Add a decision-flow guide for "NetBird feels slow" that helps a reader
find whether the tunnel, their own connection, a routing peer, or the app
is the real cause, instead of assuming NetBird is at fault.
The page leads with the path traffic takes, a one-minute Quick test that
resolves the two most common causes (a relayed peer, or the local
network), then a Start here checklist that links down to detail sections:
checking the connection with netbird status -d, setting a baseline with
iperf3 in both directions, isolating the slow hop, ruling out packet size
and inspecting firewalls, and separating startup delays from throughput.
Add a reusable PathFlow component that draws the hop-by-hop path as a
labelled icon flow, used for the overview, the routing-peer example, and
the recap. Wire the page into the docs sidebar and the troubleshooting
hub.
Co-authored-by: Claude Opus 4.8 <noreply@anthropic.com>
* docs: add clientless RDP for third parties use case guide
Covers publishing an internal RDP host as a TCP reverse proxy service
as an RDP gateway replacement for third parties that cannot install
the NetBird client: single-host resource, TCP service with auto-assigned
listen port, mandatory IP allowlist/CrowdSec restrictions, .rdp file
handover, and the L4 security boundaries (no SSO/PIN on TCP, port
re-rolls on service re-create, service publishing bypasses access
policies).
* docs: make CrowdSec conditional on broad allow rules, add UDP transport note
Review feedback: CrowdSec Enforce is redundant behind a strict single-IP
allowlist, so it is now recommended only when allow rules are broader.
Adds a note that RDP's optional UDP transport cannot be used through the
shared proxy cluster (independent auto-assigned listen ports) and that
clients fall back to TCP-only automatically.
* docs: update access control screenshot to match single-IP recommendation
* docs: scope the UDP transport limitation to the shared proxy cluster
Auto-assigned listen ports apply to the NetBird-hosted cluster only; a
BYOP cluster can bind a TCP and a UDP service to the same custom port.
* docs: UDP transport through a BYOP same-port service pair is verified working
Tested with mstsc against a BYOP cluster binding TCP and UDP services on
one custom port: the client negotiates the UDP transport through the
proxy, and removing the UDP service degrades cleanly to TCP-only. Also
notes the macOS client does not support the RDP UDP transport.
* docs: scope the macOS UDP claim to what was observed
* docs: macOS UDP claim holds with the app's UDP setting enabled
* docs: split into shared-proxy and BYOP use cases, drop client-specific UDP note
Adds a comparison of the two proxy deployments (auto-assigned port and
TCP-only vs custom ports and RDP UDP transport), a BYOP walkthrough with
the same-port TCP+UDP service pair, and keeps resource setup, access
restrictions, and verification shared between both paths.
* docs: clarify BYOP TLS requirement and service-domain resolution, grammar fixes
* docs: promote Agent Network in the sidebar and make sections collapsible
Rework the docs sidebar navigation:
- Render any nav group flagged `featured: true` as a highlighted card at the
top of the sidebar, with an optional `badge` label (currently Agent Network,
"New"). The flag is data-driven, so a future feature can take the spot by
moving two lines.
- Add a dropdown chevron to every collapsible menu, including the top-level
sections and the featured card, so it is obvious they expand.
- Collapse the top-level sections by default and expand the active one, so the
sidebar reads as a clean menu.
- Only render the active-page marker while its section is open, fixing the
orange highlight bar that lingered after collapsing an active section.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
* docs: make sidebar section toggles keyboard-accessible
The collapse toggle was a click-only span, so after sections collapse by
default keyboard and screen-reader users could not expand a section or reach
its links. Make each toggle a semantic button with aria-expanded and an
aria-label, which restores keyboard operation and announces the open state.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
* docs: keep sidebar sections expanded by default, collapse only Agent Network
Restore the original behavior where top-level sections start expanded and only
the nested sub-groups start collapsed, instead of collapsing everything. The
featured Agent Network card keeps its own isOpen: false so it starts collapsed.
The dropdown chevrons, featured card, and keyboard-accessible toggles are
unchanged.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 4.8 <noreply@anthropic.com>
* docs: move MDM deployment guides under Manage > Peers
The five fleet-deployment guides (GPO, macOS .pkg, Jamf Pro, Kandji,
Intune) lived under Integrations, but nothing in them integrates with
NetBird's platform — they are peer onboarding at scale, which lives
under Peers. The label also collided with Access Control's
'Integrate MDM & EDR', which uses MDM in the opposite sense.
- Move pages from /manage/integrations/mdm-deployment/ to
/manage/peers/mdm-deployment/ with a permanent wildcard redirect
- Re-point legacy /how-to redirects directly at the new paths
- Move the nav group under Peers as 'MDM Deployment'; remove the
now-empty Integrations group
- Update internal links
* docs: link full GPO deployment guide from MDM integration page
* docs: show setup-key secret wiring and replica naming for k8s routing peers
Fold the two verified-novel bits from the Access Infrastructure
autoscaling tutorial before purging it:
- Replace the 'use a secret' Note with the actual kubectl create
secret + secretKeyRef wiring (matches what the NetBird operator
injects for routing peers)
- In the HA section, note that removing the static NB_HOSTNAME lets
each replica register under its pod name (client falls back to
os.Hostname(), which is the pod name in Kubernetes)
* docs: purge redundant Access Infrastructure tutorials
The four pages under Manage > Peers > Access Infrastructure were
2024-era SEO tutorials that duplicated canonical feature docs and
carried outdated claims (pre-rewrite SSH model without the built-in
SSH server, a Docker section that never actually enrolls the
container with a setup key, CrowdStrike presented as the only EDR
integration, stale v0.29 output and vintage-UI screenshots).
Cross-checked each page against its canonical counterpart; nothing
novel remained (the two useful Kubernetes snippets were folded into
the routing-peers use case in the previous commit).
- Delete the four pages and their screenshot directory
- Remove the Access Infrastructure nav group
- Redirect each URL to its canonical replacement:
secure-remote-webserver-access -> /manage/peers/ssh
setup-keys-add-servers-to-network -> /manage/peers/register-machines-using-setup-keys
access-internal-resources-from-autoscaled-environments -> /use-cases/kubernetes
peer-approval-for-remote-worker-access -> /manage/peers/approve-peers
- Re-point the legacy /how-to redirects at the same targets to avoid
redirect chains
* docs: reorder Peers nav into enrollment, approval, day-2 flow
Group the five enrollment methods first (Add Peers, Setup Keys,
Bootstrap via Config File, MDM Deployment, Browser Client), then the
Approve Peers admission gate, then running-peer features (SSH, Lazy
Connections, Remote Jobs) and Auto Update last. Approve Peers
previously sat between two enrollment pages.
* docs: cross-link DNS aliases and internal DNS pages, fix tutorial inaccuracies
The two pages solve adjacent problems (NetBird-hosted records vs
forwarding to existing internal DNS) but never pointed at each other.
Add a which-page-do-I-need Note to each.
Also fix defects in the DNS Aliases tutorial found while cross-checking
it against the Custom Zones reference and dashboard source:
- 'Keep this enabled' implied search domain is on by default; it is
off by default (DNSZoneModal.tsx: enable_search_domain ?? false)
- Step 3 said 'wildcard resource' but the steps add exact-name domain
resources
- Wrong alt text ('Delete DNS Zone') on the zone-config screenshot
- Add missing meta description and a link to the Custom Zones
reference
* docs: align MSP portal page with 2026 partner program, rename For Partners nav
Cross-checked the MSP portal page against the 2026 MSP/MSSP Partner
Program document:
- Point the application link at netbird.io/use-cases/msp (the program's
canonical page) instead of a demo-form URL displayed as netbird.io/msp
- State tenant plan options (Team or Business) and the post-trial
minimum (Team plan with one user)
- Mention CSV/PDF usage export alongside the API
- Clarify the 3-day trial for existing accounts brought in as tenants:
it is a window to subscribe the tenant under the MSP account
- Add a subtle msp@netbird.io contact line at the bottom
Also rename the For Partners nav entries by deliverable instead of
audience (the section header already says who it's for): MSP Portal,
Distributor Portal, Deploy with Acronis.
* docs: update CLAUDE.md for agent-network, proxy.js, and tooling gaps
Audited every claim against the current repo. Stack, routing, security,
and convention claims all still hold; four gaps had accumulated:
- Add agent-network/ to the content structure list
- Document src/proxy.js in URL Routing: /api data requests must be
rewritten there because the config rewrite loses data-request context
on client-side navigation (Next.js #39669) and strips pageProps
- Add npm run lint:mdx; note npm run gen requires a Go toolchain
- Note fenced mermaid code blocks render as diagrams
* docs: address review findings on PR #906
- Move the MDM deployment screenshot directories to match the new page
paths; the URL rewrite had updated MDX image references without
moving the assets, breaking all Intune/Jamf/Kandji images
- Normalize pre-existing double slashes in Jamf and Kandji image URLs
- Align the routing-peers secret example with bootstrap-via-config-file
(same secret name, so both now use the NB_SETUP_KEY data key)
- DNS aliases: include the routing peer's group in the zone's
distribution groups. Verified in client source: the DNS route
interceptor (priority 100) outranks local zone records (priority 75)
and never falls through, so clients forward routed-domain queries to
the routing peer, which must receive the zone to answer
Turn "Commercial License" into a plain nav group and add an "Overview"
child pointing at /selfhosted/enterprise, above "Getting Started". This
matches the pattern already used by Networks, Cloud Marketplaces,
Observability, and Troubleshooting, where the section index page is
reachable as its own "Overview" link rather than only via the group
label.
* new: Windows GPO deployment guide under MDM for Deployment
* new: point GPO guide at the full policy key reference
* new: bold the example-posture disclaimer in GPO guide
* new: grammar and readability pass on GPO guide
* new: clarify AUTOSTART=0 vs Disable Autostart policy
* new: address review feedback on GPO guide install script and pinning
* docs: add Enterprise Commercial License overview page
Add a public, shareable overview of the NetBird Enterprise Commercial
License for teams evaluating self-hosted NetBird. Answers the questions
prospects ask most: in-place migration from the open source Community
Edition, zero-downtime control-plane upgrades via active-active HA,
control-plane behavior at scale, single-tenant boundaries and the
options for serving multiple customers, and how evaluation works.
Clarifies that the Cloud "Business plan" and the self-hosted commercial
license are different products, and lists what the license unlocks
(HA, SCIM, EDR/MDM integrations, traffic-flow logging, standard support).
Served at /selfhosted/enterprise and linked from the Self-Host sidebar.
* docs: qualify connection continuity by deployment topology
The single-server upgrade answer claimed all established connections
survive a restart. That holds only when Relay runs externally. In the
default combined deployment, netbird-server bundles Management, Signal,
and Relay, so recreating it restarts Relay and active relayed sessions
reconnect. Clarify that direct peer-to-peer connections continue either
way, while relayed-session continuity depends on whether Relay is
external or restarted with the combined server.
* docs: describe the commercial PoC as assisted, with 30-day default
"Managed proof of concept" overstated the offer. Per the EULA the
customer installs and runs the stack, with NetBird providing the license
and guidance, and a commercial PoC runs 30 days by default. Reword to
"assisted proof of concept" and state the default duration.
* Documentation for GRPC and JSON Sockets
* improve gRPC and HTTP/JSON socket documentation
* Update src/pages/client/grpc-socket.mdx
Co-authored-by: Nicolas Frati <nicofrati@gmail.com>
---------
Co-authored-by: Nicolas Frati <nicofrati@gmail.com>
Surface the existing /manage/reverse-proxy/troubleshooting page in the
Troubleshooting section: add it to the Connectivity sidebar group, and
move its hub chip from the Self-hosted card to Connectivity & networking
so the hub and sidebar agree.
The page covers reaching services exposed through routing peers, which
is a connectivity concern rather than self-hosted control-plane infra.
No new page and no duplicated content: both are pointers to the one
existing page.
Co-authored-by: Claude Opus 4.8 <noreply@anthropic.com>
New /help/recording-a-har-file how-to under Troubleshooting > Report a
bug, covering HAR capture in Chrome, Edge, Firefox, and Safari with the
"preserve log" gotcha and a security warning about tokens in HAR files.
Nest Community/NetBird Support under the Report a bug "Overview" item so
the new page reads as a sibling of the reporting cluster rather than a
fourth flat peer. Cross-link the HAR page from the two support pages and
the Report bugs overview, next to the existing debug-bundle mention.
Co-authored-by: Claude Opus 4.8 <noreply@anthropic.com>
Document the community.ansible_netbird collection for managing NetBird
resources (users, groups, setup keys, policies, networks, DNS, posture
checks) declaratively via the REST API. Adds a new Infrastructure as
Code subsection under Self-Host NetBird with room for future entries.
Cross-links from the Automated Setup PAT bootstrap page since the
collection is the natural next step after obtaining the first token.
* docs: add routing peer sizing guide
Add a Sizing Routing Peers page under Networks covering the four-step
sizing method, a per-peer capacity table, the tuning levers that matter,
and how to scale out by sharding load across identical Networks.
Cross-link it from How Routing Peers Work (HA note + related tile) and
the Networks overview, and add it to the docs navigation.
* docs: refine wording in routing peer sizing guide
Generalize the Acme example to remote users, correct the encrypt/decrypt
framing and reach the local network rather than the datacenter, use
'routing peer' instead of 'gateway', and rename the recap to Summary.
* docs: tighten and correct HA behavior in routing peer sizing guide
Correct the high-availability description: a single Network does not
balance load across its peers — different metrics give failover (one
peer carries all), equal metrics give latency-based nearest-peer
selection, which splits traffic by geography but never evenly. Shard
into more Networks to split load deterministically.
Also collapse redundant restatements, drop the secondary worked
example (the capacity table covers it), and slim the commodity-hardware
guidance.
* docs: add 1- and 2-vCPU rows to the routing peer capacity table
Extend the capacity table down to 1 and 2 vCPUs, drop the 'or more' from
the interface column, and adjust the methodology note so the interface
column reads uniformly as the minimum NIC to pair with each size.
* docs: add userspace WireGuard table and when-to-use cases
Add a userspace-mode capacity table showing wireguard-go does not scale
across cores (download plateaus ~6.8 Gbps, only ~4-5 cores used), and
the cases where a routing peer runs userspace: missing/broken/conflicting
kernel module, no TUN device (netstack, incl. rootless Docker), non-Linux
peers, and forcing userspace to capture policy IDs and blocked traffic
events. Name the exact benchmark CPU (Xeon Platinum 8375C).
* docs: replace 'sharding' with plain wording in sizing guide
Rename the Scaling out heading and reword the body, description, and
recap to talk about splitting load across more Networks instead of
sharding. Update the in-page anchor link to match the new heading.
* docs: clarify download/upload direction bullets in sizing guide
Lead each direction bullet with Download:/Upload: and say the routing
peer encrypts/decrypts, tying the pulling/pushing distinction to the
capacity table's column names.
* docs: replace 'shard' with plain wording in HA note
* docs: add jumbo frames section to routing peer sizing guide
* docs: align jumbo upload figure with capacity table, mark 16-vCPU line-rate as projection
* docs: use consistent numerals for MTU byte sizes
Adds the how-to under the reorganized /use-cases/remote-access group
(stacked on the Use Cases reorg). Walks through the decision ladder for
two sites sharing one internal IP, ending with the per-site TCP proxy
pattern on each routing peer.
* docs: consolidate scenario guides under /use-cases with redirects
Move 11 pages: feature-nested use cases from manage/networks,
manage/network-routes, manage/reverse-proxy, and the Kubernetes
integration into /use-cases/remote-access, /use-cases/cloud, and
/use-cases/security; the site-to-site decision page becomes
/use-cases/remote-access; the MikroTik guide becomes an install
guide at /get-started/install/mikrotik.
Add one redirect per moved page and flatten existing redirect
chains so every legacy URL resolves in a single hop. The
deprecated Routes site-to-site recipe stays put.
* docs: rebuild sidebar navigation for use-cases reorg
Remove the four nested Use Cases sublists from Manage NetBird;
keep the deprecated Routes recipe as a direct 'Site-to-Site
(legacy)' link. Rebuild USE CASES with Remote Access, Cloud &
Kubernetes, Security groups and a flat Homelab link. Add MikroTik
to Get Started > Platforms.
* docs: rebuild use-case index pages and refresh feature landing links
Turn /use-cases into an "I want to..." scenario finder. Retitle
the site-to-site decision page to Remote Access and point its
links at the new sibling URLs. Add the Kubernetes service and
private-proxy guides to the cloud and security indexes, refresh
the homelab landing links, and update the Networks, Routes,
Reverse Proxy, and Kubernetes landing pages to the new use-case
URLs.
* docs: update internal links to new use-case URLs
Point cross-links across the docs at the consolidated
/use-cases URLs. Links to the deprecated Routes site-to-site
recipe and all image paths under public/docs-static are left
unchanged.
* docs: shorten sidebar label to Site-to-Site
* docs: move Kubernetes into its own Use Cases section
Pull the entire Kubernetes integration out of Manage > Integrations
into a dedicated Kubernetes group under Use Cases at /use-cases/
kubernetes, and move the two Kubernetes cloud guides there too.
Rename the Cloud group (was 'Cloud & Kubernetes'); Integrations
keeps the MDM deployment pages. Add redirects for every moved page
and flatten existing chains.
* docs: drop 'NetBird on' prefix from cloud sidebar labels
* docs: alphabetize Remote Access use cases in sidebar
* ❯ add mikrotik to install index
* docs: fix duplicated word in remote-access link label on TV install pages
---------
Co-authored-by: Brandon Hopkins <brandon@techhut.tv>
* Add OpenWRT install steps
* Add images
* Fixes and caveats
* minor fixes
* docs: call it "the NetBird client", not "the NetBird client (agent)"
---------
Co-authored-by: Jack Carter <128555021+SunsetDrifter@users.noreply.github.com>
Document running a BYOP proxy in private mode with no public inbound
ports by disabling proxy ACME, issuing the wildcard TLS certificate
externally over DNS-01, and serving it as a static certificate that the
proxy hot-reloads on renewal.
Adds the page under reverse-proxy/use-cases with a new Use Cases nav
group, plus cross-links from the Bring Your Own Proxy page (port-443
prerequisite + TLS table) and the Reverse Proxy overview (static cert
mode).
* docs: add Highly Available Routing Peers use-case page (Kubernetes operator)
Add a standalone use-case page under a new Use Cases group in the Kubernetes
nav, covering how to run the operator's routing peers in HA: NetworkRouter
workloadOverride.replicas (default 3), the auto-created PodDisruptionBudget
(maxUnavailable: 1), equal-metric automatic failover, and spreading replicas
across failure domains via workloadOverride.podTemplate. Models least-privilege
(named destination group + access policy) rather than the All group.
* docs: add topology diagrams to HA routing peers page
Two SVG topology diagrams: replicas on a single node (single point of
failure) and replicas spread one-per-node via topologySpreadConstraints.
Embedded in Step 1 and the failure-domains section.
* docs: correct HA scheduling framing; drop single-node diagram
kube-scheduler spreads a Deployment's replicas across nodes by default
(best-effort, via built-in PodTopologySpread defaults). The earlier text/
diagram wrongly implied replicas co-locate by default. Reframe: multi-node
spread is the default; topologySpreadConstraints turns it into a guarantee
(or spans zones). Remove the single-node diagram (non-HA case, out of scope).
* docs: add Friendly DNS names appendix to HA routing peers page
Document exposing a service under a cleaner name via a CNAME in a custom
zone pointing at the operator's <service>.<namespace>.<zone> record (verified
end-to-end). Placed as an appendix for now; can move to a shared location later.
* docs: use ScheduleAnyway in spread example; note DoNotSchedule rollout deadlock
Multi-node verification: default scheduling already spreads replicas one-per-node;
the operator merges workloadOverride.podTemplate.topologySpreadConstraints into the
Deployment. DoNotSchedule with replicas == schedulable nodes deadlocks rolling updates
(surge pod can't place). Switch the example to ScheduleAnyway (verified clean rollout)
and document DoNotSchedule + the node-count/maxSurge caveat for a hard guarantee.
* docs: clarify custom-zone records are per-name (no whole-domain shadowing)
Verified on the lab: a NetBird custom zone serves only the records you add; other
names under the domain fall through to upstream DNS. Reusing a real internal domain
for friendly names is safe except for exact-name collisions.
* docs: expand into full 'Route to a Kubernetes service' how-to
Restructure the HA use-case page into an end-to-end guide covering the whole
journey: create the custom DNS zone, groups, and access policy (dashboard) ->
deploy HA routing peers (NetworkRouter, replicas:3) -> expose a Service
(NetworkResource) -> verify + failover. Generic, human-readable example names
(k8s.company.internal, kubernetes-clients/-services, network 'kubernetes',
nginx). Keeps the failure-domains diagram + ScheduleAnyway/DoNotSchedule note
and the friendly-DNS appendix. Adds <img> slots for 5 dashboard/terminal
screenshots (to be supplied). Renames the page + nav entry to
route-to-a-kubernetes-service; old slug removed.
* docs: add dashboard/terminal screenshots to the K8s how-to
Four screenshots (DNS zone, access policy, the kubernetes network with HA +
3 routing peers, kubectl pods-across-nodes). Drop the groups screenshot and
renumber the <img> refs to match.
* docs: swap in cleaner pods-across-nodes screenshot for Step 5
* docs: make node-spread central to the HA guide
Node-spread is the point of an HA guide, not a tail-end section. Move the
topology diagram up to 'What you'll achieve', fold the node-spread story into
Step 3 (deploy HA routing peers) - leading with the verified fact that the
scheduler spreads replicas across nodes by default (HA out of the box), with
topologySpreadConstraints as optional hardening - and drop the orphaned
'Spread across failure domains' section.
* docs: clarify the custom zone is created empty (operator fills the record)
Step 1 showed the auto-created A record without saying you don't enter it.
Note that you create only the zone (no hostname/IP/TTL by hand) and the
operator adds <service>.<namespace>.<zone> -> ClusterIP (5-min TTL) in Step 4.
* docs: replace Excalidraw topology with a custom dark-mode SVG
Hand-authored dark-background topology diagram (NetBird overlay -> routing
peers one-per-node -> Service) that matches the dark docs theme, replacing the
light Excalidraw-derived SVG. Removes the orphaned ha-routing-peers-spread-nodes.svg.
* docs: add CNAME dialog screenshot to the friendly-DNS appendix
Show the Add DNS Record dialog (CNAME 'app' -> nginx.default.k8s.company.internal)
and align the example hostname to 'app' to match.
* docs: drop maxSurge:0 workaround (not configurable via the operator)
The operator's workloadOverride only exposes annotations, labels, podTemplate,
and replicas — there is no hook for the Deployment's strategy.rollingUpdate.maxSurge.
Keep the achievable workaround (more schedulable nodes than replicas).
* docs: drop manual topology spread guidance (operator handles it by default)
* Restructure Troubleshooting into a hub with per-area pages
- Add a Troubleshooting hub (/help/troubleshooting) with icon/chip cards and a "Still stuck?" CTA
- Split NetBird Client troubleshooting into an overview + per-OS pages (Linux, Windows, macOS, Android, iOS)
- Split Self-hosted troubleshooting into an overview + per-area pages (installation, IdP, dashboard, certificates, connectivity, database)
- Split "Report bugs and issues" into Community Support and NetBird Support pages
- Add Troubleshooting resource connectivity and a NetBird Cloud pending-approval page
- Add DNS troubleshooting Issue 8 (Windows NRPT rule blocked by a lingering GPO)
- Cross-reference the new pages from networks, DNS, and reverse-proxy docs; update nav
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
* Address review: client terminology, dead props, labels, cross-links
- Use "client" instead of "agent" across the client troubleshooting pages (headings, prose, anchors)
- Remove unused source: props from the Troubleshooting hub tiles
- Relabel the "NetBird Cloud" grouping to "Cloud & identity" (SSO/provisioning also apply to self-hosted)
- Add a Tiles title on the report-bug landing; add reverse-proxy -> resource-connectivity cross-link
- Fix comma splices introduced by the em-dash cleanup in relayed-connections
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
* Add client-side hash redirect for moved self-hosted anchors
Old deep links like /selfhosted/troubleshooting#debugging-turn-connections now
forward to the per-area page, since next.config redirects can't act on the URL fragment.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
* Apply docs-skill review: conventions + reshape area pages
- "open source" (no hyphen), expand NRPT on first use, descriptive alt text + captions on TURN images
- Fix inherited "Netbird" casing in the client glossary
- Reshape the six self-hosted area pages to Symptom -> likely causes (ordered) -> Fix -> Confirm, preserving anchored headings
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
* Fix two typos in client glossary (CodeRabbit)
- "nunning" -> "running" in the glossary
- possessive "it's" -> "its" in the routing-table sentence
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
* docs: fix two broken links in troubleshooting pages
- database: point the "upgrade path" link at /selfhosted/maintenance/upgrade;
selfhosted-quickstart has no #upgrade anchor so the old link landed at page top
- client: add HashRedirect so old #net-bird-agent-status deep links forward to
the renamed #net-bird-client-status section on the same page
* docs: address review follow-ups (deep-link redirects + client casing)
- self-hosted troubleshooting: extend the HashRedirect map with the per-issue
(###-level) anchors from the old single page, so old deep links land on the
exact sub-section of the new area page rather than just the page top
- client glossary: lowercase "NetBird client" in the peer-a/peer-b entries
(house convention) and fix "linux" -> "Linux"
* docs: review polish — fix image class + first-use acronym glosses
- connectivity: fix bad CSS class imagewrapper-nig -> imagewrapper on the
TURN-test screenshot (the typo'd class matched no style and broke zoom)
- gloss acronyms on first use: GPO (DNS Issue 8), IdP/SSO (identity-provider),
ACME (certificates), CORS (dashboard)
---------
Co-authored-by: Claude Opus 4.8 <noreply@anthropic.com>
Co-authored-by: Jack Carter <128555021+SunsetDrifter@users.noreply.github.com>
The /selfhosted/environment-variables reference page had no inbound
links and was only reachable by direct URL or search. Add it under
Maintenance, after Configuration Files.
* docs: add routing-peer self-access and Active Directory guides
New use-case guides: reaching a service on a routing peer's own LAN IP
(route + peer-to-peer policy + NB_ENABLE_LOCAL_FORWARDING) and an
end-to-end Active Directory / Windows file shares guide over NetBird.
Clarify domain-resource DNS: with Routing Peer DNS Resolution on, the
routing peer answers the client's A/AAAA lookups (a domain resource
matches the exact name; use a wildcard for hostnames under a domain),
but AD still needs a nameserver group for the SRV/DC-locator records.
Add navigation entries, overlay-vs-LAN-IP notes, and ICMP/ping
troubleshooting guidance.
* docs: fix WireGuard anchor slug and sharpen local-forwarding caution
The #why-wireguard-with-netbird anchor doesn't resolve — the heading
slugifies to #why-wire-guard-with-net-bird (decamelized). Fix it in the
networks intro and the netbird-vs-traditional-vpn self-link.
Clarify the NB_ENABLE_LOCAL_FORWARDING caution: with it on, any permitted
peer can reach services bound to the routing peer's own addresses,
including 127.0.0.1, at the peer's NetBird IP.
* docs: polish routing-peer and Active Directory guides
- Correct the DC policy note: TCP/UDP need separate policies because a
policy carries one protocol, not because of a first-rule limitation
- Make internal-dns-servers the canonical A/AAAA-vs-SRV explanation;
collapse the three duplicates to one-line pointers
- Trim emphatic bold to enumerated requirements, ports, and flags
- Reduce em-dash density and clarify the routing-peer SSH-management
and HA cautions in the AD guide
* docs: make Active Directory guide clearer for junior admins
- Rewrite the Verify section to explain why (test as the signed-in
domain user, port 445 vs ping, name vs IP) instead of assuming
ICMP/Kerberos/NTLM knowledge
- Clarify the SSH-management and HA cautions in Step 3
- Note Get-DfsnFolderTarget needs the DFS Management tools (RSAT),
not just any domain-joined machine
- Reduce em-dash density throughout
* docs: Routing Peer DNS Resolution applies to all domain resources, not just wildcards
* docs: refine Active Directory guide and nameserver terminology
- Step 3 DC ports as a Port/Protocol/Needed-for table; promote 123
(time sync) and 464 (kpasswd) into the baseline
- DFS step: derive each target server's FQDN for the domain resource
- order the agent-placement and reachability shapes consistently
(dedicated routing peer first)
- drop the niche SSH-wedge caution and the premature masquerade note
- tie the ping/ICMP caveat to the port-scoped policies
- use "Nameserver" + "match domain" (the UI term) instead of
"nameserver group" across the AD, internal-DNS, and reach-services pages
* docs: scope the local-forwarding caution — loopback exposure is netstack-only
Reaching the routing peer's own 127.0.0.1-bound services via its NetBird IP
only happens on netstack-mode peers; on userspace-TUN (Windows/macOS) it does
not (verified), and Linux kernel mode is a no-op. The general "exposes own
addresses" caution stands; drop the over-broad 127.0.0.1/localhost specifics.
* docs: trim DC-through-routing-peer section to the DNS-only reason and reorder AD subsections
Drop the setup-flavored framing from 'Reaching a Domain Controller
through a routing peer' (it lives on the AD use-case page), keeping the
DNS reference fact: A/AAAA resolves on the routing peer but SRV/DC-locator
records don't, so AD still needs a nameserver to the DC. Heading text is
unchanged so the existing anchor still resolves. Reorder the AD & Domain
Controllers subsections to lead with the recommended case (reach the DC
through a separate routing peer), then the discouraged DC-as-routing-peer
path, then its WireGuard port-conflict troubleshooting.
* docs: drop redundant cross-link from AD Step 4 nameserver note
The note already explains why a domain resource doesn't remove the
nameserver requirement (SRV/DC-locator records). The trailing link to the
DNS page's 'Reaching a Domain Controller through a routing peer' section
just repeated that fact and linked back here, bouncing the reader. Step 4
already links to Internal DNS Servers for the general setup.
* docs: restructure AD routing-peer guidance — least-privilege tiers, DC route/policy split, de-loop cross-links
Active Directory & Windows File Shares:
- Add a TL;DR linking to a new 'The four settings' checklist at the bottom.
- Split Step 3 into Step 3 (route the DC) and Step 4 (allow the AD ports);
DNS becomes Step 5. Keeps the route distinct from the access policies.
- Step 2: break each routing-peer case into sub-bullets of what's needed;
point the self-access case to Reach Services on the Routing Peer.
- Step 3: present /32 or apex domain as the granular default and the
*.corp.example.com wildcard as the least-privilege opt-in — and spell out
the wildcard's one-policy-scope cost (uniform ports across the whole domain).
Reach Services on the Routing Peer:
- Tighten the setup steps; concrete DNS-nameserver instruction for AD/DFS;
state the Linux kernel-mode default for NB_ENABLE_LOCAL_FORWARDING.
- 'recipe' -> 'setup' throughout.
Internal DNS Servers:
- Clarify nameserver vs plain share: A/AAAA via the routing peer needs no
nameserver; AD needs one for SRV records and because the resolver won't
fall back. Distribute the nameserver to the routing peer's group *and*
client groups that resolve directly; only when the peer can't resolve on
its own. Reorder AD subsections; fix the overbroad distribution note.
How Routing Peers Work / cross-links:
- Remove redundant/circular cross-links across the four pages (the
HRPW -> Internal DNS -> Active Directory -> HRPW loop).
* docs: use "NetBird client"/"clientless" wording in AD and self-access guides
Replace 'the agent'/'agentless' with the preferred 'NetBird client'/'clientless' terms, and add the missing blank line before the Step 2 heading.
* docs: lower altitude of routing-peer/AD guides for junior admins
- Unify the overlay address as 'NetBird IP' and the local one as 'LAN IP' across the routing-peer/DNS pages; add a 2-line two-address primer to the two crux pages.
- Replace the dense userspace/netstack/kernel forwarding sentence with a platform table framed to the self-access case, plus a netstack-override footnote.
- Demote the wildcard policy-scope trade-off in the AD guide to a Note, keeping the granular-first nudge in the main flow.
- Split the 'Reaching a DC through a routing peer' paragraph into what-it-needs / why-a-domain-resource-isn't-enough bullets.
- De-duplicate the self-access section: it now owns the mental model and points to the use-case page for the concrete setup.
* docs: clarify the forwarding section for junior admins
- Disambiguate NB_ENABLE_LOCAL_FORWARDING from the IP-forwarding sysctl by naming the setting explicitly before the table.
- Split local forwarding into its own '### Local forwarding' subheading, distinct from '### IP forwarding'; repoint the #local-forwarding cross-link.
- Drop the netstack-specific override footnote — edge-case reference material that doesn't help the target reader (the row already names the correct flag).
* docs: apply review feedback to routing-peer/AD guides
- AD Step 4: list the AD ports per TCP/UDP access control policy instead of a dense one-rule-per-policy sentence; add 123 to the four-settings recap.
- De-duplicate the route+policy+local-forwarding triad within how-routing-peers-work (Local forwarding now points to the canonical statement); render the LAN-IP requirements as a sub-list.
- Plain-language rewrite of why a domain resource isn't enough for AD DNS.
- Qualify Global Catalog 3268/3269 to multi-domain forests; state the default branch in AD Step 1.
- Fix the Networks Tiles description to say 'NetBird client', not 'agent'.
- Add DNS troubleshooting Issue 7 for the AD symptom (login/DFS fails but file-by-IP works), cross-linked to the AD guide and the DC section.
* docs: recast AD "four settings" as an explicit NetBird config checklist
Rename the summary to 'What you configure in NetBird' and list the discrete NetBird objects: routing peer, a route (resource) to the file server and to the DC, separate access control policies for each, and a DNS nameserver. Keep the full AD port set in Step 4 only; update the TL;DR link to the new (decamelized) anchor.
* docs: clarify the self-access setup steps
- Identify NB_ENABLE_LOCAL_FORWARDING as an environment variable and link the Client Environment Variables reference.
- Front-load the platform on step 3 (Windows/macOS need the flag; Linux kernel forwarding doesn't, only netstack) and soften the 'all three required' framing accordingly.
- Explain that steps 1 and 3 exist only because clients reach the file server at its LAN IP; reaching a peer at its NetBird IP needs only the policy.
* docs: rename Network Routes to Routes, deprecate, and relocate Browser Client Architecture
- Rename the docs sidebar entry "Network Routes" to "Routes" and the page H1
- Add a deprecation note to the Routes page: all use cases except exit nodes
have moved to Networks; reconcile the body framing accordingly
- Move Browser Client Architecture under Peers > Browser Client
(/manage/peers/browser-client/architecture), nest the nav, add a redirect,
and update cross-links
- Shrink the site-to-site Architecture diagram boxes to fit their content
* docs: rename Routes nav 'Concept' link to 'Overview'
* docs: add Troubleshooting relayed connections teaching page
Adds a help-section teaching doc that walks junior admins from
'Connection type: Relayed' to a fixed P2P connection (or a justified
stop): mental model, the four players (NAT/Signal/STUN/Relay), ICE
candidate reading, an elimination-based decision flow, a port-forwarding
escape hatch, a worked walkthrough, and when relay is the right answer.
Moves the troubleshooting-oriented sections (Checking Your Connection
Type, Tips for Improving P2P Success) out of Understanding NAT and
Connectivity, leaving it purely conceptual with pointers to the new
page. Adds sidebar entry and a pointer from troubleshooting-client.
* fix: correct nftables example for STUN outbound rule
The STUN service runs on UDP 80/443/3478/5555, but the example rule
allowed TCP/443. Also note that nftables resolves hostnames at
ruleset-load time only, which matters for a dynamic geo-distributed
endpoint pool.
Create a standalone User Roles reference covering all six roles (Owner,
Admin, Network Admin, Billing Admin, Auditor, User) with a permission
matrix aligned to the current dashboard, per-role sections, API/token
notes, and role-assignment steps.
Reduce the role section on the Add Users page to a pointer (keeping the
existing anchor), repoint inbound links from delete-account,
control-center, and msp-portal, add the page to the Team sidebar, and
refresh the role screenshots.
