* Ensure route settlement on iOS before handling DNS responses to prevent bypassing the tunnel.
* add more logs
* rollback debug changes
* rollback changes
* [client] Improve logging and add comments for iOS route settlement logic
- Switch iOS route settlement log level from Debug to Trace for finer control.
- Add clarifying comments for `waitForRouteSettlement` on non-iOS platforms.
---------
Co-authored-by: mlsmaycon <mlsmaycon@gmail.com>
- Add WireguardPort option to embed.Options for custom port configuration
- Fix KernelInterface detection to account for netstack mode
- Skip SSH config updates when running in netstack mode
- Skip interface removal wait when running in netstack mode
- Use BindListener for netstack to avoid port conflicts on same host
* [client] Add WGConfigurer interface
To allow Rosenpass to work both with kernel
WireGuard via wgctrl (default behavior) and
userspace WireGuard via IPC on Android/iOS
using WGUSPConfigurer
* [client] Remove Rosenpass debug logs
* [client] Return simpler peer configuration in outputKey method
ConfigureDevice, the method previously used in
outputKey via wgClient to update the device's
properties, is now defined in the WGConfigurer
interface and implemented both in kernel_unix and
usp configurers.
PresharedKey datatype was also changed from
boolean to [32]byte to compare it
to the original NetBird PSK, so that Rosenpass
may replace it with its own when necessary.
* [client] Remove unused field
* [client] Replace usage of WGConfigurer
Replaced with preshared key setter interface,
which only defines a method to set / update the preshared key.
Logic has been migrated from rosenpass/netbird_handler to client/iface.
* [client] Use same default peer keepalive value when setting preshared keys
* [client] Store PresharedKeySetter iface in rosenpass manager
To avoid no-op if SetInterface is called before generateConfig
* [client] Add mutex usage in rosenpass netbird handler
* [client] change implementation setting Rosenpass preshared key
Instead of providing a method to configure a device (device/interface.go),
it forwards the new parameters to the configurer (either
kernel_unix.go / usp.go).
This removes dependency on reading FullStats, and makes use of a common
method (buildPresharedKeyConfig in configurer/common.go) to build a
minimal WG config that only sets/updates the PSK.
netbird_handler.go now keeps s list of initializedPeers to choose whether
to set the value of "UpdateOnly" when calling iface.SetPresharedKey.
* [client] Address possible race condition
Between outputKey calls and peer removal; it
checks again if the peer still exists in the
peers map before inserting it in the
initializedPeers map.
* [client] Add psk Rosenpass-initialized check
On client/internal/peer/conn.go, the presharedKey
function would always return the current key
set in wgConfig.presharedKey.
This would eventually overwrite a key set
by Rosenpass if the feature is active.
The purpose here is to set a handler that will
check if a given peer has its psk initialized
by Rosenpass to skip updating the psk
via updatePeer (since it calls presharedKey
method in conn.go).
* Add missing updateOnly flag setup for usp peers
* Change common.go buildPresharedKeyConfig signature
PeerKey datatype changed from string to
wgTypes.Key. Callers are responsible for parsing
a peer key with string datatype.
* Fix engine shutdown deadlock and message handling races
- Release syncMsgMux before waiting for shutdownWg to prevent deadlock
- Check context inside lock in handleSync and receiveSignalEvents
- Prevents nil pointer access when messages arrive during engine stop
Two new boolean flags, SearchDomainDisabled and SkipPTRProcess, are added to CustomZone and its protobuf; they are propagated through the engine to DNS host logic. Host matching now uses SearchDomainDisabled directly, and PTR collection skips zones with SkipPTRProcess; reverse zones are initialized with SearchDomainDisabled: true.
The status cmd will not be blocked by the ICE probe
Refactor the TURN and STUN probe, and cache the results. The NetBird status command will indicate a "checking…" state.
- Port dnat changes from https://github.com/netbirdio/netbird/pull/4015 (nftables/iptables/userspace)
- For userspace: rewrite the original port to the target port
- Remember original destination port in conntrack
- Rewrite the source port back to the original port for replies
- Redirect incoming port 5353 to 22054 (tcp/udp)
- Revert port changes based on the network map received from management
- Adjust tracer to show NAT stages
makes the DNS forwarder port configurable in the management and client components, while changing the well-known port from 5454 to 22054. The change includes version-aware port assignment to ensure backward compatibility.
- Adds a configurable `ForwarderPort` field to the DNS configuration protocol
- Implements version-based port computation that returns the new port (22054) only when all peers support version 0.59.0 or newer
- Updates the client to dynamically restart the DNS forwarder when the port changes
- Move `util/grpc` and `util/net` to `client` so `internal` packages can be accessed
- Add methods to return the next best interface after the NetBird interface.
- Use `IP_UNICAST_IF` sock opt to force the outgoing interface for the NetBird `net.Dialer` and `net.ListenerConfig` to avoid routing loops. The interface is picked by the new route lookup method.
- Some refactoring to avoid import cycles
- Old behavior is available through `NB_USE_LEGACY_ROUTING=true` env var
Deduplicate STUN package sending.
Originally, because every peer shared the same UDP address, the library could not distinguish which STUN message was associated with which candidate. As a result, the Pion library responded from all candidates for every STUN message.
In this PR, speed up the GRPC message processing, force the recreation of the ICE agent when getting a new, remote offer (do not wait for local STUN timeout).
