Files
netbird/client/internal/connect.go
T
Zoltán Papp 5df35e3e27 fix(client): track which connection run is current in the daemon
Nothing recorded which run of the connection was current, so three defects
followed from the same gap.

A ConnectClient is single-use, and the daemon builds a fresh one per outer-retry
turn (server.go connect). Each turn overwrote s.connectClient and nothing
stopped the one it replaced — the outgoing run loop had returned, which is what
brought control back to the retry, but that was assumed rather than enforced,
and any teardown its error path left half-done got no second chance.

cleanupConnection read s.connectClient, cancelled, then stopped that engine.
Nothing established the client it read was still current by the time it stopped
it, so a teardown could target a client a newer turn had already replaced and
leave the live one running untracked. Down's wait on clientGiveUpChan and Up's
refusal to start a second loop kept the window narrow, but by arrangement rather
than by construction.

Third, the engine was stopped twice concurrently: actCancel woke the run loop,
which stops the engine on its way out, while cleanupConnection stopped the same
engine directly. The TODO there said ConnectClient.Stop was the right call and
that its unbounded wait was what ruled it out.

RunSupervisor records the generation of the current run. Publish refuses a
client from a superseded run and stops the client it displaces, so no
ConnectClient is dropped without being stopped. Stop invalidates whatever run is
in flight, stops the published client and waits for the run to exit.

ConnectClient.StopWithContext bounds that wait, which removes the TODO's
obstacle: cleanupConnection now hands the run loop sole ownership of engine
shutdown and passes Down's 5s budget down. Stop() keeps its signature and its
unbounded wait, so callers outside this change are untouched. embed.Client.Stop
had built the same bound by hand with a goroutine and a select purely to watch
its caller's context; it passes the context down instead.

clientGiveUpChan and connectClient are gone — the supervisor answers both.
The MDM restart path drops its hand-rolled 10s channel wait for the same Stop,
which additionally stops the client the previous run left behind. Its deliberate
choice to leave clientRunning set is unchanged.

Down now waits inside cleanupConnection, under s.mutex, where it previously
waited after releasing it. That is what pins the client being stopped to the one
current when the call started; the cost is that Down can hold the mutex for up
to its 5s budget.

Found while fixing the iOS wifi-to-cellular black-hole (#7329), which was the
same class of defect in the mobile SDKs. No bug report backs the daemon findings
— they are read off the code, and the narrow windows above may be why they have
not been observed.
2026-08-26 15:28:40 +02:00

818 lines
26 KiB
Go

package internal
import (
"context"
"errors"
"fmt"
"net"
"net/netip"
"path/filepath"
"runtime"
"runtime/debug"
"strings"
"sync"
"sync/atomic"
"time"
"github.com/cenkalti/backoff/v4"
log "github.com/sirupsen/logrus"
"golang.zx2c4.com/wireguard/wgctrl/wgtypes"
"google.golang.org/grpc/codes"
gstatus "google.golang.org/grpc/status"
"github.com/netbirdio/netbird/client/iface/wgaddr"
"github.com/netbirdio/netbird/client/iface"
"github.com/netbirdio/netbird/client/iface/device"
"github.com/netbirdio/netbird/client/iface/netstack"
"github.com/netbirdio/netbird/client/internal/dns"
"github.com/netbirdio/netbird/client/internal/lazyconn"
"github.com/netbirdio/netbird/client/internal/listener"
"github.com/netbirdio/netbird/client/internal/metrics"
"github.com/netbirdio/netbird/client/internal/peer"
"github.com/netbirdio/netbird/client/internal/profilemanager"
"github.com/netbirdio/netbird/client/internal/statemanager"
"github.com/netbirdio/netbird/client/internal/stdnet"
"github.com/netbirdio/netbird/client/internal/tunnelnotifier"
"github.com/netbirdio/netbird/client/internal/updater"
"github.com/netbirdio/netbird/client/internal/updater/installer"
nbnet "github.com/netbirdio/netbird/client/net"
"github.com/netbirdio/netbird/client/netevents"
cProto "github.com/netbirdio/netbird/client/proto"
"github.com/netbirdio/netbird/client/ssh"
sshconfig "github.com/netbirdio/netbird/client/ssh/config"
"github.com/netbirdio/netbird/client/system"
mgm "github.com/netbirdio/netbird/shared/management/client"
mgmProto "github.com/netbirdio/netbird/shared/management/proto"
"github.com/netbirdio/netbird/shared/relay/auth/hmac"
relayClient "github.com/netbirdio/netbird/shared/relay/client"
signal "github.com/netbirdio/netbird/shared/signal/client"
"github.com/netbirdio/netbird/util"
"github.com/netbirdio/netbird/version"
)
// androidRunOverride is set on Android to inject mobile dependencies
// when using embed.Client (which calls Run() with empty MobileDependency).
var androidRunOverride func(c *ConnectClient, runningChan chan struct{}, logPath string) error
type ConnectClient struct {
ctx context.Context
runCancel context.CancelFunc
runExited chan struct{}
runOnce sync.Once
runStarted atomic.Bool
config *profilemanager.Config
statusRecorder *peer.Status
engine *Engine
engineMutex sync.Mutex
clientMetrics *metrics.ClientMetrics
updateManager *updater.Manager
persistSyncResponse bool
// netMgr gates every reconnection loop on OS-reported network
// availability and sweeps connections on network change.
netMgr *netevents.Manager
}
// ConnectClientOption configures optional ConnectClient behavior.
type ConnectClientOption func(*ConnectClient)
// WithNetEvents injects the OS network event handling.
func WithNetEvents(events *netevents.Manager) ConnectClientOption {
return func(c *ConnectClient) { c.netMgr = events }
}
func NewConnectClient(
ctx context.Context,
config *profilemanager.Config,
statusRecorder *peer.Status,
opts ...ConnectClientOption,
) *ConnectClient {
// Derive the run context here so Stop owns the cancel that unblocks the run
// loop. runCancel is set once at construction, so Stop can call it without
// racing the run loop's startup. Callers therefore need not cancel before Stop.
runCtx, runCancel := context.WithCancel(ctx)
c := &ConnectClient{
ctx: runCtx,
runCancel: runCancel,
runExited: make(chan struct{}),
config: config,
statusRecorder: statusRecorder,
engineMutex: sync.Mutex{},
}
for _, opt := range opts {
opt(c)
}
return c
}
func (c *ConnectClient) SetUpdateManager(um *updater.Manager) {
c.updateManager = um
}
// Run with main logic.
func (c *ConnectClient) Run(runningChan chan struct{}, logPath string) error {
if androidRunOverride != nil {
return androidRunOverride(c, runningChan, logPath)
}
return c.run(MobileDependency{}, runningChan, logPath)
}
// RunOnAndroid with main logic on mobile system
func (c *ConnectClient) RunOnAndroid(
tunAdapter device.TunAdapter,
iFaceDiscover stdnet.ExternalIFaceDiscover,
networkChangeListener listener.NetworkChangeListener,
dnsAddresses []netip.AddrPort,
dnsReadyListener dns.ReadyListener,
stateFilePath string,
cacheDir string,
) error {
notifier := tunnelnotifier.New(networkChangeListener, nil)
defer notifier.Close()
// in case of non Android os these variables will be nil
mobileDependency := MobileDependency{
TunAdapter: tunAdapter,
IFaceDiscover: iFaceDiscover,
NetworkChangeListener: notifier,
HostDNSAddresses: dnsAddresses,
DnsReadyListener: dnsReadyListener,
StateFilePath: stateFilePath,
TempDir: cacheDir,
}
return c.run(mobileDependency, nil, "")
}
func (c *ConnectClient) RunOniOS(
fileDescriptor int32,
networkChangeListener listener.NetworkChangeListener,
dnsManager dns.IosDnsManager,
stateFilePath string,
cacheDir string,
logFilePath string,
) error {
// Set GC percent to 5% to reduce memory usage as iOS only allows 50MB of memory for the extension.
debug.SetGCPercent(5)
notifier := tunnelnotifier.New(networkChangeListener, dnsManager)
defer notifier.Close()
mobileDependency := MobileDependency{
FileDescriptor: fileDescriptor,
NetworkChangeListener: notifier,
DnsManager: notifier,
StateFilePath: stateFilePath,
TempDir: cacheDir,
}
return c.run(mobileDependency, nil, logFilePath)
}
func (c *ConnectClient) run(mobileDependency MobileDependency, runningChan chan struct{}, logPath string) error {
// Mark the loop as started and signal exit on return so Stop can wait for
// the loop to finish (and skip the wait if the loop never ran).
c.runStarted.Store(true)
defer c.runOnce.Do(func() { close(c.runExited) })
defer func() {
if r := recover(); r != nil {
rec := c.statusRecorder
if rec != nil {
rec.PublishEvent(
cProto.SystemEvent_CRITICAL, cProto.SystemEvent_SYSTEM,
"panic occurred",
"The Netbird service panicked. Please restart the service and submit a bug report with the client logs.",
nil,
)
}
log.Panicf("Panic occurred: %v, stack trace: %s", r, string(debug.Stack()))
}
}()
// Stop metrics push on exit
defer func() {
if c.clientMetrics != nil {
c.clientMetrics.StopPush()
}
}()
log.Infof("starting NetBird client version %s on %s/%s", version.NetbirdVersion(), runtime.GOOS, runtime.GOARCH)
nbnet.Init()
// Initialize metrics once at startup (always active for debug bundles)
if c.clientMetrics == nil {
agentInfo := metrics.AgentInfo{
DeploymentType: metrics.DeploymentTypeUnknown,
Version: version.NetbirdVersion(),
OS: runtime.GOOS,
Arch: runtime.GOARCH,
}
c.clientMetrics = metrics.NewClientMetrics(agentInfo)
log.Debugf("initialized client metrics")
// Start metrics push if enabled (uses daemon context, persists across engine restarts)
if metrics.IsMetricsPushEnabled() {
c.clientMetrics.StartPush(c.ctx, metrics.PushConfigFromEnv())
}
}
backOff := &backoff.ExponentialBackOff{
InitialInterval: time.Second,
RandomizationFactor: 1,
Multiplier: 1.7,
MaxInterval: 15 * time.Second,
MaxElapsedTime: 3 * 30 * 24 * time.Hour, // 3 months
Stop: backoff.Stop,
Clock: backoff.SystemClock,
}
state := CtxGetState(c.ctx)
defer func() {
s, err := state.Status()
if err != nil || s != StatusNeedsLogin {
state.Set(StatusIdle)
}
}()
wrapErr := state.Wrap
myPrivateKey, err := wgtypes.ParseKey(c.config.PrivateKey)
if err != nil {
log.Errorf("failed parsing Wireguard key %s: [%s]", c.config.PrivateKey, err.Error())
return wrapErr(err)
}
var mgmTlsEnabled bool
if c.config.ManagementURL.Scheme == "https" {
mgmTlsEnabled = true
}
publicSSHKey, err := ssh.GeneratePublicKey([]byte(c.config.SSHKey))
if err != nil {
return err
}
var path string
if runtime.GOOS == "ios" || runtime.GOOS == "android" {
// On mobile, use the provided state file path directly
if !fileExists(mobileDependency.StateFilePath) {
if err := createFile(mobileDependency.StateFilePath); err != nil {
log.Errorf("failed to create state file: %v", err)
// we are not exiting as we can run without the state manager
}
}
path = mobileDependency.StateFilePath
} else {
sm := profilemanager.NewServiceManager("")
path = sm.GetStatePath()
}
stateManager := statemanager.New(path)
stateManager.RegisterState(&sshconfig.ShutdownState{})
if c.updateManager != nil {
c.updateManager.CheckUpdateSuccess(c.ctx)
}
inst := installer.New()
if err := inst.CleanUpInstallerFiles(); err != nil {
log.Errorf("failed to clean up temporary installer file: %v", err)
}
defer func() {
c.statusRecorder.SetSessionExpiresAt(time.Time{})
c.statusRecorder.ClientStop()
}()
operation := func() error {
// if context cancelled we not start new backoff cycle
if c.ctx.Err() != nil {
return nil
}
// suspend connection attempts while the OS reports no usable network
if waited, err := c.netMgr.Wait(c.ctx); err != nil {
return nil
} else if waited {
backOff.Reset()
}
state.Set(StatusConnecting)
engineCtx, cancel := context.WithCancel(c.ctx)
defer func() {
_, err := state.Status()
c.statusRecorder.MarkManagementDisconnected(err)
c.statusRecorder.CleanLocalPeerState()
cancel()
}()
log.Debugf("connecting to the Management service %s", c.config.ManagementURL.Host)
mgmClient, err := mgm.NewClient(engineCtx, c.config.ManagementURL.Host, myPrivateKey, mgmTlsEnabled,
mgm.WithNetEvents(c.netMgr))
if err != nil {
// On daemon shutdown / Down() the parent context is cancelled
// and the dial fails with "context canceled". Wrapping that
// into state would leave the snapshot stuck at Connecting+err
// until the backoff loop wakes up — instead let the operation
// return cleanly so the deferred state.Set(StatusIdle) takes
// effect on the next iteration.
if c.ctx.Err() != nil {
return nil
}
return wrapErr(gstatus.Errorf(codes.FailedPrecondition, "failed connecting to Management Service : %s", err))
}
mgmNotifier := statusRecorderToMgmConnStateNotifier(c.statusRecorder)
mgmClient.SetConnStateListener(mgmNotifier)
// Update metrics with actual deployment type after connection
deploymentType := metrics.DetermineDeploymentType(mgmClient.GetServerURL())
agentInfo := metrics.AgentInfo{
DeploymentType: deploymentType,
Version: version.NetbirdVersion(),
OS: runtime.GOOS,
Arch: runtime.GOARCH,
}
c.clientMetrics.UpdateAgentInfo(agentInfo, myPrivateKey.PublicKey().String())
log.Debugf("connected to the Management service %s", c.config.ManagementURL.Host)
defer func() {
if err = mgmClient.Close(); err != nil {
log.Warnf("failed to close the Management service client %v", err)
}
}()
// connect (just a connection, no stream yet) and login to Management Service to get an initial global Netbird config
loginStarted := time.Now()
loginResp, err := loginToManagement(engineCtx, mgmClient, publicSSHKey, c.config)
if err != nil {
c.clientMetrics.RecordLoginDuration(engineCtx, time.Since(loginStarted), false)
log.Debug(err)
if s, ok := gstatus.FromError(err); ok && (s.Code() == codes.PermissionDenied) {
state.Set(StatusNeedsLogin)
c.runCancel()
return backoff.Permanent(wrapErr(err)) // unrecoverable error
}
return wrapErr(err)
}
c.clientMetrics.RecordLoginDuration(engineCtx, time.Since(loginStarted), true)
c.statusRecorder.MarkManagementConnected()
if metricsConfig := loginResp.GetNetbirdConfig().GetMetrics(); metricsConfig != nil {
c.clientMetrics.UpdatePushFromMgm(c.ctx, metricsConfig.GetEnabled())
}
localPeerState := peer.LocalPeerState{
IP: loginResp.GetPeerConfig().GetAddress(),
PubKey: myPrivateKey.PublicKey().String(),
KernelInterface: device.WireGuardModuleIsLoaded() && !netstack.IsEnabled(),
FQDN: loginResp.GetPeerConfig().GetFqdn(),
}
c.statusRecorder.UpdateLocalPeerState(localPeerState)
signalURL := fmt.Sprintf("%s://%s",
strings.ToLower(loginResp.GetNetbirdConfig().GetSignal().GetProtocol().String()),
loginResp.GetNetbirdConfig().GetSignal().GetUri(),
)
c.statusRecorder.UpdateSignalAddress(signalURL)
c.statusRecorder.MarkSignalDisconnected(nil)
defer func() {
_, err := state.Status()
c.statusRecorder.MarkSignalDisconnected(err)
}()
// with the global Netbird config in hand connect (just a connection, no stream yet) Signal
signalClient, err := connectToSignal(engineCtx, loginResp.GetNetbirdConfig(), myPrivateKey, c.netMgr)
if err != nil {
log.Error(err)
return wrapErr(err)
}
defer func() {
err = signalClient.Close()
if err != nil {
log.Warnf("failed closing Signal service client %v", err)
}
}()
signalNotifier := statusRecorderToSignalConnStateNotifier(c.statusRecorder)
signalClient.SetConnStateListener(signalNotifier)
c.statusRecorder.MarkSignalConnected()
relayURLs, token := parseRelayInfo(loginResp)
if override, ok := peer.OverrideRelayURLs(); ok {
log.Infof("overriding relay URLs from %s: %v", peer.EnvKeyNBHomeRelayServers, override)
relayURLs = override
}
peerConfig := loginResp.GetPeerConfig()
engineConfig, err := createEngineConfig(myPrivateKey, c.config, peerConfig, logPath)
if err != nil {
log.Error(err)
return wrapErr(err)
}
engineConfig.TempDir = mobileDependency.TempDir
// Leave StateDir empty when there is no state path so a disk-backed
// syncstore falls back to os.TempDir() instead of filepath.Dir("") == ".".
if path != "" {
engineConfig.StateDir = filepath.Dir(path)
}
relayManager := relayClient.NewManager(engineCtx, relayURLs, myPrivateKey.PublicKey().String(), engineConfig.MTU,
relayClient.WithNetEvents(c.netMgr))
c.statusRecorder.SetRelayMgr(relayManager)
if len(relayURLs) > 0 {
if token != nil {
if err := relayManager.UpdateToken(token); err != nil {
log.Errorf("failed to update token: %s", err)
return wrapErr(err)
}
}
log.Infof("connecting to the Relay service(s): %s", strings.Join(relayURLs, ", "))
if err = relayManager.Serve(); err != nil {
log.Error(err)
}
}
checks := loginResp.GetChecks()
c.engineMutex.Lock()
engine := NewEngine(engineCtx, cancel, engineConfig, EngineServices{
SignalClient: signalClient,
MgmClient: mgmClient,
RelayManager: relayManager,
StatusRecorder: c.statusRecorder,
Checks: checks,
StateManager: stateManager,
UpdateManager: c.updateManager,
ClientMetrics: c.clientMetrics,
MetricsCtx: c.ctx,
NetMgr: c.netMgr,
}, mobileDependency)
engine.SetSyncResponsePersistence(c.persistSyncResponse)
c.engine = engine
c.engineMutex.Unlock()
if err := engine.Start(loginResp.GetNetbirdConfig(), c.config.ManagementURL); err != nil {
log.Errorf("error while starting Netbird Connection Engine: %s", err)
return wrapErr(err)
}
// Seed the session-expiry deadline from the LoginResponse. Subsequent
// changes flow in through SyncResponse and are applied in handleSync.
engine.ApplySessionDeadline(loginResp.GetSessionExpiresAt())
log.Infof("Netbird engine started, the IP is: %s", peerConfig.GetAddress())
state.Set(StatusConnected)
if runningChan != nil {
select {
case <-runningChan:
default:
close(runningChan)
}
}
<-engineCtx.Done()
c.engineMutex.Lock()
c.engine = nil
c.engineMutex.Unlock()
log.Infof("ensuring wg interface is removed, Netbird engine context cancelled")
if err := engine.Stop(); err != nil {
log.Errorf("Failed to stop engine: %v", err)
}
c.statusRecorder.ClientTeardown()
backOff.Reset()
log.Info("stopped NetBird client")
if _, err := state.Status(); errors.Is(err, ErrResetConnection) {
return err
}
return nil
}
c.statusRecorder.ClientStart()
// Wrap the backoff with c.ctx so Down()/actCancel propagates into the
// inter-attempt sleep — otherwise a 15s MaxInterval can keep the retry
// loop alive long after the caller asked to give up, leaving the
// status stream stuck at Connecting.
err = backoff.Retry(operation, backoff.WithContext(backOff, c.ctx))
if err != nil {
// Once the client context is cancelled backoff.WithContext surfaces the
// bare context error, and any attempt torn down mid-flight reports the
// same. That cancellation is the caller asking us to stop (Stop, Down or
// an engine restart), so exit cleanly instead of handing back a failure
// the caller would have to distinguish from a real one.
if c.ctx.Err() != nil && errors.Is(err, context.Canceled) {
log.Info("exiting client retry loop, context cancelled")
return nil
}
log.Debugf("exiting client retry loop due to unrecoverable error: %s", err)
if s, ok := gstatus.FromError(err); ok && (s.Code() == codes.PermissionDenied) {
state.Set(StatusNeedsLogin)
c.runCancel()
}
return err
}
return nil
}
func parseRelayInfo(loginResp *mgmProto.LoginResponse) ([]string, *hmac.Token) {
relayCfg := loginResp.GetNetbirdConfig().GetRelay()
if relayCfg == nil {
return nil, nil
}
token := &hmac.Token{
Payload: relayCfg.GetTokenPayload(),
Signature: relayCfg.GetTokenSignature(),
}
return relayCfg.GetUrls(), token
}
func (c *ConnectClient) Engine() *Engine {
if c == nil {
return nil
}
var e *Engine
c.engineMutex.Lock()
e = c.engine
c.engineMutex.Unlock()
return e
}
// GetLatestSyncResponse returns the latest sync response from the engine.
func (c *ConnectClient) GetLatestSyncResponse() (*mgmProto.SyncResponse, error) {
engine := c.Engine()
if engine == nil {
return nil, errors.New("engine is not initialized")
}
syncResponse, err := engine.GetLatestSyncResponse()
if err != nil {
return nil, fmt.Errorf("get latest sync response: %w", err)
}
if syncResponse == nil {
return nil, errors.New("sync response is not available")
}
return syncResponse, nil
}
// SetLogLevel sets the log level for the firewall manager if the engine is running.
func (c *ConnectClient) SetLogLevel(level log.Level) {
engine := c.Engine()
if engine == nil {
return
}
fwManager := engine.GetFirewallManager()
if fwManager != nil {
fwManager.SetLogLevel(level)
}
}
// Status returns the current client status
func (c *ConnectClient) Status() StatusType {
if c == nil {
return StatusIdle
}
status, err := CtxGetState(c.ctx).Status()
if err != nil {
return StatusIdle
}
return status
}
func (c *ConnectClient) Stop() error {
return c.StopWithContext(context.Background())
}
// StopWithContext cancels the run loop and waits for it to exit, giving up the
// wait when ctx is done and returning ctx.Err(). Giving up only abandons the
// wait: the run stays cancelled and finishes its teardown in the background, so
// a caller that returns early must not assume the engine is already gone.
func (c *ConnectClient) StopWithContext(ctx context.Context) error {
c.runCancel()
if !c.runStarted.Load() {
return nil
}
select {
case <-c.runExited:
return nil
case <-ctx.Done():
return ctx.Err()
}
}
// SetSyncResponsePersistence enables or disables sync response persistence.
// When enabled, the last received sync response will be stored and can be retrieved
// through the Engine's GetLatestSyncResponse method. When disabled, any stored
// sync response will be cleared.
func (c *ConnectClient) SetSyncResponsePersistence(enabled bool) {
c.engineMutex.Lock()
c.persistSyncResponse = enabled
c.engineMutex.Unlock()
engine := c.Engine()
if engine != nil {
engine.SetSyncResponsePersistence(enabled)
}
}
// createEngineConfig converts configuration received from Management Service to EngineConfig
func createEngineConfig(key wgtypes.Key, config *profilemanager.Config, peerConfig *mgmProto.PeerConfig, logPath string) (*EngineConfig, error) {
nm := false
if config.NetworkMonitor != nil {
nm = *config.NetworkMonitor
}
wgAddr, err := wgaddr.ParseWGAddress(peerConfig.Address)
if err != nil {
return nil, fmt.Errorf("parse overlay address %q: %w", peerConfig.Address, err)
}
if !config.DisableIPv6 {
if err := wgAddr.SetIPv6FromCompact(peerConfig.GetAddressV6()); err != nil {
log.Warn(err)
}
}
engineConf := &EngineConfig{
WgIfaceName: config.WgIface,
WgAddr: wgAddr,
IFaceBlackList: config.IFaceBlackList,
DisableIPv6Discovery: config.DisableIPv6Discovery,
WgPrivateKey: key,
WgPort: config.WgPort,
NetworkMonitor: nm,
SSHKey: []byte(config.SSHKey),
NATExternalIPs: config.NATExternalIPs,
CustomDNSAddress: config.CustomDNSAddress,
RosenpassEnabled: config.RosenpassEnabled,
RosenpassPermissive: config.RosenpassPermissive,
ServerSSHAllowed: util.ReturnBoolWithDefaultTrue(config.ServerSSHAllowed),
EnableSSHRoot: config.EnableSSHRoot,
EnableSSHSFTP: config.EnableSSHSFTP,
EnableSSHLocalPortForwarding: config.EnableSSHLocalPortForwarding,
EnableSSHRemotePortForwarding: config.EnableSSHRemotePortForwarding,
DisableSSHAuth: config.DisableSSHAuth,
DNSRouteInterval: config.DNSRouteInterval,
DisableClientRoutes: config.DisableClientRoutes,
DisableServerRoutes: config.DisableServerRoutes || config.BlockInbound,
DisableDNS: config.DisableDNS,
DisableFirewall: config.DisableFirewall,
BlockLANAccess: config.BlockLANAccess,
BlockInbound: config.BlockInbound,
DisableIPv6: config.DisableIPv6,
SyncMessageVersion: config.SyncMessageVersion,
LazyConnection: lazyconn.ParseState(config.LazyConnection),
MTU: selectMTU(config.MTU, peerConfig.Mtu),
LogPath: logPath,
ProfileConfig: config,
}
if config.PreSharedKey != "" {
preSharedKey, err := wgtypes.ParseKey(config.PreSharedKey)
if err != nil {
return nil, err
}
engineConf.PreSharedKey = &preSharedKey
}
port, err := freePort(config.WgPort)
if err != nil {
return nil, err
}
if port != config.WgPort {
log.Infof("using %d as wireguard port: %d is in use", port, config.WgPort)
}
engineConf.WgPort = port
return engineConf, nil
}
func selectMTU(localMTU uint16, peerMTU int32) uint16 {
var finalMTU uint16 = iface.DefaultMTU
if localMTU > 0 {
finalMTU = localMTU
} else if peerMTU > 0 {
finalMTU = uint16(peerMTU)
}
// Set global DNS MTU
dns.SetCurrentMTU(finalMTU)
return finalMTU
}
// connectToSignal creates Signal Service client and established a connection
func connectToSignal(ctx context.Context, wtConfig *mgmProto.NetbirdConfig, ourPrivateKey wgtypes.Key, netMgr *netevents.Manager) (*signal.GrpcClient, error) {
var sigTLSEnabled bool
if wtConfig.Signal.Protocol == mgmProto.HostConfig_HTTPS {
sigTLSEnabled = true
} else {
sigTLSEnabled = false
}
signalClient, err := signal.NewClient(ctx, wtConfig.Signal.Uri, ourPrivateKey, sigTLSEnabled,
signal.WithNetEvents(netMgr))
if err != nil {
log.Errorf("error while connecting to the Signal Exchange Service %s: %s", wtConfig.Signal.Uri, err)
return nil, gstatus.Errorf(codes.FailedPrecondition, "failed connecting to Signal Service : %s", err)
}
return signalClient, nil
}
// loginToManagement creates Management ServiceDependencies client, establishes a connection, logs-in and gets a global Netbird config (signal, turn, stun hosts, etc)
func loginToManagement(ctx context.Context, client mgm.Client, pubSSHKey []byte, config *profilemanager.Config) (*mgmProto.LoginResponse, error) {
sysInfo := system.GetInfo(ctx)
sysInfo.SetFlags(
config.RosenpassEnabled,
config.RosenpassPermissive,
config.ServerSSHAllowed,
config.DisableClientRoutes,
config.DisableServerRoutes,
config.DisableDNS,
config.DisableFirewall,
config.BlockLANAccess,
config.BlockInbound,
config.DisableIPv6,
config.SyncMessageVersion,
config.EnableSSHRoot,
config.EnableSSHSFTP,
config.EnableSSHLocalPortForwarding,
config.EnableSSHRemotePortForwarding,
config.DisableSSHAuth,
)
return client.Login(sysInfo, pubSSHKey, config.DNSLabels)
}
func statusRecorderToMgmConnStateNotifier(statusRecorder *peer.Status) mgm.ConnStateNotifier {
var sri interface{} = statusRecorder
mgmNotifier, _ := sri.(mgm.ConnStateNotifier)
return mgmNotifier
}
func statusRecorderToSignalConnStateNotifier(statusRecorder *peer.Status) signal.ConnStateNotifier {
var sri interface{} = statusRecorder
notifier, _ := sri.(signal.ConnStateNotifier)
return notifier
}
// freePort attempts to determine if the provided port is available, if not it will ask the system for a free port.
func freePort(initPort int) (int, error) {
addr := net.UDPAddr{Port: initPort}
conn, err := net.ListenUDP("udp", &addr)
if err == nil {
returnPort := conn.LocalAddr().(*net.UDPAddr).Port
closeConnWithLog(conn)
return returnPort, nil
}
// if the port is already in use, ask the system for a free port
addr.Port = 0
conn, err = net.ListenUDP("udp", &addr)
if err != nil {
return 0, fmt.Errorf("unable to get a free port: %v", err)
}
udpAddr, ok := conn.LocalAddr().(*net.UDPAddr)
if !ok {
return 0, errors.New("wrong address type when getting a free port")
}
closeConnWithLog(conn)
return udpAddr.Port, nil
}
func closeConnWithLog(conn *net.UDPConn) {
startClosing := time.Now()
err := conn.Close()
if err != nil {
log.Warnf("closing probe port %d failed: %v. NetBird will still attempt to use this port for connection.", conn.LocalAddr().(*net.UDPAddr).Port, err)
}
if time.Since(startClosing) > time.Second {
log.Warnf("closing the testing port %d took %s. Usually it is safe to ignore, but continuous warnings may indicate a problem.", conn.LocalAddr().(*net.UDPAddr).Port, time.Since(startClosing))
}
}