* Updates rosenpass version
go-rosenpass v0.4.0 → v0.5.42 bump — detailed findings
Change summary
cunicu.li/go-rosenpass v0.4.0 → v0.5.42 (target)
cilium/ebpf v0.15.0 → v0.19.0 (transitive)
gopacket/gopacket v1.1.1 → v1.4.0 (transitive)
wireguard 2023-07 → 2023-12 (transitive)
wireguard/wgctrl 2023-04 → 2024-12 (transitive)
Wire interop
v0.4.0 (in v0.70.5) <-> v0.5.42 OK
v0.5.42 <-> v0.5.42 OK
Quantum resistance: true both ends
---
**Replay error eliminated.**
Before (on v0.4.0):
`ERROR Failed to handle message: failed to load biscuit (ICR1): detected replay`
Recurring every ~50ms for minutes at a time. Gone entirely after both ends upgraded to v0.5.42. Upstream fix in biscuit/replay handling between v0.4.x and v0.5.x series.
* Fixup [::]:port socket trying to send to v4
* Adds more tests on netbird<->rosenpass interactions
* Anticipates rp handler creation before generateConfig
* [client] Moves deterministic key gen into rosenpass
* go mod tidy
* Adds reminder to reason about rosenpass surface area
* Apply code rabbit suggestions
Adds a new "private" service mode for the reverse proxy: services reachable exclusively over the embedded WireGuard tunnel, gated by per-peer group membership instead of operator auth schemes.
Wire contract
- ProxyMapping.private (field 13): the proxy MUST call ValidateTunnelPeer and fail closed; operator schemes are bypassed.
- ProxyCapabilities.private (4) + supports_private_service (5): capability gate. Management never streams private mappings to proxies that don't claim the capability; the broadcast path applies the same filter via filterMappingsForProxy.
- ValidateTunnelPeer RPC: resolves an inbound tunnel IP to a peer, checks the peer's groups against service.AccessGroups, and mints a session JWT on success. checkPeerGroupAccess fails closed when a private service has empty AccessGroups.
- ValidateSession/ValidateTunnelPeer responses now carry peer_group_ids + peer_group_names so the proxy can authorise policy-aware middlewares without an extra management round-trip.
- ProxyInboundListener + SendStatusUpdate.inbound_listener: per-account inbound listener state surfaced to dashboards.
- PathTargetOptions.direct_upstream (11): bypass the embedded NetBird client and dial the target via the proxy host's network stack for upstreams reachable without WireGuard.
Data model
- Service.Private (bool) + Service.AccessGroups ([]string, JSON- serialised). Validate() rejects bearer auth on private services. Copy() deep-copies AccessGroups. pgx getServices loads the columns.
- DomainConfig.Private threaded into the proxy auth middleware. Request handler routes private services through forwardWithTunnelPeer and returns 403 on validation failure.
- Account-level SynthesizePrivateServiceZones (synthetic DNS) and injectPrivateServicePolicies (synthetic ACL) gate on len(svc.AccessGroups) > 0.
Proxy
- /netbird proxy --private (embedded mode) flag; Config.Private in proxy/lifecycle.go.
- Per-account inbound listener (proxy/inbound.go) binding HTTP/HTTPS on the embedded NetBird client's WireGuard tunnel netstack.
- proxy/internal/auth/tunnel_cache: ValidateTunnelPeer response cache with single-flight de-duplication and per-account eviction.
- Local peerstore short-circuit: when the inbound IP isn't in the account roster, deny fast without an RPC.
- proxy/server.go reports SupportsPrivateService=true and redacts the full ProxyMapping JSON from info logs (auth_token + header-auth hashed values now only at debug level).
Identity forwarding
- ValidateSessionJWT returns user_id, email, method, groups, group_names. sessionkey.Claims carries Email + Groups + GroupNames so the proxy can stamp identity onto upstream requests without an extra management round-trip on every cookie-bearing request.
- CapturedData carries userEmail / userGroups / userGroupNames; the proxy stamps X-NetBird-User and X-NetBird-Groups on r.Out from the authenticated identity (strips client-supplied values first to prevent spoofing).
- AccessLog.UserGroups: access-log enrichment captures the user's group memberships at write time so the dashboard can render group context without reverse-resolving stale memberships.
OpenAPI/dashboard surface
- ReverseProxyService gains private + access_groups; ReverseProxyCluster gains private + supports_private. ReverseProxyTarget target_type enum gains "cluster". ServiceTargetOptions gains direct_upstream. ProxyAccessLog gains user_groups.
The Status recorder used to fire notifier callbacks while holding d.mux:
- notifyPeerListChanged / notifyPeerStateChangeListeners ran from inside
the locked section of every Update*/AddPeerStateRoute/etc.
- notifyAddressChanged ran from UpdateLocalPeerState and CleanLocalPeerState
while d.mux was held.
- onConnectionChanged was registered with a defer above defer d.mux.Unlock,
so it executed before the mutex was released in the Mark*Connected/
Disconnected helpers.
- notifyPeerStateChangeListeners did a blocking channel send under d.mux,
so a slow subscriber stalled every other d.mux holder.
A listener that re-enters the recorder (e.g. calls GetFullStatus from
within a callback) deadlocks against d.mux, and any callback that takes
longer than expected stalls every other state query for its duration.
Capture the values needed for notification under the lock, release d.mux,
then call the notifier. Build per-peer router-state snapshots inside the
lock and dispatch them via dispatchRouterPeers afterwards. The router-peer
channel send stays blocking, but now happens outside d.mux so a slow
consumer cannot stall any other d.mux holder, and no peer state
transitions are silently dropped.
The notifier itself is unchanged: its internal state was already protected
by its own locks, and the field d.notifier is set once in NewRecorder and
never reassigned, so reading it without d.mux is safe.
Also fix a pre-existing race in Test_notifier_RemoveListener /
Test_notifier_SetListener: setListener spawns a goroutine that writes
listener.peers, but the tests read listener.peers without waiting for it.
* [relay] evict foreign client cache on disconnect
When a foreign relay's TCP connection drops, the manager's
onServerDisconnected handler only triggered reconnect logic for the
home server; the disconnected foreign entry stayed in the relayClients
cache. Subsequent OpenConn calls reused the closed client until the
60-second cleanup tick evicted it, breaking peer connectivity through
that relay for up to a minute.
Evict the foreign entry from the cache on disconnect so the next
OpenConn dials a fresh client.
Also:
- Make the reconnect backoff cap configurable via WithMaxBackoffInterval
ManagerOption; the previous hard-coded 60s constant forced
TestAutoReconnect to sleep ~61s. Test now polls Ready() and finishes
in ~2s.
- Add NB_HOME_RELAY_SERVERS env var that overrides the relay URL list
received from management, so a peer can be pinned to a specific home
relay (used by the netbird-conn-lab Edge 4 reproducer).
* [client] treat empty NB_HOME_RELAY_SERVERS as unset
Returning (urls=[], ok=true) when the env var contained only separators or
whitespace caused callers to wipe the mgmt-provided relay list, leaving the
peer with no relays. Treat a parsed-empty result the same as an unset env.
* [debug] fix port collision in TestUpload
TestUpload hardcoded :8080, so it failed deterministically when anything
was already on that port and collided across concurrent test runs.
Bind a :0 listener in the test to get a kernel-assigned free port, and
add Server.Serve so tests can hand the listener in without reaching
into unexported state.
* [debug] drop test-only Server.Serve, use SERVER_ADDRESS env
The previous commit added a Server.Serve method on the upload-server,
used only by TestUpload. That left production with an unused function.
Reserve an ephemeral loopback port in the test, release it, and pass
the address through SERVER_ADDRESS (which the server already reads).
A small wait helper ensures the server is accepting connections before
the upload runs, so the close/rebind gap does not cause a false failure.
Viktor Liu