Strict mode (NB_PQ_MLKEM_STRICT, default off) closes the initial PQ-vulnerable
window (NET-1408): when enabled, conn.presharedKey programs a per-conn random
sentinel PSK until the ML-KEM exchange derives the real one, so no session can form
on a non-PQ key (the real PSK is pushed via SetPresharedKey once it converges).
Default stays opportunistic.
Also surface PQ status: the peer 'Quantum resistance' flag (RosenpassEnabled) is now
true when an ML-KEM PSK has been derived for the peer, not only for Rosenpass.
The idle-gate reads LastActivities, which only tracks per-peer data in userspace;
in kernel mode it is empty, so the gate treated every kernel peer as idle and
disabled data-path rotation entirely. Detect the bind via IsUserspaceBind and, in
kernel mode, report zero activity age (always 'active') so rotation runs on every
rekey. Lazy back-to-idle is already limited in kernel; the eBPF WG-activity
detection will later supply a real signal that excludes handshake/pqkem traffic.
Replace the raw SHA-256 concat combiner with HKDF-SHA256 (crypto/hkdf, Go 1.24):
IKM = ML-KEM_ss || X25519_ss (draft-ietf-tls-ecdhe-mlkem order), salt = the
domain-separation label, info = full transcript (offer || answer) || canonicalised
peer identities. Keeps the transcript + identity binding while using a proper KDF.
- Add a trace slog level (NB_PQ_MLKEM_LOG_LEVEL=trace) and move the verbose
per-exchange lifecycle logs (offer/answer/PSK/ack/rotation) to it, so debug
stays quiet and troubleshooting is opt-in.
- Stop logging the raw preshared key; drop the temporary pqkem-dbg OnRemoteOffer/
OnRemoteAnswer probes.
- Demote the per-handshake conn log to trace.
Source OnDataPathRekeyed from the WGWatcher's per-handshake callback
(onWGCheckSuccess), which fires only on a fresh handshake, and OnDataPathDown
from the handshake-timeout path. A fresh handshake clocks the next chained
KEM exchange pushed over the data-path UDP transport.
Learn the peer's data-path endpoint from the signalling offer/answer: its WG
overlay IP combined with the advertised pq UDP port (SetRemotePort -> AddPeer).
Registering here is safe before the tunnel is up because sends only ever fire
once it is (clocked by OnDataPathRekeyed). RemovePeer is wired at peer teardown
(engine.removePeer), not on transient disconnect.
We clock the next Offer initiation to the OnDataPathRekeyed, so we have 2 minutes
ahead of us to do our attempts and stuff before to give up.
On failure, we will know because we will not receive a new answer.. but more importantly
the wg handshake will fail :D
Define OnDataPathRekeyed event to transition from control plane path to data plane path over the WG tunnel.
Keep confirm ALWAYS on NEW established WG tunnel (posthandshake with rekeying). We keep an active method
irrelevant of the WG handshake (we might decide that the indirect wg handshake is sufficient in the future).
Optimistic commit on responder(when sending answer), while on initiator we set it on getting the answer
- Have just one manager => one lock
- Session state is needed in driver to => we have it available now.
- Isomorphically align to rosenpass components and functionality
File Role rosenpass equivalent
kem.go primitive pure X25519MLKEM768 crypto.go/handshake
message.go Offer/Answer/Confirm + Encode/Decode messages.go
manager.go Manager stateful, single lock server logic
callbacks.go WGCallbackHandler (seam output) Handler
Transport (interfaccia) seam trasporto pluggable Conn
## Describe your changes
`getInterfaceIndex` in the iOS upstream DNS resolver dereferenced the
result of `net.InterfaceByName` before checking the error, so a missing
interface (e.g. during teardown or renaming) caused a nil-pointer panic
instead of a DNS client error.
The helper now returns a wrapped error before touching the interface;
the only caller, `GetClientPrivate`, already propagates the error.
The helper moved to an un-build-tagged file so it can be unit-tested on
host platforms while remaining available to the iOS build. Added a test
covering the missing-interface path. Verified with the new host test, an
iOS arm64 CGO compile, and `git diff --check`.
## Issue ticket number and link
N/A
## Stack
<!-- branch-stack -->
Standalone PR based on `main`.
### Checklist
- [x] Is it a bug fix
- [ ] Is a typo/documentation fix
- [ ] Is a feature enhancement
- [ ] It is a refactor
- [x] Created tests that fail without the change (if possible)
- [x] This change does **not** modify the public API, gRPC protocols,
functionality behavior, CLI / service flags, or introduce a new feature
— **OR** I have discussed it with the NetBird team beforehand (link the
issue / Slack thread in the description). See
[CONTRIBUTING.md](https://github.com/netbirdio/netbird/blob/main/CONTRIBUTING.md#discuss-changes-with-the-netbird-team-first).
> By submitting this pull request, you confirm that you have read and
agree to the terms of the [Contributor License
Agreement](https://github.com/netbirdio/netbird/blob/main/CONTRIBUTOR_LICENSE_AGREEMENT.md).
## Documentation
Select exactly one:
- [ ] I added/updated documentation for this change
- [x] Documentation is **not needed** for this change (explain why)
Internal crash fix in the iOS DNS path; no user-facing behavior or
configuration changes.
### Docs PR URL (required if "docs added" is checked)
N/A
<!-- This is an auto-generated comment: release notes by coderabbit.ai
-->
## Summary by CodeRabbit
* **Bug Fixes**
* Improved handling of network interface lookup failures with clearer
error messages that identify the affected interface.
* Added validation for network interface lookups, including reliable
error handling when an interface cannot be found.
* **Tests**
* Added coverage for both successful interface resolution and
missing-interface scenarios.
<!-- end of auto-generated comment: release notes by coderabbit.ai -->
## Describe your changes
`NB_LAZY_CONN_INACTIVITY_THRESHOLD` was parsed with `strconv.Atoi`, i.e.
as a bare
integer number of minutes. The documentation, however, states it takes a
Go duration
(e.g. `30m`, `1h`). As a result any documented value such as `30m` or
`5m` failed to
parse and **silently fell back to the 15m default**, so the setting
appeared to have
no effect.
`inactivityThresholdEnv()` now parses the value with
`time.ParseDuration`, matching
the docs. A bare integer is still accepted as a number of minutes for
backwards
compatibility, and an unparseable value logs a warning and falls back to
the default.
Added `TestInactivityThresholdEnv` covering Go-duration values
(`30m`/`1h`/`90s`), the
bare-integer minutes fallback, and zero/negative/garbage inputs.
## Issue ticket number and link
N/A
On iOS the tunnel reconfiguration (setTunnelNetworkSettings) was driven
from three independent Go paths without serialization: route prefix
updates via the route notifier's own delivery loop, interface IP/IPv6
set synchronously from the engine start goroutine, and DNS config
applied from the DNS apply chain through a separate Swift object. The
three sources mutated the shared Swift settings-manager state
concurrently and triggered overlapping updateTunnel() calls, losing or
half-applying route and DNS settings.
Introduce client/internal/tunnelnotifier: a single notifier that
implements both listener.NetworkChangeListener and dns.IosDnsManager,
queues all four callbacks (OnNetworkChanged, SetInterfaceIP,
SetInterfaceIPv6, ApplyDns) in one FIFO and delivers them one-by-one
from a single goroutine, so calls into Swift never overlap and arrive in
order. RunOniOS wraps the two Swift objects into the notifier and closes
it after the run loop exits.
The route notifier keeps its prefix dedup but delegates delivery to the
shared notifier instead of maintaining its own queue and loop; the dedup
check and the enqueue stay under one mutex so queue order matches
state-update order. Setting the interface IP becomes asynchronous, which
is safe: on iOS wgInterface.Create() only uses the TunFd, and the FIFO
preserves the IP -> routes/DNS relative order.
The package is build-tag free so the unit tests run on any platform
under -race. Android is unaffected: it receives all settings atomically
in one configureInterface call and serializes TUN rebuilds on a single
handler thread.
## Describe your changes
## Issue ticket number and link
## Stack
<!-- branch-stack -->
### Checklist
- [x] Is it a bug fix
- [ ] Is a typo/documentation fix
- [ ] Is a feature enhancement
- [x] It is a refactor
- [ ] Created tests that fail without the change (if possible)
- [ ] This change does **not** modify the public API, gRPC protocols,
functionality behavior, CLI / service flags, or introduce a new feature
— **OR** I have discussed it with the NetBird team beforehand (link the
issue / Slack thread in the description). See
[CONTRIBUTING.md](https://github.com/netbirdio/netbird/blob/main/CONTRIBUTING.md#discuss-changes-with-the-netbird-team-first).
> By submitting this pull request, you confirm that you have read and
agree to the terms of the [Contributor License
Agreement](https://github.com/netbirdio/netbird/blob/main/CONTRIBUTOR_LICENSE_AGREEMENT.md).
## Documentation
Select exactly one:
- [ ] I added/updated documentation for this change
- [x] Documentation is **not needed** for this change (explain why)
### Docs PR URL (required if "docs added" is checked)
Paste the PR link from https://github.com/netbirdio/docs here:
https://github.com/netbirdio/docs/pull/__
<!-- codesmith:footer -->
---
<a
href="https://app.blacksmith.sh/netbirdio/codesmith/netbird/pr/6870"><picture><source
media="(prefers-color-scheme: dark)"
srcset="https://pr-comments-assets.blacksmith.sh/codesmith/view-with-codesmith-dark-v2.svg"><source
media="(prefers-color-scheme: light)"
srcset="https://pr-comments-assets.blacksmith.sh/codesmith/view-with-codesmith-light-v2.svg"><img
alt="View with [code]smith"
src="https://pr-comments-assets.blacksmith.sh/codesmith/view-with-codesmith-dark-v2.svg"></picture></a>
<a
href="https://backend.blacksmith.sh/track/enable-autofix?expires=1787404610&installation_model_id=427504&pr_number=6870&repository=netbirdio%2Fnetbird&return_to=https%3A%2F%2Fgithub.com%2Fnetbirdio%2Fnetbird%2Fpull%2F6870&signature=7db66c4ec4262cc21137b3d3e1fd5e905950eab82ef46236a13ac3d512ff2a16"><picture><source
media="(prefers-color-scheme: dark)"
srcset="https://pr-comments-assets.blacksmith.sh/codesmith/autofix-with-codesmith-dark.svg"><source
media="(prefers-color-scheme: light)"
srcset="https://pr-comments-assets.blacksmith.sh/codesmith/autofix-with-codesmith-light.svg"><img
alt="Autofix with [code]smith"
src="https://pr-comments-assets.blacksmith.sh/codesmith/autofix-with-codesmith-dark.svg"></picture></a>
<sup>Need help on this PR? Tag <code>@codesmith-bot</code> with what you
need. Autofix is disabled.</sup>
<!-- codesmith:autofix:disabled -->
<!-- /codesmith:footer -->
<!-- This is an auto-generated comment: release notes by coderabbit.ai
-->
## Summary by CodeRabbit
* **New Features**
* Improved iOS tunnel networking by coordinating network, interface,
route, and DNS updates through a unified notifier.
* Updated iOS behavior so route/prefix changes are applied immediately
instead of via queued/background delivery.
* **Bug Fixes**
* Improved reliability by ensuring network and DNS-related callbacks are
invoked in order without overlap.
* Ensured pending updates are drained and handled correctly during
shutdown.
* **Tests**
* Added coverage for FIFO ordering, non-overlapping callback execution,
interleaved DNS/route updates, and graceful shutdown behavior.
<!-- end of auto-generated comment: release notes by coderabbit.ai -->
