* fix(proxy): gate tunnel-peer fast-path on inbound listener marker
forwardWithTunnelPeer previously accepted any RFC1918 / ULA / CGNAT
source IP, so a public client whose address happened to fall in those
ranges could bypass the configured operator auth scheme by colliding
with a known tunnel IP. The fast-path is now gated on
TunnelLookupFromContext(r.Context()) being present — that context value
is attached only by the per-account inbound (overlay) listener, so the
host-facing listener never enters this branch.
Tests updated to reflect the new requirement: requests that don't
carry the inbound marker now fall through to the regular auth flow.
* fix(proxy): harden inbound listener resource + startup-ctx handling
Three correctness fixes on the per-account inbound path, with tests:
- Close the logrus ErrorLog PipeWriter on tearDown. WriterLevel hands
back an *io.PipeWriter backed by a pipe + scanner goroutine that the
caller owns; the two writers per account (https + plain) were never
closed, leaking the pipe and goroutine on every teardown.
- Run the post-Start hooks on context.Background(). runClientStartup
is launched in a goroutine from AddPeer and was inheriting the
caller's request-scoped ctx, so a cancelled request could abort the
inbound bring-up or fail the management status notification. The
tail is split into notifyClientReady so the contract is testable.
Tests cover the PipeWriter close behaviour and assert the readyHandler
+ NotifyStatus calls receive a non-cancelled background context.
* feat(proxy): short-circuit peer-own-target loops with 421
When a peer that hosts the target of a private service dials its own
service URL the request was being looped through the proxy and back
over WireGuard to the same peer — twice the WG round-trip for no
benefit, with no signal to the caller that something was wrong.
Add isSelfTargetLoop to ReverseProxy.ServeHTTP: when the request
arrived on the per-account overlay listener (IsOverlayOrigin) and the
source tunnel IP matches the target host, refuse the request with 421
Misdirected Request and a body pointing the operator at the backend
directly.
The gate is scoped to overlay origin so requests on the public
listener that happen to share a source IP with the target host are
forwarded normally.
* fix(management): private-service validation + tunnel-IP lookup semantics
- Require an explicit port for L4 cluster targets. validateL4Target
exempted TargetTypeCluster from the port check, but buildPathMappings
serializes every L4 target via net.JoinHostPort(host, port) — port=0
shipped a ":0" upstream. Cluster targets use the same Host/Port
fields, so the same requirement applies.
- GetPeerByIP returns NotFound on a tunnel-IP miss instead of mapping
every error to Internal. The proxy's ValidateTunnelPeer probes IPs
that legitimately aren't in the roster; the miss is expected and now
distinguishable from a real store failure.
- Thread ctx into getClusterCapability's gorm query so a cancelled
request doesn't keep the store busy.
Tests updated for the L4-cluster port requirement and the GetPeerByIP
NotFound path.
* fix(client): include offlinePeers in PeerStateByIP lookup
ReplaceOfflinePeers moves peers into d.offlinePeers but PeerStateByIP
only scanned d.peers. Callers (the local DNS filter via
localPeerConnectivity, embed.Client.IdentityForIP used by the
proxy's tunnel-peer validator) were treating known-but-offline peers
as unknown, which:
- causes the DNS filter to keep returning records pointing at peers
that have no live tunnel, AND
- makes the proxy's local-roster check deny a request from such a
peer rather than letting the cached management RPC carry the
authorisation decision.
Search both slices in PeerStateByIP. Adds a unit test for the IPv4
and IPv6 offline-match paths.
* fix(rest): reject empty Delete path params in reverse-proxy clients
ReverseProxyClustersAPI.Delete and ReverseProxyTokensAPI.Delete passed
the path parameter into url.PathEscape without an empty check.
PathEscape("") returns "" which collapses the request onto the
collection endpoint ("/api/reverse-proxies/clusters/" /
"/api/reverse-proxies/proxy-tokens/"), so a caller bug delete with no
id reached a routable URL with surprising semantics (typically 405).
Short-circuit with a typed error before the request is built. Tests
mount a handler on the collection path that fails the test if hit, so
the regression is impossible to reintroduce silently.
* chore(api,ci,docs,test): private-service schema, proto-check, fixups
Non-functional cleanups and contract/CI hardening around the
private-service work:
API schema (openapi.yml):
- Require a non-empty access_groups and mode=http when private=true,
on both Service and ServiceRequest, mirroring
validatePrivateRequirements. mode stays optional-but-constrained
(empty defaults to http server-side), matching runtime.
CI (proto-version-check.yml):
- Cover renamed .pb.go files (read base via previous_filename).
- Match protoc-gen-go-grpc version headers (optional "- " prefix and
-gen-go-grpc suffix) so grpc-generated files are in scope.
Docs / comments:
- Reword Config field docs to say defaults are applied at Server.Start
(initDefaults), not New.
- Rename the obsolete --private-inbound flag to --private across
comments and the proto doc.
Pre-existing test fixups surfaced by review:
- Repair the integration-tagged validate_session_test.go (SignToken
signature growth + new Manager interface methods).
- Fix the CI-skip boolean precedence so Windows isn't skipped
unconditionally.
- Guard the router.HTTPListener type assertion with comma-ok.
* fix(proxy): background ctx for already-started AddPeer notification
The earlier ctx fix covered the async runClientStartup path but missed
the synchronous branch: when a service is added to an already-started
client, AddPeer called NotifyStatus with the caller's request-scoped
ctx. A cancelled request/stream could drop the connected notification
to management. Use context.Background() here too, matching
notifyClientReady.
Extends TestNetBird_AddPeer_ExistingStartedClient_NotifiesStatus to
pass a pre-cancelled caller ctx and assert the notification still ran
on a non-cancelled context.
* use the cmd context for roundtripper
* add SSO session extend flow (management)
Adds the management-server half of the SSO session-extension feature:
- New ExtendAuthSession gRPC RPC that refreshes a peer's session expiry
using a fresh JWT, validated through the same pipeline as Login but
without tearing down the tunnel or redoing the NetworkMap sync.
- Per-peer SessionExpiresAt timestamp on every LoginResponse and
SyncResponse so connected clients learn the deadline on the existing
long-lived stream, and admin-side changes (toggling expiration,
changing the expiration window) reach every peer within seconds.
- SessionExpiresAt(...) helper on Peer that derives the absolute UTC
deadline from LastLogin + the account-level PeerLoginExpiration
setting, returning zero when the peer is not SSO-tracked or expiration
is disabled.
The matching client-side consumer of these fields lands separately.
* encode SessionExpiresAt as 3-state on the wire
Previously the `sessionExpiresAt` field on LoginResponse, SyncResponse
and ExtendAuthSessionResponse was 2-state: a valid timestamp meant
"new deadline", and nil meant "clear". That conflated two distinct
meanings — "no info in this snapshot" vs "expiry is explicitly off /
peer is not SSO-tracked" — so a Sync push that legitimately couldn't
compute the deadline (settings lookup failed) would silently clear the
client's anchor and lose the warning window.
Three states now, encoded on the same field number (no .proto schema
churn — only comments and the server-side encoder change):
- nil pointer (field absent) → "no info"; client preserves anchor
- &Timestamp{} (seconds=0, nanos=0) → explicit "disabled / not SSO"
sentinel; client clears
- valid timestamp → new absolute UTC deadline
A new encodeSessionExpiresAt helper centralises the zero/non-zero
encoding and is shared by the Sync, Login and ExtendAuthSession
builders. The Sync builder still emits nil when settings are missing.
Login and ExtendAuthSession always carry an authoritative value.
The matching client-side decoder lands on feature/session-extend.
* add UserExtendedPeerSession activity event
ExtendAuthSession previously reused UserLoggedInPeer for its audit
record, which conflated two distinct user actions: a full interactive
SSO login (tunnel re-established, network map resync) versus an
in-place deadline refresh (tunnel untouched). Auditors reading the log
couldn't tell which one happened, and downstream dashboards/alerts on
"login" volume were polluted by routine extends.
Adds a dedicated UserExtendedPeerSession Activity (code 125,
"user.peer.session.extend") and switches ExtendPeerSession over to it.
The peer-extend audit trail is now distinguishable from interactive
logins.
* make ExtendAuthSession JWT-retry backoff cancellable
Skip the retry log and 200ms wait on the final attempt, and replace the
uncancellable time.Sleep with a select on time.After/ctx.Done so an
upstream cancellation aborts the wait instead of running it to
completion.
Adds a new "private" service mode for the reverse proxy: services reachable exclusively over the embedded WireGuard tunnel, gated by per-peer group membership instead of operator auth schemes.
Wire contract
- ProxyMapping.private (field 13): the proxy MUST call ValidateTunnelPeer and fail closed; operator schemes are bypassed.
- ProxyCapabilities.private (4) + supports_private_service (5): capability gate. Management never streams private mappings to proxies that don't claim the capability; the broadcast path applies the same filter via filterMappingsForProxy.
- ValidateTunnelPeer RPC: resolves an inbound tunnel IP to a peer, checks the peer's groups against service.AccessGroups, and mints a session JWT on success. checkPeerGroupAccess fails closed when a private service has empty AccessGroups.
- ValidateSession/ValidateTunnelPeer responses now carry peer_group_ids + peer_group_names so the proxy can authorise policy-aware middlewares without an extra management round-trip.
- ProxyInboundListener + SendStatusUpdate.inbound_listener: per-account inbound listener state surfaced to dashboards.
- PathTargetOptions.direct_upstream (11): bypass the embedded NetBird client and dial the target via the proxy host's network stack for upstreams reachable without WireGuard.
Data model
- Service.Private (bool) + Service.AccessGroups ([]string, JSON- serialised). Validate() rejects bearer auth on private services. Copy() deep-copies AccessGroups. pgx getServices loads the columns.
- DomainConfig.Private threaded into the proxy auth middleware. Request handler routes private services through forwardWithTunnelPeer and returns 403 on validation failure.
- Account-level SynthesizePrivateServiceZones (synthetic DNS) and injectPrivateServicePolicies (synthetic ACL) gate on len(svc.AccessGroups) > 0.
Proxy
- /netbird proxy --private (embedded mode) flag; Config.Private in proxy/lifecycle.go.
- Per-account inbound listener (proxy/inbound.go) binding HTTP/HTTPS on the embedded NetBird client's WireGuard tunnel netstack.
- proxy/internal/auth/tunnel_cache: ValidateTunnelPeer response cache with single-flight de-duplication and per-account eviction.
- Local peerstore short-circuit: when the inbound IP isn't in the account roster, deny fast without an RPC.
- proxy/server.go reports SupportsPrivateService=true and redacts the full ProxyMapping JSON from info logs (auth_token + header-auth hashed values now only at debug level).
Identity forwarding
- ValidateSessionJWT returns user_id, email, method, groups, group_names. sessionkey.Claims carries Email + Groups + GroupNames so the proxy can stamp identity onto upstream requests without an extra management round-trip on every cookie-bearing request.
- CapturedData carries userEmail / userGroups / userGroupNames; the proxy stamps X-NetBird-User and X-NetBird-Groups on r.Out from the authenticated identity (strips client-supplied values first to prevent spoofing).
- AccessLog.UserGroups: access-log enrichment captures the user's group memberships at write time so the dashboard can render group context without reverse-resolving stale memberships.
OpenAPI/dashboard surface
- ReverseProxyService gains private + access_groups; ReverseProxyCluster gains private + supports_private. ReverseProxyTarget target_type enum gains "cluster". ServiceTargetOptions gains direct_upstream. ProxyAccessLog gains user_groups.
Remove client secret from gRPC auth flow. The secret was originally included to support providers like Google Workspace that don't offer a proper PKCE flow, but this is no longer necessary with the embedded IdP. Deployments using such providers should migrate to the embedded IdP instead.
Auto-update logic moved out of the UI into a dedicated updatemanager.Manager service that runs in the connection layer. The
UI no longer polls or checks for updates independently.
The update manager supports three modes driven by the management server's auto-update policy:
No policy set by mgm: checks GitHub for the latest version and notifies the user (previous behavior, now centralized)
mgm enforces update: the "About" menu triggers installation directly instead of just downloading the file — user still initiates the action
mgm forces update: installation proceeds automatically without user interaction
updateManager lifecycle is now owned by daemon, giving the daemon server direct control via a new TriggerUpdate RPC
Introduces EngineServices struct to group external service dependencies passed to NewEngine, reducing its argument count from 11 to 4
* **New Features**
* Access logs now include bytes_upload and bytes_download (API and schemas updated, fields required).
* Certificate issuance duration is now recorded as a metric.
* **Refactor**
* Metrics switched from Prometheus client to OpenTelemetry-backed meters; health endpoint now exposes OpenMetrics via OTLP exporter.
* **Tests**
* Metric tests updated to use OpenTelemetry Prometheus exporter and MeterProvider.
CLI: new expose command to publish a local port with flags for PIN, password, user groups, custom domain, name prefix and protocol (HTTP default).
Management/API: create/renew/stop expose sessions (streamed status), automatic naming/domain, TTL renewals, background expiration, new management RPCs and client methods.
UI/API: account settings now include peer_expose_enabled and peer_expose_groups; new activity codes for peer expose events.
* **New Features**
* SSH server JWT validation now accepts multiple audiences with backward-compatible handling of the previous single-audience setting and a guard ensuring at least one audience is configured.
* **Tests**
* Test suites updated and new tests added to cover multiple-audience scenarios and compatibility with existing behavior.
* **Other**
* Startup logging enhanced to report configured audiences for JWT auth.
Two new boolean flags, SearchDomainDisabled and SkipPTRProcess, are added to CustomZone and its protobuf; they are propagated through the engine to DNS host logic. Host matching now uses SearchDomainDisabled directly, and PTR collection skips zones with SkipPTRProcess; reverse zones are initialized with SearchDomainDisabled: true.
- Port dnat changes from https://github.com/netbirdio/netbird/pull/4015 (nftables/iptables/userspace)
- For userspace: rewrite the original port to the target port
- Remember original destination port in conntrack
- Rewrite the source port back to the original port for replies
- Redirect incoming port 5353 to 22054 (tcp/udp)
- Revert port changes based on the network map received from management
- Adjust tracer to show NAT stages
makes the DNS forwarder port configurable in the management and client components, while changing the well-known port from 5454 to 22054. The change includes version-aware port assignment to ensure backward compatibility.
- Adds a configurable `ForwarderPort` field to the DNS configuration protocol
- Implements version-based port computation that returns the new port (22054) only when all peers support version 0.59.0 or newer
- Updates the client to dynamically restart the DNS forwarder when the port changes
