* [client] Remove peer deletion on lazy activity detection
Updated WireGuard dependency with a patch and removed the RemovePeer
call on lazy activity detection to force a new handshake initiation
to the updated endpoint. This also flushed the staged queue, dropping
the first packet.
Since UpdatePeer (called after ICE/relay negotiation) triggers
SendStagedPackets via IpcSet/handlePostConfig, the peer removal is
no longer necessary. The staged packet survives and the handshake
is initiated on the real endpoint automatically.
This also eliminates the transient state where the peer's endpoint
and routes were absent between the lazy idle and connected states.
* Update WireGuard dependency
* Update WireGuard dependencies
* Update WireGuard dependency
* peer/status: move relay-state reads off the main mux
GetRelayStates held d.mux (RLock) while calling into the relay
Manager (RelayStates/RelayConnectError/ServerURLs). Those calls can be
slow or block on the relay manager's own locks while it is reconnecting,
which kept the central Status mutex held and stalled every peer state
writer (UpdatePeerState, ReplaceOfflinePeers, etc.) contending for it.
Guard relayMgr/relayStates with a dedicated muxRelays mutex and release
it before invoking the relay Manager, so the relay read path no longer
contends with the hot peer-state writers on d.mux.
* peer/status: clone relay states in nil-manager path
Return a cloned snapshot of d.relayStates when relayMgr is nil so callers
cannot mutate the shared cached state, matching the non-nil path.
* [client] Filter link-local and multicast from network addresses
Skip IPv6 link-local and multicast addresses when building the peer
network_addresses list on non-iOS platforms, matching the existing iOS
behavior. A flapping NIC's link-local address otherwise churns the peer
meta on every interface up/down.
* [client] Skip engine restart when default route is unchanged
After the network monitor's debounce window, re-check the default next
hop before triggering a client restart. A flapping NIC that returns to
the same default route no longer forces a restart, avoiding redundant
sync stream reconnects and peer meta churn.
* [client] Exclude own overlay address from reported network addresses
The peer's own WireGuard overlay address (v4 and v6) was reported in
network_addresses. As the interface comes and goes during reconnects it
churned the peer meta on the management server. Drop it in
GetInfoWithChecks, matching the IP regardless of prefix length since the
engine knows the overlay address with the network mask while the
interface reports it as a host address.
* [client] Treat missing default route per protocol in next-hop check
A failed GetNextHop lookup is now treated as an absent route (zero
Nexthop) and compared per protocol, instead of forcing a restart. In a
single-stack network the missing IPv6 default route no longer counts as
a change on every debounce, which previously defeated the unchanged-route
check.
* [client] Make next-hop check injectable for network monitor tests
Move the next-hop comparison behind a NetworkMonitor field set by New(),
so tests can supply a stub instead of hitting the host's real default
route. Fixes the Event/MultiEvent tests hanging after the unchanged-route
check was added.
* Revert "[client] Make next-hop check injectable for network monitor tests"
This reverts commit 88a9d96e8f.
* Revert "[client] Treat missing default route per protocol in next-hop check"
This reverts commit 0fb531e4bc.
* Revert "[client] Skip engine restart when default route is unchanged"
This reverts commit a071b55f35.
* [client] always clean up on Engine.Start failure via defer
The rosenpass init paths (NewManager/Run) returned without calling
e.close(), leaking the WireGuard interface and other partially
initialized state on failure. Per-branch cleanup was easy to miss when
adding new early returns.
Convert Start to a named error return and tear down via a single defer
that calls e.close() whenever err != nil, removing the scattered
per-branch close() calls (including the redundant one in initFirewall).
* [client] make Engine single-use and guard against double Start
Create the run context once in NewEngine instead of in Start. This
keeps e.cancel valid for the engine's whole lifetime, so Stop can
cancel a Start that is blocked waiting on the network while holding
syncMsgMux: Stop now cancels before taking the lock, unblocking that
Start so it can release the mutex.
Reject re-entry into Start: a non-nil wgInterface means a prior Start
already ran (ErrEngineAlreadyStarted), and a cancelled run context
means the engine was stopped (ErrEngineAlreadyStopped). Both checks run
before the cleanup defer so a duplicate call cannot tear down the
running engine's state.
* [client] let engine context unblock WaitStreamConnected
WaitStreamConnected only watched the signal client's own context, which
derives from the parent engineCtx rather than the engine's run context.
A Start blocked here (signal stream not yet up) could therefore not be
released by Engine.Stop, since Stop only cancels the engine's run
context.
Pass a context into WaitStreamConnected and select on it too, and have
the engine pass e.ctx, so Stop cancelling e.ctx unblocks a parked Start.
Update the Client interface, the mock, and callers accordingly.
* [client] fix Start/Stop race by making the run loop own engine shutdown
ConnectClient.Stop stopped the engine directly while the run loop's
backoff cycle could still be starting an engine, so Engine.close raced
Engine.Start (e.g. firewall setup reading wgInterface while close nils
it). embed.Client.Start's rollback only avoided a deadlock by cancelling
before Stop; the race itself remained and was caught by -race.
Make the run loop the sole owner of engine shutdown: derive the run
context in NewConnectClient, and have Stop cancel it and wait for the
loop to exit (skipping the wait when the loop never ran) instead of
calling engine.Stop. The loop now always stops the engine on its way
out, dropping the unsynchronised wgInterface check it used to guard that
call. Self-calls from within the loop use runCancel to avoid waiting on
themselves.
embed keeps a defensive pre-Stop cancel(); the daemon's cleanupConnection
gets a TODO to adopt Stop() rather than stopping the engine in parallel.
* [client] init context state in engine tests
Engine tests built the engine context with context.WithCancel(
context.Background()), omitting CtxInitState. Now that the run context
is created in the constructor, the wgIfaceMonitor goroutine can reach
triggerClientRestart during teardown, which calls CtxGetState and
panics on the missing state. Real entry points (up, embed, service)
always CtxInitState; only the tests skipped it.
* [client] interrupt connect backoff on context cancel
The run loop retried with a raw ExponentialBackOff, so a backoff sleep
ignored context cancellation. Now that ConnectClient.Stop waits for the
run loop to exit, a cancel landing during a sleep would block Stop for
the full interval (up to MaxInterval). Wrap the backoff with the run
context so Retry returns promptly on cancel; the retry budget itself
(MaxElapsedTime) is unchanged.
* [client] bound WaitStreamConnected in signal client tests
The tests waited on WaitStreamConnected with context.Background() and the
client's own context was also Background, so a stream that never connects
would hang until the suite timeout. Pass a 5s timeout context and assert
StreamConnected afterwards so the tests fail fast with a clear reason.
* [client] fix WaitStreamConnected stale-channel race
The StreamConnected check and the wait-channel creation took the mutex
separately, so notifyStreamConnected could set the status and close/clear
connectedCh in between: the waiter then created a fresh channel nobody
would ever close and blocked forever. Also, the status read was unlocked
while notify wrote it under the mutex (a data race). Do the check and the
channel fetch in one locked section; drop the now-unused
getStreamStatusChan helper. Pre-existing bug, not introduced by this branch.
* [client] abort Start if context cancelled while waiting for signal stream
receiveSignalEvents blocks in WaitStreamConnected until the signal stream
connects or the context is cancelled. If Stop cancelled e.ctx while Start
was parked there, Start kept going: it started the remaining subsystems on
a cancelled context and marked a shutting-down engine as started. Return
the context error from receiveSignalEvents and propagate it from Start, so
the deferred cleanup runs and the cancellation reaches the caller.
* [client] clean up all started components on Start failure
Start's failure defer only called close(), which covers the wg interface,
firewall, rosenpass and port forwarding but leaves connMgr, srWatcher,
route/DNS/flow/state managers and the monitor goroutines running. A late
failure (e.g. the context-cancelled check after the signal stream) thus
leaked them.
Extract Stop's locked teardown into stopLocked (caller holds syncMsgMux,
does not wait on shutdownWg) and call it from both Stop and Start's defer.
The defer also cancels the run context first so goroutines started before
the failure unwind. Teardown order is unchanged.
The iOS PKCE login runs in the main-app process, decoupled from the network
extension (the extension's client context is torn down on login-required, which
would otherwise kill the WaitToken goroutine before the OAuth callback arrives).
Because it is decoupled, nothing aborted the flow when the user dismissed the
browser without logging in: WaitToken kept its loopback HTTP server bound to the
redirect port until the flow expired, so the next connect stalled trying to bind
the same port.
Make the Auth context cancellable and add Auth.Stop(), which cancels it. Cancelling
unblocks WaitToken, whose deferred server.Shutdown frees the port immediately. This
mirrors how Android's stopEngine() aborts login via the engine context.
NewAuthWithConfig now also derives a cancellable context; its only iOS caller uses
LoginSync (no interactive server), so behaviour is unchanged there.
* Restores behavior to create profile if not there on Up
* Allows to restore nerbird status showing of the profile name
* [client] Reduce upFunc cognitive complexity
Extract the profile switch/auto-create logic from upFunc into a dedicated
switchOrCreateProfile helper. The inlined NotFound-retry branch pushed
upFunc over SonarCloud's cognitive complexity threshold (S3776).
No behavior change.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
* [client] Make up --profile auto-create idempotent under concurrent runs
Don't fail switchOrCreateProfile on a createProfile error: a concurrent
run may create the profile between the NotFound check and our create
call. Retry the switch regardless and only surface the create error if
the switch also fails. Addresses CodeRabbit race-condition feedback.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
* Share createProfile with addProfileFunc
* But allow conn reusage
* moves switchOrCreateProfile to where it's used
---------
Co-authored-by: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
* [management] Fetch complete user data in ValidateTunnelPeer
Previously the `ValidateTunnelPeer` method used by the ProxyService
would fetch user information from the database if the connected peer
was associated with a user ID, but it would not consult the IdP data
for cached info from JWT claims like email. This caused the value of
the injected `X-Netbird-User` header to always display the peer ID and
never the user email associated with the peer as expected.
This change adds an optional IdP manager to the ProxyService and
fetches the complete user data from it if present.
* [management] Refactor ValidateTunnelPeer principal info gathering
This refactors the gathering of info on proxy tunnel peer principals
into its own method to keep the complexity down and make Sonar happy.
* Migrate to profile ids
* Migrate android profile manager
* Clean up
* Fix review
* Add ID type
* Fix test and runes in ShortID()
* Fix profile switch on up and android comments
* Revert android profile to string id
* Fix feedback
* Fix UI feedback
* Fix id assignment
* Add renaming of profiles
* Fix review
* Remove ui binary
* Fix getProfileConfigPath not validating id
* Change resolve handle order and fix server merge problems
* Fix mdm test
- introduce variables to avoid publishing latest docker tags and installers
- Refactor .goreleaser.yaml to simplify docker configurations and add environment-driven flags
- removed management debug containers (it was doing only log var)
- Stopped building arm v6 32bits in favor of v7 32 bits for services (not client)
- Add target argument to docker files
* [client] fix iOS route-update reordering that black-holed IPv6 on exit-node disable
On iOS the route notifier delivered each prefix update from its own
fire-and-forget goroutine (notify -> `go func`), so Go provided no ordering
guarantee between consecutive updates. It also read currentPrefixes inside
that goroutine without holding the lock, racing the next OnNewPrefixes write.
On exit-node disable the core removes the default routes as two separate
prefix updates (0.0.0.0/0, then the synthesized ::/0). When the two
goroutines were reordered, the stale snapshot still containing ::/0 was
delivered last and clobbered the correct default-free one. iOS then kept the
::/0 default route on the tunnel with no exit node to carry it, black-holing
all IPv6 traffic while IPv4 recovered correctly.
Fix: deliver updates through a single worker goroutine fed by a buffered
channel, preserving production order, and snapshot the joined prefix string
under the mutex so it can't race a concurrent update. Buffered so producers
(which run under the route manager lock) don't block on the listener callback.
* [client] close iOS notifier delivery goroutine on Stop, unbounded queue
The delivery goroutine was never stopped, leaking on every engine
restart. Add Notifier.Close, called from the route manager Stop after
routing cleanup.
Replace the buffered update channel with a cond-driven linked-list
queue so route-update producers (running under the route manager lock)
never block when the listener callback is slow.
Expose a network-free login-required check backed by the in-memory status
recorder. Unlike IsLoginRequired(), which creates a fresh auth client and
performs a blocking network call, IsLoginRequiredCached() reports whether the
LAST observed management error was an auth failure (PermissionDenied/
InvalidArgument).
This lets the iOS connection listener detect a mid-session token expiry from
within onDisconnected during teardown without blocking on a slow or
unavailable network.
* Add iOS debug bundle support in Go
Thread cacheDir through NewClient -> RunOniOS -> MobileDependency.TempDir
so the iOS client can pass its sandbox-writable cache directory for
debug bundle zip file creation instead of os.TempDir().
Move log collection into platform-dispatched addPlatformLog():
- iOS: adds the file-based Go client log (with rotation, stderr/stdout
companions and anonymization handled by addLogfile) plus the Swift app
log (swift-log.log) written by the iOS app into the same log directory
- Other non-Android platforms: existing file-based log + systemd fallback
Narrow the debug_nonandroid.go build tag to !android && !ios so iOS no
longer attempts the systemd journal fallback.
Add a DebugBundle() entry point to the iOS Go client that generates a
bundle, uploads it and returns the upload key. It works with or without
a running engine: when the engine is up it reuses the live config, sync
response and client metrics; otherwise it loads the config from disk (or
the preloaded tvOS config). Guard the live config/ConnectClient behind a
state mutex since DebugBundle may run on a different thread.
* Include the iOS state file in the debug bundle
addStateFile() resolved the state path via ServiceManager.GetStatePath(),
which on iOS points at a hard-coded default that does not exist in the app
sandbox, so the state file was silently skipped.
Add an optional StatePath to GeneratorDependencies and use it when set,
falling back to the ServiceManager default otherwise. The iOS DebugBundle
passes the client's actual state file path (the App Group profile state),
matching the Android bundle which includes the state file.
* ios: enable sync response persistence for debug bundle
Turn on sync response persistence before starting the engine so
DebugBundle can include the network map. On iOS the store is disk-backed
(see syncstore) to keep the map out of the constrained process memory.
* ios: pass log file path through NewClient constructor (#6393)
Add logFilePath field to Client struct and expose it as a parameter
in NewClient so callers provide the Go log path at construction time.
Wire it into DebugBundle via GeneratorDependencies.LogPath so the
debug bundle includes client.log and swift-log.log regardless of
whether the bundle is triggered by the app or the management server.
Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
* ios: pass log file path to engine for remote debug bundles
RunOniOS started the engine with an empty LogPath, so EngineConfig.LogPath
was never set. Management-triggered (jobs) debug bundles read the log path
from the engine config, so they collected no client logs (client.log,
rotated logs, swift-log.log). The GUI path was unaffected because it passes
c.logFilePath directly to the bundle generator.
Thread c.logFilePath through RunOniOS into the engine config so remote
bundles include the client logs too.
---------
Co-authored-by: evgeniyChepelev <68751844+evgeniyChepelev@users.noreply.github.com>
Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
