* [client] Resolve profiles for the sudo invoking user instead of root
The SSH server flags force `netbird up` through sudo, but the CLI resolved
every per-user path with the process user. As root that reads root's own
(empty) local state, so a `sudo netbird up` silently switched the daemon from
the user's profile to the default one — cancelling any login already waiting
in the browser — and then ran an SSO login for the default profile's config.
Whichever account that login returned, the default profile's peer belongs to
someone else, so every attempt ended in "peer is already registered by a
different User or a Setup Key", with nothing telling the user why.
Resolve the acting user through SUDO_USER when running as root: the active
profile, the profile config paths and the stored account email now come from
the invoking user's directories. Privilege decisions are untouched — they stay
on the kernel credentials of the daemon connection, which an environment
variable can never influence; a forged SUDO_USER only selects a profile root
could select anyway.
The invoking user's directories are strictly read-only under sudo. Anything
root wrote there would be root-owned and break the user's own runs, so instead
of chowning files back, the local writes are skipped: the active-profile
bookkeeping and the account-email state simply do not update from a sudo run
(the daemon records the switch on its side; a skipped email write costs at
most one extra account prompt later).
Plain root — no sudo context — has no user to act for, so the ambiguity is
refused instead of guessed at: when the daemon's active profile differs from
what root resolves and no --profile was given, up fails with a message naming
both profiles, instead of silently switching the daemon and failing later with
the ownership error.
* [client] Act on the daemon-resolved profile and fail closed in the root guard
Under sudo the local active-profile mirror is not updated, so up/login
re-reading it after a profile switch acted on the previous profile; use
the daemon-resolved ID directly instead. The plain-root guard now runs
after the readiness wait, denies on lookup errors and empty responses,
and matches the owning username as well; an unowned profile (fresh
install) and a daemon predating the RPC stay allowed. Write-skip
decisions key off the sudo environment alone so a transient user lookup
failure cannot turn a run into writing root-owned files into the user's
directory, and RemoveProfileState honors the read-only rule too.
* [client] Return a wrapped error instead of double-reporting the dial failure
* [client] Read the profile from the daemon when the local mirror is not authoritative
Under sudo without --profile, `up` took the active profile from the invoking
user's local active_profile.txt mirror and drove the daemon to it. But that
mirror is never written under sudo (the SwitchProfile write is a no-op), so it
goes stale after any --profile run and silently switches the daemon back to the
mirror's default. The plain-root guard was meant to refuse exactly this
ambiguity but only ran for plain root, never for the sudo case the fix targets.
When there is no --profile and the mirror is not authoritative (sudo or plain
root), take the profile the daemon already holds for the invoking user instead
of the stale mirror: stay on the user's current profile when the daemon owns it
(or it is unowned, as on a fresh install), and refuse with a --profile hint when
the daemon is on another user's profile. A daemon predating the RPC keeps the
mirror-derived profile.
Reproduce (before this change):
1. As a non-root user misha, with the daemon installed and running:
sudo netbird up --profile work
misha connects on the `work` profile.
2. Because the local mirror write is skipped under sudo,
~misha/.config/netbird/active_profile.txt still says `default` (or is still
absent, which also resolves to `default`).
3. Run a bare:
sudo netbird up
The CLI reads `default` from the frozen mirror and sends ProfileName=default;
the daemon silently switches away from `work` and brings the tunnel up on
`default` — a different account/peer than the one last chosen, with no
warning. After this change step 3 stays on `work`.
* [client] Return a sentinel error instead of nil-nil for the missing daemon RPC
* [client] Load the extend-session hint from the resolved profile
* [client] Fail closed instead of reading root's config when the sudo user lookup fails
* [client] Fail closed in InvokingUser when the sudo user lookup fails
A previous change made baseConfigDir fail closed when SUDO_USER cannot be
resolved, but InvokingUser still fell through to user.Current(). Those two
guards disagreed: the active-profile mirror and the email state refused to
read root's directory, while every profile-path caller happily resolved as
root.
The consequence of a transient NSS failure under sudo was that
Profile.FilePath resolved through getConfigDirForUser("root"), creating
/var/lib/netbird/root and reading the profile JSON from there, and the CLI
sent Username "root" to the daemon in SetConfig and ListProfiles, so the
daemon resolved the same phantom namespace. The invoking user was silently
moved onto a root-owned profile instead of being told the lookup failed.
Fail closed at the single source of the fallback. getConfigDirForUser is
left alone on purpose: it is a pure path helper that also serves
daemon-supplied usernames, and under sudo with a successful lookup it must
still create the invoking user's own profile directory.
* Initial scaffolding
* Applies MDM override
* Unit tests
* Helpers business logic
* Return error if trying to modify any config that is gated by MDM
* Add ManagedFields to returned config over GetConfig
* Adds initial 101 MDM policy business logic testing
* gRPC MDM changes
* MDM Name scoping for clarity
* Implements windows loading of MDM policy
* Adds missing WGPort config
* Cleanup setupKey to align to linear
* Align split tunnel code
* Adds some log
* Prefix every log with MDM
* Adds debug config cobra command
This can be useful for troubleshooting and checking config
now that its resolution is not trivial
defaults > config > env cars > CLI/UI > MDM
* Adds MDM 1m diff checker & reloader
* Adds also up/start after cancel
* Publishes event for UI to sync upon MDM changes
* Add events to resync UI to actual config
This also provide fixup for UI no aligning to changed config when coming from cli up with config flags.
* UI behavior conflicts relaxation
UI sends full config snapshot with all values. It doesn't
make sense to block it if the values are aligned with the
values constrained by the MDM policy. It's just simplier
to allow values that are compliant. (this goes for the CLI
as well at this point)
* Lock toggle Settngs
* Advanced Settings locking
* Fixup presharedkey
* Apply MDM locks
* Toggle gray in/out for Advanced Settings
* Adds support for disabling of Profiles and UpdateSettings feature flags
* Adds Gate Login as well when --disable-update-settings=true is given to service
This commit tries to settle things with an old PR-4237 which had relaxed
the case where the SetConfig returned an `Unavailable` code error.
Under this circumnstance the PR allowed the upFunc to just emit a warning and
progress further with the login gRPC. Since the login call is consuming
the --management-url coming from the `up` command, it might be possible
to abuse the "Unavailable" code to inject a management URL that is different
from the configured one even though the --disable-update-settings is set
to true (?)
* Evaluate disable-update-settings errors only when there's an actual override
* [UI] Fixup advanced Settings
* [UI] Fixup for preshared key
* [UI] Fixup for profile enable/disable toggle
We need to align the initial state to evaluate the delta in case.
The initial state has to be "true" since the profile starts visible.
Then we receive MDM and transition the cache bool value to the actual
MDM imposed state
* Enforces disable networks
* [UI] Aligns to "enable/disable once on change only"
* Fixup: MDM wins. always
* Removes --disable-advanced-settings
It was a typo in our meetings. the actual thing is --disable-update-settings
* [PROTO] Removes --disable-advanced-settings
* [UI] Removes --disable-advanced-settings
* Pins feat profile retrieval to notif event
* [UI] Fix for "hide" not working when propagating to parent with children
* Adds dep for reading plist files
* Introduces support for darwing plist loading
* Tests MDM config reload via ticker
* [PROVISIONING] ADMX/ADML/PS/bash scripts/templates
* CI fixes
- Add docstrings to `mdm_integration`
- refactor for cognitive complexity
- mod tidy
* Linting
* Add docstrings to `mdm_integration`
* nil,nil is no policy and no error. Allow it
* nil,nil is no policy and no error. Allow it
* exclude MDM profile adminstrated keys data from debug bundle
* Fixes Rosenpass left disable after MDM unlock
* Partial revert coderabbit added docstrings
* Renaming fix
* Avoid locking on clientRunning bool when the connection is aborted for whatever reason
We want to just signal this through the giveUpChan, we will manage the signal from
the waiter side and in case set it to false there. THis way we avoid locking,
which should allow the MDM down+wait_for_term_chan_signal_+up procedure
clientRunning is used to signal two different conditions here:
1. the initialization procedure is over (we have an engine)
2. the connection being up (or being attempted)
Probably these two functionalities should not alias, and the failure of the second condition
(because of any error) should just drive a reconnection (currently it's not happening,
and we silently go idle).
OR, mor probably, the two things are the SAME and there should not exist a case where
we did the "Up" initialization and connection attempt but we are not still attempting it.
* Moves test helper at te very bottom
* Addresses github comments
* No lock no copy
* Prevents engine not stopping within 10 secs from being paired by another instance
We instead juts SKIP updating the policy, so
1. the MDM ticker will kick in 1 minute time,
2. find the policy misaligned,
3. enter the onMDMPolicyChange,
4. find the s.clientRunning == true
(because it is set to false only in server cleanupConnection,
and not by s.actCancel())
5. call s.actCancel() again if not nil
6. immediately return from <-s.clientGiveUpChan
7. finally call s.restartEngineForMDMLocked()
* Since we ARE running there should be a config
If the config was cancelled midflight, connect will abort later on
* DisableAutoConnect should not stop a running connection.
DisableAutoConnect should just avoid the connection attempts *when the service starts*.
If we are started and we are up and running, DisableAutoConnect should not kick in.
Another PR will follow about this topic
* Removes unused vars
* Moves callback into Run method arg
* align comment to removal of DisableAutoConnect
DisableAutoConnect should just avoid the connection attempts *when the service starts*.
If we are started and we are up and running, DisableAutoConnect should not kick in
* Removes unused managed_fields data.
This was initially used to drive the UI but approach changed
to reload config/features upon notifications which makes this data redundant.
* Reorder stuff
* Unexport unrequired vars/functions
PoliciesEqual → policiesEqual
AllKeys → allKeys
* Adds list of MDM managed fields in the debug bundle
* Adds heuristic to detect an edge case on Linux where a system has configured logrotate as a separate service to rotate log files which would mangle our client log files. If we detect logrotate being configured for netbird, we disable our rotation.
* Adds new env var to disable log rotation: NB_LOG_DISABLE_ROTATION
* Adds compressed and plain logrotate files to debug bundle.
* Replaces lumberjack with timberjack (maintained fork with bug fixes and extra features).
* Clarifies which daemon version is running in the bundle stats.
* Change logging for client service status to console
The status cmd will not be blocked by the ICE probe
Refactor the TURN and STUN probe, and cache the results. The NetBird status command will indicate a "checking…" state.
introduces a new flag --filter-by-connection-type to the status command.
It allows users to filter peers by connection type (P2P or Relayed) in both JSON and detailed views.
Input validation is added in parseFilters() to ensure proper usage, and --detail is auto-enabled if no output format is specified (consistent with other filters).
Add an upload bundle option with the flag --upload-bundle; by default, the upload will use a NetBird address, which can be replaced using the flag --upload-bundle-url.
The upload server is available under the /upload-server path. The release change will push a docker image to netbirdio/upload image repository.
The server supports using s3 with pre-signed URL for direct upload and local file for storing bundles.
* Add status anonymization
* Add OS/arch to the status command
* Use human-friendly last-update status messages
* Add debug bundle command to collect (anonymized) logs
* Add debug log level command
* And debug for a certain time span command
