* Initial scaffolding
* Applies MDM override
* Unit tests
* Helpers business logic
* Return error if trying to modify any config that is gated by MDM
* Add ManagedFields to returned config over GetConfig
* Adds initial 101 MDM policy business logic testing
* gRPC MDM changes
* MDM Name scoping for clarity
* Implements windows loading of MDM policy
* Adds missing WGPort config
* Cleanup setupKey to align to linear
* Align split tunnel code
* Adds some log
* Prefix every log with MDM
* Adds debug config cobra command
This can be useful for troubleshooting and checking config
now that its resolution is not trivial
defaults > config > env cars > CLI/UI > MDM
* Adds MDM 1m diff checker & reloader
* Adds also up/start after cancel
* Publishes event for UI to sync upon MDM changes
* Add events to resync UI to actual config
This also provide fixup for UI no aligning to changed config when coming from cli up with config flags.
* UI behavior conflicts relaxation
UI sends full config snapshot with all values. It doesn't
make sense to block it if the values are aligned with the
values constrained by the MDM policy. It's just simplier
to allow values that are compliant. (this goes for the CLI
as well at this point)
* Lock toggle Settngs
* Advanced Settings locking
* Fixup presharedkey
* Apply MDM locks
* Toggle gray in/out for Advanced Settings
* Adds support for disabling of Profiles and UpdateSettings feature flags
* Adds Gate Login as well when --disable-update-settings=true is given to service
This commit tries to settle things with an old PR-4237 which had relaxed
the case where the SetConfig returned an `Unavailable` code error.
Under this circumnstance the PR allowed the upFunc to just emit a warning and
progress further with the login gRPC. Since the login call is consuming
the --management-url coming from the `up` command, it might be possible
to abuse the "Unavailable" code to inject a management URL that is different
from the configured one even though the --disable-update-settings is set
to true (?)
* Evaluate disable-update-settings errors only when there's an actual override
* [UI] Fixup advanced Settings
* [UI] Fixup for preshared key
* [UI] Fixup for profile enable/disable toggle
We need to align the initial state to evaluate the delta in case.
The initial state has to be "true" since the profile starts visible.
Then we receive MDM and transition the cache bool value to the actual
MDM imposed state
* Enforces disable networks
* [UI] Aligns to "enable/disable once on change only"
* Fixup: MDM wins. always
* Removes --disable-advanced-settings
It was a typo in our meetings. the actual thing is --disable-update-settings
* [PROTO] Removes --disable-advanced-settings
* [UI] Removes --disable-advanced-settings
* Pins feat profile retrieval to notif event
* [UI] Fix for "hide" not working when propagating to parent with children
* Adds dep for reading plist files
* Introduces support for darwing plist loading
* Tests MDM config reload via ticker
* [PROVISIONING] ADMX/ADML/PS/bash scripts/templates
* CI fixes
- Add docstrings to `mdm_integration`
- refactor for cognitive complexity
- mod tidy
* Linting
* Add docstrings to `mdm_integration`
* nil,nil is no policy and no error. Allow it
* nil,nil is no policy and no error. Allow it
* exclude MDM profile adminstrated keys data from debug bundle
* Fixes Rosenpass left disable after MDM unlock
* Partial revert coderabbit added docstrings
* Renaming fix
* Avoid locking on clientRunning bool when the connection is aborted for whatever reason
We want to just signal this through the giveUpChan, we will manage the signal from
the waiter side and in case set it to false there. THis way we avoid locking,
which should allow the MDM down+wait_for_term_chan_signal_+up procedure
clientRunning is used to signal two different conditions here:
1. the initialization procedure is over (we have an engine)
2. the connection being up (or being attempted)
Probably these two functionalities should not alias, and the failure of the second condition
(because of any error) should just drive a reconnection (currently it's not happening,
and we silently go idle).
OR, mor probably, the two things are the SAME and there should not exist a case where
we did the "Up" initialization and connection attempt but we are not still attempting it.
* Moves test helper at te very bottom
* Addresses github comments
* No lock no copy
* Prevents engine not stopping within 10 secs from being paired by another instance
We instead juts SKIP updating the policy, so
1. the MDM ticker will kick in 1 minute time,
2. find the policy misaligned,
3. enter the onMDMPolicyChange,
4. find the s.clientRunning == true
(because it is set to false only in server cleanupConnection,
and not by s.actCancel())
5. call s.actCancel() again if not nil
6. immediately return from <-s.clientGiveUpChan
7. finally call s.restartEngineForMDMLocked()
* Since we ARE running there should be a config
If the config was cancelled midflight, connect will abort later on
* DisableAutoConnect should not stop a running connection.
DisableAutoConnect should just avoid the connection attempts *when the service starts*.
If we are started and we are up and running, DisableAutoConnect should not kick in.
Another PR will follow about this topic
* Removes unused vars
* Moves callback into Run method arg
* align comment to removal of DisableAutoConnect
DisableAutoConnect should just avoid the connection attempts *when the service starts*.
If we are started and we are up and running, DisableAutoConnect should not kick in
* Removes unused managed_fields data.
This was initially used to drive the UI but approach changed
to reload config/features upon notifications which makes this data redundant.
* Reorder stuff
* Unexport unrequired vars/functions
PoliciesEqual → policiesEqual
AllKeys → allKeys
* Adds list of MDM managed fields in the debug bundle
* [client] Index peer tunnel IPs for O(1) PeerStateByIP lookup
Replace the linear scan over all peers with an ipToKey map maintained
by AddPeer/RemovePeer, covering both IPv4 and IPv6 tunnel addresses.
Offline peers are intentionally no longer resolvable by IP: only active
peers can carry traffic, so IdentityForIP and the DNS disconnected-peer
filter now treat them as unknown, same as foreign IPs.
Skip the DNS answer filter for single-record responses; dropping the
only answer was always restored by the empty-answer escape hatch, so
the fast path is behavior-neutral.
* Ensure `ipToKey` entries are only removed if they match the peer being deleted, preventing accidental removal of unrelated mappings.
- Engine.Start takes syncMsgMux with a deferred unlock (engine.go:445) and parks in receiveSignalEvents → WaitStreamConnected (engine.go:1762), which only wakes on
signal-stream connect or client-context cancellation.
- When signal never connects, the 30s startup timeout fires and embed.Client.Start's rollback (embed.go:281) called client.Stop() → Engine.Stop, which blocks acquiring
syncMsgMux (engine.go:318). The cancel() that would unpark Start was deferred until Start returned — permanent cycle. RemovePeer calls (g43/g385) then queue behind the
lifecycle mutex.
- Notably, embed.Client.Stop and the daemon's cleanupConnection both cancel before stopping — the startup rollback was the only path that didn't.
- Engine.Start takes syncMsgMux with a deferred unlock (engine.go:445) and parks in receiveSignalEvents → WaitStreamConnected (engine.go:1762), which only wakes on
signal-stream connect or client-context cancellation.
- When signal never connects, the 30s startup timeout fires and embed.Client.Start's rollback (embed.go:281) called client.Stop() → Engine.Stop, which blocks acquiring
syncMsgMux (engine.go:318). The cancel() that would unpark Start was deferred until Start returned — permanent cycle. RemovePeer calls (g43/g385) then queue behind the
lifecycle mutex.
- Notably, embed.Client.Stop and the daemon's cleanupConnection both cancel before stopping — the startup rollback was the only path that didn't.
* [management] Add version gate to stop sending deprecated RemotePeers field
don't send top-level remote peers on peers in the v0.29.3 or newer
* precompute deprecated remote peers version constraint
* [management] update tests to validate network map-based remote peers
* [management] move deprecatedRemotePeersVersion constant closer to its usage
* fix misplaced precomputed constraint definition
* ensure top-level RemotePeers is empty for v0.29.3+ clients
* [client] Preserve posture checks on config-only sync updates
When management sends a MessageTypeControlConfig update (e.g. relay token
rotation), the SyncResponse carries no NetworkMap and no Checks. Moving the
updateChecksIfNew call after the nm == nil guard ensures posture checks are
only updated when a full network map is present, preventing relay token
rotation from silently clearing the previously applied posture check state.
* [client] Clarify posture check update logic with explicit comment
* [client] Extract NetBird config and sync persistence into helpers
Move the NetbirdConfig handling block out of handleSync into
updateNetbirdConfig and the sync response persistence into
persistSyncResponse, mirroring updateChecksIfNew. This flattens
handleSync and makes the individual update steps unit-testable.
* Made the docker check first for getting-started.sh, better atomic support for install.sh
* Check for docker socket perms
* Added fallback for systems without rpm-ostree or bootc.
* macOS fix for docker socket check
* Change error message for docker group.
No longer using a blanket recommendation for the docker group.
private services on a custom domain didn't resolve on clients — the synthesized DNS zone was anchored to the cluster, and the account's custom domains weren't even
loaded.
- account.go — SynthesizePrivateServiceZones now keys zones by a resolved apex (privateServiceDomainZone): cluster suffix → registered account.Domains (filtered by matching
TargetCluster, longest wins) → skip if none. One zone per apex; custom-domain services group under their registered domain.
- sql_store.go — GetAccount now loads account.Domains on both loaders (gorm Preload("Domains") + pgx goroutine via ListCustomDomains; errChan buffer bumped 12→16). This was
the reason the deploy didn't work — the relation was empty in prod.
- Tests — custom-domain zone synthesis cases (apex resolution, free+custom separation, sibling collapse, cluster mismatch, mixed cluster/custom/public) + GetAccount
domain-preload tests on sqlite and Postgres.
* [management] Copy private field on shallowCloneMapping
added test to ensure clone handles new fields
* Remove unnecessary debug logs from proxy service
* Increase Wasm binary size limit to 60MB in build validation
* Adds heuristic to detect an edge case on Linux where a system has configured logrotate as a separate service to rotate log files which would mangle our client log files. If we detect logrotate being configured for netbird, we disable our rotation.
* Adds new env var to disable log rotation: NB_LOG_DISABLE_ROTATION
* Adds compressed and plain logrotate files to debug bundle.
* Replaces lumberjack with timberjack (maintained fork with bug fixes and extra features).
* Clarifies which daemon version is running in the bundle stats.
* Change logging for client service status to console
* [infrastructure] allow docker image overrides for getting started
Make dashboard and server image configurations overrideable via environment variables
* [infrastructure] update Traefik gRPC rule to include ProxyService PathPrefix
* make Traefik and CrowdSec images configurable via environment variables
pascal