Bump github.com/aws/aws-sdk-go-v2/service/s3 from 1.87.3 to 1.106.0

Bumps [github.com/aws/aws-sdk-go-v2/service/s3](https://github.com/aws/aws-sdk-go-v2) from 1.87.3 to 1.106.0.
- [Release notes](https://github.com/aws/aws-sdk-go-v2/releases)
- [Commits](https://github.com/aws/aws-sdk-go-v2/compare/service/s3/v1.87.3...service/s3/v1.106.0)

---
updated-dependencies:
- dependency-name: github.com/aws/aws-sdk-go-v2/service/s3
  dependency-version: 1.106.0
  dependency-type: direct:production
...

Signed-off-by: dependabot[bot] <support@github.com>

.github/workflows/frontend-ui.yml

@@ -86,7 +86,7 @@ jobs:
             ${{ runner.os }}-pnpm-
 
       - name: Install dependencies
-        run: pnpm install --frozen-lockfile
+        run: pnpm install --frozen-lockfile --ignore-scripts
 
       - name: Generate Wails bindings
         run: pnpm run bindings

client/internal/auth/sessionwatch/watcher.go

@@ -24,11 +24,7 @@ import (
 )
 
 const (
-	// Skew tolerates a small clock difference between the management
-	// server and this peer before treating a deadline as "in the past".
-	// Slightly above typical NTP drift; tight enough that the UI doesn't
-	// paint a stale expiry as if it were valid.
-	Skew = 30 * time.Second
+	maxPastHorizon = 30 * 24 * time.Hour
 
 	// maxDeadlineHorizon caps how far in the future an accepted deadline
 	// can sit. A timestamp beyond this is almost certainly a protocol
@@ -57,7 +53,7 @@ var (
 	ErrDeadlineTooFarFuture = errors.New("session deadline too far in the future")
 
 	// ErrDeadlineInPast is returned by Update when the supplied deadline
-	// is more than Skew in the past.
+	// is more than maxPastHorizon in the past.
 	ErrDeadlineInPast = errors.New("session deadline in the past")
 )
 
@@ -66,15 +62,14 @@ var (
 // for deadline change/clear, PublishEvent for the two warnings); tests pass
 // a fake recorder so the same surface is observable without an engine.
 //
-// The watcher is the single owner of the deadline propagated to the
-// recorder: every set, clear, sanity-check rejection and Close routes the
-// value through SetSessionExpiresAt, so the SubscribeStatus snapshot the UI
-// reads can never drift from the watcher's timer state. (SetSessionExpiresAt
-// fans out its own state-change notification, so no separate notify is
-// needed.) The recorder is server-scoped and outlives this engine-scoped
-// watcher — without the Close-time clear a teardown (Down, or the Down+Up of
-// a profile switch) would leave the next session showing the previous one's
-// stale "expires in" value.
+// While the watcher runs, it owns the deadline propagated to the recorder:
+// every set, clear and sanity-check rejection routes the value through
+// SetSessionExpiresAt, so the SubscribeStatus snapshot the UI reads can
+// never drift from the watcher's timer state. (SetSessionExpiresAt fans
+// out its own state-change notification, so no separate notify is needed.)
+// The recorder is server-scoped and outlives this engine-scoped watcher;
+// Close deliberately leaves the recorder value in place so transient engine
+// restarts don't blank it — the client run loop clears it on real teardown.
 //
 // PublishEvent's signature mirrors peer.Status.PublishEvent: the watcher
 // composes the metadata internally so the wire format (MetaSession*) is
@@ -135,10 +130,13 @@ func NewWithLeads(lead, final time.Duration, recorder StatusRecorder) *Watcher {
 // was disabled).
 //
 // Same-value updates are no-ops. A different non-zero value cancels any
-// pending timer, resets the "already fired" guard, and arms a new one.
+// pending timer, resets the "already fired" guards, and — when the
+// deadline lies in the future — arms fresh warning timers. A deadline
+// already in the past (within maxPastHorizon) is recorded as-is with no
+// timers: the session has expired and consumers render it that way.
 //
 // Returns one of the sentinel Err* values when the deadline fails the
-// sanity checks (pre-epoch, far future, or in the past beyond Skew).
+// sanity checks (pre-epoch, far future, or past beyond maxPastHorizon).
 // In every error case the watcher first clears its state so it stays
 // consistent with what the caller will push into its other sinks (e.g.
 // applySessionDeadline forces a zero deadline into the status recorder
@@ -163,7 +161,7 @@ func (w *Watcher) Update(deadline time.Time) error {
 	case deadline.After(now.Add(maxDeadlineHorizon)):
 		w.clearLocked()
 		return fmt.Errorf("%w: %v", ErrDeadlineTooFarFuture, deadline)
-	case deadline.Before(now.Add(-Skew)):
+	case deadline.Before(now.Add(-maxPastHorizon)):
 		w.clearLocked()
 		return fmt.Errorf("%w: %v (now=%v)", ErrDeadlineInPast, deadline, now)
 	}
@@ -183,7 +181,9 @@ func (w *Watcher) Update(deadline time.Time) error {
 	w.finalFiredAt = time.Time{}
 	w.dismissedAt = time.Time{}
 
-	w.armTimerLocked(deadline)
+	if deadline.After(now) {
+		w.armTimerLocked(deadline)
+	}
 	recorder := w.recorder
 	w.mu.Unlock()
 	if recorder != nil {
@@ -227,30 +227,25 @@ func (w *Watcher) Dismiss() {
 	log.Infof("auth session final-warning dismissed for deadline %s", w.current.Format(time.RFC3339))
 }
 
-// Close stops any pending timer and drops the deadline on the status
-// recorder. Update calls after Close are ignored. Clearing the recorder
-// here is what keeps a teardown (Down, or the Down+Up of a profile switch)
-// from leaving the next session showing this one's stale "expires in"
-// value — the recorder is server-scoped and outlives this engine-scoped
-// watcher, so nothing else drops the anchor on teardown.
+// Close stops any pending timer. Update calls after Close are ignored.
+// The recorder keeps its deadline: the watcher is engine-scoped and closes
+// on every engine restart (network change, sleep/wake, stream errors)
+// while the SSO deadline stays valid across those, so clearing here would
+// blank the UI's "expires in" row on every transient reconnect. The
+// client run loop clears the server-scoped recorder when it exits for
+// real (Down, profile switch, permanent login failure).
 func (w *Watcher) Close() {
 	w.mu.Lock()
+	defer w.mu.Unlock()
 	if w.closed {
-		w.mu.Unlock()
 		return
 	}
 	w.closed = true
 	w.stopTimerLocked()
-	hadDeadline := !w.current.IsZero()
 	w.current = time.Time{}
 	w.firedAt = time.Time{}
 	w.finalFiredAt = time.Time{}
 	w.dismissedAt = time.Time{}
-	recorder := w.recorder
-	w.mu.Unlock()
-	if recorder != nil && hadDeadline {
-		recorder.SetSessionExpiresAt(time.Time{})
-	}
 }
 
 // clearLocked drops the tracked deadline and notifies the recorder so

client/internal/auth/sessionwatch/watcher_test.go

@@ -224,11 +224,13 @@ func TestNewDeadlineCancelsPriorTimer(t *testing.T) {
 
 func TestRefreshAfterFireArmsNewWarning(t *testing.T) {
 	r := &fakeRecorder{}
-	lead := 30 * time.Millisecond
+	lead := 150 * time.Millisecond
 	w := newWatcher(lead, r)
 	defer w.Close()
 
-	first := time.Now().Add(50 * time.Millisecond)
+	// Warning fires ~20ms in; the deadline itself stays 150ms away so the
+	// replacement below lands well before it.
+	first := time.Now().Add(170 * time.Millisecond)
 	_ = w.Update(first)
 
 	// Wait for stateChange + warning of the first cycle.
@@ -306,7 +308,29 @@ func TestUpdateRejectsTooFarFuture(t *testing.T) {
 	}
 }
 
-func TestUpdateInPastClearsDeadline(t *testing.T) {
+func TestUpdateRecentPastRecordedAsExpired(t *testing.T) {
+	r := &fakeRecorder{}
+	w := newWatcher(50*time.Millisecond, r)
+	defer w.Close()
+
+	d := time.Now().Add(-1 * time.Hour)
+	if err := w.Update(d); err != nil {
+		t.Fatalf("recent-past Update should succeed, got %v", err)
+	}
+	if !w.Deadline().Equal(d) {
+		t.Fatalf("expected deadline to be recorded, got %v want %v", w.Deadline(), d)
+	}
+	if got := r.deadline(); !got.Equal(d) {
+		t.Fatalf("recorder deadline = %v, want %v", got, d)
+	}
+
+	time.Sleep(80 * time.Millisecond)
+	if n := countWhere(r.snapshot(), func(e event) bool { return e.kind == publish }); n != 0 {
+		t.Fatalf("no warning events may fire for an already-past deadline, got %+v", r.snapshot())
+	}
+}
+
+func TestUpdateAncientPastRejected(t *testing.T) {
 	r := &fakeRecorder{}
 	w := newWatcher(50*time.Millisecond, r)
 	defer w.Close()
@@ -318,12 +342,12 @@ func TestUpdateInPastClearsDeadline(t *testing.T) {
 	// Drain the stateChange from the seed.
 	waitForEvents(t, r, 1)
 
-	err := w.Update(time.Now().Add(-1 * time.Hour))
+	err := w.Update(time.Now().Add(-31 * 24 * time.Hour))
 	if !errors.Is(err, ErrDeadlineInPast) {
 		t.Fatalf("want ErrDeadlineInPast, got %v", err)
 	}
 	if !w.Deadline().IsZero() {
-		t.Fatalf("in-past update must clear the deadline, got %v", w.Deadline())
+		t.Fatalf("rejected ancient-past update must clear the deadline, got %v", w.Deadline())
 	}
 	events := waitForEvents(t, r, 2)
 	if events[1].kind != stateChange {
@@ -331,39 +355,25 @@ func TestUpdateInPastClearsDeadline(t *testing.T) {
 	}
 }
 
-func TestUpdateWithinSkewAccepted(t *testing.T) {
-	r := &fakeRecorder{}
-	w := newWatcher(50*time.Millisecond, r)
-	defer w.Close()
-
-	// 5 seconds in the past is within the 30s Skew tolerance — accept it.
-	d := time.Now().Add(-5 * time.Second)
-	if err := w.Update(d); err != nil {
-		t.Fatalf("within-skew Update should succeed, got %v", err)
-	}
-	if !w.Deadline().Equal(d) {
-		t.Fatalf("expected deadline to be applied, got %v want %v", w.Deadline(), d)
-	}
-}
-
 func TestCloseSilencesUpdates(t *testing.T) {
 	r := &fakeRecorder{}
 	w := newWatcher(50*time.Millisecond, r)
 	w.Close()
 
-	_ = w.Update(time.Now().Add(time.Hour))
-
-	time.Sleep(20 * time.Millisecond)
+	if err := w.Update(time.Now().Add(time.Hour)); err != nil {
+		t.Fatalf("Update after Close: want nil, got %v", err)
+	}
 	if got := r.snapshot(); len(got) != 0 {
 		t.Fatalf("expected no events after Close, got %+v", got)
 	}
 }
 
-// TestCloseClearsRecorderDeadline pins the profile-switch fix: a watcher
-// holding a live deadline must zero the recorder on Close so the next
-// engine's watcher (and the UI reading the shared server-scoped recorder)
-// doesn't start out showing the previous session's stale "expires in".
-func TestCloseClearsRecorderDeadline(t *testing.T) {
+// TestCloseKeepsRecorderDeadline pins the reconnect-flap fix: the watcher
+// closes on every engine restart (network change, sleep/wake) while the
+// SSO deadline stays valid across those, so Close must leave the
+// server-scoped recorder's value in place. The client run loop clears the
+// recorder when it exits for real.
+func TestCloseKeepsRecorderDeadline(t *testing.T) {
 	r := &fakeRecorder{}
 	w := newWatcher(time.Hour, r)
 
@@ -377,8 +387,8 @@ func TestCloseClearsRecorderDeadline(t *testing.T) {
 
 	w.Close()
 
-	if got := r.deadline(); !got.IsZero() {
-		t.Fatalf("recorder deadline after Close = %v, want zero", got)
+	if got := r.deadline(); !got.Equal(d) {
+		t.Fatalf("recorder deadline after Close = %v, want %v", got, d)
 	}
 }
 

client/internal/connect.go

@@ -257,7 +257,10 @@ func (c *ConnectClient) run(mobileDependency MobileDependency, runningChan chan
 		log.Errorf("failed to clean up temporary installer file: %v", err)
 	}
 
-	defer c.statusRecorder.ClientStop()
+	defer func() {
+		c.statusRecorder.SetSessionExpiresAt(time.Time{})
+		c.statusRecorder.ClientStop()
+	}()
 	operation := func() error {
 		// if context cancelled we not start new backoff cycle
 		if c.ctx.Err() != nil {

client/internal/engine_session_deadline_test.go

@@ -75,4 +75,14 @@ func TestApplySessionDeadline_ThreeState(t *testing.T) {
 		require.True(t, e.statusRecorder.GetSessionExpiresAt().IsZero(),
 			"invalid timestamp must clear the deadline")
 	})
+
+	t.Run("recently expired timestamp stays visible as expired", func(t *testing.T) {
+		e := newEngine()
+		expired := time.Now().Add(-5 * time.Minute).UTC().Truncate(time.Second)
+
+		e.ApplySessionDeadline(timestamppb.New(expired))
+
+		require.True(t, e.statusRecorder.GetSessionExpiresAt().Equal(expired),
+			"recently-expired deadline must stay on the recorder so consumers render it as expired")
+	})
 }

client/internal/peer/status.go

@@ -813,19 +813,14 @@ func (d *Status) SetSessionExpiresAt(deadline time.Time) {
 }
 
 // GetSessionExpiresAt returns the most recently recorded SSO session deadline,
-// or the zero value when no deadline is tracked. A deadline that has already
-// slipped into the past reports as "none": once the session has expired it is
-// no longer a meaningful countdown, and the sessionwatch.Watcher does not
-// arm a timer at the deadline itself to clear it (only the two pre-expiry
-// warnings). Without this guard the UI would keep painting a stale
-// "expires in …" against a moment that has passed until the next login,
-// extend, or teardown rewrote the value.
+// or the zero value when no deadline is tracked. A deadline in the past is
+// returned as-is: it means the session has expired, and consumers (tray row,
+// CLI status) render it as "expired" rather than hiding it — masking it as
+// "none" would blank the UI at the exact moment it should say the session
+// ended.
 func (d *Status) GetSessionExpiresAt() time.Time {
 	d.mux.Lock()
 	defer d.mux.Unlock()
-	if !d.sessionExpiresAt.IsZero() && d.sessionExpiresAt.Before(time.Now()) {
-		return time.Time{}
-	}
 	return d.sessionExpiresAt
 }
 

client/internal/routemanager/dynamic/route.go

@@ -185,7 +185,7 @@ func (r *Route) startResolver(ctx context.Context) {
 }
 
 func (r *Route) update(ctx context.Context) error {
-	resolved, err := r.resolveDomains()
+	resolved, err := r.resolveDomains(ctx)
 	if err != nil {
 		if len(resolved) == 0 {
 			return fmt.Errorf("resolve domains: %w", err)
@@ -199,9 +199,9 @@ func (r *Route) update(ctx context.Context) error {
 	return nil
 }
 
-func (r *Route) resolveDomains() (domainMap, error) {
+func (r *Route) resolveDomains(ctx context.Context) (domainMap, error) {
 	results := make(chan resolveResult)
-	go r.resolve(results)
+	go r.resolve(ctx, results)
 
 	resolved := domainMap{}
 	var merr *multierror.Error
@@ -217,7 +217,7 @@ func (r *Route) resolveDomains() (domainMap, error) {
 	return resolved, nberrors.FormatErrorOrNil(merr)
 }
 
-func (r *Route) resolve(results chan resolveResult) {
+func (r *Route) resolve(ctx context.Context, results chan resolveResult) {
 	var wg sync.WaitGroup
 
 	for _, d := range r.route.Domains {
@@ -225,10 +225,10 @@ func (r *Route) resolve(results chan resolveResult) {
 		go func(domain domain.Domain) {
 			defer wg.Done()
 
-			ips, err := r.getIPsFromResolver(domain)
+			ips, err := r.getIPsFromResolver(ctx, domain)
 			if err != nil {
 				log.Tracef("Failed to resolve domain %s with private resolver: %v", domain.SafeString(), err)
-				ips, err = net.LookupIP(domain.PunycodeString())
+				ips, err = lookupHostIPs(ctx, domain)
 				if err != nil {
 					results <- resolveResult{domain: domain, err: fmt.Errorf("resolve d %s: %w", domain.SafeString(), err)}
 					return
@@ -364,6 +364,20 @@ func determinePrefixChanges(oldPrefixes, newPrefixes []netip.Prefix) (toAdd, toR
 	return
 }
 
+// lookupHostIPs resolves d via the system resolver, honoring ctx cancellation.
+func lookupHostIPs(ctx context.Context, d domain.Domain) ([]net.IP, error) {
+	addrs, err := net.DefaultResolver.LookupIPAddr(ctx, d.PunycodeString())
+	if err != nil {
+		return nil, err
+	}
+
+	ips := make([]net.IP, 0, len(addrs))
+	for _, addr := range addrs {
+		ips = append(ips, addr.IP)
+	}
+	return ips, nil
+}
+
 func combinePrefixes(oldPrefixes, removedPrefixes, addedPrefixes []netip.Prefix) []netip.Prefix {
 	prefixSet := make(map[netip.Prefix]struct{})
 	for _, prefix := range oldPrefixes {

client/internal/routemanager/dynamic/route_generic.go

@@ -3,11 +3,12 @@
 package dynamic
 
 import (
+	"context"
 	"net"
 
 	"github.com/netbirdio/netbird/shared/management/domain"
 )
 
-func (r *Route) getIPsFromResolver(domain domain.Domain) ([]net.IP, error) {
-	return net.LookupIP(domain.PunycodeString())
+func (r *Route) getIPsFromResolver(ctx context.Context, domain domain.Domain) ([]net.IP, error) {
+	return lookupHostIPs(ctx, domain)
 }

client/internal/routemanager/dynamic/route_ios.go

@@ -3,6 +3,7 @@
 package dynamic
 
 import (
+	"context"
 	"fmt"
 	"net"
 	"time"
@@ -16,7 +17,7 @@ import (
 
 const dialTimeout = 10 * time.Second
 
-func (r *Route) getIPsFromResolver(domain domain.Domain) ([]net.IP, error) {
+func (r *Route) getIPsFromResolver(ctx context.Context, domain domain.Domain) ([]net.IP, error) {
 	privateClient, err := nbdns.GetClientPrivate(r.wgInterface, r.resolverAddr.Addr(), dialTimeout)
 	if err != nil {
 		return nil, fmt.Errorf("error while creating private client: %s", err)
@@ -32,7 +33,7 @@ func (r *Route) getIPsFromResolver(domain domain.Domain) ([]net.IP, error) {
 		msg := new(dns.Msg)
 		msg.SetQuestion(fqdn, qtype)
 
-		response, _, err := nbdns.ExchangeWithFallback(nil, privateClient, msg, r.resolverAddr.String())
+		response, _, err := nbdns.ExchangeWithFallback(ctx, privateClient, msg, r.resolverAddr.String())
 		if err != nil {
 			if queryErr == nil {
 				queryErr = fmt.Errorf("DNS query for %s (type %d) after %s: %w", domain.SafeString(), qtype, time.Since(startTime), err)

client/server/server.go

@@ -1081,7 +1081,10 @@ func (s *Server) Down(ctx context.Context, _ *proto.DownRequest) (*proto.DownRes
 
 	if err := s.cleanupConnection(); err != nil {
 		s.mutex.Unlock()
-		// todo review to update the status in case any type of error
+		if errors.Is(err, ErrServiceNotUp) {
+			log.Debugf("Down called while service not up: %v", err)
+			return nil, err
+		}
 		log.Errorf("failed to shut down properly: %v", err)
 		return nil, err
 	}
@@ -1154,7 +1157,7 @@ func (s *Server) cleanupConnection() error {
 	// making the run loop the sole owner of engine shutdown.
 	if engine != nil {
 		if err := engine.Stop(); err != nil {
-			return err
+			log.Errorf("failed to stop engine during cleanup: %v", err)
 		}
 	}
 

client/ui/autostart_default.go

@@ -51,7 +51,7 @@ func autostartDisabledByMDM(policy *mdm.Policy) bool {
 // netbirdFootprintExists reports whether the machine already carries NetBird
 // daemon config or state, meaning this is not a genuinely fresh install. It is
 // the update-safety gate for the autostart default: upgrading users always
-// have a footprint, so an update can never trigger a login-item write.
+// have a footprint, so an update can never trigger a autostart entry write.
 func netbirdFootprintExists() bool {
 	candidates := []string{
 		profilemanager.DefaultConfigPath,
@@ -69,9 +69,23 @@ func netbirdFootprintExists() bool {
 // applyAutostartDefault runs the one-time launch-on-login default for genuinely
 // fresh installs. The autostartInitialized marker is persisted before any
 // enable attempt so a crash mid-flow degrades to "never enabled" instead of
-// retrying login-item writes on every launch. A user's later disable in
+// retrying autostart entry writes on every launch. A user's later disable in
 // Settings is never overridden: the marker guarantees at-most-once, ever.
 func applyAutostartDefault(ctx context.Context, autostart *services.Autostart, prefs *preferences.Store, prefsFileExisted bool) {
+	mdmDisabled := autostartDisabledByMDM(mdm.LoadPolicy())
+
+	if mdmDisabled {
+		if enabled, err := autostart.IsEnabled(ctx); err != nil {
+			log.Warnf("MDM disableAutostart: read autostart state: %v", err)
+		} else if enabled {
+			if err := autostart.SetEnabled(ctx, false); err != nil {
+				log.Warnf("MDM disableAutostart: force off failed: %v", err)
+			} else {
+				log.Info("MDM disableAutostart enforced: autostart turned off")
+			}
+		}
+	}
+
 	priorFootprint := netbirdFootprintExists() || prefsFileExisted
 
 	if prefs.Get().AutostartInitialized {
@@ -84,7 +98,7 @@ func applyAutostartDefault(ctx context.Context, autostart *services.Autostart, p
 
 	state := autostartDefaultState{
 		supported:    autostart.Supported(ctx),
-		mdmDisabled:  autostartDisabledByMDM(mdm.LoadPolicy()),
+		mdmDisabled:  mdmDisabled,
 		priorInstall: priorFootprint,
 	}
 	enable, reason := shouldEnableAutostartDefault(state)

client/ui/frontend/src/components/empty-state/DaemonOutdatedOverlay.tsx

@@ -1,10 +1,13 @@
+import { useEffect, useState } from "react";
 import { useTranslation } from "react-i18next";
 import { AlertTriangleIcon, DownloadIcon } from "lucide-react";
 import { Browser } from "@wailsio/runtime";
+import { Version } from "@bindings/services";
 import { Button } from "@/components/buttons/Button";
 import { useStatus } from "@/contexts/StatusContext.tsx";
 
 const RELEASES_URL = "https://github.com/netbirdio/netbird/releases/latest";
+const RC_RELEASES_URL = "https://pkgs.netbird.io/releases/rc";
 
 function openUrl(url: string) {
     Browser.OpenURL(url).catch(() => globalThis.open(url, "_blank"));
@@ -12,7 +15,26 @@ function openUrl(url: string) {
 
 export const DaemonOutdatedOverlay = () => {
     const { t } = useTranslation();
-    const { isDaemonOutdated } = useStatus();
+    const { status, isDaemonOutdated } = useStatus();
+
+    const [guiVersion, setGuiVersion] = useState<string>("-");
+    const clientVersion = status?.daemonVersion ?? "—";
+
+    const isRc = /-rc/i.test(guiVersion) || /-rc/i.test(clientVersion);
+    const downloadUrl = isRc ? RC_RELEASES_URL : RELEASES_URL;
+
+    useEffect(() => {
+        if (!isDaemonOutdated) return;
+        let cancelled = false;
+        Version.GUI()
+            .then((v) => {
+                if (!cancelled) setGuiVersion(v);
+            })
+            .catch((err) => console.error("[DaemonOutdatedOverlay] GUI version error", err));
+        return () => {
+            cancelled = true;
+        };
+    }, [isDaemonOutdated]);
 
     if (!isDaemonOutdated) return null;
 
@@ -38,10 +60,37 @@ export const DaemonOutdatedOverlay = () => {
                     <p className={"text-sm text-nb-gray-300"}>{t("daemon.outdated.description")}</p>
                 </div>
 
+                <div className={"flex flex-col items-center gap-0.5 text-center"}>
+                    <p className={"text-sm font-semibold text-nb-gray-100"}>
+                        {clientVersion === "development" ? (
+                            <span>
+                                {t("settings.about.clientName")}{" "}
+                                <span className={"font-mono text-yellow-400"}>
+                                    {t("settings.about.development")}
+                                </span>
+                            </span>
+                        ) : (
+                            t("settings.about.client", { version: clientVersion })
+                        )}
+                    </p>
+                    <p className={"text-sm font-medium text-nb-gray-250"}>
+                        {guiVersion === "development" ? (
+                            <span>
+                                {t("settings.about.guiName")}{" "}
+                                <span className={"font-mono text-yellow-400"}>
+                                    {t("settings.about.development")}
+                                </span>
+                            </span>
+                        ) : (
+                            t("settings.about.gui", { version: guiVersion })
+                        )}
+                    </p>
+                </div>
+
                 <div className={"wails-no-draggable"}>
-                    <Button variant={"primary"} size={"xs"} onClick={() => openUrl(RELEASES_URL)}>
+                    <Button variant={"primary"} size={"xs"} onClick={() => openUrl(downloadUrl)}>
                         <DownloadIcon size={14} />
-                        {t("update.card.getInstaller")}
+                        {t("daemon.outdated.download")}
                     </Button>
                 </div>
             </div>

client/ui/frontend/src/contexts/ProfileContext.tsx

@@ -28,6 +28,7 @@ type ProfileContextValue = {
     loaded: boolean;
     refresh: () => Promise<void>;
     switchProfile: (id: string) => Promise<void>;
+    switchProfileNoConnect: (id: string) => Promise<void>;
     addProfile: (name: string) => Promise<string>;
     removeProfile: (id: string) => Promise<void>;
     renameProfile: (id: string, newName: string) => Promise<void>;
@@ -112,6 +113,16 @@ export const ProfileProvider = ({ children }: { children: ReactNode }) => {
         [username, refresh],
     );
 
+    // Manage-profiles variant: switches without connecting, so the user can
+    // still adjust the management URL before bringing the connection up.
+    const switchProfileNoConnect = useCallback(
+        async (id: string) => {
+            await ProfileSwitcher.SwitchActiveNoConnect({ profileName: id, username });
+            await refresh();
+        },
+        [username, refresh],
+    );
+
     // addProfile creates a profile by display name and returns the
     // daemon-generated ID, so the caller can immediately address it by ID.
     const addProfile = useCallback(
@@ -158,6 +169,7 @@ export const ProfileProvider = ({ children }: { children: ReactNode }) => {
             loaded,
             refresh,
             switchProfile,
+            switchProfileNoConnect,
             addProfile,
             removeProfile,
             renameProfile,
@@ -171,6 +183,7 @@ export const ProfileProvider = ({ children }: { children: ReactNode }) => {
             loaded,
             refresh,
             switchProfile,
+            switchProfileNoConnect,
             addProfile,
             removeProfile,
             renameProfile,

client/ui/frontend/src/modules/profiles/ProfilesTab.tsx

@@ -45,7 +45,7 @@ export function ProfilesTab() {
         activeProfileId,
         loaded,
         username,
-        switchProfile,
+        switchProfileNoConnect,
         addProfile,
         removeProfile,
         renameProfile,
@@ -100,7 +100,7 @@ export function ProfilesTab() {
             confirmLabel: t("profile.switch.confirm"),
         });
         if (!ok) return;
-        await guarded(i18next.t("profile.error.switchTitle"), () => switchProfile(id));
+        await guarded(i18next.t("profile.error.switchTitle"), () => switchProfileNoConnect(id));
     };
 
     const handleDeregister = async (id: string, name: string) => {
@@ -129,14 +129,13 @@ export function ProfilesTab() {
         await guarded(i18next.t("profile.error.createTitle"), async () => {
             const id = await addProfile(name);
             // SetConfig is keyed by the new profile's ID, so it writes the
-            // not-yet-active profile. Write before switching so any reconnect
-            // targets the right deployment.
+            // not-yet-active profile before the switch makes it current.
             if (!isNetbirdCloud(managementUrl)) {
                 await SettingsSvc.SetConfig(
                     new SetConfigParams({ profileName: id, username, managementUrl }),
                 );
             }
-            await switchProfile(id);
+            await switchProfileNoConnect(id);
         });
     };
 

client/ui/frontend/src/modules/session/SessionExpirationDialog.tsx

@@ -73,6 +73,13 @@ export default function SessionExpirationDialog() {
 
         let offCancel: (() => void) | undefined;
 
+        // Return the dialog to its interactive state and dismiss the browser popup
+        const resetDialog = () => {
+            offCancel?.();
+            WindowManager.CloseBrowserLogin().catch(console.error);
+            setBusy(false);
+        };
+
         try {
             const start = await Session.RequestExtend({ hint: "" });
             const uri = start.verificationUriComplete || start.verificationUri;
@@ -105,25 +112,22 @@ export default function SessionExpirationDialog() {
             if (outcome.kind === "cancel") {
                 waitPromise.cancel?.();
                 waitPromise.catch(() => {});
+                resetDialog();
                 return;
             }
 
             // Another surface owns this flow; keep the dialog open to retry.
             if (outcome.result.preempted) {
+                resetDialog();
                 return;
             }
-
-            // Close before the popup so the restore can't flash this window back.
-            WindowManager.CloseSessionExpiration().catch(console.error);
+            WindowManager.CloseRenewFlow().catch(console.error);
         } catch (e) {
+            resetDialog();
             await errorDialog({
                 Title: t("sessionExpiration.extendFailedTitle"),
                 Message: formatErrorMessage(e),
             });
-        } finally {
-            offCancel?.();
-            WindowManager.CloseBrowserLogin().catch(console.error);
-            setBusy(false);
         }
     }, [busy, t]);
 
@@ -139,12 +143,11 @@ export default function SessionExpirationDialog() {
             });
             WindowManager.CloseSessionExpiration().catch(console.error);
         } catch (e) {
+            setBusy(false);
             await errorDialog({
                 Title: t("sessionExpiration.logoutFailedTitle"),
                 Message: formatErrorMessage(e),
             });
-        } finally {
-            setBusy(false);
         }
     }, [busy, t]);
 

client/ui/frontend/src/modules/welcome/WelcomeStepTray.tsx

@@ -22,6 +22,9 @@ type WelcomeStepTrayProps = {
 export function WelcomeStepTray({ onContinue }: Readonly<WelcomeStepTrayProps>) {
     const { t } = useTranslation();
     const trayScreenshot = trayScreenshotForOS();
+    // macOS has no tray — the icon sits in the menu bar, so the copy says so.
+    const titleKey = isMacOS() ? "welcome.titleMac" : "welcome.title";
+    const descriptionKey = isMacOS() ? "welcome.descriptionMac" : "welcome.description";
 
     return (
         <>
@@ -36,9 +39,9 @@ export function WelcomeStepTray({ onContinue }: Readonly<WelcomeStepTrayProps>)
 
             <div className={"flex w-full flex-col gap-1"}>
                 <DialogHeading id={"nb-welcome-title"} align={"left"}>
-                    {t("welcome.title")}
+                    {t(titleKey)}
                 </DialogHeading>
-                <DialogDescription align={"left"}>{t("welcome.description")}</DialogDescription>
+                <DialogDescription align={"left"}>{t(descriptionKey)}</DialogDescription>
             </div>
 
             <DialogActions>

client/ui/i18n/locales/de/common.json

@@ -1034,9 +1034,15 @@
     "welcome.title": {
         "message": "Suchen Sie NetBird in der Taskleiste"
     },
+    "welcome.titleMac": {
+        "message": "Suchen Sie NetBird in der Menüleiste"
+    },
     "welcome.description": {
         "message": "NetBird läuft in Ihrer Taskleiste. Klicken Sie auf das Symbol, um sich zu verbinden, Profile zu wechseln oder die Einstellungen zu öffnen."
     },
+    "welcome.descriptionMac": {
+        "message": "NetBird läuft in Ihrer Menüleiste. Klicken Sie auf das Symbol, um sich zu verbinden, Profile zu wechseln oder die Einstellungen zu öffnen."
+    },
     "welcome.continue": {
         "message": "Weiter"
     },
@@ -1293,10 +1299,13 @@
         "message": "Dokumentation"
     },
     "daemon.outdated.title": {
-        "message": "NetBird-Dienst ist veraltet"
+        "message": "NetBird Client ist veraltet"
     },
     "daemon.outdated.description": {
-        "message": "Aktualisieren Sie den NetBird-Dienst, um diese App zu verwenden."
+        "message": "Die neue GUI ist nicht mit Ihrem älteren Client kompatibel. Aktualisieren Sie Ihren Client, um die neue Anwendung zu verwenden."
+    },
+    "daemon.outdated.download": {
+        "message": "Neueste Version herunterladen"
     },
     "error.jwt_clock_skew": {
         "message": "Anmeldung fehlgeschlagen: Die Uhr dieses Geräts ist nicht mit dem Server synchron. Bitte synchronisieren Sie die Systemuhr und versuchen Sie es erneut."

client/ui/i18n/locales/en/common.json

@@ -1377,11 +1377,19 @@
     },
     "welcome.title": {
         "message": "Look for NetBird in your tray",
-        "description": "Heading on the first onboarding step, pointing the user to the tray icon. 'tray' = system tray / menu bar."
+        "description": "Heading on the first onboarding step, pointing the user to the tray icon. Shown on Windows and Linux; macOS uses welcome.titleMac."
+    },
+    "welcome.titleMac": {
+        "message": "Look for NetBird in your menu bar",
+        "description": "Heading on the first onboarding step on macOS, pointing the user to the menu bar icon. Use your language's Apple term for the macOS menu bar."
     },
     "welcome.description": {
         "message": "NetBird lives in your tray. Click the icon to connect, switch profiles, or open settings.",
-        "description": "Body of the first onboarding step explaining the tray icon."
+        "description": "Body of the first onboarding step explaining the tray icon. Shown on Windows and Linux; macOS uses welcome.descriptionMac."
+    },
+    "welcome.descriptionMac": {
+        "message": "NetBird lives in your menu bar. Click the icon to connect, switch profiles, or open settings.",
+        "description": "Body of the first onboarding step on macOS explaining the menu bar icon. Use your language's Apple term for the macOS menu bar."
     },
     "welcome.continue": {
         "message": "Continue",
@@ -1724,12 +1732,16 @@
         "description": "Documentation link on the daemon-unavailable overlay."
     },
     "daemon.outdated.title": {
-        "message": "NetBird Service Is Outdated",
-        "description": "Title of the overlay shown when the NetBird background service is too old to drive this UI."
+        "message": "NetBird Client Is Outdated",
+        "description": "Title of the overlay shown when the NetBird client (daemon) is too old to drive this UI."
     },
     "daemon.outdated.description": {
-        "message": "Update the NetBird service to use this app.",
-        "description": "Body of the daemon-outdated overlay telling the user to upgrade the service."
+        "message": "The new GUI isn't compatible with the older NetBird client. Update your client to use the new application.",
+        "description": "Body of the daemon-outdated overlay explaining that the GUI is newer than the client and the client must be updated."
+    },
+    "daemon.outdated.download": {
+        "message": "Download Latest",
+        "description": "Button on the daemon-outdated overlay that opens the download page for the latest release."
     },
     "error.jwt_clock_skew": {
         "message": "Sign-in failed: this device's clock is out of sync with the server. Please sync your system clock and try again.",

client/ui/i18n/locales/es/common.json

@@ -1034,9 +1034,15 @@
     "welcome.title": {
         "message": "Busque NetBird en su bandeja del sistema"
     },
+    "welcome.titleMac": {
+        "message": "Busque NetBird en su barra de menús"
+    },
     "welcome.description": {
         "message": "NetBird reside en su bandeja del sistema. Haga clic en el icono para conectarse, cambiar de perfil o abrir la configuración."
     },
+    "welcome.descriptionMac": {
+        "message": "NetBird reside en su barra de menús. Haga clic en el icono para conectarse, cambiar de perfil o abrir la configuración."
+    },
     "welcome.continue": {
         "message": "Continuar"
     },
@@ -1293,10 +1299,13 @@
         "message": "Documentación"
     },
     "daemon.outdated.title": {
-        "message": "El servicio de NetBird está desactualizado"
+        "message": "NetBird Client está desactualizado"
     },
     "daemon.outdated.description": {
-        "message": "Actualice el servicio de NetBird para usar esta aplicación."
+        "message": "La nueva GUI no es compatible con su cliente anterior. Actualice su cliente para usar la nueva aplicación."
+    },
+    "daemon.outdated.download": {
+        "message": "Descargar la última versión"
     },
     "error.jwt_clock_skew": {
         "message": "Error al iniciar sesión: el reloj de este dispositivo no está sincronizado con el servidor. Sincronice el reloj del sistema e inténtelo de nuevo."

client/ui/i18n/locales/fr/common.json

@@ -1034,9 +1034,15 @@
     "welcome.title": {
         "message": "Cherchez NetBird dans votre barre d’état système"
     },
+    "welcome.titleMac": {
+        "message": "Cherchez NetBird dans votre barre des menus"
+    },
     "welcome.description": {
         "message": "NetBird se trouve dans votre barre d’état système. Cliquez sur l’icône pour vous connecter, changer de profil ou ouvrir les paramètres."
     },
+    "welcome.descriptionMac": {
+        "message": "NetBird se trouve dans votre barre des menus. Cliquez sur l’icône pour vous connecter, changer de profil ou ouvrir les paramètres."
+    },
     "welcome.continue": {
         "message": "Continuer"
     },
@@ -1293,10 +1299,13 @@
         "message": "Documentation"
     },
     "daemon.outdated.title": {
-        "message": "Le service NetBird est obsolète"
+        "message": "Le Client NetBird est obsolète"
     },
     "daemon.outdated.description": {
-        "message": "Mettez à jour le service NetBird pour utiliser cette application."
+        "message": "La nouvelle GUI n'est pas compatible avec votre ancien client. Mettez à jour votre client pour utiliser la nouvelle application."
+    },
+    "daemon.outdated.download": {
+        "message": "Télécharger la dernière version"
     },
     "error.jwt_clock_skew": {
         "message": "Échec de la connexion : l’horloge de cet appareil n’est pas synchronisée avec le serveur. Veuillez synchroniser l’horloge de votre système et réessayer."

client/ui/i18n/locales/hu/common.json

@@ -1034,9 +1034,15 @@
     "welcome.title": {
         "message": "Keresse a NetBirdöt a tálcán"
     },
+    "welcome.titleMac": {
+        "message": "Keresse a NetBirdöt a menüsorban"
+    },
     "welcome.description": {
         "message": "A NetBird a tálcán fut. Kattintson az ikonra a csatlakozáshoz, profilváltáshoz vagy a beállítások megnyitásához."
     },
+    "welcome.descriptionMac": {
+        "message": "A NetBird a menüsorban fut. Kattintson az ikonra a csatlakozáshoz, profilváltáshoz vagy a beállítások megnyitásához."
+    },
     "welcome.continue": {
         "message": "Folytatás"
     },
@@ -1293,10 +1299,13 @@
         "message": "Dokumentáció"
     },
     "daemon.outdated.title": {
-        "message": "A NetBird szolgáltatás elavult"
+        "message": "A NetBird Kliens elavult"
     },
     "daemon.outdated.description": {
-        "message": "Frissítsd a NetBird szolgáltatást az alkalmazás használatához."
+        "message": "Az új GUI nem kompatibilis a régebbi klienseddel. Frissítsd a klienst az új alkalmazás használatához."
+    },
+    "daemon.outdated.download": {
+        "message": "Legújabb letöltése"
     },
     "error.jwt_clock_skew": {
         "message": "A bejelentkezés sikertelen: az eszköz órája eltér a szerverétől. Kérjük, szinkronizálja a rendszer óráját, majd próbálja újra."

client/ui/i18n/locales/it/common.json

@@ -1034,9 +1034,15 @@
     "welcome.title": {
         "message": "Cerchi NetBird nella tray"
     },
+    "welcome.titleMac": {
+        "message": "Cerchi NetBird nella barra dei menu"
+    },
     "welcome.description": {
         "message": "NetBird risiede nella tray. Clicchi sull'icona per connettersi, cambiare profilo o aprire le impostazioni."
     },
+    "welcome.descriptionMac": {
+        "message": "NetBird risiede nella barra dei menu. Clicchi sull'icona per connettersi, cambiare profilo o aprire le impostazioni."
+    },
     "welcome.continue": {
         "message": "Continua"
     },
@@ -1293,10 +1299,13 @@
         "message": "Documentazione"
     },
     "daemon.outdated.title": {
-        "message": "Il servizio NetBird è obsoleto"
+        "message": "NetBird Client è obsoleto"
     },
     "daemon.outdated.description": {
-        "message": "Aggiorna il servizio NetBird per usare questa app."
+        "message": "La nuova GUI non è compatibile con il tuo client precedente. Aggiorna il client per usare la nuova applicazione."
+    },
+    "daemon.outdated.download": {
+        "message": "Scarica l'ultima versione"
     },
     "error.jwt_clock_skew": {
         "message": "Accesso non riuscito: l'orologio di questo dispositivo non è sincronizzato con il server. Sincronizzi l'orologio di sistema e riprovi."

client/ui/i18n/locales/ja/common.json

@@ -1034,9 +1034,15 @@
     "welcome.title": {
         "message": "トレイの NetBird を確認してください"
     },
+    "welcome.titleMac": {
+        "message": "メニューバーの NetBird を確認してください"
+    },
     "welcome.description": {
         "message": "NetBird はトレイに常駐します。アイコンをクリックして、接続、プロファイルの切り替え、設定を開くことができます。"
     },
+    "welcome.descriptionMac": {
+        "message": "NetBird はメニューバーに常駐します。アイコンをクリックして、接続、プロファイルの切り替え、設定を開くことができます。"
+    },
     "welcome.continue": {
         "message": "続ける"
     },

client/ui/i18n/locales/pt/common.json

@@ -1034,9 +1034,15 @@
     "welcome.title": {
         "message": "Procure o NetBird na sua bandeja"
     },
+    "welcome.titleMac": {
+        "message": "Procure o NetBird na sua barra de menus"
+    },
     "welcome.description": {
         "message": "O NetBird fica na sua bandeja. Clique no ícone para conectar, alternar perfis ou abrir as configurações."
     },
+    "welcome.descriptionMac": {
+        "message": "O NetBird fica na sua barra de menus. Clique no ícone para conectar, alternar perfis ou abrir as configurações."
+    },
     "welcome.continue": {
         "message": "Continuar"
     },
@@ -1293,10 +1299,13 @@
         "message": "Documentação"
     },
     "daemon.outdated.title": {
-        "message": "O serviço NetBird está desatualizado"
+        "message": "O NetBird Client está desatualizado"
     },
     "daemon.outdated.description": {
-        "message": "Atualize o serviço NetBird para usar este aplicativo."
+        "message": "A nova GUI não é compatível com o seu cliente mais antigo. Atualize o seu cliente para usar o novo aplicativo."
+    },
+    "daemon.outdated.download": {
+        "message": "Baixar a versão mais recente"
     },
     "error.jwt_clock_skew": {
         "message": "Falha no login: o relógio deste dispositivo está fora de sincronia com o servidor. Sincronize o relógio do sistema e tente novamente."

client/ui/i18n/locales/ru/common.json

@@ -1034,9 +1034,15 @@
     "welcome.title": {
         "message": "Найдите NetBird в системном трее"
     },
+    "welcome.titleMac": {
+        "message": "Найдите NetBird в строке меню"
+    },
     "welcome.description": {
         "message": "NetBird находится в системном трее. Нажмите на значок, чтобы подключиться, переключить профиль или открыть настройки."
     },
+    "welcome.descriptionMac": {
+        "message": "NetBird находится в строке меню. Нажмите на значок, чтобы подключиться, переключить профиль или открыть настройки."
+    },
     "welcome.continue": {
         "message": "Продолжить"
     },
@@ -1293,10 +1299,13 @@
         "message": "Документация"
     },
     "daemon.outdated.title": {
-        "message": "Служба NetBird устарела"
+        "message": "Клиент NetBird устарел"
     },
     "daemon.outdated.description": {
-        "message": "Обновите службу NetBird, чтобы использовать это приложение."
+        "message": "Новый GUI несовместим с вашим более старым клиентом. Обновите клиент, чтобы использовать новое приложение."
+    },
+    "daemon.outdated.download": {
+        "message": "Скачать последнюю версию"
     },
     "error.jwt_clock_skew": {
         "message": "Не удалось войти: часы этого устройства рассинхронизированы с сервером. Синхронизируйте системные часы и повторите попытку."

client/ui/i18n/locales/zh-CN/common.json

@@ -1034,9 +1034,15 @@
     "welcome.title": {
         "message": "在托盘中查找 NetBird"
     },
+    "welcome.titleMac": {
+        "message": "在菜单栏中查找 NetBird"
+    },
     "welcome.description": {
         "message": "NetBird 驻留在您的托盘中。点击图标即可连接、切换配置文件或打开设置。"
     },
+    "welcome.descriptionMac": {
+        "message": "NetBird 驻留在您的菜单栏中。点击图标即可连接、切换配置文件或打开设置。"
+    },
     "welcome.continue": {
         "message": "继续"
     },
@@ -1293,10 +1299,13 @@
         "message": "文档"
     },
     "daemon.outdated.title": {
-        "message": "NetBird 服务版本过旧"
+        "message": "NetBird 客户端版本过旧"
     },
     "daemon.outdated.description": {
-        "message": "请更新 NetBird 服务以使用此应用。"
+        "message": "新版 GUI 与您较旧的客户端不兼容。请更新客户端以使用新应用。"
+    },
+    "daemon.outdated.download": {
+        "message": "下载最新版本"
     },
     "error.jwt_clock_skew": {
         "message": "登录失败：此设备的时钟与服务器不同步。请同步您的系统时钟后重试。"

client/ui/services/autostart.go

@@ -10,7 +10,7 @@ import (
 	"github.com/wailsapp/wails/v3/pkg/application"
 )
 
-// Autostart facade over Wails' AutostartManager. The OS login-item registration
+// Autostart facade over Wails' AutostartManager. The OS autostart entry registration
 // is the single source of truth; nothing is mirrored to preferences.
 type Autostart struct {
 	mgr *application.AutostartManager

client/ui/services/profileswitcher.go

@@ -12,13 +12,15 @@ import (
 	"github.com/netbirdio/netbird/client/internal/profilemanager"
 )
 
-// ProfileSwitcher holds the reconnect policy shared by the tray and React
-// frontend so both flip profiles identically. The policy keys off prevStatus
-// from DaemonFeed.Get at SwitchActive entry:
+// ProfileSwitcher holds the switch policy shared by the tray and React
+// frontend so both flip profiles identically. SwitchActive (plain selection:
+// header dropdown, tray submenu) always connects after the switch;
+// SwitchActiveNoConnect (manage-profiles screen) never does, so the user can
+// still adjust the management URL before connecting. prevStatus from
+// DaemonFeed.Get at entry only decides the teardown:
 //
-//	Connected/Connecting → Switch + Down + Up; optimistic Connecting paint.
-//	NeedsLogin/LoginFailed/SessionExpired → Switch + Down; clear stale error for re-login.
-//	Idle → Switch only.
+//	Connected/Connecting/NeedsLogin/LoginFailed/SessionExpired → Down first.
+//	Idle → no Down.
 type ProfileSwitcher struct {
 	profiles   *Profiles
 	connection *Connection
@@ -29,29 +31,40 @@ func NewProfileSwitcher(profiles *Profiles, connection *Connection, feed *Daemon
 	return &ProfileSwitcher{profiles: profiles, connection: connection, feed: feed}
 }
 
-// SwitchActive switches to the named profile applying the reconnect policy.
+// SwitchActive switches to the named profile and always connects afterwards.
 func (s *ProfileSwitcher) SwitchActive(ctx context.Context, p ProfileRef) error {
+	return s.switchActive(ctx, p, true)
+}
+
+// SwitchActiveNoConnect switches to the named profile without connecting,
+// tearing down any existing connection first.
+func (s *ProfileSwitcher) SwitchActiveNoConnect(ctx context.Context, p ProfileRef) error {
+	return s.switchActive(ctx, p, false)
+}
+
+func (s *ProfileSwitcher) switchActive(ctx context.Context, p ProfileRef, connect bool) error {
 	prevStatus := ""
-	if st, err := s.feed.Get(ctx); err == nil {
-		prevStatus = st.Status
-	} else {
-		log.Warnf("profileswitcher: get status: %v", err)
+	if s.feed != nil {
+		if st, err := s.feed.Get(ctx); err == nil {
+			prevStatus = st.Status
+		} else {
+			log.Warnf("profileswitcher: get status: %v", err)
+		}
 	}
 
-	wasActive := strings.EqualFold(prevStatus, StatusConnected) ||
-		strings.EqualFold(prevStatus, StatusConnecting)
-	needsDown := wasActive ||
+	needsDown := strings.EqualFold(prevStatus, StatusConnected) ||
+		strings.EqualFold(prevStatus, StatusConnecting) ||
 		strings.EqualFold(prevStatus, StatusNeedsLogin) ||
 		strings.EqualFold(prevStatus, StatusLoginFailed) ||
 		strings.EqualFold(prevStatus, StatusSessionExpired)
 
-	log.Infof("profileswitcher: switch profile=%q prevStatus=%q wasActive=%v needsDown=%v",
-		p.ProfileName, prevStatus, wasActive, needsDown)
+	log.Infof("profileswitcher: switch profile=%q prevStatus=%q connect=%v needsDown=%v",
+		p.ProfileName, prevStatus, connect, needsDown)
 
-	// Optimistic Connecting paint only when wasActive: those prevStatuses emit
-	// stale Connected + transient Idle pushes during Down that must be
-	// suppressed until Up resumes the stream (see DaemonFeed suppression table).
-	if wasActive {
+	// Optimistic Connecting paint plus stale-push suppression during Down (see
+	// DaemonFeed suppression table); also arms the login-watch that pops
+	// browser-login when the new profile turns out to need SSO.
+	if connect && s.feed != nil {
 		s.feed.BeginProfileSwitch()
 	}
 
@@ -76,9 +89,9 @@ func (s *ProfileSwitcher) SwitchActive(ctx context.Context, p ProfileRef) error
 		}
 	}
 
-	if wasActive {
+	if connect {
 		if err := s.connection.Up(ctx, UpParams(p)); err != nil {
-			return fmt.Errorf("reconnect %q: %w", p.ProfileName, err)
+			return fmt.Errorf("connect %q: %w", p.ProfileName, err)
 		}
 	}
 

client/ui/services/windowmanager.go

@@ -185,37 +185,38 @@ func (s *WindowManager) OpenBrowserLogin(uri string) {
 			startURL = "/#/dialog/browser-login?uri=" + url.QueryEscape(uri)
 		}
 		s.hideOtherWindowsLocked("browser-login")
-		// Prefer the main window's screen (multi-monitor); falls back to OS-default centering.
-		var screen *application.Screen
-		if s.mainWindow != nil {
-			if sc, err := s.mainWindow.GetScreen(); err == nil {
-				screen = sc
-			}
-		}
 		opts := DialogWindowOptions("browser-login", s.title("window.title.signIn"), startURL, s.linuxIcon)
 		// Not always-on-top: it would obscure the browser tab the user logs in through.
 		opts.AlwaysOnTop = false
 		opts.InitialPosition = application.WindowCentered
-		opts.Screen = screen
+		// Open on the active (where users cursor is) display, like the session-expiration dialog.
+		opts.Screen = s.getScreenBasedOnCursorPosition()
 		s.browserLogin = s.app.Window.NewWithOptions(opts)
 		bl := s.browserLogin
-		// Red-X close means cancel: emit the event so startLogin() tears down the SSO wait.
 		bl.OnWindowEvent(events.Common.WindowClosing, func(_ *application.WindowEvent) {
-			s.app.Event.Emit(EventBrowserLoginCancel)
 			s.mu.Lock()
-			s.browserLogin = nil
-			s.restoreHiddenWindowsLocked()
+			// Only a live user red-X still has this registered; programmatic closers
+			// nil s.browserLogin first and clean up themselves. Guarding here stops a
+			// stale close event from wiping a replacement popup's state.
+			userClosed := s.browserLogin == bl
+			if userClosed {
+				s.browserLogin = nil
+				s.restoreHiddenWindowsLocked()
+			}
 			s.mu.Unlock()
+			if userClosed {
+				s.app.Event.Emit(EventBrowserLoginCancel)
+			}
 		})
-		s.centerWhenReady(s.browserLogin)
+		s.centerOnCursorScreen(s.browserLogin)
 		return
 	}
 	if uri != "" {
 		s.browserLogin.SetURL("/#/dialog/browser-login?uri=" + url.QueryEscape(uri))
 	}
+	s.centerOnCursorScreen(s.browserLogin)
 	s.browserLogin.Show()
 	s.browserLogin.Focus()
-	s.centerWhenReady(s.browserLogin)
 }
 
 // BrowserLoginWindow returns the live SSO popup, or nil. While non-nil it is the
@@ -238,6 +239,15 @@ func (s *WindowManager) CloseBrowserLogin() {
 	s.mu.Lock()
 	w := s.browserLogin
 	s.browserLogin = nil
+	// The WindowClosing hook no-ops on a programmatic close, so restore here —
+	// but only if a popup was actually open. The frontend calls this even when no
+	// popup was ever shown (e.g. resetDialog() after an early RequestExtend failure,
+	// or connection.ts's catch path), and hiddenForLogin is shared with
+	// OpenInstallProgress, so an unconditional restore could re-show windows a
+	// still-running install-progress is hiding.
+	if w != nil {
+		s.restoreHiddenWindowsLocked()
+	}
 	s.mu.Unlock()
 	if w != nil {
 		w.Close()
@@ -279,6 +289,35 @@ func (s *WindowManager) CloseSessionExpiration() {
 	}
 }
 
+// CloseRenewFlow tears down the SSO session-renewal UI in a single call: it
+// closes the browser-login popup and the session-expiration window together.
+func (s *WindowManager) CloseRenewFlow() {
+	s.mu.Lock()
+	bl := s.browserLogin
+	se := s.sessionExpiration
+	s.browserLogin = nil
+	s.sessionExpiration = nil
+	if se != nil {
+		kept := s.hiddenForLogin[:0]
+		for _, w := range s.hiddenForLogin {
+			if w != se {
+				kept = append(kept, w)
+			}
+		}
+		s.hiddenForLogin = kept
+	}
+	s.restoreHiddenWindowsLocked()
+	s.mu.Unlock()
+
+	// Close after unlock so the re-entrant handlers can take s.mu.
+	if bl != nil {
+		bl.Close()
+	}
+	if se != nil {
+		se.Close()
+	}
+}
+
 // OpenInstallProgress shows the install-progress window and hides the rest for the duration
 // (restored on close). It owns its own result polling since the daemon restarts mid-install.
 func (s *WindowManager) OpenInstallProgress(version string) {

client/ui/tray.go

@@ -30,6 +30,8 @@ const (
 
 	statusError = "Error"
 
+	quitDownTimeout = 5 * time.Second
+
 	urlGitHubRepo     = "https://github.com/netbirdio/netbird"
 	urlGitHubReleases = "https://github.com/netbirdio/netbird/releases/latest"
 	urlDocs           = "https://docs.netbird.io"
@@ -315,8 +317,7 @@ func (t *Tray) relayoutMenu() {
 		if sessionDeadline.IsZero() {
 			t.sessionExpiresItem.SetHidden(true)
 		} else {
-			remaining := t.formatSessionRemaining(time.Until(sessionDeadline))
-			t.sessionExpiresItem.SetLabel(t.loc.T("tray.session.expiresIn", "remaining", remaining))
+			t.sessionExpiresItem.SetLabel(t.sessionRowLabel(sessionDeadline))
 			t.sessionExpiresItem.SetHidden(false)
 		}
 	}
@@ -446,11 +447,28 @@ func (t *Tray) buildMenu() *application.Menu {
 	menu.AddSeparator()
 	menu.Add(t.loc.T("tray.menu.quit")).
 		SetAccelerator("CmdOrCtrl+Q").
-		OnClick(func(*application.Context) { t.app.Quit() })
+		OnClick(func(*application.Context) { t.handleQuit() })
 
 	return menu
 }
 
+func (t *Tray) handleQuit() {
+	t.profileMu.Lock()
+	if t.switchCancel != nil {
+		t.switchCancel()
+		t.switchCancel = nil
+	}
+	t.profileMu.Unlock()
+	t.svc.DaemonFeed.CancelProfileSwitch()
+
+	ctx, cancel := context.WithTimeout(context.Background(), quitDownTimeout)
+	defer cancel()
+	if err := t.svc.Connection.Down(ctx); err != nil {
+		log.Errorf("disconnect on quit: %v", err)
+	}
+	t.app.Quit()
+}
+
 // handleConnect receives the clicked item from the buildMenu closure —
 // t.upItem is menuMu-guarded and must not be read here.
 func (t *Tray) handleConnect(upItem *application.MenuItem) {

client/ui/tray_session.go

@@ -64,11 +64,42 @@ func (t *Tray) applySessionExpiry(deadline *time.Time, connected bool) bool {
 	return changed
 }
 
-// runSessionExpiryTicker recomputes the "Expires in …" row label every 30s. Runs until process exit.
+// runSessionExpiryTicker recomputes the "Expires in …" row label until process exit.
+// The interval scales with the remaining time: coarse when the deadline is far off,
+// down to 10s in the final two minutes so the label doesn't lag the ceiling-rounded
+// countdown near expiry. The cached deadline is re-read every iteration, so an extend
+// or reconnect that moves it is picked up on the next tick.
 func (t *Tray) runSessionExpiryTicker() {
-	tk := time.NewTicker(30 * time.Second)
-	for range tk.C {
+	tm := time.NewTimer(sessionRefreshInterval(t.sessionRemaining()))
+	defer tm.Stop()
+	for range tm.C {
 		t.refreshSessionExpiresLabel()
+		tm.Reset(sessionRefreshInterval(t.sessionRemaining()))
+	}
+}
+
+// sessionRemaining returns the time left on the cached SSO deadline, or 0 when unknown.
+func (t *Tray) sessionRemaining() time.Duration {
+	t.sessionMu.Lock()
+	deadline := t.sessionExpiresAt
+	t.sessionMu.Unlock()
+	if deadline.IsZero() {
+		return 0
+	}
+	return time.Until(deadline)
+}
+
+// sessionRefreshInterval picks how long to wait before the next label recompute.
+func sessionRefreshInterval(remaining time.Duration) time.Duration {
+	switch {
+	case remaining <= 0:
+		return 30 * time.Second
+	case remaining <= 2*time.Minute:
+		return 10 * time.Second
+	case remaining <= time.Hour:
+		return 30 * time.Second
+	default:
+		return time.Minute
 	}
 }
 
@@ -87,30 +118,39 @@ func (t *Tray) refreshSessionExpiresLabel() {
 	if deadline.IsZero() {
 		return
 	}
-	remaining := t.formatSessionRemaining(time.Until(deadline))
-	item.SetLabel(t.loc.T("tray.session.expiresIn", "remaining", remaining))
+	item.SetLabel(t.sessionRowLabel(deadline))
+}
+
+func (t *Tray) sessionRowLabel(deadline time.Time) string {
+	remaining := time.Until(deadline)
+	if remaining <= 0 {
+		return t.loc.T("tray.status.sessionExpired")
+	}
+	return t.loc.T("tray.session.expiresIn", "remaining", t.formatSessionRemaining(remaining))
 }
 
 // formatSessionRemaining renders d as a localised long-form string picking the largest non-zero unit.
+// Each unit is rounded up so the label never claims less time than actually remains, matching the
+// upper-bound sense of the sub-minute "less than a minute" fragment.
 // Singular/plural keys are split per language for proper translation.
 func (t *Tray) formatSessionRemaining(d time.Duration) string {
 	switch {
 	case d < time.Minute:
 		return t.loc.T("tray.session.unit.lessThanMinute")
-	case d < time.Hour:
-		m := int(d / time.Minute)
+	case d <= 59*time.Minute:
+		m := ceilDiv(d, time.Minute)
 		if m == 1 {
 			return t.loc.T("tray.session.unit.minute")
 		}
 		return t.loc.T("tray.session.unit.minutes", "count", strconv.Itoa(m))
-	case d < 24*time.Hour:
-		h := int((d + 30*time.Minute) / time.Hour)
+	case d <= 23*time.Hour:
+		h := ceilDiv(d, time.Hour)
 		if h == 1 {
 			return t.loc.T("tray.session.unit.hour")
 		}
 		return t.loc.T("tray.session.unit.hours", "count", strconv.Itoa(h))
 	default:
-		days := int((d + 12*time.Hour) / (24 * time.Hour))
+		days := ceilDiv(d, 24*time.Hour)
 		if days == 1 {
 			return t.loc.T("tray.session.unit.day")
 		}
@@ -118,6 +158,11 @@ func (t *Tray) formatSessionRemaining(d time.Duration) string {
 	}
 }
 
+// ceilDiv divides d by unit rounding up, assuming d > 0.
+func ceilDiv(d, unit time.Duration) int {
+	return int((d + unit - time.Nanosecond) / unit)
+}
+
 // registerSessionWarningCategory wires the OS notification category and response handler for the expiry warning.
 // Errors are swallowed since the worst case is a plain notification without buttons.
 func (t *Tray) registerSessionWarningCategory() {
@@ -252,11 +297,9 @@ func (t *Tray) openSessionExpiration() {
 }
 
 // openSessionExtendFlow opens the SessionExpiration window seeded with the cached deadline's remaining time,
-// for the "Expires in …" tray row. No-ops when the deadline is unknown or elapsed.
+// for the "Expires in …" tray row. Once the deadline has elapsed the row reads "Session expired" and the
+// click routes to the login flow instead. No-op when the deadline is unknown.
 func (t *Tray) openSessionExtendFlow() {
-	if t.svc.WindowManager == nil {
-		return
-	}
 	t.sessionMu.Lock()
 	deadline := t.sessionExpiresAt
 	t.sessionMu.Unlock()
@@ -265,6 +308,14 @@ func (t *Tray) openSessionExtendFlow() {
 	}
 	seconds := int(time.Until(deadline).Seconds())
 	if seconds <= 0 {
+		if t.window != nil {
+			t.window.SetURL("/#/login")
+			t.window.Show()
+			t.window.Focus()
+		}
+		return
+	}
+	if t.svc.WindowManager == nil {
 		return
 	}
 	t.svc.WindowManager.OpenSessionExpiration(seconds)

docs/io.netbird.client.plist

@@ -66,6 +66,9 @@
     <key>disableAutoConnect</key>
     <false/>
 
+    <key>disableAutostart</key>
+    <false/>
+
     <key>disableClientRoutes</key>
     <false/>
 

docs/netbird-macos.mobileconfig

@@ -103,6 +103,8 @@
                                 <!--
                                 <key>disableAutoConnect</key>
                                 <false/>
+                                <key>disableAutostart</key>
+                                <false/>
                                 <key>disableClientRoutes</key>
                                 <false/>
                                 <key>disableServerRoutes</key>

docs/netbird-macos.sh

@@ -58,6 +58,7 @@ preSharedKey="$NULL"                       # secret; redacted in log
 allowServerSSH='true'
 blockInbound="$NULL"
 disableAutoConnect="$NULL"
+disableAutostart="$NULL"
 disableClientRoutes="$NULL"
 disableServerRoutes="$NULL"
 disableMetricsCollection="$NULL"
@@ -155,6 +156,7 @@ main() {
   is_set "$allowServerSSH"            && emit_bool    allowServerSSH            "$allowServerSSH"
   is_set "$blockInbound"              && emit_bool    blockInbound              "$blockInbound"
   is_set "$disableAutoConnect"        && emit_bool    disableAutoConnect        "$disableAutoConnect"
+  is_set "$disableAutostart"          && emit_bool    disableAutostart          "$disableAutostart"
   is_set "$disableClientRoutes"       && emit_bool    disableClientRoutes       "$disableClientRoutes"
   is_set "$disableServerRoutes"       && emit_bool    disableServerRoutes       "$disableServerRoutes"
   is_set "$disableMetricsCollection"  && emit_bool    disableMetricsCollection  "$disableMetricsCollection"

docs/netbird.adml

@@ -24,6 +24,9 @@
       <string id="DisableAutoConnect_Name">Disable auto-connect</string>
       <string id="DisableAutoConnect_Help">When enabled, the NetBird tunnel does not auto-connect at daemon startup. Equivalent to --disable-auto-connect.</string>
 
+      <string id="DisableAutostart_Name">Disable autostart</string>
+      <string id="DisableAutostart_Help">When enabled, the NetBird GUI is prevented from registering itself as an OS autostart entry on fresh installs, and any existing OS autostart entry registration is removed on the next GUI launch (Windows Registry Run key, macOS Login Item, Linux .desktop). Once the admin lifts the policy, the setting stays off until the user re-enables it in Settings.</string>
+
       <string id="DisableClientRoutes_Name">Disable client routes</string>
       <string id="DisableClientRoutes_Help">When enabled, this client will not consume routes advertised by routing peers. Equivalent to --disable-client-routes.</string>
 

docs/netbird.admx

@@ -64,6 +64,18 @@
       <disabledValue><decimal value="0" /></disabledValue>
     </policy>
 
+    <policy name="DisableAutostart"
+            class="Machine"
+            displayName="$(string.DisableAutostart_Name)"
+            explainText="$(string.DisableAutostart_Help)"
+            key="Software\Policies\NetBird"
+            valueName="DisableAutostart">
+      <parentCategory ref="NetBird" />
+      <supportedOn ref="SUPPORTED_NetBird_All" />
+      <enabledValue><decimal value="1" /></enabledValue>
+      <disabledValue><decimal value="0" /></disabledValue>
+    </policy>
+
     <policy name="DisableClientRoutes"
             class="Machine"
             displayName="$(string.DisableClientRoutes_Name)"

go.mod

@@ -31,11 +31,11 @@ require (
 require (
 	github.com/DeRuina/timberjack v1.4.2
 	github.com/awnumar/memguard v0.23.0
-	github.com/aws/aws-sdk-go-v2 v1.38.3
-	github.com/aws/aws-sdk-go-v2/aws/protocol/eventstream v1.7.1
+	github.com/aws/aws-sdk-go-v2 v1.43.0
+	github.com/aws/aws-sdk-go-v2/aws/protocol/eventstream v1.7.14
 	github.com/aws/aws-sdk-go-v2/config v1.31.6
 	github.com/aws/aws-sdk-go-v2/credentials v1.18.10
-	github.com/aws/aws-sdk-go-v2/service/s3 v1.87.3
+	github.com/aws/aws-sdk-go-v2/service/s3 v1.106.0
 	github.com/c-robinson/iplib v1.0.3
 	github.com/caddyserver/certmagic v0.21.3
 	github.com/cilium/ebpf v0.19.0
@@ -163,19 +163,19 @@ require (
 	github.com/asaskevich/govalidator v0.0.0-20230301143203-a9d515a09cc2 // indirect
 	github.com/awnumar/memcall v0.4.0 // indirect
 	github.com/aws/aws-sdk-go-v2/feature/ec2/imds v1.18.6 // indirect
-	github.com/aws/aws-sdk-go-v2/internal/configsources v1.4.6 // indirect
-	github.com/aws/aws-sdk-go-v2/internal/endpoints/v2 v2.7.6 // indirect
+	github.com/aws/aws-sdk-go-v2/internal/configsources v1.4.31 // indirect
+	github.com/aws/aws-sdk-go-v2/internal/endpoints/v2 v2.7.31 // indirect
 	github.com/aws/aws-sdk-go-v2/internal/ini v1.8.3 // indirect
-	github.com/aws/aws-sdk-go-v2/internal/v4a v1.4.6 // indirect
-	github.com/aws/aws-sdk-go-v2/service/internal/accept-encoding v1.13.1 // indirect
-	github.com/aws/aws-sdk-go-v2/service/internal/checksum v1.8.6 // indirect
-	github.com/aws/aws-sdk-go-v2/service/internal/presigned-url v1.13.6 // indirect
-	github.com/aws/aws-sdk-go-v2/service/internal/s3shared v1.19.6 // indirect
+	github.com/aws/aws-sdk-go-v2/internal/v4a v1.4.32 // indirect
+	github.com/aws/aws-sdk-go-v2/service/internal/accept-encoding v1.13.13 // indirect
+	github.com/aws/aws-sdk-go-v2/service/internal/checksum v1.9.24 // indirect
+	github.com/aws/aws-sdk-go-v2/service/internal/presigned-url v1.13.31 // indirect
+	github.com/aws/aws-sdk-go-v2/service/internal/s3shared v1.19.32 // indirect
 	github.com/aws/aws-sdk-go-v2/service/route53 v1.42.3 // indirect
 	github.com/aws/aws-sdk-go-v2/service/sso v1.29.1 // indirect
 	github.com/aws/aws-sdk-go-v2/service/ssooidc v1.34.2 // indirect
 	github.com/aws/aws-sdk-go-v2/service/sts v1.38.2 // indirect
-	github.com/aws/smithy-go v1.23.0 // indirect
+	github.com/aws/smithy-go v1.27.3 // indirect
 	github.com/beevik/etree v1.6.0 // indirect
 	github.com/beorn7/perks v1.0.1 // indirect
 	github.com/boombuler/barcode v1.0.1-0.20190219062509-6c824513bacc // indirect

go.sum

@@ -50,44 +50,44 @@ github.com/awnumar/memcall v0.4.0 h1:B7hgZYdfH6Ot1Goaz8jGne/7i8xD4taZie/PNSFZ29g
 github.com/awnumar/memcall v0.4.0/go.mod h1:8xOx1YbfyuCg3Fy6TO8DK0kZUua3V42/goA5Ru47E8w=
 github.com/awnumar/memguard v0.23.0 h1:sJ3a1/SWlcuKIQ7MV+R9p0Pvo9CWsMbGZvcZQtmc68A=
 github.com/awnumar/memguard v0.23.0/go.mod h1:olVofBrsPdITtJ2HgxQKrEYEMyIBAIciVG4wNnZhW9M=
-github.com/aws/aws-sdk-go-v2 v1.38.3 h1:B6cV4oxnMs45fql4yRH+/Po/YU+597zgWqvDpYMturk=
-github.com/aws/aws-sdk-go-v2 v1.38.3/go.mod h1:sDioUELIUO9Znk23YVmIk86/9DOpkbyyVb1i/gUNFXY=
-github.com/aws/aws-sdk-go-v2/aws/protocol/eventstream v1.7.1 h1:i8p8P4diljCr60PpJp6qZXNlgX4m2yQFpYk+9ZT+J4E=
-github.com/aws/aws-sdk-go-v2/aws/protocol/eventstream v1.7.1/go.mod h1:ddqbooRZYNoJ2dsTwOty16rM+/Aqmk/GOXrK8cg7V00=
+github.com/aws/aws-sdk-go-v2 v1.43.0 h1:fharf/WhbRAVZ1du0QL7roNFxZ6T/sWr+4Ni617bwSI=
+github.com/aws/aws-sdk-go-v2 v1.43.0/go.mod h1:5pKeft2eJj+gElQ38Jqg4ibCqh+/AK33/0X3hip7IjM=
+github.com/aws/aws-sdk-go-v2/aws/protocol/eventstream v1.7.14 h1:3IZY0XAJquT3aHzbkHfPzy4ACPcEjVG0x87KOwtpqGY=
+github.com/aws/aws-sdk-go-v2/aws/protocol/eventstream v1.7.14/go.mod h1:zwM6veDkhGgQFqkBy+uT28AAYpLu+uFMlPl+rCg/73E=
 github.com/aws/aws-sdk-go-v2/config v1.31.6 h1:a1t8fXY4GT4xjyJExz4knbuoxSCacB5hT/WgtfPyLjo=
 github.com/aws/aws-sdk-go-v2/config v1.31.6/go.mod h1:5ByscNi7R+ztvOGzeUaIu49vkMk2soq5NaH5PYe33MQ=
 github.com/aws/aws-sdk-go-v2/credentials v1.18.10 h1:xdJnXCouCx8Y0NncgoptztUocIYLKeQxrCgN6x9sdhg=
 github.com/aws/aws-sdk-go-v2/credentials v1.18.10/go.mod h1:7tQk08ntj914F/5i9jC4+2HQTAuJirq7m1vZVIhEkWs=
 github.com/aws/aws-sdk-go-v2/feature/ec2/imds v1.18.6 h1:wbjnrrMnKew78/juW7I2BtKQwa1qlf6EjQgS69uYY14=
 github.com/aws/aws-sdk-go-v2/feature/ec2/imds v1.18.6/go.mod h1:AtiqqNrDioJXuUgz3+3T0mBWN7Hro2n9wll2zRUc0ww=
-github.com/aws/aws-sdk-go-v2/internal/configsources v1.4.6 h1:uF68eJA6+S9iVr9WgX1NaRGyQ/6MdIyc4JNUo6TN1FA=
-github.com/aws/aws-sdk-go-v2/internal/configsources v1.4.6/go.mod h1:qlPeVZCGPiobx8wb1ft0GHT5l+dc6ldnwInDFaMvC7Y=
-github.com/aws/aws-sdk-go-v2/internal/endpoints/v2 v2.7.6 h1:pa1DEC6JoI0zduhZePp3zmhWvk/xxm4NB8Hy/Tlsgos=
-github.com/aws/aws-sdk-go-v2/internal/endpoints/v2 v2.7.6/go.mod h1:gxEjPebnhWGJoaDdtDkA0JX46VRg1wcTHYe63OfX5pE=
+github.com/aws/aws-sdk-go-v2/internal/configsources v1.4.31 h1:Z8F3hfCY33IGpJjFAnv0wvtv1FIKj1GHmRDEYqy64tw=
+github.com/aws/aws-sdk-go-v2/internal/configsources v1.4.31/go.mod h1:aVyUoytEyOViR6jhq6jula0xkc5NfBE2hgeF6BvOrao=
+github.com/aws/aws-sdk-go-v2/internal/endpoints/v2 v2.7.31 h1:hyOxUyXdh3AyjE93gBgsfziJag9ACwcs+ZpDBLzi8mw=
+github.com/aws/aws-sdk-go-v2/internal/endpoints/v2 v2.7.31/go.mod h1:OERqI9k0draSLB8O8woxY3q25ZWTELRK4RRoLMuMZFo=
 github.com/aws/aws-sdk-go-v2/internal/ini v1.8.3 h1:bIqFDwgGXXN1Kpp99pDOdKMTTb5d2KyU5X/BZxjOkRo=
 github.com/aws/aws-sdk-go-v2/internal/ini v1.8.3/go.mod h1:H5O/EsxDWyU+LP/V8i5sm8cxoZgc2fdNR9bxlOFrQTo=
-github.com/aws/aws-sdk-go-v2/internal/v4a v1.4.6 h1:R0tNFJqfjHL3900cqhXuwQ+1K4G0xc9Yf8EDbFXCKEw=
-github.com/aws/aws-sdk-go-v2/internal/v4a v1.4.6/go.mod h1:y/7sDdu+aJvPtGXr4xYosdpq9a6T9Z0jkXfugmti0rI=
-github.com/aws/aws-sdk-go-v2/service/internal/accept-encoding v1.13.1 h1:oegbebPEMA/1Jny7kvwejowCaHz1FWZAQ94WXFNCyTM=
-github.com/aws/aws-sdk-go-v2/service/internal/accept-encoding v1.13.1/go.mod h1:kemo5Myr9ac0U9JfSjMo9yHLtw+pECEHsFtJ9tqCEI8=
-github.com/aws/aws-sdk-go-v2/service/internal/checksum v1.8.6 h1:hncKj/4gR+TPauZgTAsxOxNcvBayhUlYZ6LO/BYiQ30=
-github.com/aws/aws-sdk-go-v2/service/internal/checksum v1.8.6/go.mod h1:OiIh45tp6HdJDDJGnja0mw8ihQGz3VGrUflLqSL0SmM=
-github.com/aws/aws-sdk-go-v2/service/internal/presigned-url v1.13.6 h1:LHS1YAIJXJ4K9zS+1d/xa9JAA9sL2QyXIQCQFQW/X08=
-github.com/aws/aws-sdk-go-v2/service/internal/presigned-url v1.13.6/go.mod h1:c9PCiTEuh0wQID5/KqA32J+HAgZxN9tOGXKCiYJjTZI=
-github.com/aws/aws-sdk-go-v2/service/internal/s3shared v1.19.6 h1:nEXUSAwyUfLTgnc9cxlDWy637qsq4UWwp3sNAfl0Z3Y=
-github.com/aws/aws-sdk-go-v2/service/internal/s3shared v1.19.6/go.mod h1:HGzIULx4Ge3Do2V0FaiYKcyKzOqwrhUZgCI77NisswQ=
+github.com/aws/aws-sdk-go-v2/internal/v4a v1.4.32 h1:0MrUL35H/Y4kdFfItoR5jCgtDQ4Z/8LudAoIHRfA4hE=
+github.com/aws/aws-sdk-go-v2/internal/v4a v1.4.32/go.mod h1:2tNZkuWz54arj8mHVf+8Y7cKkcD8Wr/fBpENgEXpjLc=
+github.com/aws/aws-sdk-go-v2/service/internal/accept-encoding v1.13.13 h1:mbRIur/BiHK6SKPjoBIXSE/hJ6g6JGRLuxQy1jGjlN4=
+github.com/aws/aws-sdk-go-v2/service/internal/accept-encoding v1.13.13/go.mod h1:ITg9em2KbJx1s0y4aqRX5OYWG6HBZ5TVR//OdpEZ2CQ=
+github.com/aws/aws-sdk-go-v2/service/internal/checksum v1.9.24 h1:mdPwDQPqxlw9Sc62Nt15yjEcARaDbPXkjRYtXsUripo=
+github.com/aws/aws-sdk-go-v2/service/internal/checksum v1.9.24/go.mod h1:ls5ytnwLTcQaUu32fMYXFI3MjpKuTwL840PAm9iqyEg=
+github.com/aws/aws-sdk-go-v2/service/internal/presigned-url v1.13.31 h1:w2SIhW92DZPFrSL4ksVCr8IYff5OZwIcxg8+95tzvAI=
+github.com/aws/aws-sdk-go-v2/service/internal/presigned-url v1.13.31/go.mod h1:wAhpCQbkov+IcvjozJbd2xRCoZybUEHNkcFunssNACg=
+github.com/aws/aws-sdk-go-v2/service/internal/s3shared v1.19.32 h1:jWXtZdCnhXa9sGFixRaU2AxT4DIVse9HS4E2f+/KwV0=
+github.com/aws/aws-sdk-go-v2/service/internal/s3shared v1.19.32/go.mod h1:9JS1UpfVvyD/ZPX8GsKb/Pq8scEM+7GP5fqh9SwH7po=
 github.com/aws/aws-sdk-go-v2/service/route53 v1.42.3 h1:MmLCRqP4U4Cw9gJ4bNrCG0mWqEtBlmAVleyelcHARMU=
 github.com/aws/aws-sdk-go-v2/service/route53 v1.42.3/go.mod h1:AMPjK2YnRh0YgOID3PqhJA1BRNfXDfGOnSsKHtAe8yA=
-github.com/aws/aws-sdk-go-v2/service/s3 v1.87.3 h1:ETkfWcXP2KNPLecaDa++5bsQhCRa5M5sLUJa5DWYIIg=
-github.com/aws/aws-sdk-go-v2/service/s3 v1.87.3/go.mod h1:+/3ZTqoYb3Ur7DObD00tarKMLMuKg8iqz5CHEanqTnw=
+github.com/aws/aws-sdk-go-v2/service/s3 v1.106.0 h1:7QZWVJZWzHivHWIa+5TELLaBBkbuoj0GPwQtMlJ0sqk=
+github.com/aws/aws-sdk-go-v2/service/s3 v1.106.0/go.mod h1:fcvq5L7dK+5cQFicEJwpI6e6Wn8NY2i6yT5wRLYVc7s=
 github.com/aws/aws-sdk-go-v2/service/sso v1.29.1 h1:8OLZnVJPvjnrxEwHFg9hVUof/P4sibH+Ea4KKuqAGSg=
 github.com/aws/aws-sdk-go-v2/service/sso v1.29.1/go.mod h1:27M3BpVi0C02UiQh1w9nsBEit6pLhlaH3NHna6WUbDE=
 github.com/aws/aws-sdk-go-v2/service/ssooidc v1.34.2 h1:gKWSTnqudpo8dAxqBqZnDoDWCiEh/40FziUjr/mo6uA=
 github.com/aws/aws-sdk-go-v2/service/ssooidc v1.34.2/go.mod h1:x7+rkNmRoEN1U13A6JE2fXne9EWyJy54o3n6d4mGaXQ=
 github.com/aws/aws-sdk-go-v2/service/sts v1.38.2 h1:YZPjhyaGzhDQEvsffDEcpycq49nl7fiGcfJTIo8BszI=
 github.com/aws/aws-sdk-go-v2/service/sts v1.38.2/go.mod h1:2dIN8qhQfv37BdUYGgEC8Q3tteM3zFxTI1MLO2O3J3c=
-github.com/aws/smithy-go v1.23.0 h1:8n6I3gXzWJB2DxBDnfxgBaSX6oe0d/t10qGz7OKqMCE=
-github.com/aws/smithy-go v1.23.0/go.mod h1:t1ufH5HMublsJYulve2RKmHDC15xu1f26kHCp/HgceI=
+github.com/aws/smithy-go v1.27.3 h1:F3Zb497UhhskkfpJmfkXswyo+t0sh9OTBnIHjogWbVY=
+github.com/aws/smithy-go v1.27.3/go.mod h1:YE2RhdIuDbA5E5bTdciG9KrW3+TiEONeUWCqxX9i1Fc=
 github.com/beevik/etree v1.6.0 h1:u8Kwy8pp9D9XeITj2Z0XtA5qqZEmtJtuXZRQi+j03eE=
 github.com/beevik/etree v1.6.0/go.mod h1:bh4zJxiIr62SOf9pRzN7UUYaEDa9HEKafK25+sLc0Gc=
 github.com/beorn7/perks v1.0.1 h1:VlbKKnNfV8bJzeqoa4cOKqO6bYr3WgKZxO8Z16+hsOM=

proxy/Dockerfile.multistage

@@ -14,6 +14,7 @@ COPY proxy ./proxy
 COPY route ./route
 COPY shared ./shared
 COPY sharedsock ./sharedsock
+COPY trustedproxy ./trustedproxy
 COPY upload-server ./upload-server
 COPY util ./util
 COPY version ./version