The updater runs as LocalSystem and started netbird-ui via
CreateProcessAsUser with a nil environment, so the UI inherited the
SYSTEM environment (USERPROFILE, APPDATA pointing at systemprofile)
while running under the user's token. The WebView2-based UI exits
immediately in that state, so the UI never came back after an update.
Build the environment from the user's token with CreateEnvironmentBlock
and pass it to CreateProcessAsUser.
Android never reported its local network interfaces, so PeerNetworkRange posture checks could not be evaluated: NetworkAddresses always arrived empty.
net.Interfaces() is unusable on Android 11+ (SELinux blocks netlink), so the addresses are parsed from the interface description the host app already provides via stdnet.ExternalIFaceDiscover. The MAC filter is skipped, mirroring #5906
for iOS, since Android does not expose MACs either and nothing reads Mac server side.
Stop the UI before a silent Windows update and suppress the installer reboot
On silent MSI updates msiexec could reboot the machine on its own. The running UI holds a lock on its own exe, and since msiexec runs as LocalSystem it cannot close the interactive user's UI via Restart Manager, so the MSI scheduled the
file replacement for the next reboot and marked the install restart-required.
Terminate netbird-ui.exe before launching the installer and wait until its image file is released; the existing deferred restart brings it back after the install on every exit path
Run msiexec with /norestart REBOOT=ReallySuppress so it never reboots on its own
Treat exit codes 3010/1641 as success with a warning instead of a failure
---------
Co-authored-by: Viktor Liu <viktor@netbird.io>
* [client] Clear stale installer result before starting update
The installer result file could survive a previous update attempt (e.g.
when the updater wrote it after the restarted daemon already ran its
startup check). A new install attempt left the old file in place, so the
GUI progress window's first GetInstallerResult poll read the outdated
result: a stale success made the GUI quit mid-install, which cancelled
the TriggerUpdate context and aborted the artifact verification; a stale
error surfaced a bogus failure dialog for a succeeding update.
Remove any leftover result file at the start of RunInstallation, before
the download begins, so result watchers only see the current attempt's
outcome.
* [client] Align stale-result warning with log message style
On network changes the client restarted the whole engine. That is heavy-handed and slow: it tears down working state to recover from a transition the engine could handle itself. This replaces the restart with proper network event handling.
Suspend the retry loops while no network is available. Instead of burning through backoff intervals against an unreachable network, the reconnection loops park until the OS reports a usable network again.
Reconnect immediately on a network switch. When the OS hands us a new network, connections bound to the old one are swept and re-dialed right away, rather than waiting for a timeout to notice they are dead.
Adds an SSHClient gomobile binding so the Android app can run an SSH session over the tunnel with a PTY, exposed through a listener interface for the in-app terminal.
Server type is auto-detected from the SSH banner, which selects the auth path: JWT device-code flow, NetBird key, or a regular server (NetBird key first, then password). Host keys are verified against the peer registry for NetBird servers and trust-on-first-use for regular ones.
The receiver reported progress once per file, after the whole body had
been staged: spool.Write drains its reader before returning, so a large
file sat at nothing until it jumped to done. It now stages through a
reader that reports as the bytes land, the same way the sender already
did, and both sides thin their reports to one per percent and one per
200ms so a fast transfer cannot flood the history or the UI.
Progress also becomes an event of its own. It was left out because a
report per byte would have been unusable; thinned, it costs a handful of
events a second and spares every UI a poll. The daemon's event bridge
ignores the new kind, so nothing is published where a notification would
be noise.
Withdrawing consent mid-transfer did nothing. Cancel routed through
Decide, which only moves an offer out of Pending, so an accepted offer
kept its decision, kept its spool, and kept being uploaded into: the
receiver's list went quiet while the sender ran to completion. Revoke
takes an offer back whatever it has already answered, the staging reader
gives up as soon as consent is gone, and the sender stops rather than
retrying a refusal three times over. A transfer withdrawn this way reads
as declined on both ends, which is what it is, rather than as a failure.
Android re-establishes the VpnService interface on every route change, which
replaces tun0 with a fresh device. The file drop listeners are bound to the
overlay address of the interface being swapped out: the IPv4 one dies with
accept4: invalid argument and never comes back, so a peer dialing the overlay
IPv4 address gets an RST. Restart the receiver once the new device is in place.
Files move directly between peers over the overlay, with no server in the
path. The receiver listens on the WireGuard address only, so the port is
unreachable from outside the tunnel, and every offer is matched to a known
peer before anything is read.
Consent is the default: an offer carries metadata alone, and no payload
moves until the receiver accepts. Policy is per profile and device-local —
off, ask, or auto-accept, with per-sender exceptions on top.
Policy and history live in the profile's preferences, so removing a profile
takes its file drop state with it. Transfers interrupted by a restart are
settled on load; nothing survives to finish them, and left alone they would
sit in the log as permanently pending.
The Android bindings pull payload bytes through a chunk-returning stream:
gomobile copies a []byte argument into a fresh Java array and never copies
it back, so a fill-my-buffer method would hand back the right length with
no data.
Introduce a namespaced preference store owned by the profile manager,
persisted next to the profile config as <id>.prefs.json and deleted with
the profile. Sections are opaque JSON, so the profile manager stays free
of any feature schema, and writes reuse the state file's atomic path.
Migrate the Android SSH known-hosts store and session list onto it. Both
previously lived outside the profile lifecycle: known hosts in a
per-profile file under filesDir, the session list in Java
SharedPreferences, each needing its own sweep against the live profile
list to avoid outliving the profile they belonged to. A profile ID that
got reused would have inherited the trusted keys of a deleted profile.
Both now share the "ssh" and "ssh-sessions" namespaces of the profile's
preferences, so deleting a profile takes them along and the Java-side
pruning is gone.
The known-hosts entries keep the OpenSSH line format, only the container
changed, and host key verification keeps rejecting a changed key
outright. SetKnownHostsPath becomes SetKnownHostsStore, taking the
config dir and profile ID instead of a file path.
Existing known-hosts files are not migrated: hosts trusted before this
change prompt for confirmation once more, which errs towards safety.
* [docs] Update agent-network docs for management-owned pricing
The docs still described the retired proxy-side pricing: pricing.Loader,
pricing_path, MiddlewareDataDir, embedded defaults_pricing.yaml, and the
symlink-safe Unix loader. Rewrite them for the current design — management
synthesizes the whole table and ships it in cost_meter's ConfigJSON, so the
proxy carries no price list and has nothing to reload.
* [client] Pass stored email as login hint from UI and keep it on logout
Follow the CLI pattern: the Wails UI now reads the account email from the
user-owned profile state file and passes it as the OIDC login_hint on login
and session extend, since the daemon-side fallback runs as root and cannot
see the user's state file. Logout no longer deletes the stored email, so a
later login preselects the account at the IdP; profile removal remains the
operation that deletes it.
* [client] Log ignored profile lookup errors in extend-session hint fallback
* [client] Skip IPv6 route tests when the default nexthop is unusable
ensureIPv6DefaultRoute treated a successful netlink RouteAdd as proof that
a usable IPv6 nexthop exists. Installing ::/0 via loopback can succeed while
the kernel still rejects that nexthop for a concrete prefix, which surfaced
on ubuntu22/20260810.260 runners as:
add route to table: netlink add route: invalid argument
Probe the resolved nexthop by installing and removing a discard-prefix route
through the same code path the tests use, and skip when it fails. EEXIST
means the nexthop already carries a route, so it counts as usable.
* [client] Probe the IPv6 nexthop through raw netlink
addRoute swallows EAFNOSUPPORT and EOPNOTSUPP via isOpErr, so a nil return
did not prove the probe route was installed. Call netlink directly so an
unsupported operation skips the test instead of passing as usable.
GetOAuthFlow was the only flow factory without a hint parameter, which
forced its callers to apply the hint afterwards through a local setter
interface and a type assertion. Give it the same constructor-style hint
as NewOAuthFlow and set the hint on the concrete flows before they are
handed out as the interface, so a flow is always complete when built
and the caller-side ordering constraint disappears.
An empty hint is a valid value meaning the IdP chooses the account, so
the flows set it unconditionally.
Extract the shared RequestAuthInfo -> Open -> WaitToken sequence from the
login flow and the SSH JWT flow into runOAuthFlow. Open is now called
synchronously by both flows, matching iOS; openers must post their UI
work instead of blocking, which the app-side openers already do.
The SSH flow read its login hint via profilemanager.GetLoginHint, which
resolves desktop-layout files that the Android app never writes, so the
hint was always empty and the device-code flow could prompt for account
selection. Both flows now read the hint from the profile account file
via the config path, taken from authSnapshot so a concurrent profile
switch cannot pair one profile's config with another's hint.
The shared table used by the Android and wasm terminals was a strict
subset of the CLI one, leaving Ctrl+U, Ctrl+D, Ctrl+Z and friends
without explicit mappings. Export the full table from the ssh package
and derive both CLI variants from it; Windows adds its console-specific
modes to a copy so the shared map is never mutated.
Extract the dial-then-handshake sequence into nbssh.Handshake, which
applies the context deadline to the socket for the duration of the
handshake. Previously only the Android client did this; the CLI, wasm
and SSH proxy paths could block forever on a peer that accepts the TCP
connection and then goes silent, since ClientConfig.Timeout is not used
by NewClientConn.
Remove Engine.VerifySSHHostKey and keep GetPeerSSHKey as the only SSH
key API on the Engine. Verification now lives in the ssh package as a
PeerKeyLookup func type implementing HostKeyVerifier, shared by the
android and embed clients.
Align Android logout semantics with the desktop UI and CLI: logging out no
longer deletes the stored account email, so the next login passes it as the
OIDC login_hint and the IdP preselects the account. Removing the profile is
now the operation that deletes the email; previously RemoveProfile left the
account file behind, which the fixed-name default profile would have
inherited on recreation.
Extract the identical PTY session setup shared by the wasm and Android
terminal clients into ssh.StartPTYSession, and move the stored-key host
verification onto the engine so the embed client delegates and the
Android client passes the engine directly as HostKeyVerifier.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
English (en) is the source of truth for UI translation keys; the other
nine locales rely on runtime English fallback for any missing key, so a
gap never surfaces in CI. Add a dependency-free Node check that fails
when any locale declared in _index.json does not carry the exact same
key set as en (missing or orphaned keys), wired into a dedicated
UI Translations workflow that runs on locale changes.
Also close the one existing gap the check found: ja was missing
daemon.outdated.download ("Download Latest").
Co-authored-by: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Prepares the repository for the release-branch process agreed internally:
one long-lived release-0.N branch per minor, with fixes backported by
cherry-pick and patch releases tagged from the branch.
Pushes to release-* branches now run the Release workflow and publish
immutable sha-* container images, the way pushes to main already do, so
a release branch can be tested before it is tagged. Release branches
never publish the floating "main" image tag. The push-to-main CI
workflows (Go tests on all platforms, frontend UI, install script,
mobile/wasm validation, infrastructure files, license check) also run
on release-* pushes; pull request triggers were already unfiltered, so
backport PRs were covered — this closes the post-merge gap.
Releases are no longer marked latest before signing: make_latest is
now false in all four goreleaser configs, so a release stays published
but not latest until the signing pipeline uploads the signed Windows
and macOS artifacts and marks it latest itself. Previously the release
became GitHub's "Latest release" at publish time, and the download
endpoints that resolve through the latest-release API could serve a
release whose signed installers did not exist yet. prerelease: auto
additionally labels rc tags as prereleases, so a release candidate can
never take the latest slot.
The trigger_sync_tag job is removed: it dispatched a downstream
image build on every v* tag (release candidates included), which would
race the deliberate release-branch build on every release. The android
and ios submodule bumps are unchanged.
Also sets perennial-regex = "^release-" so git-town never syncs or
ships a release branch into main.
The NSIS installer deleted HKLM/HKCU CurrentVersion\Run values it never
writes, which matches common AV heuristics for unwanted Run-key
manipulation and is suspected to contribute to Windows Defender and
third-party antivirus false positives on the installer.
Drop all autostart registry deletions from both the install and
uninstall sections so the installer only touches keys it creates
itself. Cleanup of the legacy machine-wide entry written by old
installers is left to documentation.
Extends the approach of the closed PR #6735, which only removed the
per-user deletion on uninstall.
e2e/harness documents itself as feature-agnostic, but three details
assumed the caller lives in this repo, so the terraform provider's
acceptance suite would otherwise carry a second harness for the same
product.
repoRoot took the first module root above the working directory as the
Docker build context, which from another module is the caller's own
root, with no combined/Dockerfile.multistage in it. It now requires that
ancestor to be this module, and otherwise asks the go tool for the
source: for a dependent, the extracted directory of the version it pins,
so the server matches the client library it was compiled against. That
lookup uses -mod=readonly, since automatic vendor mode otherwise reports
an empty Dir.
Geolocation was disabled unconditionally. Agent-network ingest does not
use it, but location-based posture checks need the database, and a rule
management cannot evaluate fails rather than passing.
StartClient pinned one network alias and set no hostname, so a second
agent could not start and a peer's name was arbitrary. Management
records that hostname, making it the peer's name in the API.
The client entrypoint is copied with an explicit mode: git tracks it
100755, but the module cache extracts 0444, so a dependent's build
produced a container exiting with "permission denied".
Adds CombinedOption, WithGeolocation, WithServerEnv, ClientOption and
WithClientName.
- Align default names and reuse same environment variables
- With the uploads now targeting the same stable/yum paths as the GTK4
packages, two packages named netbird-ui with the same version and arch
would collide in the repo indexes. Give the GTK3 variant its own
package name and mark the two as conflicting alternatives.
---------
Co-authored-by: Zoltan Papp <zoltan.pmail@gmail.com>
Regular (non-NetBird) servers used InsecureIgnoreHostKey while also
offering the user's password, so an impersonating endpoint could collect
it. Replace that with a per-profile known-hosts store: an unknown host
returns a marker carrying the fingerprint so the client can show it and,
once confirmed, retry with the key trusted and persisted; a changed key
is rejected outright, as OpenSSH does. The confirmation is single-use and
cleared once the key is stored.
The server-type switch now handles the regular case explicitly and
rejects unknown types instead of routing them through the unverified
path. Java sets the store path (per profile, since an overlay IP is a
different host under a different profile) and can drop a host's key once
no session targets it.
DialContext limited only the TCP establishment, so a peer that accepted
the connection and then stayed silent left gossh.NewClientConn blocking
forever and the terminal stuck on "Connecting".
Set the socket deadline from the dial context before the handshake and
clear it on success, so the handshake shares the dial timeout instead of
being able to hang. Verified against a silent listener: the connect now
returns i/o timeout instead of blocking.
Any authentication failure on a regular server returned the
password-required marker, so against a server with password
authentication disabled the client asked again after every attempt and
reported each one as a wrong password.
gossh only lists a method under "attempted methods" when the server
offered it. When a supplied password never got attempted, surface the
real error instead of the marker, the same way the desktop client
reports it. A first connect without a password still prompts.
Zoltan Papp