Six behaviours had unit coverage only, either because they arrived from code
review after the end-to-end tests were written or because no request in the
suite had the shape that reaches them.
Streaming is the important one. Input tokens exist only in a stream's opening
message_start event, and reading a stream with the wrong vendor's parser
misses it — the metering bug this endpoint's protocol work fixed. Nothing in
the suite sent stream: true, so the branch never ran. The mock now serves an
SSE surface on a second listener, reporting counts that differ from its
buffered ones so a passing assertion can only mean the stream accumulator ran,
and one case drives it through a record typed for the wrong surface.
The rest need no new harness capability: the per-model lookup against the
allowlist, the read-method gate on the non-inference paths, dated ids reaching
an undated registration while a pinned build refuses a different one, the
Bedrock inference-profile lookup reaching its upstream rather than a policy
denial, and a custom dated id keeping its own price.
Sub-agent ids stay uncovered: the parser lifts them onto request metadata but
nothing persists them, so there is no queryable surface to assert against
until that half lands. Covered here only to the extent that sending the
headers leaves the request served and metered.
TestPriceChangeUpdatesRecordedCost drives requests in a loop until one is
priced at the new rate, because the price push and the proxy's chain rebuild
are async. The loop could not actually retry: it looked the row up through
findAccessLogBySession, which fails the test outright when no row lands
within 30s, so the first post-update request that produced no row ended the
run instead of yielding to the next attempt.
That is the observed failure — the nightly run has been red on this test
roughly half the time, always with "session id ...-reprice-b-... must be
recorded in an access-log row" after ~41s: container setup, one request, one
30s wait, dead.
A missing row there is expected rather than exceptional. The provider update
rebuilds the middleware chain, and a request served mid-rebuild can complete
without a resolved provider: 200 to the caller, nothing to attribute, so no
row is ever written for it. Split the polling helper into a non-fatal lookup
and keep the fail-fast wrapper for callers whose row must exist, then treat a
miss in the loop like any other not-yet-repriced iteration. Only the outer
deadline is fatal.
Shorten the per-attempt wait to 20s and raise the overall deadline to 180s so
several attempts fit where before the budget allowed barely one.
* [client] Pass stored email as login hint from UI and keep it on logout
Follow the CLI pattern: the Wails UI now reads the account email from the
user-owned profile state file and passes it as the OIDC login_hint on login
and session extend, since the daemon-side fallback runs as root and cannot
see the user's state file. Logout no longer deletes the stored email, so a
later login preselects the account at the IdP; profile removal remains the
operation that deletes it.
* [client] Log ignored profile lookup errors in extend-session hint fallback
* [client] Skip IPv6 route tests when the default nexthop is unusable
ensureIPv6DefaultRoute treated a successful netlink RouteAdd as proof that
a usable IPv6 nexthop exists. Installing ::/0 via loopback can succeed while
the kernel still rejects that nexthop for a concrete prefix, which surfaced
on ubuntu22/20260810.260 runners as:
add route to table: netlink add route: invalid argument
Probe the resolved nexthop by installing and removing a discard-prefix route
through the same code path the tests use, and skip when it fails. EEXIST
means the nexthop already carries a route, so it counts as usable.
* [client] Probe the IPv6 nexthop through raw netlink
addRoute swallows EAFNOSUPPORT and EOPNOTSUPP via isOpErr, so a nil return
did not prove the probe route was installed. Call netlink directly so an
unsupported operation skips the test instead of passing as usable.
Align Android logout semantics with the desktop UI and CLI: logging out no
longer deletes the stored account email, so the next login passes it as the
OIDC login_hint and the IdP preselects the account. Removing the profile is
now the operation that deletes the email; previously RemoveProfile left the
account file behind, which the fixed-name default profile would have
inherited on recreation.
English (en) is the source of truth for UI translation keys; the other
nine locales rely on runtime English fallback for any missing key, so a
gap never surfaces in CI. Add a dependency-free Node check that fails
when any locale declared in _index.json does not carry the exact same
key set as en (missing or orphaned keys), wired into a dedicated
UI Translations workflow that runs on locale changes.
Also close the one existing gap the check found: ja was missing
daemon.outdated.download ("Download Latest").
Co-authored-by: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Prepares the repository for the release-branch process agreed internally:
one long-lived release-0.N branch per minor, with fixes backported by
cherry-pick and patch releases tagged from the branch.
Pushes to release-* branches now run the Release workflow and publish
immutable sha-* container images, the way pushes to main already do, so
a release branch can be tested before it is tagged. Release branches
never publish the floating "main" image tag. The push-to-main CI
workflows (Go tests on all platforms, frontend UI, install script,
mobile/wasm validation, infrastructure files, license check) also run
on release-* pushes; pull request triggers were already unfiltered, so
backport PRs were covered — this closes the post-merge gap.
Releases are no longer marked latest before signing: make_latest is
now false in all four goreleaser configs, so a release stays published
but not latest until the signing pipeline uploads the signed Windows
and macOS artifacts and marks it latest itself. Previously the release
became GitHub's "Latest release" at publish time, and the download
endpoints that resolve through the latest-release API could serve a
release whose signed installers did not exist yet. prerelease: auto
additionally labels rc tags as prereleases, so a release candidate can
never take the latest slot.
The trigger_sync_tag job is removed: it dispatched a downstream
image build on every v* tag (release candidates included), which would
race the deliberate release-branch build on every release. The android
and ios submodule bumps are unchanged.
Also sets perennial-regex = "^release-" so git-town never syncs or
ships a release branch into main.
The NSIS installer deleted HKLM/HKCU CurrentVersion\Run values it never
writes, which matches common AV heuristics for unwanted Run-key
manipulation and is suspected to contribute to Windows Defender and
third-party antivirus false positives on the installer.
Drop all autostart registry deletions from both the install and
uninstall sections so the installer only touches keys it creates
itself. Cleanup of the legacy machine-wide entry written by old
installers is left to documentation.
Extends the approach of the closed PR #6735, which only removed the
per-user deletion on uninstall.
e2e/harness documents itself as feature-agnostic, but three details
assumed the caller lives in this repo, so the terraform provider's
acceptance suite would otherwise carry a second harness for the same
product.
repoRoot took the first module root above the working directory as the
Docker build context, which from another module is the caller's own
root, with no combined/Dockerfile.multistage in it. It now requires that
ancestor to be this module, and otherwise asks the go tool for the
source: for a dependent, the extracted directory of the version it pins,
so the server matches the client library it was compiled against. That
lookup uses -mod=readonly, since automatic vendor mode otherwise reports
an empty Dir.
Geolocation was disabled unconditionally. Agent-network ingest does not
use it, but location-based posture checks need the database, and a rule
management cannot evaluate fails rather than passing.
StartClient pinned one network alias and set no hostname, so a second
agent could not start and a peer's name was arbitrary. Management
records that hostname, making it the peer's name in the API.
The client entrypoint is copied with an explicit mode: git tracks it
100755, but the module cache extracts 0444, so a dependent's build
produced a container exiting with "permission denied".
Adds CombinedOption, WithGeolocation, WithServerEnv, ClientOption and
WithClientName.
- Align default names and reuse same environment variables
- With the uploads now targeting the same stable/yum paths as the GTK4
packages, two packages named netbird-ui with the same version and arch
would collide in the repo indexes. Give the GTK3 variant its own
package name and mark the two as conflicting alternatives.
---------
Co-authored-by: Zoltan Papp <zoltan.pmail@gmail.com>
Two changes to routeClaimsModel, both about dated Anthropic ids.
Normalising the configured candidate as well as the requested model made
every dated build of a family interchangeable: a route registered against
claude-sonnet-4-5-20250101 also claimed ...-20250202, so an operator who
pinned a build deliberately would have served a different one, and with
several such routes declaration or path order decided which. Only an undated
registration now absorbs a dated request.
The per-model lookup also stamps the model its path names, so the guardrail's
allowlist — a separate and possibly narrower list than the route's — still
decides GET /v1/models/{id} rather than seeing no model at all.
The guardrail enforces its own per-provider model allowlist and fails closed
when the request names no model, which is right for a path-routed inference
request whose shape the parser could not read. GET /v1/models names no model
anywhere, so discovery still denied with model_unknown for exactly the
accounts that configured an allowlist — the case skipping the management
pre-flight was meant to fix. Only one of the two gates had been opened, and
a client reads the 403 as an empty model picker.
Exempt requests the router marked non-inference from the unknown-model
branch. A named model is still checked, so the exemption covers only the
endpoints that genuinely name nothing: the listing and the warm probe.
The discovery filter read one byte past its 1 MiB cap to detect a body too
large to rewrite, then closed the upstream body and forwarded the buffer it
had — the response reached the client truncated at exactly the cap, with
Content-Length rewritten to match so nothing looked wrong until the client
tried to parse it.
Splice the bytes already read back in front of the unread remainder and
forward the response as the upstream sent it, headers untouched.
People who only ever reach private services through the reverse proxy were
invisible to activity accounting. Active users are counted from user.LastLogin
or from the LastSeen of a peer they own, and neither column was written on the
proxy paths — so a person signing in via SSO to a proxied service, or a peer
serving one over the mesh, never showed up in the 24 hour numbers.
Both writes now happen where the proxy already authenticates:
- GenerateSessionToken stamps LastLogin after the session token is signed,
the same column and the same way the dashboard and device login paths do.
- ValidateTunnelPeer stamps the calling peer's LastSeen, the column its owner
activates through.
The policy lives in a new reverseproxy/activity manager rather than in the gRPC
service, matching the module layout the other reverse proxy domains use. It
skips what can never count — service users, embedded proxy peers and WASM
clients — and throttles peer writes to once an hour, well inside the window
accounting asks about and far above the proxy's five minute tunnel cache.
The peer write is a single indexed UPDATE that touches only
peer_status_last_seen. Connected and SessionStartedAt are left alone so the
session-ownership fencing MarkPeerConnectedIfNewerSession relies on is never
disturbed, and the timestamp comes from the database clock rather than the
caller, for the same reason the other status writers take it from there. The
caller's cutoff travels into the statement's WHERE, so concurrent requests for
one peer collapse into a single write instead of each acting on its own stale
read, and a peer that was never seen — NULL last seen, since Status is an
embedded pointer — still records its first activity.
Nothing outside the reverse proxy changes behaviour: the only addition
elsewhere is the RefreshPeerLastSeen store method the manager calls.
The router classified a non-inference request by path alone, so a POST to
/v1/models/{id} — or to the listing, or the warm probe — was marked
llm.non_inference and skipped the limit check's management pre-flight, even
though such a request can carry an inference body.
Require GET or HEAD, the methods these endpoints actually use. Anything else
falls through to normal per-model routing, which routes on the body's model
under the usual pre-flight, or denies as missing-model when there is none.
Invoke had grown a branch per API surface, each repeating the same
found/unauthorised/unknown switch. Lift the shared denial arms into decide(),
move the model-less endpoints into their own method, and name the two allow
decorations (non-inference marking, Bedrock namespace stripping) so each
surface reads as the one thing it does differently.
No behaviour change.
GET /v1/models/{id} was folded into the model-less endpoints so it would
route rather than deny. Once model-less requests started skipping the
management pre-flight, that also skipped the per-model allowlist: a caller
could confirm the existence and reachability of a model the route does not
list, even though the listing beside it is bounded to that same allowlist.
Resolve the id from the path and route it through the model table like any
other per-model request, keeping model-less treatment for the listing and
the connection-warming probe only. It stays marked non-inference, since the
lookup spends no tokens. A gateway route that enumerates no models still
answers every lookup, as before.
Also record why the Bedrock inference-profile lookup is forwarded rather
than denied: those live on the AWS control plane, and forwarding reproduces
what an unproxied client with the same base URL would see.
The release-date normalizer matched a bare "-YYYYMMDD" suffix on any id.
Pricing looks every model up through it regardless of surface, and an
operator can register a custom model under any id at all, so a custom
"internal-llm-20250101" would silently inherit the rate registered for
"internal-llm".
Anchor the pattern on "claude" so it still covers the vendor-prefixed
Bedrock forms while leaving every other vendor's id untouched.
The routing and parser-selection fixes touch every provider surface, and
the unit tests only prove each side of a seam in isolation. Two suites
close that:
The provider matrix drives one request per wire shape over a single tunnel,
with a record per catalog surface behind it, and asserts the surface each
request was metered under together with the token counts that surface's own
usage block carries. A response read by the wrong provider's parser meters
zero, so a regression fails instead of passing on a coincidental non-zero.
It also covers the Bedrock and Vertex token-counting paths, the warm-up
probe, and the vendor error envelope on a refusal.
The discovery suite covers the configuration that broke: an account with a
model allowlist, where the listing carries no model and the gate failed
closed. It asserts the listing is served, that it is bounded to the
authorised model, and that inference outside the allowlist is still
refused, so the exemption cannot be read as a way around the gate.
The mock upstream grows the Anthropic, Bedrock and token-counting shapes so
one container stands in for every surface, and the client gains GET and
arbitrary-POST helpers for the endpoints that carry no chat body.
The filter treated a slash in a listing entry's id as a gateway provider
prefix and matched only the tail. Self-hosted backends serve ids that carry
a slash of their own, so every "Qwen/Qwen2.5-0.5B-Instruct" style model was
dropped from the picker even when the policy named it exactly.
Try the id as written first and fall back to the tail, so both a prefixed
id and a self-hosted one resolve.
A few client-side checks call their vendor directly instead of following
the configured base URL, so they fail on exactly the locked-down networks
Agent Network is built for while inference keeps working. Fast mode reports
a connectivity error, or reports itself disabled by the organization when
the agent holds only a proxy-issued token, and model discovery stays off
until it is turned on explicitly.
Name the variables that settle each case, and say plainly which ones
allowing direct egress does not fix.
A coding agent that spawns helpers stamps the spawned agent's id on every
request it makes, and the spawning agent's id when that helper is nested.
The parser read the session header and ignored both, so parallel agents
inside one session all attributed to the session alone and there was no way
to see which one spent the tokens.
Emit them as metadata alongside the session id. They are opaque grouping
identifiers rather than content, so they are stamped regardless of the
prompt-collection toggle. Persisting them as queryable access-log columns
is a schema change and is deliberately not part of this commit.
Discovery proxies the upstream's full list, so the picker offers every
model the shared provider key can reach and each one outside the policy is
a request the chain denies a moment later. Restricting models is the point
of the product, and the client had no way to see the restriction.
Carry the resolved route's model list on the upstream rewrite and drop the
rest from the listing response. Only a route that enumerates its models
bounds anything: a catch-all claims every model, so its list passes
through. Anything the filter cannot safely rewrite, including a compressed
or oversized body, reaches the client untouched.
Clients send HEAD /api/hello before their first inference request to open
the upstream connection early. The path carries no model, so it denied as
not-routable and each session start left a policy rejection in the access
log for a request that was never a policy question.
Treat it as a model-less endpoint. Forwarding it warms the connection the
first real request will use, which is what the probe is for.
A client resolving a configured inference profile calls
GET /inference-profiles at startup. The path carries no model and was not
recognised as non-inference, so it denied as not-routable and wrote a
policy rejection into the access log on every session start, which is the
log operators read to find real policy problems.
Recognise the path and match it against a Bedrock provider specifically:
sending it to whichever provider happened to be authorised first would
rewrite it to an upstream that 404s it. The optional gateway namespace is
stripped the same way the runtime paths strip it.
Vertex hangs token counting off the model as its own path segment, and the
parser split the tail on the final colon alone. A count-tokens request
therefore reported its model as "claude-sonnet-5/count-tokens", which no
route claims, so the request denied as not-routable and the access log
recorded a model that does not exist.
Stop at the first "/" after the model id so the method segment stays out of
it, leaving the client free to price its context against the dedicated
endpoint instead of the billable inference one.
Both the request parser and the router enumerated Bedrock actions without
count-tokens, so the path carried no model and the request denied as
not-routable. Nothing breaks outright, because the client falls back to
counting context through the inference endpoint, but that fallback is
billable and the dedicated endpoint exists to avoid exactly that.
The action carries a model in the path and returns no usage, so it routes
like any other Bedrock action and meters to zero.
A budget stop, a blocked model or an unroutable model all rendered as the
NetBird deny envelope alone. LLM clients only parse their own provider's
error shape, so the reason never reached the user: Claude Code showed an
unexplained API error where it could have shown the policy message.
Carry the resolved surface on the deny reason and add the vendor's error
object next to the existing fields. The body stays a superset of what it
was, so anything reading code, message, details or middleware is
unaffected. Status codes are unchanged here: mapping window caps to 429
needs the window reset plumbed through the limits response before a
correct Retry-After can be sent.
Gateway records enable body-level identity so LiteLLM's tag-budget check
can read it, and the injector wrote "user" and "metadata.tags" into every
JSON object regardless of dialect. Claude Code reaches those same records
on /v1/messages, where "user" is not a permitted top-level field and
metadata accepts only "user_id", so the upstream rejected the request with
a 400 naming a field the client never sent. Rewriting the body also
changed the bytes a gateway-side prompt cache keys on.
Gate the body write on the surface llm_request_parser resolved from the
path. Header stamping is untouched, so spend tracking and per-end-user
budgets keep working on the surfaces that lose the body path.
shared/llm normalizes Bedrock and Vertex model ids so both sides of the
routing and pricing contract compare equal, but nothing did the same for a
first-party Anthropic id. A client pinning "claude-sonnet-4-5-20250929"
against a record registered as "claude-sonnet-4-5" denied as not-routable,
and where a catch-all route carried it through, the price lookup missed and
the request recorded no cost.
Add NormalizeAnthropicModel beside the existing two and consult it after an
exact match fails in the router's claim check, the pricing table, and the
per-record price map. Exact matches still win, so an operator who registers
two dated releases of the same family keeps them distinct.
GET /v1/models carries no model, and management's per-model allowlist
fails closed on an undetermined one, so gateway model discovery denied
with model_blocked for every account that enables a model allowlist. The
client treats a failed discovery as silent and falls back to its built-in
list, so the operator sees an empty picker with no error to chase.
The router already classifies these paths and authorises the route against
the caller's groups before allowing them, so mark them non-inference there
and let the limits gate skip a pre-flight that has no model to evaluate
and no tokens to book. The marker comes from the router's own path
classification, never from client input, so an inference request cannot
set it to escape the allowlist.
Gateway catalog entries pin provider_id "openai", and the same record
serves Claude Code on /v1/messages. The parser preferred the pinned id
over the path, so an Anthropic body was read with the OpenAI parser: on a
streaming response the input tokens ride message_start nested under
message, which that parser never reads, so input counted as zero. Both
cache buckets were dropped, and pricing resolved against the openai
surface where no claude-* model exists, skipping cost entirely.
Detect from the path first and keep provider_id as the fallback for
upstreams whose path carries no surface. The Kimi entry already leaves
ParserID empty to work around this; the fallback ordering makes that
unnecessary.
Claude Code resolves to Opus 5 and Sonnet 5 by default, and neither was
selectable on a provider record. An operator building a record from the
catalog could not authorise the client's own default, so llm_router denied
those requests as model_not_routable. Opus 5 carried a supplemental pricing
row that priced gateway traffic but never reached the dashboard; Sonnet 5
was absent everywhere, so a request that did route through a catch-all
gateway recorded zero cost and under-counted every budget it should have
charged.
Add both to the Anthropic, Bedrock and Vertex lineups at the published
rates, and drop the supplemental rows now that the catalog carries them.
At proxy connect time, the declared cluster address is validated for
shape and checked for availability (`IsClusterAddressAvailable`), and
from then on the declaration is what routes the cluster's mappings to
the connection. Deployments that embed management through the
integrations seam may need a policy on that claim — deciding which
credential is allowed to declare which address.
This adds an optional `ProxyConnectAuthorizer` hook on
`ProxyServiceServer`, following the pattern of the existing `Set*` seams
(`SetServiceManager`, `SetAgentNetworkSynthesizer`,
`SetAgentNetworkLimitsService`, `SetProxyController`):
- A nil-able interface field plus `SetProxyConnectAuthorizer`, guarded
by the existing mutex.
- One call at the end of `validateProxyConnect`, so both
`GetMappingUpdate` and `SyncMappings` are covered by a single site.
- **Nothing installs it by default** — with the hook unset (always, in
this repo), behavior is byte-for-byte unchanged, which the tests pin.
Design details:
- The authorizer runs **last** — after input validation and the
availability check — and **outside** the account-scoped branch, so
management-wide tokens and token-less connects are also presented to it
rather than bypassing policy.
- The authorizer receives the presented `*types.ProxyAccessToken` (nil
when none), the proxy ID, and the declared address. Everything it needs
is already in the request/context; no proto or schema change.
- A plain error from the authorizer surfaces as `PermissionDenied`,
keeping an authorization rejection distinguishable from the
`AlreadyExists` used for address conflicts in proxy logs. A status error
passes through unchanged so implementations can pick their own code.
Store the per-account gateway endpoint as {domain, proxy_address} with a
global unique index on the full hostname; dedicated = (domain ==
proxy_address). Bootstrap becomes an explicit POST carrying exactly one
of proxy_address (server allocates an adjective-noun label beneath it)
or endpoint (claimed verbatim, address-first); provider create loses its
bootstrap side effect. PUT is a full replace with every field required —
the immutable identity fields must be echoed unchanged and a mismatch is
rejected with 422. A guarded DELETE releases the endpoint: refused with
412 while providers exist or a proxy is actively serving the endpoint
hostname (matched case-insensitively); re-creating bootstraps fresh. A
self-addressed pin excludes its address from the account's cluster allow
list, and the live mapping update path now addresses the serving proxy
from the synthesized service. Existing rows are migrated on all three
store engines.
