProfileFilenameStem(t *testing.T) {
+	cases := []struct {
+		in   string
+		want bool
+	}{
+		{"default", true},
+		{"abc123def456", true},
+		{"legacy-name", true},
+		{"legacy_name", true},
+		{"", false},
+		{"..", false},
+		{"../etc", false},
+		{"foo/bar", false},
+		{`foo\bar`, false},
+		{"with space", false},
+		{"with.dot", false},
+		{strings.Repeat("a", maxProfileIDLen+1), false},
+	}
+	for _, tc := range cases {
+		got := IsValidProfileFilenameStem(ID(tc.in))
+		assert.Equal(t, tc.want, got, "case %q", tc.in)
+	}
+}
+
+func TestRemoveProfile_DeletesStateFile(t *testing.T) {
+	withTestSM(t, func(sm *ServiceManager, username string) {
+		created, err := sm.AddProfile("work", username)
+		require.NoError(t, err)
+
+		configDir, err := sm.getConfigDir(username)
+		require.NoError(t, err)
+		statePath := filepath.Join(configDir, created.ID.String()+".state.json")
+		require.NoError(t, os.WriteFile(statePath, []byte(`{"email":"a@b"}`), 0600))
+
+		require.NoError(t, sm.RemoveProfile(created.ID, username))
+		_, err = os.Stat(statePath)
+		assert.True(t, errors.Is(err, os.ErrNotExist), "state file should be removed")
+	})
+}

client/internal/profilemanager/state.go

@@ -13,13 +13,20 @@ type ProfileState struct {
 	Email string `json:"email"`
 }
 
-func (pm *ProfileManager) GetProfileState(profileName string) (*ProfileState, error) {
+// GetProfileState reads the per-profile state file keyed by profile ID.
+// The state file lives in the user's config directory. Legacy state files
+// keyed by the old profile name remain readable.
+func (pm *ProfileManager) GetProfileState(id ID) (*ProfileState, error) {
 	configDir, err := getConfigDir()
 	if err != nil {
 		return nil, fmt.Errorf("get config directory: %w", err)
 	}
 
-	stateFile := filepath.Join(configDir, profileName+".state.json")
+	if id != defaultProfileName && !IsValidProfileFilenameStem(id) {
+		return nil, fmt.Errorf("invalid profile ID: %q", id)
+	}
+
+	stateFile := filepath.Join(configDir, id.String()+".state.json")
 	stateFileExists, err := fileExists(stateFile)
 	if err != nil {
 		return nil, fmt.Errorf("failed to check if profile state file exists: %w", err)
@@ -51,7 +58,12 @@ func (pm *ProfileManager) SetActiveProfileState(state *ProfileState) error {
 		return fmt.Errorf("get active profile: %w", err)
 	}
 
-	stateFile := filepath.Join(configDir, activeProf.Name+".state.json")
+	id := activeProf.ID
+	if id != defaultProfileName && !IsValidProfileFilenameStem(id) {
+		return fmt.Errorf("invalid active profile ID: %q", id)
+	}
+
+	stateFile := filepath.Join(configDir, id.String()+".state.json")
 	err = util.WriteJsonWithRestrictedPermission(context.Background(), stateFile, state)
 	if err != nil {
 		return fmt.Errorf("write profile state: %w", err)

client/internal/relay/relay.go

@@ -32,6 +32,9 @@ type ProbeResult struct {
 	URI  string
 	Err  error
 	Addr string
+	// Transport is the negotiated relay transport, empty
+	// for stun/turn probes or when not connected.
+	Transport string
 }
 
 type StunTurnProbe struct {

client/internal/rosenpass/manager.go

@@ -28,6 +28,15 @@ func hashRosenpassKey(key []byte) string {
 	return hex.EncodeToString(hasher.Sum(nil))
 }
 
+// rpServer is the subset of rp.Server used by Manager. Defined as an interface
+// so tests can substitute a mock without spinning up a real UDP server.
+type rpServer interface {
+	AddPeer(rp.PeerConfig) (rp.PeerID, error)
+	RemovePeer(rp.PeerID) error
+	Run() error
+	Close() error
+}
+
 type Manager struct {
 	ifaceName    string
 	spk          []byte
@@ -36,7 +45,7 @@ type Manager struct {
 	preSharedKey *[32]byte
 	rpPeerIDs    map[string]*rp.PeerID
 	rpWgHandler  *NetbirdHandler
-	server       *rp.Server
+	server       rpServer
 	lock         sync.Mutex
 	port         int
 	wgIface      PresharedKeySetter
@@ -51,7 +60,22 @@ func NewManager(preSharedKey *wgtypes.Key, wgIfaceName string) (*Manager, error)
 
 	rpKeyHash := hashRosenpassKey(public)
 	log.Tracef("generated new rosenpass key pair with public key %s", rpKeyHash)
-	return &Manager{ifaceName: wgIfaceName, rpKeyHash: rpKeyHash, spk: public, ssk: secret, preSharedKey: (*[32]byte)(preSharedKey), rpPeerIDs: make(map[string]*rp.PeerID), lock: sync.Mutex{}}, nil
+	return &Manager{
+		ifaceName:    wgIfaceName,
+		rpKeyHash:    rpKeyHash,
+		spk:          public,
+		ssk:          secret,
+		preSharedKey: (*[32]byte)(preSharedKey),
+		rpPeerIDs:    make(map[string]*rp.PeerID),
+		// rpWgHandler is created here (instead of only in generateConfig) so it
+		// is never nil between NewManager and Run(). Otherwise an early
+		// OnConnected call (race observed on Android, issue #4341) panics on
+		// nil receiver in addPeer -> m.rpWgHandler.AddPeer. generateConfig will
+		// replace it with a fresh handler on each Run() to clear stale peer
+		// state from previous engine sessions.
+		rpWgHandler: NewNetbirdHandler(),
+		lock:        sync.Mutex{},
+	}, nil
 }
 
 func (m *Manager) GetPubKey() []byte {
@@ -65,6 +89,16 @@ func (m *Manager) GetAddress() *net.UDPAddr {
 
 // addPeer adds a new peer to the Rosenpass server
 func (m *Manager) addPeer(rosenpassPubKey []byte, rosenpassAddr string, wireGuardIP string, wireGuardPubKey string) error {
+	// Defense in depth against issue #4341 (Android crash): if Run() has not
+	// completed yet, m.server / m.rpWgHandler may be nil. Return an explicit
+	// error instead of panicking on nil-receiver dereference.
+	if m.server == nil {
+		return fmt.Errorf("rosenpass server not initialized")
+	}
+	if m.rpWgHandler == nil {
+		return fmt.Errorf("rosenpass wg handler not initialized")
+	}
+
 	var err error
 	pcfg := rp.PeerConfig{PublicKey: rosenpassPubKey}
 	if m.preSharedKey != nil {
@@ -79,6 +113,16 @@ func (m *Manager) addPeer(rosenpassPubKey []byte, rosenpassAddr string, wireGuar
 		if pcfg.Endpoint, err = net.ResolveUDPAddr("udp", peerAddr); err != nil {
 			return fmt.Errorf("failed to resolve peer endpoint address: %w", err)
 		}
+		// Our local Rosenpass UDP server binds on the IPv6 wildcard ([::]) — see
+		// GetAddress(). The remote peer's endpoint (pcfg.Endpoint) is the destination
+		// our server will sendto when initiating handshakes. ResolveUDPAddr returns a
+		// 4-byte IPv4 for IPv4 hosts, which the kernel rejects (EDESTADDRREQ) when
+		// sent from an AF_INET6 socket. Normalize the remote endpoint to IPv4-mapped
+		// IPv6 so its address family matches our listening socket.
+		// TODO: maybe bind the Rosenpass UDP server to the peer wg IP addr
+		if v4 := pcfg.Endpoint.IP.To4(); v4 != nil {
+			pcfg.Endpoint.IP = v4.To16()
+		}
 	}
 	peerID, err := m.server.AddPeer(pcfg)
 	if err != nil {
@@ -182,24 +226,31 @@ func (m *Manager) Run() error {
 		return err
 	}
 
-	m.server, err = rp.NewUDPServer(conf)
+	server, err := rp.NewUDPServer(conf)
 	if err != nil {
 		return err
 	}
 
+	m.lock.Lock()
+	m.server = server
+	m.lock.Unlock()
+
 	log.Infof("starting rosenpass server on port %d", m.port)
 
-	return m.server.Run()
+	return server.Run()
 }
 
 // Close closes the Rosenpass server
 func (m *Manager) Close() error {
-	if m.server != nil {
-		err := m.server.Close()
-		if err != nil {
-			log.Errorf("failed closing local rosenpass server")
-		}
-		m.server = nil
+	m.lock.Lock()
+	server := m.server
+	m.server = nil
+	m.lock.Unlock()
+	if server == nil {
+		return nil
+	}
+	if err := server.Close(); err != nil {
+		log.Errorf("failed closing local rosenpass server: %v", err)
 	}
 	return nil
 }

client/internal/rosenpass/manager_test.go

@@ -1,14 +1,412 @@
 package rosenpass
 
 import (
+	"errors"
+	"os"
+	"sync"
 	"testing"
 
+	rp "cunicu.li/go-rosenpass"
 	"github.com/stretchr/testify/require"
+	"golang.zx2c4.com/wireguard/wgctrl/wgtypes"
 )
 
+// --- test doubles -----------------------------------------------------------
+
+type addPeerCall struct {
+	cfg rp.PeerConfig
+}
+
+type removePeerCall struct {
+	id rp.PeerID
+}
+
+type mockServer struct {
+	mu        sync.Mutex
+	addCalls  []addPeerCall
+	removed   []removePeerCall
+	nextID    rp.PeerID
+	addErr    error
+	removeErr error
+	closed    bool
+	ran       bool
+}
+
+func (m *mockServer) AddPeer(cfg rp.PeerConfig) (rp.PeerID, error) {
+	m.mu.Lock()
+	defer m.mu.Unlock()
+	m.addCalls = append(m.addCalls, addPeerCall{cfg: cfg})
+	if m.addErr != nil {
+		return rp.PeerID{}, m.addErr
+	}
+	// Increment a byte in nextID so distinct peers get distinct IDs.
+	m.nextID[0]++
+	return m.nextID, nil
+}
+
+func (m *mockServer) RemovePeer(id rp.PeerID) error {
+	m.mu.Lock()
+	defer m.mu.Unlock()
+	m.removed = append(m.removed, removePeerCall{id: id})
+	return m.removeErr
+}
+
+func (m *mockServer) Run() error   { m.ran = true; return nil }
+func (m *mockServer) Close() error { m.closed = true; return nil }
+
+type setPSKCall struct {
+	peerKey    string
+	psk        wgtypes.Key
+	updateOnly bool
+}
+
+type mockIface struct {
+	mu    sync.Mutex
+	calls []setPSKCall
+	err   error
+}
+
+func (m *mockIface) SetPresharedKey(peerKey string, psk wgtypes.Key, updateOnly bool) error {
+	m.mu.Lock()
+	defer m.mu.Unlock()
+	m.calls = append(m.calls, setPSKCall{peerKey: peerKey, psk: psk, updateOnly: updateOnly})
+	return m.err
+}
+
+// newTestManager builds a Manager with deterministic spk so tie-break
+// against a peer pubkey is controllable from tests. The provided spk byte
+// becomes the first byte; remaining bytes are zero.
+func newTestManager(spkFirstByte byte, mock *mockServer) *Manager {
+	spk := make([]byte, 32)
+	spk[0] = spkFirstByte
+	return &Manager{
+		ifaceName:   "wt0",
+		spk:         spk,
+		ssk:         make([]byte, 32),
+		rpKeyHash:   "test-hash",
+		rpPeerIDs:   make(map[string]*rp.PeerID),
+		rpWgHandler: NewNetbirdHandler(),
+		server:      mock,
+	}
+}
+
+// validWGKey returns a deterministic 32-byte wireguard public key (base64).
+func validWGKey(t *testing.T, lastByte byte) string {
+	t.Helper()
+	var k wgtypes.Key
+	k[31] = lastByte
+	return k.String()
+}
+
+// --- pure helpers ----------------------------------------------------------
+
+func TestHashRosenpassKey_Deterministic(t *testing.T) {
+	key := []byte("hello-rosenpass")
+	require.Equal(t, hashRosenpassKey(key), hashRosenpassKey(key))
+	require.Len(t, hashRosenpassKey(key), 64) // sha256 hex
+}
+
+func TestHashRosenpassKey_DifferentInputsDifferOutputs(t *testing.T) {
+	require.NotEqual(t, hashRosenpassKey([]byte("a")), hashRosenpassKey([]byte("b")))
+}
+
+func TestGetLogLevel_DefaultWhenUnset(t *testing.T) {
+	// Snapshot + unset to exercise the LookupEnv ok=false branch. t.Setenv
+	// can only set, not delete, so do it manually with restore via t.Cleanup.
+	prev, hadPrev := os.LookupEnv(defaultLogLevelVar)
+	require.NoError(t, os.Unsetenv(defaultLogLevelVar))
+	t.Cleanup(func() {
+		if hadPrev {
+			_ = os.Setenv(defaultLogLevelVar, prev)
+		} else {
+			_ = os.Unsetenv(defaultLogLevelVar)
+		}
+	})
+	require.Equal(t, defaultLog.String(), getLogLevel().String())
+}
+
+func TestGetLogLevel_Cases(t *testing.T) {
+	cases := map[string]string{
+		"debug":   "DEBUG",
+		"info":    "INFO",
+		"warn":    "WARN",
+		"error":   "ERROR",
+		"unknown": "INFO", // default fallback
+	}
+	for input, wantStr := range cases {
+		input, wantStr := input, wantStr
+		t.Run(input, func(t *testing.T) {
+			t.Setenv(defaultLogLevelVar, input)
+			require.Equal(t, wantStr, getLogLevel().String())
+		})
+	}
+}
+
 func TestFindRandomAvailableUDPPort(t *testing.T) {
 	port, err := findRandomAvailableUDPPort()
 	require.NoError(t, err)
 	require.Greater(t, port, 0)
 	require.LessOrEqual(t, port, 65535)
 }
+
+// --- addPeer ---------------------------------------------------------------
+
+func TestAddPeer_HigherLocalPubkey_SetsEndpoint(t *testing.T) {
+	srv := &mockServer{}
+	m := newTestManager(0xFF, srv) // local spk lexicographically larger
+
+	remotePubKey := make([]byte, 32) // remote spk = all zeros (smaller)
+	err := m.addPeer(remotePubKey, "rosenpass-host:7000", "100.1.1.1", validWGKey(t, 1))
+	require.NoError(t, err)
+	require.Len(t, srv.addCalls, 1)
+
+	ep := srv.addCalls[0].cfg.Endpoint
+	require.NotNil(t, ep, "initiator side must set Endpoint")
+	require.Equal(t, 7000, ep.Port)
+	require.Equal(t, "100.1.1.1", ep.IP.String())
+}
+
+func TestAddPeer_HigherLocalPubkey_EndpointIPIsIPv4Mapped(t *testing.T) {
+	// Regression guard for the EDESTADDRREQ fix: Endpoint.IP must be 16-byte
+	// (IPv4-mapped IPv6) so it matches the AF_INET6 listening socket family.
+	srv := &mockServer{}
+	m := newTestManager(0xFF, srv)
+
+	err := m.addPeer(make([]byte, 32), "rp:5000", "100.1.1.1", validWGKey(t, 1))
+	require.NoError(t, err)
+
+	ep := srv.addCalls[0].cfg.Endpoint
+	require.NotNil(t, ep)
+	require.Len(t, ep.IP, 16, "IPv4 endpoint must be normalized to 16-byte v4-mapped form")
+	require.True(t, ep.IP.To4() != nil, "Endpoint must still be detected as IPv4")
+}
+
+func TestAddPeer_LowerLocalPubkey_LeavesEndpointNil(t *testing.T) {
+	srv := &mockServer{}
+	m := newTestManager(0x00, srv) // local spk smaller
+
+	remotePubKey := make([]byte, 32)
+	remotePubKey[0] = 0xFF
+	err := m.addPeer(remotePubKey, "rp:5000", "100.1.1.1", validWGKey(t, 2))
+	require.NoError(t, err)
+
+	require.Nil(t, srv.addCalls[0].cfg.Endpoint, "responder side must NOT set Endpoint")
+}
+
+func TestAddPeer_PresharedKeyPropagated(t *testing.T) {
+	srv := &mockServer{}
+	psk := &wgtypes.Key{0x42}
+	m := newTestManager(0xFF, srv)
+	m.preSharedKey = (*[32]byte)(psk)
+
+	err := m.addPeer(make([]byte, 32), "rp:5000", "100.1.1.1", validWGKey(t, 3))
+	require.NoError(t, err)
+	require.Equal(t, [32]byte(*psk), [32]byte(srv.addCalls[0].cfg.PresharedKey))
+}
+
+func TestAddPeer_InvalidRosenpassAddr_ReturnsError(t *testing.T) {
+	srv := &mockServer{}
+	m := newTestManager(0xFF, srv) // initiator path → parses rosenpassAddr
+
+	err := m.addPeer(make([]byte, 32), "not-a-host-port", "100.1.1.1", validWGKey(t, 1))
+	require.Error(t, err)
+	require.Empty(t, srv.addCalls, "server.AddPeer must not run when address parse fails")
+}
+
+func TestAddPeer_InvalidWireGuardPubKey_ReturnsError(t *testing.T) {
+	srv := &mockServer{}
+	m := newTestManager(0xFF, srv)
+
+	err := m.addPeer(make([]byte, 32), "rp:5000", "100.1.1.1", "not-a-valid-key")
+	require.Error(t, err)
+}
+
+func TestAddPeer_ServerError_Propagates(t *testing.T) {
+	srv := &mockServer{addErr: errors.New("boom")}
+	m := newTestManager(0xFF, srv)
+
+	err := m.addPeer(make([]byte, 32), "rp:5000", "100.1.1.1", validWGKey(t, 1))
+	require.Error(t, err)
+}
+
+// Regression guard for issue #4341 (Android crash). If Run() has not completed
+// before OnConnected fires, m.rpWgHandler or m.server may be nil. Without the
+// nil guards, m.rpWgHandler.AddPeer panics on nil receiver.
+func TestAddPeer_NilHandler_ReturnsErrorNoCrash(t *testing.T) {
+	srv := &mockServer{}
+	m := newTestManager(0xFF, srv)
+	m.rpWgHandler = nil // simulate Run() not yet completed
+
+	err := m.addPeer(make([]byte, 32), "rp:5000", "100.1.1.1", validWGKey(t, 1))
+	require.Error(t, err)
+	require.Contains(t, err.Error(), "wg handler not initialized")
+}
+
+func TestAddPeer_NilServer_ReturnsErrorNoCrash(t *testing.T) {
+	m := newTestManager(0xFF, nil)
+	m.server = nil // simulate Run() not yet completed
+
+	err := m.addPeer(make([]byte, 32), "rp:5000", "100.1.1.1", validWGKey(t, 1))
+	require.Error(t, err)
+	require.Contains(t, err.Error(), "server not initialized")
+}
+
+// NewManager must pre-initialize rpWgHandler so the nil-receiver crash from
+// issue #4341 cannot occur in the window between NewManager and Run().
+func TestNewManager_PreInitializesHandler(t *testing.T) {
+	psk := wgtypes.Key{}
+	m, err := NewManager(&psk, "wt0")
+	require.NoError(t, err)
+	require.NotNil(t, m.rpWgHandler, "rpWgHandler must be initialized in NewManager")
+}
+
+func TestAddPeer_RecordsPeerID(t *testing.T) {
+	srv := &mockServer{}
+	m := newTestManager(0xFF, srv)
+
+	wgKey := validWGKey(t, 5)
+	err := m.addPeer(make([]byte, 32), "rp:5000", "100.1.1.1", wgKey)
+	require.NoError(t, err)
+	require.Contains(t, m.rpPeerIDs, wgKey)
+}
+
+// --- OnConnected / OnDisconnected ------------------------------------------
+
+func TestOnConnected_NilRemotePubKey_NoAddPeer(t *testing.T) {
+	srv := &mockServer{}
+	m := newTestManager(0xFF, srv)
+
+	m.OnConnected(validWGKey(t, 1), nil, "100.1.1.1", "rp:5000")
+	require.Empty(t, srv.addCalls, "nil remote rosenpass pubkey must skip AddPeer")
+	require.Empty(t, m.rpPeerIDs)
+}
+
+func TestOnConnected_ValidPubKey_CallsAddPeer(t *testing.T) {
+	srv := &mockServer{}
+	m := newTestManager(0xFF, srv)
+
+	wgKey := validWGKey(t, 1)
+	m.OnConnected(wgKey, make([]byte, 32), "100.1.1.1", "rp:5000")
+	require.Len(t, srv.addCalls, 1)
+	require.Contains(t, m.rpPeerIDs, wgKey)
+}
+
+func TestOnDisconnected_UnknownPeer_NoOp(t *testing.T) {
+	srv := &mockServer{}
+	m := newTestManager(0xFF, srv)
+
+	m.OnDisconnected(validWGKey(t, 99))
+	require.Empty(t, srv.removed, "unknown peer key must not call RemovePeer")
+}
+
+func TestOnDisconnected_KnownPeer_CallsRemoveAndForgets(t *testing.T) {
+	srv := &mockServer{}
+	m := newTestManager(0xFF, srv)
+
+	wgKey := validWGKey(t, 1)
+	require.NoError(t, m.addPeer(make([]byte, 32), "rp:5000", "100.1.1.1", wgKey))
+	require.Contains(t, m.rpPeerIDs, wgKey)
+
+	m.OnDisconnected(wgKey)
+	require.Len(t, srv.removed, 1)
+	require.NotContains(t, m.rpPeerIDs, wgKey, "peer must be forgotten after disconnect")
+}
+
+// --- IsPresharedKeyInitialized ---------------------------------------------
+
+func TestIsPresharedKeyInitialized_UnknownPeer_ReturnsFalse(t *testing.T) {
+	srv := &mockServer{}
+	m := newTestManager(0xFF, srv)
+	require.False(t, m.IsPresharedKeyInitialized(validWGKey(t, 1)))
+}
+
+func TestIsPresharedKeyInitialized_AddedButNotHandshaken_ReturnsFalse(t *testing.T) {
+	srv := &mockServer{}
+	m := newTestManager(0xFF, srv)
+
+	wgKey := validWGKey(t, 2)
+	require.NoError(t, m.addPeer(make([]byte, 32), "rp:5000", "100.1.1.1", wgKey))
+	require.False(t, m.IsPresharedKeyInitialized(wgKey))
+}
+
+// --- NetbirdHandler.outputKey ----------------------------------------------
+
+func TestHandler_OutputKey_FirstCallUsesUpdateOnlyFalse(t *testing.T) {
+	h := NewNetbirdHandler()
+	iface := &mockIface{}
+	h.SetInterface(iface)
+
+	pid := rp.PeerID{0x01}
+	wgKey := wgtypes.Key{0xAA}
+	h.AddPeer(pid, "wt0", rp.Key(wgKey))
+
+	psk := rp.Key{0xBB}
+	h.HandshakeCompleted(pid, psk)
+
+	require.Len(t, iface.calls, 1)
+	require.False(t, iface.calls[0].updateOnly, "first PSK rotation must use updateOnly=false")
+	require.Equal(t, wgKey.String(), iface.calls[0].peerKey)
+}
+
+func TestHandler_OutputKey_SubsequentCallsUseUpdateOnlyTrue(t *testing.T) {
+	h := NewNetbirdHandler()
+	iface := &mockIface{}
+	h.SetInterface(iface)
+
+	pid := rp.PeerID{0x02}
+	h.AddPeer(pid, "wt0", rp.Key(wgtypes.Key{0xCC}))
+
+	h.HandshakeCompleted(pid, rp.Key{0x01}) // first
+	h.HandshakeCompleted(pid, rp.Key{0x02}) // second
+
+	require.Len(t, iface.calls, 2)
+	require.False(t, iface.calls[0].updateOnly)
+	require.True(t, iface.calls[1].updateOnly, "subsequent rotations must use updateOnly=true")
+}
+
+func TestHandler_OutputKey_NilInterface_NoCrashNoCall(t *testing.T) {
+	h := NewNetbirdHandler()
+	// no SetInterface — iface remains nil
+	pid := rp.PeerID{0x03}
+	h.AddPeer(pid, "wt0", rp.Key(wgtypes.Key{}))
+
+	// Must not panic.
+	h.HandshakeCompleted(pid, rp.Key{})
+}
+
+func TestHandler_OutputKey_UnknownPeer_NoCall(t *testing.T) {
+	h := NewNetbirdHandler()
+	iface := &mockIface{}
+	h.SetInterface(iface)
+
+	h.HandshakeCompleted(rp.PeerID{0xFF}, rp.Key{})
+	require.Empty(t, iface.calls, "unknown peer id must not trigger SetPresharedKey")
+}
+
+func TestHandler_RemovePeer_ClearsInitializedState(t *testing.T) {
+	h := NewNetbirdHandler()
+	iface := &mockIface{}
+	h.SetInterface(iface)
+
+	pid := rp.PeerID{0x04}
+	h.AddPeer(pid, "wt0", rp.Key(wgtypes.Key{0xDD}))
+	h.HandshakeCompleted(pid, rp.Key{0x01})
+	require.True(t, h.IsPeerInitialized(pid))
+
+	h.RemovePeer(pid)
+	require.False(t, h.IsPeerInitialized(pid), "RemovePeer must clear initialized flag")
+}
+
+func TestHandler_SetInterfaceAfterAddPeer_StillReceivesKey(t *testing.T) {
+	h := NewNetbirdHandler()
+	pid := rp.PeerID{0x05}
+	wgKey := wgtypes.Key{0xEE}
+	h.AddPeer(pid, "wt0", rp.Key(wgKey))
+
+	iface := &mockIface{}
+	h.SetInterface(iface) // set after AddPeer
+
+	h.HandshakeCompleted(pid, rp.Key{0x42})
+	require.Len(t, iface.calls, 1)
+	require.Equal(t, wgKey.String(), iface.calls[0].peerKey)
+}

client/internal/rosenpass/seed.go

@@ -0,0 +1,42 @@
+package rosenpass
+
+import (
+	"fmt"
+
+	"golang.zx2c4.com/wireguard/wgctrl/wgtypes"
+)
+
+// DeterministicSeedKey derives a 32-byte WireGuard preshared key from a pair
+// of peer public keys. Both peers, given the same key pair, produce the same
+// output regardless of which side runs the function: the inputs are ordered
+// lexicographically before concatenation.
+//
+// NetBird uses this value as the initial Rosenpass-side preshared key when no
+// explicit account-level PSK is configured, so both peers converge on the same
+// PSK before the first post-quantum handshake completes.
+//
+// The resulting key MUST NOT be treated as quantum-safe: it is deterministic
+// from public keys and exists only to seed WireGuard until Rosenpass rotates
+// in a real post-quantum PSK.
+func DeterministicSeedKey(localKey, remoteKey string) (*wgtypes.Key, error) {
+	lk := []byte(localKey)
+	rk := []byte(remoteKey)
+	if len(lk) < 16 || len(rk) < 16 {
+		return nil, fmt.Errorf("rosenpass: peer keys must be at least 16 bytes (got local=%d, remote=%d)", len(lk), len(rk))
+	}
+
+	var keyInput []byte
+	if localKey > remoteKey {
+		keyInput = append(keyInput, lk[:16]...)
+		keyInput = append(keyInput, rk[:16]...)
+	} else {
+		keyInput = append(keyInput, rk[:16]...)
+		keyInput = append(keyInput, lk[:16]...)
+	}
+
+	key, err := wgtypes.NewKey(keyInput)
+	if err != nil {
+		return nil, fmt.Errorf("rosenpass: deterministic seed key: %w", err)
+	}
+	return &key, nil
+}

client/internal/rosenpass/seed_test.go

@@ -0,0 +1,43 @@
+package rosenpass
+
+import (
+	"strings"
+	"testing"
+
+	"github.com/stretchr/testify/require"
+)
+
+func TestDeterministicSeedKey_SameForBothSides(t *testing.T) {
+	// Peer A and peer B must derive the same PSK regardless of which side
+	// computes it: the function orders inputs internally.
+	a := strings.Repeat("a", 32)
+	b := strings.Repeat("b", 32)
+
+	keyAB, err := DeterministicSeedKey(a, b)
+	require.NoError(t, err)
+	keyBA, err := DeterministicSeedKey(b, a)
+	require.NoError(t, err)
+	require.Equal(t, keyAB.String(), keyBA.String(), "swapping arguments must yield identical key")
+}
+
+func TestDeterministicSeedKey_ChangesWithKeys(t *testing.T) {
+	a := strings.Repeat("a", 32)
+	b := strings.Repeat("b", 32)
+	c := strings.Repeat("c", 32)
+
+	keyAB, err := DeterministicSeedKey(a, b)
+	require.NoError(t, err)
+	keyAC, err := DeterministicSeedKey(a, c)
+	require.NoError(t, err)
+	require.NotEqual(t, keyAB.String(), keyAC.String(), "different peer pair must yield different key")
+}
+
+func TestDeterministicSeedKey_TooShortKey_ReturnsError(t *testing.T) {
+	short := "short" // < 16 bytes
+	long := strings.Repeat("x", 32)
+
+	_, err := DeterministicSeedKey(short, long)
+	require.Error(t, err)
+	_, err = DeterministicSeedKey(long, short)
+	require.Error(t, err)
+}

client/internal/routemanager/manager.go

@@ -9,6 +9,7 @@ import (
 	"net/url"
 	"runtime"
 	"slices"
+	"strings"
 	"sync"
 	"sync/atomic"
 	"time"
@@ -332,6 +333,8 @@ func (m *DefaultManager) Stop(stateManager *statemanager.Manager) {
 		}
 	}
 
+	m.notifier.Close()
+
 	m.mux.Lock()
 	defer m.mux.Unlock()
 	m.clientRoutes = nil
@@ -700,6 +703,15 @@ func resolveURLsToIPs(urls []string) []net.IP {
 
 // updateRouteSelectorFromManagement updates the route selector based on the isSelected status from the management server
 func (m *DefaultManager) updateRouteSelectorFromManagement(clientRoutes route.HAMap) {
+	m.mirrorV6ExitPairSelections(clientRoutes)
+
+	// An explicit user "deselect all" must not be overridden by management auto-apply.
+	// Auto-applying an exit node here would call SelectRoutes, which clears the
+	// deselect-all flag and re-enables every route the user turned off.
+	if m.routeSelector.IsDeselectAll() {
+		return
+	}
+
 	exitNodeInfo := m.collectExitNodeInfo(clientRoutes)
 	if len(exitNodeInfo.allIDs) == 0 {
 		return
@@ -709,6 +721,24 @@ func (m *DefaultManager) updateRouteSelectorFromManagement(clientRoutes route.HA
 	m.logExitNodeUpdate(exitNodeInfo)
 }
 
+// mirrorV6ExitPairSelections keeps every synthesized "-v6" exit route's selection
+// consistent with its v4 base. The v4/v6 exit pair is a single toggle, so the v6
+// entry always follows the base: deselecting the v4 exit node also drops its ::/0
+// pair, and any stale (orphaned) explicit selection on the v6 entry is reset. This
+// runs before selection is read so both collectExitNodeInfo and FilterSelectedExitNodes
+// see consistent state, including pairs loaded from persisted selector state.
+func (m *DefaultManager) mirrorV6ExitPairSelections(clientRoutes route.HAMap) {
+	routesByNetID := make(map[route.NetID][]*route.Route, len(clientRoutes))
+	for haID, routes := range clientRoutes {
+		routesByNetID[haID.NetID()] = routes
+	}
+
+	for v6ID := range route.V6ExitMergeSet(routesByNetID) {
+		baseID := route.NetID(strings.TrimSuffix(string(v6ID), route.V6ExitSuffix))
+		m.routeSelector.SyncPairedSelection(baseID, v6ID)
+	}
+}
+
 type exitNodeInfo struct {
 	allIDs               []route.NetID
 	selectedByManagement []route.NetID

client/internal/routemanager/manager_v6exit_test.go

@@ -0,0 +1,47 @@
+package routemanager
+
+import (
+	"net/netip"
+	"testing"
+
+	"github.com/stretchr/testify/assert"
+	"github.com/stretchr/testify/require"
+
+	"github.com/netbirdio/netbird/client/internal/routeselector"
+	"github.com/netbirdio/netbird/route"
+)
+
+// TestUpdateRouteSelectorFromManagement_MirrorsV6ExitPair reproduces the bug seen
+// in netbird-engine.log: persisted selector state has the v4 exit node deselected
+// but its synthesized "-v6" pair explicitly selected (orphaned), so the ::/0 route
+// leaked onto the tunnel. The management update must mirror the v4 deselect onto the
+// v6 pair so FilterSelectedExitNodes drops it.
+func TestUpdateRouteSelectorFromManagement_MirrorsV6ExitPair(t *testing.T) {
+	const (
+		v4ID = route.NetID("Exit Node (raspberrypi)")
+		v6ID = route.NetID("Exit Node (raspberrypi)-v6")
+	)
+	all := []route.NetID{v4ID, v6ID}
+
+	rs := routeselector.NewRouteSelector()
+	// Orphan the v6 selection: select the pair, then deselect only the v4 base.
+	require.NoError(t, rs.SelectRoutes([]route.NetID{v4ID, v6ID}, true, all))
+	require.NoError(t, rs.DeselectRoutes([]route.NetID{v4ID}, all))
+	require.True(t, rs.IsSelected(v6ID), "precondition: orphaned v6 selection survives v4 deselect")
+
+	m := &DefaultManager{routeSelector: rs}
+
+	v4Route := &route.Route{NetID: v4ID, Network: netip.MustParsePrefix("0.0.0.0/0")}
+	v6Route := &route.Route{NetID: v6ID, Network: netip.MustParsePrefix("::/0")}
+	clientRoutes := route.HAMap{
+		"Exit Node (raspberrypi)|0.0.0.0/0": {v4Route},
+		"Exit Node (raspberrypi)-v6|::/0":   {v6Route},
+	}
+
+	m.updateRouteSelectorFromManagement(clientRoutes)
+
+	assert.False(t, rs.IsSelected(v6ID), "v6 pair must follow the v4 base deselect after the management update")
+
+	filtered := rs.FilterSelectedExitNodes(clientRoutes)
+	assert.Empty(t, filtered, "deselected v4 exit node must not leak its ::/0 pair onto the tunnel")
+}

client/internal/routemanager/notifier/notifier_android.go

@@ -16,7 +16,7 @@ import (
 type Notifier struct {
 	initialRoutes []*route.Route
 	currentRoutes []*route.Route
-	fakeIPRoutes []*route.Route
+	fakeIPRoutes  []*route.Route
 
 	listener    listener.NetworkChangeListener
 	listenerMux sync.Mutex
@@ -119,3 +119,7 @@ func (n *Notifier) GetInitialRouteRanges() []string {
 	sort.Strings(initialStrings)
 	return initialStrings
 }
+
+func (n *Notifier) Close() {
+	// unused
+}

client/internal/routemanager/notifier/notifier_ios.go

@@ -3,6 +3,7 @@
 package notifier
 
 import (
+	"container/list"
 	"net/netip"
 	"slices"
 	"sort"
@@ -14,19 +15,26 @@ import (
 )
 
 type Notifier struct {
+	mu              sync.Mutex
+	cond            *sync.Cond
 	currentPrefixes []string
-
-	listener    listener.NetworkChangeListener
-	listenerMux sync.Mutex
+	listener        listener.NetworkChangeListener
+	queue           *list.List
+	closed          bool
 }
 
 func NewNotifier() *Notifier {
-	return &Notifier{}
+	n := &Notifier{
+		queue: list.New(),
+	}
+	n.cond = sync.NewCond(&n.mu)
+	go n.deliverLoop()
+	return n
 }
 
 func (n *Notifier) SetListener(listener listener.NetworkChangeListener) {
-	n.listenerMux.Lock()
-	defer n.listenerMux.Unlock()
+	n.mu.Lock()
+	defer n.mu.Unlock()
 	n.listener = listener
 }
 
@@ -43,32 +51,52 @@ func (n *Notifier) OnNewRoutes(route.HAMap) {
 }
 
 func (n *Notifier) OnNewPrefixes(prefixes []netip.Prefix) {
-	newNets := make([]string, 0)
+	newNets := make([]string, 0, len(prefixes))
 	for _, prefix := range prefixes {
 		newNets = append(newNets, prefix.String())
 	}
 
 	sort.Strings(newNets)
 
+	n.mu.Lock()
 	if slices.Equal(n.currentPrefixes, newNets) {
+		n.mu.Unlock()
 		return
 	}
-
 	n.currentPrefixes = newNets
-	n.notify()
+	routes := strings.Join(n.currentPrefixes, ",")
+	n.queue.PushBack(routes)
+	n.cond.Signal()
+	n.mu.Unlock()
 }
-func (n *Notifier) notify() {
-	n.listenerMux.Lock()
-	defer n.listenerMux.Unlock()
-	if n.listener == nil {
-		return
-	}
 
-	go func(l listener.NetworkChangeListener) {
-		l.OnNetworkChanged(strings.Join(n.currentPrefixes, ","))
-	}(n.listener)
+func (n *Notifier) Close() {
+	n.mu.Lock()
+	n.closed = true
+	n.cond.Signal()
+	n.mu.Unlock()
 }
 
 func (n *Notifier) GetInitialRouteRanges() []string {
 	return nil
 }
+
+func (n *Notifier) deliverLoop() {
+	for {
+		n.mu.Lock()
+		for n.queue.Len() == 0 && !n.closed {
+			n.cond.Wait()
+		}
+		if n.closed && n.queue.Len() == 0 {
+			n.mu.Unlock()
+			return
+		}
+		routes := n.queue.Remove(n.queue.Front()).(string)
+		l := n.listener
+		n.mu.Unlock()
+
+		if l != nil {
+			l.OnNetworkChanged(routes)
+		}
+	}
+}

client/internal/routemanager/notifier/notifier_other.go

@@ -38,3 +38,7 @@ func (n *Notifier) OnNewPrefixes(prefixes []netip.Prefix) {
 func (n *Notifier) GetInitialRouteRanges() []string {
 	return []string{}
 }
+
+func (n *Notifier) Close() {
+	// unused
+}