* [client] Do not move an HA route on latency before both peers have a sample
A direct connection reports no latency until the first sample of its new ICE
agent, and a drop to relay clears the previous one. Route selection ranked
such a peer at unknownLatency, so a routing peer whose direct connection came
back within the relayed switch delay lost the route to an equivalent peer on
a "lower latency" switch right after recovering, resetting every masqueraded
flow the delay was meant to keep alive. The sample usually lands before the
evaluation, but nothing orders the two, and a pair with no round trip time
yet postpones it to the next sampling tick.
Latency-only switches now require a sample on both peers. Categorical
criteria (connected, metric, direct versus relayed) are unaffected.
* [client] Hold a never-direct HA routing peer before a direct peer takes over
The peers of an HA group come up over relay first and turn direct one after
the other, as when lazy connections wake the group or the client reconnects.
A routing peer that was relayed when it carried the route gave way at once
to the first equivalent peer that turned direct, so in a group of N peers
the route moved right after the session started in roughly (N-1)/N of the
cases, resetting every masqueraded flow, typically an SSH session opened on
the wake-up traffic.
Such a peer is now kept for the relayedSwitch delay, counted from the first
evaluation that finds a direct contender. If it turns direct within the
delay the route stays; otherwise it moves when the delay runs out, so the
route does not stay on a relay for longer than the delay. A peer that
dropped from direct keeps counting from the drop.
* [client] Keep allowed IPs when only the chosen routing peer's status changes
recalculateRoutes did not tell a status change of the chosen routing peer
(idle to connected when traffic wakes it, connected to relayed and back) from
a switch to another peer: it removed the allowed IPs and added them back on
the same peer. In between the prefix had no owner and packets for it were
dropped, and default routes published a spurious "disconnected due to high
availability change" event followed by two "connected" ones.
When the same route stays on the same peer with the same definition, only
the recorded status is updated now.
* [client] Limit the "never" relayed switch policy to peers that dropped from direct
NB_HA_RELAYED_SWITCH_DELAY=never keeps a routing peer whose direct
connection dropped to relay for as long as it stays connected. Once the
relayed delay also covered peers that were never direct, "never" pinned
those to the relay for good, although a direct equivalent was available
and the peer showed no sign of turning direct.
A peer that was never direct now uses the default delay under "never",
which keeps the policy's original scope.
* [client] Merge the unchanged-route checks of the HA route watcher
shouldSkipRecalculation and the status-only fast path in recalculateRoutes
both handled the same route staying on the same routing peer, one for an
unchanged status and one for a changed one. They are now a single
keepChosenRoute check.
Pure refactor, no behavior change.
* [client] Re-apply routed allowed IPs when a kept routing peer connects
A peer update can recreate a routing peer: modifyPeers removes it from the
interface, which drops its routed prefixes, and adds it back idle with its
overlay addresses only. The remove and re-add that recalculateRoutes used
to run on every status change of the chosen peer put the prefixes back as
a side effect once the peer connected. Without it, a watcher that sees the
same peer go idle and then connected leaves the routed subnet without an
owner until a route update or an HA switch.
When the chosen peer connects while keeping the route, the watcher now
re-applies its routed allowed IPs through the route manager's reconcile,
which is add-only and idempotent. Lazy connections already do the same when
they arm an idle peer.
* [client] Bound the HA route hold on a routing peer without a latency sample
A latency-only switch waited for a sample on both peers. If the current
peer never got one, because its candidate pair stats kept failing or
reporting no round trip time, it kept the route indefinitely against a
measured peer, however much faster that one was.
The hold on an unsampled current peer now lasts unmeasuredLatencyHold
(30s), long enough for a recovered direct connection to report its first
sample. After that the peer is ranked at unknownLatency again and the usual
switch margins apply. relayedHold is armed so the switch is reconsidered
when the hold runs out.
* [client] Restart the relayed delay of a never-direct peer when its contender goes
For a routing peer that was never direct, the relayed delay runs from the
first evaluation that finds a direct contender. It was only reset when the
current peer changed or turned direct, so if that contender went away and
another one showed up later, the delay counted from the first one and the
new contender took over at once.
The delay of such a peer now restarts once no direct contender is left.
The delay of a peer that dropped from direct keeps running from the drop.
* [client] Retrigger pull request synchronization
* [client] Retry a failed routed allowed IPs reconcile on the next evaluation
keepChosenRoute recorded the connected status before re-applying the routed
allowed IPs and only logged a failed reconcile. Later evaluations then saw
an unchanged status and never retried, so a transient AddAllowedIP failure
left the recreated routing peer without its routed prefixes until another
status transition or a route switch.
The status is now recorded only once the reconcile succeeds. A failure
leaves the previous status in place, so the next evaluation, at the latest
the periodic re-evaluation, sees the change again and retries.
Android 16+ local network protection derives the blocked prefixes from the interface address prefix. A /16 address turns the whole overlay into a local network, so apps without ACCESS_LOCAL_NETWORK cannot reach any peer. Pass the address as /32 and /128 and add the overlay networks to the route list that the Android side turns into VPN routes, on both the initial create and the renew path.
## Describe your changes
Pull fresh TUN settings on Android rebuild instead of push
The Android TUN rebuild consumed state pushed through notifications and
a Java-side snapshot, and both sources were unreliable. The DNS
search-domain notifier fired OnNetworkChanged with an empty string,
which the rebuild handler treated as the new route list, so any search
domain change rebuilt the TUN with zero routes and cut all tunnel
traffic. The rebuild also reused the search domains cached at the last
establish, so search domain updates never reached the TUN at runtime.
Make the notification a pure trigger and let the Java side pull a fresh
snapshot instead. Expose GetTunSettings on the Android SDK client: it
returns the current TUN route ranges, derived on demand by the route
manager from the client routes, the exit-node selection and the fake IP
blocks, together with the DNS search domains. The route notifier keeps
only its last-announced baseline to suppress triggers for unchanged
syncs; the TUN route state is owned by the route manager. SearchDomains
now locks the DNS server mutex since the pull arrives from a Java
thread.
Requires the matching android-client change that switches recreateTUN to
the pull API.
## Issue ticket number and link
## Stack
<!-- branch-stack -->
### Checklist
- [x] Is it a bug fix
- [ ] Is a typo/documentation fix
- [ ] Is a feature enhancement
- [ ] It is a refactor
- [ ] Created tests that fail without the change (if possible)
- [ ] This change does **not** modify the public API, gRPC protocols,
functionality behavior, CLI / service flags, or introduce a new feature
— **OR** I have discussed it with the NetBird team beforehand (link the
issue / Slack thread in the description). See
[CONTRIBUTING.md](https://github.com/netbirdio/netbird/blob/main/CONTRIBUTING.md#discuss-changes-with-the-netbird-team-first).
> By submitting this pull request, you confirm that you have read and
agree to the terms of the [Contributor License
Agreement](https://github.com/netbirdio/netbird/blob/main/CONTRIBUTOR_LICENSE_AGREEMENT.md).
## Documentation
Select exactly one:
- [ ] I added/updated documentation for this change
- [x] Documentation is **not needed** for this change (explain why)
### Docs PR URL (required if "docs added" is checked)
Paste the PR link from https://github.com/netbirdio/docs here:
https://github.com/netbirdio/docs/pull/__
<!-- This is an auto-generated comment: release notes by coderabbit.ai
-->
## Summary by CodeRabbit
- **New Features**
- Added access to current TUN route ranges and DNS search domains.
- TUN settings are returned in a mobile-friendly format for easier
integration.
- **Improvements**
- Route changes are detected and synchronized more reliably.
- Current routing information now reflects active routes, including
supported fake-IP ranges.
- Simplified network initialization for more consistent startup
behavior.
- **API Changes**
- Removed the obsolete network-map retrieval method from the management
client interface.
<!-- end of auto-generated comment: release notes by coderabbit.ai -->
The fake IP manager was only created at route manager construction, from the DNS feature flag fetched by the initial GetNetworkMap call. When the flag flipped to true mid-session, UpdateRoutes set useNewDNSRoute but never created the manager, so domain routes added after the flip got a DNS interceptor with a nil fake IP manager.
internalDnatFw only checked for a firewall and GOOS, so the interceptor took the DNAT path and called GetFakeIP/AllocateFakeIP on the nil *fakeip.Manager. These methods lock m.mu first, which is a nil pointer dereference: the first DNS answer for such a route panicked and crashed the VPN service. The fake IP blocks (240.0.0.0/8 and its v6 pair) also never reached the TUN, since only the constructor registered them.
Create the manager and its TUN routes from UpdateRoutes when the flag turns on, notify so the fake IP blocks get into the TUN without a client route change, and treat a nil manager as no internal DNAT.
This is groundwork for removing the initial GetNetworkMap fetch, after which every startup goes through the flag-off-to-on transition.
## Describe your changes
Under lazy connections, when a routing peer goes idle its WireGuard peer
is torn down and re-created with a wake endpoint by
the activity listener, carrying only the overlay /32
(`peerCfg.AllowedIPs`). The routed subnet prefixes are dropped from
the device on the Connected→Idle transition.
They are meant to be restored by the route watcher, which reacts to the
peer's status change and calls `recalculateRoutes` →
`AddAllowedIP`. Two things prevent that from healing the peer:
- `AddAllowedIP` uses `update_only`, which is a silent no-op (no error)
when the peer does not exist. While the peer is
being torn down and re-armed with its wake endpoint, it is briefly
absent, so a re-add that lands in that window is lost.
- The allowed-IP refcounter only calls its add function on a prefix's
0→1 transition. The routed prefix stays referenced
across the idle cycle, so once the device entry is gone the refcounter
does not re-push it on its own, and nothing retries.
As a result, traffic to the routed subnet is black-holed while the peer
is idle. Because the wake endpoint only fires when a
packet matches the peer's AllowedIPs, a packet to the subnet is dropped
before reaching the wake endpoint, so it cannot
wake the peer. The peer only recovers when woken by other means (e.g. a
ping to its overlay IP).
## Approach
This change keeps the existing Connected→Idle transition as-is and
reconciles the AllowedIPs afterwards, avoiding any
additional locking on the transition path. The peer is torn down and
re-armed with its wake endpoint as today; the routed
prefixes are then re-applied from the route manager's allowed-IP
refcounter once the wake endpoint has been (re)armed.
A single add-only method, `ReconcilePeerAllowedIPs(peerKey)`, re-applies
every routed prefix currently tracked for the peer
in the refcounter (the authoritative store; it already covers static,
dynamic and dnsinterceptor routes). It runs whenever
the peer's wake endpoint is (re)created in the lazy manager — every
point where the activity listener builds it with the
overlay /32 only:
- **initial registration** (`AddPeer`, cold start): the route manager
may have already pushed the peer's routes before the
wake endpoint existed, so those `AddAllowedIP` calls no-op'd; the
reconcile installs them on the freshly created wake
endpoint.
- **the two paths into idle** (`DeactivatePeer` on a remote GOAWAY,
`onPeerInactivityTimedOut` on local inactivity): the
peer is torn down and re-armed, so the routed prefixes must be
re-applied.
In every case the routed prefixes end up on the wake endpoint, so
traffic to a routed subnet can wake the peer. Arming the
wake endpoint and reconciling are wrapped in a single
`armActivityListener` helper so the two always happen together.
New helper: `refcounter.Counter.KeysMatching(pred)` to enumerate a
peer's prefixes under the counter lock.
Note on scope: the reconcile restores what the refcounter tracks. All
routed AllowedIPs currently go through it, so this
covers the routed-prefix case; it does not attempt to reconcile
AllowedIPs installed outside the refcounter. The
Idle→Connected (wake) path does not need this: the peer is not removed
there (the listener close leaves it in place and only
the endpoint is updated), so a concurrent `AddAllowedIP` lands normally.
## Testing
Reproduced deterministically in a local dev setup (userspace client,
`NB_WG_KERNEL_DISABLED=true`, `B_LAZY_CONN_INACTIVITY_THRESHOLD=1`
inactivity threshold 1
min). A temporary 30s sleep in the tear-down → re-arm window widens the
race so the route watcher's async `AddAllowedIP`
reliably lands while the peer is absent and no-ops (the sleep is a test
aid, not part of the change):
- **without the reconcile:** after the peer goes idle, a ping to any
routed IP — both a pre-existing route and one added
during the window — black-holes; the peer never wakes.
- **with the reconcile:** the same ping wakes the peer and passes.
Added unit tests: `ReconcilePeerAllowedIPs` (re-applies all of a peer's
tracked prefixes, scoped to that peer) and
`refcounter.Counter.KeysMatching`.
Note: `netbird status -d` is not a reliable signal for this —
`AddPeerStateRoute` records the route regardless of whether
the underlying `AddAllowedIP` no-op'd, so it reflects the route
manager's intent rather than device state. The reliable
signal is functional (ping the subnet from idle).
## Checklist
- [x] Is it a bug fix
- [ ] Is a typo/documentation fix
- [ ] Is a feature enhancement
- [ ] It is a refactor
- [x] Created tests that fail without the change (unit tests for the
reconcile + `KeysMatching`)
## Documentation
- [x] Documentation is **not needed** for this change (internal client
behavior, no API / gRPC / CLI / flag change)
<!-- codesmith:footer -->
---
<a
href="https://app.blacksmith.sh/netbirdio/codesmith/netbird/pr/6863"><picture><source
media="(prefers-color-scheme: dark)"
srcset="https://pr-comments-assets.blacksmith.sh/codesmith/view-with-codesmith-dark-v2.svg"><source
media="(prefers-color-scheme: light)"
srcset="https://pr-comments-assets.blacksmith.sh/codesmith/view-with-codesmith-light-v2.svg"><img
alt="View with Codesmith"
src="https://pr-comments-assets.blacksmith.sh/codesmith/view-with-codesmith-dark-v2.svg"></picture></a>
<a
href="https://backend.blacksmith.sh/track/enable-autofix?expires=1787330960&installation_model_id=427504&pr_number=6863&repository=netbirdio%2Fnetbird&return_to=https%3A%2F%2Fgithub.com%2Fnetbirdio%2Fnetbird%2Fpull%2F6863&signature=f3d6a97d7db82e92b3939fdd0f159c5ee74913ff88f4eb82e41e88fcb787aff4"><picture><source
media="(prefers-color-scheme: dark)"
srcset="https://pr-comments-assets.blacksmith.sh/codesmith/autofix-with-codesmith-dark.svg"><source
media="(prefers-color-scheme: light)"
srcset="https://pr-comments-assets.blacksmith.sh/codesmith/autofix-with-codesmith-light.svg"><img
alt="Autofix with Codesmith"
src="https://pr-comments-assets.blacksmith.sh/codesmith/autofix-with-codesmith-dark.svg"></picture></a>
<sup>Need help on this PR? Tag <code>/codesmith</code> with what you
need. Autofix is disabled.</sup>
<!-- codesmith:autofix:disabled -->
<!-- /codesmith:footer -->
<!-- This is an auto-generated comment: release notes by coderabbit.ai
-->
## Summary by CodeRabbit
* **Bug Fixes**
* Routed IP assignments are automatically reconciled and restored
whenever a peer’s lazy wake endpoint is armed or re-armed.
* Routed allowed IPs are re-applied after inactivity transitions and
monitoring re-initialization.
* If reconciliation can’t be performed, the client safely skips it; if
reconciliation encounters issues, failures are logged without stopping
connection monitoring.
<!-- end of auto-generated comment: release notes by coderabbit.ai -->
- **Wails v3 application** (`client/ui`) with a React + TypeScript + Tailwind frontend replacing the Fyne UI: main connection view, exit-node switcher, networks/peers browser with detail panels, profile management, settings (general, network, SSH, security, troubleshooting, appearance), debug-bundle creation, and a first-run welcome flow.
- **Internationalization**: go-i18n bundle with 9 locales (en, de, es, fr, hu, it, pt, ru, zh-CN) shared between the tray and the frontend.
- **New system tray** implementation with per-platform theme-aware icons, including a native XEmbed host for Linux (`xembed_tray_linux.c`) and a Linux theme watcher.
- **Session handling**: auth session watcher (`client/internal/auth/sessionwatch`), pending login flow, session-expiration dialog and tray notifications, and `netbird login` improvements.
- **Daemon API extensions** (`daemon.proto`): status stream subscription, event stream, networks/exit-node selection endpoints, and richer full status — with probe throttling on the daemon side to protect against UI-driven request storms.
- **UI preferences store** persisted per profile, autostart management via the daemon (single source of truth in HKCU on Windows).
- **Build system**: Taskfile-based builds per platform (macOS, Linux, Windows), Docker cross-compilation images, MSIX/NSIS/nfpm/AppImage packaging, and a new `frontend-ui` CI workflow.
Co-authored-by: Zoltan Papp <zoltan.pmail@gmail.com>
Co-authored-by: Eduard Gert <kontakt@eduardgert.de>
Co-authored-by: braginini <bangvalo@gmail.com>
Co-authored-by: Pascal Fischer <32096965+pascal-fischer@users.noreply.github.com>
Co-authored-by: riccardom <riccardomanfrin@gmail.com>
* routemanager: enforce a single selected exit node
Backport of the exit-node exclusivity reconcile from the 0.75.0 line
(upstream commit 966fbec11) onto v0.74.0. Exit nodes are mutually
exclusive, but the RouteSelector stores routes with default-on semantics,
so every available exit node reported as selected at once.
Reconcile exit-node selection on each network map: keep at most one
selected -- the user's persisted pick, else whatever management marks for
auto-apply (SkipAutoApply=false), else none. Never auto-activate an exit
node the map does not request.
Carries over only the manager/routeselector logic and its test; the
desktop-only client/server changes and the BumpNetworksRevision UI-push
feature from the original commit are intentionally excluded.
* routeselector: make exit-node reconciliation atomic
enforceSingleExitNode took the RouteSelector lock three separate times
(IsDeselectAll, then DeselectRoutes, then SelectRoutes), so a concurrent
DeselectAllRoutes could interleave and be silently undone: SelectRoutes on
its deselectAll branch clears the flag and re-selects the preferred exit
node, overriding the user's "all off".
Move the whole reconciliation into a single locked RouteSelector method
(SetExclusiveExitNode) that checks deselectAll inside the critical section,
so a deselect-all either fully precedes the reconcile (left untouched) or
fully follows it (honoured). No interleaving is possible.
* [client] fix iOS route-update reordering that black-holed IPv6 on exit-node disable
On iOS the route notifier delivered each prefix update from its own
fire-and-forget goroutine (notify -> `go func`), so Go provided no ordering
guarantee between consecutive updates. It also read currentPrefixes inside
that goroutine without holding the lock, racing the next OnNewPrefixes write.
On exit-node disable the core removes the default routes as two separate
prefix updates (0.0.0.0/0, then the synthesized ::/0). When the two
goroutines were reordered, the stale snapshot still containing ::/0 was
delivered last and clobbered the correct default-free one. iOS then kept the
::/0 default route on the tunnel with no exit node to carry it, black-holing
all IPv6 traffic while IPv4 recovered correctly.
Fix: deliver updates through a single worker goroutine fed by a buffered
channel, preserving production order, and snapshot the joined prefix string
under the mutex so it can't race a concurrent update. Buffered so producers
(which run under the route manager lock) don't block on the listener callback.
* [client] close iOS notifier delivery goroutine on Stop, unbounded queue
The delivery goroutine was never stopped, leaking on every engine
restart. Add Notifier.Close, called from the route manager Stop after
routing cleanup.
Replace the buffered update channel with a cond-driven linked-list
queue so route-update producers (running under the route manager lock)
never block when the listener callback is slow.
* [client] propagate exit-node deselect to synthesized v6 (::/0) route
When a client deselects an IPv4 exit node, the auto-generated IPv6 default
route (::/0) was still selected and pushed onto the tunnel interface, even
though the user disabled the exit node. On an exit node without a real IPv6
egress this blackholes IPv6 traffic, and because clients prefer IPv6 (happy
eyeballs) it can break general connectivity.
Root cause: the synthesized v6 route gets a different NetID than its v4 base
(base + "-v6"). The route selector keys deselects by NetID and defaults
unknown NetIDs to selected, so the "-v6" entry was never matched by the v4
deselect. The effectiveNetID() mirror that solves exactly this is used by
HasUserSelectionForRoute and FilterSelectedExitNodes, but categorizeUserSelection
called the raw IsSelected(), bypassing it and mis-categorizing the v6 pair as
user-selected.
Add RouteSelector.IsSelectedForExitNode(), which applies effectiveNetID before
the selection check, and use it in categorizeUserSelection. IsSelected() is left
untouched so non-exit code paths don't make unrelated "*-v6" routes inherit v4
state. Adds regression tests for the v4/v6 deselect mirror and explicit-v6
override.
* [client] add DIAG logging to trace exit-node v6 (::/0) route filtering
Temporary diagnostics to find why a deselected v4 exit node's synthesized
::/0 route still reaches the tunnel. Logs the full install path: incoming
client networks, route-selector state before/after the management-driven
update, what updateExitNodeSelections deselects/selects, and per-route
KEEP/SKIP/DROP decisions in FilterSelectedExitNodes and applyExitNodeFilter.
To be reverted once the real root cause is confirmed from a client log.
* [client] clear orphaned v6 exit selection when v4 pair is toggled
Root cause of the leaking ::/0 route, confirmed from client logs: the
synthesized "-v6" exit route could stay explicitly selected in the persisted
route-selector state while its v4 base was deselected (selected=[...-v6],
deselected=[...v4base]). Because the v6 entry then has its own explicit state,
effectiveNetID stops mirroring the v4 base, so FilterSelectedExitNodes keeps
::/0 and it is installed on the tunnel even though the user disabled the exit
node. This happened because the iOS SDK's deselect only pairs the "-v6" sibling
via ExpandV6ExitPairs when the v6 route is present in the current routesMap; a
deselect at a moment it wasn't expanded left the v6 selection orphaned.
Fix at the selector write path so it is independent of routesMap timing: when a
v4 exit NetID is selected or deselected, clear any orphaned explicit state on
its "-v6" sibling (clearPairedV6Locked), unless the sibling is part of the same
batch (the deliberate ExpandV6ExitPairs case). The v6 then falls back to
inheriting the v4 base via effectiveNetID, so a v4 deselect also drops ::/0 and
a v4 select brings both back.
Adds regression tests: a stale explicit v6 selection is cleared by a later v4
deselect, and an explicit v6 select made in the same batch is preserved.
* [ios] compute route connection status in the bridge
The iOS bridge exposed a route's Network as a possibly comma-joined string
("0.0.0.0/0, ::/0" for a merged exit node) but no connection status, forcing
the UI to infer status by string-matching that joined value against peer
routes — which never matched for the merged exit node, leaving it stuck as
not-connected. Android already computes status in the core (findBestRoutePeer).
Mirror that here: add a Status field to RoutesSelectionInfo and compute it from
the connected peers' route tables, matching the route's primary prefix, a merged
exit node's extra v6 prefix, or a dynamic route's domain pattern (the key the
route manager records). The UI can now read the status directly.
* [client] remove exit-node v6 DIAG logging and tidy routeselector
Drop the temporary DIAG diagnostics added to trace the leaking ::/0 route
(the root cause is fixed and confirmed). Also reorganize routeselector.go so
the exit-node helpers (clearPairedV6Locked, isExitNode) sit next to the
exit-node code paths and MarshalJSON/UnmarshalJSON are grouped together.
* [client] mirror v4 exit selection onto v6 pair at write time
The synthesized "-v6" exit route shares its v4 base's NetID plus a "-v6"
suffix. Selection state was reconciled at read time via effectiveNetID, a
mirror that could only be applied on exit-node code paths, which forced a
parallel IsSelectedForExitNode() alongside IsSelected() and a clearPairedV6Locked()
orphan cleanup on every toggle. That machinery still missed the case observed
in the field: a persisted state with the v4 base deselected but its "-v6"
sibling explicitly selected (orphaned). Because effectiveNetID returns the v6
entry itself once it carries explicit state, and clearPairedV6Locked only fires
on a live toggle, the loaded orphan survived and the ::/0 route leaked onto the
tunnel despite the exit node being disabled, breaking IPv6 (happy eyeballs).
Treat the v4/v6 exit pair as a single toggle and keep state consistent at write
time instead. RouteSelector.SyncPairedSelection forces the "-v6" entry to match
its v4 base unconditionally, resetting any orphaned explicit state. The route
manager, which knows the route prefixes, computes the pairs (V6ExitMergeSet) and
calls it from updateRouteSelectorFromManagement before selection is read, so both
collectExitNodeInfo and FilterSelectedExitNodes see consistent state, including
pairs loaded from persisted selector state.
This removes effectiveNetID, IsSelectedForExitNode and clearPairedV6Locked; the
selector is literal again and no longer needs the "exit-node paths only" caveat.
HasUserSelectionForRoute and applyExitNodeFilter use the raw NetID.
Adds a selector test for SyncPairedSelection (including the orphaned-v6 case) and
a route-manager test reproducing the persisted-orphan scenario from the field log.
* [client] add DIAG logging to trace v6 exit-pair mirror
The write-time mirror did not eliminate the leak in field testing. Re-add the
DIAG diagnostics around the exit-node selection flow to capture a fresh trace:
- UpdateRoutes: incoming client networks, selector state before/after the
management update, and the networks remaining after FilterSelectedExitNodes.
- mirrorV6ExitPairSelections: the NetIDs present in this update and the v6 pairs
V6ExitMergeSet derives from them (reveals whether the v4 base and its ::/0 pair
are present in the same update so the pair can be matched).
- SyncPairedSelection: the base/paired state before and after the sync.
- FilterSelectedExitNodes / applyExitNodeFilter: per-route SKIP/KEEP/DROP and the
selection lookups behind each decision.
- updateExitNodeSelections / logExitNodeUpdate: categorization and deselect set.
Temporary; to be removed once the root cause is confirmed.
* [client] remove v6 exit-pair mirror DIAG logging
Drop the temporary DIAG diagnostics added to trace the v4/v6 exit-pair mirror.
The field log confirmed the write-time mirror keeps the pair consistent (the
::/0 route is only ever applied alongside its v4 base and is dropped on deselect),
so the diagnostics are no longer needed.
extraInitialRoutes() was meant to preserve only the fake IP route
(240.0.0.0/8) across TUN rebuilds, but it re-injected any initial
route missing from the current set. When the management server
advertised exit node routes (0.0.0.0/0) that were later filtered
by the route selector, extraInitialRoutes() re-added them, causing
the Android VPN to capture all traffic with no peer to handle it.
Store the fake IP route explicitly and append only that in notify(),
removing the overly broad initial route diffing.
- DNS resolution broke after deselecting an exit node because the route checker used all client routes (including deselected ones) to decide how to forward upstream DNS
queries
- Added GetSelectedClientRoutes() to the route manager that filters out deselected exit nodes, and switched the DNS route checker to use it
- Confirmed fix via device testing: after deselecting exit node, DNS queries now correctly use a regular network socket instead of binding to the utun interface
* Optimize Windows DNS performance with domain batching and batch mode
Implement two-layer optimization to reduce Windows NRPT registry operations:
1. Domain Batching (host_windows.go):
- Batch domains per NRPT
- Reduces NRPT rules by ~97% (e.g., 184 domains: 184 rules → 4 rules)
- Modified addDNSMatchPolicy() to create batched NRPT entries
- Added comprehensive tests in host_windows_test.go
2. Batch Mode (server.go):
- Added BeginBatch/EndBatch methods to defer DNS updates
- Modified RegisterHandler/DeregisterHandler to skip applyHostConfig in batch mode
- Protected all applyHostConfig() calls with batch mode checks
- Updated route manager to wrap route operations with batch calls
* Update tests
* Fix log line
* Fix NRPT rule index to ensure cleanup covers partially created rules
* Ensure NRPT entry count updates even on errors to improve cleanup reliability
* Switch DNS batch mode logging from Info to Debug level
* Fix batch mode to not suppress critical DNS config updates
Batch mode should only defer applyHostConfig() for RegisterHandler/
DeregisterHandler operations. Management updates and upstream nameserver
failures (deactivate/reactivate callbacks) need immediate DNS config
updates regardless of batch mode to ensure timely failover.
Without this fix, if a nameserver goes down during a route update,
the system DNS config won't be updated until EndBatch(), potentially
delaying failover by several seconds.
Or if you prefer a shorter version:
Fix batch mode to allow immediate DNS updates for critical paths
Batch mode now only affects RegisterHandler/DeregisterHandler.
Management updates and nameserver failures always trigger immediate
DNS config updates to ensure timely failover.
* Add DNS batch cancellation to rollback partial changes on errors
Introduces CancelBatch() method to the DNS server interface to handle error
scenarios during batch operations. When route updates fail partway through, the DNS
server can now discard accumulated changes instead of applying partial state. This
prevents leaving the DNS configuration in an inconsistent state when route manager
operations encounter errors.
The changes add error-aware batch handling to prevent partial DNS configuration
updates when route operations fail, which improves system reliability.
Avoid repeated conversions during route setup. The toInterface helper ensures
the conversion happens only once regardless of how many routes are added
or removed.
- Move `util/grpc` and `util/net` to `client` so `internal` packages can be accessed
- Add methods to return the next best interface after the NetBird interface.
- Use `IP_UNICAST_IF` sock opt to force the outgoing interface for the NetBird `net.Dialer` and `net.ListenerConfig` to avoid routing loops. The interface is picked by the new route lookup method.
- Some refactoring to avoid import cycles
- Old behavior is available through `NB_USE_LEGACY_ROUTING=true` env var
This update adds new relay integration for NetBird clients. The new relay is based on web sockets and listens on a single port.
- Adds new relay implementation with websocket with single port relaying mechanism
- refactor peer connection logic, allowing upgrade and downgrade from/to P2P connection
- peer connections are faster since it connects first to relay and then upgrades to P2P
- maintains compatibility with old clients by not using the new relay
- updates infrastructure scripts with new relay service
Riccardo Manfrin
