A successful Login reaches terminalLoginError with a nil error, and nothing
covered that. It happens to work on grpc v1.80.0 — gstatus.FromError(nil)
answers (nil, true), and Status.Code tolerates a nil receiver by returning
codes.OK, which is not in the terminal set — but that is a chain of internal
details to be relying on for the common path, and none of it was asserted.
Now the nil error is handled where it is obvious, and the table covers it.
Reported by CodeRabbit on PR #7398, which called it a panic; measured on
v1.80.0 it is not one. The gap was the untested reliance, not a crash.
`netbird up` and `netbird login` both run Login through the backoff cycle, and
each carried its own copy of the list of codes that end it. Only up.go learned
about codes.FailedPrecondition, so a refused `netbird login` kept retrying and
then reported "login backoff cycle failed" instead of what the daemon said.
terminalLoginError is now that list, once, next to WithBackOff — the duplicated
copies are what let the two commands disagree in the first place.
Reported by cubic-dev-ai on PR #7398.
With the update-settings kill switch on, `netbird up --enable-rosenpass`
connected and said almost nothing: SetConfig refused the change, the CLI
downgraded that to a warning, and Login carries no rosenpass field to apply, so
the flag was silently dropped. The setting stayed disabled, which is the point
of the switch, but the caller was never told their request had been ignored.
The refusal now travels as codes.FailedPrecondition instead of
codes.Unavailable, and the CLI fails on it. Unavailable means "the daemon
cannot serve this call", which is why the CLI downgraded it and why
client/ui/services reads it as an unreachable daemon — both wrong for a daemon
that answered and refused. FailedPrecondition also matches what the MDM gate
already returns for a managed field, so both refusals are now one class of
error, and it is added to the login backoff's early-exit codes so a refused
login stops instead of retrying for 30s.
This does not put the container back in the deadlock: with the value-aware
gate, a client restating its own configuration is not refused at all, so
nothing reaches this path unless a real change was asked for.
- Login logged the active-profile-state error and returned the same cause; the
repo's guidelines call for one or the other, and the wrapped error is the one
that carries context. (CodeRabbit)
- `netbird up` reported a codes.Unavailable SetConfig failure as "the daemon
refused the settings update", but that code also covers a daemon that became
unreachable. It now reports what the daemon said without asserting why.
(cubic-dev-ai)
- TestLogin_ChangingTheManagementURLIsRefused asserted the error and nothing
else, while "refused before it can touch daemon state" is the contract. It now
checks the stored management URL, the in-progress login and the active profile,
matching its SetConfig counterpart. (cubic-dev-ai)
ReadConfig and GetConfig differed in one thing — what happens when the file is
absent — and neither name said which was which:
- ReadConfig -> ReadOrGenerateConfig (reads it, or generates one in memory)
- GetConfig -> GetExistingConfig (reads it, or fails)
Three comments went with them:
- GetConfig's said "return with Config and if it was created. Errors out if it
does not exist", which described a bool it does not return and a creation it
never performs.
- ReadConfig's explained that it does not write, which is what a reader is
supposed to do anyway.
- Server.getConfig's said it "errors out if it does not exist", which it does
not — it resolves a default config, and now provisions the identity too.
Reading a config wrote it back. profilemanager.readConfig persisted whatever
apply() had filled in, and ReadConfig created and wrote the file outright when
it was absent, so every reader was quietly a writer: a gate deciding whether to
refuse a request, a UI listing profiles, a mobile getter reading one preference.
The previous commit worked around that with a PeekConfig variant, which left
two read functions with opposite side effects and the antipattern still there
for everyone else.
Only one thing in a read genuinely had to be persisted: apply() generated the
WireGuard and SSH keys when it found them empty, and a generated key cannot be
recomputed — losing it means the peer comes back with a different identity and
registers again. Everything else apply() fills in is a deterministic default
that the next read recomputes anyway.
So identity provisioning is now its own step, Config.EnsureIdentity, and the
callers that provision write the result out themselves, in the open:
- Server.getConfig, the daemon's provisioning point;
- the CLI's foreground login, which is about to dial management;
- update() / directUpdate(), the config write paths — a stored profile can
legitimately carry no identity, since a mobile logout clears the keys in
place, and the next write is what has to mint a new one.
ReadConfig and GetConfig no longer write anything, PeekConfig is gone, and the
dry-run baseline no longer needs placeholder keys to keep apply() from minting
real ones.
One deliberate leftover: readConfig still calls util.EnforcePermission, which
chmods a config file whose permissions are too broad. It changes no content and
is idempotent, and dropping it would leave a legacy file world-readable until
its first write.
The update-settings kill switch (--disable-update-settings /
NB_DISABLE_UPDATE_SETTINGS / the MDM DisableUpdateSettings key) forbids
changing settings, but it decided what a "change" was by looking at
whether a field was present in the request. The CLI fills the whole
config surface of SetConfigRequest and LoginRequest from its flags and
environment on every `netbird up` (setupSetConfigReq in cmd/up.go), so a
client configured by environment restates its own configuration on every
start and tripped the gate every time.
SetConfig only warned about that, but Login carries the same fields and
was gated the same way, and Login runs inside the CLI's backoff loop: the
daemon answered every attempt with codes.Unavailable, `netbird up` never
completed, and a container with NB_DISABLE_UPDATE_SETTINGS plus any
config env var (NB_MANAGEMENT_URL, for one) could not come up at all.
Both gates now compare values. Config.WouldChange is the dry-run half of
UpdateConfig: it runs the very same diff logic (Config.apply) against a
copy of the stored config, so the gate cannot drift from what an actual
update would do, nor go stale when a field is added. A request that
restates what the profile already holds changes nothing and is allowed; a
request that diverges is refused exactly as before, and a dry run that
cannot be evaluated fails closed. A profile with no config on disk yet is
judged against the config the daemon would create for it.
For Login, the compared input comes from loginOverridesInput, which
persistLoginOverrides also uses to perform the write, so the gate judges
precisely the two fields a login can persist (management URL, pre-shared
key) and no field it ignores.
Two adjacent defects surfaced while making the comparison exact:
- Config.apply compared URLs as raw strings, so the same endpoint spelled
without its default port ("https://api.netbird.io" vs
"https://api.netbird.io:443") counted as a new value and rewrote the
config. It now compares the parsed forms.
- UpdateConfig did not collapse the redacted pre-shared key, unlike
UpdateOrCreateConfig and DirectUpdateConfig, so a UI round-trip of the
mask replaced the stored key with asterisks.
The CLI warning for a refused SetConfig said the method was not available
in the daemon, which sent people looking for a version mismatch that was
not there; it now reports the refusal.
This introduces a disabled-by-default allow-remote-jobs setting that
controls whether the management server may run jobs (such as debug
bundles) on a peer. The flag propagates end to end: through client
configuration, the daemon SetConfig and Login requests, authentication,
and system info, up to management, where it is stored on the peer and
exposed on the peers API as remote_jobs_allowed. The client refuses any
management-requested job unless the peer has opted in. Because enabling
remote jobs crosses the user-to-root boundary, turning it on requires
privilege, mirroring the SSH-server gate. Administrators can enforce the
setting through MDM policy on both macOS and Windows, and MDM can also
override the debug-bundle upload URL. The change ships policy
documentation and generated profile templates, and adds configuration,
conflict, and enforcement tests covering the opt-in, privilege, and MDM
paths.
* [client] Resolve profiles for the sudo invoking user instead of root
The SSH server flags force `netbird up` through sudo, but the CLI resolved
every per-user path with the process user. As root that reads root's own
(empty) local state, so a `sudo netbird up` silently switched the daemon from
the user's profile to the default one — cancelling any login already waiting
in the browser — and then ran an SSO login for the default profile's config.
Whichever account that login returned, the default profile's peer belongs to
someone else, so every attempt ended in "peer is already registered by a
different User or a Setup Key", with nothing telling the user why.
Resolve the acting user through SUDO_USER when running as root: the active
profile, the profile config paths and the stored account email now come from
the invoking user's directories. Privilege decisions are untouched — they stay
on the kernel credentials of the daemon connection, which an environment
variable can never influence; a forged SUDO_USER only selects a profile root
could select anyway.
The invoking user's directories are strictly read-only under sudo. Anything
root wrote there would be root-owned and break the user's own runs, so instead
of chowning files back, the local writes are skipped: the active-profile
bookkeeping and the account-email state simply do not update from a sudo run
(the daemon records the switch on its side; a skipped email write costs at
most one extra account prompt later).
Plain root — no sudo context — has no user to act for, so the ambiguity is
refused instead of guessed at: when the daemon's active profile differs from
what root resolves and no --profile was given, up fails with a message naming
both profiles, instead of silently switching the daemon and failing later with
the ownership error.
* [client] Act on the daemon-resolved profile and fail closed in the root guard
Under sudo the local active-profile mirror is not updated, so up/login
re-reading it after a profile switch acted on the previous profile; use
the daemon-resolved ID directly instead. The plain-root guard now runs
after the readiness wait, denies on lookup errors and empty responses,
and matches the owning username as well; an unowned profile (fresh
install) and a daemon predating the RPC stay allowed. Write-skip
decisions key off the sudo environment alone so a transient user lookup
failure cannot turn a run into writing root-owned files into the user's
directory, and RemoveProfileState honors the read-only rule too.
* [client] Return a wrapped error instead of double-reporting the dial failure
* [client] Read the profile from the daemon when the local mirror is not authoritative
Under sudo without --profile, `up` took the active profile from the invoking
user's local active_profile.txt mirror and drove the daemon to it. But that
mirror is never written under sudo (the SwitchProfile write is a no-op), so it
goes stale after any --profile run and silently switches the daemon back to the
mirror's default. The plain-root guard was meant to refuse exactly this
ambiguity but only ran for plain root, never for the sudo case the fix targets.
When there is no --profile and the mirror is not authoritative (sudo or plain
root), take the profile the daemon already holds for the invoking user instead
of the stale mirror: stay on the user's current profile when the daemon owns it
(or it is unowned, as on a fresh install), and refuse with a --profile hint when
the daemon is on another user's profile. A daemon predating the RPC keeps the
mirror-derived profile.
Reproduce (before this change):
1. As a non-root user misha, with the daemon installed and running:
sudo netbird up --profile work
misha connects on the `work` profile.
2. Because the local mirror write is skipped under sudo,
~misha/.config/netbird/active_profile.txt still says `default` (or is still
absent, which also resolves to `default`).
3. Run a bare:
sudo netbird up
The CLI reads `default` from the frozen mirror and sends ProfileName=default;
the daemon silently switches away from `work` and brings the tunnel up on
`default` — a different account/peer than the one last chosen, with no
warning. After this change step 3 stays on `work`.
* [client] Return a sentinel error instead of nil-nil for the missing daemon RPC
* [client] Load the extend-session hint from the resolved profile
* [client] Fail closed instead of reading root's config when the sudo user lookup fails
* [client] Fail closed in InvokingUser when the sudo user lookup fails
A previous change made baseConfigDir fail closed when SUDO_USER cannot be
resolved, but InvokingUser still fell through to user.Current(). Those two
guards disagreed: the active-profile mirror and the email state refused to
read root's directory, while every profile-path caller happily resolved as
root.
The consequence of a transient NSS failure under sudo was that
Profile.FilePath resolved through getConfigDirForUser("root"), creating
/var/lib/netbird/root and reading the profile JSON from there, and the CLI
sent Username "root" to the daemon in SetConfig and ListProfiles, so the
daemon resolved the same phantom namespace. The invoking user was silently
moved onto a root-owned profile instead of being told the lookup failed.
Fail closed at the single source of the fallback. getConfigDirForUser is
left alone on purpose: it is a pure path helper that also serves
daemon-supplied usernames, and under sudo with a successful lookup it must
still create the invoking user's own profile directory.
* Improved residual state restoration during foreground startup and
foreground login, ensuring consistent recovery with stale states.
* Foreground flows now initialize advanced routing so stale routes
are bypassed during login.
- **Wails v3 application** (`client/ui`) with a React + TypeScript + Tailwind frontend replacing the Fyne UI: main connection view, exit-node switcher, networks/peers browser with detail panels, profile management, settings (general, network, SSH, security, troubleshooting, appearance), debug-bundle creation, and a first-run welcome flow.
- **Internationalization**: go-i18n bundle with 9 locales (en, de, es, fr, hu, it, pt, ru, zh-CN) shared between the tray and the frontend.
- **New system tray** implementation with per-platform theme-aware icons, including a native XEmbed host for Linux (`xembed_tray_linux.c`) and a Linux theme watcher.
- **Session handling**: auth session watcher (`client/internal/auth/sessionwatch`), pending login flow, session-expiration dialog and tray notifications, and `netbird login` improvements.
- **Daemon API extensions** (`daemon.proto`): status stream subscription, event stream, networks/exit-node selection endpoints, and richer full status — with probe throttling on the daemon side to protect against UI-driven request storms.
- **UI preferences store** persisted per profile, autostart management via the daemon (single source of truth in HKCU on Windows).
- **Build system**: Taskfile-based builds per platform (macOS, Linux, Windows), Docker cross-compilation images, MSIX/NSIS/nfpm/AppImage packaging, and a new `frontend-ui` CI workflow.
Co-authored-by: Zoltan Papp <zoltan.pmail@gmail.com>
Co-authored-by: Eduard Gert <kontakt@eduardgert.de>
Co-authored-by: braginini <bangvalo@gmail.com>
Co-authored-by: Pascal Fischer <32096965+pascal-fischer@users.noreply.github.com>
Co-authored-by: riccardom <riccardomanfrin@gmail.com>
* [client] categorize root/system-mutating tests behind a privileged build tag
Tests that need root or mutate host state (nftables/iptables/DNS, TUN/WireGuard
interfaces, routes, eBPF, SSH/service install) are now gated behind a
//go:build privileged tag. The default `go test ./client/...` runs as a non-root
user with no sudo and leaves host networking untouched; mixed files were split so
pure-logic tests stay in the default suite.
A self-hosting ory/dockertest/v4 harness (client/testutil/privileged) runs the
privileged suite inside a --privileged --cap-add=NET_ADMIN container via
`make test-privileged`; a DOCKER_CI=true guard skips the spawn when already inside
the container. Added `make test-unit` for the host-safe run.
* [client] add PRIV_RUN/PRIV_PKGS filters to the privileged test harness
The dockertest harness now reads two optional env vars when building the
in-container `go test` command: PRIV_RUN adds a -run test-name filter and
PRIV_PKGS overrides the package list. Both empty reproduce the full privileged
suite, so CI and `make test-privileged` behave as before. Lets a developer run a
single privileged test in the container, e.g.:
PRIV_RUN=TestNftablesManager PRIV_PKGS=./client/firewall/nftables/... make test-privileged
* [client] fix unused-helper lint after the privileged test split
Splitting privileged tests into *_privileged_test.go left their shared helpers in
the untagged files, so in the default (no-tag) build they had no callers and
golangci-lint flagged them as unused.
Moved the privileged-only helpers into the privileged files next to their callers
(generateDummyHandler; createEngine/startSignal/startManagement/getConnectedPeers/
getPeers + kaep/kasp; (*mockDaemon).setJWTToken). Annotated the shared routing-test
fixtures that must stay untagged for cross-platform compilation with //nolint:unused
(systemops_bsd expected* vars, ensureIPv6DefaultRoute on bsd/windows,
loopbackIfaceWindows), matching the existing linux variant.
* [client] fix privileged test CI failures and run the harness on macOS
The host-safe unit run dropped sudo but two privileged test groups were
never tagged, and the Docker privileged job silently never ran the suite:
- Gate the ssh/server PrivilegeDropper command-construction tests behind
the privileged tag (they require root to target a different UID); split
them into executor_unix_privileged_test.go.
- Tag sharedsock raw-socket tests privileged (need CAP_NET_RAW).
- Fix the Docker job command: nested single quotes around the build tags
closed the sh -c wrapper early, dropping the go list package set and the
privileged tag, so go test ran on the empty repo root. Use double quotes.
Make the self-hosting harness usable from a dev Mac:
- Build it on darwin as well as linux; it only drives Docker.
- Resolve the active docker context endpoint into DOCKER_HOST when the
default /var/run/docker.sock is absent (Docker Desktop, Colima, OrbStack).
- Rename the misspelled containerGoModache constant to containerGoModCache.
* Update client/internal/engine_privileged_test.go
Co-authored-by: coderabbitai[bot] <136622811+coderabbitai[bot]@users.noreply.github.com>
* Update client/internal/routemanager/systemops/systemops_linux_test.go
Co-authored-by: coderabbitai[bot] <136622811+coderabbitai[bot]@users.noreply.github.com>
* Update client/internal/routemanager/systemops/systemops_windows_test.go
Co-authored-by: coderabbitai[bot] <136622811+coderabbitai[bot]@users.noreply.github.com>
* Update client/server/server_privileged_test.go
Co-authored-by: coderabbitai[bot] <136622811+coderabbitai[bot]@users.noreply.github.com>
* [ci] Run privileged-tagged tests on darwin, windows and freebsd
The privileged build tag split moved root/system-mutating tests behind
//go:build privileged, but only the linux docker job was given the tag.
The native darwin (sudo), windows (PsExec64 -s) and freebsd VM runners
already have the required privileges, so add the privileged tag there too
to keep CI running the same set of tests as before the split.
* [ci] Exclude dockertest harness from the darwin privileged run
The privileged tag now compiles client/testutil/privileged on darwin, whose
TestRunPrivilegedSuiteInDocker spawns a container the macOS runner has no
Docker for. Exclude the harness package from the darwin list, matching the
linux job, so the privileged tests run in place without a container spawn.
---------
Co-authored-by: coderabbitai[bot] <136622811+coderabbitai[bot]@users.noreply.github.com>
* Restores behavior to create profile if not there on Up
* Allows to restore nerbird status showing of the profile name
* [client] Reduce upFunc cognitive complexity
Extract the profile switch/auto-create logic from upFunc into a dedicated
switchOrCreateProfile helper. The inlined NotFound-retry branch pushed
upFunc over SonarCloud's cognitive complexity threshold (S3776).
No behavior change.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
* [client] Make up --profile auto-create idempotent under concurrent runs
Don't fail switchOrCreateProfile on a createProfile error: a concurrent
run may create the profile between the NotFound check and our create
call. Retry the switch regardless and only surface the create error if
the switch also fails. Addresses CodeRabbit race-condition feedback.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
* Share createProfile with addProfileFunc
* But allow conn reusage
* moves switchOrCreateProfile to where it's used
---------
Co-authored-by: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
* Migrate to profile ids
* Migrate android profile manager
* Clean up
* Fix review
* Add ID type
* Fix test and runes in ShortID()
* Fix profile switch on up and android comments
* Revert android profile to string id
* Fix feedback
* Fix UI feedback
* Fix id assignment
* Add renaming of profiles
* Fix review
* Remove ui binary
* Fix getProfileConfigPath not validating id
* Change resolve handle order and fix server merge problems
* Fix mdm test
* Initial scaffolding
* Applies MDM override
* Unit tests
* Helpers business logic
* Return error if trying to modify any config that is gated by MDM
* Add ManagedFields to returned config over GetConfig
* Adds initial 101 MDM policy business logic testing
* gRPC MDM changes
* MDM Name scoping for clarity
* Implements windows loading of MDM policy
* Adds missing WGPort config
* Cleanup setupKey to align to linear
* Align split tunnel code
* Adds some log
* Prefix every log with MDM
* Adds debug config cobra command
This can be useful for troubleshooting and checking config
now that its resolution is not trivial
defaults > config > env cars > CLI/UI > MDM
* Adds MDM 1m diff checker & reloader
* Adds also up/start after cancel
* Publishes event for UI to sync upon MDM changes
* Add events to resync UI to actual config
This also provide fixup for UI no aligning to changed config when coming from cli up with config flags.
* UI behavior conflicts relaxation
UI sends full config snapshot with all values. It doesn't
make sense to block it if the values are aligned with the
values constrained by the MDM policy. It's just simplier
to allow values that are compliant. (this goes for the CLI
as well at this point)
* Lock toggle Settngs
* Advanced Settings locking
* Fixup presharedkey
* Apply MDM locks
* Toggle gray in/out for Advanced Settings
* Adds support for disabling of Profiles and UpdateSettings feature flags
* Adds Gate Login as well when --disable-update-settings=true is given to service
This commit tries to settle things with an old PR-4237 which had relaxed
the case where the SetConfig returned an `Unavailable` code error.
Under this circumnstance the PR allowed the upFunc to just emit a warning and
progress further with the login gRPC. Since the login call is consuming
the --management-url coming from the `up` command, it might be possible
to abuse the "Unavailable" code to inject a management URL that is different
from the configured one even though the --disable-update-settings is set
to true (?)
* Evaluate disable-update-settings errors only when there's an actual override
* [UI] Fixup advanced Settings
* [UI] Fixup for preshared key
* [UI] Fixup for profile enable/disable toggle
We need to align the initial state to evaluate the delta in case.
The initial state has to be "true" since the profile starts visible.
Then we receive MDM and transition the cache bool value to the actual
MDM imposed state
* Enforces disable networks
* [UI] Aligns to "enable/disable once on change only"
* Fixup: MDM wins. always
* Removes --disable-advanced-settings
It was a typo in our meetings. the actual thing is --disable-update-settings
* [PROTO] Removes --disable-advanced-settings
* [UI] Removes --disable-advanced-settings
* Pins feat profile retrieval to notif event
* [UI] Fix for "hide" not working when propagating to parent with children
* Adds dep for reading plist files
* Introduces support for darwing plist loading
* Tests MDM config reload via ticker
* [PROVISIONING] ADMX/ADML/PS/bash scripts/templates
* CI fixes
- Add docstrings to `mdm_integration`
- refactor for cognitive complexity
- mod tidy
* Linting
* Add docstrings to `mdm_integration`
* nil,nil is no policy and no error. Allow it
* nil,nil is no policy and no error. Allow it
* exclude MDM profile adminstrated keys data from debug bundle
* Fixes Rosenpass left disable after MDM unlock
* Partial revert coderabbit added docstrings
* Renaming fix
* Avoid locking on clientRunning bool when the connection is aborted for whatever reason
We want to just signal this through the giveUpChan, we will manage the signal from
the waiter side and in case set it to false there. THis way we avoid locking,
which should allow the MDM down+wait_for_term_chan_signal_+up procedure
clientRunning is used to signal two different conditions here:
1. the initialization procedure is over (we have an engine)
2. the connection being up (or being attempted)
Probably these two functionalities should not alias, and the failure of the second condition
(because of any error) should just drive a reconnection (currently it's not happening,
and we silently go idle).
OR, mor probably, the two things are the SAME and there should not exist a case where
we did the "Up" initialization and connection attempt but we are not still attempting it.
* Moves test helper at te very bottom
* Addresses github comments
* No lock no copy
* Prevents engine not stopping within 10 secs from being paired by another instance
We instead juts SKIP updating the policy, so
1. the MDM ticker will kick in 1 minute time,
2. find the policy misaligned,
3. enter the onMDMPolicyChange,
4. find the s.clientRunning == true
(because it is set to false only in server cleanupConnection,
and not by s.actCancel())
5. call s.actCancel() again if not nil
6. immediately return from <-s.clientGiveUpChan
7. finally call s.restartEngineForMDMLocked()
* Since we ARE running there should be a config
If the config was cancelled midflight, connect will abort later on
* DisableAutoConnect should not stop a running connection.
DisableAutoConnect should just avoid the connection attempts *when the service starts*.
If we are started and we are up and running, DisableAutoConnect should not kick in.
Another PR will follow about this topic
* Removes unused vars
* Moves callback into Run method arg
* align comment to removal of DisableAutoConnect
DisableAutoConnect should just avoid the connection attempts *when the service starts*.
If we are started and we are up and running, DisableAutoConnect should not kick in
* Removes unused managed_fields data.
This was initially used to drive the UI but approach changed
to reload config/features upon notifications which makes this data redundant.
* Reorder stuff
* Unexport unrequired vars/functions
PoliciesEqual → policiesEqual
AllKeys → allKeys
* Adds list of MDM managed fields in the debug bundle
* Adds heuristic to detect an edge case on Linux where a system has configured logrotate as a separate service to rotate log files which would mangle our client log files. If we detect logrotate being configured for netbird, we disable our rotation.
* Adds new env var to disable log rotation: NB_LOG_DISABLE_ROTATION
* Adds compressed and plain logrotate files to debug bundle.
* Replaces lumberjack with timberjack (maintained fork with bug fixes and extra features).
* Clarifies which daemon version is running in the bundle stats.
* Change logging for client service status to console
* Refactor to use a common checker for development version
* Adds commit sha to development version for cobra command only
Leave dashboard unaffected
* Adjust for "v0.31.1-dev" test case
which must be considered pre-release
* Drop synthetic "dev"/"0.50.0-dev" firewall feature-gate fixtures
These test cases encoded the loose strings.Contains(v, "dev")
semantics inherited from peerSupportedFirewallFeatures, but
NetbirdVersion() never produces those values — only the literal
"development" (and now "development-<sha>[-dirty]") ever flows
through the wire. The agent owns the semantics of an ephemeral
development build, so the tests should exercise the strings we
actually emit.
Replaced with development, development-<sha> and
development-<sha>-dirty cases that match the HasPrefix("development")
predicate introduced upstream.
* Remove unexistent tests on wire format
The sha / dirty flag are added only when the CLI asks the version.
Account versions is unaffacted and can only strictly match "development"
* Adds tests for IsDevelopmentVersion
* Add support for legacy IDP cache environment variable
* Centralize cache store creation to reuse a single Redis connection pool
Each cache consumer (IDP cache, token store, PKCE store, secrets manager,
EDR validator) was independently calling NewStore, creating separate Redis
clients with their own connection pools — up to 1400 potential connections
from a single management server process.
Introduce a shared CacheStore() singleton on BaseServer that creates one
store at boot and injects it into all consumers. Consumer constructors now
receive a store.StoreInterface instead of creating their own.
For Redis mode, all consumers share one connection pool (1000 max conns).
For in-memory mode, all consumers share one GoCache instance.
* Update management-integrations module to latest version
* sync go.sum
* Export `GetAddrFromEnv` to allow reuse across packages
* Update management-integrations module version in go.mod and go.sum
* Update management-integrations module version in go.mod and go.sum
* [client] Add Expose support to embed library
Add ability to expose local services via the NetBird reverse proxy
from embedded client code.
Introduce ExposeSession with a blocking Wait method that keeps
the session alive until the context is cancelled.
Extract ProtocolType with ParseProtocolType into the expose package
and use it across CLI and embed layers.
* Fix TestNewRequest assertion to use ProtocolType instead of int
* Add documentation for Request and KeepAlive in expose manager
* Refactor ExposeSession to pass context explicitly in Wait method
* Refactor ExposeSession Wait method to explicitly pass context
* Update client/embed/expose.go
Co-authored-by: coderabbitai[bot] <136622811+coderabbitai[bot]@users.noreply.github.com>
* Fix build
* Update client/embed/expose.go
Co-authored-by: coderabbitai[bot] <136622811+coderabbitai[bot]@users.noreply.github.com>
---------
Co-authored-by: Viktor Liu <viktor@netbird.io>
Co-authored-by: coderabbitai[bot] <136622811+coderabbitai[bot]@users.noreply.github.com>
Co-authored-by: Viktor Liu <17948409+lixmal@users.noreply.github.com>
riccardom