- introduce variables to avoid publishing latest docker tags and installers
- Refactor .goreleaser.yaml to simplify docker configurations and add environment-driven flags
- removed management debug containers (it was doing only log var)
- Stopped building arm v6 32bits in favor of v7 32 bits for services (not client)
- Add target argument to docker files
* [client] Index peer tunnel IPs for O(1) PeerStateByIP lookup
Replace the linear scan over all peers with an ipToKey map maintained
by AddPeer/RemovePeer, covering both IPv4 and IPv6 tunnel addresses.
Offline peers are intentionally no longer resolvable by IP: only active
peers can carry traffic, so IdentityForIP and the DNS disconnected-peer
filter now treat them as unknown, same as foreign IPs.
Skip the DNS answer filter for single-record responses; dropping the
only answer was always restored by the empty-answer escape hatch, so
the fast path is behavior-neutral.
* Ensure `ipToKey` entries are only removed if they match the peer being deleted, preventing accidental removal of unrelated mappings.
- Engine.Start takes syncMsgMux with a deferred unlock (engine.go:445) and parks in receiveSignalEvents → WaitStreamConnected (engine.go:1762), which only wakes on
signal-stream connect or client-context cancellation.
- When signal never connects, the 30s startup timeout fires and embed.Client.Start's rollback (embed.go:281) called client.Stop() → Engine.Stop, which blocks acquiring
syncMsgMux (engine.go:318). The cancel() that would unpark Start was deferred until Start returned — permanent cycle. RemovePeer calls (g43/g385) then queue behind the
lifecycle mutex.
- Notably, embed.Client.Stop and the daemon's cleanupConnection both cancel before stopping — the startup rollback was the only path that didn't.
- Engine.Start takes syncMsgMux with a deferred unlock (engine.go:445) and parks in receiveSignalEvents → WaitStreamConnected (engine.go:1762), which only wakes on
signal-stream connect or client-context cancellation.
- When signal never connects, the 30s startup timeout fires and embed.Client.Start's rollback (embed.go:281) called client.Stop() → Engine.Stop, which blocks acquiring
syncMsgMux (engine.go:318). The cancel() that would unpark Start was deferred until Start returned — permanent cycle. RemovePeer calls (g43/g385) then queue behind the
lifecycle mutex.
- Notably, embed.Client.Stop and the daemon's cleanupConnection both cancel before stopping — the startup rollback was the only path that didn't.
* [management] Add version gate to stop sending deprecated RemotePeers field
don't send top-level remote peers on peers in the v0.29.3 or newer
* precompute deprecated remote peers version constraint
* [management] update tests to validate network map-based remote peers
* [management] move deprecatedRemotePeersVersion constant closer to its usage
* fix misplaced precomputed constraint definition
* ensure top-level RemotePeers is empty for v0.29.3+ clients
private services on a custom domain didn't resolve on clients — the synthesized DNS zone was anchored to the cluster, and the account's custom domains weren't even
loaded.
- account.go — SynthesizePrivateServiceZones now keys zones by a resolved apex (privateServiceDomainZone): cluster suffix → registered account.Domains (filtered by matching
TargetCluster, longest wins) → skip if none. One zone per apex; custom-domain services group under their registered domain.
- sql_store.go — GetAccount now loads account.Domains on both loaders (gorm Preload("Domains") + pgx goroutine via ListCustomDomains; errChan buffer bumped 12→16). This was
the reason the deploy didn't work — the relation was empty in prod.
- Tests — custom-domain zone synthesis cases (apex resolution, free+custom separation, sibling collapse, cluster mismatch, mixed cluster/custom/public) + GetAccount
domain-preload tests on sqlite and Postgres.
* [management] Copy private field on shallowCloneMapping
added test to ensure clone handles new fields
* Remove unnecessary debug logs from proxy service
* Increase Wasm binary size limit to 60MB in build validation
* [infrastructure] allow docker image overrides for getting started
Make dashboard and server image configurations overrideable via environment variables
* [infrastructure] update Traefik gRPC rule to include ProxyService PathPrefix
* make Traefik and CrowdSec images configurable via environment variables
* fix(proxy): gate tunnel-peer fast-path on inbound listener marker
forwardWithTunnelPeer previously accepted any RFC1918 / ULA / CGNAT
source IP, so a public client whose address happened to fall in those
ranges could bypass the configured operator auth scheme by colliding
with a known tunnel IP. The fast-path is now gated on
TunnelLookupFromContext(r.Context()) being present — that context value
is attached only by the per-account inbound (overlay) listener, so the
host-facing listener never enters this branch.
Tests updated to reflect the new requirement: requests that don't
carry the inbound marker now fall through to the regular auth flow.
* fix(proxy): harden inbound listener resource + startup-ctx handling
Three correctness fixes on the per-account inbound path, with tests:
- Close the logrus ErrorLog PipeWriter on tearDown. WriterLevel hands
back an *io.PipeWriter backed by a pipe + scanner goroutine that the
caller owns; the two writers per account (https + plain) were never
closed, leaking the pipe and goroutine on every teardown.
- Run the post-Start hooks on context.Background(). runClientStartup
is launched in a goroutine from AddPeer and was inheriting the
caller's request-scoped ctx, so a cancelled request could abort the
inbound bring-up or fail the management status notification. The
tail is split into notifyClientReady so the contract is testable.
Tests cover the PipeWriter close behaviour and assert the readyHandler
+ NotifyStatus calls receive a non-cancelled background context.
* feat(proxy): short-circuit peer-own-target loops with 421
When a peer that hosts the target of a private service dials its own
service URL the request was being looped through the proxy and back
over WireGuard to the same peer — twice the WG round-trip for no
benefit, with no signal to the caller that something was wrong.
Add isSelfTargetLoop to ReverseProxy.ServeHTTP: when the request
arrived on the per-account overlay listener (IsOverlayOrigin) and the
source tunnel IP matches the target host, refuse the request with 421
Misdirected Request and a body pointing the operator at the backend
directly.
The gate is scoped to overlay origin so requests on the public
listener that happen to share a source IP with the target host are
forwarded normally.
* fix(management): private-service validation + tunnel-IP lookup semantics
- Require an explicit port for L4 cluster targets. validateL4Target
exempted TargetTypeCluster from the port check, but buildPathMappings
serializes every L4 target via net.JoinHostPort(host, port) — port=0
shipped a ":0" upstream. Cluster targets use the same Host/Port
fields, so the same requirement applies.
- GetPeerByIP returns NotFound on a tunnel-IP miss instead of mapping
every error to Internal. The proxy's ValidateTunnelPeer probes IPs
that legitimately aren't in the roster; the miss is expected and now
distinguishable from a real store failure.
- Thread ctx into getClusterCapability's gorm query so a cancelled
request doesn't keep the store busy.
Tests updated for the L4-cluster port requirement and the GetPeerByIP
NotFound path.
* fix(client): include offlinePeers in PeerStateByIP lookup
ReplaceOfflinePeers moves peers into d.offlinePeers but PeerStateByIP
only scanned d.peers. Callers (the local DNS filter via
localPeerConnectivity, embed.Client.IdentityForIP used by the
proxy's tunnel-peer validator) were treating known-but-offline peers
as unknown, which:
- causes the DNS filter to keep returning records pointing at peers
that have no live tunnel, AND
- makes the proxy's local-roster check deny a request from such a
peer rather than letting the cached management RPC carry the
authorisation decision.
Search both slices in PeerStateByIP. Adds a unit test for the IPv4
and IPv6 offline-match paths.
* fix(rest): reject empty Delete path params in reverse-proxy clients
ReverseProxyClustersAPI.Delete and ReverseProxyTokensAPI.Delete passed
the path parameter into url.PathEscape without an empty check.
PathEscape("") returns "" which collapses the request onto the
collection endpoint ("/api/reverse-proxies/clusters/" /
"/api/reverse-proxies/proxy-tokens/"), so a caller bug delete with no
id reached a routable URL with surprising semantics (typically 405).
Short-circuit with a typed error before the request is built. Tests
mount a handler on the collection path that fails the test if hit, so
the regression is impossible to reintroduce silently.
* chore(api,ci,docs,test): private-service schema, proto-check, fixups
Non-functional cleanups and contract/CI hardening around the
private-service work:
API schema (openapi.yml):
- Require a non-empty access_groups and mode=http when private=true,
on both Service and ServiceRequest, mirroring
validatePrivateRequirements. mode stays optional-but-constrained
(empty defaults to http server-side), matching runtime.
CI (proto-version-check.yml):
- Cover renamed .pb.go files (read base via previous_filename).
- Match protoc-gen-go-grpc version headers (optional "- " prefix and
-gen-go-grpc suffix) so grpc-generated files are in scope.
Docs / comments:
- Reword Config field docs to say defaults are applied at Server.Start
(initDefaults), not New.
- Rename the obsolete --private-inbound flag to --private across
comments and the proto doc.
Pre-existing test fixups surfaced by review:
- Repair the integration-tagged validate_session_test.go (SignToken
signature growth + new Manager interface methods).
- Fix the CI-skip boolean precedence so Windows isn't skipped
unconditionally.
- Guard the router.HTTPListener type assertion with comma-ok.
* fix(proxy): background ctx for already-started AddPeer notification
The earlier ctx fix covered the async runClientStartup path but missed
the synchronous branch: when a service is added to an already-started
client, AddPeer called NotifyStatus with the caller's request-scoped
ctx. A cancelled request/stream could drop the connected notification
to management. Use context.Background() here too, matching
notifyClientReady.
Extends TestNetBird_AddPeer_ExistingStartedClient_NotifiesStatus to
pass a pre-cancelled caller ctx and assert the notification still ran
on a non-cancelled context.
* use the cmd context for roundtripper
Adds a new "private" service mode for the reverse proxy: services reachable exclusively over the embedded WireGuard tunnel, gated by per-peer group membership instead of operator auth schemes.
Wire contract
- ProxyMapping.private (field 13): the proxy MUST call ValidateTunnelPeer and fail closed; operator schemes are bypassed.
- ProxyCapabilities.private (4) + supports_private_service (5): capability gate. Management never streams private mappings to proxies that don't claim the capability; the broadcast path applies the same filter via filterMappingsForProxy.
- ValidateTunnelPeer RPC: resolves an inbound tunnel IP to a peer, checks the peer's groups against service.AccessGroups, and mints a session JWT on success. checkPeerGroupAccess fails closed when a private service has empty AccessGroups.
- ValidateSession/ValidateTunnelPeer responses now carry peer_group_ids + peer_group_names so the proxy can authorise policy-aware middlewares without an extra management round-trip.
- ProxyInboundListener + SendStatusUpdate.inbound_listener: per-account inbound listener state surfaced to dashboards.
- PathTargetOptions.direct_upstream (11): bypass the embedded NetBird client and dial the target via the proxy host's network stack for upstreams reachable without WireGuard.
Data model
- Service.Private (bool) + Service.AccessGroups ([]string, JSON- serialised). Validate() rejects bearer auth on private services. Copy() deep-copies AccessGroups. pgx getServices loads the columns.
- DomainConfig.Private threaded into the proxy auth middleware. Request handler routes private services through forwardWithTunnelPeer and returns 403 on validation failure.
- Account-level SynthesizePrivateServiceZones (synthetic DNS) and injectPrivateServicePolicies (synthetic ACL) gate on len(svc.AccessGroups) > 0.
Proxy
- /netbird proxy --private (embedded mode) flag; Config.Private in proxy/lifecycle.go.
- Per-account inbound listener (proxy/inbound.go) binding HTTP/HTTPS on the embedded NetBird client's WireGuard tunnel netstack.
- proxy/internal/auth/tunnel_cache: ValidateTunnelPeer response cache with single-flight de-duplication and per-account eviction.
- Local peerstore short-circuit: when the inbound IP isn't in the account roster, deny fast without an RPC.
- proxy/server.go reports SupportsPrivateService=true and redacts the full ProxyMapping JSON from info logs (auth_token + header-auth hashed values now only at debug level).
Identity forwarding
- ValidateSessionJWT returns user_id, email, method, groups, group_names. sessionkey.Claims carries Email + Groups + GroupNames so the proxy can stamp identity onto upstream requests without an extra management round-trip on every cookie-bearing request.
- CapturedData carries userEmail / userGroups / userGroupNames; the proxy stamps X-NetBird-User and X-NetBird-Groups on r.Out from the authenticated identity (strips client-supplied values first to prevent spoofing).
- AccessLog.UserGroups: access-log enrichment captures the user's group memberships at write time so the dashboard can render group context without reverse-resolving stale memberships.
OpenAPI/dashboard surface
- ReverseProxyService gains private + access_groups; ReverseProxyCluster gains private + supports_private. ReverseProxyTarget target_type enum gains "cluster". ServiceTargetOptions gains direct_upstream. ProxyAccessLog gains user_groups.
The cluster listing now answers three questions in one round-trip
instead of forcing the dashboard to cross-reference the domains API:
which clusters can this account see, are they currently up, and what
do they support. The ProxyCluster wire type drops the boolean
self_hosted in favour of a `type` enum (`account` / `shared`) plus
explicit `online`, `supports_custom_ports`, `require_subdomain`, and
`supports_crowdsec` fields.
Store query reworked so offline clusters still appear (no last_seen
WHERE), with online and connected_proxies both derived from the
existing 2-min active window via portable CASE expressions; the
1-hour heartbeat reaper still removes long-stale rows. Service
manager enriches each cluster with the capability flags via the
existing per-cluster lookups (CapabilityProvider now also exposes
ClusterSupportsCrowdSec).
GetActiveClusterAddresses* keep their tight 2-min filter so service
routing and domain enumeration aren't pulled into the wider window.
The hard cut removes self_hosted from the response — the dashboard is
the only consumer and is updated in the matching PR; no transitional
field is shipped.
Adds a cross-engine regression test asserting offline clusters
surface, connected_proxies counts only fresh proxies, and
account-scoped BYOP clusters never leak across accounts.
* [management] Ensure SessionStartedAt has a default value
Avoid null values for the new column
* [management] Add PeerStatus with LastSeen in peer_test
* [management] Add migration for PeerStatusSessionStartedAt default value
* [management] Add PeerStatus with LastSeen in migration tests
* [management] Add metrics for peer status updates and ephemeral cleanup
The session-fenced MarkPeerConnected / MarkPeerDisconnected path and
the ephemeral peer cleanup loop both run silently today: when fencing
rejects a stale stream, when a cleanup tick deletes peers, or when a
batch delete fails, we have no operational signal beyond log lines.
Add OpenTelemetry counters and a histogram so the same SLO-style
dashboards that already exist for the network-map controller can cover
peer connect/disconnect and ephemeral cleanup too.
All new attributes are bounded enums: operation in {connect,disconnect}
and outcome in {applied,stale,error,peer_not_found}. No account, peer,
or user ID is ever written as a metric label — total cardinality is
fixed at compile time (8 counter series, 2 histogram series, 4 unlabeled
ephemeral series).
Metric methods are nil-receiver safe so test composition that doesn't
wire telemetry (the bulk of the existing tests) works unchanged. The
ephemeral manager exposes a SetMetrics setter rather than taking the
collector through its constructor, keeping the constructor signature
stable across all test call sites.
* [management] Add OpenTelemetry metrics for ephemeral peer cleanup
Introduce counters for tracking ephemeral peer cleanup, including peers pending deletion, cleanup runs, successful deletions, and failed batches. Metrics are nil-receiver safe to ensure compatibility with test setups without telemetry.
* [management] Fence peer status updates with a session token
The connect/disconnect path used a best-effort LastSeen-after-streamStart
comparison to decide whether a status update should land. Under contention
— a re-sync arriving while the previous stream's disconnect was still in
flight, or two management replicas seeing the same peer at once — the
check was a read-then-decide-then-write window: any UPDATE in between
caused the wrong row to be written. The Go-side time.Now() that fed the
comparison also drifted under lock contention, since it was captured
seconds before the write actually committed.
Replace it with an integer-nanosecond fencing token stored alongside the
status. Every gRPC sync stream uses its open time (UnixNano) as its token.
Connects only land when the incoming token is strictly greater than the
stored one; disconnects only land when the incoming token equals the
stored one (i.e. we're the stream that owns the current session). Both
are single optimistic-locked UPDATEs — no read-then-write, no transaction
wrapper.
LastSeen is now written by the database itself (CURRENT_TIMESTAMP). The
caller never supplies it, so the value always reflects the real moment
of the UPDATE rather than the moment the caller queued the work — which
was already off by minutes under heavy lock contention.
Side effects (geo lookup, peer-login-expiration scheduling, network-map
fan-out) are explicitly documented as running after the fence UPDATE
commits, never inside it. Geo also skips the update when realIP equals
the stored ConnectionIP, dropping a redundant SavePeerLocation call on
same-IP reconnects.
Tests cover the three semantic cases (matched disconnect lands, stale
disconnect dropped, stale connect dropped) plus a 16-goroutine race test
that asserts the highest token always wins.
* [management] Add SessionStartedAt to peer status updates
Stored `SessionStartedAt` for fencing token propagation across goroutines and updated database queries/functions to handle the new field. Removed outdated geolocation handling logic and adjusted tests for concurrency safety.
* Rename `peer_status_required_approval` to `peer_status_requires_approval` in SQL store fields
When closing go routines and handling peer disconnect, we should avoid canceling the flow due to parent gRPC context cancellation.
This change triggers disconnection handling with a context that is not bound to the parent gRPC cancellation.
* Add support for legacy IDP cache environment variable
* Centralize cache store creation to reuse a single Redis connection pool
Each cache consumer (IDP cache, token store, PKCE store, secrets manager,
EDR validator) was independently calling NewStore, creating separate Redis
clients with their own connection pools — up to 1400 potential connections
from a single management server process.
Introduce a shared CacheStore() singleton on BaseServer that creates one
store at boot and injects it into all consumers. Consumer constructors now
receive a store.StoreInterface instead of creating their own.
For Redis mode, all consumers share one connection pool (1000 max conns).
For in-memory mode, all consumers share one GoCache instance.
* Update management-integrations module to latest version
* sync go.sum
* Export `GetAddrFromEnv` to allow reuse across packages
* Update management-integrations module version in go.mod and go.sum
* Update management-integrations module version in go.mod and go.sum
* Add network map benchmark and correctness test files
* Add tests for network map components correctness and edge cases
* Skip benchmarks in CI and enhance network map test coverage with new helper functions
* Remove legacy network map benchmarks and tests; refactor components-based test coverage for clarity and scalability.
- Add GetSelectedClientRoutes() to the route manager that filters through FilterSelectedExitNodes, returning only active routes instead of all management routes
- Use GetSelectedClientRoutes() in the DNS route checker so deselected exit nodes' 0.0.0.0/0 no longer matches upstream DNS IPs — this prevented the resolver from switching
away from the utun-bound socket after exit node deselection
- Initialize iOS DNS server with host DNS fallback addresses (1.1.1.1:53, 1.0.0.1:53) and a permanent root zone handler, matching Android's behavior — without this, unmatched
DNS queries arriving via the 0.0.0.0/0 tunnel route had no handler and were silently dropped
- DNS resolution broke after deselecting an exit node because the route checker used all client routes (including deselected ones) to decide how to forward upstream DNS
queries
- Added GetSelectedClientRoutes() to the route manager that filters out deselected exit nodes, and switched the DNS route checker to use it
- Confirmed fix via device testing: after deselecting exit node, DNS queries now correctly use a regular network socket instead of binding to the utun interface
* Add condition to GPG key decoding to handle pull requests
* Add license field to deb and rpm package configurations
* Add condition to GPG key decoding for external pull requests
* [misc] Add GPG signing key support for deb and rpm packages
* [misc] Improve GPG key management for deb and rpm signing
* [misc] Extract GPG key import logic into a reusable script
* [misc] Add key fingerprint extraction and targeted export for GPG keys
* [misc] Remove passphrase from GPG keys before exporting
* [misc] Simplify GPG key management by removing import script
* [misc] Bump GoReleaser version to v2.14.3 in release workflow
* [misc] Replace GPG passphrase variables with NFPM-prefixed alternatives in workflows and configs
* [misc] Update naming conventions for package IDs and passphrase variables in workflows and configs
* [misc] Standardize NFPM variable naming in release workflow
* [misc] Adjust NFPM variable names for consistency in release workflow
* [misc] Remove Debian signing GPG key usage in workflows and configs
* [client] Fix exit node menu not refreshing on Windows
TrayOpenedCh is not implemented in the systray library on Windows,
so exit nodes were never refreshed after the initial connect. Combined
with the management sync not having populated routes yet when the
Connected status fires, this caused the exit node menu to remain empty
permanently after disconnect/reconnect cycles.
Add a background poller on Windows that refreshes exit nodes while
connected, with fast initial polling to catch routes from management
sync followed by a steady 10s interval. On macOS/Linux, TrayOpenedCh
continues to handle refreshes on each tray open.
Also fix a data race on connectClient assignment in the server's connect()
method and add nil checks in CleanState/DeleteState to prevent panics
when connectClient is nil.
* Remove unused exitNodeIDs
* Remove unused exitNodeState struct
The combined server was using the hostname from exposedAddress for both
singleAccountModeDomain and dnsDomain, causing fresh installs to get
the wrong domain and existing installs to break if the config changed.
Add resolveDomains() to BaseServer that reads domain from the store:
- Fresh install (0 accounts): uses "netbird.selfhosted" default
- Existing install: reads persisted domain from the account in DB
- Store errors: falls back to default safely
The combined server opts in via AutoResolveDomains flag, while the
standalone management server is unaffected.
* **Bug Fixes**
* Fixed domain configuration handling in single account mode to properly retrieve and apply domain settings from account data.
* Improved error handling when account data is unavailable with fallback to configured default domain.
* **Tests**
* Added comprehensive test coverage for single account mode domain configuration scenarios, including edge cases for missing or unavailable account data.
The expose tracker used sync.Map for in-memory TTL tracking of active expose sessions, which broke and lost all sessions on restart.
Replace with SQL-backed operations that reuse the existing meta_last_renewed_at column:
- Add store methods: RenewEphemeralService, GetExpiredEphemeralServices, CountEphemeralServicesByPeer, EphemeralServiceExists
- Move duplicate/limit checks inside a transaction with row-level locking (SELECT ... FOR UPDATE) to prevent concurrent bypass
- Reaper re-checks expiry under row lock to avoid deleting a just-renewed service and prevent duplicate event emission
- Add composite index on (source, source_peer) for efficient queries
- Batch-limit and column-select the reaper query to avoid DB/GC spikes
- Filter out malformed rows with empty source_peer
Consolidate all expose business logic (validation, permission checks, TTL tracking, reaping) into the manager layer, making the gRPC layer a pure transport adapter that only handles proto conversion and authentication.
- Add ExposeServiceRequest/ExposeServiceResponse domain types with validation in the reverseproxy package
- Move expose tracker (TTL tracking, reaping, per-peer limits) from gRPC server into manager/expose_tracker.go
- Internalize tracking in CreateServiceFromPeer, RenewServiceFromPeer, and new StopServiceFromPeer so callers don't manage tracker state
- Untrack ephemeral services in DeleteService/DeleteAllServices to keep tracker in sync when services are deleted via API
- Simplify gRPC expose handlers to parse, auth, convert, delegate
- Remove tracker methods from Manager interface (internal detail)
CLI: new expose command to publish a local port with flags for PIN, password, user groups, custom domain, name prefix and protocol (HTTP default).
Management/API: create/renew/stop expose sessions (streamed status), automatic naming/domain, TTL renewals, background expiration, new management RPCs and client methods.
UI/API: account settings now include peer_expose_enabled and peer_expose_groups; new activity codes for peer expose events.
* [client] Batch macOS DNS domains across multiple scutil keys to avoid truncation
scutil has undocumented limits: 99-element cap on d.add arrays and ~2048
byte value buffer for SupplementalMatchDomains. Users with 60+ domains
hit silent domain loss. This applies the same batching approach used on
Windows (nrptMaxDomainsPerRule=50), splitting domains into indexed
resolver keys (NetBird-Match-0, NetBird-Match-1, etc.) with 50-element
and 1500-byte limits per key.
* check for all keys on getRemovableKeysWithDefaults
* use multi error
Per RFC 4592 section 2.2.1, wildcards should only match when the queried
name does not exist in the zone. Previously, if host.example.com had an
A record and *.example.com had an AAAA record, querying AAAA for
host.example.com would incorrectly return the wildcard AAAA instead of
NODATA.
Now the resolver checks if the domain exists (with any record type)
before falling back to wildcard matching, returning proper NODATA
responses for existing names without the requested record type.
* **New Features**
* Wildcard DNS fallback for eligible query types (excluding NS/SOA): attempts wildcard records when no exact match, rewrites wildcard names back to the original query, and rotates responses; preserves CNAME resolution.
* **Tests**
* Vastly expanded coverage for wildcard behaviors, precedence, multi-record round‑robin, multi-type chains, multi-hop and cross-zone scenarios, and edge cases (NXDOMAIN/NODATA, fallthrough).
* **Chores**
* CI lint config updated to ignore an additional codespell entry.
- Connect on daemon start only if the file existed before
- fixed a bug that happened when the default profile config was removed, which would recreate it and reset the active profile to the default.
in some cases iOS and macOS may be locked when looking for management domains during network changes
This change introduce an additional timeout on top of the context call
Adds a new NotifyOSLifecycle RPC and server handler to centralize OS sleep/wake handling, introduces Server.sleepTriggeredDown for coordination, updates client UI to call the new RPC, and adjusts the internal sleep event enum zero-value semantics.
Two new boolean flags, SearchDomainDisabled and SkipPTRProcess, are added to CustomZone and its protobuf; they are propagated through the engine to DNS host logic. Host matching now uses SearchDomainDisabled directly, and PTR collection skips zones with SkipPTRProcess; reverse zones are initialized with SearchDomainDisabled: true.
Upgrade Go toolchain and golang.org/x/* deps to 1.24.10, standardize GitHub Actions to derive Go version from go.mod and adjust checkout ordering, raise WASM size limit to 55 MB, update FreeBSD tarball and gomobile refs, fix a few format-string/logging calls, treat usernames ending with $ as system accounts, and add Windows tests.
Implements feature-aware firewall rule expansion: derives peer-supported features (native SSH, portRanges) from peer version, prefers explicit Ports over PortRanges when expanding, conditionally appends a native SSH (22022) rule when policy and peer support allow, and adds helpers plus tests for SSH expansion behavior.
* Remove aur support and start service on ostree
The aur installation was adding many packages and installing more than just the client. For now is best to remove it and rely on binary install
Some users complained about ostree installation not starting the client, we add two explicit commands to it
* use ${SUDO}
* fix if closure
This PR adds user approval functionality to the management system, allowing administrators to manually approve new users joining via domain matching. When enabled, users are blocked with pending approval status until explicitly approved by an admin.
Adds UserApprovalRequired setting to control manual user approval requirement
Introduces user approval and rejection endpoints with corresponding business logic
Prevents pending approval users from adding peers or logging in
adds a GitHub Actions workflow to enforce documentation requirements for pull requests, ensuring contributors acknowledge whether their changes need documentation updates or provide a link to a corresponding docs PR.
- Adds a new GitHub Actions workflow that validates documentation acknowledgement in PR descriptions
- Updates the PR template to include mandatory documentation checkboxes and URL field
- Implements validation logic to ensure exactly one documentation option is selected and verifies docs PR URLs when provided
This PR adds a validate flow response feature to the management server by integrating an IntegratedValidator component. The main purpose is to enable validation of PKCE authorization flows through an integrated validator interface.
- Adds a new ValidateFlowResponse method to the IntegratedValidator interface
- Integrates the validator into the management server to validate PKCE authorization flows
- Updates dependency version for management-integrations
This PR introduces a new onboarding feature to handle such flows in the dashboard by defining an AccountOnboarding model, persisting it in the store, exposing CRUD operations in the manager and HTTP handlers, and updating API schemas and tests accordingly.
Add AccountOnboarding struct and embed it in Account
Extend Store and DefaultAccountManager with onboarding methods and SQL migrations
Update HTTP handlers, API types, OpenAPI spec, and add end-to-end tests
when adding a peer we calculate the network map an account using backpressure functions and some updates might arrive around the time we are deleting a policy.
This change ensures we wait enough time for the updates from add peer to be sent and read before continuing with the test logic
Maycon Santos