The purity note still said profilemanager.GetConfig, which the rename two
commits later turned into GetExistingConfig.
Reported by cubic-dev-ai on PR #7398.
With the update-settings kill switch on, `netbird up --enable-rosenpass`
connected and said almost nothing: SetConfig refused the change, the CLI
downgraded that to a warning, and Login carries no rosenpass field to apply, so
the flag was silently dropped. The setting stayed disabled, which is the point
of the switch, but the caller was never told their request had been ignored.
The refusal now travels as codes.FailedPrecondition instead of
codes.Unavailable, and the CLI fails on it. Unavailable means "the daemon
cannot serve this call", which is why the CLI downgraded it and why
client/ui/services reads it as an unreachable daemon — both wrong for a daemon
that answered and refused. FailedPrecondition also matches what the MDM gate
already returns for a managed field, so both refusals are now one class of
error, and it is added to the login backoff's early-exit codes so a refused
login stops instead of retrying for 30s.
This does not put the container back in the deadlock: with the value-aware
gate, a client restating its own configuration is not refused at all, so
nothing reaches this path unless a real change was asked for.
Two findings on the same consequence of pure reads: a profile can legitimately
carry no keys, because logging out clears them in place.
- sendLogoutRequestWithConfig went straight to wgtypes.ParseKey and failed with
"incorrect key size: 0" on the second logout of the same profile. There is
nothing to deregister for a peer that was never registered, so it returns
cleanly. Before pure reads this case was hidden: the read minted a key and
the daemon dialed management with one it had never seen.
- The mobile logout read the config with the generating reader right after
checking the file exists. The two are not atomic, so a profile removed in
between was resolved from the defaults and recreated by the write that
follows. It uses the existing-file reader now.
Reported by cubic-dev-ai and CodeRabbit on PR #7398.
- Login logged the active-profile-state error and returned the same cause; the
repo's guidelines call for one or the other, and the wrapped error is the one
that carries context. (CodeRabbit)
- `netbird up` reported a codes.Unavailable SetConfig failure as "the daemon
refused the settings update", but that code also covers a daemon that became
unreachable. It now reports what the daemon said without asserting why.
(cubic-dev-ai)
- TestLogin_ChangingTheManagementURLIsRefused asserted the error and nothing
else, while "refused before it can touch daemon state" is the contract. It now
checks the stored management URL, the in-progress login and the active profile,
matching its SetConfig counterpart. (cubic-dev-ai)
ReadConfig and GetConfig differed in one thing — what happens when the file is
absent — and neither name said which was which:
- ReadConfig -> ReadOrGenerateConfig (reads it, or generates one in memory)
- GetConfig -> GetExistingConfig (reads it, or fails)
Three comments went with them:
- GetConfig's said "return with Config and if it was created. Errors out if it
does not exist", which described a bool it does not return and a creation it
never performs.
- ReadConfig's explained that it does not write, which is what a reader is
supposed to do anyway.
- Server.getConfig's said it "errors out if it does not exist", which it does
not — it resolves a default config, and now provisions the identity too.
Reading a config wrote it back. profilemanager.readConfig persisted whatever
apply() had filled in, and ReadConfig created and wrote the file outright when
it was absent, so every reader was quietly a writer: a gate deciding whether to
refuse a request, a UI listing profiles, a mobile getter reading one preference.
The previous commit worked around that with a PeekConfig variant, which left
two read functions with opposite side effects and the antipattern still there
for everyone else.
Only one thing in a read genuinely had to be persisted: apply() generated the
WireGuard and SSH keys when it found them empty, and a generated key cannot be
recomputed — losing it means the peer comes back with a different identity and
registers again. Everything else apply() fills in is a deterministic default
that the next read recomputes anyway.
So identity provisioning is now its own step, Config.EnsureIdentity, and the
callers that provision write the result out themselves, in the open:
- Server.getConfig, the daemon's provisioning point;
- the CLI's foreground login, which is about to dial management;
- update() / directUpdate(), the config write paths — a stored profile can
legitimately carry no identity, since a mobile logout clears the keys in
place, and the next write is what has to mint a new one.
ReadConfig and GetConfig no longer write anything, PeekConfig is gone, and the
dry-run baseline no longer needs placeholder keys to keep apply() from minting
real ones.
One deliberate leftover: readConfig still calls util.EnforcePermission, which
chmods a config file whose permissions are too broad. It changes no content and
is idempotent, and dropping it would leave a legacy file world-readable until
its first write.
- loginOverridesInput's nil-message guard cannot be reached: Login
dereferences the message well before it, in storedLoginConfig.
- The docstring above afterLoginPreCheck described persistLoginOverrides,
which lives further down the file and now carries its own.
- UpdateConfig's comment named DirectUpdateConfig; the function is
DirectUpdateOrCreateConfig.
Login checks twice on purpose: the first check refuses the ordinary case
early, and authorizeAndPrepareLogin re-takes the authoritative one under
guardedConfigMu because the first is unsynchronized against a concurrent
privileged request. The update-settings decision is now equally
value-dependent — it compares the request against the stored config — but it
was taken only in the first, unlocked check.
So a login that was a no-op when it was checked could be written after a
concurrent writer had repointed the profile, which is exactly the window the
lock exists to close. The decision is now re-taken alongside the privilege one,
which also makes it the last read before persistLoginOverrides writes.
The test drives that interleaving through the existing afterLoginPreCheck seam
and fails without the re-check.
The update-settings gate needs the stored config to decide whether a request
changes anything, so the previous commit moved that read ahead of the refusal.
The read is not side-effect free: profilemanager.GetConfig writes the config
back whenever apply() has to fill in a default the file was missing. A request
that the gate then refuses had therefore already rewritten the profile file.
PeekConfig is GetConfig without that write-back. The returned config is still
normalized in memory, which is what the decision needs; the file is left
exactly as it was found. Every caller of storedConfigAtPath feeds a gate that
can refuse, so they all peek.
Note for reviewers: the daemon still normalizes the file on startup and on
every real update, so nothing depends on a read performing that write.
The update-settings kill switch (--disable-update-settings /
NB_DISABLE_UPDATE_SETTINGS / the MDM DisableUpdateSettings key) forbids
changing settings, but it decided what a "change" was by looking at
whether a field was present in the request. The CLI fills the whole
config surface of SetConfigRequest and LoginRequest from its flags and
environment on every `netbird up` (setupSetConfigReq in cmd/up.go), so a
client configured by environment restates its own configuration on every
start and tripped the gate every time.
SetConfig only warned about that, but Login carries the same fields and
was gated the same way, and Login runs inside the CLI's backoff loop: the
daemon answered every attempt with codes.Unavailable, `netbird up` never
completed, and a container with NB_DISABLE_UPDATE_SETTINGS plus any
config env var (NB_MANAGEMENT_URL, for one) could not come up at all.
Both gates now compare values. Config.WouldChange is the dry-run half of
UpdateConfig: it runs the very same diff logic (Config.apply) against a
copy of the stored config, so the gate cannot drift from what an actual
update would do, nor go stale when a field is added. A request that
restates what the profile already holds changes nothing and is allowed; a
request that diverges is refused exactly as before, and a dry run that
cannot be evaluated fails closed. A profile with no config on disk yet is
judged against the config the daemon would create for it.
For Login, the compared input comes from loginOverridesInput, which
persistLoginOverrides also uses to perform the write, so the gate judges
precisely the two fields a login can persist (management URL, pre-shared
key) and no field it ignores.
Two adjacent defects surfaced while making the comparison exact:
- Config.apply compared URLs as raw strings, so the same endpoint spelled
without its default port ("https://api.netbird.io" vs
"https://api.netbird.io:443") counted as a new value and rewrote the
config. It now compares the parsed forms.
- UpdateConfig did not collapse the redacted pre-shared key, unlike
UpdateOrCreateConfig and DirectUpdateConfig, so a UI round-trip of the
mask replaced the stored key with asterisks.
The CLI warning for a refused SetConfig said the method was not available
in the daemon, which sent people looking for a version mismatch that was
not there; it now reports the refusal.
This introduces a disabled-by-default allow-remote-jobs setting that
controls whether the management server may run jobs (such as debug
bundles) on a peer. The flag propagates end to end: through client
configuration, the daemon SetConfig and Login requests, authentication,
and system info, up to management, where it is stored on the peer and
exposed on the peers API as remote_jobs_allowed. The client refuses any
management-requested job unless the peer has opted in. Because enabling
remote jobs crosses the user-to-root boundary, turning it on requires
privilege, mirroring the SSH-server gate. Administrators can enforce the
setting through MDM policy on both macOS and Windows, and MDM can also
override the debug-bundle upload URL. The change ships policy
documentation and generated profile templates, and adds configuration,
conflict, and enforcement tests covering the opt-in, privilege, and MDM
paths.
* [client] Allow logging out of the active profile when profiles are disabled
A profile-addressed logout was refused outright when the profiles feature is
disabled: handleProfileLogout ran validateProfileOperation, which returned
Unavailable ("profiles are disabled, you cannot use this feature without
profiles enabled") before looking at which profile was targeted.
The desktop UI always addresses logout by profile — both the profile menu and
the session-expiration dialog send the active profile's ID — so a client with
profiles disabled could not log out at all; only a plain `netbird logout`,
which takes the profile-less path, still worked. Logging out of the profile the
daemon is already running is a deregistration, not profile management, and with
profiles disabled there is a single profile anyway, so every profile-addressed
logout is by definition an active-profile logout.
Replace validateProfileOperation with validateProfileLogout, which skips the
profiles-disabled check when the target is the active profile and keeps gating
logout of any other profile. This mirrors switchProfileIfNeeded, which already
gates only the branch that actually manages profiles. The dropped
allowActiveProfile parameter was always true, leaving canRemoveProfile
unreachable, so both are removed.
* [client] Compare the username and propagate state errors on profile logout
Review follow-ups on the logout gate:
Propagate the GetActiveProfileState failure instead of discarding it. A failed
lookup made the target look non-active, so a caller with profiles disabled got
"profiles are disabled" in place of the real error.
Compare the username along with the ID when deciding whether the target is the
active profile, matching switchProfileIfNeeded. Legacy profile IDs are display
names, so two users can hold the same ID in their own profile directories, and
an ID-only match let one user's logout pass the gate against the other user's
active profile. The default profile is shared and carries no username, so it
keeps matching on the ID alone.
Re-read the active profile before the connection teardown rather than reusing
the pre-flight snapshot. Login switches profiles under guardedConfigMu, which
the logout path does not hold, so a login that landed while the deregistration
was in flight would otherwise lose its fresh connection to a stale flag.
* [client] Address review on the profile logout gate
Pass the username down to logoutFromProfile and reuse the running config only
when the target is the active profile for that username. On an ID-only match a
legacy profile ID shared between two users made the connected-client path
deregister the active peer while its connection stayed up, which the gate fix
alone did not cover.
Split the setup-key-less branch of Login into beginSSOLogin, with the
reuse-the-pending-flow decision in pendingOAuthFlowResponse. Login's cognitive
complexity drops from 37 to 21 (gocognit), clearing the SonarQube report on
this file with no behaviour change.
Point the test fixture at an https URL, since the profiles a gated logout must
not touch only need to be unreachable, not plaintext.
## Describe your changes
After the SSO session expires, the daemon tears the engine down
permanently
(management returns `PermissionDenied` → `runCancel()` → the retry loop
exits
for good). The "Session expired" dialog's Login button still drove the
extend-session flow, which requires a live engine: the user completed
the full
browser SSO + 2FA round trip only to get
`Failed to extend the session — engine is not initialised`, with no way
out
other than quitting and relaunching the client.
Reproduce:
1. Log in on a desktop client with session expiration enabled (e.g. 16h
TTL).
2. Let the session expire (e.g. leave the machine asleep overnight).
3. Wake it, click **Login** on the "Session expired" dialog, complete
SSO + 2FA.
4. The error dialog appears and every retry fails the same way.
Changes:
- The expired branch of the session-expiration dialog now emits
`trigger-login`, driving the full `Login → SSO → Up` sequence that
rebuilds
the client, instead of the extend flow (an expired session can no longer
be
extended).
- `RequestExtendAuthSession` fails fast when the engine is already gone,
so the
browser/2FA round trip is not wasted on a doomed extend.
- The expired tray row navigated the main window to `/#/login`, a route
that
does not exist and fell through to the main page without starting a
login;
it now emits `trigger-login` as well.
## Issue ticket number and link
<!--
Required for anything that changes behavior. Link the issue (or the
validated
discussion it came from) that the NetBird team already agreed on. See
https://github.com/netbirdio/netbird/blob/main/CONTRIBUTING.md#ticket-first-pr-second
-->
## Stack
<!-- branch-stack -->
### Checklist
- [x] Is it a bug fix
- [ ] Is a typo/documentation fix
- [ ] Is a feature enhancement
- [ ] It is a refactor
- [ ] Created tests that fail without the change (if possible)
- [ ] I ran and tested this change locally — I did not rely on CI to
find out whether it works
- [ ] This PR has a single purpose (not a fix + refactor + feature in
one)
- [ ] This change is a trivial fix, **OR** it links an issue the NetBird
team agreed on beforehand. Changes to the public API, gRPC protocols,
functionality behavior, CLI / service flags, or new features always need
that agreement first. See
[CONTRIBUTING.md](https://github.com/netbirdio/netbird/blob/main/CONTRIBUTING.md#ticket-first-pr-second).
> By submitting this pull request, you confirm that you have read and
agree to the terms of the [Contributor License
Agreement](https://github.com/netbirdio/netbird/blob/main/CONTRIBUTOR_LICENSE_AGREEMENT.md).
## Documentation
Select exactly one:
- [ ] I added/updated documentation for this change
- [x] Documentation is **not needed** for this change (explain why)
### Docs PR URL (required if "docs added" is checked)
Paste the PR link from https://github.com/netbirdio/docs here:
https://github.com/netbirdio/docs/pull/__
<!-- This is an auto-generated comment: release notes by coderabbit.ai
-->
## Summary by CodeRabbit
- **Bug Fixes**
- Improved session extension handling when the client engine is
unavailable by prompting users to log in again.
- Updated expired-session behavior to trigger the standard login flow,
providing a more consistent sign-in experience.
<!-- end of auto-generated comment: release notes by coderabbit.ai -->
## Describe your changes
Probe the daemon login with IsLoginRequired
The Login probe attemptLogin(ctx, "", "") on an unregistered peer ends
in registerPeer with no setup key and no JWT, which fails locally with
InvalidArgument before reaching Management. Since #6983 classified that
as StatusLoginFailed and returned early, every setup-key enrolment and
every expired-session SSO re-login aborted before using its credentials,
breaking all netbird-cloud e2e runs from commit e90be36cd.
IsLoginRequired asks the question the probe actually means - is the
peer's key alone still accepted - and reports Management's refusal as a
decision (needsLogin) instead of an error, the same pattern
foregroundLogin, Android and iOS already use.
## Issue ticket number and link
<!--
Required for anything that changes behavior. Link the issue (or the
validated
discussion it came from) that the NetBird team already agreed on. See
https://github.com/netbirdio/netbird/blob/main/CONTRIBUTING.md#ticket-first-pr-second
-->
## Stack
<!-- branch-stack -->
### Checklist
- [x] Is it a bug fix
- [ ] Is a typo/documentation fix
- [ ] Is a feature enhancement
- [ ] It is a refactor
- [ ] Created tests that fail without the change (if possible)
- [ ] I ran and tested this change locally — I did not rely on CI to
find out whether it works
- [ ] This PR has a single purpose (not a fix + refactor + feature in
one)
- [ ] This change is a trivial fix, **OR** it links an issue the NetBird
team agreed on beforehand. Changes to the public API, gRPC protocols,
functionality behavior, CLI / service flags, or new features always need
that agreement first. See
[CONTRIBUTING.md](https://github.com/netbirdio/netbird/blob/main/CONTRIBUTING.md#ticket-first-pr-second).
> By submitting this pull request, you confirm that you have read and
agree to the terms of the [Contributor License
Agreement](https://github.com/netbirdio/netbird/blob/main/CONTRIBUTOR_LICENSE_AGREEMENT.md).
## Documentation
Select exactly one:
- [ ] I added/updated documentation for this change
- [x] Documentation is **not needed** for this change (explain why)
### Docs PR URL (required if "docs added" is checked)
Paste the PR link from https://github.com/netbirdio/docs here:
https://github.com/netbirdio/docs/pull/__
<!-- This is an auto-generated comment: release notes by coderabbit.ai
-->
## Summary by CodeRabbit
* **Bug Fixes**
* Improved login handling when Management connectivity checks fail.
* Prevented unnecessary SSO prompts for already-authenticated sessions.
* Preserved setup-key login behavior while ensuring authentication
attempts proceed correctly.
* Login failures now return a clear failure status when authentication
state cannot be verified.
<!-- end of auto-generated comment: release notes by coderabbit.ai -->
* Improved residual state restoration during foreground startup and
foreground login, ensuring consistent recovery with stale states.
* Foreground flows now initialize advanced routing so stale routes
are bypassed during login.
Users reported long delays between finishing browser authentication and
the client connecting. Logs could not attribute the time: the PKCE and
device flows were silent between issuing the auth URL and returning the
token, and nothing recorded when the GUI issued the Up request after
WaitSSOLogin completed.
Add log lines covering the full chain: PKCE callback arrival and token
exchange duration, device-flow polling and approval timing, GUI-side
brackets around WaitSSOLogin and Up, daemon-side Up arrival and
WaitSSOLogin return, and a frontend stall detector that reports when
webview timers were suspended (macOS App Nap / hidden-window
throttling), which delays the WaitSSOLogin-to-Up handoff.
- **Wails v3 application** (`client/ui`) with a React + TypeScript + Tailwind frontend replacing the Fyne UI: main connection view, exit-node switcher, networks/peers browser with detail panels, profile management, settings (general, network, SSH, security, troubleshooting, appearance), debug-bundle creation, and a first-run welcome flow.
- **Internationalization**: go-i18n bundle with 9 locales (en, de, es, fr, hu, it, pt, ru, zh-CN) shared between the tray and the frontend.
- **New system tray** implementation with per-platform theme-aware icons, including a native XEmbed host for Linux (`xembed_tray_linux.c`) and a Linux theme watcher.
- **Session handling**: auth session watcher (`client/internal/auth/sessionwatch`), pending login flow, session-expiration dialog and tray notifications, and `netbird login` improvements.
- **Daemon API extensions** (`daemon.proto`): status stream subscription, event stream, networks/exit-node selection endpoints, and richer full status — with probe throttling on the daemon side to protect against UI-driven request storms.
- **UI preferences store** persisted per profile, autostart management via the daemon (single source of truth in HKCU on Windows).
- **Build system**: Taskfile-based builds per platform (macOS, Linux, Windows), Docker cross-compilation images, MSIX/NSIS/nfpm/AppImage packaging, and a new `frontend-ui` CI workflow.
Co-authored-by: Zoltan Papp <zoltan.pmail@gmail.com>
Co-authored-by: Eduard Gert <kontakt@eduardgert.de>
Co-authored-by: braginini <bangvalo@gmail.com>
Co-authored-by: Pascal Fischer <32096965+pascal-fischer@users.noreply.github.com>
Co-authored-by: riccardom <riccardomanfrin@gmail.com>
* [client] always clean up on Engine.Start failure via defer
The rosenpass init paths (NewManager/Run) returned without calling
e.close(), leaking the WireGuard interface and other partially
initialized state on failure. Per-branch cleanup was easy to miss when
adding new early returns.
Convert Start to a named error return and tear down via a single defer
that calls e.close() whenever err != nil, removing the scattered
per-branch close() calls (including the redundant one in initFirewall).
* [client] make Engine single-use and guard against double Start
Create the run context once in NewEngine instead of in Start. This
keeps e.cancel valid for the engine's whole lifetime, so Stop can
cancel a Start that is blocked waiting on the network while holding
syncMsgMux: Stop now cancels before taking the lock, unblocking that
Start so it can release the mutex.
Reject re-entry into Start: a non-nil wgInterface means a prior Start
already ran (ErrEngineAlreadyStarted), and a cancelled run context
means the engine was stopped (ErrEngineAlreadyStopped). Both checks run
before the cleanup defer so a duplicate call cannot tear down the
running engine's state.
* [client] let engine context unblock WaitStreamConnected
WaitStreamConnected only watched the signal client's own context, which
derives from the parent engineCtx rather than the engine's run context.
A Start blocked here (signal stream not yet up) could therefore not be
released by Engine.Stop, since Stop only cancels the engine's run
context.
Pass a context into WaitStreamConnected and select on it too, and have
the engine pass e.ctx, so Stop cancelling e.ctx unblocks a parked Start.
Update the Client interface, the mock, and callers accordingly.
* [client] fix Start/Stop race by making the run loop own engine shutdown
ConnectClient.Stop stopped the engine directly while the run loop's
backoff cycle could still be starting an engine, so Engine.close raced
Engine.Start (e.g. firewall setup reading wgInterface while close nils
it). embed.Client.Start's rollback only avoided a deadlock by cancelling
before Stop; the race itself remained and was caught by -race.
Make the run loop the sole owner of engine shutdown: derive the run
context in NewConnectClient, and have Stop cancel it and wait for the
loop to exit (skipping the wait when the loop never ran) instead of
calling engine.Stop. The loop now always stops the engine on its way
out, dropping the unsynchronised wgInterface check it used to guard that
call. Self-calls from within the loop use runCancel to avoid waiting on
themselves.
embed keeps a defensive pre-Stop cancel(); the daemon's cleanupConnection
gets a TODO to adopt Stop() rather than stopping the engine in parallel.
* [client] init context state in engine tests
Engine tests built the engine context with context.WithCancel(
context.Background()), omitting CtxInitState. Now that the run context
is created in the constructor, the wgIfaceMonitor goroutine can reach
triggerClientRestart during teardown, which calls CtxGetState and
panics on the missing state. Real entry points (up, embed, service)
always CtxInitState; only the tests skipped it.
* [client] interrupt connect backoff on context cancel
The run loop retried with a raw ExponentialBackOff, so a backoff sleep
ignored context cancellation. Now that ConnectClient.Stop waits for the
run loop to exit, a cancel landing during a sleep would block Stop for
the full interval (up to MaxInterval). Wrap the backoff with the run
context so Retry returns promptly on cancel; the retry budget itself
(MaxElapsedTime) is unchanged.
* [client] bound WaitStreamConnected in signal client tests
The tests waited on WaitStreamConnected with context.Background() and the
client's own context was also Background, so a stream that never connects
would hang until the suite timeout. Pass a 5s timeout context and assert
StreamConnected afterwards so the tests fail fast with a clear reason.
* [client] fix WaitStreamConnected stale-channel race
The StreamConnected check and the wait-channel creation took the mutex
separately, so notifyStreamConnected could set the status and close/clear
connectedCh in between: the waiter then created a fresh channel nobody
would ever close and blocked forever. Also, the status read was unlocked
while notify wrote it under the mutex (a data race). Do the check and the
channel fetch in one locked section; drop the now-unused
getStreamStatusChan helper. Pre-existing bug, not introduced by this branch.
* [client] abort Start if context cancelled while waiting for signal stream
receiveSignalEvents blocks in WaitStreamConnected until the signal stream
connects or the context is cancelled. If Stop cancelled e.ctx while Start
was parked there, Start kept going: it started the remaining subsystems on
a cancelled context and marked a shutting-down engine as started. Return
the context error from receiveSignalEvents and propagate it from Start, so
the deferred cleanup runs and the cancellation reaches the caller.
* [client] clean up all started components on Start failure
Start's failure defer only called close(), which covers the wg interface,
firewall, rosenpass and port forwarding but leaves connMgr, srWatcher,
route/DNS/flow/state managers and the monitor goroutines running. A late
failure (e.g. the context-cancelled check after the signal stream) thus
leaked them.
Extract Stop's locked teardown into stopLocked (caller holds syncMsgMux,
does not wait on shutdownWg) and call it from both Stop and Start's defer.
The defer also cancels the run context first so goroutines started before
the failure unwind. Teardown order is unchanged.
* Migrate to profile ids
* Migrate android profile manager
* Clean up
* Fix review
* Add ID type
* Fix test and runes in ShortID()
* Fix profile switch on up and android comments
* Revert android profile to string id
* Fix feedback
* Fix UI feedback
* Fix id assignment
* Add renaming of profiles
* Fix review
* Remove ui binary
* Fix getProfileConfigPath not validating id
* Change resolve handle order and fix server merge problems
* Fix mdm test
* Initial scaffolding
* Applies MDM override
* Unit tests
* Helpers business logic
* Return error if trying to modify any config that is gated by MDM
* Add ManagedFields to returned config over GetConfig
* Adds initial 101 MDM policy business logic testing
* gRPC MDM changes
* MDM Name scoping for clarity
* Implements windows loading of MDM policy
* Adds missing WGPort config
* Cleanup setupKey to align to linear
* Align split tunnel code
* Adds some log
* Prefix every log with MDM
* Adds debug config cobra command
This can be useful for troubleshooting and checking config
now that its resolution is not trivial
defaults > config > env cars > CLI/UI > MDM
* Adds MDM 1m diff checker & reloader
* Adds also up/start after cancel
* Publishes event for UI to sync upon MDM changes
* Add events to resync UI to actual config
This also provide fixup for UI no aligning to changed config when coming from cli up with config flags.
* UI behavior conflicts relaxation
UI sends full config snapshot with all values. It doesn't
make sense to block it if the values are aligned with the
values constrained by the MDM policy. It's just simplier
to allow values that are compliant. (this goes for the CLI
as well at this point)
* Lock toggle Settngs
* Advanced Settings locking
* Fixup presharedkey
* Apply MDM locks
* Toggle gray in/out for Advanced Settings
* Adds support for disabling of Profiles and UpdateSettings feature flags
* Adds Gate Login as well when --disable-update-settings=true is given to service
This commit tries to settle things with an old PR-4237 which had relaxed
the case where the SetConfig returned an `Unavailable` code error.
Under this circumnstance the PR allowed the upFunc to just emit a warning and
progress further with the login gRPC. Since the login call is consuming
the --management-url coming from the `up` command, it might be possible
to abuse the "Unavailable" code to inject a management URL that is different
from the configured one even though the --disable-update-settings is set
to true (?)
* Evaluate disable-update-settings errors only when there's an actual override
* [UI] Fixup advanced Settings
* [UI] Fixup for preshared key
* [UI] Fixup for profile enable/disable toggle
We need to align the initial state to evaluate the delta in case.
The initial state has to be "true" since the profile starts visible.
Then we receive MDM and transition the cache bool value to the actual
MDM imposed state
* Enforces disable networks
* [UI] Aligns to "enable/disable once on change only"
* Fixup: MDM wins. always
* Removes --disable-advanced-settings
It was a typo in our meetings. the actual thing is --disable-update-settings
* [PROTO] Removes --disable-advanced-settings
* [UI] Removes --disable-advanced-settings
* Pins feat profile retrieval to notif event
* [UI] Fix for "hide" not working when propagating to parent with children
* Adds dep for reading plist files
* Introduces support for darwing plist loading
* Tests MDM config reload via ticker
* [PROVISIONING] ADMX/ADML/PS/bash scripts/templates
* CI fixes
- Add docstrings to `mdm_integration`
- refactor for cognitive complexity
- mod tidy
* Linting
* Add docstrings to `mdm_integration`
* nil,nil is no policy and no error. Allow it
* nil,nil is no policy and no error. Allow it
* exclude MDM profile adminstrated keys data from debug bundle
* Fixes Rosenpass left disable after MDM unlock
* Partial revert coderabbit added docstrings
* Renaming fix
* Avoid locking on clientRunning bool when the connection is aborted for whatever reason
We want to just signal this through the giveUpChan, we will manage the signal from
the waiter side and in case set it to false there. THis way we avoid locking,
which should allow the MDM down+wait_for_term_chan_signal_+up procedure
clientRunning is used to signal two different conditions here:
1. the initialization procedure is over (we have an engine)
2. the connection being up (or being attempted)
Probably these two functionalities should not alias, and the failure of the second condition
(because of any error) should just drive a reconnection (currently it's not happening,
and we silently go idle).
OR, mor probably, the two things are the SAME and there should not exist a case where
we did the "Up" initialization and connection attempt but we are not still attempting it.
* Moves test helper at te very bottom
* Addresses github comments
* No lock no copy
* Prevents engine not stopping within 10 secs from being paired by another instance
We instead juts SKIP updating the policy, so
1. the MDM ticker will kick in 1 minute time,
2. find the policy misaligned,
3. enter the onMDMPolicyChange,
4. find the s.clientRunning == true
(because it is set to false only in server cleanupConnection,
and not by s.actCancel())
5. call s.actCancel() again if not nil
6. immediately return from <-s.clientGiveUpChan
7. finally call s.restartEngineForMDMLocked()
* Since we ARE running there should be a config
If the config was cancelled midflight, connect will abort later on
* DisableAutoConnect should not stop a running connection.
DisableAutoConnect should just avoid the connection attempts *when the service starts*.
If we are started and we are up and running, DisableAutoConnect should not kick in.
Another PR will follow about this topic
* Removes unused vars
* Moves callback into Run method arg
* align comment to removal of DisableAutoConnect
DisableAutoConnect should just avoid the connection attempts *when the service starts*.
If we are started and we are up and running, DisableAutoConnect should not kick in
* Removes unused managed_fields data.
This was initially used to drive the UI but approach changed
to reload config/features upon notifications which makes this data redundant.
* Reorder stuff
* Unexport unrequired vars/functions
PoliciesEqual → policiesEqual
AllKeys → allKeys
* Adds list of MDM managed fields in the debug bundle
Auto-update logic moved out of the UI into a dedicated updatemanager.Manager service that runs in the connection layer. The
UI no longer polls or checks for updates independently.
The update manager supports three modes driven by the management server's auto-update policy:
No policy set by mgm: checks GitHub for the latest version and notifies the user (previous behavior, now centralized)
mgm enforces update: the "About" menu triggers installation directly instead of just downloading the file — user still initiates the action
mgm forces update: installation proceeds automatically without user interaction
updateManager lifecycle is now owned by daemon, giving the daemon server direct control via a new TriggerUpdate RPC
Introduces EngineServices struct to group external service dependencies passed to NewEngine, reducing its argument count from 11 to 4
* [client] Fix exit node menu not refreshing on Windows
TrayOpenedCh is not implemented in the systray library on Windows,
so exit nodes were never refreshed after the initial connect. Combined
with the management sync not having populated routes yet when the
Connected status fires, this caused the exit node menu to remain empty
permanently after disconnect/reconnect cycles.
Add a background poller on Windows that refreshes exit nodes while
connected, with fast initial polling to catch routes from management
sync followed by a steady 10s interval. On macOS/Linux, TrayOpenedCh
continues to handle refreshes on each tray open.
Also fix a data race on connectClient assignment in the server's connect()
method and add nil checks in CleanState/DeleteState to prevent panics
when connectClient is nil.
* Remove unused exitNodeIDs
* Remove unused exitNodeState struct
Capture engine reference before actCancel() in cleanupConnection().
After actCancel(), the connectWithRetryRuns goroutine sets engine to nil,
causing connectClient.Stop() to skip shutdown. This allows the goroutine
to set ErrResetConnection on the shared state after Down() clears it,
causing the next Up() to fail.
Up() acquired s.mutex with a deferred unlock, then called waitForUp()
while still holding the lock. waitForUp() blocks for up to 50 seconds
waiting on clientRunningChan/clientGiveUpChan, starving all concurrent
gRPC calls that require the same mutex (Status, ListProfiles, etc.).
Replace the deferred unlock with explicit s.mutex.Unlock() on every
early-return path and immediately before waitForUp(), matching the
pattern already used by the clientRunning==true branch.
CLI: new expose command to publish a local port with flags for PIN, password, user groups, custom domain, name prefix and protocol (HTTP default).
Management/API: create/renew/stop expose sessions (streamed status), automatic naming/domain, TTL renewals, background expiration, new management RPCs and client methods.
UI/API: account settings now include peer_expose_enabled and peer_expose_groups; new activity codes for peer expose events.
could interleave with a sleep/wake event causing out-of-order state
transitions. The mutex now covers the full duration of each handler
including the status check, the Up/Down call, and the flag update.
Note: if Up or Down commands are triggered in parallel with sleep/wake
events, the overall ordering of up/down/sleep/wake operations is still
not guaranteed beyond what the mutex provides within the handler itself.
* Consolidate authentication logic
- Moving auth functions from client/internal to client/internal/auth package
- Creating unified auth.Auth client with NewAuth() constructor
- Replacing direct auth function calls with auth client methods
- Refactoring device flow and PKCE flow implementations
- Updating iOS/Android/server code to use new auth client API
* Refactor PKCE auth and login methods
- Remove unnecessary internal package reference in PKCE flow test
- Adjust context assignment placement in iOS and Android login methods
When Down() and Up() are called in quick succession, the connectWithRetryRuns goroutine could set ErrResetConnection after Down() had cleared the state, causing the subsequent Up() to fail.
Fix by waiting for the goroutine to exit (via clientGiveUpChan) before Down() returns. Uses a 5-second timeout to prevent RPC timeouts while ensuring the goroutine completes in most cases.
- Connect on daemon start only if the file existed before
- fixed a bug that happened when the default profile config was removed, which would recreate it and reset the active profile to the default.
riccardom
