* Run lazy connection manager for rosenpass peers
* Treat forward-target peers as normal lazy connections
* Run Rosenpass in permissive mode on the embedded proxy
* Support per-peer lazy connection state and default proxy peers to lazy
* Classify forward targets from incoming config in lazy exclusion
* Set IsUserspaceBind mock so lazy manager starts in engine test
* Skip lazy exclude reconciliation when the set is unchanged
* Keep cached lazy flag when a sync carries no peer config
The file drop server listened on 41421, which falls inside the ephemeral
port range on Linux (32768-60999) and Windows (49152-65535), so any
outbound connection could take it after boot. The receiver then bound a
dynamic port and advertised it over signaling, and the sender waited for
that advertisement before retrying.
That coupled a data plane feature to signaling traffic: once a peer
connection is established there is no reason for another offer or answer
to go out, so a sender could wait out the grace period for an
advertisement that never came.
Move the port to 22042, next to the SSH (22022) and DNS forwarder (22054)
ports and clear of both ephemeral ranges, and keep the tunnel side fixed
the way SSH does. A receiver that cannot bind it falls back to a dynamic
port and redirects 22042 to it with an inbound DNAT rule, so senders
always dial the well known port and never negotiate. NB_FILEDROP_PORT
overrides the local bind only.
The DNAT runs ahead of the filter on every backend (nftables prerouting
at NAT dest priority, iptables nat/PREROUTING, and the userspace filter's
translate-then-redecode path), so the netstack service registry keeps
taking the bound port.
This drops the port registry, the retry that waited on it, and the
signaling plumbing that fed it.
Android cannot address the user's shared storage by path, so a received
file had to land in app-private storage and be copied out afterwards,
needing twice the space of the transfer.
Put the staging area behind a Sink interface the receiver writes every
payload through. The filesystem spool implements it unchanged and stays
the default; a platform that cannot be addressed by path implements the
gomobile-bound half instead and stages payloads wherever it can reach.
The writer reports its own total rather than returning a written count:
gomobile copies a []byte argument into a fresh Java array and carries no
count back out.
A failed delivery now drops the staged payloads. The filesystem spool
swept them up on its next pass, but a sink holding entries the engine
cannot address by path has no such fallback.
Losing the last network only flipped the availability state: the dead management, signal and relay sockets stayed silently connected until their own timeouts, so the client kept reporting Connected with no network at all.
Introduce client/netevents with a Manager that ties the availability state, the connection sweeper and the status recorder together, and move the netstate and netsweep packages under it (netsweep renamed to sweep). SetNetworkAvailable(false) now also sweeps the registered connections so their owners redial and the listener reaches the NoNetwork state.
The Android and iOS bindings own a Manager instance and inject it through the constructors; consumers hold the concrete *Manager whose nil zero value reports always-online and never sweeps, with interfaces kept only as parameter contracts. The relay guard settle wait moved into the Manager as WaitSettled, removing the netevents import from the relay package.
The updater runs as LocalSystem and started netbird-ui via
CreateProcessAsUser with a nil environment, so the UI inherited the
SYSTEM environment (USERPROFILE, APPDATA pointing at systemprofile)
while running under the user's token. The WebView2-based UI exits
immediately in that state, so the UI never came back after an update.
Build the environment from the user's token with CreateEnvironmentBlock
and pass it to CreateProcessAsUser.
Stop the UI before a silent Windows update and suppress the installer reboot
On silent MSI updates msiexec could reboot the machine on its own. The running UI holds a lock on its own exe, and since msiexec runs as LocalSystem it cannot close the interactive user's UI via Restart Manager, so the MSI scheduled the
file replacement for the next reboot and marked the install restart-required.
Terminate netbird-ui.exe before launching the installer and wait until its image file is released; the existing deferred restart brings it back after the install on every exit path
Run msiexec with /norestart REBOOT=ReallySuppress so it never reboots on its own
Treat exit codes 3010/1641 as success with a warning instead of a failure
---------
Co-authored-by: Viktor Liu <viktor@netbird.io>
* [client] Clear stale installer result before starting update
The installer result file could survive a previous update attempt (e.g.
when the updater wrote it after the restarted daemon already ran its
startup check). A new install attempt left the old file in place, so the
GUI progress window's first GetInstallerResult poll read the outdated
result: a stale success made the GUI quit mid-install, which cancelled
the TriggerUpdate context and aborted the artifact verification; a stale
error surfaced a bogus failure dialog for a succeeding update.
Remove any leftover result file at the start of RunInstallation, before
the download begins, so result watchers only see the current attempt's
outcome.
* [client] Align stale-result warning with log message style
On network changes the client restarted the whole engine. That is heavy-handed and slow: it tears down working state to recover from a transition the engine could handle itself. This replaces the restart with proper network event handling.
Suspend the retry loops while no network is available. Instead of burning through backoff intervals against an unreachable network, the reconnection loops park until the OS reports a usable network again.
Reconnect immediately on a network switch. When the OS hands us a new network, connections bound to the old one are swept and re-dialed right away, rather than waiting for a timeout to notice they are dead.
Adds an SSHClient gomobile binding so the Android app can run an SSH session over the tunnel with a PTY, exposed through a listener interface for the in-app terminal.
Server type is auto-detected from the SSH banner, which selects the auth path: JWT device-code flow, NetBird key, or a regular server (NetBird key first, then password). Host keys are verified against the peer registry for NetBird servers and trust-on-first-use for regular ones.
The receiver reported progress once per file, after the whole body had
been staged: spool.Write drains its reader before returning, so a large
file sat at nothing until it jumped to done. It now stages through a
reader that reports as the bytes land, the same way the sender already
did, and both sides thin their reports to one per percent and one per
200ms so a fast transfer cannot flood the history or the UI.
Progress also becomes an event of its own. It was left out because a
report per byte would have been unusable; thinned, it costs a handful of
events a second and spares every UI a poll. The daemon's event bridge
ignores the new kind, so nothing is published where a notification would
be noise.
Withdrawing consent mid-transfer did nothing. Cancel routed through
Decide, which only moves an offer out of Pending, so an accepted offer
kept its decision, kept its spool, and kept being uploaded into: the
receiver's list went quiet while the sender ran to completion. Revoke
takes an offer back whatever it has already answered, the staging reader
gives up as soon as consent is gone, and the sender stops rather than
retrying a refusal three times over. A transfer withdrawn this way reads
as declined on both ends, which is what it is, rather than as a failure.
Android re-establishes the VpnService interface on every route change, which
replaces tun0 with a fresh device. The file drop listeners are bound to the
overlay address of the interface being swapped out: the IPv4 one dies with
accept4: invalid argument and never comes back, so a peer dialing the overlay
IPv4 address gets an RST. Restart the receiver once the new device is in place.
Files move directly between peers over the overlay, with no server in the
path. The receiver listens on the WireGuard address only, so the port is
unreachable from outside the tunnel, and every offer is matched to a known
peer before anything is read.
Consent is the default: an offer carries metadata alone, and no payload
moves until the receiver accepts. Policy is per profile and device-local —
off, ask, or auto-accept, with per-sender exceptions on top.
Policy and history live in the profile's preferences, so removing a profile
takes its file drop state with it. Transfers interrupted by a restart are
settled on load; nothing survives to finish them, and left alone they would
sit in the log as permanently pending.
The Android bindings pull payload bytes through a chunk-returning stream:
gomobile copies a []byte argument into a fresh Java array and never copies
it back, so a fill-my-buffer method would hand back the right length with
no data.
Introduce a namespaced preference store owned by the profile manager,
persisted next to the profile config as <id>.prefs.json and deleted with
the profile. Sections are opaque JSON, so the profile manager stays free
of any feature schema, and writes reuse the state file's atomic path.
Migrate the Android SSH known-hosts store and session list onto it. Both
previously lived outside the profile lifecycle: known hosts in a
per-profile file under filesDir, the session list in Java
SharedPreferences, each needing its own sweep against the live profile
list to avoid outliving the profile they belonged to. A profile ID that
got reused would have inherited the trusted keys of a deleted profile.
Both now share the "ssh" and "ssh-sessions" namespaces of the profile's
preferences, so deleting a profile takes them along and the Java-side
pruning is gone.
The known-hosts entries keep the OpenSSH line format, only the container
changed, and host key verification keeps rejecting a changed key
outright. SetKnownHostsPath becomes SetKnownHostsStore, taking the
config dir and profile ID instead of a file path.
Existing known-hosts files are not migrated: hosts trusted before this
change prompt for confirmation once more, which errs towards safety.
* [client] Pass stored email as login hint from UI and keep it on logout
Follow the CLI pattern: the Wails UI now reads the account email from the
user-owned profile state file and passes it as the OIDC login_hint on login
and session extend, since the daemon-side fallback runs as root and cannot
see the user's state file. Logout no longer deletes the stored email, so a
later login preselects the account at the IdP; profile removal remains the
operation that deletes it.
* [client] Log ignored profile lookup errors in extend-session hint fallback
* [client] Skip IPv6 route tests when the default nexthop is unusable
ensureIPv6DefaultRoute treated a successful netlink RouteAdd as proof that
a usable IPv6 nexthop exists. Installing ::/0 via loopback can succeed while
the kernel still rejects that nexthop for a concrete prefix, which surfaced
on ubuntu22/20260810.260 runners as:
add route to table: netlink add route: invalid argument
Probe the resolved nexthop by installing and removing a discard-prefix route
through the same code path the tests use, and skip when it fails. EEXIST
means the nexthop already carries a route, so it counts as usable.
* [client] Probe the IPv6 nexthop through raw netlink
addRoute swallows EAFNOSUPPORT and EOPNOTSUPP via isOpErr, so a nil return
did not prove the probe route was installed. Call netlink directly so an
unsupported operation skips the test instead of passing as usable.
GetOAuthFlow was the only flow factory without a hint parameter, which
forced its callers to apply the hint afterwards through a local setter
interface and a type assertion. Give it the same constructor-style hint
as NewOAuthFlow and set the hint on the concrete flows before they are
handed out as the interface, so a flow is always complete when built
and the caller-side ordering constraint disappears.
An empty hint is a valid value meaning the IdP chooses the account, so
the flows set it unconditionally.
Remove Engine.VerifySSHHostKey and keep GetPeerSSHKey as the only SSH
key API on the Engine. Verification now lives in the ssh package as a
PeerKeyLookup func type implementing HostKeyVerifier, shared by the
android and embed clients.
Extract the identical PTY session setup shared by the wasm and Android
terminal clients into ssh.StartPTYSession, and move the stored-key host
verification onto the engine so the embed client delegates and the
Android client passes the engine directly as HostKeyVerifier.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
## Describe your changes
`recordConnectionMetrics` mapped only `conntype.Relay` to `relay` and
let a `default` branch
record everything else as `ice`. That silently included `ICETurn` — an
ICE connection through
a TURN server, which
[`conn.isRelayed`](https://github.com/netbirdio/netbird/blob/main/client/internal/peer/conn.go#L788-L795)
itself counts as relayed — and `None`, the transient state set when the
relay drops
([conn.go:632](https://github.com/netbirdio/netbird/blob/main/client/internal/peer/conn.go#L632))
or the peer state is reset
([conn.go:757](https://github.com/netbirdio/netbird/blob/main/client/internal/peer/conn.go#L757)).
Both were reported as direct peer-to-peer, so the `ice` share overstated
direct connections on
every platform.
The mapping now lists every priority explicitly and emits `ice_p2p`,
`ice_turn`, `relay` or
`unknown`. The new values deliberately do not reuse `ice` to avoid
ambuguity.
## Issue ticket number and link
No public issue. Found while reviewing the first production sample of
client metrics: 38% of iOS
connection events were tagged `ice` on a platform that forces relay by
default, which traced back
to the `default` branch at
[client/internal/peer/conn.go#L963-L968](https://github.com/netbirdio/netbird/blob/main/client/internal/peer/conn.go#L963-L968).
## Stack
<!-- branch-stack -->
### Checklist
- [x] Is it a bug fix
- [ ] Is a typo/documentation fix
- [ ] Is a feature enhancement
- [ ] It is a refactor
- [x] Created tests that fail without the change (if possible)
> By submitting this pull request, you confirm that you have read and
agree to the terms of the [Contributor License
Agreement](https://github.com/netbirdio/netbird/blob/main/CONTRIBUTOR_LICENSE_AGREEMENT.md).
## Documentation
Select exactly one:
- [] I added/updated documentation for this change
- [x] Documentation is **not needed** for this change (explain why)
Internal metrics documentation only, in
`client/internal/metrics/infra/README.md`: the four
`connection_type` values with their derivation, and a note that pre-fix
`ice` samples are not
comparable with `ice_p2p`. No public API, CLI or configuration change,
so no netbirdio/docs PR.
### Docs PR URL (required if "docs added" is checked)
Paste the PR link from https://github.com/netbirdio/docs here:
N/A
<!-- This is an auto-generated comment: release notes by coderabbit.ai
-->
## Summary by CodeRabbit
## Summary by CodeRabbit
* **New Features**
* Connection metrics now distinguish direct peer-to-peer, TURN-assisted,
relay, and unknown connection types.
* Metrics include clearer connection and peer identification details.
* **Documentation**
* Updated connection timing metric values, traffic semantics, priority
behavior, and historical data guidance.
* **Bug Fixes**
* Unset or unrecognized connection priorities are no longer incorrectly
classified as peer-to-peer.
* Unknown-transport metrics are skipped to prevent misleading connection
data.
<!-- end of auto-generated comment: release notes by coderabbit.ai -->
## Describe your changes
The Conn struct is reused across lazy-connection deactivate/activate.
Close
cancels the WireGuard watcher (via wgWatcherCancel, and ctxCancel also
tears
down its context) but left conn.wgWatcher pointing at the stopped
instance.
enableWgWatcherIfNeeded skips while conn.wgWatcher is non-nil, so the
next Open
never started a fresh watcher: once a lazy connection had idled and
woken, the
peer ran with no watcher at all — no WireGuard handshake-timeout
detection and
none of the escalation that depends on it.
Clear conn.wgWatcher and conn.wgWatcherCancel in Close so the next Open
re-arms
a fresh watcher.
## Issue ticket number and link
<!--
Required for anything that changes behavior. Link the issue (or the
validated
discussion it came from) that the NetBird team already agreed on. See
https://github.com/netbirdio/netbird/blob/main/CONTRIBUTING.md#ticket-first-pr-second
-->
## Stack
<!-- branch-stack -->
### Checklist
- [X] Is it a bug fix
- [ ] Is a typo/documentation fix
- [ ] Is a feature enhancement
- [ ] It is a refactor
- [ ] Created tests that fail without the change (if possible)
- [ ] I ran and tested this change locally — I did not rely on CI to
find out whether it works
- [ ] This PR has a single purpose (not a fix + refactor + feature in
one)
- [ ] This change is a trivial fix, **OR** it links an issue the NetBird
team agreed on beforehand. Changes to the public API, gRPC protocols,
functionality behavior, CLI / service flags, or new features always need
that agreement first. See
[CONTRIBUTING.md](https://github.com/netbirdio/netbird/blob/main/CONTRIBUTING.md#ticket-first-pr-second).
> By submitting this pull request, you confirm that you have read and
agree to the terms of the [Contributor License
Agreement](https://github.com/netbirdio/netbird/blob/main/CONTRIBUTOR_LICENSE_AGREEMENT.md).
## Documentation
Select exactly one:
- [ ] I added/updated documentation for this change
- [X] Documentation is **not needed** for this change (explain why)
### Docs PR URL (required if "docs added" is checked)
Paste the PR link from https://github.com/netbirdio/docs here:
https://github.com/netbirdio/docs/pull/__
<!-- This is an auto-generated comment: release notes by coderabbit.ai
-->
## Summary by CodeRabbit
* **Bug Fixes**
* Improved connection cleanup by fully releasing WireGuard watcher
resources when a connection closes.
<!-- end of auto-generated comment: release notes by coderabbit.ai -->
## Describe your changes
Pull fresh TUN settings on Android rebuild instead of push
The Android TUN rebuild consumed state pushed through notifications and
a Java-side snapshot, and both sources were unreliable. The DNS
search-domain notifier fired OnNetworkChanged with an empty string,
which the rebuild handler treated as the new route list, so any search
domain change rebuilt the TUN with zero routes and cut all tunnel
traffic. The rebuild also reused the search domains cached at the last
establish, so search domain updates never reached the TUN at runtime.
Make the notification a pure trigger and let the Java side pull a fresh
snapshot instead. Expose GetTunSettings on the Android SDK client: it
returns the current TUN route ranges, derived on demand by the route
manager from the client routes, the exit-node selection and the fake IP
blocks, together with the DNS search domains. The route notifier keeps
only its last-announced baseline to suppress triggers for unchanged
syncs; the TUN route state is owned by the route manager. SearchDomains
now locks the DNS server mutex since the pull arrives from a Java
thread.
Requires the matching android-client change that switches recreateTUN to
the pull API.
## Issue ticket number and link
## Stack
<!-- branch-stack -->
### Checklist
- [x] Is it a bug fix
- [ ] Is a typo/documentation fix
- [ ] Is a feature enhancement
- [ ] It is a refactor
- [ ] Created tests that fail without the change (if possible)
- [ ] This change does **not** modify the public API, gRPC protocols,
functionality behavior, CLI / service flags, or introduce a new feature
— **OR** I have discussed it with the NetBird team beforehand (link the
issue / Slack thread in the description). See
[CONTRIBUTING.md](https://github.com/netbirdio/netbird/blob/main/CONTRIBUTING.md#discuss-changes-with-the-netbird-team-first).
> By submitting this pull request, you confirm that you have read and
agree to the terms of the [Contributor License
Agreement](https://github.com/netbirdio/netbird/blob/main/CONTRIBUTOR_LICENSE_AGREEMENT.md).
## Documentation
Select exactly one:
- [ ] I added/updated documentation for this change
- [x] Documentation is **not needed** for this change (explain why)
### Docs PR URL (required if "docs added" is checked)
Paste the PR link from https://github.com/netbirdio/docs here:
https://github.com/netbirdio/docs/pull/__
<!-- This is an auto-generated comment: release notes by coderabbit.ai
-->
## Summary by CodeRabbit
- **New Features**
- Added access to current TUN route ranges and DNS search domains.
- TUN settings are returned in a mobile-friendly format for easier
integration.
- **Improvements**
- Route changes are detected and synchronized more reliably.
- Current routing information now reflects active routes, including
supported fake-IP ranges.
- Simplified network initialization for more consistent startup
behavior.
- **API Changes**
- Removed the obsolete network-map retrieval method from the management
client interface.
<!-- end of auto-generated comment: release notes by coderabbit.ai -->
## Describe your changes
The Android route notifier and the DNS search-domain notifier both
delivered OnNetworkChanged from a fire-and-forget goroutine per update.
Two updates in quick succession could reach the Java side reordered: the
TUN rebuild handler applies them in arrival order and compares against
the last applied parameters, so a stale route set delivered last won as
the final TUN state. This is the same reordering hazard fixed for iOS in
#6454.
Wrap the Android network change listener into the shared tunnelnotifier
FIFO introduced in #6870, the same way RunOniOS does, and deliver both
notifiers synchronously into it. Enqueueing is non-blocking, a single
delivery goroutine preserves order, and calls into Java never overlap.
Also stop hasRouteDiff from sorting the notifier's shared route slices
in place; compare sorted copies instead.
## Issue ticket number and link
## Stack
<!-- branch-stack -->
### Checklist
- [x] Is it a bug fix
- [ ] Is a typo/documentation fix
- [ ] Is a feature enhancement
- [ ] It is a refactor
- [ ] Created tests that fail without the change (if possible)
- [ ] This change does **not** modify the public API, gRPC protocols,
functionality behavior, CLI / service flags, or introduce a new feature
— **OR** I have discussed it with the NetBird team beforehand (link the
issue / Slack thread in the description). See
[CONTRIBUTING.md](https://github.com/netbirdio/netbird/blob/main/CONTRIBUTING.md#discuss-changes-with-the-netbird-team-first).
> By submitting this pull request, you confirm that you have read and
agree to the terms of the [Contributor License
Agreement](https://github.com/netbirdio/netbird/blob/main/CONTRIBUTOR_LICENSE_AGREEMENT.md).
## Documentation
Select exactly one:
- [ ] I added/updated documentation for this change
- [x] Documentation is **not needed** for this change (explain why)
### Docs PR URL (required if "docs added" is checked)
Paste the PR link from https://github.com/netbirdio/docs here:
https://github.com/netbirdio/docs/pull/__
The fake IP manager was only created at route manager construction, from the DNS feature flag fetched by the initial GetNetworkMap call. When the flag flipped to true mid-session, UpdateRoutes set useNewDNSRoute but never created the manager, so domain routes added after the flip got a DNS interceptor with a nil fake IP manager.
internalDnatFw only checked for a firewall and GOOS, so the interceptor took the DNAT path and called GetFakeIP/AllocateFakeIP on the nil *fakeip.Manager. These methods lock m.mu first, which is a nil pointer dereference: the first DNS answer for such a route panicked and crashed the VPN service. The fake IP blocks (240.0.0.0/8 and its v6 pair) also never reached the TUN, since only the constructor registered them.
Create the manager and its TUN routes from UpdateRoutes when the flag turns on, notify so the fake IP blocks get into the TUN without a client route change, and treat a nil manager as no internal DNAT.
This is groundwork for removing the initial GetNetworkMap fetch, after which every startup goes through the flag-off-to-on transition.
## Describe your changes
Three fixes to how the desktop GUI keeps the account email that backs
the SSO `login_hint`. Each is independent and reviewable on its own.
**1. Store the email after a GUI SSO login**
The daemon returns the authenticated user's email from `WaitSSOLogin`
but cannot persist it: it runs as root while the per-profile state file
is user-owned. The CLI's `handleSSOLogin` writes it after its own
`WaitSSOLogin`; the GUI path read the value and dropped it.
The profile was therefore left with no email, so `Profiles.List` showed
no account for it, and later logins and session extends went out with no
`login_hint` — leaving the IdP to pick an account instead of reusing the
one the profile belongs to. Mirror the CLI and store it, next to the
`Logout` path that already clears the same file for the same reason.
**2. File the email against the profile the login ran for**
`SetActiveProfileState` resolves the target itself, so it writes to
whichever profile is active when it is called. A GUI SSO login spans
seconds of user interaction in the browser, and the tray stays clickable
throughout: switching profiles in that window left the email filed under
the profile that happened to be active when the flow returned. The wrong
profile then advertised an account it does not own, and offered it as
the `login_hint` next time.
Adds `SetProfileState(id, state)`, the write-side counterpart of the
existing `GetProfileState(id)`, and keeps `SetActiveProfileState` as a
wrapper for callers with no particular profile in mind. `Login` now
reports the profile it resolved so the frontend can hand it back with
the SSO wait, which closes the window.
**3. Delete the email when a profile is removed**
Removing a profile left its state file behind: the daemon deletes what
it owns, but the email file is user-owned and out of reach for a root
daemon — the same split that already puts the `Logout` cleanup on the UI
side.
Beyond the stray file, legacy profiles are keyed by name rather than by
a generated ID, so recreating a profile under a removed one's name
inherited its email — shown as the account in the profile list and sent
as the `login_hint` on the next login.
## Issue ticket number and link
## Stack
<!-- branch-stack -->
### Checklist
- [x] Is it a bug fix
- [ ] Is a typo/documentation fix
- [ ] Is a feature enhancement
- [ ] It is a refactor
- [ ] Created tests that fail without the change (if possible)
- [ ] This change does **not** modify the public API, gRPC protocols,
functionality behavior, CLI / service flags, or introduce a new feature
— **OR** I have discussed it with the NetBird team beforehand (link the
issue / Slack thread in the description). See
[CONTRIBUTING.md](https://github.com/netbirdio/netbird/blob/main/CONTRIBUTING.md#discuss-changes-with-the-netbird-team-first).
> By submitting this pull request, you confirm that you have read and
agree to the terms of the [Contributor License
Agreement](https://github.com/netbirdio/netbird/blob/main/CONTRIBUTOR_LICENSE_AGREEMENT.md).
## Documentation
Select exactly one:
- [ ] I added/updated documentation for this change
- [x] Documentation is **not needed** for this change (explain why)
### Docs PR URL (required if "docs added" is checked)
Paste the PR link from https://github.com/netbirdio/docs here:
https://github.com/netbirdio/docs/pull/__
<!-- This is an auto-generated comment: release notes by coderabbit.ai
-->
## Summary by CodeRabbit
- **New Features**
- SSO login details can now be saved to the specific profile selected
during sign-in.
- Profile state can be managed independently for different profiles.
- **Bug Fixes**
- Removing a profile now also cleans up its associated saved state.
- Cleanup issues no longer prevent successful profile removal and are
handled gracefully.
- Existing active-profile behavior remains unchanged.
<!-- end of auto-generated comment: release notes by coderabbit.ai -->
## Describe your changes
`getInterfaceIndex` in the iOS upstream DNS resolver dereferenced the
result of `net.InterfaceByName` before checking the error, so a missing
interface (e.g. during teardown or renaming) caused a nil-pointer panic
instead of a DNS client error.
The helper now returns a wrapped error before touching the interface;
the only caller, `GetClientPrivate`, already propagates the error.
The helper moved to an un-build-tagged file so it can be unit-tested on
host platforms while remaining available to the iOS build. Added a test
covering the missing-interface path. Verified with the new host test, an
iOS arm64 CGO compile, and `git diff --check`.
## Issue ticket number and link
N/A
## Stack
<!-- branch-stack -->
Standalone PR based on `main`.
### Checklist
- [x] Is it a bug fix
- [ ] Is a typo/documentation fix
- [ ] Is a feature enhancement
- [ ] It is a refactor
- [x] Created tests that fail without the change (if possible)
- [x] This change does **not** modify the public API, gRPC protocols,
functionality behavior, CLI / service flags, or introduce a new feature
— **OR** I have discussed it with the NetBird team beforehand (link the
issue / Slack thread in the description). See
[CONTRIBUTING.md](https://github.com/netbirdio/netbird/blob/main/CONTRIBUTING.md#discuss-changes-with-the-netbird-team-first).
> By submitting this pull request, you confirm that you have read and
agree to the terms of the [Contributor License
Agreement](https://github.com/netbirdio/netbird/blob/main/CONTRIBUTOR_LICENSE_AGREEMENT.md).
## Documentation
Select exactly one:
- [ ] I added/updated documentation for this change
- [x] Documentation is **not needed** for this change (explain why)
Internal crash fix in the iOS DNS path; no user-facing behavior or
configuration changes.
### Docs PR URL (required if "docs added" is checked)
N/A
<!-- This is an auto-generated comment: release notes by coderabbit.ai
-->
## Summary by CodeRabbit
* **Bug Fixes**
* Improved handling of network interface lookup failures with clearer
error messages that identify the affected interface.
* Added validation for network interface lookups, including reliable
error handling when an interface cannot be found.
* **Tests**
* Added coverage for both successful interface resolution and
missing-interface scenarios.
<!-- end of auto-generated comment: release notes by coderabbit.ai -->
## Describe your changes
`NB_LAZY_CONN_INACTIVITY_THRESHOLD` was parsed with `strconv.Atoi`, i.e.
as a bare
integer number of minutes. The documentation, however, states it takes a
Go duration
(e.g. `30m`, `1h`). As a result any documented value such as `30m` or
`5m` failed to
parse and **silently fell back to the 15m default**, so the setting
appeared to have
no effect.
`inactivityThresholdEnv()` now parses the value with
`time.ParseDuration`, matching
the docs. A bare integer is still accepted as a number of minutes for
backwards
compatibility, and an unparseable value logs a warning and falls back to
the default.
Added `TestInactivityThresholdEnv` covering Go-duration values
(`30m`/`1h`/`90s`), the
bare-integer minutes fallback, and zero/negative/garbage inputs.
## Issue ticket number and link
N/A
Zoltán Papp
