4 Commits

Author	SHA1	Message	Date
Riccardo Manfrin	7b22d55bf6	[client] Bind the cached SSH JWT to the local caller that obtained it (#7378) ... * [client] Bind the cached SSH JWT to the local caller that obtained it Record the identity that obtained the token and return it only to that same identity, comparing the account alone: the group set and the elevation flag describe what a token may do rather than who it belongs to, and the same user may call once elevated and once not. A control channel that carries no caller identity gets a miss on read and stores nothing on write, matching how the other ipcauth consumers fail closed. Clear the entry when the session it speaks for ends: logout, down and profile switch. * [client] Cover the profile-switch path of the SSH JWT cache The cache being correct buys nothing if a handler around it forgets to clear it, and SwitchProfile had no test at all. Point the profile globals at a temp dir holding a single default profile, which is the one ActiveProfileState.FilePath resolves without consulting the current OS user, and call SwitchProfile with no request so neither the switch itself nor the profile-list event is involved. * [client] Report the SSH JWT cache in the no-identity startup warning daemonServerOptions already warns once, at startup, about what a control channel with no caller identity gives up. Name the SSH JWT cache there too, on both the TCP and the no-peer-identity-primitive paths. The per-request logs in cachedJWT and WaitJWTToken drop to Debug: the condition is expected and handled on such a channel, the caller simply re-authenticates, and repeating it on every SSH authentication buried the one message that is actionable. * [client] Stop the local-metrics manager leaking out of the profile test localmetrics.NewManager runs a goroutine until its context is done, and the test handed it context.Background(), so the manager outlived the test and stayed in the test binary for every case that followed. * [client] Keep the cached SSH JWT across a down/up cycle Clearing the cache in cleanupConnection also caught Down, which ends the connection and not the session: the peer stays enrolled, `up` reconnects without going back to the IdP, and the token still belongs to the same NetBird identity. With a long cache TTL that cost the owner a fresh device-code flow for nothing, since the owner binding is what keeps the token away from other local accounts. Clear it on the two paths where the session really ends and the next one may belong to a different NetBird user: profile logout when the profile is the active one, and active-profile logout. SwitchProfile already cleared it on its own. * [client] Resolve the merge conflict in the profile-logout cleanup main extracted the inline profile-logout cleanup into cleanupAfterProfileLogout, which this branch had edited in place to clear the SSH JWT cache. Take main's helper and move the clear inside it. The helper returns early when the profile that was deregistered is not the active one, so the cache is still only cleared when the session that owns the token actually ends. * [client] Do not cache an SSH JWT obtained under a session that ended WaitJWTToken polls the IdP with s.mutex released, and that wait can run for as long as the user takes in the browser. A logout or a profile switch in the meantime clears the cache, but the poll then completed and stored its token anyway, so the entry the next session read belonged to the previous one. Give the cache a generation that clear advances. WaitJWTToken takes the generation before the wait and hands it back to store, which keeps the token only while the generation still matches. The two mutexes are distinct, so this was never a data race and the race detector could not have found it: the window is between two separately locked sections. * [client] Make the profile-switch test switch a profile SwitchProfile with a nil request skips switchProfileIfNeeded, so the test only covered the no-op path and would have passed with profile-transition invalidation broken. Create a second profile and name it in the request, then assert the active profile actually moved before checking the cache. Also correct the comment on the Down test: the logout handlers do call cleanupConnection. What changed is that clearing the cache is no longer one of the things cleanupConnection does. * [client] Take the SSH JWT cache generation when the flow is created WaitJWTToken read the generation after validating the device code, but the flow it belongs to is created earlier, in RequestJWTAuth, and SwitchProfile does not reset s.oauthAuthFlow. A profile switch between the two therefore advanced the generation before it was ever read: the guard compared the new session against itself and let the token through, which is the case it exists to stop. Record the generation on the flow when RequestJWTAuth creates it, and read it from there. The whole span from the request to the IdP answering now counts as one session for the cache. * [client] Correct two test comments the clear-on-Down change invalidated Moving the clear out of cleanupConnection left two comments describing the old behaviour: newTestServer said cleanupConnection clears the cache, and the comment above TestJWTCache_ClearDropsTheEntry listed Down among the callers of clear. Neither is true any more. * [client] Read the SSH JWT cache generation before the IdP round trip RequestJWTAuth read the generation where it stored the flow, which is after RequestAuthInfo has talked to the IdP. A logout or a profile switch during that call advanced the generation first, so the flow recorded the new session's value and the later store was accepted: the window moved rather than closed. Read it with the config, under the same s.mutex section. SwitchProfile holds that mutex across its own clear(), so the config and the generation cannot be torn apart by a switch.	2026-09-02 14:04:09 +02:00
Riccardo Manfrin	2bcea9d582	[client] add MDM configuration profile support (Windows registry + macOS plist) (#6374) ... * Initial scaffolding * Applies MDM override * Unit tests * Helpers business logic * Return error if trying to modify any config that is gated by MDM * Add ManagedFields to returned config over GetConfig * Adds initial 101 MDM policy business logic testing * gRPC MDM changes * MDM Name scoping for clarity * Implements windows loading of MDM policy * Adds missing WGPort config * Cleanup setupKey to align to linear * Align split tunnel code * Adds some log * Prefix every log with MDM * Adds debug config cobra command This can be useful for troubleshooting and checking config now that its resolution is not trivial defaults > config > env cars > CLI/UI > MDM * Adds MDM 1m diff checker & reloader * Adds also up/start after cancel * Publishes event for UI to sync upon MDM changes * Add events to resync UI to actual config This also provide fixup for UI no aligning to changed config when coming from cli up with config flags. * UI behavior conflicts relaxation UI sends full config snapshot with all values. It doesn't make sense to block it if the values are aligned with the values constrained by the MDM policy. It's just simplier to allow values that are compliant. (this goes for the CLI as well at this point) * Lock toggle Settngs * Advanced Settings locking * Fixup presharedkey * Apply MDM locks * Toggle gray in/out for Advanced Settings * Adds support for disabling of Profiles and UpdateSettings feature flags * Adds Gate Login as well when --disable-update-settings=true is given to service This commit tries to settle things with an old PR-4237 which had relaxed the case where the SetConfig returned an `Unavailable` code error. Under this circumnstance the PR allowed the upFunc to just emit a warning and progress further with the login gRPC. Since the login call is consuming the --management-url coming from the `up` command, it might be possible to abuse the "Unavailable" code to inject a management URL that is different from the configured one even though the --disable-update-settings is set to true (?) * Evaluate disable-update-settings errors only when there's an actual override * [UI] Fixup advanced Settings * [UI] Fixup for preshared key * [UI] Fixup for profile enable/disable toggle We need to align the initial state to evaluate the delta in case. The initial state has to be "true" since the profile starts visible. Then we receive MDM and transition the cache bool value to the actual MDM imposed state * Enforces disable networks * [UI] Aligns to "enable/disable once on change only" * Fixup: MDM wins. always * Removes --disable-advanced-settings It was a typo in our meetings. the actual thing is --disable-update-settings * [PROTO] Removes --disable-advanced-settings * [UI] Removes --disable-advanced-settings * Pins feat profile retrieval to notif event * [UI] Fix for "hide" not working when propagating to parent with children * Adds dep for reading plist files * Introduces support for darwing plist loading * Tests MDM config reload via ticker * [PROVISIONING] ADMX/ADML/PS/bash scripts/templates * CI fixes - Add docstrings to `mdm_integration` - refactor for cognitive complexity - mod tidy * Linting * Add docstrings to `mdm_integration` * nil,nil is no policy and no error. Allow it * nil,nil is no policy and no error. Allow it * exclude MDM profile adminstrated keys data from debug bundle * Fixes Rosenpass left disable after MDM unlock * Partial revert coderabbit added docstrings * Renaming fix * Avoid locking on clientRunning bool when the connection is aborted for whatever reason We want to just signal this through the giveUpChan, we will manage the signal from the waiter side and in case set it to false there. THis way we avoid locking, which should allow the MDM down+wait_for_term_chan_signal_+up procedure clientRunning is used to signal two different conditions here: 1. the initialization procedure is over (we have an engine) 2. the connection being up (or being attempted) Probably these two functionalities should not alias, and the failure of the second condition (because of any error) should just drive a reconnection (currently it's not happening, and we silently go idle). OR, mor probably, the two things are the SAME and there should not exist a case where we did the "Up" initialization and connection attempt but we are not still attempting it. * Moves test helper at te very bottom * Addresses github comments * No lock no copy * Prevents engine not stopping within 10 secs from being paired by another instance We instead juts SKIP updating the policy, so 1. the MDM ticker will kick in 1 minute time, 2. find the policy misaligned, 3. enter the onMDMPolicyChange, 4. find the s.clientRunning == true (because it is set to false only in server cleanupConnection, and not by s.actCancel()) 5. call s.actCancel() again if not nil 6. immediately return from <-s.clientGiveUpChan 7. finally call s.restartEngineForMDMLocked() * Since we ARE running there should be a config If the config was cancelled midflight, connect will abort later on * DisableAutoConnect should not stop a running connection. DisableAutoConnect should just avoid the connection attempts *when the service starts*. If we are started and we are up and running, DisableAutoConnect should not kick in. Another PR will follow about this topic * Removes unused vars * Moves callback into Run method arg * align comment to removal of DisableAutoConnect DisableAutoConnect should just avoid the connection attempts *when the service starts*. If we are started and we are up and running, DisableAutoConnect should not kick in * Removes unused managed_fields data. This was initially used to drive the UI but approach changed to reload config/features upon notifications which makes this data redundant. * Reorder stuff * Unexport unrequired vars/functions PoliciesEqual → policiesEqual AllKeys → allKeys * Adds list of MDM managed fields in the debug bundle	2026-06-12 12:28:49 +02:00
Zoltan Papp	fe9b844511	[client] refactor auto update workflow (#5448) ... Auto-update logic moved out of the UI into a dedicated updatemanager.Manager service that runs in the connection layer. The UI no longer polls or checks for updates independently. The update manager supports three modes driven by the management server's auto-update policy: No policy set by mgm: checks GitHub for the latest version and notifies the user (previous behavior, now centralized) mgm enforces update: the "About" menu triggers installation directly instead of just downloading the file — user still initiates the action mgm forces update: installation proceeds automatically without user interaction updateManager lifecycle is now owned by daemon, giving the daemon server direct control via a new TriggerUpdate RPC Introduces EngineServices struct to group external service dependencies passed to NewEngine, reducing its argument count from 11 to 4	2026-03-13 17:01:28 +01:00
Maycon Santos	15aa6bae1b	[client] Fix exit node menu not refreshing on Windows (#5553) ... * [client] Fix exit node menu not refreshing on Windows TrayOpenedCh is not implemented in the systray library on Windows, so exit nodes were never refreshed after the initial connect. Combined with the management sync not having populated routes yet when the Connected status fires, this caused the exit node menu to remain empty permanently after disconnect/reconnect cycles. Add a background poller on Windows that refreshes exit nodes while connected, with fast initial polling to catch routes from management sync followed by a steady 10s interval. On macOS/Linux, TrayOpenedCh continues to handle refreshes on each tray open. Also fix a data race on connectClient assignment in the server's connect() method and add nil checks in CleanState/DeleteState to prevent panics when connectClient is nil. * Remove unused exitNodeIDs * Remove unused exitNodeState struct	2026-03-09 18:39:11 +01:00