* Wraps syestem info / posture checks into a goroutine with timeout
e.checks = checks is set before doing the SyncMeta,
so if it fails next time isCheckEquals compares true and bypasses
the update. This is to avoid another repeating the 15 seconds hang.
The checks will be synced on reconnect or posture checks changes
push from mgmt.
* Propagate context to OS calls that can leverage its cancellation / timeout
* Distinguish timeout from cancellation in logs
* Dont log twice
* Block on timeout failure and reapply the exclude_ips
* Refactor for complexity
* [client] Filter link-local and multicast from network addresses
Skip IPv6 link-local and multicast addresses when building the peer
network_addresses list on non-iOS platforms, matching the existing iOS
behavior. A flapping NIC's link-local address otherwise churns the peer
meta on every interface up/down.
* [client] Skip engine restart when default route is unchanged
After the network monitor's debounce window, re-check the default next
hop before triggering a client restart. A flapping NIC that returns to
the same default route no longer forces a restart, avoiding redundant
sync stream reconnects and peer meta churn.
* [client] Exclude own overlay address from reported network addresses
The peer's own WireGuard overlay address (v4 and v6) was reported in
network_addresses. As the interface comes and goes during reconnects it
churned the peer meta on the management server. Drop it in
GetInfoWithChecks, matching the IP regardless of prefix length since the
engine knows the overlay address with the network mask while the
interface reports it as a host address.
* [client] Treat missing default route per protocol in next-hop check
A failed GetNextHop lookup is now treated as an absent route (zero
Nexthop) and compared per protocol, instead of forcing a restart. In a
single-stack network the missing IPv6 default route no longer counts as
a change on every debounce, which previously defeated the unchanged-route
check.
* [client] Make next-hop check injectable for network monitor tests
Move the next-hop comparison behind a NetworkMonitor field set by New(),
so tests can supply a stub instead of hitting the host's real default
route. Fixes the Event/MultiEvent tests hanging after the unchanged-route
check was added.
* Revert "[client] Make next-hop check injectable for network monitor tests"
This reverts commit 88a9d96e8f.
* Revert "[client] Treat missing default route per protocol in next-hop check"
This reverts commit 0fb531e4bc.
* Revert "[client] Skip engine restart when default route is unchanged"
This reverts commit a071b55f35.
* wip: add posture checks structs
* add netbird version check
* Refactor posture checks and add version checks
* Add posture check activities (#1445)
* Integrate Endpoints for Posture Checks (#1432)
* wip: add posture checks structs
* add netbird version check
* Refactor posture checks and add version checks
* Implement posture and version checks in API models
* Refactor API models and enhance posture check functionality
* wip: add posture checks endpoints
* go mod tidy
* Reference the posture checks by id's in policy
* Add posture checks management to server
* Add posture checks management mocks
* implement posture checks handlers
* Add posture checks to account copy and fix tests
* Refactor posture checks validation
* wip: Add posture checks handler tests
* Add JSON encoding support to posture checks
* Encode posture checks to correct api response object
* Refactored posture checks implementation to align with the new API schema
* Refactor structure of `Checks` from slice to map
* Cleanup
* Add posture check activities (#1445)
* Revert map to use list of checks
* Add posture check activity events
* Refactor posture check initialization in account test
* Improve the handling of version range in posture check
* Fix tests and linter
* Remove max_version from NBVersionCheck
* Added unit tests for NBVersionCheck
* go mod tidy
* Extend policy endpoint with posture checks (#1450)
* Implement posture and version checks in API models
* go mod tidy
* Allow attaching posture checks to policy
* Update error message for linked posture check on deleting
* Refactor PostureCheck and Checks structures
* go mod tidy
* Add validation for non-existing posture checks
* fix unit tests
* use Wt version
* Remove the enabled field, as posture check will now automatically be activated by default when attaching to a policy
* wip: add posture checks structs
* add netbird version check
* Refactor posture checks and add version checks
* Add posture check activities (#1445)
* Integrate Endpoints for Posture Checks (#1432)
* wip: add posture checks structs
* add netbird version check
* Refactor posture checks and add version checks
* Implement posture and version checks in API models
* Refactor API models and enhance posture check functionality
* wip: add posture checks endpoints
* go mod tidy
* Reference the posture checks by id's in policy
* Add posture checks management to server
* Add posture checks management mocks
* implement posture checks handlers
* Add posture checks to account copy and fix tests
* Refactor posture checks validation
* wip: Add posture checks handler tests
* Add JSON encoding support to posture checks
* Encode posture checks to correct api response object
* Refactored posture checks implementation to align with the new API schema
* Refactor structure of `Checks` from slice to map
* Cleanup
* Add posture check activities (#1445)
* Revert map to use list of checks
* Add posture check activity events
* Refactor posture check initialization in account test
* Improve the handling of version range in posture check
* Fix tests and linter
* Remove max_version from NBVersionCheck
* Added unit tests for NBVersionCheck
* go mod tidy
* Extend policy endpoint with posture checks (#1450)
* Implement posture and version checks in API models
* go mod tidy
* Allow attaching posture checks to policy
* Update error message for linked posture check on deleting
* Refactor PostureCheck and Checks structures
* go mod tidy
* Add validation for non-existing posture checks
* fix unit tests
* use Wt version
* Remove the enabled field, as posture check will now automatically be activated by default when attaching to a policy
* Extend network map generation with posture checks (#1466)
* Apply posture checks to network map generation
* run policy posture checks on peers to connect
* Refactor and streamline policy posture check process for peers to connect.
* Add posture checks testing in a network map
* Remove redundant nil check in policy.go
* Refactor peer validation check in policy.go
* Update 'Check' function signature and use logger for version check
* Refactor posture checks run on sources and updated the validation func
* Update peer validation
* fix tests
* improved test coverage for policy posture check
* Refactoring
* Extend NetBird agent to collect kernel version (#1495)
* Add KernelVersion field to LoginRequest
* Add KernelVersion to system info retrieval
* Fix tests
* Remove Core field from system info
* Replace Core field with new OSVersion field in system info
* Added WMI dependency to info_windows.go
* Add OS Version posture checks (#1479)
* Initial support of Geolocation service (#1491)
* Add Geo Location posture check (#1500)
* wip: implement geolocation check
* add geo location posture checks to posture api
* Merge branch 'feature/posture-checks' into geo-posture-check
* Remove CityGeoNameID and update required fields in API
* Add geoLocation checks to posture checks handler tests
* Implement geo location-based checks for peers
* Update test values and embed location struct in peer system
* add support for country wide checks
* initialize country code regex once
* Fix peer meta core compability with older clients (#1515)
* Refactor extraction of OSVersion in grpcserver
* Ignore lint check
* Fix peer meta core compability with older management (#1532)
* Revert core field deprecation
* fix tests
* Extend peer meta with location information (#1517)
This PR uses the geolocation service to resolve IP to location.
The lookup happens once on the first connection - when a client calls the Sync func.
The location is stored as part of the peer:
* Add Locations endpoints (#1516)
* add locations endpoints
* Add sqlite3 check and database generation in geolite script
* Add SQLite storage for geolocation data
* Refactor file existence check into a separate function
* Integrate geolocation services into management application
* Refactoring
* Refactor city retrieval to include Geonames ID
* Add signature verification for GeoLite2 database download
* Change to in-memory database for geolocation store
* Merge manager to geolocation
* Update GetAllCountries to return Country name and iso code
* fix tests
* Add reload to SqliteStore
* Add geoname indexes
* move db file check to connectDB
* Add concurrency safety to SQL queries and database reloading
The commit adds mutex locks to the GetAllCountries and GetCitiesByCountry functions to ensure thread-safety during database queries. Additionally, it introduces a mechanism to safely close the old database connection before a new connection is established upon reloading, which improves the reliability of database operations. Lastly, it moves the checking of database file existence to the connectDB function.
* Add sha256 sum check to geolocation store before reload
* Use read lock
* Check SHA256 twice when reload geonames db
---------
Co-authored-by: Yury Gargay <yury.gargay@gmail.com>
* Add tests and validation for empty peer location in GeoLocationCheck (#1546)
* Disallow Geo check creation/update without configured Geo DB (#1548)
* Fix shared access to in memory copy of geonames.db (#1550)
* Trim suffix in when evaluate Min Kernel Version in OS check
* Add Valid Peer Windows Kernel version test
* Add Geolocation handler tests (#1556)
* Implement user admin checks in posture checks
* Add geolocation handler tests
* Mark initGeolocationTestData as helper func
* Add error handling to geolocation database closure
* Add cleanup function to close geolocation resources
* Simplify checks definition serialisation (#1555)
* Regenerate network map on posture check update (#1563)
* change network state and generate map on posture check update
* Refactoring
* Make city name optional (#1575)
* Do not return empty city name
* Validate action param of geo location checks (#1577)
We only support allow and deny
* Switch realip middleware to upstream (#1578)
* Be more silent in download-geolite2.sh script
* Fix geonames db reload (#1580)
* Ensure posture check name uniqueness when create (#1594)
* Enhance the management of posture checks (#1595)
* add a correct min version and kernel for os posture check example
* handle error when geo or location db is nil
* expose all peer location details in api response
* Check for nil geolocation manager only
* Validate posture check before save
* bump open api version
* add peer location fields to toPeerListItemResponse
* Feautre/extend sys meta (#1536)
* Collect network addresses
* Add Linux sys product info
* Fix peer meta comparison
* Collect sys info on mac
* Add windows sys info
* Fix test
* Fix test
* Fix grpc client
* Ignore test
* Fix test
* Collect IPv6 addresses
* Change the IP to IP + net
* fix tests
* Use netip on server side
* Serialize netip to json
* Extend Peer metadata with cloud detection (#1552)
* add cloud detection + test binary
* test windows exe
* Collect IPv6 addresses
* Change the IP to IP + net
* switch to forked cloud detect lib
* new test builds
* new GCE build
* discontinue using library but local copy instead
* fix imports
* remove openstack check
* add hierarchy to cloud check
* merge IBM and SoftLayer
* close resp bodies and use os lib for file reading
* close more resp bodies
* fix error check logic
* parallelize IBM checks
* fix response value
* go mod tidy
* include context + change kubernetes detection
* add context in info functions
* extract platform into separate field
* fix imports
* add missing wmi import
---------
Co-authored-by: Zoltan Papp <zoltan.pmail@gmail.com>
---------
Co-authored-by: pascal-fischer <32096965+pascal-fischer@users.noreply.github.com>
* generate proto
* remove test binaries
---------
Co-authored-by: bcmmbaga <bethuelmbaga12@gmail.com>
Co-authored-by: Yury Gargay <yury.gargay@gmail.com>
Co-authored-by: Zoltan Papp <zoltan.pmail@gmail.com>
Send Desktop UI client version as user-agent to daemon
This is sent on every login request to the management
Parse the GRPC context on the system package and
retrieves the user-agent
Management receives the new UIVersion field and
store in the Peer's system meta
* moved wiretrustee version from main to system.info
* added wiretrustee version for all supported platforms
* typo corrected
* refactor: use single WiretrusteeVersion() func to get version of the client
Co-authored-by: braginini <bangvalo@gmail.com>
