* docs: rebuild connecting-from-the-office on Networks
The page walked the legacy Network Routes flow: create a route, assign
distribution groups, and gate the routing-peer policy. Networks is the
current model, and there was no Networks version of this use case
anywhere in the docs.
Rewritten around the Networks building blocks: the posture check hangs
off the access policy whose destination is the office resource, so the
route is not distributed while the device is on site. Adds a limits
section (re-evaluation delay after a network change, ranges carry no
identity, platform coverage) and a summary. Drops the three legacy
route-UI screenshots.
* docs: Android reports local network addresses from 0.77.1
PR #7235 landed the Android side of PeerNetworkRange: the client now
parses local interface addresses from the host app's interface
discovery, so NetworkAddresses is no longer empty. First release
containing it is v0.77.1.
Scopes the known limitation to Android clients older than 0.77.1 and
leads with the fix, mirroring how the iOS 0.69.0 note reads. Also
matches the posture check name in the office guide to the screenshot.
* docs: correct client command, alt text and wording in the office guide
netbird routes is a deprecated alias; the command is netbird networks
list. Alt text now describes what each screenshot actually shows, and
the check name, Wi-Fi spelling and description line are consistent.
* docs: use documentation-only public ranges, scope the Android note in the Zero Trust guide
1.0.0.0/24 and 3.0.0.0/23 are allocated space and a reader can copy
them into a Block check, so the public-block examples now use RFC 5737
documentation ranges.
The Zero Trust guide still stated the Android limitation
unconditionally, which contradicted the posture check reference after
0.77.1.
* docs: tighten the office guide and the Android limitation
Scopes the intro claim to what the page's own screenshots show, stops
overstating what netbird networks list reports, restores the
platform-targeting bullet with Android 0.77.1 included, and leads the
Android section with the version scope so it reads correctly under
Known Limitations.
* docs: do not present macOS interface names as cross-platform
utun100 is the macOS default (client/iface/configurer/name_darwin.go);
wt0 is the default everywhere else. The verify section now names both
once, and the summary talks about the local link and the NetBird
interface instead of en0 and utun100.
* docs: standardize on "NetBird client" over "agent" for the client software
* docs: address review feedback
- fix "a software" grammar and use lowercase "NetBird client"
- define routing peer as a peer whose client bridges, keeping peer and client distinct
- correct kernel-space claim: the kernel WireGuard data path is what runs in the kernel
- clarify which address the application uses to reach the SOCKS5 proxy from a separate container
* docs: add persistent-route guidance for clientless devices and align site-to-site on Networks
Step 5 of both site-to-site guides (and the masquerade page) now walk a
first-time admin through persisting a Linux static route end to end:
detect Netplan vs systemd-networkd with `ls /etc/netplan/`, then a clear
Option A / Option B that are framed as alternatives, with the exact
editing mechanics (open in nano, save/exit keys, or a one-paste
systemd-networkd drop-in). Standardize on the `<IFACE>` placeholder with
an `ip -br addr` hint so a literal `eth0` can't silently misconfigure
hosts using predictable interface names.
Update the site-to-site use-case hub to recommend Networks for all
non-exit-node scenarios, rename "Network Routes" to "Routes", and
reconcile the comparison section with the Routes deprecation.
* docs: promote Routes site-to-site recommendation to a deprecation warning
Move the 'use Networks instead' callout above the Architecture section
and make it a Warning, matching the Routes deprecation. Keep the legacy
no-Policy nuance and the Site-to-VPN pointer; rename Network Routes to Routes.
* docs: correct Networks scenario support and mark Routes deprecated
- advanced-configuration: Networks supports all scenarios (VPN-to-Site,
Site-to-VPN, Site-to-Site), not VPN-to-Site only
- how-routing-peers-work: Routes labeled deprecated, not 'still supported'
* docs: import Note explicitly in site-to-site use-case page
Addresses CodeRabbit: <Note> was used without an explicit import from
@/components/mdx, relying on the global MDX provider.
* docs: repoint site-to-site cross-links to Networks
Site-to-site moved to Networks; update the homelab and cloud use-case
tiles/table and the access-home-devices and cloud-to-on-premise Next
Steps links to /manage/networks/use-cases/site-to-site.
* docs: rename Network Routes to Routes in prose and repoint advanced-config links
Bucket A rename (display text only): rename the 'Network Routes' feature
name to 'Routes' across prose, link labels, table cells, alt text, Tiles
names, and code comments. Headings are deliberately left unchanged to
avoid breaking anchors and inbound links; URL paths (/manage/network-routes)
are unchanged. Generic routing-table mentions and the desktop system-tray
UI label are left as-is.
Also repoint the access-home-devices and cloud-to-on-premise 'Advanced
configuration' Next Steps links from the Routes advanced-config page to
/manage/networks/masquerade.
* Update site-to-site documentation for clarity
Removed outdated information about using Routes for site-to-site connections.
* Update src/pages/manage/networks/use-cases/site-to-site.mdx
Co-authored-by: coderabbitai[bot] <136622811+coderabbitai[bot]@users.noreply.github.com>
* Update section title from 'Networks vs Network Routes' to 'Networks vs Routes'
---------
Co-authored-by: coderabbitai[bot] <136622811+coderabbitai[bot]@users.noreply.github.com>
* bulk text edit to fit new flows
* Updated screenshots, some minor docs fix. (#782)
* Update Settings on site-to-site.mdx
* fix image names and embedded links
* Update high level dia
* general dashboard images and auto-update stucture fix
* remove temp audit file
---------
Co-authored-by: PizzaLovingNerd <cameron@stillhq.io>
Add a 'When Posture Checks Are Evaluated' section to the posture checks
page covering connect/login evaluation, immediate distribution of changes,
and the connection-time evaluation caveat for mid-session state changes.
Add a 'How Policy Changes Are Distributed' section to the access control
overview covering event-driven push, no redistribution interval, and
change coalescing. The two sections cross-link.
* fix: replace invalid <p> wrapping Button with <div>
The Button component renders a <div> in its primary variant. HTML
disallows block elements inside <p>, so browsers auto-close the <p>
during parsing and React 19 reports a hydration mismatch. The
float="center" attribute was non-functional, so rendering is unchanged.
* chore: gitignore .playwright-mcp run artifacts
House style writes "Zero Trust" / "zero trust" without a hyphen
in prose. Sweep all hyphenated prose occurrences under `src/pages/`
to match.
URL slugs (e.g. `/use-cases/security/implement-zero-trust`) and
external links (CrowdStrike press release / blog URLs that include
`zero-trust` as a path segment) are intentionally preserved.
Earlier docs asserted that policies using `ALL`, `ICMP`, or portless
`TCP`/`UDP` must be bidirectional. Data-plane testing on NetBird
0.59.10 shows the engine honors the direction flag for every
protocol — peer-d's iptables only installs the destination-side
`ACCEPT` rule, so reverse-initiated traffic is dropped at the source
even when the policy uses `ALL` or `ICMP`. The greyed-out direction
toggle in the dashboard is a UX guardrail, not an enforcement gap.
- manage-network-access.mdx: rewrite the Policies overview and
Multiple Mesh Networks paragraphs; drop the outdated `Note`
callout; trim Creating Policies guidance.
- access-control/index.mdx: rewrite Protocol-Specific Behavior;
drop the "Always Bidirectional (regardless of UI setting)" list.
- implement-zero-trust.mdx: soften TCP/UDP+ports framing.
- troubleshooting-client.mdx: drop "always true for the protocol
`ALL`" clause from the bidirectional-rule bullet.
Network-resource (routing peer) policies remain genuinely
unidirectional — that statement preserved.
* Add force approval docs
* add force approval
* add filter and batch operation
* Rename force approval docs to bypass compliance
- Rename force-approval.mdx to bypass-compliance.mdx
- Update navigation title from "Force Approval" to "Bypass Compliance"
- Update all internal links to use new path
- Update image paths to /bypass-compliance/
- Update terminology in EDR integration docs
* add images
---------
Co-authored-by: Ashley Mensah <ashleyamo982@gmail.com>
Users commonly run services (Pi-hole, Home Assistant, monitoring) on
routing peer machines but have no guidance that a network resource policy
only grants access to the network behind the peer, not the peer itself.
Add notes to Networks, Network Routes, Access Control, and the Zero
Trust guide clarifying that a peer-to-peer access policy is needed.
Co-authored-by: Claude Opus 4.6 <noreply@anthropic.com>
* Streamlined site-to-site docs in new dedicated section. Removed old use-case guide and added redirects
* restructure use-cases, move network use cases to network sections
* Reorganize network routes and networks documentation structure
- Restructure use cases into by-scenario and by-configuration folders
- Reorganize images to match new doc structure (concepts, by-scenario, by-resource-type)
- Add screenshots for site-to-site guides (home, office, cloud)
- Add policy screenshots for networks use cases
- Update site-to-site docs to use two separate policies instead of bidirectional
- Fix Access Control Groups to use correct destination groups
- Move "Self-Hosted vs Cloud" page to about section
- Update navigation and add redirects for moved pages
- Add CLAUDE.md for Claude Code guidance
* cleaned up network docs/image folder structure
* Align site-to-site use case links and redirects
Co-authored-by: Cursor <cursoragent@cursor.com>
* Update CLAUDE.md with accurate project details
Fix Next.js version (14 → 16), add React 19/Tailwind/Pages Router
details, document MDX page conventions, image paths, and note
absence of test suite.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* Fix broken images and hydration error on networks page
- Restore 6 network index images accidentally deleted in 4116092
- Fix keycloak image filename typo (keycloack -> keycloak)
- Fix hydration mismatch by replacing invalid <p><div> nesting with <div>
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* Fix 4 broken internal links found in PR review
- Fix missing by-scenario/ segment in site-to-site-home and
site-to-site-office Tile hrefs (network-routes use-cases index)
- Fix lazy-connections typo to lazy-connection (implement-zero-trust)
- Update stale redirect link to direct path for access-control
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
---------
Co-authored-by: Jack Carter <128555021+SunsetDrifter@users.noreply.github.com>
Co-authored-by: Cursor <cursoragent@cursor.com>
Co-authored-by: Claude Opus 4.6 <noreply@anthropic.com>
* New Access Control and ReOrg
* Enhance Access Control Documentation and Add New Resources
- Updated `next.config.mjs` to include new redirects for access control documentation.
- Added multiple images related to access control and endpoint detection and response.
- Refactored links in various documentation files to point to the new access control structure.
- Removed outdated documentation files and created new ones for managing access control and endpoint detection.
- Introduced a new section for understanding posture checks and their implementation in access control.
This commit aims to improve the organization and clarity of access control resources, aligning with the recent restructuring of documentation.
* Remove outdated Intune MDM documentation and update links in access control resources. This commit enhances the organization of the documentation by eliminating obsolete files and ensuring all references to Microsoft Intune are correctly aligned with the new structure.
* Fix typos in access control documentation for clarity and accuracy. Updated "Understnading" to "Understanding" and corrected "NerBird" to "NetBird" in relevant sections.
* Fix typo in Access Control section
* Fix formatting in posture checks documentation
* Added a space in the Posture Checks reference for clarity.
Jack Carter